VTracker interface C++ library

v1.4.4

Overview

VTracker C++ library provides standard interface as well defines data structures and rules for different video trackers. VTracker interface class does nothing, just provides interface, defines data structures and provides methods to encode/decode commands and encode/decode params. Different video trackers inherit interface form VTracker C++ class. VTracker.h file contains list of data structures (VTrackerCommand enum, VTrackerParam enum and VTrackerParams class) and VTracker class declaration. VTrackerParams class contains video tracker params and includes methods to encode and decode params. VTrackerCommand enum contains IDs of commands. VTrackerParam enum contains IDs of params. All video trackers should include params and commands listed in VTracker.h file. VTracker interface class depends on Frame class (describes video frame and video frame data structures, source code included, Apache 2.0 license) and ConfigReader library (provides methods to read/write JSON config files, source code included, Apache 2.0 license). It uses C++17 standard. The library is licensed under the Apache 2.0 license.

Versions

Table 1 - Library versions.

Version	Release date	What's new
1.0.0	20.07.2023	First version.
1.1.0	10.08.2023	- Data structures updated.
1.2.0	24.09.2023	- Updated encode(...) and decode(...) methods of VTrackerParams. - Added decodeAndExecuteCommand(...) method. - Added example of video tracker implementation.
1.3.0	26.09.2023	- Signature of getParams(...) method changed.
1.3.1	13.11.2023	- Frame class updated.
1.4.1	13.12.2023	- Virtual destructor added. - Frame class updated.
1.4.2	19.03.2024	- Documentation updated. - Frame class updated. - ConfigReader class updated.
1.4.3	21.05.2024	- Documentation updated. - Submodules updated.
1.4.3	21.05.2024	- Documentation updated. - Submodules updated.
1.4.4	06.07.2024	- CMake updated. - Submodules updated.

Library files

The library supplied by source code only. The user would be given a set of files in the form of a CMake project (repository). The repository structure is shown below:

CMakeLists.txt ------------------ Main CMake file of the library.
3rdparty ------------------------ Folder with third-party libraries.
    CMakeLists.txt -------------- CMake file to include third-party libraries.
    ConfigReader ---------------- Folder with ConfigReader library source code.
    Frame ----------------------- Folder with Frame library source code.
example ------------------------- Folder with custom video tracker class.
    CMakeLists.txt -------------- CMake file for custom video tracker class.
    CustomVTracker.cpp ---------- C++ implementation file.
    CustomVTracker.h ------------ Header with CustomVTracker class declaration.
    CustomVTrackerVersion.h ----- Header file which includes CustomVTracker version.
    CustomVTrackerVersion.h.in -- CMake service file to generate version file.
test ---------------------------- Folder with codec test application.
    CMakeLists.txt -------------- CMake file for codec test application.
    main.cpp -------------------- Source code file of VTracker class test application.
src ----------------------------- Folder with source code of the library.
    CMakeLists.txt -------------- CMake file of the library.
    VTracker.cpp ---------------- C++ implementation file.
    VTracker.h ------------------ Header file which includes VTracker class declaration.
    VTrackerVersion.h ----------- Header file which includes version of the library.
    VTrackerVersion.h.in -------- CMake service file to generate version file.

Required operating principles

The video tracker shall provide the following principle of operation: each video frame without dropping must be send to the tracker for processing regardless of the current tracker operation mode. If the tracker is not in tracking mode, the tracker does not perform frame processing, but the processing function must be called by user. Tracker should calculate at least tracking rectangle position (aka object position) for each processed video frame. Figure 1 shows basic principles of object search on video frames.

Figure 1 - Basic principles of object search. (1 - object image on the current frame, 2 - tracking rectangle calculated after processing of the current frame, 3 - position of the tracking rectangle on the previous frame, 4 - object search window on the current frame relative to the position of the tracking rectangle on the previous frame, 5 - current video frame).

At the moment of object capturing, the rectangular area of the video frame (capture rectangle) specified in the capture parameters (position and size) is taken as the object reference image, on the basis of which the pattern is formed. The algorithm then searches an object in each frame of the video in particular search window. Search window is area bounded by the algorithm's parameters with the center coinciding with the calculated center of the tracking rectangle on the previous video frame (or the center of the capture rectangle if the first frame after capture is being processed, position of search window can be change by user for any video frame). The calculated most probable position of the tracking object (with highest value of correlation function) in the current video frame (calculated center of the tracking rectangle) is taken as the coordinates of the object. Figure 1 shows a schematic representation of a video frame (5) that contains an image of a object (1). Assume that on the previous video frame the object was in the area corresponding to area (3), which is the area of the tracking rectangle (the most probable position of the object) in the previous video frame. The library performs object search in the area (4) whose center coincides with the position of the center of the tracking rectangle (3) in the previous video frame. Tracker should support (if it possible) follow modes.

Table 2 - Tracking algorithm operating modes.

Mode	Description
FREE - free mode.	In this mode, video tracker does not perform any calculations. Video tracker only adds video frames to the frame buffer or drop frame if no frame buffer in particular implementation. Conditions for entering FREE mode: 1. Once the video tracker has been initialized. This mode is the default mode. 2. Automatically when the automatic tracking reset criteria are met. 3. After command RESET.
TRACKING - tracking mode.	In this mode the video tracker calculates the automatic tracking and updates all calculated (estimated) object parameters. Criteria for entering TRACKING mode: 1. After the CAPTURE command. 2. Automatically from LOST mode when object detection criteria are met.
LOST - object loss mode.	In this mode, the video tracker searches object for automatic recapturing (switching to TRACKING mode) and updates it’s coordinates in one of the ways specified in the parameters. LOST mode contains the following additional modes: 0. Tracking rectangle coordinates are not updated (remain the same as before entering LOST mode). 1. The tracking rectangle coordinates are updated based on the components of the object's speed calculated before going into LOST mode. When the tracking rectangle reaches any edge of the frame, the coordinate update in the corresponding direction stops. 2. The tracking rectangle coordinates are updated based on the components of the speed of objects in the video frames calculated before going into LOST mode. When the tracking reset criteria is met, the device switches to FREE mode. Criteria for entering LOST mode: 1. Automatically when object loss is detected. 2. On command from TRACKING mode. 3. On command from INERTIAL mode. 4. On command from STATIC mode.
INERTIAL - inertial tracking mode.	In this mode the video tracker does not search for an object to recapture automatically, but only updates the coordinates of the tracking rectangle based on the previously calculated velocity components of the objects. Criteria for entering INERTIAL mode: 1. On command from TRACKING mode. 2. On command from LOST mode. 3. On command from STATIC mode.
STATIC - static mode.	This mode does not perform any calculations and the tracking rectangle coordinates remain the same as before going into this mode. This mode is necessary to “freeze” the tracking algorithm for a certain number of frames. For example, if the tracking system is exposed to strong vibrations, it is possible to “freeze” the tracking algorithm until the vibration ends.

Figure 2 shows the operating mode graph and the possible transitions between them. The words "Auto" in figure 2 indicate the ability to change the mode automatically if the relevant criteria are met. the words "Command" indicated the ability to change mode by user's command.

Figure 2 - Operation modes of the tracking algorithm. ("Auto" – automatic mode change capability).

Figure 2 shows the graph of operation modes. There are the following conditions for automatic mode changes (word “Auto” in figure 2): 1. Automatic switching from TRACKING to FREE mode is possible only if the tracking rectangle center has touched (coincided in coordinates) any of the video frame edges. 2. The automatic switching from TRACKING to LOST mode is possible when an object loss is detected – when the calculated object detection probability falls below the threshold. 3. Automatic switching from LOST to TRACKING mode is possible when an object is detected again after a loss - when the calculated object detection probability exceeds the threshold. 4. Automatic reset of tracking in the LOST mode (switch to FREE mode) is possible when the center of the tracking rectangle touches the edge of the video frame (if the LOST mode option set to 2), as well as when the number of frames specified in the parameters has expired, at which the algorithm is continuously in LOST mode. 5. Automatic reset of tracking in INERTIAL mode (switch to FREE mode) is possible when the center of the tracking rectangle reaches the edge of the frame.

VTracker class description

VTracker class declaration

VTracker interface class declared in VTracker.h file. Class declaration:

namespace cr
{
namespace vtracker
{
class VTracker
{
public:

    /// Class destructor.
    virtual ~VTracker();

    /// Get string of current library version.
    static std::string getVersion();

    /// Init video tracker.
    virtual bool initVTracker(VTrackerParams& params) = 0;

    /// Set video tracker param.
    virtual bool setParam(VTrackerParam id, float value) = 0;

    /// Get video tracker param value.
    virtual float getParam(VTrackerParam id) = 0;

    /// Get video tracker params (results).
    virtual void getParams(VTrackerParams& params) = 0;

    /// Execute command.
    virtual bool executeCommand(VTrackerCommand id,
                                float arg1 = 0,
                                float arg2 = 0,
                                float arg3 = 0) = 0;

    /// Process frame.
    virtual bool processFrame(cr::video::Frame& frame) = 0;

    /// Get image of internal surfaces.
    virtual void getImage(int type, cr::video::Frame& image) = 0;

    /// Encode set param command.
    static void encodeSetParamCommand(
            uint8_t* data, int& size, VTrackerParam id, float value);

    /// Encode command.
    static void encodeCommand(
            uint8_t* data, int& size, VTrackerCommand id,
            float arg1 = 0, float arg2 = 0, float arg3 = 0);

    /// Decode command.
    static int decodeCommand(uint8_t* data,
                             int size,
                             VTrackerParam& paramId,
                             VTrackerCommand& commandId,
                             float& value1,
                             float& value2,
                             float& value3);

    /// Decode and execute command.
    virtual bool decodeAndExecuteCommand(uint8_t* data, int size) = 0;
};
}
}

getVersion method

The getVersion() method returns string of current version of VTracker class. Particular video tracker can have it's own getVersion() method. Method declaration:

static std::string getVersion();

Method can be used without VTracker class instance:

cout << "VTracker class version: " << VTracker::getVersion() << endl;

Console output:

VTracker class version: 1.4.4

initVTracker method

The initVTracker(...) method initializes video tracker by set of parameters. Method declaration:

virtual bool initVTracker(VTrackerParams& params) = 0;

Parameter	Value
params	Video tracker params class. Video tracker should initialize all parameters listed in VTrackerParams class.

Returns: TRUE if the video tracker initialized or FALSE if not.

setParam method

The setParam(...) method sets new video tracker parameter value. The particular implementation of the video tracker must provide thread-safe setParam(...) method call. This means that the setParam(...) method can be safely called from any thread. Method declaration:

virtual bool setParam(VTrackerParam id, float value) = 0;

Parameter	Description
id	Parameter ID according to VTrackerParam enum.
value	Parameter value. Value depends on parameter ID.

Returns: TRUE if the parameter was set or FALSE if not.

getParam method

The getParam(...) method returns video tracker parameter value. The particular implementation of the video tracker must provide thread-safe getParam(...) method call. This means that the getParam(...) method can be safely called from any thread. Method declaration:

virtual float getParam(VTrackerParam id) = 0;

Parameter	Description
id	Parameter ID according to VTrackerParam enum.

Returns: parameter value or -1 of the parameters doesn't exist in particular video tracker.

getParams method

The getParams(...) method returns video tracker params class and tracking results. The particular implementation of the video tracker must provide thread-safe getParams(...) method call. This means that the getParams(...) method can be safely called from any thread. Method declaration:

virtual void getParams(VTrackerParams& params) = 0;

Parameter	Description
params	Video tracker parameters class object (VTrackerParams object).

executeCommand method

The executeCommand(...) method executes video tracker command. The particular implementation of the video tracker must provide thread-safe executeCommand(...) method call. This means that the executeCommand(...) method can be safely called from any thread. Method declaration:

virtual bool executeCommand(VTrackerCommand id, float arg1 = 0, float arg2 = 0, float arg3 = 0) = 0;

Parameter	Description
id	Command ID according to VTrackerCommand enum.
arg1	First argument. Value depends on command ID (see VTrackerCommand enum description).
arg2	Second argument. Value depends on command ID (see VTrackerCommand enum description).
arg3	Third argument. Value depends on command ID (see VTrackerCommand enum description).

Returns: TRUE is the command was executed or FALSE if not.

processFrame method

The processFrame(...) method processes video frame. Method declaration:

virtual bool processFrame(cr::video::Frame& frame) = 0;

Parameter	Description
frame	Video frame for processing. Video tracker processes only RAW pixel formats (BGR24, RGB24, GRAY, YUYV24, YUYV, UYVY, NV12, NV21, YV12, YU12, see Frame class description). Video trackers should implement all RAW pixel format listed above.

Returns: TRUE is the video frame was processed FALSE if not. If video tracker not in tracking mode the method should return TRUE.

getImage method

The getImage(...) method designed to obtain images of internal matrixes. Depends on implementation. Method declaration:

virtual void getImage(int type, cr::video::Frame& image) = 0;

Parameter	Description
type	Image type. Depends on implementation.
frame	Output frame (see Frame class description). Pixel format depends on implementation.

encodeSetParamCommand method

The encodeSetParamCommand(...) static method designed to encode command to change any parameter in remote video tracker. To control video tracker remotely, the developer has to design his own protocol and according to it encode the command and deliver it over the communication channel. To simplify this, the VTracker class contains static methods for encoding the control command. The VTracker class provides two types of commands: a parameter change command (SET_PARAM) and an action command (COMMAND). encodeSetParamCommand(...) designed to encode SET_PARAM command. Method declaration:

static void encodeSetParamCommand(uint8_t* data, int& size, VTrackerParam id, float value);

Parameter	Description
data	Pointer to data buffer for encoded command. Must have size >= 11.
size	Size of encoded data. Will be 11 bytes.
id	Parameter ID according to VTrackerParam enum.
value	Parameter value. Value depends on parameter ID (see VTrackerParam enum description).

encodeSetParamCommand(...) is static and used without VTracker class instance. This method used on client side (control system). Command encoding example:

outValue = (float)(rand() % 20);
VTracker::encodeSetParamCommand(
data, size, VTrackerParam::MULTIPLE_THREADS, outValue);

encodeCommand method

The encodeCommand(...) static method designed to encode command for remote video tracker. To control video tracker remotely, the developer has to design his own protocol and according to it encode the command and deliver it over the communication channel. To simplify this, the VTracker class contains static methods for encoding the control command. The VTracker class provides two types of commands: a parameter change command (SET_PARAM) and an action command (COMMAND). encodeCommand(...) designed to encode COMMAND (action command). Method declaration:

static void encodeCommand(uint8_t* data, int& size, VTrackerCommand id, float arg1 = 0, float arg2 = 0, float arg3 = 0);

Parameter	Description
data	Pointer to data buffer for encoded command. Must have size >= 19.
size	Size of encoded data. Will be 19 bytes.
id	Command ID according to VTrackerCommand enum.
arg1	First argument. Value depends on command ID (see VTrackerCommand enum description).
arg2	Second argument. Value depends on command ID (see VTrackerCommand enum description).
arg3	Third argument. Value depends on command ID (see VTrackerCommand enum description).

encodeCommand(...) is static and used without VTracker class instance. This method used on client side (control system). Command encoding example:

uint8_t data[1024];
int size = 0;
float outValue = (float)(rand() % 20);
float arg1 = (float)(rand() % 20);
float arg2 = (float)(rand() % 20);
float arg3 = (float)(rand() % 20);
VTracker::encodeCommand(data, size, VTrackerCommand::CAPTURE, arg1, arg2, arg3);

decodeCommand method

The decodeCommand(...) static method designed to decode command on video tracker side (edge device) which encoded by encodeSetParamCommand(...) or encodeCommand(...) methods. Method declaration:

static int decodeCommand(uint8_t* data, int size, VTrackerParam& paramId, VTrackerCommand& commandId, float& value1, float& value2, float& value3);

Parameter	Description
data	Pointer to input command.
size	Size of command. Should be 11 bytes for SET_PARAM or 19 bytes for COMMAND.
paramId	Parameter ID according to VTrackerParam enum. After decoding SET_PARAM command the method will return parameter ID.
commandId	Command ID according to VTrackerCommand enum. After decoding COMMAND the method will return command ID.
value1	Parameter value or first command argument 1. After decoding SET_PARAM and COMMAND.
value2	Parameter value or second command argument 1. After decoding COMMAND.
value3	Parameter value or third command argument 1. After decoding COMMAND.

Returns: 0 - in case decoding COMMAND, 1 - in case decoding SET_PARAM command or -1 in case errors.

decodeCommand(...) is static and used without VTracker class instance. Command decoding example:

// Encode command.
uint8_t data[1024];
int size = 0;
float outValue = (float)(rand() % 20);
float arg1 = (float)(rand() % 20);
float arg2 = (float)(rand() % 20);
float arg3 = (float)(rand() % 20);
VTracker::encodeCommand(data, size, VTrackerCommand::CAPTURE, arg1, arg2, arg3);

// Decode command.
VTrackerCommand commandId;
VTrackerParam paramId;
float inArg1 = (float)(rand() % 20);
float inArg2 = (float)(rand() % 20);
float inArg3 = (float)(rand() % 20);
if (VTracker::decodeCommand(data, size, paramId, commandId, inArg1, inArg2, inArg3) != 0)
{
    cout << "Command not decoded" << endl;
    return false;
}

decodeAndExecuteCommand method

The decodeAndExecuteCommand(...) method decodes and executes command on video tracker side. The particular implementation of the video tracker must provide thread-safe decodeAndExecuteCommand(...) method call. This means that the decodeAndExecuteCommand(...) method can be safely called from any thread. Method declaration:

virtual bool decodeAndExecuteCommand(uint8_t* data, int size) = 0;

Parameter	Description
data	Pointer to input command.
size	Size of command. Must be 11 bytes for SET_PARAM or 19 bytes for COMMAND.

Returns: TRUE if command decoded (SET_PARAM or COMMAND) and executed (action command or set param command).

Data structures

VTrackerCommand enum

VTrackerCommand enum describes commands supported by video tracker. VTrackerCommand enum declared in VTracker.h file. Enum declaration:

enum class VTrackerCommand
{
    /// Object capture. Arguments:
    /// arg1 - Capture rectangle center X coordinate. -1 - default coordinate.
    /// arg2 - Capture rectangle center Y coordinate. -1 - default coordinate.
    /// arg3 - frame ID. -1 - Capture on last frame.
    CAPTURE = 1,
    /// Object capture command. Arguments:
    /// arg1 - Capture rectangle center X coordinate, percents of frame width.
    /// arg2 - Capture rectangle center Y coordinate, percents of frame width.
    CAPTURE_PERCENTS,
    /// Reset command. No arguments.
    RESET,
    /// Set INERTIAL mode. No arguments.
    SET_INERTIAL_MODE,
    /// Set LOST mode. No arguments.
    SET_LOST_MODE,
    /// Set STATIC mode. No arguments.
    SET_STATIC_MODE,
    /// Adjust tracking rectangle size automatically once. No arguments.
    ADJUST_RECT_SIZE,
    /// Adjust tracking rectangle position automatically once. No arguments.
    ADJUST_RECT_POSITION,
    /// Move tracking rectangle (change position). Arguments:
    /// arg1 - add to X coordinate, pixels. 0 - no change.
    /// arg2 - add to Y coordinate, pixels. 0 - no change.
    MOVE_RECT,
    /// Set tracking rectangle position in FREE mode. Arguments:
    /// arg1 - Rectangle center X coordinate.
    /// arg2 - Rectangle center Y coordinate.
    SET_RECT_POSITION,
    /// Set tracking rectangle position in FREE mode in percents of frame size.
    /// Arguments:
    /// arg1 - Rectangle center X coordinate, percents of frame width.
    /// arg2 - Rectangle center X coordinate, percents of frame height.
    SET_RECT_POSITION_PERCENTS,
    /// Move search window (change position). Arguments:
    /// arg1 - add to X coordinate, pixels. 0 - no change.
    /// arg2 - add to Y coordinate, pixels. 0 - no change.
    MOVE_SEARCH_WINDOW,
    /// Set search window position. Arguments:
    /// arg1 - Search window center X coordinate.
    /// arg2 - Search window center Y coordinate.
    SET_SEARCH_WINDOW_POSITION,
    /// Set search window position in percents of frame size. Arguments:
    /// arg1 - Search window center X coordinate, percents of frame width.
    /// arg2 - Search window center X coordinate, percents of frame height.
    SET_SEARCH_WINDOW_POSITION_PERCENTS,
    /// Change tracking rectangle size. Arguments:
    /// arg1 - horizontal size add, pixels.
    /// arg2 - vertical size add, pixels.
    CHANGE_RECT_SIZE
};

Table 3 - Video tracker commands description. Some commands maybe unsupported by particular video tracker class. Recommended arguments for executeCommand(...) and encodeCommand(...).

Command	Description
CAPTURE	Object capture. Arguments: arg1 - Capture rectangle center X coordinate. -1 - default coordinate, arg2 - Capture rectangle center Y coordinate. -1 - default coordinate, arg3 - frame ID. -1 - Capture on last frame.
CAPTURE_PERCENTS	Object capture command. Arguments: arg1 - Capture rectangle center X coordinate, percents of frame width, arg2 - Capture rectangle center Y coordinate, percents of frame width.
RESET	Reset command. No arguments.
SET_INERTIAL_MODE	Set INERTIAL mode. No arguments.
SET_LOST_MODE	Set LOST mode. No arguments.
SET_STATIC_MODE	Set STATIC mode. No arguments.
ADJUST_RECT_SIZE	Adjust tracking rectangle size automatically once. No arguments.
ADJUST_RECT_POSITION	Adjust tracking rectangle position automatically once. No arguments.
MOVE_RECT	Move tracking rectangle (change position). Arguments: arg1 - add to X coordinate, pixels. 0 - no change, arg2 - add to Y coordinate, pixels. 0 - no change.
SET_RECT_POSITION	Set tracking rectangle position in FREE mode. Arguments: arg1 - Rectangle center X coordinate, arg2 - Rectangle center Y coordinate.
SET_RECT_POSITION_PERCENTS	Set tracking rectangle position in FREE mode in percents of frame size. Arguments: arg1 - Rectangle center X coordinate, percents of frame width, arg2 - Rectangle center X coordinate, percents of frame height.
MOVE_SEARCH_WINDOW	Move search window (change position). Arguments: arg1 - add to X coordinate, pixels. 0 - no change, arg2 - add to Y coordinate, pixels. 0 - no change.
SET_SEARCH_WINDOW_POSITION	Set search window position. Arguments: arg1 - Search window center X coordinate, arg2 - Search window center Y coordinate.
SET_SEARCH_WINDOW_POSITION_PERCENTS	Set search window position in percents of frame size. Arguments: arg1 - Search window center X coordinate, percents of frame width, arg2 - Search window center X coordinate, percents of frame height.
CHANGE_RECT_SIZE	Change tracking rectangle size. Arguments: arg1 - horizontal size add, pixels, arg2 - vertical size add, pixels.

VTrackerParam enum

VTrackerParam enum describes parameters supported by video tracker. VTrackerParam enum declared in VTracker.h file. Enum declaration:

enum class VTrackerParam
{
    /// Width of search window, pixels. Set by user.
    SEARCH_WINDOW_WIDTH = 1,
    /// Height of search window, pixels. Set by user.
    SEARCH_WINDOW_HEIGHT,
    /// Tracking rectangle width, pixels. Set by user or can be changed by
    /// tracking algorithm if rectAutoSize == true.
    RECT_WIDTH,
    /// Tracking rectangle height, pixels. Set by user or can be changed by
    /// tracking algorithm if rectAutoSize == true.
    RECT_HEIGHT,
    /// Option for LOST mode. Parameter that defines the behavior of the
    /// tracking  algorithm in LOST mode. Default is 0. Possible values:
    /// 0. In LOST mode, the coordinates of the center of the  tracking
    ///    rectangle are not updated and remain the  same as before entering
    ///    LOST mode.
    /// 1. The coordinates of the center of the tracking  rectangle are updated
    ///    based on the components  of the object’s speed calculated before
    ///    going into  LOST mode. If the tracking rectangle “touches” the  edge
    ///    of the video frame, the coordinate updating  for this component
    ///    (horizontal or vertical) will stop.
    /// 2. The coordinates of the center of the tracking  rectangle are
    ///    updated based on the components  of the object’s speed calculated
    ///    before going into  LOST mode. The tracking is reset if the center of 
    ///    the tracking rectangle touches any of the edges of  the video frame.
    LOST_MODE_OPTION,
    /// Size of frame buffer (number of frames to store). Set by user.
    FRAME_BUFFER_SIZE,
    /// Maximum number of frames in LOST mode to auto reset of algorithm. Set
    /// by user.
    MAX_FRAMES_IN_LOST_MODE,
    /// Use tracking rectangle auto size flag: 0 - no use, 1 - use. Set by user.
    RECT_AUTO_SIZE,
    /// Use tracking rectangle auto position: 0 - no use, 1 - use. Set by user.
    RECT_AUTO_POSITION,
    /// Use multiple threads for calculations. 0 - one thread, 1 - multiple. Set
    /// by user.
    MULTIPLE_THREADS,
    /// Number of channels for processing. E.g., number of color channels. Set
    /// by user.
    NUM_CHANNELS,
    /// Tracker type. Depends on implementation. Set by user.
    TYPE,
    /// Custom parameter. Depends on implementation.
    CUSTOM_1,
    /// Custom parameter. Depends on implementation.
    CUSTOM_2,
    /// Custom parameter. Depends on implementation.
    CUSTOM_3
};

Table 4 - Video tracker params description. Some params maybe unsupported by particular video tracker.

Parameter	Access	Description
SEARCH_WINDOW_WIDTH	read / write	Width of search window, pixels. Set by user. (see Required operating principles).
SEARCH_WINDOW_HEIGHT	read / write	Height of search window, pixels. Set by user. (see Required operating principles).
RECT_WIDTH	read / write	Tracking rectangle width, pixels. (see Required operating principles). Set by user or can be changed by tracking algorithm if RECT_AUTO_SIZE == 1.
RECT_HEIGHT	read / write	Tracking rectangle height, pixels (see Required operating principles). Set by user or can be changed by tracking algorithm if RECT_AUTO_SIZE == 1.
LOST_MODE_OPTION	read / write	Option for LOST mode. Parameter that defines the behavior of the tracking algorithm in LOST mode. Default is 0. Possible values: 0. In LOST mode, the coordinates of the center of the tracking rectangle are not updated and remain the same as before entering LOST mode. 1. The coordinates of the center of the tracking rectangle are updated based on the components of the object’s speed calculated before going into LOST mode. If the tracking rectangle “touches” the edge of the video frame, the coordinate updating for this component (horizontal or vertical) will stop. 2. The coordinates of the center of the tracking rectangle are updated based on the components of the object’s speed calculated before going into LOST mode. The tracking is reset if the center of the tracking rectangle touches any of the edges of the video frame.
FRAME_BUFFER_SIZE	read / write	Size of frame buffer (number of frames to store). Set by user.
MAX_FRAMES_IN_LOST_MODE	read / write	Maximum number of frames in LOST mode to auto reset of algorithm. Set by user.
RECT_AUTO_SIZE	read / write	Use tracking rectangle auto size flag: 0 - no use, 1 - use. Set by user.
RECT_AUTO_POSITION	read / write	Use tracking rectangle auto position: 0 - no use, 1 - use. Set by user.
MULTIPLE_THREADS	read / write	Use multiple threads for calculations. 0 - one thread, 1 - multiple. Set by user.
NUM_CHANNELS	read / write	Number of channels for processing. E.g., number of color channels. Set by user.
TYPE	read / write	Tracker type. Depends on implementation. Set by user.
CUSTOM_1	read / write	Custom parameter. Depends on implementation.
CUSTOM_2	read / write	Custom parameter. Depends on implementation.
CUSTOM_3	read / write	Custom parameter. Depends on implementation.

VTrackerParams class description

VTrackerParams class declaration

VTrackerParams class used for video tracker initialization (initVTracker(...) method) or to get all actual params and tracking results (getParams() method). Also VTrackerParams provide structure to write/read params from JSON files (JSON_READABLE macro, see ConfigReader class description) and provides methods to encode and decode params. Class declaration:

class VTrackerParams
{
public:
    /// Tracker mode index: 0 - FREE, 1 - TRACKING, 2 - INERTIAL, 3 - STATIC.
    /// Set by video tracker according to processing results or after command
    /// execution.
    int mode{0};
    /// Tracking rectangle horizontal center position. Calculated by tracking
    /// algorithm.
    int rectX{0};
    /// Tracking rectangle vertical center position. Calculated by tracking
    /// algorithm.
    int rectY{0};
    /// Tracking rectangle width, pixels. Set by user or can be changed by
    /// tracking algorithm if rectAutoSize == true.
    int rectWidth{72};
    /// Tracking rectangle height, pixels. Set by user or can be changed by
    /// tracking algorithm if rectAutoSize == true.
    int rectHeight{72};
    /// Estimated horizontal position of object center, pixels. Calculated by
    /// video tracker.
    int objectX{0};
    /// Estimated vertical position of object center, pixels.Calculated by
    /// video tracker.
    int objectY{0};
    /// Estimated object width, pixels. Calculated by video tracker.
    int objectWidth{72};
    /// Estimated object height, pixels. Calculated by video tracker.
    int objectHeight{72};
    /// Frame counter in LOST mode. After switching in LOST mode the video
    /// tracker start counting from 0. After switching to another mode from
    /// LOST mode the video tracker will reset this counter.
    int lostModeFrameCounter{0};
    /// Counter for processed frames after capture object. After reset tracking
    /// the video tracker will reset counter.
    int frameCounter{0};
    /// Width of processed video frame. Set by video tracker after processing
    /// first video frame.
    int frameWidth{0};
    /// Height of processed video frame. Set by video tracker after processing
    /// first video frame.
    int frameHeight{0};
    /// Width of search window, pixels. Set by user.
    int searchWindowWidth{256};
    /// Height of search window, pixels. Set by user.
    int searchWindowHeight{256};
    /// Horizontal position of search window center. This position will be used
    /// for next video frame. Usually it coincides with data tracking rectangle
    /// center but can be set by user to move search window for new video frame.
    int searchWindowX{0};
    /// Vertical position of search window center. This position will be used
    /// for next video frame. Usually it coincides with data tracking rectangle
    /// center but can be set by user to move search window for new video frame.
    int searchWindowY{0};
    /// Option for LOST mode. Parameter that defines the behavior of the
    /// tracking  algorithm in LOST mode. Default is 0. Possible values:
    /// 0. In LOST mode, the coordinates of the center of the  tracking
    ///    rectangle are not updated and remain the  same as before entering
    ///    LOST mode.
    /// 1. The coordinates of the center of the tracking  rectangle are updated
    ///    based on the components  of the object’s speed calculated before
    ///    going into  LOST mode. If the tracking rectangle “touches” the  edge
    ///    of the video frame, the coordinate updating  for this component
    ///    (horizontal or vertical) will stop.
    /// 2. The coordinates of the center of the tracking  rectangle are
    ///    updated based on the components  of the object’s speed calculated
    ///    before going into  LOST mode. The tracking is reset if the center of 
    ///    the tracking rectangle touches any of the edges of  the video frame.
    int lostModeOption{0};
    /// Size of frame buffer (number of frames to store). Set by user.
    int frameBufferSize{128};
    /// Maximum number of frames in LOST mode to auto reset of algorithm. Set
    /// by user.
    int maxFramesInLostMode{128};
    /// ID of last processed frame in frame buffer. Set by video tracker.
    int processedFrameId{0};
    /// ID of last added frame to frame buffer. Set by video tracker.
    int frameId{0};
    /// Horizontal velocity of object on video frames (pixel/frame). Calculated
    /// by video tracker.
    float velX{0.0f};
    /// Vertical velocity of object on video frames (pixel/frame). Calculated
    /// by video tracker. 
    float velY{0.0f};
    /// Estimated probability of object detection. Calculated by video tracker.
    float detectionProbability{0.0f};
    /// Use tracking rectangle auto size flag: false - no use, true - use. Set
    /// by user.
    bool rectAutoSize{false};
    /// Use tracking rectangle auto position: false - no use, true - use. Set
    /// by user.
    bool rectAutoPosition{false};
    /// Use multiple threads for calculations. Set by user.
    bool multipleThreads{false};
    /// Number of channels for processing. E.g., number of color channels. Set
    /// by user.
    int numChannels{3};
    /// Tracker type. Depends on implementation. Set by user.
    int type{0};
    /// Processing time for last frame, mks. Calculated by video tracker.
    int processingTimeMks{0};
    /// Custom parameter. Depends on implementation.
    float custom1{0.0f};
    /// Custom parameter. Depends on implementation.
    float custom2{0.0f};
    /// Custom parameter. Depends on implementation.
    float custom3{0.0f};

    JSON_READABLE(VTrackerParams, rectWidth, rectHeight, searchWindowWidth,
                  searchWindowHeight, lostModeOption, frameBufferSize,
                  maxFramesInLostMode, rectAutoSize, rectAutoPosition,
                  multipleThreads, numChannels, type, custom1, custom2, custom3);

    /// operator =
    VTrackerParams& operator= (const VTrackerParams& src);

    /// Encode params.
    bool encode(uint8_t* data, int bufferSize,
                int& size, VTrackerParamsMask* mask = nullptr);

    /// Decode params.
    bool decode(uint8_t* data, int dataSize);
};

Table 5 - VTrackerParams class fields description.

Field	Type	Description
mode	int	Tracker mode index: 0 - FREE, 1 - TRACKING, 2 - INERTIAL, 3 - STATIC. Set by video tracker according to processing results or after command execution.
rectX	int	Tracking rectangle horizontal center position, pixels. Calculated by tracking algorithm.
rectY	int	Tracking rectangle vertical center position, pixels. Calculated by tracking algorithm.
rectWidth	int	Tracking rectangle width, pixels. Set by user or can be changed by tracking algorithm if rectAutoSize == true.
rectHeight	int	Tracking rectangle height, pixels. Set by user or can be changed by tracking algorithm if rectAutoSize == true.
objectX	int	Estimated horizontal position of object center, pixels. Calculated by video tracker.
objectY	int	Estimated vertical position of object center, pixels. Calculated by video tracker.
objectWidth	int	Estimated object width, pixels. Calculated by video tracker.
objectHeight	int	Estimated object height, pixels. Calculated by video tracker.
lostModeFrameCounter	int	Frame counter in LOST mode. After switching in LOST mode the video tracker start counting from 0. After switching to another mode from LOST mode the video tracker will reset this counter.
frameCounter	int	Counter for processed frames after capture object. After reset tracking the video tracker will reset counter.
frameWidth	int	Width of processed video frame. Set by video tracker after processing first video frame.
frameHeight	int	Height of processed video frame. Set by video tracker after processing first video frame.
searchWindowWidth	int	Width of search window, pixels. Set by user.
searchWindowHeight	int	Height of search window, pixels. Set by user.
searchWindowX	int	Horizontal position of search window center. This position will be used for next video frame. Usually it coincides with data tracking rectangle center but can be set by user to move search window for new video frame.
searchWindowY	int	Vertical position of search window center. This position will be used for next video frame. Usually it coincides with data tracking rectangle center but can be set by user to move search window for new video frame.
lostModeOption	int	Option for LOST mode. Parameter that defines the behavior of the tracking algorithm in LOST mode. Default is 0. Possible values: 0. In LOST mode, the coordinates of the center of the tracking rectangle are not updated and remain the same as before entering LOST mode. 1. The coordinates of the center of the tracking rectangle are updated based on the components of the object’s speed calculated before going into LOST mode. If the tracking rectangle “touches” the edge of the video frame, the coordinate updating for this component (horizontal or vertical) will stop. 2. The coordinates of the center of the tracking rectangle are updated based on the components of the object’s speed calculated before going into LOST mode. The tracking is reset if the center of the tracking rectangle touches any of the edges of the video frame.
frameBufferSize	int	Size of frame buffer (number of frames to store). Set by user.
maxFramesInLostMode	int	Maximum number of frames in LOST mode to auto reset of algorithm. Set by user.
processedFrameId	int	ID of last processed frame in frame buffer. Set by video tracker.
frameId	int	ID of last added frame to frame buffer. Set by video tracker.
velX	float	Horizontal velocity of object on video frames (pixel/frame). Calculated by video tracker.
velY	float	Vertical velocity of object on video frames (pixel/frame). Calculated by video tracker.
detectionProbability	float	Estimated probability of object detection. Calculated by video tracker.
rectAutoSize	bool	Use tracking rectangle auto size flag: false - no use, true - use. Set by user.
rectAutoPosition	bool	Use tracking rectangle auto position: false - no use, true - use. Set by user.
multipleThreads	bool	Use multiple threads for calculations. Set by user.
numChannels	int	Number of channels for processing. E.g., number of color channels. Set by user.
type	int	Tracker type. Depends on implementation. Set by user.
processingTimeMks	int	Processing time for last frame, mks. Calculated by video tracker.
custom1	float	Custom parameter. Depends on implementation.
custom2	float	Custom parameter. Depends on implementation.
custom3	float	Custom parameter. Depends on implementation.

Serialize video tracker params

VTrackerParams class provides method encode(...) to serialize video tracker params (fields of VTrackerParams class, see Table 5). Serialization of params necessary in case when you need to send params via communication channels. Method provides options to exclude particular parameters from serialization. To do this method inserts binary mask (5 bytes) where each bit represents particular parameter and decode(...) method recognizes it. Method doesn't encode initString. Method declaration:

bool encode(uint8_t* data, int bufferSize, int& size, VTrackerParamsMask* mask = nullptr);

Parameter	Value
data	Pointer to data buffer. Buffer size should be at least 135 bytes.
bufferSize	Data buffer size. Buffer size should be at least 135 bytes.
size	Size of encoded data.
mask	Parameters mask - pointer to VrackerParamsMask structure. VTrackerParamsMask (declared in VTracker.h file) determines flags for each field (parameter) declared in VTrackerParams class. If the user wants to exclude any parameters from serialization, he can put a pointer to the mask. If the user wants to exclude a particular parameter from serialization, he should set the corresponding flag in the VTrackerParamsMask structure.

VTrackerParamsMask structure declaration:

typedef struct VTrackerParamsMask
{
    bool mode{true};
    bool rectX{true};
    bool rectY{true};
    bool rectWidth{true};
    bool rectHeight{true};
    bool objectX{true};
    bool objectY{true};
    bool objectWidth{true};
    bool objectHeight{true};
    bool lostModeFrameCounter{true};
    bool frameCounter{true};
    bool frameWidth{true};
    bool frameHeight{true};
    bool searchWindowWidth{true};
    bool searchWindowHeight{true};
    bool searchWindowX{true};
    bool searchWindowY{true};
    bool lostModeOption{true};
    bool frameBufferSize{true};
    bool maxFramesInLostMode{true};
    bool processedFrameId{true};
    bool frameId{true};
    bool velX{true};
    bool velY{true};
    bool detectionProbability{true};
    bool rectAutoSize{true};
    bool rectAutoPosition{true};
    bool multipleThreads{true};
    bool numChannels{true};
    bool type{true};
    bool processingTimeMks{true};
    bool custom1{true};
    bool custom2{true};
    bool custom3{true};
} VTrackerParamsMask;

Example without parameters mask:

// Prepare random parameters.
VTrackerParams in;
in.mode = rand() % 255;
in.rectX = rand() % 255;
in.rectY = rand() % 255;

// Encode data.
uint8_t data[1024];
int size = 0;
in.encode(data, 1024, size);
cout << "Encoded data size: " << size << " bytes" << endl;

Example with parameters mask:

// Prepare random parameters.
VTrackerParams in;
in.mode = rand() % 255;
in.rectX = rand() % 255;
in.rectY = rand() % 255;

// Prepare mask.
VTrackerParamsMask mask;
mask.mode = true;
mask.rectX = false;
mask.rectY = true;

// Encode data.
uint8_t data[1024];
int size = 0;
in.encode(data, 1024, size, &mask);
cout << "Encoded data size: " << size << " bytes" << endl;

Deserialize video tracker params

VTrackerParams class provides method decode(...) to deserialize params (fields of VTrackerParams class, see Table 5). Deserialization of params necessary in case when you need to receive params via communication channels. Method automatically recognizes which parameters were serialized by encode(...) method. Method declaration:

bool decode(uint8_t* data, int dataSize);

Parameter	Value
data	Pointer to encode data buffer.

Returns: TRUE if data decoded (deserialized) or FALSE if not.

Example:

// Prepare random parameters.
VTrackerParams in;
in.mode = rand() % 255;
in.rectX = rand() % 255;
in.rectY = rand() % 255;

// Encode data.
uint8_t data[1024];
int size = 0;
in.encode(data, 1024, size);
cout << "Encoded data size: " << size << " bytes" << endl;

// Decode data.
VTrackerParams out;
if (!out.decode(data, size))
{
    cout << "Can't decode data" << endl;
    return false;
}

Read params from JSON file and write to JSON file

VTracker library depends on ConfigReader library which provides methods to read parameters from a JSON file and to write parameters to a JSON file. Example of writing to and reading from a JSON file:

// Prepare random parameters.
VTrackerParams in;
in.mode = rand() % 255;
in.rectX = rand() % 255;
in.rectY = rand() % 255;

// Write parameters to the file.
cr::utils::ConfigReader inConfig;
inConfig.set(in, "VTrackerParams");
inConfig.writeToFile("VTrackerParams.json");

// Read parameters from the file.
cr::utils::ConfigReader outConfig;
if(!outConfig.readFromFile("VTrackerParams.json"))
{
    cout << "Can't open config file" << endl;
    return false;
}

// Obtain parameters from the config reader.
VTrackerParams out;
if(!outConfig.get(out, "VTrackerParams"))
{
    cout << "Can't read params from file" << endl;
    return false;
}

VTrackerParams.json will look like:

{
    "VTrackerParams": {
        "custom1": 155.0,
        "custom2": 239.0,
        "custom3": 79.0,
        "frameBufferSize": 130,
        "lostModeOption": 65,
        "maxFramesInLostMode": 111,
        "multipleThreads": true,
        "numChannels": 47,
        "rectAutoPosition": true,
        "rectAutoSize": true,
        "rectHeight": 18,
        "rectWidth": 2,
        "searchWindowHeight": 19,
        "searchWindowWidth": 195,
        "type": 213
    }
}

Build and connect to your project

Typical commands to build VTracker library:

git clone https://github.com/ConstantRobotics-Ltd/VTracker.git
cd VTracker
git submodule update --init --recursive
mkdir build
cd build
cmake ..
make

If you want connect VTracker library to your CMake project as source code you can make follow. For example, if your repository has structure:

CMakeLists.txt
src
    CMakeList.txt
    yourLib.h
    yourLib.cpp

You can add repository VTracker as submodule by commands:

cd <your repository folder>
git submodule add https://github.com/ConstantRobotics-Ltd/VTracker.git 3rdparty/VTracker
git submodule update --init --recursive

In you repository folder will be created folder 3rdparty/VTracker which contains files of VTracker repository with sub-repositories Frame and ConfigReader. New structure of your repository:

CMakeLists.txt
src
    CMakeList.txt
    yourLib.h
    yourLib.cpp
3rdparty
    VTracker

Create CMakeLists.txt file in 3rdparty folder. CMakeLists.txt should contain:

cmake_minimum_required(VERSION 3.13)

################################################################################
## 3RD-PARTY
## dependencies for the project
################################################################################
project(3rdparty LANGUAGES CXX)

################################################################################
## SETTINGS
## basic 3rd-party settings before use
################################################################################
# To inherit the top-level architecture when the project is used as a submodule.
SET(PARENT ${PARENT}_YOUR_PROJECT_3RDPARTY)
# Disable self-overwriting of parameters inside included subdirectories.
SET(${PARENT}_SUBMODULE_CACHE_OVERWRITE OFF CACHE BOOL "" FORCE)

################################################################################
## CONFIGURATION
## 3rd-party submodules configuration
################################################################################
SET(${PARENT}_SUBMODULE_VTRACKER                        ON  CACHE BOOL "" FORCE)
if (${PARENT}_SUBMODULE_VTRACKER)
    SET(${PARENT}_VTRACKER                              ON  CACHE BOOL "" FORCE)
    SET(${PARENT}_VTRACKER_TEST                         OFF CACHE BOOL "" FORCE)
    SET(${PARENT}_VTRACKER_EXAMPLE                      OFF CACHE BOOL "" FORCE)
endif()

################################################################################
## INCLUDING SUBDIRECTORIES
## Adding subdirectories according to the 3rd-party configuration
################################################################################
if (${PARENT}_SUBMODULE_VTRACKER)
    add_subdirectory(VTracker)
endif()

File 3rdparty/CMakeLists.txt adds folder VTracker to your project and excludes test application (VTracker class test applications) from compiling (by default test application and example excluded from compiling if VTracker included as sub-repository). Your repository new structure will be:

CMakeLists.txt
src
    CMakeList.txt
    yourLib.h
    yourLib.cpp
3rdparty
    CMakeLists.txt
    VTracker

Next you need include folder 3rdparty in main CMakeLists.txt file of your repository. Add string at the end of your main CMakeLists.txt:

add_subdirectory(3rdparty)

Next you have to include VTracker library in your src/CMakeLists.txt file:

target_link_libraries(${PROJECT_NAME} VTracker)

Done!

How to make custom implementation

The VTracker class provides only an interface, data structures, and methods for encoding and decoding commands and params. To create your own implementation of the video tracker, you must include the VTracker repository in your project (see Build and connect to your project section). The catalogue example (see Library files section) includes an example of the design of the custom video tracker. You must implement all the methods of the VTracker interface class. Custom video tracker class declaration:

class CustomVTracker: public VTracker
{
public:

    /// Class constructor.
    CustomVTracker();

    /// Class destructor.
    ~CustomVTracker();

    /// Get string of current library version.
    static std::string getVersion();

    /// Init video tracker.
    bool initVTracker(VTrackerParams& params);

    /// Set video tracker param.
    bool setParam(VTrackerParam id, float value);

    /// Get video tracker param value.
    float getParam(VTrackerParam id);

    /// Get video tracker params (results).
    void getParams(VTrackerParams& params);

    /// Execute command.
    bool executeCommand(VTrackerCommand id,
                                float arg1 = 0,
                                float arg2 = 0,
                                float arg3 = 0);

    /// Process frame.
    bool processFrame(cr::video::Frame& frame);

    /// Get image of internal surfaces.
    void getImage(int type, cr::video::Frame& image);

public:

    /// Video tracker params (default params).
    VTrackerParams m_params;
};

Name		Name	Last commit message	Last commit date
Latest commit History 30 Commits
3rdparty		3rdparty
example		example
src		src
static		static
test		test
.gitignore		.gitignore
.gitmodules		.gitmodules
CMakeLists.txt		CMakeLists.txt
LICENSE		LICENSE
README.md		README.md

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

VTracker interface C++ library

Table of contents

Overview

Versions

Library files

Required operating principles

VTracker class description

VTracker class declaration

getVersion method

initVTracker method

setParam method

getParam method

getParams method

executeCommand method

processFrame method

getImage method

encodeSetParamCommand method

encodeCommand method

decodeCommand method

decodeAndExecuteCommand method

Data structures

VTrackerCommand enum

VTrackerParam enum

VTrackerParams class description

VTrackerParams class declaration

Serialize video tracker params

Deserialize video tracker params

Read params from JSON file and write to JSON file

Build and connect to your project

How to make custom implementation

About

Releases 7

Packages

Contributors 2

Languages

License

ConstantRobotics-Ltd/VTracker

Folders and files

Latest commit

History

Repository files navigation

VTracker interface C++ library

Table of contents

Overview

Versions

Library files

Required operating principles

VTracker class description

VTracker class declaration

getVersion method

initVTracker method

setParam method

getParam method

getParams method

executeCommand method

processFrame method

getImage method

encodeSetParamCommand method

encodeCommand method

decodeCommand method

decodeAndExecuteCommand method

Data structures

VTrackerCommand enum

VTrackerParam enum

VTrackerParams class description

VTrackerParams class declaration

Serialize video tracker params

Deserialize video tracker params

Read params from JSON file and write to JSON file

Build and connect to your project

How to make custom implementation

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 7

Packages 0

Contributors 2

Languages

Packages