temp compil

Author: FRASTM

boards.txt

@@ -174,7 +174,8 @@ Nucleo_144.menu.pnum.NUCLEO_L552ZE_Q.build.board=NUCLEO_L552ZE_Q
 Nucleo_144.menu.pnum.NUCLEO_L552ZE_Q.build.series=STM32L5xx
 Nucleo_144.menu.pnum.NUCLEO_L552ZE_Q.build.product_line=STM32L552xx
 Nucleo_144.menu.pnum.NUCLEO_L552ZE_Q.build.variant=NUCLEO_L552ZE_Q
-Nucleo_144.menu.pnum.NUCLEO_L552ZE_Q.build.cmsis_lib_gcc=arm_cortexM33lf_math
+Nucleo_144.menu.pnum.NUCLEO_L552ZE_Q.build.cmsis_lib_gcc=arm_cortexM4lf_math
+# Nucleo_144.menu.pnum.NUCLEO_L552ZE_Q.build.cmsis_lib_gcc=arm_ARMv8MMLldfsp_math
 
 # Upload menu
 Nucleo_144.menu.upload_method.MassStorage=Mass Storage

cores/arduino/pins_arduino.h

@@ -72,7 +72,7 @@ enum {
 // Anyway ADC internal channels are always avaialable.
 #if NUM_ANALOG_INPUTS > 0
 // Analog pins must be contiguous to be able to loop on each value
-#define MAX_ANALOG_INPUTS 24
+#define MAX_ANALOG_INPUTS 28
 _Static_assert(NUM_ANALOG_INPUTS <= MAX_ANALOG_INPUTS,
                "Core NUM_ANALOG_INPUTS limited to MAX_ANALOG_INPUTS");
 

variants/NUCLEO_L552ZE_Q/PeripheralPins.c

@@ -117,7 +117,8 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
 //*** TIM ***
 
 #ifdef HAL_TIM_MODULE_ENABLED
-WEAK const PinMap PinMap_TIM[] = {
+//WEAK const PinMap PinMap_TIM[] = {
+WEAK const PinMap PinMap_PWM[] = {
   {PA_0,       TIM2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
   {PA_0_ALT0,  TIM5,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
   {PA_1,       TIM2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2

variants/NUCLEO_L552ZE_Q/PinNamesVar.h

@@ -1,3 +1,6 @@
+#define ALT0 0
+#define ALT1 0
+#define ALT2 0
 /* Alternate pin name */
 PA_0_ALT0  = PA_0  | ALT0,
 PA_1_ALT0  = PA_1  | ALT0,