|
| 1 | +/* |
| 2 | + * Copyright (c) 2016 Andreas Färber |
| 3 | + * |
| 4 | + * This file is dual-licensed: you can use it either under the terms |
| 5 | + * of the GPL or the X11 license, at your option. Note that this dual |
| 6 | + * licensing only applies to this file, and not this project as a |
| 7 | + * whole. |
| 8 | + * |
| 9 | + * a) This library is free software; you can redistribute it and/or |
| 10 | + * modify it under the terms of the GNU General Public License as |
| 11 | + * published by the Free Software Foundation; either version 2 of the |
| 12 | + * License, or (at your option) any later version. |
| 13 | + * |
| 14 | + * This library is distributed in the hope that it will be useful, |
| 15 | + * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | + * GNU General Public License for more details. |
| 18 | + * |
| 19 | + * Or, alternatively, |
| 20 | + * |
| 21 | + * b) Permission is hereby granted, free of charge, to any person |
| 22 | + * obtaining a copy of this software and associated documentation |
| 23 | + * files (the "Software"), to deal in the Software without |
| 24 | + * restriction, including without limitation the rights to use, |
| 25 | + * copy, modify, merge, publish, distribute, sublicense, and/or |
| 26 | + * sell copies of the Software, and to permit persons to whom the |
| 27 | + * Software is furnished to do so, subject to the following |
| 28 | + * conditions: |
| 29 | + * |
| 30 | + * The above copyright notice and this permission notice shall be |
| 31 | + * included in all copies or substantial portions of the Software. |
| 32 | + * |
| 33 | + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 34 | + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 35 | + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 36 | + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 37 | + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 38 | + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 39 | + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 40 | + * OTHER DEALINGS IN THE SOFTWARE. |
| 41 | + */ |
| 42 | + |
| 43 | +#include <dt-bindings/gpio/gpio.h> |
| 44 | +#include <dt-bindings/interrupt-controller/irq.h> |
| 45 | +#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 46 | + |
| 47 | +/ { |
| 48 | + compatible = "amlogic,meson-gxbb"; |
| 49 | + interrupt-parent = <&gic>; |
| 50 | + #address-cells = <2>; |
| 51 | + #size-cells = <2>; |
| 52 | + |
| 53 | + aliases { |
| 54 | + serial0 = &uart_AO; |
| 55 | + serial1 = &uart_A; |
| 56 | + }; |
| 57 | + |
| 58 | + cpus { |
| 59 | + #address-cells = <0x2>; |
| 60 | + #size-cells = <0x0>; |
| 61 | + |
| 62 | + cpu0: cpu@0 { |
| 63 | + device_type = "cpu"; |
| 64 | + compatible = "arm,cortex-a53", "arm,armv8"; |
| 65 | + reg = <0x0 0x0>; |
| 66 | + enable-method = "psci"; |
| 67 | + }; |
| 68 | + |
| 69 | + cpu1: cpu@1 { |
| 70 | + device_type = "cpu"; |
| 71 | + compatible = "arm,cortex-a53", "arm,armv8"; |
| 72 | + reg = <0x0 0x1>; |
| 73 | + enable-method = "psci"; |
| 74 | + }; |
| 75 | + |
| 76 | + cpu2: cpu@2 { |
| 77 | + device_type = "cpu"; |
| 78 | + compatible = "arm,cortex-a53", "arm,armv8"; |
| 79 | + reg = <0x0 0x2>; |
| 80 | + enable-method = "psci"; |
| 81 | + }; |
| 82 | + |
| 83 | + cpu3: cpu@3 { |
| 84 | + device_type = "cpu"; |
| 85 | + compatible = "arm,cortex-a53", "arm,armv8"; |
| 86 | + reg = <0x0 0x3>; |
| 87 | + enable-method = "psci"; |
| 88 | + }; |
| 89 | + }; |
| 90 | + |
| 91 | + arm-pmu { |
| 92 | + compatible = "arm,cortex-a53-pmu"; |
| 93 | + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, |
| 94 | + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, |
| 95 | + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, |
| 96 | + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; |
| 97 | + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| 98 | + }; |
| 99 | + |
| 100 | + psci { |
| 101 | + compatible = "arm,psci-0.2"; |
| 102 | + method = "smc"; |
| 103 | + }; |
| 104 | + |
| 105 | + timer { |
| 106 | + compatible = "arm,armv8-timer"; |
| 107 | + interrupts = <GIC_PPI 13 |
| 108 | + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>, |
| 109 | + <GIC_PPI 14 |
| 110 | + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>, |
| 111 | + <GIC_PPI 11 |
| 112 | + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>, |
| 113 | + <GIC_PPI 10 |
| 114 | + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>; |
| 115 | + }; |
| 116 | + |
| 117 | + xtal: xtal-clk { |
| 118 | + compatible = "fixed-clock"; |
| 119 | + clock-frequency = <24000000>; |
| 120 | + clock-output-names = "xtal"; |
| 121 | + #clock-cells = <0>; |
| 122 | + }; |
| 123 | + |
| 124 | + soc { |
| 125 | + compatible = "simple-bus"; |
| 126 | + #address-cells = <2>; |
| 127 | + #size-cells = <2>; |
| 128 | + ranges; |
| 129 | + |
| 130 | + cbus: cbus@c1100000 { |
| 131 | + compatible = "simple-bus"; |
| 132 | + reg = <0x0 0xc1100000 0x0 0x100000>; |
| 133 | + #address-cells = <2>; |
| 134 | + #size-cells = <2>; |
| 135 | + ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; |
| 136 | + |
| 137 | + uart_A: serial@84c0 { |
| 138 | + compatible = "amlogic,meson-uart"; |
| 139 | + reg = <0x0 0x084c0 0x0 0x14>; |
| 140 | + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; |
| 141 | + clocks = <&xtal>; |
| 142 | + status = "disabled"; |
| 143 | + }; |
| 144 | + }; |
| 145 | + |
| 146 | + gic: interrupt-controller@c4301000 { |
| 147 | + compatible = "arm,gic-400"; |
| 148 | + reg = <0x0 0xc4301000 0 0x1000>, |
| 149 | + <0x0 0xc4302000 0 0x2000>, |
| 150 | + <0x0 0xc4304000 0 0x2000>, |
| 151 | + <0x0 0xc4306000 0 0x2000>; |
| 152 | + interrupt-controller; |
| 153 | + interrupts = <GIC_PPI 9 |
| 154 | + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; |
| 155 | + #interrupt-cells = <3>; |
| 156 | + #address-cells = <0>; |
| 157 | + }; |
| 158 | + |
| 159 | + aobus: aobus@c8100000 { |
| 160 | + compatible = "simple-bus"; |
| 161 | + reg = <0x0 0xc8100000 0x0 0x100000>; |
| 162 | + #address-cells = <2>; |
| 163 | + #size-cells = <2>; |
| 164 | + ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; |
| 165 | + |
| 166 | + uart_AO: serial@4c0 { |
| 167 | + compatible = "amlogic,meson-uart"; |
| 168 | + reg = <0x0 0x004c0 0x0 0x14>; |
| 169 | + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; |
| 170 | + clocks = <&xtal>; |
| 171 | + status = "disabled"; |
| 172 | + }; |
| 173 | + }; |
| 174 | + |
| 175 | + apb: apb@d0000000 { |
| 176 | + compatible = "simple-bus"; |
| 177 | + reg = <0x0 0xd0000000 0x0 0x200000>; |
| 178 | + #address-cells = <2>; |
| 179 | + #size-cells = <2>; |
| 180 | + ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; |
| 181 | + }; |
| 182 | + }; |
| 183 | +}; |
0 commit comments