gridfinity_baseplate.scad

// include instead of use, so we get the pitch
include <gridfinity_modules.scad>

xsize = 5;
ysize = 3;
weighted = false;
lid = false;

if (lid) {
  base_lid(xsize, ysize);
}
else if (weighted) {
  weighted_baseplate(xsize, ysize);
}
else {
  frame_plain(xsize, ysize);
}


module base_lid(num_x, num_y) {
  magnet_od = 6.5;
  magnet_position = min(gridfinity_pitch/2-8, gridfinity_pitch/2-4-magnet_od/2);
  magnet_thickness = 2.4;
  eps = 0.1;
  
  translate([0, 0, 7]) frame_plain(xsize, ysize, trim=0.25);
  difference() {
    grid_block(xsize, ysize, 1, magnet_diameter=0, screw_depth=0);
    gridcopy(num_x, num_y) {
      cornercopy(magnet_position) {
        translate([0, 0, 7-magnet_thickness])
        cylinder(d=magnet_od, h=magnet_thickness+eps, $fn=48);
      }
    }
  }
}


module weighted_baseplate(num_x, num_y) {
  magnet_od = 6.5;
  magnet_position = min(gridfinity_pitch/2-8, gridfinity_pitch/2-4-magnet_od/2);
  magnet_thickness = 2.4;
  eps = 0.1;
  
  difference() {
    frame_plain(num_x, num_y, 6.4);
    
    gridcopy(num_x, num_y) {
      cornercopy(magnet_position) {
        translate([0, 0, -magnet_thickness])
        cylinder(d=magnet_od, h=magnet_thickness+eps, $fn=48);
        
        translate([0, 0, -6.4]) cylinder(d=3.5, h=6.4, $fn=24);
        
        // counter-sunk holes in the bottom
        translate([0, 0, -6.41]) cylinder(d1=8.5, d2=3.5, h=2.5, $fn=24);
      }
      
      translate([-10.7, -10.7, -6.41]) cube([21.4, 21.4, 4.01]);
      
      for (a2=[0,90]) rotate([0, 0, a2])
      hull() for (a=[0, 180]) rotate([0, 0, a])
      translate([-14.9519, 0, -6.41]) cylinder(d=8.5, h=2.01, $fn=24);
    }
  }
}


module frame_plain(num_x, num_y, extra_down=0, trim=0) {
  ht = extra_down > 0 ? 4.4 : 5;
  corner_radius = 3.75;
  corner_position = gridfinity_pitch/2-corner_radius-trim;
  difference() {
    hull() cornercopy(corner_position, num_x, num_y) 
    translate([0, 0, -extra_down]) cylinder(r=corner_radius, h=ht+extra_down, $fn=44);
    translate([0, 0, trim ? 0 : -0.01]) 
    render() gridcopy(num_x, num_y) pad_oversize(margins=1);
  }
}