Setup frontend CI #139
Setup frontend CI #139
Conversation
WalkthroughA new GitHub Actions workflow Changes
Possibly related PRs
Suggested reviewers
Poem
🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
CodeRabbit Configuration File (
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Nitpick comments (5)
.github/workflows/test_frontend.yaml (5)
3-13: Consider expanding path filters for comprehensive frontend testingThe current path filter only watches
frontend/src/**, but there might be important frontend-related files outside this directory (e.g., configuration files, package.json, tests).Consider expanding the paths filter:
paths: - 'frontend/src/**' + - 'frontend/package.json' + - 'frontend/pnpm-lock.yaml' + - 'frontend/vite.config.*' + - 'frontend/playwright.config.*' + - 'frontend/vitest.config.*' + - 'frontend/tests/**'
19-25: Add timeout settings for CI stabilityConsider adding a timeout limit to prevent long-running jobs from consuming excessive resources.
Add timeout-minutes to the job:
frontend_tests: runs-on: ubuntu-latest + timeout-minutes: 30 defaults:
41-43: Optimize CI performance with Playwright browsers cachingConsider caching Playwright browsers to speed up CI runs.
Add cache step before installing browsers:
- name: Cache Playwright browsers uses: actions/cache@v4 with: path: ~/.cache/ms-playwright key: playwright-${{ runner.os }}-${{ hashFiles('**/pnpm-lock.yaml') }}
44-59: Enhance test result visibilityConsider adding test result reporting for better visibility of test outcomes in GitHub UI.
Add test reporting steps:
- name: Upload vitest results if: always() uses: actions/upload-artifact@v4 with: name: vitest-results path: ./frontend/coverage/ retention-days: 30 - name: Report test results uses: dorny/test-reporter@v1 if: always() with: name: Frontend Tests path: './frontend/junit.xml' reporter: jest-junit🧰 Tools
🪛 yamllint (1.35.1)
[error] 59-59: trailing spaces
(trailing-spaces)
59-59: Fix YAML formatting issuesThere are some minor YAML formatting issues to address:
- Line 59: Remove trailing spaces
- Line 69: Add newline at end of file
Also applies to: 69-69
🧰 Tools
🪛 yamllint (1.35.1)
[error] 59-59: trailing spaces
(trailing-spaces)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro (Legacy)
📒 Files selected for processing (1)
.github/workflows/test_frontend.yaml(1 hunks)
🧰 Additional context used
🪛 yamllint (1.35.1)
.github/workflows/test_frontend.yaml
[error] 59-59: trailing spaces
(trailing-spaces)
[error] 69-69: no new line character at the end of file
(new-line-at-end-of-file)
🔇 Additional comments (1)
.github/workflows/test_frontend.yaml (1)
1-69: Verify workflow uniqueness
Let's ensure this workflow doesn't duplicate existing frontend testing configurations.
✅ Verification successful
No duplicate frontend testing workflows found
After reviewing all GitHub workflow files in the repository, the test_frontend.yaml workflow is the only one handling frontend-related testing. Other workflows are dedicated to different components (Python, Scala, Docker builds, etc.) with no overlap in frontend testing responsibilities.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Check for other frontend-related workflows
fd -e yaml -e yml . .github/workflows/ --exec grep -l 'frontend\|svelte\|playwright\|vitest' {} \;
Length of output: 140
Script:
#!/bin/bash
# Let's do a more thorough check for any workflow files that might be related to frontend testing
# First, let's see all workflow files
fd -e yaml -e yml . .github/workflows/
# Then, let's check content of all workflow files for any testing-related keywords
fd -e yaml -e yml . .github/workflows/ --exec cat {} \;
Length of output: 15720
🧰 Tools
🪛 yamllint (1.35.1)
[error] 59-59: trailing spaces
(trailing-spaces)
[error] 69-69: no new line character at the end of file
(new-line-at-end-of-file)
.github/workflows/test_frontend.yaml
Outdated
| - name: Build project | ||
| run: pnpm build No newline at end of file |
There was a problem hiding this comment.
🛠️ Refactor suggestion
Consider moving build step before tests
The build step should ideally come before running tests to ensure we're testing the built artifacts.
Move the build step before the test steps in the workflow.
🧰 Tools
🪛 yamllint (1.35.1)
[error] 69-69: no new line character at the end of file
(new-line-at-end-of-file)
There was a problem hiding this comment.
Actionable comments posted: 0
♻️ Duplicate comments (1)
.github/workflows/test_frontend.yaml (1)
70-71:⚠️ Potential issueMove build step before tests
The build step should come before running tests to ensure we're testing the built artifacts.
Move the build step before the test steps, right after installing dependencies:
- name: Install dependencies run: pnpm install --frozen-lockfile + - name: Build project + run: pnpm build + - name: Install playwright browsers run: npx playwright install --with-deps🧰 Tools
🪛 yamllint (1.35.1)
[error] 71-71: no new line character at the end of file
(new-line-at-end-of-file)
🧹 Nitpick comments (4)
.github/workflows/test_frontend.yaml (4)
7-15: Consider removing.github/workflows/**from path filtersIncluding
.github/workflows/**in the path filters means this workflow will trigger when you modify the workflow file itself. This is usually unnecessary and can lead to redundant workflow runs.paths: - 'frontend/src/**' - - '.github/workflows/**'
31-32: Consider pinning pnpm versionWhile you're using a specific version of the action, it's good practice to also pin the pnpm version for reproducible builds.
- name: Setup pnpm uses: pnpm/[email protected] + with: + version: 8.x.x # Replace with your project's pnpm version
52-56: Consider adding test coverage reportingWhile you're running unit tests, it would be valuable to collect and report test coverage metrics. This helps track the quality of the test suite over time.
- name: Run unit tests (vitest) - run: pnpm test:unit + run: pnpm test:unit --coverage env: CI: true + - name: Upload coverage report + uses: actions/upload-artifact@v4 + if: always() + with: + name: coverage-report + path: coverage/ + retention-days: 30
71-71: Add newline at end of fileAdd a newline at the end of the file to follow YAML best practices and fix the linting error.
- name: Build project run: pnpm build +🧰 Tools
🪛 yamllint (1.35.1)
[error] 71-71: no new line character at the end of file
(new-line-at-end-of-file)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro (Legacy)
📒 Files selected for processing (1)
.github/workflows/test_frontend.yaml(1 hunks)
🧰 Additional context used
🪛 yamllint (1.35.1)
.github/workflows/test_frontend.yaml
[error] 61-61: trailing spaces
(trailing-spaces)
[error] 71-71: no new line character at the end of file
(new-line-at-end-of-file)
There was a problem hiding this comment.
Actionable comments posted: 2
🧹 Nitpick comments (2)
.github/workflows/test_frontend.yaml (2)
22-27: Implement npm caching to improve workflow performanceAdd npm cache using actions/setup-node's built-in caching:
- uses: actions/setup-node@v4 with: node-version: 20.x + cache: 'npm' + cache-dependency-path: './frontend/package-lock.json'
57-57: Fix formatting issues
- Remove trailing spaces on line 57
- Add newline at end of file
env: - CI: true + CI: true - name: Build project - run: npm run build \ No newline at end of file + run: npm run build +Also applies to: 67-67
🧰 Tools
🪛 yamllint (1.35.1)
[error] 57-57: trailing spaces
(trailing-spaces)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro (Legacy)
📒 Files selected for processing (1)
.github/workflows/test_frontend.yaml(1 hunks)
🧰 Additional context used
🪛 yamllint (1.35.1)
.github/workflows/test_frontend.yaml
[error] 57-57: trailing spaces
(trailing-spaces)
[error] 67-67: no new line character at the end of file
(new-line-at-end-of-file)
🔇 Additional comments (1)
.github/workflows/test_frontend.yaml (1)
66-67: Move build step before tests
The build step should come before running tests to ensure we're testing the built artifacts and catch build failures early.
Move this step before the test steps (before line 42).
🧰 Tools
🪛 yamllint (1.35.1)
[error] 67-67: no new line character at the end of file
(new-line-at-end-of-file)
.github/workflows/test_frontend.yaml
Outdated
| paths: | ||
| - 'frontend/src/**' | ||
| - '.github/workflows/**' | ||
| pull_request: | ||
| branches: | ||
| - main | ||
| paths: | ||
| - 'frontend/src/**' | ||
| - '.github/workflows/**' |
There was a problem hiding this comment.
🛠️ Refactor suggestion
Consider expanding path filters for comprehensive coverage
The current path filters might miss important frontend-related changes. Consider adding:
paths:
- 'frontend/src/**'
+ - 'frontend/package.json'
+ - 'frontend/package-lock.json'
+ - 'frontend/vite.config.js'
+ - 'frontend/vitest.config.js'
+ - 'frontend/playwright.config.js'
+ - 'frontend/tests/**'
- '.github/workflows/**'📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| paths: | |
| - 'frontend/src/**' | |
| - '.github/workflows/**' | |
| pull_request: | |
| branches: | |
| - main | |
| paths: | |
| - 'frontend/src/**' | |
| - '.github/workflows/**' | |
| paths: | |
| - 'frontend/src/**' | |
| - 'frontend/package.json' | |
| - 'frontend/package-lock.json' | |
| - 'frontend/vite.config.js' | |
| - 'frontend/vitest.config.js' | |
| - 'frontend/playwright.config.js' | |
| - 'frontend/tests/**' | |
| - '.github/workflows/**' | |
| pull_request: | |
| branches: | |
| - main | |
| paths: | |
| - 'frontend/src/**' | |
| - 'frontend/package.json' | |
| - 'frontend/package-lock.json' | |
| - 'frontend/vite.config.js' | |
| - 'frontend/vitest.config.js' | |
| - 'frontend/playwright.config.js' | |
| - 'frontend/tests/**' | |
| - '.github/workflows/**' |
.github/workflows/test_frontend.yaml
Outdated
| - name: Upload playwright report | ||
| uses: actions/upload-artifact@v4 | ||
| if: ${{ !cancelled() }} | ||
| with: | ||
| name: playwright-report | ||
| path: playwright-report/ | ||
| retention-days: 30 |
There was a problem hiding this comment.
💡 Codebase verification
Verified: Playwright report path is correct, but error handling can be improved
The suggested change to use if: always() && !cancelled() is valid and beneficial:
- The default Playwright report directory is indeed
playwright-report/relative to the project root (which isfrontend/in this case) - The current condition
if: ${{ !cancelled() }}only prevents upload on manual cancellation - Using
always()ensures reports are uploaded even when tests fail, which is crucial for debugging
- name: Upload playwright report
uses: actions/upload-artifact@v4
- if: ${{ !cancelled() }}
+ if: always() && !cancelled()
with:
name: playwright-report
path: playwright-report/
retention-days: 30🔗 Analysis chain
Verify playwright report path and add error handling
- Verify that the playwright report is generated at
playwright-report/relative to the working directory. - Consider adding error handling for test failures:
- name: Upload playwright report
uses: actions/upload-artifact@v4
- if: ${{ !cancelled() }}
+ if: always() && !cancelled()
with:
name: playwright-report
path: playwright-report/
retention-days: 30🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Verify the playwright configuration and report path
fd playwright.config.js | xargs cat | grep -A 5 "reporter:"
Length of output: 59
Script:
#!/bin/bash
# Let's try to find the playwright configuration file with a broader search
fd -e js -e ts -e mjs -e cjs playwright.config
Length of output: 78
Script:
#!/bin/bash
# Let's also check the package.json for playwright scripts and configuration
fd package.json | xargs cat | grep -A 5 -B 5 playwright
Length of output: 869
Script:
#!/bin/bash
# Check the workflow file to understand the test execution context
cat .github/workflows/test_frontend.yaml
Length of output: 1439
Script:
#!/bin/bash
# Let's check the playwright configuration file content
cat frontend/playwright.config.ts
Length of output: 318
Script:
#!/bin/bash
# Let's also check if there are any custom test result reporters being used
rg -A 5 "reporter:" frontend/
Length of output: 29
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Nitpick comments (2)
.github/workflows/test_frontend.yaml (2)
48-56: Consider adding NODE_ENV and test-specific environment variablesWhile
CI=trueis set, consider adding:
NODE_ENV=testfor proper test environment configuration- Any test-specific environment variables needed by the application
- name: Run unit tests (vitest) run: npm run test:unit env: CI: true + NODE_ENV: test - name: Run integration tests (playwright) run: npm run test:integration env: CI: true + NODE_ENV: test
57-57: Fix YAML formatting issuesThere are minor formatting issues in the file:
- Trailing spaces on line 57
- Missing newline at end of file
- + - name: Upload playwright report ... - name: Build project - run: npm run build \ No newline at end of file + run: npm run build +Also applies to: 67-67
🧰 Tools
🪛 yamllint (1.35.1)
[error] 57-57: trailing spaces
(trailing-spaces)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro (Legacy)
📒 Files selected for processing (1)
.github/workflows/test_frontend.yaml(1 hunks)
🧰 Additional context used
🪛 yamllint (1.35.1)
.github/workflows/test_frontend.yaml
[error] 57-57: trailing spaces
(trailing-spaces)
[error] 67-67: no new line character at the end of file
(new-line-at-end-of-file)
🔇 Additional comments (3)
.github/workflows/test_frontend.yaml (3)
7-15: Consider expanding path filters for comprehensive coverage
The current path filters might miss important frontend-related changes that could affect the build or tests.
17-20: LGTM: Efficient concurrency configuration
The concurrency settings are well-configured to prevent redundant runs and optimize CI resources.
66-67: Consider moving build step before tests
The build step should come before running tests to ensure we're testing the built artifacts.
🧰 Tools
🪛 yamllint (1.35.1)
[error] 67-67: no new line character at the end of file
(new-line-at-end-of-file)
.github/workflows/test_frontend.yaml
Outdated
| # - name: Lint project (prettier format and eslint) | ||
| # run: npm run lint |
There was a problem hiding this comment.
Enable linting step for code quality
The linting step is currently commented out. Linting is crucial for maintaining code quality and consistency. Consider enabling it to catch potential issues early.
Remove the comments to enable linting:
- # - name: Lint project (prettier format and eslint)
- # run: npm run lint
+ - name: Lint project (prettier format and eslint)
+ run: npm run lint📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| # - name: Lint project (prettier format and eslint) | |
| # run: npm run lint | |
| - name: Lint project (prettier format and eslint) | |
| run: npm run lint |
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (2)
.github/workflows/test_frontend.yaml (2)
39-70: Track and prioritize the disabled test stepsSeveral critical test steps are disabled pending various dependencies:
- Integration tests setup (lines 39-41)
- Type checking - ECharts issues (lines 43-45)
- Linting - needs prettier format (lines 47-49)
- Unit tests - API dependency (lines 51-55)
- Integration tests - API dependency (lines 57-61)
- Playwright report upload (lines 63-70)
These steps are essential for ensuring code quality and should be prioritized.
Would you like me to:
- Create GitHub issues to track each TODO?
- Help set up the API dependencies?
- Assist with fixing the type errors?
- Set up the prettier configuration?
🧰 Tools
🪛 yamllint (1.35.1)
[error] 62-62: trailing spaces
(trailing-spaces)
62-62: Fix YAML formatting issuesThere are two formatting issues to address:
- Remove trailing spaces on line 62
- Add a newline at the end of the file
# env: # CI: true - + # TODO: Disabled until `test:integration` is ran # - name: Upload playwright report # ... - name: Build project - run: npm run build \ No newline at end of file + run: npm run build +Also applies to: 73-73
🧰 Tools
🪛 yamllint (1.35.1)
[error] 62-62: trailing spaces
(trailing-spaces)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro (Legacy)
📒 Files selected for processing (1)
.github/workflows/test_frontend.yaml(1 hunks)
🧰 Additional context used
🪛 yamllint (1.35.1)
.github/workflows/test_frontend.yaml
[error] 62-62: trailing spaces
(trailing-spaces)
[error] 73-73: no new line character at the end of file
(new-line-at-end-of-file)
🔇 Additional comments (5)
.github/workflows/test_frontend.yaml (5)
7-15: Consider expanding path filters for comprehensive coverage
The current path filters might miss important frontend-related changes. Consider adding:
paths:
- 'frontend/src/**'
+ - 'frontend/package.json'
+ - 'frontend/package-lock.json'
+ - 'frontend/vite.config.js'
+ - 'frontend/vitest.config.js'
+ - 'frontend/playwright.config.js'
+ - 'frontend/tests/**'
- '.github/workflows/**'17-20: LGTM: Concurrency settings are well configured
The concurrency settings are properly configured to prevent redundant workflow runs and optimize CI resources.
21-27: LGTM: Job configuration is appropriate
The job configuration uses standard settings with the correct working directory for frontend tasks.
28-37: LGTM: Setup steps are well configured
The setup steps use the latest action versions and follow CI best practices with npm ci for deterministic installations.
72-73: Consider moving build step before tests
The build step should ideally come before running tests to ensure we're testing the built artifacts.
🧰 Tools
🪛 yamllint (1.35.1)
[error] 73-73: no new line character at the end of file
(new-line-at-end-of-file)
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (2)
.github/workflows/test_frontend.yaml (2)
39-70: Create tracking issues for test implementation blockersThe workflow has several disabled test steps with dependencies that need to be resolved:
- Type errors in ECharts need fixing for svelte-check
- Project-wide prettier formatting needed for linting
- API setup required for unit and integration tests
- Integration test setup needed for Playwright
Would you like me to help create GitHub issues to track these blockers? I can provide detailed implementation steps for each item.
🧰 Tools
🪛 yamllint (1.35.1)
[error] 62-62: trailing spaces
(trailing-spaces)
62-62: Fix YAML formatting issuesPlease fix the following formatting issues:
- Remove trailing spaces on line 62
- Add a newline at the end of the file
# env: # CI: true - + # TODO: Disabled until `test:integration` is ran # - name: Upload playwright report # ... - name: Build project - run: npm run build \ No newline at end of file + run: npm run build +Also applies to: 73-73
🧰 Tools
🪛 yamllint (1.35.1)
[error] 62-62: trailing spaces
(trailing-spaces)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro (Legacy)
📒 Files selected for processing (1)
.github/workflows/test_frontend.yaml(1 hunks)
🧰 Additional context used
🪛 yamllint (1.35.1)
.github/workflows/test_frontend.yaml
[error] 62-62: trailing spaces
(trailing-spaces)
[error] 73-73: no new line character at the end of file
(new-line-at-end-of-file)
🔇 Additional comments (5)
.github/workflows/test_frontend.yaml (5)
7-15: Consider expanding path filters for comprehensive coverage
The current path filters might miss important frontend-related changes.
17-20: LGTM: Concurrency settings are well configured
The concurrency settings will help optimize CI resources by canceling outdated runs.
21-27: LGTM: Job configuration is appropriate
The job configuration correctly sets up the environment for frontend testing.
28-37: LGTM: Setup steps are well configured
The setup steps use the latest action versions and appropriate commands for dependency installation.
72-73: Move build step before test steps
The build step should come before running tests to ensure we're testing the built artifacts.
🧰 Tools
🪛 yamllint (1.35.1)
[error] 73-73: no new line character at the end of file
(new-line-at-end-of-file)
…could probably scope to just this file)
…n package.json (i.e. merged PR #136 (if we do))
…ier project-wide)
sean-zlai
force-pushed
the
sean/frontend-ci
branch
from
ed921f4 to
2a52387
Compare
There was a problem hiding this comment.
Actionable comments posted: 0
♻️ Duplicate comments (2)
.github/workflows/test_frontend.yaml (2)
7-15: 🛠️ Refactor suggestionConsider expanding path filters for comprehensive coverage
The current path filters might miss important frontend-related changes.
Apply this diff to both
push.pathsandpull_request.paths:paths: - 'frontend/src/**' + - 'frontend/package.json' + - 'frontend/package-lock.json' + - 'frontend/vite.config.js' + - 'frontend/vitest.config.js' + - 'frontend/playwright.config.js' + - 'frontend/tests/**' - '.github/workflows/**'
72-73: 🛠️ Refactor suggestionMove build step before test steps
The build step should come before running tests to ensure we're testing the built artifacts.
Move the build step before the test steps in the workflow.
🧰 Tools
🪛 yamllint (1.35.1)
[error] 73-73: no new line character at the end of file
(new-line-at-end-of-file)
🧹 Nitpick comments (2)
.github/workflows/test_frontend.yaml (2)
39-70: Track and prioritize the disabled test stepsSeveral critical test steps are disabled pending various requirements:
- Integration tests and Playwright setup (lines 39-41, 63-70)
- Type checking - ECharts issues (lines 43-45)
- Linting - needs prettier format (lines 47-49)
- Unit and integration tests - API dependency (lines 51-62)
Would you like me to:
- Create GitHub issues to track each TODO?
- Help set up the API mock for tests?
- Provide ECharts type definitions?
- Generate a prettier configuration?
Note: Consider enabling the linting step with auto-fix disabled initially:
- # - name: Lint project (prettier format and eslint) - # run: npm run lint + - name: Lint project (eslint only) + run: npm run lint:check🧰 Tools
🪛 yamllint (1.35.1)
[error] 62-62: trailing spaces
(trailing-spaces)
62-62: Fix formatting issuesThere are two formatting issues to address:
- Trailing spaces on line 62
- Missing newline at end of file
Apply this diff:
# env: # CI: true - + # TODO: Disabled until `test:integration` is ran # - name: Upload playwright report # ... - name: Build project - run: npm run build \ No newline at end of file + run: npm run build +Also applies to: 73-73
🧰 Tools
🪛 yamllint (1.35.1)
[error] 62-62: trailing spaces
(trailing-spaces)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro (Legacy)
📒 Files selected for processing (1)
.github/workflows/test_frontend.yaml(1 hunks)
🧰 Additional context used
🪛 yamllint (1.35.1)
.github/workflows/test_frontend.yaml
[error] 62-62: trailing spaces
(trailing-spaces)
[error] 73-73: no new line character at the end of file
(new-line-at-end-of-file)
🔇 Additional comments (3)
.github/workflows/test_frontend.yaml (3)
17-20: LGTM! Efficient concurrency configuration
The concurrency settings are well configured to prevent queue buildup and save CI resources.
21-27: LGTM! Appropriate job configuration
The job configuration is well-structured with correct working directory setup.
28-37: LGTM! Secure and efficient setup steps
The setup steps follow best practices:
- Using latest action versions
- Using
npm cifor deterministic installations
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (3)
.github/workflows/test_frontend.yaml (3)
31-37: Add npm cache to improve workflow speedConsider adding npm caching to speed up dependency installation:
- name: Setup Node.js uses: actions/setup-node@v4 with: node-version: 20.x + cache: 'npm' + cache-dependency-path: './frontend/package-lock.json' - name: Install dependencies run: npm ci
39-69: Track disabled test stepsSeveral test steps are disabled with TODOs. Consider:
- Creating GitHub issues to track the pending work
- Adding links to the relevant issues in the TODO comments
- Adding estimated timeline for enabling these steps
This will help track progress and ensure these important test steps aren't forgotten.
Would you like me to help create GitHub issues for tracking these TODOs?
🧰 Tools
🪛 yamllint (1.35.1)
[error] 60-60: trailing spaces
(trailing-spaces)
60-71: Fix YAML formatting issuesPlease fix the following issues:
- Remove trailing spaces on line 60
- Add a newline at the end of the file
# env: # CI: true - + # TODO: Disabled until `test:integration` is ran # - name: Upload playwright report # uses: actions/upload-artifact@v4 # if: ${{ !cancelled() }} # with: # name: playwright-report # path: playwright-report/ # retention-days: 30 - name: Build project - run: npm run build + run: npm run build +🧰 Tools
🪛 yamllint (1.35.1)
[error] 60-60: trailing spaces
(trailing-spaces)
[error] 71-71: no new line character at the end of file
(new-line-at-end-of-file)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro (Legacy)
📒 Files selected for processing (2)
.github/workflows/test_frontend.yaml(1 hunks)frontend/.prettierignore(1 hunks)
✅ Files skipped from review due to trivial changes (1)
- frontend/.prettierignore
🧰 Additional context used
🪛 yamllint (1.35.1)
.github/workflows/test_frontend.yaml
[error] 60-60: trailing spaces
(trailing-spaces)
[error] 71-71: no new line character at the end of file
(new-line-at-end-of-file)
🔇 Additional comments (5)
.github/workflows/test_frontend.yaml (5)
7-15: Consider expanding path filters for comprehensive coverage
The current path filters might miss important frontend-related changes.
17-20: LGTM! Well-configured concurrency settings
The concurrency configuration is properly set up to prevent parallel runs and optimize resource usage.
21-27: LGTM! Job configuration is appropriate
The job configuration uses standard settings with a proper working directory setup.
43-47: LGTM! Essential checks are enabled
The Svelte check and lint steps are properly configured to catch type errors and maintain code quality.
70-71: Consider moving build step before tests
The build step should ideally come before running tests to ensure we're testing the built artifacts.
🧰 Tools
🪛 yamllint (1.35.1)
[error] 71-71: no new line character at the end of file
(new-line-at-end-of-file)
|
@ken-zlai enabled We'll enable unit (vitest) and integration (playwright) steps once we have better API separation |
## Summary
Setup CI workflow to run `check` (svelte-check / type errors), `lint`
(prettier format and eslint), and successfully build the project. We'll
enable `test:unit` (vitest) and `test:integration` (playwright) once
there is more API separation / setup.
## Checklist
- [ ] Added Unit Tests
- [ ] Covered by existing CI
- [ ] Integration tested
- [ ] Documentation update
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
- **New Features**
- Introduced a new GitHub Actions workflow for automated frontend
testing.
- **Chores**
- Configured the workflow to trigger on pushes and pull requests to the
main branch.
- Added steps for dependency installation and project build in the
workflow.
- Included setup for Playwright browsers and Svelte checks, with future
enhancements planned.
- Updated `.prettierignore` to exclude specific files and directories
from formatting.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
<!-- av pr metadata
This information is embedded by the av CLI when creating PRs to track
the status of stacks when using Aviator. Please do not delete or edit
this section of the PR.
```
{"parent":"main","parentHead":"","trunk":"main"}
```
-->
---------
Co-authored-by: Sean Lynch <[email protected]>
Summary
Setup CI workflow to run
check(svelte-check / type errors),lint(prettier format and eslint), and successfully build the project. We'll enabletest:unit(vitest) andtest:integration(playwright) once there is more API separation / setup.Checklist
Summary by CodeRabbit
.prettierignoreto exclude specific files and directories from formatting.