We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Im using XCAT management tool to manage my cluster.
Its XCAT version 2.16.5 and the operating system is AlmaLinux 8.7
Its been running without issues for more than a year.
For some reason running xcatprobe xcatmn -i ens192 , which suppose to check if xCAT has been installed correctly and is ready for use, fails.
xcatprobe xcatmn -i ens192
The error states as follow :
IP 10.1.100.80 of ens192 doesn't belong to any network defined in 'networks' table.
this is my networks table :
#netname,net,mask,mgtifname,gateway,dhcpserver,tftpserver,nameservers,ntpservers,logservers,dynamicrange,staticrange,staticrangeincrement,nodehostname,ddnsdomain,vlanid,domain,mtu,comments,disable "net10","10.0.0.0/8","255.0.0.0","ens192","10.1.1.1",,"<xcatmaster>","10.100.100.101,10.100.100.102",,"10.10.5.4","10.0.0.1-10.255.255.255",,,,,,"phys.local","1500",,
As far as i know 10.1.100.80 is part of 10.0.0.0/8
Running ip addr show ens192 :
ip addr show ens192
Im not sure where to start looking
Please advise
The text was updated successfully, but these errors were encountered:
You have to use 10.0.0.0 for networks.net, not 10.0.0.0/8. Netmask is defined in networks.mask. This should fix your issue :)
10.0.0.0
networks.net
10.0.0.0/8
networks.mask
Sorry, something went wrong.
No branches or pull requests
Im using XCAT management tool to manage my cluster.
Its XCAT version 2.16.5 and the operating system is AlmaLinux 8.7
Its been running without issues for more than a year.
For some reason running
xcatprobe xcatmn -i ens192
, which suppose to check if xCAT has been installed correctly and is ready for use, fails.The error states as follow :
this is my networks table :
As far as i know 10.1.100.80 is part of 10.0.0.0/8
Running
ip addr show ens192
:Im not sure where to start looking
Please advise
The text was updated successfully, but these errors were encountered: