Study_Students

SMARTHOUSE_LIGHTS

Table of contents

1. About the project
   • Built with
2. Getting started
   • Prerequisites
   • Installation
3. Usage

About the project

This application provides a web-interface to control LED Lights connected to Raspberry Pico.

Built with

• Poetry
• FastApi

Getting started

To get a local copy up and running follow these steps.

Prerequisites

• Python
• pip
• Poetry (pip install poetry)

Installation

ALL FOLLOWED COMMANDS MUST BE USED IN PROJECT DIRECTORY

1. Clone the repository

   git clone https://github.com/GASTER2302/Study_Students.git

2. Install python packages

   poetry install

3. Download MicroPython and load it to your Pico.

4. Load files from Pico directory to your Pico.

Usage

To start the application in VS Code:

1. Add poetry virtual interpritator as your interpritator.

2. Change COM Port to the port you connected to the Pico.

3. Change Pin and count of LEDs on led_strip_controller.py file at your Pico.

4. Start the application:

```sh
python -m uvicorn app.main:app --host 0.0.0.0 --port 8000 --reload
```

5. Go to localhost:8000 and enjoy!