Is wifi monitor mode possible? #23
Comments
marcan
pushed a commit
that referenced
this issue
Oct 24, 2022
Fix port I/O string accessors such as `insb', `outsb', etc. which use the physical PCI port I/O address rather than the corresponding memory mapping to get at the requested location, which in turn breaks at least accesses made by our parport driver to a PCIe parallel port such as: PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20 parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] causing a memory access fault: Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008 Oops [#1] Modules linked in: CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23 Hardware name: SiFive HiFive Unmatched A00 (DT) epc : parport_pc_fifo_write_block_pio+0x266/0x416 ra : parport_pc_fifo_write_block_pio+0xb4/0x416 epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60 gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000 t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0 s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000 a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000 s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50 s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000 s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000 s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930 t5 : 0000000000001000 t6 : 0000000000040000 status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f [<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200 [<ffffffff8053bbc0>] parport_write+0x46/0xf8 [<ffffffff8050530e>] lp_write+0x158/0x2d2 [<ffffffff80185716>] vfs_write+0x8e/0x2c2 [<ffffffff80185a74>] ksys_write+0x52/0xc2 [<ffffffff80185af2>] sys_write+0xe/0x16 [<ffffffff80003770>] ret_from_syscall+0x0/0x2 ---[ end trace 0000000000000000 ]--- For simplicity address the problem by adding PCI_IOBASE to the physical address requested in the respective wrapper macros only, observing that the raw accessors such as `__insb', `__outsb', etc. are not supposed to be used other than by said macros. Remove the cast to `long' that is no longer needed on `addr' now that it is used as an offset from PCI_IOBASE and add parentheses around `addr' needed for predictable evaluation in macro expansion. No need to make said adjustments in separate changes given that current code is gravely broken and does not ever work. Signed-off-by: Maciej W. Rozycki <[email protected]> Fixes: fab957c ("RISC-V: Atomic and Locking Code") Cc: [email protected] # v4.15+ Reviewed-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
marcan
pushed a commit
that referenced
this issue
Mar 28, 2023
The UAF bug occurred because we were putting DFS root sessions in cifs_umount() while DFS cache refresher was being executed. Make DFS root sessions have same lifetime as DFS tcons so we can avoid the use-after-free bug is DFS cache refresher and other places that require IPCs to get new DFS referrals on. Also, get rid of mount group handling in DFS cache as we no longer need it. This fixes below use-after-free bug catched by KASAN [ 379.946955] BUG: KASAN: use-after-free in __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.947642] Read of size 8 at addr ffff888018f57030 by task kworker/u4:3/56 [ 379.948096] [ 379.948208] CPU: 0 PID: 56 Comm: kworker/u4:3 Not tainted 6.2.0-rc7-lku #23 [ 379.948661] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014 [ 379.949368] Workqueue: cifs-dfscache refresh_cache_worker [cifs] [ 379.949942] Call Trace: [ 379.950113] <TASK> [ 379.950260] dump_stack_lvl+0x50/0x67 [ 379.950510] print_report+0x16a/0x48e [ 379.950759] ? __virt_addr_valid+0xd8/0x160 [ 379.951040] ? __phys_addr+0x41/0x80 [ 379.951285] kasan_report+0xdb/0x110 [ 379.951533] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.952056] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.952585] __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.953096] ? __pfx___refresh_tcon.isra.0+0x10/0x10 [cifs] [ 379.953637] ? __pfx___mutex_lock+0x10/0x10 [ 379.953915] ? lock_release+0xb6/0x720 [ 379.954167] ? __pfx_lock_acquire+0x10/0x10 [ 379.954443] ? refresh_cache_worker+0x34e/0x6d0 [cifs] [ 379.954960] ? __pfx_wb_workfn+0x10/0x10 [ 379.955239] refresh_cache_worker+0x4ad/0x6d0 [cifs] [ 379.955755] ? __pfx_refresh_cache_worker+0x10/0x10 [cifs] [ 379.956323] ? __pfx_lock_acquired+0x10/0x10 [ 379.956615] ? read_word_at_a_time+0xe/0x20 [ 379.956898] ? lockdep_hardirqs_on_prepare+0x12/0x220 [ 379.957235] process_one_work+0x535/0x990 [ 379.957509] ? __pfx_process_one_work+0x10/0x10 [ 379.957812] ? lock_acquired+0xb7/0x5f0 [ 379.958069] ? __list_add_valid+0x37/0xd0 [ 379.958341] ? __list_add_valid+0x37/0xd0 [ 379.958611] worker_thread+0x8e/0x630 [ 379.958861] ? __pfx_worker_thread+0x10/0x10 [ 379.959148] kthread+0x17d/0x1b0 [ 379.959369] ? __pfx_kthread+0x10/0x10 [ 379.959630] ret_from_fork+0x2c/0x50 [ 379.959879] </TASK> Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Cc: [email protected] # 6.2 Signed-off-by: Steve French <[email protected]>
|
I tried monitor mode but it looks like it's broken (the data is corrupted after a while) and I have no good way to debug it. Monitor mode is very far down the priority list for WiFi stuff, so I'm going to close this for now. It's unfortunate just how poor a state |
jannau
pushed a commit
that referenced
this issue
Jun 15, 2024
[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ben Gainey <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Li Dong <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Paran Lee <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Tim Chen <[email protected]> Cc: Yanteng Si <[email protected]> Cc: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
jannau
pushed a commit
that referenced
this issue
Nov 2, 2024
[ Upstream commit ca9984c ] rxq contains a pointer to the device from where the redirect happened. Currently, the BPF program that was executed after a redirect via BPF_MAP_TYPE_DEVMAP* does not have it set. This is particularly bad since accessing ingress_ifindex, e.g. SEC("xdp") int prog(struct xdp_md *pkt) { return bpf_redirect_map(&dev_redirect_map, 0, 0); } SEC("xdp/devmap") int prog_after_redirect(struct xdp_md *pkt) { bpf_printk("ifindex %i", pkt->ingress_ifindex); return XDP_PASS; } depends on access to rxq, so a NULL pointer gets dereferenced: <1>[ 574.475170] BUG: kernel NULL pointer dereference, address: 0000000000000000 <1>[ 574.475188] #PF: supervisor read access in kernel mode <1>[ 574.475194] #PF: error_code(0x0000) - not-present page <6>[ 574.475199] PGD 0 P4D 0 <4>[ 574.475207] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI <4>[ 574.475217] CPU: 4 UID: 0 PID: 217 Comm: kworker/4:1 Not tainted 6.11.0-rc5-reduced-00859-g780801200300 #23 <4>[ 574.475226] Hardware name: Intel(R) Client Systems NUC13ANHi7/NUC13ANBi7, BIOS ANRPL357.0026.2023.0314.1458 03/14/2023 <4>[ 574.475231] Workqueue: mld mld_ifc_work <4>[ 574.475247] RIP: 0010:bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c <4>[ 574.475257] Code: cc cc cc cc cc cc cc 80 00 00 00 cc cc cc cc cc cc cc cc f3 0f 1e fa 0f 1f 44 00 00 66 90 55 48 89 e5 f3 0f 1e fa 48 8b 57 20 <48> 8b 52 00 8b 92 e0 00 00 00 48 bf f8 a6 d5 c4 5d a0 ff ff be 0b <4>[ 574.475263] RSP: 0018:ffffa62440280c98 EFLAGS: 00010206 <4>[ 574.475269] RAX: ffffa62440280cd8 RBX: 0000000000000001 RCX: 0000000000000000 <4>[ 574.475274] RDX: 0000000000000000 RSI: ffffa62440549048 RDI: ffffa62440280ce0 <4>[ 574.475278] RBP: ffffa62440280c98 R08: 0000000000000002 R09: 0000000000000001 <4>[ 574.475281] R10: ffffa05dc8b98000 R11: ffffa05f577fca40 R12: ffffa05dcab24000 <4>[ 574.475285] R13: ffffa62440280ce0 R14: ffffa62440549048 R15: ffffa62440549000 <4>[ 574.475289] FS: 0000000000000000(0000) GS:ffffa05f4f700000(0000) knlGS:0000000000000000 <4>[ 574.475294] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 574.475298] CR2: 0000000000000000 CR3: 000000025522e000 CR4: 0000000000f50ef0 <4>[ 574.475303] PKRU: 55555554 <4>[ 574.475306] Call Trace: <4>[ 574.475313] <IRQ> <4>[ 574.475318] ? __die+0x23/0x70 <4>[ 574.475329] ? page_fault_oops+0x180/0x4c0 <4>[ 574.475339] ? skb_pp_cow_data+0x34c/0x490 <4>[ 574.475346] ? kmem_cache_free+0x257/0x280 <4>[ 574.475357] ? exc_page_fault+0x67/0x150 <4>[ 574.475368] ? asm_exc_page_fault+0x26/0x30 <4>[ 574.475381] ? bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c <4>[ 574.475386] bq_xmit_all+0x158/0x420 <4>[ 574.475397] __dev_flush+0x30/0x90 <4>[ 574.475407] veth_poll+0x216/0x250 [veth] <4>[ 574.475421] __napi_poll+0x28/0x1c0 <4>[ 574.475430] net_rx_action+0x32d/0x3a0 <4>[ 574.475441] handle_softirqs+0xcb/0x2c0 <4>[ 574.475451] do_softirq+0x40/0x60 <4>[ 574.475458] </IRQ> <4>[ 574.475461] <TASK> <4>[ 574.475464] __local_bh_enable_ip+0x66/0x70 <4>[ 574.475471] __dev_queue_xmit+0x268/0xe40 <4>[ 574.475480] ? selinux_ip_postroute+0x213/0x420 <4>[ 574.475491] ? alloc_skb_with_frags+0x4a/0x1d0 <4>[ 574.475502] ip6_finish_output2+0x2be/0x640 <4>[ 574.475512] ? nf_hook_slow+0x42/0xf0 <4>[ 574.475521] ip6_finish_output+0x194/0x300 <4>[ 574.475529] ? __pfx_ip6_finish_output+0x10/0x10 <4>[ 574.475538] mld_sendpack+0x17c/0x240 <4>[ 574.475548] mld_ifc_work+0x192/0x410 <4>[ 574.475557] process_one_work+0x15d/0x380 <4>[ 574.475566] worker_thread+0x29d/0x3a0 <4>[ 574.475573] ? __pfx_worker_thread+0x10/0x10 <4>[ 574.475580] ? __pfx_worker_thread+0x10/0x10 <4>[ 574.475587] kthread+0xcd/0x100 <4>[ 574.475597] ? __pfx_kthread+0x10/0x10 <4>[ 574.475606] ret_from_fork+0x31/0x50 <4>[ 574.475615] ? __pfx_kthread+0x10/0x10 <4>[ 574.475623] ret_from_fork_asm+0x1a/0x30 <4>[ 574.475635] </TASK> <4>[ 574.475637] Modules linked in: veth br_netfilter bridge stp llc iwlmvm x86_pkg_temp_thermal iwlwifi efivarfs nvme nvme_core <4>[ 574.475662] CR2: 0000000000000000 <4>[ 574.475668] ---[ end trace 0000000000000000 ]--- Therefore, provide it to the program by setting rxq properly. Fixes: cb261b5 ("bpf: Run devmap xdp_prog on flush instead of bulk enqueue") Reviewed-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Florian Kauer <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Link: https://lore.kernel.org/r/20240911-devel-koalo-fix-ingress-ifindex-v4-1-5c643ae10258@linutronix.de Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
chadmed
pushed a commit
to chadmed/linux
that referenced
this issue
Jan 5, 2025
[ Upstream commit 146b6f1 ] Under certain kernel configurations when building with Clang/LLVM, the compiler does not generate a return or jump as the terminator instruction for ip_vs_protocol_init(), triggering the following objtool warning during build time: vmlinux.o: warning: objtool: ip_vs_protocol_init() falls through to next function __initstub__kmod_ip_vs_rr__935_123_ip_vs_rr_init6() At runtime, this either causes an oops when trying to load the ipvs module or a boot-time panic if ipvs is built-in. This same issue has been reported by the Intel kernel test robot previously. Digging deeper into both LLVM and the kernel code reveals this to be a undefined behavior problem. ip_vs_protocol_init() uses a on-stack buffer of 64 chars to store the registered protocol names and leaves it uninitialized after definition. The function calls strnlen() when concatenating protocol names into the buffer. With CONFIG_FORTIFY_SOURCE strnlen() performs an extra step to check whether the last byte of the input char buffer is a null character (commit 3009f89 ("fortify: Allow strlen() and strnlen() to pass compile-time known lengths")). This, together with possibly other configurations, cause the following IR to be generated: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr AsahiLinux#5 section ".init.text" align 16 !kcfi_type !29 { %1 = alloca [64 x i8], align 16 ... 14: ; preds = %11 %15 = getelementptr inbounds i8, ptr %1, i64 63 %16 = load i8, ptr %15, align 1 %17 = tail call i1 @llvm.is.constant.i8(i8 %16) %18 = icmp eq i8 %16, 0 %19 = select i1 %17, i1 %18, i1 false br i1 %19, label %20, label %23 20: ; preds = %14 %21 = call i64 @strlen(ptr noundef nonnull dereferenceable(1) %1) AsahiLinux#23 ... 23: ; preds = %14, %11, %20 %24 = call i64 @strnlen(ptr noundef nonnull dereferenceable(1) %1, i64 noundef 64) AsahiLinux#24 ... } The above code calculates the address of the last char in the buffer (value %15) and then loads from it (value %16). Because the buffer is never initialized, the LLVM GVN pass marks value %16 as undefined: %13 = getelementptr inbounds i8, ptr %1, i64 63 br i1 undef, label %14, label %17 This gives later passes (SCCP, in particular) more DCE opportunities by propagating the undef value further, and eventually removes everything after the load on the uninitialized stack location: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #0 section ".init.text" align 16 !kcfi_type !11 { %1 = alloca [64 x i8], align 16 ... 12: ; preds = %11 %13 = getelementptr inbounds i8, ptr %1, i64 63 unreachable } In this way, the generated native code will just fall through to the next function, as LLVM does not generate any code for the unreachable IR instruction and leaves the function without a terminator. Zero the on-stack buffer to avoid this possible UB. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Co-developed-by: Ruowen Qin <[email protected]> Signed-off-by: Ruowen Qin <[email protected]> Signed-off-by: Jinghao Jia <[email protected]> Acked-by: Julian Anastasov <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
jannau
pushed a commit
that referenced
this issue
Feb 9, 2025
When executing 'echo mem > /sys/power/state', the following deadlock occurs. Since there is output during the serial port entering the suspend process, the suspend will be interrupted, resulting in the nesting of locks. Therefore, use uart_port_lock_irq() instead of uart_port_unlock(). WARNING: inconsistent lock state 6.12.0-rc2-00002-g3c199ed5bd64-dirty #23 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. sh/494 [HC0[0]:SC0[0]:HE1:SE1] takes: c4db5850 (&port_lock_key){?.-.}-{3:3}, at: imx_uart_enable_wakeup+0x14/0x254 {IN-HARDIRQ-W} state was registered at: lock_acquire+0x104/0x348 _raw_spin_lock+0x48/0x84 imx_uart_int+0x14/0x4dc __handle_irq_event_percpu+0xac/0x2fc handle_irq_event_percpu+0xc/0x40 handle_irq_event+0x38/0x8c handle_fasteoi_irq+0xb4/0x1b8 handle_irq_desc+0x1c/0x2c gic_handle_irq+0x6c/0xa0 generic_handle_arch_irq+0x2c/0x64 call_with_stack+0x18/0x20 __irq_svc+0x9c/0xbc _raw_spin_unlock_irqrestore+0x2c/0x48 uart_write+0xd8/0x3a0 do_output_char+0x1a8/0x1e4 n_tty_write+0x224/0x440 file_tty_write.constprop.0+0x124/0x250 do_iter_readv_writev+0x100/0x1e0 vfs_writev+0xc4/0x448 do_writev+0x68/0xf8 ret_fast_syscall+0x0/0x1c irq event stamp: 31593 hardirqs last enabled at (31593): [<c1150e48>] _raw_spin_unlock_irqrestore+0x44/0x48 hardirqs last disabled at (31592): [<c07f32f0>] clk_enable_lock+0x60/0x120 softirqs last enabled at (30334): [<c012d1d4>] handle_softirqs+0x2cc/0x478 softirqs last disabled at (30325): [<c012d510>] __irq_exit_rcu+0x120/0x15c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&port_lock_key); <Interrupt> lock(&port_lock_key); Fixes: 3c199ed ("serial: imx: Grab port lock in imx_uart_enable_wakeup()") Signed-off-by: Xiaolei Wang <[email protected]> Reviewed-by: Lucas Stach <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hello,
M1 devices use
brcmfmacdriver for wifi and AFAIK that driver had monitor mode support for quite some time now but it depends on the chip firmware, so my question is do the chips on these devices support monitor mode? and if so do we need to do anything to enable it in the kernel?Regards
The text was updated successfully, but these errors were encountered: