Fix Az.Network Syntax Errors

src/Network/Network/help/Add-AzApplicationGatewayBackendAddressPool.md

@@ -36,7 +36,7 @@ The first command gets the application gateway named ApplicationGateway01 in the
 ### Example 2: Add a back-end address pool by using backend server IP addresses
 ```powershell
 $AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-$AppGw = Add-AzApplicationGatewayBackendAddressPool -ApplicationGateway $ AppGw -Name "Pool02" -BackendIPAddresses "10.10.10.10", "10.10.10.11"
+$AppGw = Add-AzApplicationGatewayBackendAddressPool -ApplicationGateway $AppGw -Name "Pool02" -BackendIPAddresses "10.10.10.10", "10.10.10.11"
 ```
 
 The first command gets the application gateway named ApplicationGateway01 in the resource group named ResourceGroup01, and stores it in the $AppGw variable.The second command adds the back-end address pool of the application gateway stored in $AppGw by using IP addresses.

src/Network/Network/help/Add-AzApplicationGatewayCustomError.md

@@ -26,7 +26,7 @@ The **Add-AzApplicationGatewayCustomError** cmdlet adds a custom error to an app
 ```powershell
 $resourceGroupName = "resourceGroupName"
 $AppGWName = "applicationGatewayName"
-$AppGw = Get-AzApplicationGateway -Name $AppGWName -ResourceGroup $resourceGroupName
+$AppGw = Get-AzApplicationGateway -Name $AppGWName -ResourceGroupName $resourceGroupName
 $customError502Url = "https://mycustomerrorpages.blob.core.windows.net/errorpages/502.htm"
 $updatedgateway = Add-AzApplicationGatewayCustomError -ApplicationGateway $AppGw -StatusCode HttpStatus502 -CustomErrorPageUrl $customError502Url
 Set-AzApplicationGateway -ApplicationGateway $AppGw

src/Network/Network/help/Add-AzApplicationGatewayTrustedRootCertificate.md

@@ -26,7 +26,7 @@ The **Add-AzApplicationGatewayTrustedRootCertificate** cmdlet adds a trusted roo
 ```powershell
 $gw = Get-AzApplicationGateway -Name $appgwName -ResourceGroupName $resgpName
 $gw = Add-AzApplicationGatewayTrustedRootCertificate -ApplicationGateway $gw -Name $certName -CertificateFile ".\rootCA.cer"
-$gw = Add-AzApplicationGatewayBackendHttpSettings -ApplicationGateway $gw -Name $poolSetting01Name -Port 443 -Protocol Https -CookieBasedAffinity Enabled -PickHostNameFromBackendAddress -TrustedRootCertificate $gw.TrustedRootCertificates[0]
+$gw = Add-AzApplicationGatewayBackendHttpSetting -ApplicationGateway $gw -Name $poolSetting01Name -Port 443 -Protocol Https -CookieBasedAffinity Enabled -PickHostNameFromBackendAddress -TrustedRootCertificate $gw.TrustedRootCertificates[0]
 $gw = Set-AzApplicationGateway -ApplicationGateway $gw
 ```
 

src/Network/Network/help/Add-AzApplicationGatewayUrlPathMapConfig.md

@@ -55,7 +55,7 @@ The **Add-AzApplicationGatewayUrlPathMapConfig** cmdlet adds an array of URL pat
 ```powershell
 $appgw = Get-AzApplicationGateway -ResourceGroupName "rg" -Name "appGwName"
 $pool = Get-AzApplicationGatewayBackendAddressPool -ApplicationGateway $appgw -Name "pool01"
-$poolSettings = Get-AzApplicationGatewayBackendHttpSettings -ApplicationGateway $appgw -Name "poolSettings01"
+$poolSettings = Get-AzApplicationGatewayBackendHttpSetting -ApplicationGateway $appgw -Name "poolSettings01"
 $pathRule = New-AzApplicationGatewayPathRuleConfig -Name "rule01" -Paths "/path" -BackendAddressPool $pool -BackendHttpSettings $poolSettings
 $appgw = Add-AzApplicationGatewayUrlPathMapConfig -ApplicationGateway $appgw -Name "url01" -PathRules $pathRule -DefaultBackendAddressPool $pool -DefaultBackendHttpSettings $poolSettings
 $appgw = Set-AzApplicationGateway -ApplicationGateway $appgw

src/Network/Network/help/Add-AzDelegation.md

@@ -27,7 +27,7 @@ The **Add-AzDelegation** cmdlet adds a service delegation to an Azure subnet.
 $vnet = Get-AzVirtualNetwork -Name "myVNet" -ResourceGroupName "myResourceGroup"
 $subnet = Get-AzVirtualNetworkSubnetConfig -Name "mySubnet" -VirtualNetwork $vnet
 $subnet = Add-AzDelegation -Name "myDelegation" -ServiceName "Microsoft.Sql/servers" -Subnet $subnet
-Set-AzVirtualNetwork $vnet
+Set-AzVirtualNetwork -VirtualNetwork $vnet
 ```
 
 The first command retrieves the virtual network on which the subnet lies. The second command isolates out the subnet of interest - the one which you want to delegate. The third command adds a delegation to the subnet. This particular example would be useful when you want to enable SQL to create interface endpoints in this subnet. The final command sends the updated subnet to the server to actually update your subnet.

src/Network/Network/help/Add-AzExpressRouteCircuitAuthorization.md

@@ -39,7 +39,7 @@ enabled for use.
 ### Example 1: Add an authorization to the specified ExpressRoute circuit
 ```powershell
 $Circuit = Get-AzExpressRouteCircuit -Name "ContosoCircuit" -ResourceGroupName "ContosoResourceGroup"
-Add-AzExpressRouteCircuitAuthorization -Name "ContosoCircuitAuthorization" -Circuit $Circuit
+Add-AzExpressRouteCircuitAuthorization -Name "ContosoCircuitAuthorization" -ExpressRouteCircuit $Circuit
 Set-AzExpressRouteCircuit -ExpressRouteCircuit $Circuit
 ```
 

src/Network/Network/help/Add-AzServiceEndpointPolicyDefinition.md

@@ -25,7 +25,7 @@ The **Add-AzServiceEndpointPolicyDefinition** cmdlet add a service endpoint poli
 
 ### Example 1: Updates a service endpoint policy definition in a service endpoint policy
 ```powershell
-$policydef= New-AzServiceEndpointPolicyDefinition -Name "ServiceEndpointPolicyDefinition1" -ResourceGroupName "ResourceGroup01" -Service "Microsoft.Storage" -ServiceResources "subscriptions/sub1" -Description "New Definition"
+$policydef= New-AzServiceEndpointPolicyDefinition -Name "ServiceEndpointPolicyDefinition1" -Service "Microsoft.Storage" -ServiceResource "subscriptions/sub1" -Description "New Definition"
 ```
 
 This command updated the service endpoint policy definition with name ServiceEndpointPolicyDefinition1,  service Microsoft.Storage, service resources subscriptions/sub1 and 

src/Network/Network/help/Add-AzVirtualRouterPeer.md

@@ -25,7 +25,7 @@ The **Add-AzVirtualRouterPeer** cmdlet adds a VirtualRouter Peer to an Azure Vir
 
 ### Example 1
 ```powershell
-Add-AzVirtualRouterPeer 1ResourceGroupName virtualRouterRG -PeerName csr -PeerIp 10.0.1.5 -PeerAsn 63000  -VirtualRouterName virtualRouter
+Add-AzVirtualRouterPeer -ResourceGroupName virtualRouterRG -PeerName csr -PeerIp 10.0.1.5 -PeerAsn 63000  -VirtualRouterName virtualRouter
 ```
 
 ## PARAMETERS

src/Network/Network/help/Get-AzApplicationGatewayAvailableServerVariableAndHeader.md

@@ -45,7 +45,7 @@ This commands returns all the available response headers.
 
 ### Example 4
 ```powershell
-Get-AzApplicationGatewayAvailableServerVariableAndHeader - ServerVariable -RequestHeader -ResponseHeader
+Get-AzApplicationGatewayAvailableServerVariableAndHeader -ServerVariable -RequestHeader -ResponseHeader
 ```
 
 This commands returns all the available server variables, request and response headers.

src/Network/Network/help/Get-AzApplicationGatewayConnectionDraining.md

@@ -25,7 +25,7 @@ The **Get-AzApplicationGatewayConnectionDraining** cmdlet gets the connection dr
 ### Example 1
 ```powershell
 $AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-$Settings  = Get-AzApplicationGatewayBackendHttpSettings -Name "Settings01" -ApplicationGateway $AppGw
+$Settings  = Get-AzApplicationGatewayBackendHttpSetting -Name "Settings01" -ApplicationGateway $AppGw
 $ConnectionDraining = Get-AzApplicationGatewayConnectionDraining -BackendHttpSettings $Settings
 ```
 

src/Network/Network/help/Get-AzApplicationGatewayHttpListenerCustomError.md

@@ -25,14 +25,14 @@ The **Get-AzApplicationGatewayCustomError** cmdlet gets custom error(s) from a h
 
 ### Example 1: Gets a custom error in a http listener
 ```powershell
-$ce = Get-AzApplicationGatewayCustomError -HttpListener $listener01 -StatusCode HttpStatus502
+$ce = Get-AzApplicationGatewayHttpListenerCustomError -HttpListener $listener01 -StatusCode HttpStatus502
 ```
 
 This command gets and returns the custom error of http status code 502 from the http listener $listener01.
 
 ### Example 2: Gets the list of all custom errors in a http listener
 ```powershell
-$ces = Get-AzApplicationGatewayCustomError -HttpListener $listener01
+$ces = Get-AzApplicationGatewayHttpListenerCustomError -HttpListener $listener01
 ```
 
 This command gets and returns the list of all custom errors from the http listener $listener01.

src/Network/Network/help/Get-AzApplicationGatewayTrustedRootCertificate.md

@@ -25,7 +25,7 @@ The **Get-AzApplicationGatewayTrustedRootCertificate** cmdlet gets Trusted Root
 ### Example 1
 ```powershell
 $gw = Get-AzApplicationGateway -Name $appgwName -ResourceGroupName $resgpName
-$trustedRootCert = Get-AzApplicationGatewayTrustedRootCertificate -ApplicationGateway $gw -Name $certName --CertificateFile ".\rootCA.cer"
+$trustedRootCert = Get-AzApplicationGatewayTrustedRootCertificate -ApplicationGateway $gw -Name $certName -CertificateFile ".\rootCA.cer"
 ```
 
 The first command gets the Application Gateway and stores it in $gw variable.

src/Network/Network/help/Get-AzExpressRouteCircuitAuthorization.md

@@ -33,7 +33,7 @@ well as other information about the authorization, can be viewed at any time by
 ### Example 1: Get all ExpressRoute authorizations
 ```powershell
 $Circuit = Get-AzExpressRouteCircuit -Name "ContosoCircuit" -ResourceGroupName "ContosoResourceGroup"
-Get-AzExpressRouteCircuitAuthorization -Circuit $Circuit
+Get-AzExpressRouteCircuitAuthorization -ExpressRouteCircuit $Circuit
 ```
 
 These commands return information about all the ExpressRoute authorizations associated with an
@@ -46,7 +46,7 @@ authorizations associated with ContosoCircuit.
 ### Example 2: Get all ExpressRoute authorizations using the Where-Object cmdlet
 ```powershell
 $Circuit = Get-AzExpressRouteCircuit -Name "ContosoCircuit" -ResourceGroupName "ContosoResourceGroup"
- Get-AzExpressRouteCircuitAuthorization -Circuit $Circuit | Where-Object {$_.AuthorizationUseStatus -eq "Available"}
+ Get-AzExpressRouteCircuitAuthorization -ExpressRouteCircuit $Circuit | Where-Object {$_.AuthorizationUseStatus -eq "Available"}
 ```
 
 These commands represent a variation on the commands used in Example 1. In this case, however,

src/Network/Network/help/Get-AzExpressRouteConnection.md

@@ -47,8 +47,8 @@ $ExpressRouteCircuit = New-AzExpressRouteCircuit -ResourceGroupName "testRG" -Na
 Add-AzExpressRouteCircuitPeeringConfig -Name "AzurePrivatePeering" -ExpressRouteCircuit $ExpressRouteCircuit -PeeringType AzurePrivatePeering -PeerASN 100 -PrimaryPeerAddressPrefix "123.0.0.0/30" -SecondaryPeerAddressPrefix "123.0.0.4/30" -VlanId 300
 $ExpressRouteCircuit = Set-AzExpressRouteCircuit -ExpressRouteCircuit $ExpressRouteCircuit
 $ExpressRouteCircuitPeeringId = $ExpressRouteCircuit.Peerings[0].Id
-New-AzExpressRouteConnection -ResourceGroupName $ExpressRouteGateway.ResourceGroupName -ParentResourceName $ExpressRouteGateway.Name -Name "testConnection" -ExpressRouteCircuitPeeringId $ExpressRouteCircuitPeeringId -RoutingWeight 20
-Get-AzExpressRouteConnection -ResourceGroupName $ExpressRouteGateway.ResourceGroupName -ParentResourceName $ExpressRouteGateway.Name -Name "testConnection"
+New-AzExpressRouteConnection -ResourceGroupName $ExpressRouteGateway.ResourceGroupName -ParentResourceId $ExpressRouteGateway.Id -Name "testConnection" -ExpressRouteCircuitPeeringId $ExpressRouteCircuitPeeringId -RoutingWeight 20
+Get-AzExpressRouteConnection -ResourceGroupName $ExpressRouteGateway.ResourceGroupName -ParentResourceId $ExpressRouteGateway.Id -Name "testConnection"
 ```
 
 ```output
@@ -88,7 +88,7 @@ Then it gets the connection using the connection name.
 ### Example 2
 
 ```powershell
-Get-AzExpressRouteConnection -ResourceGroupName ps9361 -ParentResourceName testExpressRoutegw -Name test*
+Get-AzExpressRouteConnection -ResourceGroupName ps9361 -ParentResourceId /subscriptions/{subscriptionId}/resourceGroups/ps9361/providers/Microsoft.Network/ExpressRouteGateways/testExpressRoutegw -Name test*
 ```
 
 ```output

src/Network/Network/help/Get-AzExpressRouteCrossConnectionArpTable.md

@@ -36,7 +36,7 @@ a particular peering. You can use the ARP table to validate layer 2 configuratio
 
 ### Example 1: Display the ARP table for an ExpressRoute peer
 ```powershell
-Get-AzExpressRouteCrossConnectionARPTable -ResourceGroupName $RG -ExpressRouteCrossConnectionName $CrossConnectionName -PeeringType MicrosoftPeering -DevicePath Primary
+Get-AzExpressRouteCrossConnectionARPTable -ResourceGroupName $RG -CrossConnectionName $CrossConnectionName -PeeringType MicrosoftPeering -DevicePath Primary
 ```
 
 ## PARAMETERS

src/Network/Network/help/Get-AzExpressRouteCrossConnectionRouteTable.md

@@ -37,7 +37,7 @@ connectivity.
 
 ### Example 1: Display the route table for the primary path
 ```powershell
-Get-AzExpressRouteCrossConnectionRouteTable -ResourceGroupName $RG -ExpressRouteCrossConnectionName $CircuitName -DevicePath 'Primary'
+Get-AzExpressRouteCrossConnectionRouteTable -ResourceGroupName $RG -CrossConnectionName $CircuitName -DevicePath 'Primary'
 ```
 
 ## PARAMETERS

src/Network/Network/help/Get-AzExpressRouteCrossConnectionRouteTableSummary.md

@@ -37,7 +37,7 @@ router.
 
 ### Example 1: Display the route summary for the primary path
 ```powershell
-Get-AzExpressRouteCrossConnectionRouteTableSummary -ResourceGroupName $RG -ExpressRouteCrossConnectionName $CrossConnectionName -DevicePath 'Primary'
+Get-AzExpressRouteCrossConnectionRouteTableSummary -ResourceGroupName $RG -CrossConnectionName $CrossConnectionName -DevicePath 'Primary'
 ```
 
 ## PARAMETERS

src/Network/Network/help/Get-AzNetworkInterfaceTapConfig.md

@@ -31,21 +31,21 @@ The **Get-AzNetworkInterfaceTapConfig** cmdlet gets an Azure Tap Configuration f
 
 ### Example 1: Get all tap configurations for a given network interface
 ```powershell
-Get-AzNetworkInterfaceTapConfig -ResourceGroupName "ResourceGroup1" -NetworkInterface "sourceNicName"
+Get-AzNetworkInterfaceTapConfig -ResourceGroupName "ResourceGroup1" -NetworkInterfaceName "sourceNicName"
 ```
 
 This command gets tap configurations added for the given network interface.
 
 ### Example 2: Get a given tap configuration
 ```powershell
-Get-AzNetworkInterface -ResourceGroupName "ResourceGroup1" -NetworkInterface "sourceNicName" -Name "tapconfigName"
+Get-AzNetworkInterface -ResourceGroupName "ResourceGroup1" -NetworkInterfaceName "sourceNicName" -Name "tapconfigName"
 ```
 
 This command gets specific tap configuration added for the given network interface.
 
 ### Example 3: Get a given tap configuration
 ```powershell
-Get-AzNetworkInterface -ResourceGroupName "ResourceGroup1" -NetworkInterface "sourceNicName" -Name "tapconfig*"
+Get-AzNetworkInterface -ResourceGroupName "ResourceGroup1" -NetworkInterfaceName "sourceNicName" -Name "tapconfig*"
 ```
 
 This command gets tap configurations added for the given network interface with name starting with "tapconfig".

src/Network/Network/help/Get-AzNetworkWatcher.md

@@ -30,7 +30,7 @@ The Get-AzNetworkWatcher cmdlet gets one or more Azure Network Watcher resources
 
 ### Example 1: Get a Network Watcher
 ```powershell
-Get-AzNetworkWatcher -Name NetworkWatcher_westcentralus -ResourceGroup NetworkWatcherRG
+Get-AzNetworkWatcher -Name NetworkWatcher_westcentralus -ResourceGroupName NetworkWatcherRG
 ```
 
 ```output

src/Network/Network/help/Get-AzNetworkWatcherNextHop.md

@@ -41,10 +41,10 @@ Next hop allows you to view the type of Azure resource, the associated IP addres
 
 ### Example 1: Get the Next Hop when communicating with an Internet IP
 ```powershell
-$nw = Get-AzResource | Where {$_.ResourceType -eq "Microsoft.Network/networkWatchers" -and $_.Location -eq "WestCentralUS" } 
+$nw = Get-AzResource | Where-Object {$_.ResourceType -eq "Microsoft.Network/networkWatchers" -and $_.Location -eq "WestCentralUS" } 
 $networkWatcher = Get-AzNetworkWatcher -Name $nw.Name -ResourceGroupName $nw.ResourceGroupName 
 $VM = Get-AzVM -ResourceGroupName ContosoResourceGroup -Name VM0
-$Nics = Get-AzNetworkInterface | Where {$_.Id -eq $vm.NetworkProfile.NetworkInterfaces.Id.ForEach({$_})}
+$Nics = Get-AzNetworkInterface | Where-Object {$_.Id -eq $vm.NetworkProfile.NetworkInterfaces.Id.ForEach({$_})}
 Get-AzNetworkWatcherNextHop -NetworkWatcher $networkWatcher -TargetVirtualMachineId $VM.Id -SourceIPAddress $nics[0].IpConfigurations[0].PrivateIpAddress  -DestinationIPAddress 204.79.197.200
 ```
 

src/Network/Network/help/Get-AzNetworkWatcherPacketCapture.md

@@ -37,14 +37,14 @@ The Get-AzNetworkWatcherPacketCapture gets the properties and status of a packet
 
 ### Example 1: Create a Packet Capture with multiple filters and retrieve its status
 ```powershell
-$nw = Get-AzResource | Where {$_.ResourceType -eq "Microsoft.Network/networkWatchers" -and $_.Location -eq "WestCentralUS" } 
+$nw = Get-AzResource | Where-Object {$_.ResourceType -eq "Microsoft.Network/networkWatchers" -and $_.Location -eq "WestCentralUS" } 
 $networkWatcher = Get-AzNetworkWatcher -Name $nw.Name -ResourceGroupName $nw.ResourceGroupName 
 
 $storageAccount = Get-AzStorageAccount -ResourceGroupName contosoResourceGroup -Name contosostorage123
 
 $filter1 = New-AzPacketCaptureFilterConfig -Protocol TCP -RemoteIPAddress "1.1.1.1-255.255.255" -LocalIPAddress "10.0.0.3" -LocalPort "1-65535" -RemotePort "20;80;443"
 $filter2 = New-AzPacketCaptureFilterConfig -Protocol UDP 
-New-AzNetworkWatcherPacketCapture -NetworkWatcher $networkWatcher -TargetVirtualMachineId $vm.Id -PacketCaptureName "PacketCaptureTest" -StorageAccountId $storageAccount.id -TimeLimitInSeconds 60 -Filters $filter1, $filter2
+New-AzNetworkWatcherPacketCapture -NetworkWatcher $networkWatcher -TargetVirtualMachineId $vm.Id -PacketCaptureName "PacketCaptureTest" -StorageAccountId $storageAccount.id -TimeLimitInSeconds 60 -Filter $filter1, $filter2
 
 Get-AzNetworkWatcherPacketCapture -NetworkWatcher $networkWatcher -PacketCaptureName "PacketCaptureTest"
 ```

src/Network/Network/help/Get-AzNetworkWatcherSecurityGroupView.md

@@ -37,7 +37,7 @@ The Get-AzNetworkWatcherSecurityGroupView enables you to view the configured and
 
 ### Example 1: Make a Security Group View call on a VM
 ```powershell
-$nw = Get-AzResource | Where {$_.ResourceType -eq "Microsoft.Network/networkWatchers" -and $_.Location -eq "WestCentralUS" } 
+$nw = Get-AzResource | Where-Object {$_.ResourceType -eq "Microsoft.Network/networkWatchers" -and $_.Location -eq "WestCentralUS" } 
 $networkWatcher = Get-AzNetworkWatcher -Name $nw.Name -ResourceGroupName $nw.ResourceGroupName 
 $VM = Get-AzVM -ResourceGroupName ContosoResourceGroup -Name VM0 
 Get-AzNetworkWatcherSecurityGroupView -NetworkWatcher $networkWatcher -TargetVirtualMachineId $VM.Id

src/Network/Network/help/Get-AzNetworkWatcherTopology.md

@@ -38,7 +38,7 @@ Note: If resources from multiple regions reside in the resource group, only the
 
 ### Example 1: Get an Azure Topology
 ```powershell
-$networkWatcher = Get-AzNetworkWatcher -Name NetworkWatcher_westcentralus -ResourceGroup NetworkWatcherRG 
+$networkWatcher = Get-AzNetworkWatcher -Name NetworkWatcher_westcentralus -ResourceGroupName NetworkWatcherRG 
 Get-AzNetworkWatcherTopology -NetworkWatcher $networkWatcher -ResourceGroupName testresourcegroup
 ```
 

src/Network/Network/help/Get-AzNetworkWatcherTroubleshootingResult.md

@@ -38,7 +38,7 @@ If the troubleshooting operation is currently in progress, then this operation m
 
 ### Example 1: Start Troubleshooting on a Virtual Network Gateway and Retrieve Result
 ```powershell
-$nw = Get-AzResource | Where {$_.ResourceType -eq "Microsoft.Network/networkWatchers" -and $_.Location -eq "WestCentralUS" } 
+$nw = Get-AzResource | Where-Object {$_.ResourceType -eq "Microsoft.Network/networkWatchers" -and $_.Location -eq "WestCentralUS" } 
 $networkWatcher = Get-AzNetworkWatcher -Name $nw.Name -ResourceGroupName $nw.ResourceGroupName 
 
 $target = '/subscriptions/bbbbbbbb-bbbb-bbbb-bbbb-bbbbbbbbbbbb/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/virtualNetworkGateways/{vnetGatewayName}'

src/Network/Network/help/Get-AzRouteServerPeerAdvertisedRoute.md

@@ -31,13 +31,13 @@ Given A route server peer either by name or by object, enumerate routes being ad
 
 ### Example 1
 ```powershell
-Get-AzRouteServerPeerAdvertisedRouter -ResourceGroupName $resourceGroupName -RouteServerName $routeServerName -PeerName $peerName
+Get-AzRouteServerPeerAdvertisedRoute -ResourceGroupName $resourceGroupName -RouteServerName $routeServerName -PeerName $peerName
 ```
 
 ### Example 2
 ```powershell
 $routeServerPeer = Get-AzRouteServerPeer -ResourceGroupName $resourceGroupName -RouteServerName $routeServerName -PeerName $peerName
-Get-AzRouteServerPeerAdvertisedRouter -InputObject $routeServerPeer
+Get-AzRouteServerPeerAdvertisedRoute -InputObject $routeServerPeer
 ```
 
 ## PARAMETERS

src/Network/Network/help/Get-AzRouteServerPeerLearnedRoute.md

@@ -31,13 +31,13 @@ Enumerate routes learned by a route server peer from other sources.
 
 ### Example 1
 ```powershell
-Get-AzRouteServerPeerLearnedRouter -ResourceGroupName $resourceGroupName -RouteServerName $routeServerName -PeerName $peerName
+Get-AzRouteServerPeerLearnedRoute -ResourceGroupName $resourceGroupName -RouteServerName $routeServerName -PeerName $peerName
 ```
 
 ### Example 2
 ```powershell
 $routerServerPeer = Get-AzRouteServerPeer -ResourceGroupName $resourceGroupName -RouteServerName $routeServerName -PeerName $peerName
-Get-AzRouteServerPeerLearnedRouter -InputObject $routerServerPeer
+Get-AzRouteServerPeerLearnedRoute -InputObject $routerServerPeer
 ```
 
 ## PARAMETERS