Package mp4ff implements MP4 media file parsing and writing for AVC and HEVC video, AAC and AC-3 audio, and stpp and wvtt subtitles.
It is focused on fragmented files as used for streaming in DASH, MSS and HLS fMP4, but can also decode and encode all boxes needed for
progressive MP4 files. In particular, the tool mp4ff-crop
can be
used to crop a progressive file.
Some useful command line tools are available in cmd
.
mp4ff-info
prints a tree of the box hierarchy of a mp4 file with information about the boxes. The level of detail can be increased with the option-l
, like-l all:1
for all boxes or-l trun:1,stss:1
for specific boxes.mp4ff-pslister
extracts and displays SPS and PPS for AVC or HEVC in a mp4 or a bytestream (Annex B) file. Partial information is printed for HEVC.mp4ff-nallister
lists NALUs and picture types for video in progressive or fragmented filemp4ff-subslister
lists details of wvtt or stpp (WebVTT or TTML in ISOBMFF) subtitle samplesmp4ff-crop
shortens a progressive mp4 file to a specified durationmp4ff-encrypt
encrypts a fragmented file using cenc or cbcs Common Encryption schememp4ff-decrypt
decrypts a fragmented file encrypted using cenc or cbcs Common Encryption scheme
You can install these tools by going to their respective directory and run go install .
or directly from the repo with
go install github.com/Eyevinn/mp4ff/cmd/mp4ff-info@latest
Example code is available in the examples
directory.
The examples and their functions are:
initcreator
creates typical init segments (ftyp + moov) for video and audioresegmenter
reads a segmented file (CMAF track) and resegments it with other segment durations usingfullSample
segmenter
takes a progressive mp4 file and creates init and media segments from it. This tool has been extended to support generation of segments with multiple tracks as well as reading and writingmdat
in lazy modemultitrack
parses a fragmented file with multiple trackscombine-segs
combines single-track init and media segments into multi-track segments
The library has functions for parsing (called Decode) and writing (Encode) in the package mp4ff/mp4
.
It also contains codec specific parsing of AVC/H.264 including complete parsing of
SPS and PPS in the package mp4ff.avc
. HEVC/H.265 parsing is less complete, and available as mp4ff.hevc
.
Supplementary Enhancement Information can be parsed and written using the package mp4ff.sei
.
Traditional multiplexed non-fragmented mp4 files can be parsed and decoded, but the focus is on fragmented mp4 files as used in DASH, HLS, and CMAF.
Beyond single-track fragmented files, support has been added to parse and generate multi-track
fragmented files as can be seen in examples/segment
and examples/multitrack
.
The top level structure for both non-fragmented and fragmented mp4 files is mp4.File
.
In a progressive (non-fragmented) mp4.File
, the top level attributes Ftyp, Moov, and Mdat points to the corresponding boxes.
A fragmented mp4.File
can be more or less complete, like a single init segment,
one or more media segments, or a combination of both like a CMAF track which renders
into a playable one-track asset. It can also have multiple tracks.
For fragmented files, the following high-level attributes are used:
Init
contains aftyp
and amoov
box and provides the general metadata for a fragmented file. It corresponds to a CMAF header. It can also contain one or moresidx
boxes.Segments
is a slice ofMediaSegment
which start with an optionalstyp
box, possibly one or moresidx boxes and then one or more
Fragment`s.Fragment
is a mp4 fragment with exactly onemoof
box followed by amdat
box where the latter contains the media data. It can have one or moretrun
boxes containing the metadata for the samples.
All child boxes of container box such as MoovBox
are listed in the Children
attribute, but the
most prominent child boxes have direct links with names which makes it possible to write a path such
as
fragment.Moof.Traf.Trun
to access the (only) trun
box in a fragment with only one traf
box, or
fragment.Moof.Trafs[1].Trun[1]
to get the second trun
of the second traf
box (provided that they exist). Care must be
taken to assert that none of the intermediate pointers are nil to avoid panic
.
A typical use case is to a fragment consisting of an init segment followed by a series of media segments.
The first step is to create the init segment. This is done in three steps as can be seen in
examples/initcreator
:
init := mp4.CreateEmptyInit()
init.AddEmptyTrack(timescale, mediatype, language)
init.Moov.Trak.SetHEVCDescriptor("hvc1", vpsNALUs, spsNALUs, ppsNALUs)
Here the third step fills in codec-specific parameters into the sample descriptor of the single track.
Multiple tracks are also available via the slice attribute Traks
instead of Trak
.
The second step is to start producing media segments. They should use the timescale that was set when creating the init segment. Generally, that timescale should be chosen so that the sample durations have exact values without rounding errors.
A media segment contains one or more fragments, where each fragment has a moof
and a mdat
box.
If all samples are available before the segment is created, one can use a single
fragment in each segment. Example code for this can be found in examples/segmenter
.
A simple, but not optimal, way of creating a media segment is to first create a slice of FullSample
with the data needed.
The definition of mp4.FullSample
is
mp4.FullSample{
Sample: mp4.Sample{
Flags uint32 // Flag sync sample etc
Dur uint32 // Sample duration in mdhd timescale
Size uint32 // Size of sample data
Cto int32 // Signed composition time offset
},
DecodeTime uint64 // Absolute decode time (offset + accumulated sample Dur)
Data []byte // Sample data
}
The mp4.Sample
part is what will be written into the trun
box.
DecodeTime
is the media timeline accumulated time.
The DecodeTime
value of the first sample of a fragment, will
be set as the BaseMediaDecodeTime
in the tfdt
box.
Once a number of such full samples are available, they can be added to a media segment like
seg := mp4.NewMediaSegment()
frag := mp4.CreateFragment(uint32(segNr), mp4.DefaultTrakID)
seg.AddFragment(frag)
for _, sample := range samples {
frag.AddFullSample(sample)
}
This segment can finally be output to a w io.Writer
as
err := seg.Encode(w)
For multi-track segments, the code is a bit more involved. Please have a look at examples/segmenter
to see how it is done. A more optimal way of handling media sample is
to handle them lazily, as explained next.
For video and audio, the dominating part of a mp4 file is the media data which is stored
in one or more mdat
boxes. In some cases, for example when segmenting large progressive
files, it is much more memory efficient to just read the movie or fragment data
from the moov
or moof
box and defer the reading of the media data from the mdat
box
to later.
For decoding, this is supported by running mp4.DecodeFile()
in lazy mode as
parsedMp4, err = mp4.DecodeFile(ifd, mp4.WithDecodeMode(mp4.DecModeLazyMdat))
In this case, the media data of the mdat
box will not be read, but only its size is being set.
To read or copy the actual data corresponding to a sample, one must calculate the
corresponding byte range and either call
func (m *MdatBox) ReadData(start, size int64, rs io.ReadSeeker) ([]byte, error)
or
func (m *MdatBox) CopyData(start, size int64, rs io.ReadSeeker, w io.Writer) (nrWritten int64, err error)
Example code for this, including lazy writing of mdat
, can be found in examples/segmenter
with the lazy
mode set.
The use of the interfaces io.Reader
and io.Writer
for reading and writing boxes gives a lot of
flexibility, but is not optimal when it comes to memory allocation. In particular, the
Read(p []byte)
method needs a slice p
of the proper size to read data, which leads to a
lot of allocations and copying of data.
In order to achieve better performance, it is advantageous to read the full top level boxes into
one, or a few, slices and decode these.
To enable that mode, version 0.27 of the code introduced DecodeX(sr bits.SliceReader)
methods to every box X where mp4ff.bits.SliceReader
is an interface.
For example, the TrunBox
gets the method DecodeTrunSR(sr bits.SliceReader)
in addition to its old
DecodeTrun(r io.Reader)
method. The bits.SliceReader
interface provides methods to read all kinds
of data structures from an underlying slice of bytes. It has an implementation bits.FixedSliceReader
which uses a fixed-size slice as underlying slice, but one could consider implementing a growing version
which would get its data from some external source.
The memory allocation and speed improvements achieved by this may vary, but should be substantial,
especially compared to versions before 0.27 which used an extra io.LimitReader
layer.
Fur further reduction of memory allocation when reading the ´mdat` data of a progressive file, some sort of buffered reader should be used.
To investigate the efficiency of the new SliceReader and SliceWriter methods, benchmarks have been done.
The benchmarks are defined in
the file mp4/benchmarks_test.go
and mp4/benchmarks_srw_test.go
.
For DecodeFile
, one can see a big improvement by going from version
0.26 to version 0.27 which both use the io.Reader
interface
but another big increase by using the SliceReader
source.
The latter benchmarks are called BenchmarkDecodeFileSR
but have
here been given the same name, for easy comparison.
Note that the allocations here refers to the heap allocations
that are done inside the benchmark loop. Outside that loop,
a slice is allocated to keep the input data.
For EncodeFile
, one can see that v0.27 is actually worse
than v0.26 when used with the io.Writer
interface. That is
because the code was restructured so that all writes go
via the SliceWriter
layer in order to reduce code duplication.
However, if instead using the SliceWriter
methods directly,
there is a big relative gain in allocations as can be seen in
the last column.
name \ time/op | v0.26 | v0.27 | v0.27-srw |
---|---|---|---|
DecodeFile/1.m4s-16 | 21.9µs | 6.7µs | 2.6µs |
DecodeFile/prog_8s.mp4-16 | 143µs | 48µs | 16µs |
EncodeFile/1.m4s-16 | 1.70µs | 2.14µs | 1.50µs |
EncodeFile/prog_8s.mp4-16 | 15.7µs | 18.4µs | 12.9µs |
name \ alloc/op | v0.26 | v0.27 | v0.27-srw |
---|---|---|---|
DecodeFile/1.m4s-16 | 120kB | 28kB | 2kB |
DecodeFile/prog_8s.mp4-16 | 906kB | 207kB | 12kB |
EncodeFile/1.m4s-16 | 1.16kB | 1.39kB | 0.08kB |
EncodeFile/prog_8s.mp4-16 | 6.84kB | 8.30kB | 0.05kB |
name \ allocs/op | v0.26 | v0.27 | v0.27-srw |
---|---|---|---|
DecodeFile/1.m4s-16 | 98.0 | 42.0 | 34.0 |
DecodeFile/prog_8s.mp4-16 | 454 | 180 | 169 |
EncodeFile/1.m4s-16 | 15.0 | 15.0 | 3.0 |
EncodeFile/prog_8s.mp4-16 | 101 | 86 | 1 |
Most boxes have their own file named after the box, but in some cases, there may be multiple boxes
that have the same content, and the code file then has a generic name like
mp4/visualsampleentry.go
.
The Box interface is specified in mp4/box.go
. It does not contain decode (parsing) methods which have
distinct names for each box type and are dispatched,
The mapping for decoding dispatch is given in the table mp4.decoders
for the
io.Reader
methods and in mp4.decodersSR
for the mp4ff.bits.SliceReader
methods.
To implement a new box fooo
, the following is needed.
Create a file fooo.go
and create a struct type FoooBox
.
FoooBox
must implement the Box interface methods:
Type()
Size()
Encode(w io.Writer)
EncodeSW(sw bits.SliceWriter) // new in v0.27.0
Info()
It also needs its own decode method DecodeFooo
, which must be added in the decoders
map in box.go
,
and the new in v0.27.0 DecodeFoooSR
method in decodersSR
.
For a simple example, look at the PrftBox
in prft.go
.
A test file fooo_test.go
should also have a test using the method boxDiffAfterEncodeAndDecode
to check that
the box information is equal after encoding and decoding.
Many attributes are public and can therefore be changed in freely. The advantage of this is that it is possible to write code that can manipulate boxes in many different ways, but one must be cautious to avoid breaking links to sub boxes or create inconsistent states in the boxes.
As an example, container boxes such as TrafBox
have a method AddChild
which
adds a box to Children
, its slice of children boxes, but also sets a specific
member reference such as Tfdt
to point to that box. If Children
is manipulated
directly, that link may not be valid.
For fragmented files, one can choose to either encode all boxes in a mp4.File
, or only code
the ones which are included in the init and media segments. The attribute that controls that
is called FragEncMode
.
Another attribute EncOptimize
controls possible optimizations of the file encoding process.
Currently, there is only one possible optimization called OptimizeTrun
.
It can reduce the size of the TrunBox
by finding and writing default
values in the TfhdBox
and omitting the corresponding values from the TrunBox
.
Note that this may change the size of all ancestor boxes of trun
.
Following the ISOBMFF standard, sample numbers and other numbers start at 1 (one-based). This applies to arguments of functions and methods. The actual storage in slices is zero-based, so sample nr 1 has index 0 in the corresponding slice.
The APIs should be fairly stable, but minor non-backwards-compatible changes may happen until version 1.
The main specification for the MP4 file format is the ISO Base Media File Format (ISOBMFF) standard ISO/IEC 14496-12 6th edition 2020. Some boxes are specified in other standards, as should be commented in the code.
MIT, see LICENSE.
Some code in pkg/mp4, comes from or is based on https://github.com/jfbus/mp4 which has
Copyright (c) 2015 Jean-François Bustarret
.
Some code in pkg/bits comes from or is based on https://github.com/tcnksm/go-casper/tree/master/internal/bits
Copyright (c) 2017 Taichi Nakashima
.
See CHANGELOG.md.
Join our community on Slack where you can post any questions regarding any of our open source projects. Eyevinn's consulting business can also offer you:
- Further development of this component
- Customization and integration of this component into your platform
- Support and maintenance agreement
Contact [email protected] if you are interested.
Eyevinn Technology is an independent consultant firm specialized in video and streaming. Independent in a way that we are not commercially tied to any platform or technology vendor. As our way to innovate and push the industry forward we develop proof-of-concepts and tools. The things we learn and the code we write we share with the industry in blogs and by open sourcing the code we have written.
Want to know more about Eyevinn and how it is to work here. Contact us at [email protected]!