i2c: designware: Fix system suspend

The commit 8503ff1 ("i2c: designware: Avoid unnecessary resuming
during system suspend"), may suggest to the PM core to try out the so
called direct_complete path for system sleep. In this path, the PM core
treats a runtime suspended device as it's already in a proper low power
state for system sleep, which makes it skip calling the system sleep
callbacks for the device, except for the ->prepare() and the ->complete()
callbacks.

However, the PM core may unset the direct_complete flag for a parent
device, in case its child device are being system suspended before. In this
scenario, the PM core invokes the system sleep callbacks, no matter if the
device is runtime suspended or not.

Particularly in cases of an existing i2c slave device, the above path is
triggered, which breaks the assumption that the i2c device is always
runtime resumed whenever the dw_i2c_plat_suspend() is being called.

More precisely, dw_i2c_plat_suspend() calls clk_core_disable() and
clk_core_unprepare(), for an already disabled/unprepared clock, leading to
a splat in the log about clocks calls being wrongly balanced and breaking
system sleep.

To still allow the direct_complete path in cases when it's possible, but
also to keep the fix simple, let's runtime resume the i2c device in the
->suspend() callback, before continuing to put the device into low power
state.

Note, in cases when the i2c device is attached to the ACPI PM domain, this
problem doesn't occur, because ACPI's ->suspend() callback, assigned to
acpi_subsys_suspend(), already calls pm_runtime_resume() for the device.

It should also be noted that this change does not fix commit 8503ff1
("i2c: designware: Avoid unnecessary resuming during system suspend").
Because for the non-ACPI case, the system sleep support was already broken
prior that point.

Cc: <[email protected]> # v4.4+
Signed-off-by: Ulf Hansson <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Tested-by: John Stultz <[email protected]>
Tested-by: Jarkko Nikula <[email protected]>
Acked-by: Jarkko Nikula <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -430,7 +430,7 @@ static void dw_i2c_plat_complete(struct device *dev)
 #endif
 
 #ifdef CONFIG_PM
-static int dw_i2c_plat_suspend(struct device *dev)
+static int dw_i2c_plat_runtime_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
@@ -452,11 +452,21 @@ static int dw_i2c_plat_resume(struct device *dev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int dw_i2c_plat_suspend(struct device *dev)
+{
+	pm_runtime_resume(dev);
+	return dw_i2c_plat_runtime_suspend(dev);
+}
+#endif
+
 static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
 	.prepare = dw_i2c_plat_prepare,
 	.complete = dw_i2c_plat_complete,
 	SET_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
-	SET_RUNTIME_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume, NULL)
+	SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend,
+			   dw_i2c_plat_resume,
+			   NULL)
 };
 
 #define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops)