👷 Improve BIGTREE_GTR_V1_0 tests

Author: thinkyhead

buildroot/tests/BIGTREE_GTR_V1_0

@@ -27,7 +27,7 @@ opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT -1 \
         Z_DRIVER_TYPE A4988 Z2_DRIVER_TYPE A4988 Z3_DRIVER_TYPE A4988 Z4_DRIVER_TYPE A4988 \
         DEFAULT_Kp_LIST '{ 22.2, 20.0, 21.0, 19.0, 18.0 }' DEFAULT_Ki_LIST '{ 1.08 }' DEFAULT_Kd_LIST '{ 114.0, 112.0, 110.0, 108.0 }'
 opt_enable TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_MIGRATION_FEATURE TOOLCHANGE_FS_SLOW_FIRST_PRIME TOOLCHANGE_FS_PRIME_FIRST_USED \
-           PID_PARAMS_PER_HOTEND Z_MULTI_ENDSTOPS TC_GCODE_USE_GLOBAL_X TC_GCODE_USE_GLOBAL_Y
+           REPRAP_DISCOUNT_SMART_CONTROLLER PID_PARAMS_PER_HOTEND Z_MULTI_ENDSTOPS TC_GCODE_USE_GLOBAL_X TC_GCODE_USE_GLOBAL_Y
 exec_test $1 $2 "BigTreeTech GTR | 6 Extruders | Quad Z + Endstops" "$3"
 
 restore_configs
@@ -42,7 +42,7 @@ opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT -1 \
         MPC_AMBIENT_XFER_COEFF '{ 0.068f, 0.068f, 0.068f }' \
         MPC_AMBIENT_XFER_COEFF_FAN255 '{ 0.097f, 0.097f, 0.097f }' \
         FILAMENT_HEAT_CAPACITY_PERMM '{ 5.6e-3f, 3.6e-3f, 5.6e-3f }'
-opt_enable SWITCHING_TOOLHEAD TOOL_SENSOR MPCTEMP MPC_EDIT_MENU MPC_AUTOTUNE MPC_AUTOTUNE_MENU
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SWITCHING_TOOLHEAD TOOL_SENSOR MPCTEMP MPC_EDIT_MENU MPC_AUTOTUNE MPC_AUTOTUNE_MENU
 opt_disable PIDTEMP
 exec_test $1 $2 "BigTreeTech GTR | MPC | Switching Toolhead | Tool Sensors" "$3"