Skip to content

hardenedbsd_FAQ

Jump to bottom
Loïc edited this page Mar 28, 2021 · 1 revision

Force the start of "memstick.img" in legacy mode

Some computers (example EeePC) may not allow you to disable priority booting in EFI mode and HardenedBSD may not boot properly for some unknown reason. One of the fastest solutions is to delete the EFI partition (ESP flag) which will normally force your computer to boot in legacy mode.

In this example, the EFI partition used on the HardenedBSD memstick is /dev/sdb1: Before with EFI

You just have to delete /dev/sdb1 so that the USB HardenedBSD key can only boot in legacy mode: After without EFI

Clone this wiki locally