Revert "chore(ci): sync litellm_internal_staging into daily OSS branch"

.github/pull_request_template.md

@@ -41,27 +41,3 @@ If you're seeing a delay in your PR being merged, ping the LiteLLM Team on [Slac
 ✅ Test
 
 ## Changes
-
-## QA runbook
-
-<!-- Only needed when your PR edits tests/e2e; delete this section otherwise
-
-For each e2e test you added or changed, list the manual steps a reviewer can follow to reproduce it by hand against a live proxy, mapping 1:1 to what the test asserts: one top-level bullet per test giving its pytest node id followed by what it proves in plain words, then a nested "- [ ]" checklist where each item is a concrete action (route, request body, expected response) and the final item is the sanity-check step shown in the examples. Note environment prerequisites (provider credentials, config flags) and any nuances a manual run will hit. See PRs #32914 and #32963 for full examples
-
-Example checklists:
-
-- tests/e2e/quota_management/ratelimit/test_rate_limit_e2e.py::TestKeyRateLimits::test_rpm_limit_blocks_over_limit - a key allowed 2 requests a minute serves exactly 2 and refuses the 3rd
-  - [ ] Generate a limited key: curl -X POST http://localhost:4000/key/generate -H "Authorization: Bearer sk-1234" -d '{"rpm_limit": 2}'
-  - [ ] Send three /v1/chat/completions requests with that key inside one minute
-  - [ ] Expect the first two to return 200 and the third to return 429 naming the rpm limit
-  - [ ] Sanity check: this test makes sense to add and is not hand-wavey (e.g., assert actual expected spend instead of just spend > 0) or potentially flaky
-
-- tests/e2e/management/test_management_e2e.py::TestModelRoutes::test_model_create_appears_in_ui - a deployment created through the API shows up on the Admin UI models page
-  - [ ] POST /model/new with the master key, a bedrock model, and aws_region_name (needs STORE_MODEL_IN_DB=True and AWS credentials)
-  - [ ] Open http://localhost:4000/ui/?page=models and expect a deployment row showing the returned model id
-  - [ ] Sanity check: this test makes sense to add and is not hand-wavey (e.g., assert actual expected spend instead of just spend > 0) or potentially flaky
--->
-
-### Final Attestation
-
-- [ ] The tests check the right things, including the edge cases, and regressions in the respective real-world customer use-cases are not possible after this PR

.github/workflows/_test-unit-base.yml

@@ -45,25 +45,19 @@ jobs:
     name: Run tests
     runs-on: ubuntu-latest
     timeout-minutes: ${{ inputs.timeout-minutes }}
-    outputs:
-      decision: ${{ steps.changes.outputs.decision }}
 
     steps:
       - uses: actions/checkout@08eba0b27e820071cde6df949e0beb9ba4906955 # v4.3.0
         with:
           persist-credentials: false
 
-      - name: Detect backend-relevant changes
-        id: changes
-        uses: ./.github/actions/detect-backend-changes
-
       - name: Set up Python
         uses: actions/setup-python@a26af69be951a213d495a4c3e4e4022e16d87065 # v5.6.0
         with:
           python-version: "3.12"
 
       - name: Set up uv
-        uses: ./.github/actions/setup-uv-with-retries
+        uses: astral-sh/setup-uv@37802adc94f370d6bfd71619e3f0bf239e1f3b78 # v7
         with:
           version: "0.10.9"
 
@@ -78,19 +72,16 @@ jobs:
             ${{ runner.os }}-uv-
 
       - name: Install dependencies
-        if: steps.changes.outputs.decision != 'skip'
         run: |
           .github/scripts/uv_sync_with_retries.sh --frozen --group ci --group proxy-dev --extra google --extra proxy --extra semantic-router
 
       - name: Generate Prisma client
-        if: steps.changes.outputs.decision != 'skip'
         env:
           PRISMA_BINARY_CACHE_DIR: ${{ runner.temp }}/prisma-cache
         run: |
           uv run --no-sync prisma generate --schema litellm/proxy/schema.prisma
 
       - name: Run tests
-        if: steps.changes.outputs.decision != 'skip'
         env:
           TEST_PATH: ${{ inputs.test-path }}
           MAX_FAILURES: ${{ inputs.max-failures }}
@@ -123,7 +114,7 @@ jobs:
           fi
 
       - name: Save coverage report
-        if: always() && steps.changes.outputs.decision != 'skip'
+        if: always()
         uses: actions/upload-artifact@4cec3d8aa04e39d1a68397de0c4cd6fb9dce8ec1 # v4.6.1
         with:
           name: coverage-${{ inputs.artifact-name }}-${{ github.run_id }}-${{ github.run_attempt }}
@@ -133,7 +124,7 @@ jobs:
   upload-coverage:
     name: Upload coverage to Codecov
     needs: run
-    if: always() && needs.run.outputs.decision != 'skip'
+    if: always()
     runs-on: ubuntu-latest
     permissions:
       contents: read

.github/workflows/auto_update_price_and_context_window.yml

@@ -18,7 +18,7 @@ jobs:
         with:
           persist-credentials: false
       - name: Set up uv
-        uses: ./.github/actions/setup-uv-with-retries
+        uses: astral-sh/setup-uv@37802adc94f370d6bfd71619e3f0bf239e1f3b78 # v7
         with:
           version: "0.10.9"
       - name: Update JSON Data

.github/workflows/check-ui-api-types.yml

@@ -31,7 +31,7 @@ jobs:
           python-version: "3.12"
 
       - name: Set up uv
-        uses: ./.github/actions/setup-uv-with-retries
+        uses: astral-sh/setup-uv@37802adc94f370d6bfd71619e3f0bf239e1f3b78 # v7
         with:
           version: "0.10.9"
 

.github/workflows/codspeed.yml

@@ -37,7 +37,7 @@ jobs:
           python-version: "3.12"
 
       - name: Set up uv
-        uses: ./.github/actions/setup-uv-with-retries
+        uses: astral-sh/setup-uv@37802adc94f370d6bfd71619e3f0bf239e1f3b78 # v7
         with:
           version: "0.10.9"
 

.github/workflows/guard-main-branch.yml

@@ -31,12 +31,12 @@ jobs:
           echo "PR head repo: $HEAD_REPO"
           echo "PR head branch: $HEAD_REF"
           if [ "$HEAD_REPO" != "$BASE_REPO" ]; then
-            echo "::error::PRs to main must originate from the canonical repository ($BASE_REPO), not a fork ($HEAD_REPO). External contributors should open PRs against the current daily OSS branch (named litellm_oss_daily_YYYY_MM_DD; a fresh one is cut each weekday, so target the most recent) instead."
+            echo "::error::PRs to main must originate from the canonical repository ($BASE_REPO), not a fork ($HEAD_REPO). External contributors should open PRs against the 'litellm_oss_staging' branch instead."
             exit 1
           fi
           if [ "$HEAD_REF" = "litellm_internal_staging" ] || [[ "$HEAD_REF" == litellm_hotfix_?* ]]; then
             echo "Allowed source branch."
             exit 0
           fi
-          echo "::error::PRs to main must originate from 'litellm_internal_staging' or a 'litellm_hotfix_*' branch. Got: '$HEAD_REF'. If this is a contribution, retarget the PR against the current daily OSS branch (named litellm_oss_daily_YYYY_MM_DD; a fresh one is cut each weekday, so target the most recent) instead."
+          echo "::error::PRs to main must originate from 'litellm_internal_staging' or a 'litellm_hotfix_*' branch. Got: '$HEAD_REF'. If this is a contribution, retarget the PR against 'litellm_oss_staging' instead."
           exit 1

.github/workflows/mutation-test.yml

@@ -39,7 +39,7 @@ jobs:
           python-version: "3.12"
 
       - name: Set up uv
-        uses: ./.github/actions/setup-uv-with-retries
+        uses: astral-sh/setup-uv@37802adc94f370d6bfd71619e3f0bf239e1f3b78 # v7
         with:
           version: "0.10.9"
 

.github/workflows/oss_daily_guardrails.yml

@@ -35,7 +35,7 @@ jobs:
           python-version: "3.12"
 
       - name: Set up uv
-        uses: ./.github/actions/setup-uv-with-retries
+        uses: astral-sh/setup-uv@37802adc94f370d6bfd71619e3f0bf239e1f3b78 # v7
         with:
           version: "0.10.9"
 

.github/workflows/test-code-quality.yml

@@ -38,7 +38,7 @@ jobs:
           python-version: "3.12"
 
       - name: Set up uv
-        uses: ./.github/actions/setup-uv-with-retries
+        uses: astral-sh/setup-uv@37802adc94f370d6bfd71619e3f0bf239e1f3b78 # v7
         with:
           version: "0.10.9"
 

.github/workflows/test-linting.yml

@@ -33,7 +33,7 @@ jobs:
           python-version: "3.12"
 
       - name: Set up uv
-        uses: ./.github/actions/setup-uv-with-retries
+        uses: astral-sh/setup-uv@37802adc94f370d6bfd71619e3f0bf239e1f3b78 # v7
         with:
           version: "0.10.9"
 
@@ -48,7 +48,7 @@ jobs:
 
       - name: Install dependencies
         run: |
-          uv sync --frozen --group proxy-dev --group e2e-dev
+          uv sync --frozen --group proxy-dev
 
       # basedpyright resolves Prisma's generated client (litellm/proxy/schema.prisma)
       # only after `prisma generate` writes prisma/client.py et al. Without this the
@@ -107,16 +107,6 @@ jobs:
         run: |
           (uv run --no-sync basedpyright --outputjson || true) | uv run --no-sync python scripts/type_check_gate.py --base "$BASE_SHA"
 
-      - name: Check tests/e2e basedpyright (zero errors)
-        env:
-          BASE_SHA: ${{ github.event.pull_request.base.sha }}
-        run: |
-          if git diff --name-only --diff-filter=ACMRD "$BASE_SHA"...HEAD -- 'tests/e2e/**/*.py' | grep -q .; then
-            uv run --no-sync basedpyright tests/e2e
-          else
-            echo "No changed tests/e2e Python files; skipping."
-          fi
-
       - name: Check for circular imports
         run: |
           cd litellm
@@ -172,7 +162,7 @@ jobs:
           python-version: "3.12"
 
       - name: Set up uv
-        uses: ./.github/actions/setup-uv-with-retries
+        uses: astral-sh/setup-uv@37802adc94f370d6bfd71619e3f0bf239e1f3b78 # v7
         with:
           version: "0.10.9"
 

.github/workflows/test-litellm-ui-build.yml

@@ -36,3 +36,79 @@ jobs:
 
       - name: Build
         run: npm run build
+
+  frontend-lint:
+    runs-on: ubuntu-latest
+    timeout-minutes: 8
+    defaults:
+      run:
+        working-directory: ui/litellm-dashboard
+
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@08eba0b27e820071cde6df949e0beb9ba4906955 # v4.3.0
+        with:
+          fetch-depth: 0
+          persist-credentials: false
+
+      - name: Collect changed files
+        id: changed
+        env:
+          BASE_SHA: ${{ github.event.pull_request.base.sha }}
+        run: |
+          : > "$RUNNER_TEMP/prettier_files.txt"
+          : > "$RUNNER_TEMP/eslint_files.txt"
+          while IFS= read -r f; do
+            [ -f "$f" ] || continue
+            case "$f" in
+              *.js | *.jsx | *.ts | *.tsx | *.mjs | *.cjs)
+                printf '%s\n' "$f" >> "$RUNNER_TEMP/prettier_files.txt"
+                printf '%s\n' "$f" >> "$RUNNER_TEMP/eslint_files.txt" ;;
+              *.json | *.css | *.scss | *.md | *.mdx | *.yml | *.yaml | *.html)
+                printf '%s\n' "$f" >> "$RUNNER_TEMP/prettier_files.txt" ;;
+            esac
+          done < <(git diff --name-only --diff-filter=ACMR --relative "$BASE_SHA"...HEAD -- .)
+          if [ -s "$RUNNER_TEMP/prettier_files.txt" ] || [ -s "$RUNNER_TEMP/eslint_files.txt" ]; then
+            echo "has_files=true" >> "$GITHUB_OUTPUT"
+          else
+            echo "has_files=false" >> "$GITHUB_OUTPUT"
+            echo "No lintable UI files changed in this PR; nothing to check."
+          fi
+
+      - name: Setup Node.js
+        if: steps.changed.outputs.has_files == 'true'
+        uses: actions/setup-node@a0853c24544627f65ddf259abe73b1d18a591444 # v5.0.0
+        with:
+          node-version: "20"
+          cache: "npm"
+          cache-dependency-path: ui/litellm-dashboard/package-lock.json
+
+      - name: Install dependencies
+        if: steps.changed.outputs.has_files == 'true'
+        run: npm ci
+
+      - name: Lint changed files (prettier + eslint)
+        if: steps.changed.outputs.has_files == 'true'
+        run: |
+          prettier_files=()
+          eslint_files=()
+          while IFS= read -r f; do prettier_files+=("$f"); done < "$RUNNER_TEMP/prettier_files.txt"
+          while IFS= read -r f; do eslint_files+=("$f"); done < "$RUNNER_TEMP/eslint_files.txt"
+          status=0
+          if [ ${#prettier_files[@]} -gt 0 ]; then
+            echo "::group::Prettier (${#prettier_files[@]} files)"
+            npx prettier --check "${prettier_files[@]}" || { status=1; echo "::error::Unformatted files. Fix with: npm run format"; }
+            echo "::endgroup::"
+          fi
+          if [ ${#eslint_files[@]} -gt 0 ]; then
+            echo "::group::ESLint (${#eslint_files[@]} files)"
+            npx eslint --no-warn-ignored --pass-on-unpruned-suppressions "${eslint_files[@]}" || status=1
+            echo "::endgroup::"
+          fi
+          exit $status
+
+      - name: Check lint budgets
+        if: ${{ !cancelled() && steps.changed.outputs.has_files == 'true' }}
+        run: |
+          npx eslint . -f json -o "$RUNNER_TEMP/lint-report.json" || true
+          node scripts/check-lint-budgets.mjs "$RUNNER_TEMP/lint-report.json" eslint-budgets.json --check eslint-metrics.json