Merge tag 'v4.9.110' into 4.9-2.0.x-imx #28

gibsson · 2018-06-26T15:43:51Z

Just realized they just released a new stable version.
We're about to rebase our patches on top of this for official release.
Thanks!

With the recent sync with objtool from 4.14.y, the objtool .gitignore file was forgotten. Fix that up now to properly handle the change in where the autogenerated files live. Signed-off-by: Greg Kroah-Hartman <[email protected]>

@offset

[ Upstream commit d9f9277 ] syzbot found a way to trigger an infinitie loop by overflowing @offset variable that has been forced to use u16 for some very obscure reason in the past. We probably want to look at NEXTHDR_FRAGMENT handling which looks wrong, in a separate patch. In net-next, we shall try to use skb_header_pointer() instead of pskb_may_pull(). watchdog: BUG: soft lockup - CPU#1 stuck for 134s! [syz-executor738:4553] Modules linked in: irq event stamp: 13885653 hardirqs last enabled at (13885652): [<ffffffff878009d5>] restore_regs_and_return_to_kernel+0x0/0x2b hardirqs last disabled at (13885653): [<ffffffff87800905>] interrupt_entry+0xb5/0xf0 arch/x86/entry/entry_64.S:625 softirqs last enabled at (13614028): [<ffffffff84df0809>] tun_napi_alloc_frags drivers/net/tun.c:1478 [inline] softirqs last enabled at (13614028): [<ffffffff84df0809>] tun_get_user+0x1dd9/0x4290 drivers/net/tun.c:1825 softirqs last disabled at (13614032): [<ffffffff84df1b6f>] tun_get_user+0x313f/0x4290 drivers/net/tun.c:1942 CPU: 1 PID: 4553 Comm: syz-executor738 Not tainted 4.17.0-rc3+ Freescale#40 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:check_kcov_mode kernel/kcov.c:67 [inline] RIP: 0010:__sanitizer_cov_trace_pc+0x20/0x50 kernel/kcov.c:101 RSP: 0018:ffff8801d8cfe250 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffff8801d88a8080 RBX: ffff8801d7389e40 RCX: 0000000000000006 RDX: 0000000000000000 RSI: ffffffff868da4ad RDI: ffff8801c8a53277 RBP: ffff8801d8cfe250 R08: ffff8801d88a8080 R09: ffff8801d8cfe3e8 R10: ffffed003b19fc87 R11: ffff8801d8cfe43f R12: ffff8801c8a5327f R13: 0000000000000000 R14: ffff8801c8a4e5fe R15: ffff8801d8cfe3e8 FS: 0000000000d88940(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 00000001acab3000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: _decode_session6+0xc1d/0x14f0 net/ipv6/xfrm6_policy.c:150 __xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:2368 xfrm_decode_session_reverse include/net/xfrm.h:1213 [inline] icmpv6_route_lookup+0x395/0x6e0 net/ipv6/icmp.c:372 icmp6_send+0x1982/0x2da0 net/ipv6/icmp.c:551 icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43 ip6_input_finish+0x14e1/0x1a30 net/ipv6/ip6_input.c:305 NF_HOOK include/linux/netfilter.h:288 [inline] ip6_input+0xe1/0x5e0 net/ipv6/ip6_input.c:327 dst_input include/net/dst.h:450 [inline] ip6_rcv_finish+0x29c/0xa10 net/ipv6/ip6_input.c:71 NF_HOOK include/linux/netfilter.h:288 [inline] ipv6_rcv+0xeb8/0x2040 net/ipv6/ip6_input.c:208 __netif_receive_skb_core+0x2468/0x3650 net/core/dev.c:4646 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4711 netif_receive_skb_internal+0x126/0x7b0 net/core/dev.c:4785 napi_frags_finish net/core/dev.c:5226 [inline] napi_gro_frags+0x631/0xc40 net/core/dev.c:5299 tun_get_user+0x3168/0x4290 drivers/net/tun.c:1951 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1996 call_write_iter include/linux/fs.h:1784 [inline] do_iter_readv_writev+0x859/0xa50 fs/read_write.c:680 do_iter_write+0x185/0x5f0 fs/read_write.c:959 vfs_writev+0x1c7/0x330 fs/read_write.c:1004 do_writev+0x112/0x2f0 fs/read_write.c:1039 __do_sys_writev fs/read_write.c:1112 [inline] __se_sys_writev fs/read_write.c:1109 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1109 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Cc: Steffen Klassert <[email protected]> Cc: Nicolas Dichtel <[email protected]> Reported-by: [email protected] Signed-off-by: Steffen Klassert <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 94c752f ] strlcpy() can't be safely used on a user-space provided string, as it can try to read beyond the buffer's end, if the latter is not NULL terminated. Leveraging the above, syzbot has been able to trigger the following splat: BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline] BUG: KASAN: stack-out-of-bounds in compat_mtw_from_user net/bridge/netfilter/ebtables.c:1957 [inline] BUG: KASAN: stack-out-of-bounds in ebt_size_mwt net/bridge/netfilter/ebtables.c:2059 [inline] BUG: KASAN: stack-out-of-bounds in size_entry_mwt net/bridge/netfilter/ebtables.c:2155 [inline] BUG: KASAN: stack-out-of-bounds in compat_copy_entries+0x96c/0x14a0 net/bridge/netfilter/ebtables.c:2194 Write of size 33 at addr ffff8801b0abf888 by task syz-executor0/4504 CPU: 0 PID: 4504 Comm: syz-executor0 Not tainted 4.17.0-rc2+ Freescale#40 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 strlcpy include/linux/string.h:300 [inline] compat_mtw_from_user net/bridge/netfilter/ebtables.c:1957 [inline] ebt_size_mwt net/bridge/netfilter/ebtables.c:2059 [inline] size_entry_mwt net/bridge/netfilter/ebtables.c:2155 [inline] compat_copy_entries+0x96c/0x14a0 net/bridge/netfilter/ebtables.c:2194 compat_do_replace+0x483/0x900 net/bridge/netfilter/ebtables.c:2285 compat_do_ebt_set_ctl+0x2ac/0x324 net/bridge/netfilter/ebtables.c:2367 compat_nf_sockopt net/netfilter/nf_sockopt.c:144 [inline] compat_nf_setsockopt+0x9b/0x140 net/netfilter/nf_sockopt.c:156 compat_ip_setsockopt+0xff/0x140 net/ipv4/ip_sockglue.c:1279 inet_csk_compat_setsockopt+0x97/0x120 net/ipv4/inet_connection_sock.c:1041 compat_tcp_setsockopt+0x49/0x80 net/ipv4/tcp.c:2901 compat_sock_common_setsockopt+0xb4/0x150 net/core/sock.c:3050 __compat_sys_setsockopt+0x1ab/0x7c0 net/compat.c:403 __do_compat_sys_setsockopt net/compat.c:416 [inline] __se_compat_sys_setsockopt net/compat.c:413 [inline] __ia32_compat_sys_setsockopt+0xbd/0x150 net/compat.c:413 do_syscall_32_irqs_on arch/x86/entry/common.c:323 [inline] do_fast_syscall_32+0x345/0xf9b arch/x86/entry/common.c:394 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7fb3cb9 RSP: 002b:00000000fff0c26c EFLAGS: 00000282 ORIG_RAX: 000000000000016e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000080 RSI: 0000000020000300 RDI: 00000000000005f4 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:ffffea0006c2afc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x2fffc0000000000() raw: 02fffc0000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffffea0006c20101 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Fix the issue replacing the unsafe function with strscpy() and taking care of possible errors. Fixes: 81e675c ("netfilter: ebtables: add CONFIG_COMPAT support") Reported-and-tested-by: [email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 52f9675 ] syzkaller reports for buffer overflow for interface name when starting sync daemons [1] What we do is that we copy user structure into larger stack buffer but later we search NUL past the stack buffer. The same happens for sched_name when adding/editing virtual server. We are restricted by IP_VS_SCHEDNAME_MAXLEN and IP_VS_IFNAME_MAXLEN being used as size in include/uapi/linux/ip_vs.h, so they include the space for NUL. As using strlcpy is wrong for unsafe source, replace it with strscpy and add checks to return EINVAL if source string is not NUL-terminated. The incomplete strlcpy fix comes from 2.6.13. For the netlink interface reduce the len parameter for IPVS_DAEMON_ATTR_MCAST_IFN and IPVS_SVC_ATTR_SCHED_NAME, so that we get proper EINVAL. [1] kernel BUG at lib/string.c:1052! invalid opcode: 0000 [Freescale#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 373 Comm: syz-executor936 Not tainted 4.17.0-rc4+ Freescale#45 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051 RSP: 0018:ffff8801c976f800 EFLAGS: 00010282 RAX: 0000000000000022 RBX: 0000000000000040 RCX: 0000000000000000 RDX: 0000000000000022 RSI: ffffffff8160f6f1 RDI: ffffed00392edef6 RBP: ffff8801c976f800 R08: ffff8801cf4c62c0 R09: ffffed003b5e4fb0 R10: ffffed003b5e4fb0 R11: ffff8801daf27d87 R12: ffff8801c976fa20 R13: ffff8801c976fae4 R14: ffff8801c976fae0 R15: 000000000000048b FS: 00007fd99f75e700(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c0 CR3: 00000001d6843000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: strlen include/linux/string.h:270 [inline] strlcpy include/linux/string.h:293 [inline] do_ip_vs_set_ctl+0x31c/0x1d00 net/netfilter/ipvs/ip_vs_ctl.c:2388 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x7d/0xd0 net/netfilter/nf_sockopt.c:115 ip_setsockopt+0xd8/0xf0 net/ipv4/ip_sockglue.c:1253 udp_setsockopt+0x62/0xa0 net/ipv4/udp.c:2487 ipv6_setsockopt+0x149/0x170 net/ipv6/ipv6_sockglue.c:917 tcp_setsockopt+0x93/0xe0 net/ipv4/tcp.c:3057 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903 __do_sys_setsockopt net/socket.c:1914 [inline] __se_sys_setsockopt net/socket.c:1911 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x447369 RSP: 002b:00007fd99f75dda8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000006e39e4 RCX: 0000000000447369 RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000018 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000006e39e0 R13: 75a1ff93f0896195 R14: 6f745f3168746576 R15: 0000000000000001 Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 d2 8f 48 fa eb de 55 48 89 fe 48 c7 c7 60 65 64 88 48 89 e5 e8 91 dd f3 f9 <0f> 0b 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56 RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801c976f800 Reported-and-tested-by: [email protected] Fixes: e4ff675 ("ipvs: add sync_maxlen parameter for the sync daemon") Fixes: 4da62fc ("[IPVS]: Fix for overflows") Signed-off-by: Julian Anastasov <[email protected]> Acked-by: Simon Horman <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…of CPUs [ Upstream commit ab1068d ] When there are 16 or more logical CPUs, we request for `IWL_MAX_RX_HW_QUEUES` (16) IRQs only as we limit to that number of IRQs, but later on we compare the number of IRQs returned to nr_online_cpus+2 instead of max_irqs, the latter being what we actually asked for. This ends up setting num_rx_queues to 17 which causes lots of out-of-bounds array accesses later on. Compare to max_irqs instead, and also add an assertion in case num_rx_queues > IWM_MAX_RX_HW_QUEUES. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=199551 Fixes: 2e5d4a8 ("iwlwifi: pcie: Add new configuration to enable MSIX") Signed-off-by: Hao Wei Tee <[email protected]> Tested-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit f9c6442 ] memcmp() returns int, but eprom_try_esi() cast it to unsigned char. One can lose significant bits and get 0 from non-0 value returned by the memcmp(). Signed-off-by: Ivan Bornyakov <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 2415f3b ] Add support for Netgear Aircard 779S Signed-off-by: Josh Hill <[email protected]> Acked-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 32ffd6e ] Do not perform the rfkill cleanup routine when (asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since nothing is registered with the rfkill subsystem in that case. Doing so leads to the following kernel NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 PGD 1a3aa8067 PUD 1a3b3d067 PMD 0 Oops: 0002 [Freescale#1] PREEMPT SMP Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo Freescale#34 Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012 task: ffff8801a639ba00 task.stack: ffffc900014cc000 RIP: 0010:[<ffffffff816c7348>] [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP: 0018:ffffc900014cfce0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4 RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4 R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8 FS: 00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0 Stack: ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28 ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0 ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7 Call Trace: [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61 [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52 [<ffffffff816c73e7>] mutex_lock+0x17/0x30 [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi] [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi] [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi] [<ffffffff814a5128>] platform_drv_remove+0x28/0x40 [<ffffffff814a2901>] __device_release_driver+0xa1/0x160 [<ffffffff814a29e3>] device_release_driver+0x23/0x30 [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170 [<ffffffff8149e5a9>] device_del+0x139/0x270 [<ffffffff814a5028>] platform_device_del+0x28/0x90 [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30 [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi] [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi] [<ffffffff8110c692>] SyS_delete_module+0x192/0x270 [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0 [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00 RIP [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP <ffffc900014cfce0> CR2: 0000000000000000 ---[ end trace 8d484233fa7cb512 ]--- note: modprobe[3275] exited with preempt_count 2 https://bugzilla.kernel.org/show_bug.cgi?id=196467 Reported-by: [email protected] Signed-off-by: João Paulo Rechi Vita <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 26de0b7 ] With CONFIG_DMA_API_DEBUG=y, calling sonic_open() produces the message, "DMA-API: device driver failed to check map error". Add the missing dma_mapping_error() call. Cc: Thomas Bogendoerfer <[email protected]> Signed-off-by: Finn Thain <[email protected]> Acked-by: Thomas Bogendoerfer <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a95691b ] This patch adds support for the BCM5389 switch connected through MDIO. Signed-off-by: Damien Thébault <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

This reverts commit 186a651. This commit used an incorrect log message. Reported-by: Ben Hutchings <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 02db557 upstream. While rcvbuf is properly clamped by tcp_rmem[2], rcvwin is left to a potentially too big value. It has no serious effect, since : 1) tcp_grow_window() has very strict checks. 2) window_clamp can be mangled by user space to any value anyway. tcp_init_buffer_space() and companions use tcp_full_space(), we use tcp_win_from_space() to avoid reloading sk->sk_rcvbuf Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Soheil Hassas Yeganeh <[email protected]> Acked-by: Wei Wang <[email protected]> Acked-by: Neal Cardwell <[email protected]> Signed-off-by: David S. Miller <[email protected]> Cc: Benjamin Gilbert <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 8810f75 ] There is a scenario that can end up with rebuild process failing to return good content, i.e. suppose that all disks can be read without problems and if the content that was read out doesn't match its checksum, currently for raid6 btrfs at most retries twice, - the 1st retry is to rebuild with all other stripes, it'll eventually be a raid5 xor rebuild, - if the 1st fails, the 2nd retry will deliberately fail parity p so that it will do raid6 style rebuild, however, the chances are that another non-parity stripe content also has something corrupted, so that the above retries are not able to return correct content, and users will think of this as data loss. More seriouly, if the loss happens on some important internal btree roots, it could refuse to mount. This extends btrfs to do more retries and each retry fails only one stripe. Since raid6 can tolerate 2 disk failures, if there is one more failure besides the failure on which we're recovering, this can always work. The worst case is to retry as many times as the number of raid6 disks, but given the fact that such a scenario is really rare in practice, it's still acceptable. Signed-off-by: Liu Bo <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit ebc3dd6 ] It has been observed that writing 0xF2 to the power register while it reads as 0xF4 results in the register having the value 0xF0, i.e. clearing RESUME and setting SUSPENDM in one go does not work. It might also violate the USB spec to transition directly from resume to suspend, especially when not taking T_DRSMDN into account. But this is what happens when a remote wakeup occurs between SetPortFeature USB_PORT_FEAT_SUSPEND on the root hub and musb_bus_suspend being called. This commit returns -EBUSY when musb_bus_suspend is called while remote wakeup is signalled and thus avoids to reset the RESUME bit. Ignoring this error when musb_port_suspend is called from musb_hub_control is ok. Signed-off-by: Daniel Glöckner <[email protected]> Signed-off-by: Bin Liu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit eb55bbf ] There is a timing issue under active-standy mode, when bond_enslave() is called, bond->params.primary might not be initialized yet. Any time the primary slave string changes, bond->force_primary should be set to true to make sure the primary becomes the active slave. Signed-off-by: Xiangning Yu <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 0975764 ] IPVS setups with local client and remote tunnel server need to create exception for the local virtual IP. What we do is to change PMTU from 64KB (on "lo") to 1460 in the common case. Suggested-by: Martin KaFai Lau <[email protected]> Fixes: 45e4fd2 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Fixes: 7343ff3 ("ipv6: Don't create clones of host routes.") Signed-off-by: Julian Anastasov <[email protected]> Acked-by: David Ahern <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 8d49953 ] use nla_strlcpy() to avoid copying data beyond the length of TCA_DEF_DATA netlink attribute, in case it is less than SIMP_MAX_DATA and it does not end with '\0' character. v2: fix errors in the commit message, thanks Hangbin Liu Fixes: fa1b1cf ("net_cls_act: Make act_simple use of netlink policy.") Signed-off-by: Davide Caratti <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 4fd44a9 ] commit 079096f ("tcp/dccp: install syn_recv requests into ehash table") introduced an optimization for the handling of child sockets created for a new TCP connection. But this optimization passes any data associated with the last ACK of the connection handshake up the stack without verifying its checksum, because it calls tcp_child_process(), which in turn calls tcp_rcv_state_process() directly. These lower-level processing functions do not do any checksum verification. Insert a tcp_checksum_complete call in the TCP_NEW_SYN_RECEIVE path to fix this. Fixes: 079096f ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by: Frank van der Linden <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Tested-by: Balbir Singh <[email protected]> Reviewed-by: Balbir Singh <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit f429e7e upstream. Add new support for ALC257 codec. [ It's supposed to be almost equivalent with other ALC25x variants, just adding another type and id -- tiwai ] Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Tested-by: Pali Rohár <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 2ee3ee0 upstream. When ext4_ind_map_blocks() computes a length of a hole, it doesn't count with the fact that mapped offset may be somewhere in the middle of the completely empty subtree. In such case it will return too large length of the hole which then results in lseek(SEEK_DATA) to end up returning an incorrect offset beyond the end of the hole. Fix the problem by correctly taking offset within a subtree into account when computing a length of a hole. Fixes: facab4d CC: [email protected] Reported-by: Jeff Mahoney <[email protected]> Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit eee597a upstream. Currently in ext4_punch_hole we're going to skip the mtime update if there are no actual blocks to release. However we've actually modified the file by zeroing the partial block so the mtime should be updated. Moreover the sync and datasync handling is skipped as well, which is also wrong. Fix it. Signed-off-by: Lukas Czerner <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Reported-by: Joe Habermann <[email protected]> Cc: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…size commit 4f2f76f upstream. ext4_resize_fs() has an off-by-one bug when checking whether growing of a filesystem will not overflow inode count. As a result it allows a filesystem with 8192 inodes per group to grow to 64TB which overflows inode count to 0 and makes filesystem unusable. Fix it. Cc: [email protected] Fixes: 3f8a641 Reported-by: Jaco Kroon <[email protected]> Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Reviewed-by: Andreas Dilger <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 84d0c27 upstream. syzbot is hitting WARN() at kernfs_add_one() [1]. This is because kernfs_create_link() is confused by previous device_add() call which continued without setting dev->kobj.parent field when get_device_parent() failed by memory allocation fault injection. Fix this by propagating the error from class_dir_create_and_add() to the calllers of get_device_parent(). [1] https://syzkaller.appspot.com/bug?id=fae0fb607989ea744526d1c082a5b8de6529116f Signed-off-by: Tetsuo Handa <[email protected]> Reported-by: syzbot <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit b5c40d5 upstream. In btrfs_clone_files(), we must check the NODATASUM flag while the inodes are locked. Otherwise, it's possible that btrfs_ioctl_setflags() will change the flags after we check and we can end up with a party checksummed file. The race window is only a few instructions in size, between the if and the locks which is: 3834 if (S_ISDIR(src->i_mode) || S_ISDIR(inode->i_mode)) 3835 return -EISDIR; where the setflags must be run and toggle the NODATASUM flag (provided the file size is 0). The clone will block on the inode lock, segflags takes the inode lock, changes flags, releases log and clone continues. Not impossible but still needs a lot of bad luck to hit unintentionally. Fixes: 0e7b824 ("Btrfs: don't make a file partly checksummed through file clone") CC: [email protected] # 4.4+ Signed-off-by: Omar Sandoval <[email protected]> Reviewed-by: Nikolay Borisov <[email protected]> Reviewed-by: David Sterba <[email protected]> [ update changelog ] Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit fd4e994 upstream. If we have invalid flags set, when we error out we must drop our writer counter and free the buffer we allocated for the arguments. This bug is trivially reproduced with the following program on 4.7+: #include <fcntl.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/types.h> #include <linux/btrfs.h> #include <linux/btrfs_tree.h> int main(int argc, char **argv) { struct btrfs_ioctl_vol_args_v2 vol_args = { .flags = UINT64_MAX, }; int ret; int fd; if (argc != 2) { fprintf(stderr, "usage: %s PATH\n", argv[0]); return EXIT_FAILURE; } fd = open(argv[1], O_WRONLY); if (fd == -1) { perror("open"); return EXIT_FAILURE; } ret = ioctl(fd, BTRFS_IOC_RM_DEV_V2, &vol_args); if (ret == -1) perror("ioctl"); close(fd); return EXIT_SUCCESS; } When unmounting the filesystem, we'll hit the WARN_ON(mnt_get_writers(mnt)) in cleanup_mnt() and also may prevent the filesystem to be remounted read-only as the writer count will stay lifted. Fixes: 6b526ed ("btrfs: introduce device delete by devid") CC: [email protected] # 4.9+ Signed-off-by: Omar Sandoval <[email protected]> Reviewed-by: Su Yue <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit ac0b414 upstream. [BUG] Btrfs can create compressed extent without checksum (even though it shouldn't), and if we then try to replace device containing such extent, the result device will contain all the uncompressed data instead of the compressed one. Test case already submitted to fstests: https://patchwork.kernel.org/patch/10442353/ [CAUSE] When handling compressed extent without checksum, device replace will goe into copy_nocow_pages() function. In that function, btrfs will get all inodes referring to this data extents and then use find_or_create_page() to get pages direct from that inode. The problem here is, pages directly from inode are always uncompressed. And for compressed data extent, they mismatch with on-disk data. Thus this leads to corrupted compressed data extent written to replace device. [FIX] In this attempt, we could just remove the "optimization" branch, and let unified scrub_pages() to handle it. Although scrub_pages() won't bother reusing page cache, it will be a little slower, but it does the correct csum checking and won't cause such data corruption caused by "optimization". Note about the fix: this is the minimal fix that can be backported to older stable trees without conflicts. The whole callchain from copy_nocow_pages() can be deleted, and will be in followup patches. Fixes: ff023aa ("Btrfs: add code to scrub to copy read data to another disk") CC: [email protected] # 4.4+ Reported-by: James Harvey <[email protected]> Reviewed-by: James Harvey <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> [ remove code removal, add note why ] Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit a3aa60d upstream. When 'kzalloc()' fails in 'snd_hda_attach_pcm_stream()', a new pcm instance is created without setting its operators via 'snd_pcm_set_ops()'. Following operations on the new pcm instance can trigger kernel null pointer dereferences and cause kernel oops. This bug was found with my work on building a gray-box fault-injection tool for linux-kernel-module binaries. A kernel null pointer dereference was confirmed from line 'substream->ops->open()' in function 'snd_pcm_open_substream()' in file 'sound/core/pcm_native.c'. This patch fixes the bug by calling 'snd_device_free()' in the error handling path of 'kzalloc()', which removes the new pcm instance from the snd card before returns with an error code. Signed-off-by: Bo Chen <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 2861751 upstream. This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP EliteBook 830 G5 Signed-off-by: Dennis Wassenberg <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 7eef32c upstream. This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP ProBook 640 G4 Signed-off-by: Dennis Wassenberg <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit b2adf22 upstream. The server detects reconnect by the (non-zero) value in PreviousSessionId of SMB2/SMB3 SessionSetup request, but this behavior regressed due to commit 166cea4 ("SMB2: Separate RawNTLMSSP authentication from SMB2_sess_setup") CC: Stable <[email protected]> CC: Sachin Prabhu <[email protected]> Signed-off-by: Steve French <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 Freescale#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 Freescale#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 Freescale#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 Freescale#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 Freescale#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 Freescale#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 Freescale#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 Freescale#32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 Freescale#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 Freescale#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 Freescale#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 Freescale#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 Freescale#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 Freescale#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 Freescale#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 Freescale#32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 Freescale#33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d5027ca ] Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... Freescale#26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 Freescale#27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 Freescale#28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... Freescale#40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... Freescale#44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 Freescale#45 0x00007f8990968b85 in __getgrnam_r [...] Freescale#46 0x00007f89909d6b77 in grantpt [...] Freescale#47 0x00007f8990a9394e in __GI_openpty [...] Freescale#48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 Freescale#49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 Freescale#50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 Freescale#51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 Freescale#52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Acked-By: Anton Ivanov <[email protected]> Tested-By: Ritesh Raj Sarraf <[email protected]> Signed-off-by: Richard Weinberger <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…xtent [ Upstream commit 6416954 ] When cloning an inline extent there are a few cases, such as when we have an implicit hole at file offset 0, where we start a transaction while holding a read lock on a leaf. Starting the transaction results in a call to sb_start_intwrite(), which results in doing a read lock on a percpu semaphore. Lockdep doesn't like this and complains about it: [46.580704] ====================================================== [46.580752] WARNING: possible circular locking dependency detected [46.580799] 5.13.0-rc1 Freescale#28 Not tainted [46.580832] ------------------------------------------------------ [46.580877] cloner/3835 is trying to acquire lock: [46.580918] c00000001301d638 (sb_internal#2){.+.+}-{0:0}, at: clone_copy_inline_extent+0xe4/0x5a0 [46.581167] [46.581167] but task is already holding lock: [46.581217] c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0 [46.581293] [46.581293] which lock already depends on the new lock. [46.581293] [46.581351] [46.581351] the existing dependency chain (in reverse order) is: [46.581410] [46.581410] -> Freescale#1 (btrfs-tree-00){++++}-{3:3}: [46.581464] down_read_nested+0x68/0x200 [46.581536] __btrfs_tree_read_lock+0x70/0x1d0 [46.581577] btrfs_read_lock_root_node+0x88/0x200 [46.581623] btrfs_search_slot+0x298/0xb70 [46.581665] btrfs_set_inode_index+0xfc/0x260 [46.581708] btrfs_new_inode+0x26c/0x950 [46.581749] btrfs_create+0xf4/0x2b0 [46.581782] lookup_open.isra.57+0x55c/0x6a0 [46.581855] path_openat+0x418/0xd20 [46.581888] do_filp_open+0x9c/0x130 [46.581920] do_sys_openat2+0x2ec/0x430 [46.581961] do_sys_open+0x90/0xc0 [46.581993] system_call_exception+0x3d4/0x410 [46.582037] system_call_common+0xec/0x278 [46.582078] [46.582078] -> #0 (sb_internal#2){.+.+}-{0:0}: [46.582135] __lock_acquire+0x1e90/0x2c50 [46.582176] lock_acquire+0x2b4/0x5b0 [46.582263] start_transaction+0x3cc/0x950 [46.582308] clone_copy_inline_extent+0xe4/0x5a0 [46.582353] btrfs_clone+0x5fc/0x880 [46.582388] btrfs_clone_files+0xd8/0x1c0 [46.582434] btrfs_remap_file_range+0x3d8/0x590 [46.582481] do_clone_file_range+0x10c/0x270 [46.582558] vfs_clone_file_range+0x1b0/0x310 [46.582605] ioctl_file_clone+0x90/0x130 [46.582651] do_vfs_ioctl+0x874/0x1ac0 [46.582697] sys_ioctl+0x6c/0x120 [46.582733] system_call_exception+0x3d4/0x410 [46.582777] system_call_common+0xec/0x278 [46.582822] [46.582822] other info that might help us debug this: [46.582822] [46.582888] Possible unsafe locking scenario: [46.582888] [46.582942] CPU0 CPU1 [46.582984] ---- ---- [46.583028] lock(btrfs-tree-00); [46.583062] lock(sb_internal#2); [46.583119] lock(btrfs-tree-00); [46.583174] lock(sb_internal#2); [46.583212] [46.583212] *** DEADLOCK *** [46.583212] [46.583266] 6 locks held by cloner/3835: [46.583299] #0: c00000001301d448 (sb_writers#12){.+.+}-{0:0}, at: ioctl_file_clone+0x90/0x130 [46.583382] Freescale#1: c00000000f6d3768 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}, at: lock_two_nondirectories+0x58/0xc0 [46.583477] Freescale#2: c00000000f6d72a8 (&sb->s_type->i_mutex_key#15/4){+.+.}-{3:3}, at: lock_two_nondirectories+0x9c/0xc0 [46.583574] Freescale#3: c00000000f6d7138 (&ei->i_mmap_lock){+.+.}-{3:3}, at: btrfs_remap_file_range+0xd0/0x590 [46.583657] Freescale#4: c00000000f6d35f8 (&ei->i_mmap_lock/1){+.+.}-{3:3}, at: btrfs_remap_file_range+0xe0/0x590 [46.583743] Freescale#5: c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0 [46.583828] [46.583828] stack backtrace: [46.583872] CPU: 1 PID: 3835 Comm: cloner Not tainted 5.13.0-rc1 Freescale#28 [46.583931] Call Trace: [46.583955] [c0000000167c7200] [c000000000c1ee78] dump_stack+0xec/0x144 (unreliable) [46.584052] [c0000000167c7240] [c000000000274058] print_circular_bug.isra.32+0x3a8/0x400 [46.584123] [c0000000167c72e0] [c0000000002741f4] check_noncircular+0x144/0x190 [46.584191] [c0000000167c73b0] [c000000000278fc0] __lock_acquire+0x1e90/0x2c50 [46.584259] [c0000000167c74f0] [c00000000027aa94] lock_acquire+0x2b4/0x5b0 [46.584317] [c0000000167c75e0] [c000000000a0d6cc] start_transaction+0x3cc/0x950 [46.584388] [c0000000167c7690] [c000000000af47a4] clone_copy_inline_extent+0xe4/0x5a0 [46.584457] [c0000000167c77c0] [c000000000af525c] btrfs_clone+0x5fc/0x880 [46.584514] [c0000000167c7990] [c000000000af5698] btrfs_clone_files+0xd8/0x1c0 [46.584583] [c0000000167c7a00] [c000000000af5b58] btrfs_remap_file_range+0x3d8/0x590 [46.584652] [c0000000167c7ae0] [c0000000005d81dc] do_clone_file_range+0x10c/0x270 [46.584722] [c0000000167c7b40] [c0000000005d84f0] vfs_clone_file_range+0x1b0/0x310 [46.584793] [c0000000167c7bb0] [c00000000058bf80] ioctl_file_clone+0x90/0x130 [46.584861] [c0000000167c7c10] [c00000000058c894] do_vfs_ioctl+0x874/0x1ac0 [46.584922] [c0000000167c7d10] [c00000000058db4c] sys_ioctl+0x6c/0x120 [46.584978] [c0000000167c7d60] [c0000000000364a4] system_call_exception+0x3d4/0x410 [46.585046] [c0000000167c7e10] [c00000000000d45c] system_call_common+0xec/0x278 [46.585114] --- interrupt: c00 at 0x7ffff7e22990 [46.585160] NIP: 00007ffff7e22990 LR: 00000001000010ec CTR: 0000000000000000 [46.585224] REGS: c0000000167c7e80 TRAP: 0c00 Not tainted (5.13.0-rc1) [46.585280] MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 28000244 XER: 00000000 [46.585374] IRQMASK: 0 [46.585374] GPR00: 0000000000000036 00007fffffffdec0 00007ffff7f17100 0000000000000004 [46.585374] GPR04: 000000008020940d 00007fffffffdf40 0000000000000000 0000000000000000 [46.585374] GPR08: 0000000000000004 0000000000000000 0000000000000000 0000000000000000 [46.585374] GPR12: 0000000000000000 00007ffff7ffa940 0000000000000000 0000000000000000 [46.585374] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [46.585374] GPR20: 0000000000000000 000000009123683e 00007fffffffdf40 0000000000000000 [46.585374] GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000004 [46.585374] GPR28: 0000000100030260 0000000100030280 0000000000000003 000000000000005f [46.585919] NIP [00007ffff7e22990] 0x7ffff7e22990 [46.585964] LR [00000001000010ec] 0x1000010ec [46.586010] --- interrupt: c00 This should be a false positive, as both locks are acquired in read mode. Nevertheless, we don't need to hold a leaf locked when we start the transaction, so just release the leaf (path) before starting it. Reported-by: Ritesh Harjani <[email protected]> Link: https://lore.kernel.org/linux-btrfs/20210513214404.xks77p566fglzgum@riteshh-domain/ Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b5befe8 ] An srcu_struct structure that is initialized before rcu_init_geometry() will have its srcu_node hierarchy based on CONFIG_NR_CPUS. Once rcu_init_geometry() is called, this hierarchy is compressed as needed for the actual maximum number of CPUs for this system. Later on, that srcu_struct structure is confused, sometimes referring to its initial CONFIG_NR_CPUS-based hierarchy, and sometimes instead to the new num_possible_cpus() hierarchy. For example, each of its ->mynode fields continues to reference the original leaf rcu_node structures, some of which might no longer exist. On the other hand, srcu_for_each_node_breadth_first() traverses to the new node hierarchy. There are at least two bad possible outcomes to this: 1) a) A callback enqueued early on an srcu_data structure (call it *sdp) is recorded pending on sdp->mynode->srcu_data_have_cbs in srcu_funnel_gp_start() with sdp->mynode pointing to a deep leaf (say 3 levels). b) The grace period ends after rcu_init_geometry() shrinks the nodes level to a single one. srcu_gp_end() walks through the new srcu_node hierarchy without ever reaching the old leaves so the callback is never executed. This is easily reproduced on an 8 CPUs machine with CONFIG_NR_CPUS >= 32 and "rcupdate.rcu_self_test=1". The srcu_barrier() after early tests verification never completes and the boot hangs: [ 5413.141029] INFO: task swapper/0:1 blocked for more than 4915 seconds. [ 5413.147564] Not tainted 5.12.0-rc4+ Freescale#28 [ 5413.151927] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 5413.159753] task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00004000 [ 5413.168099] Call Trace: [ 5413.170555] __schedule+0x36c/0x930 [ 5413.174057] ? wait_for_completion+0x88/0x110 [ 5413.178423] schedule+0x46/0xf0 [ 5413.181575] schedule_timeout+0x284/0x380 [ 5413.185591] ? wait_for_completion+0x88/0x110 [ 5413.189957] ? mark_held_locks+0x61/0x80 [ 5413.193882] ? mark_held_locks+0x61/0x80 [ 5413.197809] ? _raw_spin_unlock_irq+0x24/0x50 [ 5413.202173] ? wait_for_completion+0x88/0x110 [ 5413.206535] wait_for_completion+0xb4/0x110 [ 5413.210724] ? srcu_torture_stats_print+0x110/0x110 [ 5413.215610] srcu_barrier+0x187/0x200 [ 5413.219277] ? rcu_tasks_verify_self_tests+0x50/0x50 [ 5413.224244] ? rdinit_setup+0x2b/0x2b [ 5413.227907] rcu_verify_early_boot_tests+0x2d/0x40 [ 5413.232700] do_one_initcall+0x63/0x310 [ 5413.236541] ? rdinit_setup+0x2b/0x2b [ 5413.240207] ? rcu_read_lock_sched_held+0x52/0x80 [ 5413.244912] kernel_init_freeable+0x253/0x28f [ 5413.249273] ? rest_init+0x250/0x250 [ 5413.252846] kernel_init+0xa/0x110 [ 5413.256257] ret_from_fork+0x22/0x30 2) An srcu_struct structure that is initialized before rcu_init_geometry() and used afterward will always have stale rdp->mynode references, resulting in callbacks to be missed in srcu_gp_end(), just like in the previous scenario. This commit therefore causes init_srcu_struct_nodes to initialize the geometry, if needed. This ensures that the srcu_node hierarchy is properly built and distributed from the get-go. Suggested-by: Paul E. McKenney <[email protected]> Signed-off-by: Frederic Weisbecker <[email protected]> Cc: Boqun Feng <[email protected]> Cc: Lai Jiangshan <[email protected]> Cc: Neeraj Upadhyay <[email protected]> Cc: Josh Triplett <[email protected]> Cc: Joel Fernandes <[email protected]> Cc: Uladzislau Rezki <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d412137 ] The perf_buffer fails on system with offline cpus: # test_progs -t perf_buffer test_perf_buffer:PASS:nr_cpus 0 nsec test_perf_buffer:PASS:nr_on_cpus 0 nsec test_perf_buffer:PASS:skel_load 0 nsec test_perf_buffer:PASS:attach_kprobe 0 nsec test_perf_buffer:PASS:perf_buf__new 0 nsec test_perf_buffer:PASS:epoll_fd 0 nsec skipping offline CPU Freescale#24 skipping offline CPU Freescale#25 skipping offline CPU Freescale#26 skipping offline CPU Freescale#27 skipping offline CPU Freescale#28 skipping offline CPU Freescale#29 skipping offline CPU Freescale#30 skipping offline CPU Freescale#31 test_perf_buffer:PASS:perf_buffer__poll 0 nsec test_perf_buffer:PASS:seen_cpu_cnt 0 nsec test_perf_buffer:FAIL:buf_cnt got 24, expected 32 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Changing the test to check online cpus instead of possible. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d5027ca ] Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... Freescale#26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 Freescale#27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 Freescale#28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... Freescale#40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... Freescale#44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 Freescale#45 0x00007f8990968b85 in __getgrnam_r [...] Freescale#46 0x00007f89909d6b77 in grantpt [...] Freescale#47 0x00007f8990a9394e in __GI_openpty [...] Freescale#48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 Freescale#49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 Freescale#50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 Freescale#51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 Freescale#52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Acked-By: Anton Ivanov <[email protected]> Tested-By: Ritesh Raj Sarraf <[email protected]> Signed-off-by: Richard Weinberger <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

This fixes the following trace which is caused by hci_rx_work starting up *after* the final channel reference has been put() during sock_close() but *before* the references to the channel have been destroyed, so instead the code now rely on kref_get_unless_zero/l2cap_chan_hold_unless_zero to prevent referencing a channel that is about to be destroyed. refcount_t: increment on 0; use-after-free. BUG: KASAN: use-after-free in refcount_dec_and_test+0x20/0xd0 Read of size 4 at addr ffffffc114f5bf18 by task kworker/u17:14/705 CPU: 4 PID: 705 Comm: kworker/u17:14 Tainted: G S W 4.14.234-00003-g1fb6d0bd49a4-dirty #28 Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150 Google Inc. MSM sm8150 Flame DVT (DT) Workqueue: hci0 hci_rx_work Call trace: dump_backtrace+0x0/0x378 show_stack+0x20/0x2c dump_stack+0x124/0x148 print_address_description+0x80/0x2e8 __kasan_report+0x168/0x188 kasan_report+0x10/0x18 __asan_load4+0x84/0x8c refcount_dec_and_test+0x20/0xd0 l2cap_chan_put+0x48/0x12c l2cap_recv_frame+0x4770/0x6550 l2cap_recv_acldata+0x44c/0x7a4 hci_acldata_packet+0x100/0x188 hci_rx_work+0x178/0x23c process_one_work+0x35c/0x95c worker_thread+0x4cc/0x960 kthread+0x1a8/0x1c4 ret_from_fork+0x10/0x18 Cc: [email protected] Reported-by: Lee Jones <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Tested-by: Lee Jones <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>

[ Upstream commit 19fc5bb ] kasan detects access beyond the end of the xibm->bitmap allocation: BUG: KASAN: slab-out-of-bounds in _find_first_zero_bit+0x40/0x140 Read of size 8 at addr c00000001d1d0118 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00001-g90df023b36dd Freescale#28 Call Trace: [c00000001d98f770] [c0000000012baab8] dump_stack_lvl+0xac/0x108 (unreliable) [c00000001d98f7b0] [c00000000068faac] print_report+0x37c/0x710 [c00000001d98f880] [c0000000006902c0] kasan_report+0x110/0x354 [c00000001d98f950] [c000000000692324] __asan_load8+0xa4/0xe0 [c00000001d98f970] [c0000000011c6ed0] _find_first_zero_bit+0x40/0x140 [c00000001d98f9b0] [c0000000000dbfbc] xive_spapr_get_ipi+0xcc/0x260 [c00000001d98fa70] [c0000000000d6d28] xive_setup_cpu_ipi+0x1e8/0x450 [c00000001d98fb30] [c000000004032a20] pSeries_smp_probe+0x5c/0x118 [c00000001d98fb60] [c000000004018b44] smp_prepare_cpus+0x944/0x9ac [c00000001d98fc90] [c000000004009f9c] kernel_init_freeable+0x2d4/0x640 [c00000001d98fd90] [c0000000000131e8] kernel_init+0x28/0x1d0 [c00000001d98fe10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64 Allocated by task 0: kasan_save_stack+0x34/0x70 __kasan_kmalloc+0xb4/0xf0 __kmalloc+0x268/0x540 xive_spapr_init+0x4d0/0x77c pseries_init_irq+0x40/0x27c init_IRQ+0x44/0x84 start_kernel+0x2a4/0x538 start_here_common+0x1c/0x20 The buggy address belongs to the object at c00000001d1d0118 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes inside of 8-byte region [c00000001d1d0118, c00000001d1d0120) The buggy address belongs to the physical page: page:c00c000000074740 refcount:1 mapcount:0 mapping:0000000000000000 index:0xc00000001d1d0558 pfn:0x1d1d flags: 0x7ffff000000200(slab|node=0|zone=0|lastcpupid=0x7ffff) raw: 007ffff000000200 c00000001d0003c8 c00000001d0003c8 c00000001d010480 raw: c00000001d1d0558 0000000001e1000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: c00000001d1d0000: fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0080: fc fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >c00000001d1d0100: fc fc fc 02 fc fc fc fc fc fc fc fc fc fc fc fc ^ c00000001d1d0180: fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0200: fc fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc This happens because the allocation uses the wrong unit (bits) when it should pass (BITS_TO_LONGS(count) * sizeof(long)) or equivalent. With small numbers of bits, the allocated object can be smaller than sizeof(long), which results in invalid accesses. Use bitmap_zalloc() to allocate and initialize the irq bitmap, paired with bitmap_free() for consistency. Signed-off-by: Nathan Lynch <[email protected]> Reviewed-by: Cédric Le Goater <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>

commit d0be834 upstream. This fixes the following trace which is caused by hci_rx_work starting up *after* the final channel reference has been put() during sock_close() but *before* the references to the channel have been destroyed, so instead the code now rely on kref_get_unless_zero/l2cap_chan_hold_unless_zero to prevent referencing a channel that is about to be destroyed. refcount_t: increment on 0; use-after-free. BUG: KASAN: use-after-free in refcount_dec_and_test+0x20/0xd0 Read of size 4 at addr ffffffc114f5bf18 by task kworker/u17:14/705 CPU: 4 PID: 705 Comm: kworker/u17:14 Tainted: G S W 4.14.234-00003-g1fb6d0bd49a4-dirty Freescale#28 Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150 Google Inc. MSM sm8150 Flame DVT (DT) Workqueue: hci0 hci_rx_work Call trace: dump_backtrace+0x0/0x378 show_stack+0x20/0x2c dump_stack+0x124/0x148 print_address_description+0x80/0x2e8 __kasan_report+0x168/0x188 kasan_report+0x10/0x18 __asan_load4+0x84/0x8c refcount_dec_and_test+0x20/0xd0 l2cap_chan_put+0x48/0x12c l2cap_recv_frame+0x4770/0x6550 l2cap_recv_acldata+0x44c/0x7a4 hci_acldata_packet+0x100/0x188 hci_rx_work+0x178/0x23c process_one_work+0x35c/0x95c worker_thread+0x4cc/0x960 kthread+0x1a8/0x1c4 ret_from_fork+0x10/0x18 Cc: [email protected] Reported-by: Lee Jones <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Tested-by: Lee Jones <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 9c80e79 upstream. The assumption in __disable_kprobe() is wrong, and it could try to disarm an already disarmed kprobe and fire the WARN_ONCE() below. [0] We can easily reproduce this issue. 1. Write 0 to /sys/kernel/debug/kprobes/enabled. # echo 0 > /sys/kernel/debug/kprobes/enabled 2. Run execsnoop. At this time, one kprobe is disabled. # /usr/share/bcc/tools/execsnoop & [1] 2460 PCOMM PID PPID RET ARGS # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes kprobes_all_disarmed to false but does not arm the disabled kprobe. # echo 1 > /sys/kernel/debug/kprobes/enabled # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace(). # fg /usr/share/bcc/tools/execsnoop ^C Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses some cleanups and leaves the aggregated kprobe in the hash table. Then, __unregister_trace_kprobe() initialises tk->rp.kp.list and creates an infinite loop like this. aggregated kprobe.list -> kprobe.list -. ^ | '.__.' In this situation, these commands fall into the infinite loop and result in RCU stall or soft lockup. cat /sys/kernel/debug/kprobes/list : show_kprobe_addr() enters into the infinite loop with RCU. /usr/share/bcc/tools/execsnoop : warn_kprobe_rereg() holds kprobe_mutex, and __get_valid_kprobe() is stuck in the loop. To avoid the issue, make sure we don't call disarm_kprobe() for disabled kprobes. [0] Failed to disarm kprobe-ftrace at __x64_sys_execve+0x0/0x40 (error -2) WARNING: CPU: 6 PID: 2460 at kernel/kprobes.c:1130 __disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Modules linked in: ena CPU: 6 PID: 2460 Comm: execsnoop Not tainted 5.19.0+ Freescale#28 Hardware name: Amazon EC2 c5.2xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:__disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Code: 24 8b 02 eb c1 80 3d c4 83 f2 01 00 75 d4 48 8b 75 00 89 c2 48 c7 c7 90 fa 0f 92 89 04 24 c6 05 ab 83 01 e8 e4 94 f0 ff <0f> 0b 8b 04 24 eb b1 89 c6 48 c7 c7 60 fa 0f 92 89 04 24 e8 cc 94 RSP: 0018:ffff9e6ec154bd98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff930f7b00 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff921461c5 RDI: 00000000ffffffff RBP: ffff89c504286da8 R08: 0000000000000000 R09: c0000000fffeffff R10: 0000000000000000 R11: ffff9e6ec154bc28 R12: ffff89c502394e40 R13: ffff89c502394c00 R14: ffff9e6ec154bc00 R15: 0000000000000000 FS: 00007fe800398740(0000) GS:ffff89c812d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c00057f010 CR3: 0000000103b54006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> __disable_kprobe (kernel/kprobes.c:1716) disable_kprobe (kernel/kprobes.c:2392) __disable_trace_kprobe (kernel/trace/trace_kprobe.c:340) disable_trace_kprobe (kernel/trace/trace_kprobe.c:429) perf_trace_event_unreg.isra.2 (./include/linux/tracepoint.h:93 kernel/trace/trace_event_perf.c:168) perf_kprobe_destroy (kernel/trace/trace_event_perf.c:295) _free_event (kernel/events/core.c:4971) perf_event_release_kernel (kernel/events/core.c:5176) perf_release (kernel/events/core.c:5186) __fput (fs/file_table.c:321) task_work_run (./include/linux/sched.h:2056 (discriminator 1) kernel/task_work.c:179 (discriminator 1)) exit_to_user_mode_prepare (./include/linux/resume_user_mode.h:49 kernel/entry/common.c:169 kernel/entry/common.c:201) syscall_exit_to_user_mode (./arch/x86/include/asm/jump_label.h:55 ./arch/x86/include/asm/nospec-branch.h:384 ./arch/x86/include/asm/entry-common.h:94 kernel/entry/common.c:133 kernel/entry/common.c:296) do_syscall_64 (arch/x86/entry/common.c:87) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7fe7ff210654 Code: 15 79 89 20 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb be 0f 1f 00 8b 05 9a cd 20 00 48 63 ff 85 c0 75 11 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3a f3 c3 48 83 ec 18 48 89 7c 24 08 e8 34 fc RSP: 002b:00007ffdbd1d3538 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000008 RCX: 00007fe7ff210654 RDX: 0000000000000000 RSI: 0000000000002401 RDI: 0000000000000008 RBP: 0000000000000000 R08: 94ae31d6fda838a4 R0900007fe8001c9d30 R10: 00007ffdbd1d34b0 R11: 0000000000000246 R12: 00007ffdbd1d3600 R13: 0000000000000000 R14: fffffffffffffffc R15: 00007ffdbd1d3560 </TASK> Link: https://lkml.kernel.org/r/[email protected] Fixes: 69d54b9 ("kprobes: makes kprobes/enabled works correctly for optimized kprobes.") Signed-off-by: Kuniyuki Iwashima <[email protected]> Reported-by: Ayushman Dutta <[email protected]> Cc: "Naveen N. Rao" <[email protected]> Cc: Anil S Keshavamurthy <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Wang Nan <[email protected]> Cc: Kuniyuki Iwashima <[email protected]> Cc: Kuniyuki Iwashima <[email protected]> Cc: Ayushman Dutta <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 16bbdfe ] Syzkaller produced the below call trace: BUG: KASAN: null-ptr-deref in io_msg_ring+0x3cb/0x9f0 Write of size 8 at addr 0000000000000070 by task repro/16399 CPU: 0 PID: 16399 Comm: repro Not tainted 6.1.0-rc1 Freescale#28 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ? io_msg_ring+0x3cb/0x9f0 kasan_report+0xbc/0xf0 ? io_msg_ring+0x3cb/0x9f0 kasan_check_range+0x140/0x190 io_msg_ring+0x3cb/0x9f0 ? io_msg_ring_prep+0x300/0x300 io_issue_sqe+0x698/0xca0 io_submit_sqes+0x92f/0x1c30 __do_sys_io_uring_enter+0xae4/0x24b0 .... RIP: 0033:0x7f2eaf8f8289 RSP: 002b:00007fff40939718 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2eaf8f8289 RDX: 0000000000000000 RSI: 0000000000006f71 RDI: 0000000000000004 RBP: 00007fff409397a0 R08: 0000000000000000 R09: 0000000000000039 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004006d0 R13: 00007fff40939880 R14: 0000000000000000 R15: 0000000000000000 </TASK> Kernel panic - not syncing: panic_on_warn set ... We don't have a NULL check on file_ptr in io_msg_send_fd() function, so when file_ptr is NUL src_file is also NULL and get_file() dereferences a NULL pointer and leads to above crash. Add a NULL check to fix this issue. Fixes: e6130eb ("io_uring: add support for passing fixed file descriptors") Reported-by: syzkaller <[email protected]> Signed-off-by: Harshit Mogalapalli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

The imx_sec_dsim_probe may be deferred (e.g. when uising ti,sn65dsi84). After a deferral, of_reset_control_array_get will fail because of the call in the previous imx_sec_dsim_probe. To fix this, unwind by doing the following when component_add is deferred: - Release reset controls by calling sec_dsim_of_put_resets - Disable PM by calling pm_runtime_disable. Tested using ti,sn65dsi84 on the following Variscite configurations: - VAR-SOM-MX8M-NANO v1.1 + Symphony v1.6 - DART-MX8M-MINI v1.1 + DT8MCustomBoard v3.0 Fixes the following: [ 1.929043] imx_sec_dsim_drv 32e10000.dsi_controller: version number is 0x1060200 [ 1.936603] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/bus@32c00000/dsi_controller@32e10000 to encoder DSI-34: -517 [ 1.948815] imx_sec_dsim_drv 32e10000.dsi_controller: Failed to attach bridge: 32e10000.dsi_controller [ 1.958137] imx_sec_dsim_drv 32e10000.dsi_controller: failed to bind sec dsim bridge: -517 [ 1.972737] pps pps0: new PPS source ptp0 [ 2.083716] vddio: Bringing 1500000uV into 1800000-1800000uV [ 2.090807] fec 30be0000.ethernet eth0: registered PHC device 0 [ 2.103846] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 8 mkt segment 0 supported-hw 0x100 0x1 [ 2.113964] Hot alarm is canceled. GPU3D clock will return to 64/64 [ 2.123475] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO [ 2.128789] mxc-mipi-csi2-sam 32e30000.csi: supply mipi-phy not found, using dummy regulator [ 2.138023] mxc-mipi-csi2-sam 32e30000.csi: lanes: 2, hs_settle: 13, clk_settle: 2, wclk: 1, freq: 333000000 [ 2.150900] ------------[ cut here ]------------ [ 2.155536] WARNING: CPU: 2 PID: 8 at drivers/reset/core.c:765 __reset_control_get_internal+0x68/0x160 [ 2.164859] Modules linked in: [ 2.165181] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA [ 2.167919] CPU: 2 PID: 8 Comm: kworker/u8:0 Not tainted 5.15.60-05940-gd9b705ee8975 Freescale#28 [ 2.167926] Hardware name: Variscite VAR-SOM-MX8M-NANO on Symphony-Board (DT) [ 2.167932] Workqueue: events_unbound deferred_probe_work_func [ 2.167944] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.202981] pc : __reset_control_get_internal+0x68/0x160 [ 2.208295] lr : __of_reset_control_get+0x16c/0x1d0 [ 2.213176] sp : ffff800009df3990 [ 2.216488] x29: ffff800009df3990 x28: ffff000017dd1e80 x27: ffff00000516fb38 [ 2.223629] x26: 0000000000000001 x25: 0000000000000000 x24: 0000000000000001 [ 2.230767] x23: 0000000000000000 x22: ffff000004982880 x21: 0000000000000001 [ 2.237907] x20: ffff0000049828a0 x19: ffff00000545bd80 x18: ffffffffffffffff [ 2.245046] x17: 7465735f6b6c6320 x16: 2c3331203a656c74 x15: ffff00000516f78a [ 2.252186] x14: ffffffffffffffff x13: 0000000000000018 x12: 0101010101010101 [ 2.259326] x11: 0000000000000030 x10: 0101010101010101 x9 : 0000000000000000 [ 2.266465] x8 : 7f7f7f7f7f7f7f7f x7 : 70ff726b6b64622c x6 : 0000000000008072 [ 2.273604] x5 : fffffbfffdc01818 x4 : 0000000000000000 x3 : 0000000000000001 [ 2.280743] x2 : 0000000000000001 x1 : 0000000000000001 x0 : 0000000000000000 [ 2.287884] Call trace: [ 2.290329] __reset_control_get_internal+0x68/0x160 [ 2.295296] __of_reset_control_get+0x16c/0x1d0 [ 2.299828] of_reset_control_array_get+0xac/0x230 [ 2.304622] imx_sec_dsim_probe+0x21c/0x30c [ 2.308809] platform_probe+0x68/0xe0 [ 2.312475] really_probe.part.0+0x9c/0x30c [ 2.316660] __driver_probe_device+0x98/0x144 [ 2.321018] driver_probe_device+0xc8/0x15c [ 2.325202] __device_attach_driver+0xb4/0x120 [ 2.329645] bus_for_each_drv+0x78/0xd0 [ 2.333483] __device_attach+0xa8/0x1c0 [ 2.337320] device_initial_probe+0x14/0x20 [ 2.341505] bus_probe_device+0x9c/0xa4 [ 2.345342] deferred_probe_work_func+0x80/0xc0 [ 2.349874] process_one_work+0x1d0/0x354 [ 2.353890] worker_thread+0x2c0/0x470 [ 2.357641] kthread+0x150/0x160 [ 2.360871] ret_from_fork+0x10/0x20 [ 2.364451] ---[ end trace 60172b2d7c2580e5 ]--- [ 2.369212] ------------[ cut here ]------------ [ 2.373828] WARNING: CPU: 2 PID: 8 at drivers/reset/core.c:765 __reset_control_get_internal+0x68/0x160 [ 2.383141] Modules linked in: [ 2.386198] CPU: 2 PID: 8 Comm: kworker/u8:0 Tainted: G W 5.15.60-05940-gd9b705ee8975 Freescale#28 [ 2.395677] Hardware name: Variscite VAR-SOM-MX8M-NANO on Symphony-Board (DT) [ 2.402811] Workqueue: events_unbound deferred_probe_work_func [ 2.408648] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.415610] pc : __reset_control_get_internal+0x68/0x160 [ 2.420924] lr : __of_reset_control_get+0x16c/0x1d0 [ 2.425803] sp : ffff800009df3990 [ 2.429114] x29: ffff800009df3990 x28: ffff000017dd20a8 x27: ffff00000516fb38 [ 2.436255] x26: 0000000000000001 x25: 0000000000000000 x24: 0000000000000001 [ 2.443393] x23: 0000000000000000 x22: ffff000004982f80 x21: 0000000000000001 [ 2.450533] x20: ffff000004982fa0 x19: ffff00000545bf00 x18: ffffffffffffffff [ 2.457672] x17: 7465735f6b6c6320 x16: 2c3331203a656c74 x15: ffff00000516f78a [ 2.464812] x14: ffffffffffffffff x13: 0000000000000018 x12: 0101010101010101 [ 2.471952] x11: 0000000000000030 x10: 0101010101010101 x9 : 0000000000000000 [ 2.479091] x8 : 7f7f7f7f7f7f7f7f x7 : 70ff726b6b64622c x6 : 0000000000008072 [ 2.486230] x5 : fffffbfffdc01868 x4 : 0000000000000000 x3 : 0000000000000001 [ 2.493369] x2 : 0000000000000001 x1 : 0000000000000001 x0 : 0000000000000000 [ 2.500509] Call trace: [ 2.502954] __reset_control_get_internal+0x68/0x160 [ 2.507920] __of_reset_control_get+0x16c/0x1d0 [ 2.512452] of_reset_control_array_get+0xac/0x230 [ 2.517245] imx_sec_dsim_probe+0x21c/0x30c [ 2.521433] platform_probe+0x68/0xe0 [ 2.525097] really_probe.part.0+0x9c/0x30c [ 2.529281] __driver_probe_device+0x98/0x144 [ 2.533640] driver_probe_device+0xc8/0x15c [ 2.537824] __device_attach_driver+0xb4/0x120 [ 2.542269] bus_for_each_drv+0x78/0xd0 [ 2.546107] __device_attach+0xa8/0x1c0 [ 2.549945] device_initial_probe+0x14/0x20 [ 2.554129] bus_probe_device+0x9c/0xa4 [ 2.557965] deferred_probe_work_func+0x80/0xc0 [ 2.562497] process_one_work+0x1d0/0x354 [ 2.566509] worker_thread+0x2c0/0x470 [ 2.570260] kthread+0x150/0x160 [ 2.573490] ret_from_fork+0x10/0x20 [ 2.577067] ---[ end trace 60172b2d7c2580e6 ]--- [ 2.581883] ------------[ cut here ]------------ [ 2.586499] WARNING: CPU: 2 PID: 8 at drivers/reset/core.c:765 __reset_control_get_internal+0x68/0x160 [ 2.595808] Modules linked in: [ 2.598862] CPU: 2 PID: 8 Comm: kworker/u8:0 Tainted: G W 5.15.60-05940-gd9b705ee8975 Freescale#28 [ 2.608341] Hardware name: Variscite VAR-SOM-MX8M-NANO on Symphony-Board (DT) [ 2.615474] Workqueue: events_unbound deferred_probe_work_func [ 2.621309] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.628271] pc : __reset_control_get_internal+0x68/0x160 [ 2.633584] lr : __of_reset_control_get+0x16c/0x1d0 [ 2.638464] sp : ffff800009df3990 [ 2.641775] x29: ffff800009df3990 x28: ffff000017dd22d0 x27: ffff00000516fb38 [ 2.648915] x26: 0000000000000001 x25: 0000000000000000 x24: 0000000000000001 [ 2.656053] x23: 0000000000000000 x22: ffff000004983680 x21: 0000000000000001 [ 2.663192] x20: ffff0000049836a0 x19: ffff000004909500 x18: ffffffffffffffff [ 2.670331] x17: 7465735f6b6c6320 x16: 2c3331203a656c74 x15: ffff00000516f78a [ 2.677469] x14: ffffffffffffffff x13: 0000000000000018 x12: 0101010101010101 [ 2.684609] x11: 0000000000000030 x10: 0101010101010101 x9 : 0000000000000000 [ 2.691747] x8 : 7f7f7f7f7f7f7f7f x7 : 70ff726b6b64622c x6 : 0000000000008072 [ 2.698886] x5 : fffffbfffdc018b8 x4 : 0000000000000000 x3 : 0000000000000001 [ 2.706024] x2 : 0000000000000001 x1 : 0000000000000001 x0 : 0000000000000000 [ 2.713162] Call trace: [ 2.715606] __reset_control_get_internal+0x68/0x160 [ 2.720572] __of_reset_control_get+0x16c/0x1d0 [ 2.725103] of_reset_control_array_get+0xac/0x230 [ 2.729895] imx_sec_dsim_probe+0x21c/0x30c [ 2.734080] platform_probe+0x68/0xe0 [ 2.737744] really_probe.part.0+0x9c/0x30c [ 2.741928] __driver_probe_device+0x98/0x144 [ 2.746285] driver_probe_device+0xc8/0x15c [ 2.750469] __device_attach_driver+0xb4/0x120 [ 2.754914] bus_for_each_drv+0x78/0xd0 [ 2.758750] __device_attach+0xa8/0x1c0 [ 2.762586] device_initial_probe+0x14/0x20 [ 2.766771] bus_probe_device+0x9c/0xa4 [ 2.770606] deferred_probe_work_func+0x80/0xc0 [ 2.775137] process_one_work+0x1d0/0x354 [ 2.779149] worker_thread+0x2c0/0x470 [ 2.782899] kthread+0x150/0x160 [ 2.786127] ret_from_fork+0x10/0x20 [ 2.789703] ---[ end trace 60172b2d7c2580e7 ]--- [ 2.794359] imx_sec_dsim_drv 32e10000.dsi_controller: no invalid reset control exists [ 2.802553] imx_sec_dsim_drv: probe of 32e10000.dsi_controller failed with error -22 Signed-off-by: Nate Drude <[email protected]> Reviewed-by: Liu Ying <[email protected]> [ Liu Ying: Add JIRA ticket number and use dev_err_probe() ] Signed-off-by: Liu Ying <[email protected]>

[ Upstream commit c1ca8ef ] This adds a sanity check for the i_op pointer of the inode which is returned after reading Root directory MFT record. We should check the i_op is valid before trying to create the root dentry, otherwise we may encounter a NPD while mounting a image with a funny Root directory MFT record. [ 114.484325] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 114.484811] #PF: supervisor read access in kernel mode [ 114.485084] #PF: error_code(0x0000) - not-present page [ 114.485606] PGD 0 P4D 0 [ 114.485975] Oops: 0000 [Freescale#1] PREEMPT SMP KASAN NOPTI [ 114.486570] CPU: 0 PID: 237 Comm: mount Tainted: G B 6.0.0-rc4 Freescale#28 [ 114.486977] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 114.488169] RIP: 0010:d_flags_for_inode+0xe0/0x110 [ 114.488816] Code: 24 f7 ff 49 83 3e 00 74 41 41 83 cd 02 66 44 89 6b 02 eb 92 48 8d 7b 20 e8 6d 24 f7 ff 4c 8b 73 20 49 8d 7e 08 e8 60 241 [ 114.490326] RSP: 0018:ffff8880065e7aa8 EFLAGS: 00000296 [ 114.490695] RAX: 0000000000000001 RBX: ffff888008ccd750 RCX: ffffffff84af2aea [ 114.490986] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff87abd020 [ 114.491364] RBP: ffff8880065e7ac8 R08: 0000000000000001 R09: fffffbfff0f57a05 [ 114.491675] R10: ffffffff87abd027 R11: fffffbfff0f57a04 R12: 0000000000000000 [ 114.491954] R13: 0000000000000008 R14: 0000000000000000 R15: ffff888008ccd750 [ 114.492397] FS: 00007fdc8a627e40(0000) GS:ffff888058200000(0000) knlGS:0000000000000000 [ 114.492797] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 114.493150] CR2: 0000000000000008 CR3: 00000000013ba000 CR4: 00000000000006f0 [ 114.493671] Call Trace: [ 114.493890] <TASK> [ 114.494075] __d_instantiate+0x24/0x1c0 [ 114.494505] d_instantiate.part.0+0x35/0x50 [ 114.494754] d_make_root+0x53/0x80 [ 114.494998] ntfs_fill_super+0x1232/0x1b50 [ 114.495260] ? put_ntfs+0x1d0/0x1d0 [ 114.495499] ? vsprintf+0x20/0x20 [ 114.495723] ? set_blocksize+0x95/0x150 [ 114.495964] get_tree_bdev+0x232/0x370 [ 114.496272] ? put_ntfs+0x1d0/0x1d0 [ 114.496502] ntfs_fs_get_tree+0x15/0x20 [ 114.496859] vfs_get_tree+0x4c/0x130 [ 114.497099] path_mount+0x654/0xfe0 [ 114.497507] ? putname+0x80/0xa0 [ 114.497933] ? finish_automount+0x2e0/0x2e0 [ 114.498362] ? putname+0x80/0xa0 [ 114.498571] ? kmem_cache_free+0x1c4/0x440 [ 114.498819] ? putname+0x80/0xa0 [ 114.499069] do_mount+0xd6/0xf0 [ 114.499343] ? path_mount+0xfe0/0xfe0 [ 114.499683] ? __kasan_check_write+0x14/0x20 [ 114.500133] __x64_sys_mount+0xca/0x110 [ 114.500592] do_syscall_64+0x3b/0x90 [ 114.500930] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 114.501294] RIP: 0033:0x7fdc898e948a [ 114.501542] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 114.502716] RSP: 002b:00007ffd793e58f8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 114.503175] RAX: ffffffffffffffda RBX: 0000564b2228f060 RCX: 00007fdc898e948a [ 114.503588] RDX: 0000564b2228f260 RSI: 0000564b2228f2e0 RDI: 0000564b22297ce0 [ 114.504925] RBP: 0000000000000000 R08: 0000564b2228f280 R09: 0000000000000020 [ 114.505484] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000564b22297ce0 [ 114.505823] R13: 0000564b2228f260 R14: 0000000000000000 R15: 00000000ffffffff [ 114.506562] </TASK> [ 114.506887] Modules linked in: [ 114.507648] CR2: 0000000000000008 [ 114.508884] ---[ end trace 0000000000000000 ]--- [ 114.509675] RIP: 0010:d_flags_for_inode+0xe0/0x110 [ 114.510140] Code: 24 f7 ff 49 83 3e 00 74 41 41 83 cd 02 66 44 89 6b 02 eb 92 48 8d 7b 20 e8 6d 24 f7 ff 4c 8b 73 20 49 8d 7e 08 e8 60 241 [ 114.511762] RSP: 0018:ffff8880065e7aa8 EFLAGS: 00000296 [ 114.512401] RAX: 0000000000000001 RBX: ffff888008ccd750 RCX: ffffffff84af2aea [ 114.513103] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff87abd020 [ 114.513512] RBP: ffff8880065e7ac8 R08: 0000000000000001 R09: fffffbfff0f57a05 [ 114.513831] R10: ffffffff87abd027 R11: fffffbfff0f57a04 R12: 0000000000000000 [ 114.514757] R13: 0000000000000008 R14: 0000000000000000 R15: ffff888008ccd750 [ 114.515411] FS: 00007fdc8a627e40(0000) GS:ffff888058200000(0000) knlGS:0000000000000000 [ 114.515794] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 114.516208] CR2: 0000000000000008 CR3: 00000000013ba000 CR4: 00000000000006f0 Signed-off-by: Edward Lo <[email protected]> Signed-off-by: Konstantin Komarov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4f1dc7d ] Although the attribute name length is checked before comparing it to some common names (e.g., $I30), the offset isn't. This adds a sanity check for the attribute name offset, guarantee the validity and prevent possible out-of-bound memory accesses. [ 191.720056] BUG: unable to handle page fault for address: ffffebde00000008 [ 191.721060] #PF: supervisor read access in kernel mode [ 191.721586] #PF: error_code(0x0000) - not-present page [ 191.722079] PGD 0 P4D 0 [ 191.722571] Oops: 0000 [Freescale#1] PREEMPT SMP KASAN NOPTI [ 191.723179] CPU: 0 PID: 244 Comm: mount Not tainted 6.0.0-rc4 Freescale#28 [ 191.723749] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 191.724832] RIP: 0010:kfree+0x56/0x3b0 [ 191.725870] Code: 80 48 01 d8 0f 82 65 03 00 00 48 c7 c2 00 00 00 80 48 2b 15 2c 06 dd 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 0a 069 [ 191.727375] RSP: 0018:ffff8880076f7878 EFLAGS: 00000286 [ 191.727897] RAX: ffffebde00000000 RBX: 0000000000000040 RCX: ffffffff8528d5b9 [ 191.728531] RDX: 0000777f80000000 RSI: ffffffff8522d49c RDI: 0000000000000040 [ 191.729183] RBP: ffff8880076f78a0 R08: 0000000000000000 R09: 0000000000000000 [ 191.729628] R10: ffff888008949fd8 R11: ffffed10011293fd R12: 0000000000000040 [ 191.730158] R13: ffff888008949f98 R14: ffff888008949ec0 R15: ffff888008949fb0 [ 191.730645] FS: 00007f3520cd7e40(0000) GS:ffff88805ba00000(0000) knlGS:0000000000000000 [ 191.731328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 191.731667] CR2: ffffebde00000008 CR3: 0000000009704000 CR4: 00000000000006f0 [ 191.732568] Call Trace: [ 191.733231] <TASK> [ 191.733860] kvfree+0x2c/0x40 [ 191.734632] ni_clear+0x180/0x290 [ 191.735085] ntfs_evict_inode+0x45/0x70 [ 191.735495] evict+0x199/0x280 [ 191.735996] iput.part.0+0x286/0x320 [ 191.736438] iput+0x32/0x50 [ 191.736811] iget_failed+0x23/0x30 [ 191.737270] ntfs_iget5+0x337/0x1890 [ 191.737629] ? ntfs_clear_mft_tail+0x20/0x260 [ 191.738201] ? ntfs_get_block_bmap+0x70/0x70 [ 191.738482] ? ntfs_objid_init+0xf6/0x140 [ 191.738779] ? ntfs_reparse_init+0x140/0x140 [ 191.739266] ntfs_fill_super+0x121b/0x1b50 [ 191.739623] ? put_ntfs+0x1d0/0x1d0 [ 191.739984] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ 191.740466] ? put_ntfs+0x1d0/0x1d0 [ 191.740787] ? sb_set_blocksize+0x6a/0x80 [ 191.741272] get_tree_bdev+0x232/0x370 [ 191.741829] ? put_ntfs+0x1d0/0x1d0 [ 191.742669] ntfs_fs_get_tree+0x15/0x20 [ 191.743132] vfs_get_tree+0x4c/0x130 [ 191.743457] path_mount+0x654/0xfe0 [ 191.743938] ? putname+0x80/0xa0 [ 191.744271] ? finish_automount+0x2e0/0x2e0 [ 191.744582] ? putname+0x80/0xa0 [ 191.745053] ? kmem_cache_free+0x1c4/0x440 [ 191.745403] ? putname+0x80/0xa0 [ 191.745616] do_mount+0xd6/0xf0 [ 191.745887] ? path_mount+0xfe0/0xfe0 [ 191.746287] ? __kasan_check_write+0x14/0x20 [ 191.746582] __x64_sys_mount+0xca/0x110 [ 191.746850] do_syscall_64+0x3b/0x90 [ 191.747122] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 191.747517] RIP: 0033:0x7f351fee948a [ 191.748332] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 191.749341] RSP: 002b:00007ffd51cf3af8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 191.749960] RAX: ffffffffffffffda RBX: 000055b903733060 RCX: 00007f351fee948a [ 191.750589] RDX: 000055b903733260 RSI: 000055b9037332e0 RDI: 000055b90373bce0 [ 191.751115] RBP: 0000000000000000 R08: 000055b903733280 R09: 0000000000000020 [ 191.751537] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 000055b90373bce0 [ 191.751946] R13: 000055b903733260 R14: 0000000000000000 R15: 00000000ffffffff [ 191.752519] </TASK> [ 191.752782] Modules linked in: [ 191.753785] CR2: ffffebde00000008 [ 191.754937] ---[ end trace 0000000000000000 ]--- [ 191.755429] RIP: 0010:kfree+0x56/0x3b0 [ 191.755725] Code: 80 48 01 d8 0f 82 65 03 00 00 48 c7 c2 00 00 00 80 48 2b 15 2c 06 dd 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 0a 069 [ 191.756744] RSP: 0018:ffff8880076f7878 EFLAGS: 00000286 [ 191.757218] RAX: ffffebde00000000 RBX: 0000000000000040 RCX: ffffffff8528d5b9 [ 191.757580] RDX: 0000777f80000000 RSI: ffffffff8522d49c RDI: 0000000000000040 [ 191.758016] RBP: ffff8880076f78a0 R08: 0000000000000000 R09: 0000000000000000 [ 191.758570] R10: ffff888008949fd8 R11: ffffed10011293fd R12: 0000000000000040 [ 191.758957] R13: ffff888008949f98 R14: ffff888008949ec0 R15: ffff888008949fb0 [ 191.759317] FS: 00007f3520cd7e40(0000) GS:ffff88805ba00000(0000) knlGS:0000000000000000 [ 191.759711] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 191.760118] CR2: ffffebde00000008 CR3: 0000000009704000 CR4: 00000000000006f0 Signed-off-by: Edward Lo <[email protected]> Signed-off-by: Konstantin Komarov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c1ca8ef ] This adds a sanity check for the i_op pointer of the inode which is returned after reading Root directory MFT record. We should check the i_op is valid before trying to create the root dentry, otherwise we may encounter a NPD while mounting a image with a funny Root directory MFT record. [ 114.484325] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 114.484811] #PF: supervisor read access in kernel mode [ 114.485084] #PF: error_code(0x0000) - not-present page [ 114.485606] PGD 0 P4D 0 [ 114.485975] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 114.486570] CPU: 0 PID: 237 Comm: mount Tainted: G B 6.0.0-rc4 #28 [ 114.486977] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 114.488169] RIP: 0010:d_flags_for_inode+0xe0/0x110 [ 114.488816] Code: 24 f7 ff 49 83 3e 00 74 41 41 83 cd 02 66 44 89 6b 02 eb 92 48 8d 7b 20 e8 6d 24 f7 ff 4c 8b 73 20 49 8d 7e 08 e8 60 241 [ 114.490326] RSP: 0018:ffff8880065e7aa8 EFLAGS: 00000296 [ 114.490695] RAX: 0000000000000001 RBX: ffff888008ccd750 RCX: ffffffff84af2aea [ 114.490986] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff87abd020 [ 114.491364] RBP: ffff8880065e7ac8 R08: 0000000000000001 R09: fffffbfff0f57a05 [ 114.491675] R10: ffffffff87abd027 R11: fffffbfff0f57a04 R12: 0000000000000000 [ 114.491954] R13: 0000000000000008 R14: 0000000000000000 R15: ffff888008ccd750 [ 114.492397] FS: 00007fdc8a627e40(0000) GS:ffff888058200000(0000) knlGS:0000000000000000 [ 114.492797] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 114.493150] CR2: 0000000000000008 CR3: 00000000013ba000 CR4: 00000000000006f0 [ 114.493671] Call Trace: [ 114.493890] <TASK> [ 114.494075] __d_instantiate+0x24/0x1c0 [ 114.494505] d_instantiate.part.0+0x35/0x50 [ 114.494754] d_make_root+0x53/0x80 [ 114.494998] ntfs_fill_super+0x1232/0x1b50 [ 114.495260] ? put_ntfs+0x1d0/0x1d0 [ 114.495499] ? vsprintf+0x20/0x20 [ 114.495723] ? set_blocksize+0x95/0x150 [ 114.495964] get_tree_bdev+0x232/0x370 [ 114.496272] ? put_ntfs+0x1d0/0x1d0 [ 114.496502] ntfs_fs_get_tree+0x15/0x20 [ 114.496859] vfs_get_tree+0x4c/0x130 [ 114.497099] path_mount+0x654/0xfe0 [ 114.497507] ? putname+0x80/0xa0 [ 114.497933] ? finish_automount+0x2e0/0x2e0 [ 114.498362] ? putname+0x80/0xa0 [ 114.498571] ? kmem_cache_free+0x1c4/0x440 [ 114.498819] ? putname+0x80/0xa0 [ 114.499069] do_mount+0xd6/0xf0 [ 114.499343] ? path_mount+0xfe0/0xfe0 [ 114.499683] ? __kasan_check_write+0x14/0x20 [ 114.500133] __x64_sys_mount+0xca/0x110 [ 114.500592] do_syscall_64+0x3b/0x90 [ 114.500930] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 114.501294] RIP: 0033:0x7fdc898e948a [ 114.501542] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 114.502716] RSP: 002b:00007ffd793e58f8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 114.503175] RAX: ffffffffffffffda RBX: 0000564b2228f060 RCX: 00007fdc898e948a [ 114.503588] RDX: 0000564b2228f260 RSI: 0000564b2228f2e0 RDI: 0000564b22297ce0 [ 114.504925] RBP: 0000000000000000 R08: 0000564b2228f280 R09: 0000000000000020 [ 114.505484] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000564b22297ce0 [ 114.505823] R13: 0000564b2228f260 R14: 0000000000000000 R15: 00000000ffffffff [ 114.506562] </TASK> [ 114.506887] Modules linked in: [ 114.507648] CR2: 0000000000000008 [ 114.508884] ---[ end trace 0000000000000000 ]--- [ 114.509675] RIP: 0010:d_flags_for_inode+0xe0/0x110 [ 114.510140] Code: 24 f7 ff 49 83 3e 00 74 41 41 83 cd 02 66 44 89 6b 02 eb 92 48 8d 7b 20 e8 6d 24 f7 ff 4c 8b 73 20 49 8d 7e 08 e8 60 241 [ 114.511762] RSP: 0018:ffff8880065e7aa8 EFLAGS: 00000296 [ 114.512401] RAX: 0000000000000001 RBX: ffff888008ccd750 RCX: ffffffff84af2aea [ 114.513103] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff87abd020 [ 114.513512] RBP: ffff8880065e7ac8 R08: 0000000000000001 R09: fffffbfff0f57a05 [ 114.513831] R10: ffffffff87abd027 R11: fffffbfff0f57a04 R12: 0000000000000000 [ 114.514757] R13: 0000000000000008 R14: 0000000000000000 R15: ffff888008ccd750 [ 114.515411] FS: 00007fdc8a627e40(0000) GS:ffff888058200000(0000) knlGS:0000000000000000 [ 114.515794] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 114.516208] CR2: 0000000000000008 CR3: 00000000013ba000 CR4: 00000000000006f0 Signed-off-by: Edward Lo <[email protected]> Signed-off-by: Konstantin Komarov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4f1dc7d ] Although the attribute name length is checked before comparing it to some common names (e.g., $I30), the offset isn't. This adds a sanity check for the attribute name offset, guarantee the validity and prevent possible out-of-bound memory accesses. [ 191.720056] BUG: unable to handle page fault for address: ffffebde00000008 [ 191.721060] #PF: supervisor read access in kernel mode [ 191.721586] #PF: error_code(0x0000) - not-present page [ 191.722079] PGD 0 P4D 0 [ 191.722571] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 191.723179] CPU: 0 PID: 244 Comm: mount Not tainted 6.0.0-rc4 #28 [ 191.723749] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 191.724832] RIP: 0010:kfree+0x56/0x3b0 [ 191.725870] Code: 80 48 01 d8 0f 82 65 03 00 00 48 c7 c2 00 00 00 80 48 2b 15 2c 06 dd 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 0a 069 [ 191.727375] RSP: 0018:ffff8880076f7878 EFLAGS: 00000286 [ 191.727897] RAX: ffffebde00000000 RBX: 0000000000000040 RCX: ffffffff8528d5b9 [ 191.728531] RDX: 0000777f80000000 RSI: ffffffff8522d49c RDI: 0000000000000040 [ 191.729183] RBP: ffff8880076f78a0 R08: 0000000000000000 R09: 0000000000000000 [ 191.729628] R10: ffff888008949fd8 R11: ffffed10011293fd R12: 0000000000000040 [ 191.730158] R13: ffff888008949f98 R14: ffff888008949ec0 R15: ffff888008949fb0 [ 191.730645] FS: 00007f3520cd7e40(0000) GS:ffff88805ba00000(0000) knlGS:0000000000000000 [ 191.731328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 191.731667] CR2: ffffebde00000008 CR3: 0000000009704000 CR4: 00000000000006f0 [ 191.732568] Call Trace: [ 191.733231] <TASK> [ 191.733860] kvfree+0x2c/0x40 [ 191.734632] ni_clear+0x180/0x290 [ 191.735085] ntfs_evict_inode+0x45/0x70 [ 191.735495] evict+0x199/0x280 [ 191.735996] iput.part.0+0x286/0x320 [ 191.736438] iput+0x32/0x50 [ 191.736811] iget_failed+0x23/0x30 [ 191.737270] ntfs_iget5+0x337/0x1890 [ 191.737629] ? ntfs_clear_mft_tail+0x20/0x260 [ 191.738201] ? ntfs_get_block_bmap+0x70/0x70 [ 191.738482] ? ntfs_objid_init+0xf6/0x140 [ 191.738779] ? ntfs_reparse_init+0x140/0x140 [ 191.739266] ntfs_fill_super+0x121b/0x1b50 [ 191.739623] ? put_ntfs+0x1d0/0x1d0 [ 191.739984] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ 191.740466] ? put_ntfs+0x1d0/0x1d0 [ 191.740787] ? sb_set_blocksize+0x6a/0x80 [ 191.741272] get_tree_bdev+0x232/0x370 [ 191.741829] ? put_ntfs+0x1d0/0x1d0 [ 191.742669] ntfs_fs_get_tree+0x15/0x20 [ 191.743132] vfs_get_tree+0x4c/0x130 [ 191.743457] path_mount+0x654/0xfe0 [ 191.743938] ? putname+0x80/0xa0 [ 191.744271] ? finish_automount+0x2e0/0x2e0 [ 191.744582] ? putname+0x80/0xa0 [ 191.745053] ? kmem_cache_free+0x1c4/0x440 [ 191.745403] ? putname+0x80/0xa0 [ 191.745616] do_mount+0xd6/0xf0 [ 191.745887] ? path_mount+0xfe0/0xfe0 [ 191.746287] ? __kasan_check_write+0x14/0x20 [ 191.746582] __x64_sys_mount+0xca/0x110 [ 191.746850] do_syscall_64+0x3b/0x90 [ 191.747122] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 191.747517] RIP: 0033:0x7f351fee948a [ 191.748332] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 191.749341] RSP: 002b:00007ffd51cf3af8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 191.749960] RAX: ffffffffffffffda RBX: 000055b903733060 RCX: 00007f351fee948a [ 191.750589] RDX: 000055b903733260 RSI: 000055b9037332e0 RDI: 000055b90373bce0 [ 191.751115] RBP: 0000000000000000 R08: 000055b903733280 R09: 0000000000000020 [ 191.751537] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 000055b90373bce0 [ 191.751946] R13: 000055b903733260 R14: 0000000000000000 R15: 00000000ffffffff [ 191.752519] </TASK> [ 191.752782] Modules linked in: [ 191.753785] CR2: ffffebde00000008 [ 191.754937] ---[ end trace 0000000000000000 ]--- [ 191.755429] RIP: 0010:kfree+0x56/0x3b0 [ 191.755725] Code: 80 48 01 d8 0f 82 65 03 00 00 48 c7 c2 00 00 00 80 48 2b 15 2c 06 dd 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 0a 069 [ 191.756744] RSP: 0018:ffff8880076f7878 EFLAGS: 00000286 [ 191.757218] RAX: ffffebde00000000 RBX: 0000000000000040 RCX: ffffffff8528d5b9 [ 191.757580] RDX: 0000777f80000000 RSI: ffffffff8522d49c RDI: 0000000000000040 [ 191.758016] RBP: ffff8880076f78a0 R08: 0000000000000000 R09: 0000000000000000 [ 191.758570] R10: ffff888008949fd8 R11: ffffed10011293fd R12: 0000000000000040 [ 191.758957] R13: ffff888008949f98 R14: ffff888008949ec0 R15: ffff888008949fb0 [ 191.759317] FS: 00007f3520cd7e40(0000) GS:ffff88805ba00000(0000) knlGS:0000000000000000 [ 191.759711] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 191.760118] CR2: ffffebde00000008 CR3: 0000000009704000 CR4: 00000000000006f0 Signed-off-by: Edward Lo <[email protected]> Signed-off-by: Konstantin Komarov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 272970b upstream. The driver shutdown callback (which sends EDL_SOC_RESET to the device over serdev) should not be invoked when HCI device is not open (e.g. if hci_dev_open_sync() failed), because the serdev and its TTY are not open either. Also skip this step if device is powered off (qca_power_shutdown()). The shutdown callback causes use-after-free during system reboot with Qualcomm Atheros Bluetooth: Unable to handle kernel paging request at virtual address 0072662f67726fd7 ... CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W 6.1.0-rt5-00325-g8a5f56bcfcca Freescale#8 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: tty_driver_flush_buffer+0x4/0x30 serdev_device_write_flush+0x24/0x34 qca_serdev_shutdown+0x80/0x130 [hci_uart] device_shutdown+0x15c/0x260 kernel_restart+0x48/0xac KASAN report: BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50 Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1 CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 6.1.0-next-20221220-00014-gb85aaf97fb01-dirty Freescale#28 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xdc/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x68/0x84 print_report+0x188/0x488 kasan_report+0xa4/0xf0 __asan_load8+0x80/0xac tty_driver_flush_buffer+0x1c/0x50 ttyport_write_flush+0x34/0x44 serdev_device_write_flush+0x48/0x60 qca_serdev_shutdown+0x124/0x274 device_shutdown+0x1e8/0x350 kernel_restart+0x48/0xb0 __do_sys_reboot+0x244/0x2d0 __arm64_sys_reboot+0x54/0x70 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x44/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xbc/0x140 el0t_64_sync+0x190/0x194 Fixes: 7e7bbdd ("Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot") Cc: <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit e8b7445 ] For quite some time we were chasing a bug which looked like a sudden permanent failure of networking and mmc on some of our devices. The bug was very sensitive to any software changes and even more to any kernel debug options. Finally we got a setup where the problem was reproducible with CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma: [ 16.992082] ------------[ cut here ]------------ [ 16.996779] DMA-API: macb ff0b0000.ethernet: device driver tries to free DMA memory it has not allocated [device address=0x0000000875e3e244] [size=1536 bytes] [ 17.011049] WARNING: CPU: 0 PID: 85 at kernel/dma/debug.c:1011 check_unmap+0x6a0/0x900 [ 17.018977] Modules linked in: xxxxx [ 17.038823] CPU: 0 PID: 85 Comm: irq/55-8000f000 Not tainted 5.4.0 #28 [ 17.045345] Hardware name: xxxxx [ 17.049528] pstate: 60000005 (nZCv daif -PAN -UAO) [ 17.054322] pc : check_unmap+0x6a0/0x900 [ 17.058243] lr : check_unmap+0x6a0/0x900 [ 17.062163] sp : ffffffc010003c40 [ 17.065470] x29: ffffffc010003c40 x28: 000000004000c03c [ 17.070783] x27: ffffffc010da7048 x26: ffffff8878e38800 [ 17.076095] x25: ffffff8879d22810 x24: ffffffc010003cc8 [ 17.081407] x23: 0000000000000000 x22: ffffffc010a08750 [ 17.086719] x21: ffffff8878e3c7c0 x20: ffffffc010acb000 [ 17.092032] x19: 0000000875e3e244 x18: 0000000000000010 [ 17.097343] x17: 0000000000000000 x16: 0000000000000000 [ 17.102647] x15: ffffff8879e4a988 x14: 0720072007200720 [ 17.107959] x13: 0720072007200720 x12: 0720072007200720 [ 17.113261] x11: 0720072007200720 x10: 0720072007200720 [ 17.118565] x9 : 0720072007200720 x8 : 000000000000022d [ 17.123869] x7 : 0000000000000015 x6 : 0000000000000098 [ 17.129173] x5 : 0000000000000000 x4 : 0000000000000000 [ 17.134475] x3 : 00000000ffffffff x2 : ffffffc010a1d370 [ 17.139778] x1 : b420c9d75d27bb00 x0 : 0000000000000000 [ 17.145082] Call trace: [ 17.147524] check_unmap+0x6a0/0x900 [ 17.151091] debug_dma_unmap_page+0x88/0x90 [ 17.155266] gem_rx+0x114/0x2f0 [ 17.158396] macb_poll+0x58/0x100 [ 17.161705] net_rx_action+0x118/0x400 [ 17.165445] __do_softirq+0x138/0x36c [ 17.169100] irq_exit+0x98/0xc0 [ 17.172234] __handle_domain_irq+0x64/0xc0 [ 17.176320] gic_handle_irq+0x5c/0xc0 [ 17.179974] el1_irq+0xb8/0x140 [ 17.183109] xiic_process+0x5c/0xe30 [ 17.186677] irq_thread_fn+0x28/0x90 [ 17.190244] irq_thread+0x208/0x2a0 [ 17.193724] kthread+0x130/0x140 [ 17.196945] ret_from_fork+0x10/0x20 [ 17.200510] ---[ end trace 7240980785f81d6f ]--- [ 237.021490] ------------[ cut here ]------------ [ 237.026129] DMA-API: exceeded 7 overlapping mappings of cacheline 0x0000000021d79e7b [ 237.033886] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:499 add_dma_entry+0x214/0x240 [ 237.041802] Modules linked in: xxxxx [ 237.061637] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0 #28 [ 237.068941] Hardware name: xxxxx [ 237.073116] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 237.077900] pc : add_dma_entry+0x214/0x240 [ 237.081986] lr : add_dma_entry+0x214/0x240 [ 237.086072] sp : ffffffc010003c30 [ 237.089379] x29: ffffffc010003c30 x28: ffffff8878a0be00 [ 237.094683] x27: 0000000000000180 x26: ffffff8878e387c0 [ 237.099987] x25: 0000000000000002 x24: 0000000000000000 [ 237.105290] x23: 000000000000003b x22: ffffffc010a0fa00 [ 237.110594] x21: 0000000021d79e7b x20: ffffffc010abe600 [ 237.115897] x19: 00000000ffffffef x18: 0000000000000010 [ 237.121201] x17: 0000000000000000 x16: 0000000000000000 [ 237.126504] x15: ffffffc010a0fdc8 x14: 0720072007200720 [ 237.131807] x13: 0720072007200720 x12: 0720072007200720 [ 237.137111] x11: 0720072007200720 x10: 0720072007200720 [ 237.142415] x9 : 0720072007200720 x8 : 0000000000000259 [ 237.147718] x7 : 0000000000000001 x6 : 0000000000000000 [ 237.153022] x5 : ffffffc010003a20 x4 : 0000000000000001 [ 237.158325] x3 : 0000000000000006 x2 : 0000000000000007 [ 237.163628] x1 : 8ac721b3a7dc1c00 x0 : 0000000000000000 [ 237.168932] Call trace: [ 237.171373] add_dma_entry+0x214/0x240 [ 237.175115] debug_dma_map_page+0xf8/0x120 [ 237.179203] gem_rx_refill+0x190/0x280 [ 237.182942] gem_rx+0x224/0x2f0 [ 237.186075] macb_poll+0x58/0x100 [ 237.189384] net_rx_action+0x118/0x400 [ 237.193125] __do_softirq+0x138/0x36c [ 237.196780] irq_exit+0x98/0xc0 [ 237.199914] __handle_domain_irq+0x64/0xc0 [ 237.204000] gic_handle_irq+0x5c/0xc0 [ 237.207654] el1_irq+0xb8/0x140 [ 237.210789] arch_cpu_idle+0x40/0x200 [ 237.214444] default_idle_call+0x18/0x30 [ 237.218359] do_idle+0x200/0x280 [ 237.221578] cpu_startup_entry+0x20/0x30 [ 237.225493] rest_init+0xe4/0xf0 [ 237.228713] arch_call_rest_init+0xc/0x14 [ 237.232714] start_kernel+0x47c/0x4a8 [ 237.236367] ---[ end trace 7240980785f81d70 ]--- Lars was fast to find an explanation: according to the datasheet bit 2 of the rx buffer descriptor entry has a different meaning in the extended mode: Address [2] of beginning of buffer, or in extended buffer descriptor mode (DMA configuration register [28] = 1), indicates a valid timestamp in the buffer descriptor entry. The macb driver didn't mask this bit while getting an address and it eventually caused a memory corruption and a dma failure. The problem is resolved by explicitly clearing the problematic bit if hw timestamping is used. Fixes: 7b42961 ("net: macb: Add support for PTP timestamps in DMA descriptors") Signed-off-by: Roman Gushchin <[email protected]> Co-developed-by: Lars-Peter Clausen <[email protected]> Signed-off-by: Lars-Peter Clausen <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

A wait operation can be interrupted for the following reasons: - a signal was received while waiting for the event. - the caller got forcibly unblocked while waiting for the event. - a signal was received or the caller got forcibly unblocked while trying to reacquire the lock once the event was successfully received. Ensure these conditions are differentiated when returning to the caller via the operation status (req.status), which enables the user interface to decide whether it needs to restart the syscall transparently after some fixups on signal receipt, or bail out on error if forcibly unblocked for any other reason. This change causes a bump of the current ABI version (Freescale#28). However, it does not affect current and older libevl releases since none of them check the operation status when an interrupted wait is detected. Signed-off-by: Philippe Gerum <[email protected]>

gregkh and others added 30 commits June 26, 2018 08:08

objtool: update .gitignore file

ccd19d3

With the recent sync with objtool from 4.14.y, the objtool .gitignore file was forgotten. Fix that up now to properly handle the change in where the autogenerated files live. Signed-off-by: Greg Kroah-Hartman <[email protected]>

Revert "Btrfs: fix scrub to repair raid6 corruption"

1fab25c

This reverts commit 186a651. This commit used an incorrect log message. Reported-by: Ben Hutchings <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Merge tag 'v4.9.110' into 4.9-2.0.x-imx #28

Merge tag 'v4.9.110' into 4.9-2.0.x-imx #28

gibsson commented Jun 26, 2018

Merge tag 'v4.9.110' into 4.9-2.0.x-imx #28

Merge tag 'v4.9.110' into 4.9-2.0.x-imx #28

Conversation

gibsson commented Jun 26, 2018