Replace Start-Sleep with Start-TestSleep to avoid waiting during playback

src/ADDomainServices/ADDomainServices.Autorest/test/Remove-AzADDomainService.Tests.ps1

@@ -21,7 +21,7 @@ Describe 'Remove-AzADDomainService' {
     It 'DeleteViaIdentity' {
         $ReplicaSet = New-AzADDomainServiceReplicaSetObject -Location $env.Location -SubnetId $env.SubnetId
         $NewAdDomain = New-AzADDomainService -name $env.ADdomainName -ResourceGroupName $env.ResourceGroupName -DomainName $env.ADDomainNameCom -ReplicaSet $ReplicaSet
-        # Start-Sleep -s 120
+        Start-TestSleep 120
         $GetADDomainExample = Get-AzADDomainService -ResourceGroupName $env.ResourceGroupName -Name $env.ADdomainName
         Remove-AzADDomainService -InputObject $GetADDomainExample
         $GetADDomainList = Get-AzADDomainService

src/ADDomainServices/ADDomainServices.Autorest/test/Update-AzADDomainService.Tests.ps1

@@ -18,7 +18,7 @@ Describe 'Update-AzADDomainService' {
     }
 
     It 'UpdateViaIdentityExpanded' {
-        # Start-Sleep -s 240
+        Start-TestSleep 240
         $GetADDomainExample = Get-AzADDomainService -ResourceGroupName $env.ResourceGroupName -Name $env.ADdomainName
         $UpdateADDomain = Update-AzADDomainService -InputObject $GetADDomainExample -DomainSecuritySettingTlsV1 $env.TlsV1Status2
         $UpdateADDomain.DomainSecuritySettingTlsV1 | Should -Be $env.TlsV1Status2

src/DataMigration/DataMigration.Autorest/test/Remove-AzDataMigrationToSqlDb.Tests.ps1

@@ -20,16 +20,16 @@ Describe 'Remove-AzDataMigrationToSqlDb' {
         $sourcePassword = ConvertTo-SecureString $env.TestDeleteDatabaseMigrationDb.SourceSqlConnectionPassword -AsPlainText -Force
 
         $instance = New-AzDataMigrationToSqlDb -ResourceGroupName $env.TestDeleteDatabaseMigrationDb.ResourceGroupName -SqlDbInstanceName $env.TestDeleteDatabaseMigrationDb.SqlDbInstanceName -MigrationService  $env.TestDeleteDatabaseMigrationDb.MigrationService -TargetSqlConnectionAuthentication $env.TestDeleteDatabaseMigrationDb.TargetSqlConnectionAuthentication -TargetSqlConnectionDataSource $env.TestDeleteDatabaseMigrationDb.TargetSqlConnectionDataSource -TargetSqlConnectionPassword $targetPassword -TargetSqlConnectionUserName $env.TestDeleteDatabaseMigrationDb.TargetSqlConnectionUserName -SourceSqlConnectionAuthentication $env.TestDeleteDatabaseMigrationDb.SourceSqlConnectionAuthentication -SourceSqlConnectionDataSource $env.TestDeleteDatabaseMigrationDb.SourceSqlConnectionDataSource -SourceSqlConnectionUserName $env.TestDeleteDatabaseMigrationDb.SourceSqlConnectionUserName -SourceSqlConnectionPassword $sourcePassword -SourceDatabaseName $env.TestDeleteDatabaseMigrationDb.SourceDatabaseName -TargetDbName $env.TestDeleteDatabaseMigrationDb.TargetDbName -Scope  $env.TestDeleteDatabaseMigrationDb.Scope
-        
-        Start-Sleep -Seconds 5
+
+        Start-TestSleep -Seconds 5
 
         Remove-AzDataMigrationToSqlDb -ResourceGroupName $env.TestDeleteDatabaseMigrationDb.ResourceGroupName -SqlDbInstanceName $env.TestDeleteDatabaseMigrationDb.SqlDbInstanceName -TargetDbName $env.TestDeleteDatabaseMigrationDb.TargetDbName -Force
 
-        Start-Sleep -Seconds 5
-        
-        
+        Start-TestSleep -Seconds 5
+
+
         $dbMig = Get-AzDataMigrationToSqlDb -ResourceGroupName $env.TestDeleteDatabaseMigrationDb.ResourceGroupName -SqlDbInstanceName $env.TestDeleteDatabaseMigrationDb.SqlDbInstanceName -TargetDbName $env.TestDeleteDatabaseMigrationDb.TargetDbName -ErrorAction SilentlyContinue
-        
+
 
         $assert =  ($dbMig -eq $null)
         $assert | Should be $true

src/DataProtection/DataProtection.Autorest/test/Backup-AzDataProtectionBackupInstanceAdhoc.Tests.ps1

@@ -28,7 +28,7 @@ Describe 'Backup-AzDataProtectionBackupInstanceAdhoc' {
         $jobstatus = "InProgress"
         while($jobstatus -eq "InProgress")
         {
-            Start-Sleep -Seconds 5
+            Start-TestSleep -Seconds 5
             $currentjob = Get-AzDataProtectionJob -Id $jobid -SubscriptionId $sub -ResourceGroupName $rgName -VaultName $vaultName
             $jobstatus = $currentjob.Status
         }
@@ -38,21 +38,21 @@ Describe 'Backup-AzDataProtectionBackupInstanceAdhoc' {
 
     It 'OssBackup' {
         # Test trigger Backup for Oss DB
-        # Delete this test 
+        # Delete this test
         $sub = $env.TestOssBackupScenario.SubscriptionId
         $rgName = $env.TestOssBackupScenario.ResourceGroupName
         $vaultName = $env.TestOssBackupScenario.VaultName
-        $policyName = $env.TestOssBackupScenario.PolicyName   
+        $policyName = $env.TestOssBackupScenario.PolicyName
         $dataSourceId = $env.TestOssBackupScenario.OssDbId
         $serverName = $env.TestOssBackupScenario.OssServerName
         $keyVault = $env.TestOssBackupScenario.KeyVault
         $secretURI = $env.TestOssBackupScenario.SecretURI
-        
+
         $vault = Get-AzDataProtectionBackupVault -SubscriptionId $sub -ResourceGroupName $rgName  -VaultName  $vaultName
         $policy = Get-AzDataProtectionBackupPolicy -SubscriptionId $sub -VaultName $vaultName -ResourceGroupName $rgName | where {$_.Name -eq $policyName}
 
         $instance  = Get-AzDataProtectionBackupInstance -Subscription $sub -ResourceGroup $rgName -Vault $vaultName | Where-Object {($_.Property.DataSourceInfo.Type -eq "Microsoft.DBforPostgreSQL/servers/databases") -and ($_.Property.DataSourceInfo.ResourceId -match $serverName)}
-        
+
         ($instance -ne $null) | Should be $true
 
         $backupJob = Backup-AzDataProtectionBackupInstanceAdhoc -BackupInstanceName $instance.Name -ResourceGroupName $rgName -SubscriptionId $sub -VaultName $vaultName -BackupRuleOptionRuleName $policy.Property.PolicyRule[0].Name -TriggerOptionRetentionTagOverride $policy.Property.PolicyRule[0].Trigger.TaggingCriterion[0].TagInfoTagName
@@ -61,7 +61,7 @@ Describe 'Backup-AzDataProtectionBackupInstanceAdhoc' {
         $jobstatus = "InProgress"
         while($jobstatus -ne "Completed")
         {
-            Start-Sleep -Seconds 10
+            Start-TestSleep -Seconds 10
             $currentjob = Get-AzDataProtectionJob -Id $jobid -SubscriptionId $sub -ResourceGroupName $rgName -VaultName $vaultName
             $jobstatus = $currentjob.Status
         }

src/DataProtection/DataProtection.Autorest/test/BlobHardeningScenario.Tests.ps1

@@ -23,34 +23,34 @@ Describe 'BlobHardeningScenario' {
 
         $vault = Get-AzDataProtectionBackupVault -SubscriptionId $subId -ResourceGroupName $resourceGroupName -VaultName $vaultName
         $pol = Get-AzDataProtectionBackupPolicy -SubscriptionId $subId -VaultName $vaultName -ResourceGroupName $resourceGroupName | Where { $_.Name -match $policyName }
-        
+
         $instance = Get-AzDataProtectionBackupInstance -SubscriptionId $subId -ResourceGroupName $resourceGroupName -VaultName $vaultName | Where { $_.Name -match $storageAcountName }
 
         # Remove-BI
         if($instance -ne $null){
             Remove-AzDataProtectionBackupInstance -Name $instance[0].Name -SubscriptionId $subId -ResourceGroupName $resourceGroupName -VaultName $vaultName
         }
 
-        Start-Sleep -Seconds 8
+        Start-TestSleep -Seconds 8
 
         # new backup config and initialize BI
-                        
-        $storageAccount = Get-AzStorageAccount -ResourceGroupName $resourceGroupName -Name $storageAccountName 
+
+        $storageAccount = Get-AzStorageAccount -ResourceGroupName $resourceGroupName -Name $storageAccountName
         $containers=Get-AzStorageContainer -Context $storageAccount.Context
-        
-        $backupConfig = New-AzDataProtectionBackupConfigurationClientObject -DatasourceType AzureBlob -VaultedBackupContainer $containers.Name        
+
+        $backupConfig = New-AzDataProtectionBackupConfigurationClientObject -DatasourceType AzureBlob -VaultedBackupContainer $containers.Name
         $backupConfig.ContainersList = $backupConfig.ContainersList[1,3,4]
 
         $backupInstanceClientObject = Initialize-AzDataProtectionBackupInstance -DatasourceType AzureBlob -DatasourceLocation $vault.Location -PolicyId $pol[0].Id -DatasourceId $storageAccId -BackupConfiguration $backupConfig
 
-        # assign permissions and validate 
+        # assign permissions and validate
         Set-AzDataProtectionMSIPermission -VaultResourceGroup $resourceGroupName -VaultName $vaultName -BackupInstance $backupInstanceClientObject -PermissionsScope ResourceGroup
 
         $operationResponse = Test-AzDataProtectionBackupInstanceReadiness -ResourceGroupName $resourceGroupName -VaultName $vaultName -SubscriptionId $subId -BackupInstance $backupInstanceClientObject.Property -NoWait
         $operationId = $operationResponse.Target.Split("/")[-1].Split("?")[0]
-        
+
         While((Get-AzDataProtectionOperationStatus -OperationId $operationId -Location $vault.Location -SubscriptionId $subId).Status -eq "Inprogress"){
-	        Start-Sleep -Seconds 10
+	        Start-TestSleep -Seconds 10
         }
 
         # backup
@@ -59,7 +59,7 @@ Describe 'BlobHardeningScenario' {
         $instance = Get-AzDataProtectionBackupInstance -SubscriptionId $subId -ResourceGroupName $resourceGroupName -VaultName $vaultName | Where { $_.Name -match $storageAcountName }
 
         while($instance.Property.CurrentProtectionState -ne "ProtectionConfigured"){
-            Start-Sleep -Seconds 10
+            Start-TestSleep -Seconds 10
             $instance = Get-AzDataProtectionBackupInstance -SubscriptionId $subId -ResourceGroupName $resourceGroupName -VaultName $vaultName | Where { $_.Name -match $storageAcountName }
         }
 
@@ -74,15 +74,15 @@ Describe 'BlobHardeningScenario' {
         $jobstatus = "InProgress"
         while($jobstatus -ne "Completed")
         {
-            Start-Sleep -Seconds 10
+            Start-TestSleep -Seconds 10
             $currentjob = Get-AzDataProtectionJob -Id $jobid -SubscriptionId $subId -ResourceGroupName $resourceGroupName -VaultName $vaultName
             $jobstatus = $currentjob.Status
         }
-        $jobstatus | Should be "Completed"        
+        $jobstatus | Should be "Completed"
     }
 
     It 'TriggerRestore' -skip {
-        # TODO: OLR should throw an error in case of vaulted backups 
+        # TODO: OLR should throw an error in case of vaulted backups
 
         $subId = $env.TestBlobHardeningScenario.SubscriptionId
         $crossSubscriptionId = $env.TestBlobHardeningScenario.CrossSubscriptionId
@@ -112,7 +112,7 @@ Describe 'BlobHardeningScenario' {
         foreach($crossSubContainerName in $targetCrossSubContainers.Name){
             Remove-AzStorageContainer -Context $targetCrossSubStorageAccount.Context -Name $crossSubContainerName -Confirm:$false -Force
         }
-        
+
         # remove containers in target storage account
         Set-AzContext -SubscriptionId $subId
         $targetStorageAccount = Get-AzStorageAccount -ResourceGroupName $targetStorageAccountRGName -Name $targetStorageAccountName
@@ -128,7 +128,7 @@ Describe 'BlobHardeningScenario' {
         $validateRestore.ObjectType | Should be "OperationJobExtendedInfo"
 
         $restoreJob = Start-AzDataProtectionBackupInstanceRestore -SubscriptionId $subId -ResourceGroupName $resourceGroupName -VaultName $vaultName -BackupInstanceName $instance.BackupInstanceName -Parameter $restoreReq
-        
+
         $restoreReqCSR = Initialize-AzDataProtectionRestoreRequest -DatasourceType AzureBlob -SourceDataStore VaultStore -RestoreLocation $vault.Location -RecoveryPoint $rp[0].Name -ItemLevelRecovery -RestoreType AlternateLocation -TargetResourceId $targetCrossSubStorageAccId -ContainersList $backedUpContainers[0,1]
 
         $validateRestore = Test-AzDataProtectionBackupInstanceRestore -Name $instance[0].Name -ResourceGroupName $resourceGroupName -SubscriptionId $subId -VaultName $vaultName -RestoreRequest $restoreReqCSR

src/DataProtection/DataProtection.Autorest/test/DiskBackupScenario.Tests.ps1

@@ -15,7 +15,7 @@ Describe 'DiskBackupScenario' {
     It 'EndtoEndTest' {
         $vaultName = $env.TestDiskBackupScenario.VaultName
         $rgName = $env.TestDiskBackupScenario.ResourceGroupName
-        $diskId = $env.TestDiskBackupScenario.DiskId 
+        $diskId = $env.TestDiskBackupScenario.DiskId
         $snapshotRg = $env.TestDiskBackupScenario.SnapshotRG
         $restoreDiskId = $env.TestDiskBackupScenario.RestoreDiskId
         $policyName = $env.TestDiskBackupScenario.NewPolicyName
@@ -25,7 +25,7 @@ Describe 'DiskBackupScenario' {
         $defaultPolicy = Get-AzDataProtectionPolicyTemplate -DatasourceType AzureDisk
         $policyId = "/subscriptions/" + $sub + "/resourceGroups/" + $rgName + "/providers/Microsoft.DataProtection/backupVaults/" + $vaultName + "/backupPolicies/" + $policyName
         $backupInstance = Initialize-AzDataProtectionBackupInstance -DatasourceType AzureDisk -DatasourceLocation centraluseuap -PolicyId $policyId -DatasourceId $diskId -SnapshotResourceGroupId $snapshotRg
-        
+
         $instances = Get-AzDataProtectionBackupInstance -SubscriptionId $sub -ResourceGroupName $rgName -VaultName $vaultName
         $instance = $instances | where-Object {$_.Property.DataSourceInfo.ResourceId -eq $diskId}
         $backupInstanceName = $instance.Name
@@ -34,24 +34,24 @@ Describe 'DiskBackupScenario' {
         $protectionStatus = $instance.Property.ProtectionStatus.Status
         while($protectionStatus -ne "ProtectionConfigured")
         {
-            Start-Sleep -Seconds 5
+            Start-TestSleep -Seconds 5
 
             $instance = Get-AzDataProtectionBackupInstance -SubscriptionId $sub -ResourceGroupName $rgName -VaultName $vaultName -Name $backupInstanceName
             $protectionStatus = $instance.Property.ProtectionStatus.Status
 
             # configure backup if not configured
         }
 
-        $backupPolicyId = $instance.Property.PolicyInfo.PolicyId 
+        $backupPolicyId = $instance.Property.PolicyInfo.PolicyId
         $policy = Get-AzDataProtectionBackupPolicy -SubscriptionId $sub -VaultName $vaultName -ResourceGroupName $rgName | Where-Object { $_.Id -eq $backupPolicyId  }
-        
+
         $job = Backup-AzDataProtectionBackupInstanceAdhoc -SubscriptionId $sub -ResourceGroupName $rgName -VaultName $vaultName -BackupInstanceName $backupInstanceName -BackupRuleOptionRuleName  $policy.Property.PolicyRule[0].Name -TriggerOptionRetentionTagOverride $policy.Property.PolicyRule[0].Trigger.TaggingCriterion[0].TagInfoTagName
 
         $jobid = $job.JobId.Split("/")[-1]
         $jobstatus = "InProgress"
         while($jobstatus -ne "Completed")
         {
-            Start-Sleep -Seconds 5
+            Start-TestSleep -Seconds 5
             $currentjob = Get-AzDataProtectionJob -Id $jobid -SubscriptionId $sub -ResourceGroupName $rgName -VaultName $vaultName
             $jobstatus = $currentjob.Status
         }
@@ -64,7 +64,7 @@ Describe 'DiskBackupScenario' {
         $jobstatus = "InProgress"
         while($jobstatus -ne "Completed")
         {
-            Start-Sleep -Seconds 5
+            Start-TestSleep -Seconds 5
             $currentjob = Get-AzDataProtectionJob -Id $jobid -SubscriptionId $sub -ResourceGroupName $rgName -VaultName $vaultName
             $jobstatus = $currentjob.Status
         }

src/DataProtection/DataProtection.Autorest/test/Initialize-AzDataProtectionRestoreRequest.Tests.ps1

@@ -16,26 +16,26 @@ Describe 'Initialize-AzDataProtectionRestoreRequest' {
         $sub = $env.TestBlobsRestore.SubscriptionId
         $rgName = $env.TestBlobsRestore.ResourceGroupName
         $vaultName = $env.TestBlobsRestore.VaultName
-        
+
         # $Debug preference = "Continue"
         Write-Debug  -Message $sub
         Write-Debug  -Message $rgName
         Write-Debug  -Message $vaultName
 
         $instances  = Get-AzDataProtectionBackupInstance -Subscription $sub -ResourceGroup $rgName -Vault $vaultName | Where-Object {($_.Property.DataSourceInfo.Type -eq "Microsoft.Storage/storageAccounts/blobServices") -and ($_.Property.CurrentProtectionState -eq "ProtectionConfigured")}
-        
+
         if($instances.Count -gt 0){
-            
+
             $pointInTimeRange = Find-AzDataProtectionRestorableTimeRange -BackupInstanceName $instances[0].BackupInstanceName -ResourceGroupName $rgName -SubscriptionId $sub -VaultName $vaultName -SourceDataStoreType OperationalStore -StartTime (Get-Date).AddDays(-30).ToString("yyyy-MM-ddTHH:mm:ss.0000000Z") -EndTime (Get-Date).AddDays(0).ToString("yyyy-MM-ddTHH:mm:ss.0000000Z")
             $vault = Get-AzDataProtectionBackupVault -ResourceGroupName $rgName -SubscriptionId $sub -VaultName $vaultName
             $BlobResReq = Initialize-AzDataProtectionRestoreRequest -DatasourceType AzureBlob -SourceDataStore OperationalStore -RestoreLocation $vault.Location -RestoreType OriginalLocation -BackupInstance $instances[0] -PointInTime (Get-Date -Date $pointInTimeRange.RestorableTimeRange.EndTime)
 
-            $restoreJob = Start-AzDataProtectionBackupInstanceRestore -BackupInstanceName $instances[0].BackupInstanceName -ResourceGroupName $rgName -VaultName $vaultName -SubscriptionId $sub -Parameter $BlobResReq 
+            $restoreJob = Start-AzDataProtectionBackupInstanceRestore -BackupInstanceName $instances[0].BackupInstanceName -ResourceGroupName $rgName -VaultName $vaultName -SubscriptionId $sub -Parameter $BlobResReq
             $jobid = $restoreJob.JobId.Split("/")[-1]
             $jobstatus = "InProgress"
             while($jobstatus -ne "Completed")
             {
-                Start-Sleep -Seconds 10
+                Start-TestSleep -Seconds 10
                 $currentjob = Get-AzDataProtectionJob -Id $jobid -SubscriptionId $sub -ResourceGroupName $rgName -VaultName $vaultName
                 $jobstatus = $currentjob.Status
             }