This is a full sized ATX computer case you can laser cut (and probably cut using a CNC but I don't have one of those)
It should fit any ATX compliant motherboard, but I've only tried the one motherboard I have.
It has space for 3x 3.5" hard drives and a 2.5" hard drive, which are held by seperate 3d printed modules.
The entire design was done in Fusion 360. You can view it / download it here or use the LACC.f3z file attached.
- 5x sheets of 24" x 12" sheet of 1/8" or 3mm acrylic or MDF
- 26x M3 nuts
- 20x M3x16 screws (for holding case together)
- 6x M3x12 standoffs (for motherboard)
- 6x M3x4 screws (for standoffs)
- 2x 120mm Computer Fan
- 4x 6-32 screws for ATX power supply
- 2x of the 3.5" drive holder parts
- 2x of the 2.5" drive holder parts
- 6x M3x10 screws
- 6x M3 nuts
- Accurate Blank Motherboard & PCIe Card Models by subtec
- 120mm PC Case Fan by Ollie Keattch
- Power supply (mine)
- Hard Drive 2.5" and 3.5" (mine)
Creative Commons Attribution-ShareAlike 4.0 International
You are free to use, sell and remix freely as long as any modifications you make are also shared under this same license