tuya circuit breaker support

[geedsen]

I have two tuya circuit breakers

But they only have three entities in HomeAssistant . But they support much more, Voltage, Current etc. of the three phases. is it difficult to implement these additional entities as well? Here a list of its features:

1.Remote control at anytime from anywhere

2.Schedule, countdown

3.Energy monitoring,You can view yearly, monthly, daily, and hourly consumption

4.You can view current(A), voltage(V), , Active power(KW), temperature of device, remaining energy(kwh) and total consumption in real time on your mobile phone

5.Separately display total forward active energy(kWh) and total reverse active energy(kWh). total reverse active energy(kWh) is mainly the energy generated by the solar power system

6.View the operation record

7. Set relay status ,let the device to be turned on or off after the power is restored

8.Clear energy

9.Childlock,Prevent children from misuse

10.Overload and short circuit protection,

11.Over voltage and under voltage protection,

12.Over current protection

13.Set over voltage,under voltage,over current ,,Temperature threshold values by app,

Once the real-time current/voltage reaches the threshold values,

The connected electrical appliances will be automatically turned off

14.Recharge,You can recharge, such as recharge 100kWh, the device will automatically calculate it, and when it is used up, the device will immediately shut down

And I just read about the Smart Life HA integration, they are not compatible, but does that mean they cannot be integrated both at the same time? And does the Smart Life integration support the same devices and the same entities?

[geedsen]

I think I am wrong....the "Car Charger' is a normal 220v socket. It looks like this device is not supported at all. Still my question remains, what is needed to build the support? I won't mind doing it myself as long as someone tells me that it is very doable. I have been developing software for over 40 years (C,C++,C#) so I would not mind helping out.