Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Both conflict were simple overlapping changes.

In the kaweth case, Eric Dumazet's skb_cow() bug fix overlapped the
conversion of the driver in net-next to use in-netdev stats.

Signed-off-by: David S. Miller <[email protected]>

Documentation/devicetree/bindings/pci/hisilicon-pcie.txt

@@ -44,13 +44,19 @@ Hip05 Example (note that Hip06 is the same except compatible):
 	};
 
 HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
+
+Some BIOSes place the host controller in a mode where it is ECAM
+compliant for all devices other than the root complex. In such cases,
+the host controller should be described as below.
+
 The properties and their meanings are identical to those described in
 host-generic-pci.txt except as listed below.
 
 Properties of the host controller node that differ from
 host-generic-pci.txt:
 
-- compatible     : Must be "hisilicon,pcie-almost-ecam"
+- compatible     : Must be "hisilicon,hip06-pcie-ecam", or
+		   "hisilicon,hip07-pcie-ecam"
 
 - reg            : Two entries: First the ECAM configuration space for any
 		   other bus underneath the root bus. Second, the base
@@ -59,7 +65,7 @@ host-generic-pci.txt:
 
 Example:
 	pcie0: pcie@a0090000 {
-		compatible = "hisilicon,pcie-almost-ecam";
+		compatible = "hisilicon,hip06-pcie-ecam";
 		reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM configuration space */
 		      <0 0xa0090000 0 0x10000>; /* host bridge registers */
 		bus-range = <0  31>;

MAINTAINERS

@@ -2592,12 +2592,26 @@ F:	include/uapi/linux/if_bonding.h
 
 BPF (Safe dynamic programs and tools)
 M:	Alexei Starovoitov <[email protected]>
+M:	Daniel Borkmann <[email protected]>
 L:	[email protected]
 L:	[email protected]
 S:	Supported
+F:	arch/x86/net/bpf_jit*
+F:	Documentation/networking/filter.txt
+F:	include/linux/bpf*
+F:	include/linux/filter.h
+F:	include/uapi/linux/bpf*
+F:	include/uapi/linux/filter.h
 F:	kernel/bpf/
-F:	tools/testing/selftests/bpf/
+F:	kernel/trace/bpf_trace.c
 F:	lib/test_bpf.c
+F:	net/bpf/
+F:	net/core/filter.c
+F:	net/sched/act_bpf.c
+F:	net/sched/cls_bpf.c
+F:	samples/bpf/
+F:	tools/net/bpf*
+F:	tools/testing/selftests/bpf/
 
 BROADCOM B44 10/100 ETHERNET DRIVER
 M:	Michael Chan <[email protected]>
@@ -8777,6 +8791,7 @@ W:	http://www.linuxfoundation.org/en/Net
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
+B:	mailto:[email protected]
 S:	Maintained
 F:	net/
 F:	include/net/
@@ -12491,7 +12506,6 @@ F:	drivers/clk/ti/
 F:	include/linux/clk/ti.h
 
 TI ETHERNET SWITCH DRIVER (CPSW)
-M:	Mugunthan V N <[email protected]>
 R:	Grygorii Strashko <[email protected]>
 L:	[email protected]
 L:	[email protected]

arch/powerpc/include/asm/exception-64s.h

@@ -236,9 +236,9 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
 	mtctr	reg;							\
 	bctr
 
-#define BRANCH_LINK_TO_FAR(reg, label)					\
-	__LOAD_FAR_HANDLER(reg, label);					\
-	mtctr	reg;							\
+#define BRANCH_LINK_TO_FAR(label)					\
+	__LOAD_FAR_HANDLER(r12, label);					\
+	mtctr	r12;							\
 	bctrl
 
 /*
@@ -265,7 +265,7 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
 #define BRANCH_TO_COMMON(reg, label)					\
 	b	label
 
-#define BRANCH_LINK_TO_FAR(reg, label)					\
+#define BRANCH_LINK_TO_FAR(label)					\
 	bl	label
 
 #define BRANCH_TO_KVM(reg, label)					\

arch/powerpc/kernel/entry_64.S

@@ -689,7 +689,7 @@ resume_kernel:
 
 	addi	r8,r1,INT_FRAME_SIZE	/* Get the kprobed function entry */
 
-	lwz	r3,GPR1(r1)
+	ld	r3,GPR1(r1)
 	subi	r3,r3,INT_FRAME_SIZE	/* dst: Allocate a trampoline exception frame */
 	mr	r4,r1			/* src:  current exception frame */
 	mr	r1,r3			/* Reroute the trampoline frame to r1 */
@@ -703,8 +703,8 @@ resume_kernel:
 	addi	r6,r6,8
 	bdnz	2b
 
-	/* Do real store operation to complete stwu */
-	lwz	r5,GPR1(r1)
+	/* Do real store operation to complete stdu */
+	ld	r5,GPR1(r1)
 	std	r8,0(r5)
 
 	/* Clear _TIF_EMULATE_STACK_STORE flag */

arch/powerpc/kernel/exceptions-64s.S

@@ -982,7 +982,7 @@ TRAMP_REAL_BEGIN(hmi_exception_early)
 	EXCEPTION_PROLOG_COMMON_2(PACA_EXGEN)
 	EXCEPTION_PROLOG_COMMON_3(0xe60)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	BRANCH_LINK_TO_FAR(r4, hmi_exception_realmode)
+	BRANCH_LINK_TO_FAR(hmi_exception_realmode) /* Function call ABI */
 	/* Windup the stack. */
 	/* Move original HSRR0 and HSRR1 into the respective regs */
 	ld	r9,_MSR(r1)

arch/s390/include/asm/pgtable.h

@@ -1051,6 +1051,8 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 {
 	if (!MACHINE_HAS_NX)
 		pte_val(entry) &= ~_PAGE_NOEXEC;
+	if (pte_present(entry))
+		pte_val(entry) &= ~_PAGE_UNUSED;
 	if (mm_has_pgste(mm))
 		ptep_set_pte_at(mm, addr, ptep, entry);
 	else

block/blk-mq.c

@@ -2928,8 +2928,17 @@ bool blk_mq_poll(struct request_queue *q, blk_qc_t cookie)
 	hctx = q->queue_hw_ctx[blk_qc_t_to_queue_num(cookie)];
 	if (!blk_qc_t_is_internal(cookie))
 		rq = blk_mq_tag_to_rq(hctx->tags, blk_qc_t_to_tag(cookie));
-	else
+	else {
 		rq = blk_mq_tag_to_rq(hctx->sched_tags, blk_qc_t_to_tag(cookie));
+		/*
+		 * With scheduling, if the request has completed, we'll
+		 * get a NULL return here, as we clear the sched tag when
+		 * that happens. The request still remains valid, like always,
+		 * so we should be safe with just the NULL check.
+		 */
+		if (!rq)
+			return false;
+	}
 
 	return __blk_mq_poll(hctx, rq);
 }

block/elevator.c

@@ -1098,12 +1098,20 @@ int elevator_change(struct request_queue *q, const char *name)
 }
 EXPORT_SYMBOL(elevator_change);
 
+static inline bool elv_support_iosched(struct request_queue *q)
+{
+	if (q->mq_ops && q->tag_set && (q->tag_set->flags &
+				BLK_MQ_F_NO_SCHED))
+		return false;
+	return true;
+}
+
 ssize_t elv_iosched_store(struct request_queue *q, const char *name,
 			  size_t count)
 {
 	int ret;
 
-	if (!(q->mq_ops || q->request_fn))
+	if (!(q->mq_ops || q->request_fn) || !elv_support_iosched(q))
 		return count;
 
 	ret = __elevator_change(q, name);
@@ -1135,7 +1143,7 @@ ssize_t elv_iosched_show(struct request_queue *q, char *name)
 			len += sprintf(name+len, "[%s] ", elv->elevator_name);
 			continue;
 		}
-		if (__e->uses_mq && q->mq_ops)
+		if (__e->uses_mq && q->mq_ops && elv_support_iosched(q))
 			len += sprintf(name+len, "%s ", __e->elevator_name);
 		else if (!__e->uses_mq && !q->mq_ops)
 			len += sprintf(name+len, "%s ", __e->elevator_name);

drivers/acpi/power.c

@@ -200,6 +200,7 @@ static int acpi_power_get_list_state(struct list_head *list, int *state)
 		return -EINVAL;
 
 	/* The state of the list is 'on' IFF all resources are 'on'. */
+	cur_state = 0;
 	list_for_each_entry(entry, list, node) {
 		struct acpi_power_resource *resource = entry->resource;
 		acpi_handle handle = resource->device.handle;

drivers/block/mtip32xx/mtip32xx.c

@@ -3969,7 +3969,7 @@ static int mtip_block_initialize(struct driver_data *dd)
 	dd->tags.reserved_tags = 1;
 	dd->tags.cmd_size = sizeof(struct mtip_cmd);
 	dd->tags.numa_node = dd->numa_node;
-	dd->tags.flags = BLK_MQ_F_SHOULD_MERGE;
+	dd->tags.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_NO_SCHED;
 	dd->tags.driver_data = dd;
 	dd->tags.timeout = MTIP_NCQ_CMD_TIMEOUT_MS;
 

drivers/clk/clk-stm32f4.c

@@ -429,6 +429,13 @@ static const struct clk_div_table pll_divp_table[] = {
 	{ 0, 2 }, { 1, 4 }, { 2, 6 }, { 3, 8 }, { 0 }
 };
 
+static const struct clk_div_table pll_divq_table[] = {
+	{ 2, 2 }, { 3, 3 }, { 4, 4 }, { 5, 5 }, { 6, 6 }, { 7, 7 },
+	{ 8, 8 }, { 9, 9 }, { 10, 10 }, { 11, 11 }, { 12, 12 }, { 13, 13 },
+	{ 14, 14 }, { 15, 15 },
+	{ 0 }
+};
+
 static const struct clk_div_table pll_divr_table[] = {
 	{ 2, 2 }, { 3, 3 }, { 4, 4 }, { 5, 5 }, { 6, 6 }, { 7, 7 }, { 0 }
 };
@@ -496,9 +503,9 @@ struct stm32f4_div_data {
 
 #define MAX_PLL_DIV 3
 static const struct stm32f4_div_data  div_data[MAX_PLL_DIV] = {
-	{ 16, 2, 0,			pll_divp_table	},
-	{ 24, 4, CLK_DIVIDER_ONE_BASED, NULL		},
-	{ 28, 3, 0,			pll_divr_table	},
+	{ 16, 2, 0, pll_divp_table },
+	{ 24, 4, 0, pll_divq_table },
+	{ 28, 3, 0, pll_divr_table },
 };
 
 struct stm32f4_pll_data {

drivers/clk/sunxi-ng/Kconfig

@@ -1,6 +1,7 @@
 config SUNXI_CCU
 	bool "Clock support for Allwinner SoCs"
 	depends on ARCH_SUNXI || COMPILE_TEST
+	select RESET_CONTROLLER
 	default ARCH_SUNXI
 
 if SUNXI_CCU
@@ -135,6 +136,7 @@ config SUN8I_V3S_CCU
 config SUN9I_A80_CCU
 	bool "Support for the Allwinner A80 CCU"
 	select SUNXI_CCU_DIV
+	select SUNXI_CCU_MULT
 	select SUNXI_CCU_GATE
 	select SUNXI_CCU_NKMP
 	select SUNXI_CCU_NM

drivers/clk/sunxi-ng/ccu-sun8i-a33.c

@@ -752,6 +752,13 @@ static const struct sunxi_ccu_desc sun8i_a33_ccu_desc = {
 	.num_resets	= ARRAY_SIZE(sun8i_a33_ccu_resets),
 };
 
+static struct ccu_pll_nb sun8i_a33_pll_cpu_nb = {
+	.common	= &pll_cpux_clk.common,
+	/* copy from pll_cpux_clk */
+	.enable	= BIT(31),
+	.lock	= BIT(28),
+};
+
 static struct ccu_mux_nb sun8i_a33_cpu_nb = {
 	.common		= &cpux_clk.common,
 	.cm		= &cpux_clk.mux,
@@ -783,6 +790,10 @@ static void __init sun8i_a33_ccu_setup(struct device_node *node)
 
 	sunxi_ccu_probe(node, reg, &sun8i_a33_ccu_desc);
 
+	/* Gate then ungate PLL CPU after any rate changes */
+	ccu_pll_notifier_register(&sun8i_a33_pll_cpu_nb);
+
+	/* Reparent CPU during PLL CPU rate changes */
 	ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
 				  &sun8i_a33_cpu_nb);
 }

drivers/clk/sunxi-ng/ccu_common.c

@@ -14,11 +14,13 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/iopoll.h>
 #include <linux/slab.h>
 
 #include "ccu_common.h"
+#include "ccu_gate.h"
 #include "ccu_reset.h"
 
 static DEFINE_SPINLOCK(ccu_lock);
@@ -39,6 +41,53 @@ void ccu_helper_wait_for_lock(struct ccu_common *common, u32 lock)
 	WARN_ON(readl_relaxed_poll_timeout(addr, reg, reg & lock, 100, 70000));
 }
 
+/*
+ * This clock notifier is called when the frequency of a PLL clock is
+ * changed. In common PLL designs, changes to the dividers take effect
+ * almost immediately, while changes to the multipliers (implemented
+ * as dividers in the feedback loop) take a few cycles to work into
+ * the feedback loop for the PLL to stablize.
+ *
+ * Sometimes when the PLL clock rate is changed, the decrease in the
+ * divider is too much for the decrease in the multiplier to catch up.
+ * The PLL clock rate will spike, and in some cases, might lock up
+ * completely.
+ *
+ * This notifier callback will gate and then ungate the clock,
+ * effectively resetting it, so it proceeds to work. Care must be
+ * taken to reparent consumers to other temporary clocks during the
+ * rate change, and that this notifier callback must be the first
+ * to be registered.
+ */
+static int ccu_pll_notifier_cb(struct notifier_block *nb,
+			       unsigned long event, void *data)
+{
+	struct ccu_pll_nb *pll = to_ccu_pll_nb(nb);
+	int ret = 0;
+
+	if (event != POST_RATE_CHANGE)
+		goto out;
+
+	ccu_gate_helper_disable(pll->common, pll->enable);
+
+	ret = ccu_gate_helper_enable(pll->common, pll->enable);
+	if (ret)
+		goto out;
+
+	ccu_helper_wait_for_lock(pll->common, pll->lock);
+
+out:
+	return notifier_from_errno(ret);
+}
+
+int ccu_pll_notifier_register(struct ccu_pll_nb *pll_nb)
+{
+	pll_nb->clk_nb.notifier_call = ccu_pll_notifier_cb;
+
+	return clk_notifier_register(pll_nb->common->hw.clk,
+				     &pll_nb->clk_nb);
+}
+
 int sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
 		    const struct sunxi_ccu_desc *desc)
 {

drivers/clk/sunxi-ng/ccu_common.h

@@ -83,6 +83,18 @@ struct sunxi_ccu_desc {
 
 void ccu_helper_wait_for_lock(struct ccu_common *common, u32 lock);
 
+struct ccu_pll_nb {
+	struct notifier_block	clk_nb;
+	struct ccu_common	*common;
+
+	u32	enable;
+	u32	lock;
+};
+
+#define to_ccu_pll_nb(_nb) container_of(_nb, struct ccu_pll_nb, clk_nb)
+
+int ccu_pll_notifier_register(struct ccu_pll_nb *pll_nb);
+
 int sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
 		    const struct sunxi_ccu_desc *desc);
 

drivers/hid/wacom_wac.c

@@ -2006,7 +2006,7 @@ static void wacom_wac_pen_event(struct hid_device *hdev, struct hid_field *field
 		return;
 	case HID_DG_TOOLSERIALNUMBER:
 		wacom_wac->serial[0] = (wacom_wac->serial[0] & ~0xFFFFFFFFULL);
-		wacom_wac->serial[0] |= value;
+		wacom_wac->serial[0] |= (__u32)value;
 		return;
 	case WACOM_HID_WD_SENSE:
 		wacom_wac->hid_data.sense_state = value;
@@ -2176,6 +2176,16 @@ static void wacom_wac_finger_usage_mapping(struct hid_device *hdev,
 		wacom_wac->hid_data.cc_index = field->index;
 		wacom_wac->hid_data.cc_value_index = usage->usage_index;
 		break;
+	case HID_DG_CONTACTID:
+		if ((field->logical_maximum - field->logical_minimum) < touch_max) {
+			/*
+			 * The HID descriptor for G11 sensors leaves logical
+			 * maximum set to '1' despite it being a multitouch
+			 * device. Override to a sensible number.
+			 */
+			field->logical_maximum = 255;
+		}
+		break;
 	}
 }