Merge pull request #307 from zandrey/5.4-2.1.x-imx

Update 5.4-2.1.x-imx up to v5.4.112

Documentation/devicetree/bindings/net/ethernet-controller.yaml

@@ -60,7 +60,7 @@ properties:
     description:
       Reference to an nvmem node for the MAC address
 
-  nvmem-cells-names:
+  nvmem-cell-names:
     const: mac-address
 
   nvmem_macaddr_swap:

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 4
-SUBLEVEL = 111
+SUBLEVEL = 112
 EXTRAVERSION =
 NAME = Kleptomaniac Octopus
 

arch/arm/boot/dts/armada-385-turris-omnia.dts

@@ -236,6 +236,7 @@
 		status = "okay";
 		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		marvell,reg-init = <3 18 0 0x4985>;
 
 		/* irq is connected to &pcawan pin 7 */
 	};

arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi

@@ -432,6 +432,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd1_reg>;
 	status = "disabled";
 };
 
@@ -441,5 +442,6 @@
 		     &pinctrl_usdhc3_cdwp>;
 	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd0_reg>;
 	status = "disabled";
 };

arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h

@@ -124,7 +124,7 @@
 #define MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD                                     0x0A4 0x30C 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1                                      0x0A4 0x30C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0                                 0x0A8 0x310 0x000 0x0 0x0
-#define MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x31  0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x310 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1                                 0x0AC 0x314 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3                                    0x0AC 0x314 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2                                 0x0B0 0x318 0x000 0x0 0x0

arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h

@@ -130,7 +130,7 @@
 #define MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                                     0x0A4 0x30C 0x000 0x0 0x0
 #define MX8MQ_IOMUXC_SD1_CMD_GPIO2_IO1                                      0x0A4 0x30C 0x000 0x5 0x0
 #define MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0                                 0x0A8 0x310 0x000 0x0 0x0
-#define MX8MQ_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x31  0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x310 0x000 0x5 0x0
 #define MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1                                 0x0AC 0x314 0x000 0x0 0x0
 #define MX8MQ_IOMUXC_SD1_DATA1_GPIO2_IO3                                    0x0AC 0x314 0x000 0x5 0x0
 #define MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2                                 0x0B0 0x318 0x000 0x0 0x0

arch/ia64/include/asm/ptrace.h

@@ -54,8 +54,7 @@
 
 static inline unsigned long user_stack_pointer(struct pt_regs *regs)
 {
-	/* FIXME: should this be bspstore + nr_dirty regs? */
-	return regs->ar_bspstore;
+	return regs->r12;
 }
 
 static inline int is_syscall_success(struct pt_regs *regs)
@@ -79,11 +78,6 @@ static inline long regs_return_value(struct pt_regs *regs)
 	unsigned long __ip = instruction_pointer(regs);			\
 	(__ip & ~3UL) + ((__ip & 3UL) << 2);				\
 })
-/*
- * Why not default?  Because user_stack_pointer() on ia64 gives register
- * stack backing store instead...
- */
-#define current_user_stack_pointer() (current_pt_regs()->r12)
 
   /* given a pointer to a task_struct, return the user's pt_regs */
 # define task_pt_regs(t)		(((struct pt_regs *) ((char *) (t) + IA64_STK_OFFSET)) - 1)

arch/nds32/mm/cacheflush.c

@@ -239,7 +239,7 @@ void flush_dcache_page(struct page *page)
 {
 	struct address_space *mapping;
 
-	mapping = page_mapping(page);
+	mapping = page_mapping_file(page);
 	if (mapping && !mapping_mapped(mapping))
 		set_bit(PG_dcache_dirty, &page->flags);
 	else {

arch/parisc/include/asm/cmpxchg.h

@@ -72,7 +72,7 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size)
 #endif
 	case 4: return __cmpxchg_u32((unsigned int *)ptr,
 				     (unsigned int)old, (unsigned int)new_);
-	case 1: return __cmpxchg_u8((u8 *)ptr, (u8)old, (u8)new_);
+	case 1: return __cmpxchg_u8((u8 *)ptr, old & 0xff, new_ & 0xff);
 	}
 	__cmpxchg_called_with_bad_pointer();
 	return old;

arch/s390/kernel/cpcmd.c

@@ -37,10 +37,12 @@ static int diag8_noresponse(int cmdlen)
 
 static int diag8_response(int cmdlen, char *response, int *rlen)
 {
+	unsigned long _cmdlen = cmdlen | 0x40000000L;
+	unsigned long _rlen = *rlen;
 	register unsigned long reg2 asm ("2") = (addr_t) cpcmd_buf;
 	register unsigned long reg3 asm ("3") = (addr_t) response;
-	register unsigned long reg4 asm ("4") = cmdlen | 0x40000000L;
-	register unsigned long reg5 asm ("5") = *rlen;
+	register unsigned long reg4 asm ("4") = _cmdlen;
+	register unsigned long reg5 asm ("5") = _rlen;
 
 	asm volatile(
 		"	diag	%2,%0,0x8\n"

drivers/char/agp/Kconfig

@@ -125,7 +125,7 @@ config AGP_HP_ZX1
 
 config AGP_PARISC
 	tristate "HP Quicksilver AGP support"
-	depends on AGP && PARISC && 64BIT
+	depends on AGP && PARISC && 64BIT && IOMMU_SBA
 	help
 	  This option gives you AGP GART support for the HP Quicksilver
 	  AGP bus adapter on HP PA-RISC machines (Ok, just on the C8000

drivers/clk/clk.c

@@ -4152,20 +4152,19 @@ int clk_notifier_register(struct clk *clk, struct notifier_block *nb)
 	/* search the list of notifiers for this clk */
 	list_for_each_entry(cn, &clk_notifier_list, node)
 		if (cn->clk == clk)
-			break;
+			goto found;
 
 	/* if clk wasn't in the notifier list, allocate new clk_notifier */
-	if (cn->clk != clk) {
-		cn = kzalloc(sizeof(*cn), GFP_KERNEL);
-		if (!cn)
-			goto out;
+	cn = kzalloc(sizeof(*cn), GFP_KERNEL);
+	if (!cn)
+		goto out;
 
-		cn->clk = clk;
-		srcu_init_notifier_head(&cn->notifier_head);
+	cn->clk = clk;
+	srcu_init_notifier_head(&cn->notifier_head);
 
-		list_add(&cn->node, &clk_notifier_list);
-	}
+	list_add(&cn->node, &clk_notifier_list);
 
+found:
 	ret = srcu_notifier_chain_register(&cn->notifier_head, nb);
 
 	clk->core->notifier_count++;
@@ -4190,32 +4189,28 @@ EXPORT_SYMBOL_GPL(clk_notifier_register);
  */
 int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb)
 {
-	struct clk_notifier *cn = NULL;
-	int ret = -EINVAL;
+	struct clk_notifier *cn;
+	int ret = -ENOENT;
 
 	if (!clk || !nb)
 		return -EINVAL;
 
 	clk_prepare_lock();
 
-	list_for_each_entry(cn, &clk_notifier_list, node)
-		if (cn->clk == clk)
-			break;
-
-	if (cn->clk == clk) {
-		ret = srcu_notifier_chain_unregister(&cn->notifier_head, nb);
+	list_for_each_entry(cn, &clk_notifier_list, node) {
+		if (cn->clk == clk) {
+			ret = srcu_notifier_chain_unregister(&cn->notifier_head, nb);
 
-		clk->core->notifier_count--;
+			clk->core->notifier_count--;
 
-		/* XXX the notifier code should handle this better */
-		if (!cn->notifier_head.head) {
-			srcu_cleanup_notifier_head(&cn->notifier_head);
-			list_del(&cn->node);
-			kfree(cn);
+			/* XXX the notifier code should handle this better */
+			if (!cn->notifier_head.head) {
+				srcu_cleanup_notifier_head(&cn->notifier_head);
+				list_del(&cn->node);
+				kfree(cn);
+			}
+			break;
 		}
-
-	} else {
-		ret = -ENOENT;
 	}
 
 	clk_prepare_unlock();

drivers/clk/socfpga/clk-gate.c

@@ -99,7 +99,7 @@ static unsigned long socfpga_clk_recalc_rate(struct clk_hw *hwclk,
 		val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift;
 		val &= GENMASK(socfpgaclk->width - 1, 0);
 		/* Check for GPIO_DB_CLK by its offset */
-		if ((int) socfpgaclk->div_reg & SOCFPGA_GPIO_DB_CLK_OFFSET)
+		if ((uintptr_t) socfpgaclk->div_reg & SOCFPGA_GPIO_DB_CLK_OFFSET)
 			div = val + 1;
 		else
 			div = (1 << val);

drivers/counter/stm32-timer-cnt.c

@@ -24,7 +24,6 @@ struct stm32_timer_cnt {
 	struct counter_device counter;
 	struct regmap *regmap;
 	struct clk *clk;
-	u32 ceiling;
 	u32 max_arr;
 };
 
@@ -67,14 +66,15 @@ static int stm32_count_write(struct counter_device *counter,
 			     struct counter_count_write_value *val)
 {
 	struct stm32_timer_cnt *const priv = counter->priv;
-	u32 cnt;
+	u32 cnt, ceiling;
 	int err;
 
 	err = counter_count_write_value_get(&cnt, COUNTER_COUNT_POSITION, val);
 	if (err)
 		return err;
 
-	if (cnt > priv->ceiling)
+	regmap_read(priv->regmap, TIM_ARR, &ceiling);
+	if (cnt > ceiling)
 		return -EINVAL;
 
 	return regmap_write(priv->regmap, TIM_CNT, cnt);
@@ -136,10 +136,6 @@ static int stm32_count_function_set(struct counter_device *counter,
 
 	regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0);
 
-	/* TIMx_ARR register shouldn't be buffered (ARPE=0) */
-	regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0);
-	regmap_write(priv->regmap, TIM_ARR, priv->ceiling);
-
 	regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, sms);
 
 	/* Make sure that registers are updated */
@@ -197,7 +193,6 @@ static ssize_t stm32_count_ceiling_write(struct counter_device *counter,
 	regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0);
 	regmap_write(priv->regmap, TIM_ARR, ceiling);
 
-	priv->ceiling = ceiling;
 	return len;
 }
 
@@ -369,7 +364,6 @@ static int stm32_timer_cnt_probe(struct platform_device *pdev)
 
 	priv->regmap = ddata->regmap;
 	priv->clk = ddata->clk;
-	priv->ceiling = ddata->max_arr;
 	priv->max_arr = ddata->max_arr;
 
 	priv->counter.name = dev_name(dev);

drivers/gpu/drm/i915/display/intel_acpi.c

@@ -83,13 +83,31 @@ static void intel_dsm_platform_mux_info(acpi_handle dhandle)
 		return;
 	}
 
+	if (!pkg->package.count) {
+		DRM_DEBUG_DRIVER("no connection in _DSM\n");
+		return;
+	}
+
 	connector_count = &pkg->package.elements[0];
 	DRM_DEBUG_DRIVER("MUX info connectors: %lld\n",
 		  (unsigned long long)connector_count->integer.value);
 	for (i = 1; i < pkg->package.count; i++) {
 		union acpi_object *obj = &pkg->package.elements[i];
-		union acpi_object *connector_id = &obj->package.elements[0];
-		union acpi_object *info = &obj->package.elements[1];
+		union acpi_object *connector_id;
+		union acpi_object *info;
+
+		if (obj->type != ACPI_TYPE_PACKAGE || obj->package.count < 2) {
+			DRM_DEBUG_DRIVER("Invalid object for MUX #%d\n", i);
+			continue;
+		}
+
+		connector_id = &obj->package.elements[0];
+		info = &obj->package.elements[1];
+		if (info->type != ACPI_TYPE_BUFFER || info->buffer.length < 4) {
+			DRM_DEBUG_DRIVER("Invalid info for MUX obj #%d\n", i);
+			continue;
+		}
+
 		DRM_DEBUG_DRIVER("Connector id: 0x%016llx\n",
 			  (unsigned long long)connector_id->integer.value);
 		DRM_DEBUG_DRIVER("  port id: %s\n",

drivers/gpu/drm/msm/msm_drv.c

@@ -567,6 +567,7 @@ static int msm_drm_init(struct device *dev, struct drm_driver *drv)
 	kfree(priv);
 err_put_drm_dev:
 	drm_dev_put(ddev);
+	platform_set_drvdata(pdev, NULL);
 	return ret;
 }
 

drivers/i2c/i2c-core-base.c

@@ -254,13 +254,14 @@ EXPORT_SYMBOL_GPL(i2c_recover_bus);
 static void i2c_init_recovery(struct i2c_adapter *adap)
 {
 	struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
-	char *err_str;
+	char *err_str, *err_level = KERN_ERR;
 
 	if (!bri)
 		return;
 
 	if (!bri->recover_bus) {
-		err_str = "no recover_bus() found";
+		err_str = "no suitable method provided";
+		err_level = KERN_DEBUG;
 		goto err;
 	}
 
@@ -290,7 +291,7 @@ static void i2c_init_recovery(struct i2c_adapter *adap)
 
 	return;
  err:
-	dev_err(&adap->dev, "Not using recovery: %s\n", err_str);
+	dev_printk(err_level, &adap->dev, "Not using recovery: %s\n", err_str);
 	adap->bus_recovery_info = NULL;
 }
 

drivers/infiniband/core/addr.c

@@ -76,7 +76,9 @@ static struct workqueue_struct *addr_wq;
 
 static const struct nla_policy ib_nl_addr_policy[LS_NLA_TYPE_MAX] = {
 	[LS_NLA_TYPE_DGID] = {.type = NLA_BINARY,
-		.len = sizeof(struct rdma_nla_ls_gid)},
+		.len = sizeof(struct rdma_nla_ls_gid),
+		.validation_type = NLA_VALIDATE_MIN,
+		.min = sizeof(struct rdma_nla_ls_gid)},
 };
 
 static inline bool ib_nl_is_good_ip_resp(const struct nlmsghdr *nlh)

drivers/infiniband/hw/cxgb4/cm.c

@@ -3616,7 +3616,8 @@ int c4iw_destroy_listen(struct iw_cm_id *cm_id)
 		c4iw_init_wr_wait(ep->com.wr_waitp);
 		err = cxgb4_remove_server(
 				ep->com.dev->rdev.lldi.ports[0], ep->stid,
-				ep->com.dev->rdev.lldi.rxq_ids[0], true);
+				ep->com.dev->rdev.lldi.rxq_ids[0],
+				ep->com.local_addr.ss_family == AF_INET6);
 		if (err)
 			goto done;
 		err = c4iw_wait_for_reply(&ep->com.dev->rdev, ep->com.wr_waitp,

drivers/net/can/usb/peak_usb/pcan_usb_core.c

@@ -856,7 +856,7 @@ static int peak_usb_create_dev(const struct peak_usb_adapter *peak_usb_adapter,
 	if (dev->adapter->dev_set_bus) {
 		err = dev->adapter->dev_set_bus(dev, 0);
 		if (err)
-			goto lbl_unregister_candev;
+			goto adap_dev_free;
 	}
 
 	/* get device number early */
@@ -868,6 +868,10 @@ static int peak_usb_create_dev(const struct peak_usb_adapter *peak_usb_adapter,
 
 	return 0;
 
+adap_dev_free:
+	if (dev->adapter->dev_free)
+		dev->adapter->dev_free(dev);
+
 lbl_unregister_candev:
 	unregister_candev(netdev);