Configuration

Config file

The configuration uses the JSONC file format and is named config or config.jsonc.

Valid directories for this file are:

• $XDG_CONFIG_HOME/waybar/
• ~/.config/waybar/
• ~/waybar/
• /etc/xdg/waybar/
• SYSCONFDIR/xdg/waybar (if SYSCONFDIR set at the build time differs from /etc, e.g. /usr/local/etc on BSD systems)

A good starting point is the default config.

Also a minimal example config can be found on the bottom of this page.

All valid options for the modules are listed on the modules page.

Bar Config

option	typeof	default	description
layer	string	bottom	Decide if the bar is displayed in front (top) of the windows or behind (bottom) them.
output	string	array
position	string	top	Bar position, can be top,bottom,left,right.
height	integer		Height to be used by the bar if possible, leave blank for a dynamic value.
width	integer		Width to be used by the bar if possible, leave blank for a dynamic value.
modules-left	array		Modules that will be displayed on the left.
modules-center	array		Modules that will be displayed in the center.
modules-right	array		Modules that will be displayed on the right.
margin	string		Margins value using the css format without units.
margin-<top|left|bottom|right>	integer		Margins value without units.
spacing	integer	4	Size of gaps in between of the different modules.
name	string		Optional name added as a CSS class, for styling multiple waybars.
mode	string		Selects one of the preconfigured display modes. This is an equivalent of the sway-bar(5) mode command and supports the same values: dock, hide, invisible, overlay. Note: hide and invisible modes may be not as useful without Sway IPC.
start_hidden	bool	false	Option to start the bar hidden.
modifier-reset	string	press	Defines the timing of modifier key to reset the bar visibility. To reset the visibility of the bar with the press of the modifier key use press. Use release to reset the visibility upon the release of the modifier key and only if no other action happened while the key was pressed. This prevents hiding the bar when the modifier is used to switch a workspace, change binding mode or start a keybinding.
exclusive	bool	true	Option to request an exclusive zone from the compositor. Disable this to allow drawing application windows underneath or on top of the bar. Disabled by default for overlay layer.
fixed-center	bool	true	Prefer fixed center position for the modules-center block. The center block will stay in the middle of the bar whenever possible. It can still be pushed around if other blocks need more space. When false, the center block is centered in the space between the left and right block.
passthrough	bool	false	Option to pass any pointer events to the window under the bar. Intended to be used with either top or overlay layers and without exclusive zone. Enabled by default for overlay layer.
ipc	bool	false	Option to subscribe to the Sway IPC bar configuration and visibility events and control waybar with swaymsg bar commands. Requires bar_id value from sway configuration to be either passed with the -b commandline argument or specified with the id option. See #1244 for the documentation and configuration examples.
id	string		bar_id for the Sway IPC. Use this if you need to override the value passed with the -b bar_id commandline argument for the specific bar instance.
include	array		Paths to additional configuration files. Each file can contain a single object with any of the bar configuration options. In case of duplicate options, the first defined value takes precedence, i.e. including file -> first included file -> etc. Nested includes are permitted, but make sure to avoid circular imports. For a multi-bar config, the include directive affects only current bar configuration object.
reload_style_on_change	bool	false	Option to enable reloading the css style if a modification is detected on the style sheet file or any imported css files.

Module Config

It's suggested not to have multiple configurations for the same mouse button. For example: on-click, on-double-click, on-triple-click are defined. When triple click is triggered the module will execute commands for on-click, on-double-click, on-triple-click sequentially because of Gdk provide such events.

option	typeof	default	description
on-click	string		Command to execute when you left click on the module
on-click-release	string		Command to execute when you release left button on module
on-double-click	string		Command to execute when you double left click on the module
on-triple-click	string		Command to execute when you triple left click on the module
on-click-middle	string		Command to execute when you middle click on the module using mousewheel
on-click-middle-release	string		Command to execute when you release mousewheel button on the module
on-double-click-middle	string		Command to execute when you double middle click on the module using mousewheel
on-triple-click-middle	string		Command to execute when you triple middle click on the module using mousewheel
on-click-right	string		Command to execute when you right click on the module
on-click-right-release	string		Command to execute when you release right button on the module
on-double-click-right	string		Command to execute when you double right click on the module
on-triple-click-right	string		Command to execute when you triple right click on the module
on-click-backward	string		Command to execute when you click on the module using mouse backward button
on-click-backward-release	string		Command to execute when you release mouse backward button on the module
on-double-click-backward	string		Command to execute when you double click on the module using mouse backward button
on-triple-click-backward	string		Command to execute when you triple click on the module using mouse backward button
on-click-forward	string		Command to execute when you click on the module using mouse forward button
on-click-forward-release	string		Command to execute when you release mouse forward button on the module using
on-double-click-forward	string		Command to execute when you double click on the module using mouse forward button
on-triple-click-forward	string		Command to execute when you triple click on the module using mouse forward button
on-scroll-up	string		Command to execute when you scroll up on the module with the mouse wheel
on-scroll-down	string		Command to execute when you scroll down on the module with the mouse wheel
on-scroll-left	string		Command to execute when you tilt the mouse wheel left on the module
on-scroll-right	string		Command to execute when you tilt the mouse wheel right on the module

Module actions config

It is possible to specify module actions (if the module supports them) under the "actions" block. Supported actions are described at the module definition pages. Example:

"clock": {
    "actions": {"on-click-right": "mode",
                "on-scroll-up": "shift_up",
                "on-scroll-down": "shift_down"
               }
}

Module format

You can use PangoMarkupFormat. e.g.

"format": "<span style=\"italic\">{}</span>"

If you use a unicode in the module format, you might encounter a scenario where Waybar displays information in the wrong direction. It's a unicode specification. Some of the ligatures can have "right-to-left" associated directional property. See Bidi algorithm basics.

"format": "{icon} {capacity}%",
"format-icons": ["ﱉ","ﱊ","ﱌ","ﱍ","ﱋ"]

It can be handled by the using special attributes. In the example {icon} is wrapped by the left-to-right property.

"format": "‫{icon}‬ {capacity}%",
"format-icons": ["ﱉ","ﱊ","ﱌ","ﱍ","ﱋ"]

Multiple instances of a module

If you want to have a second instance of a module, you can suffix it by a '#' and a custom name.

For example if you want a second battery module, you can add "battery#bat2" to your modules.

To configure the newly added module, you then also add a module configuration with the same name.

This could then look something like this (this is an incomplete example):

"modules-right": ["battery", "battery#bat2"],
"battery": {
    "bat": "BAT1"
},
"battery#bat2": {
    "bat": "BAT2"
}

To style in style.css use :

battery.bat2 {
    border-bottom: 2px solid #FFFFFF;
}

Minimal config

A minimal config file could look like this:

{
    "layer": "top",
    "modules-left": ["sway/workspaces", "sway/mode"],
    "modules-center": ["sway/window"],
    "modules-right": ["battery", "clock"],
    "sway/window": {
        "max-length": 50
    },
    "battery": {
        "format": "{capacity}% {icon}",
        "format-icons": ["", "", "", "", ""]
    },
    "clock": {
        "format-alt": "{:%a, %d. %b  %H:%M}"
    }
}

Multi output config

Limit a configuration to some outputs

{
    "layer": "top",
    "output": "eDP-1",
    "modules-left": ["sway/workspaces", "sway/mode"],
    //...
}

{
    "layer": "top",
    "output": ["eDP-1", "VGA"],
    "modules-left": ["sway/workspaces", "sway/mode"],
    //...
}

Configuration of multiple outputs

Don't specify an output to create multiple bars on the same screen

[{
    "layer": "top",
    "output": "eDP-1",
    "modules-left": ["sway/workspaces", "sway/mode"],
    //...
}, {
    "layer": "top",
    "output": "VGA",
    "modules-right": ["clock"],
    //...
}]

You can also exclude specific output(s) by using exclamation mark, for example:

[{
    "layer": "top",
    "output": "eDP-1",
    "modules-left": ["sway/workspaces", "sway/mode"],
    //...
}, {
    "layer": "top",
    "output": "!eDP-1",
    "modules-right": ["clock"],
    //...
}]

This will show the first bar on eDP-1, and the second bar on every output except eDP-1

Rotating modules

When positioning Waybar on the left or right side of the screen, sometimes it's useful to be able to rotate the contents of a module so the text runs vertically. This can be done using the "rotate" property of the module. Example:

{
    "clock": {
        "rotate": 90
    }
}

Valid options for the "rotate" property are: 0, 90, 180 and 270.

Share options for multiple bars

You probably want to share the same formatting and properties for repeated modules across bars. Put the shared configuration in another file, say, default-modules.json:

{
	"clock": {
		"tooltip-format": "<big>{:%Y %B}</big>\n<tt><small>{calendar}</small></tt>",
		"format": "{:%F %T}",
		"format-alt": "{:%F %T}",
		"interval": 1
	},

}

and just import it from config:

[{
	"layer": "top",
	"position": "bottom",
	"output": ["DP-1"],

	"include": [
		"~/.config/waybar/default-modules.json",
	],
	"modules-right": [
		"clock",
		"temperature",
	]
},
{
	"layer": "top",
	"position": "bottom",
	"output": ["HDMI-1"],

	"include": [
		"~/.config/waybar/default-modules.json",
	],
	"modules-right": [
		"clock",
	]

	"clock": {
		"on-click": "do_something",
	}
},
]

As you can see, you can add custom properties on top of the defaults. Local options get appended to the defaults. They override the default ones, if they already exist.

Styling Multiple Bars

Using the "name" field, you can call it from the style.css file, like this: (config file)

{
  "name": "bar1"
   // desired settings
} 

(config2 file)

{ 
 "name": "bar2"
 // desired settings
} 

In your style.css, you may want to call like this:

.bar1 { 
  font-family: Arimo Nerd Font;
  font-size: 16px;
} 
.bar2 {
  font-family: Roboto;
  font-size: 16px;
} 

If your bars share the same modules, you can specify like this:

window.bar1#waybar { 
  background-color: rgba(10, 9, 10, 0.87);
} 

window.bar2#waybar {
  background-color: transparent;
}