Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

brcmfmac firmware error kernel: brcmfmac: brcmf_sdio_htclk: HT Avail request error: -5 #1917

Open
samveen opened this issue Aug 22, 2024 · 1 comment
Open

brcmfmac firmware error kernel: brcmfmac: brcmf_sdio_htclk: HT Avail request error: -5 #1917

samveen opened this issue Aug 22, 2024 · 1 comment

Comments

@samveen
Copy link

samveen commented Aug 22, 2024 •
edited
Loading

My Zero2W had been up and running for close to 9 days, when the wifi firrmware gave errors and broke my connection to it today. With wifi connectivity shot, I triggered it's graceful shutdown to capture logs, and then booted it up again. I do not have more details than as below, as the log volume was large enough to exceed my log storage (log2ram lzo compressed ramdisk of 100M), and previous logs were rotated out.

All date and timestamps are IST (Kolkata +05:30) timezone.

The error messages I found (first, duplicate error lines, last; each kernel message misses the same error message multiple times, so actual number is much larger):

samveen@zero2w:~$ sudo journalctl -n 50000000 |grep -E 'brcmfmac: brcmf_sdio_htclk:|Missed [0-9]+ kernel messages' |head -n2
Aug 22 12:16:56 zero2w.cluster.samveen.in systemd-journald[454]: Missed 10 kernel messages
Aug 22 12:16:56 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_sdio_htclk: HT Avail request error: -5

samveen@zero2w:~$ sudo journalctl -n 50000000 |grep -E 'brcmfmac: brcmf_sdio_htclk:|Missed [0-9]+ kernel messages' |wc -l
28973

samveen@zero2w:~$ sudo journalctl -n 50000000 |grep -E 'brcmfmac: brcmf_sdio_htclk:|Missed [0-9]+ kernel messages' |tail -n2
Aug 22 12:37:07 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_sdio_htclk: HT Avail request error: -5
Aug 22 12:37:07 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_sdio_htclk: HT Avail request error: -5

EDIT
Another crash

Aug 22 17:49:59 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_sdio_isr: failed backplane access
Aug 22 17:49:59 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_sdio_readframes: RXHEADER FAILED: -110
Aug 22 17:49:59 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame, send NAK
Aug 22 17:49:59 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_sdio_isr: failed backplane access
Aug 22 17:50:02 zero2w.cluster.samveen.in kernel: ieee80211 phy0: brcmf_fw_crashed: Firmware has halted or crashed
Aug 22 17:50:02 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_sdio_bus_get_memdump: error -5 on reading 2048 membytes at 0x00000000
Aug 22 17:50:02 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_sdio_hostmail: Version mismatch, dongle reports 255, expecting 4
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_sdio_readshared: unable to obtain sdpcm_shared info: rv=-5 (addr=0x0)
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_sdio_hostmail: Unknown mailbox data content: 0xffffffff
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: ieee80211 phy0: brcmf_cfg80211_dump_station: BRCMF_C_GET_ASSOCLIST failed, err=-5
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_sdio_dpc: failed backplane access over SDIO, halting operation
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_sdio_dpc: failed backplane access over SDIO, halting operation
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do.
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-5)
Aug 22 17:50:05 zero2w.cluster.samveen.in wpa_supplicant[564]: wlan0: CTRL-EVENT-DISCONNECTED bssid=c0:06:c3:c2:d9:58 reason=1 locally_generated=1
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do.
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: ieee80211 phy0: brcmf_cfg80211_reg_notifier: Country code iovar returned err = -5
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do.
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: ieee80211 phy0: brcmf_cfg80211_reg_notifier: Country code iovar returned err = -5
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: mmc1: card 0001 removed
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: mmc1: new high speed SDIO card at address 0001
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: brcmfmac: F1 signature read @0x18000000=0x1541a9a6
Aug 22 17:50:05 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
Aug 22 17:50:06 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
Aug 22 17:50:06 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jun 14 2023 07:27:45 version 7.45.96.s1 (gf031a129) FWID 01-70bd2af7 es7
Aug 22 17:50:06 zero2w.cluster.samveen.in wpa_supplicant[564]: p2p-dev-wlan0: CTRL-EVENT-DSCP-POLICY clear_all
Aug 22 17:50:07 zero2w.cluster.samveen.in dbus-daemon[461]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.9' (uid=0 pid=563 comm="/usr/sbin/NetworkManager --no-daemon")
Aug 22 17:50:07 zero2w.cluster.samveen.in wpa_supplicant[564]: p2p-dev-wlan0: CTRL-EVENT-DSCP-POLICY clear_all
Aug 22 17:50:07 zero2w.cluster.samveen.in wpa_supplicant[564]: nl80211: deinit ifname=p2p-dev-wlan0 disabled_11b_rates=0
Aug 22 17:50:07 zero2w.cluster.samveen.in NetworkManager[563]: <warn>  [1724329207.3335] dns-sd-resolved[4464a2bfd4e5c34a]: send-updates SetLinkDomains@3 failed: GDBus Error:org.freedesktop.resolve1.NoSuchLink: Link 3 not known
Aug 22 17:50:07 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
Aug 22 17:50:07 zero2w.cluster.samveen.in wpa_supplicant[564]: Could not read interface p2p-dev-wlan0 flags: No such device
Aug 22 17:50:08 zero2w.cluster.samveen.in wpa_supplicant[564]: p2p-dev-wlan0: CTRL-EVENT-DSCP-POLICY clear_all
Aug 22 17:50:08 zero2w.cluster.samveen.in wpa_supplicant[564]: p2p-dev-wlan0: CTRL-EVENT-DSCP-POLICY clear_all
Aug 22 17:50:08 zero2w.cluster.samveen.in wpa_supplicant[564]: nl80211: deinit ifname=p2p-dev-wlan0 disabled_11b_rates=0
Aug 22 17:50:08 zero2w.cluster.samveen.in wpa_supplicant[564]: wlan0: CTRL-EVENT-DSCP-POLICY clear_all
Aug 22 17:50:08 zero2w.cluster.samveen.in wpa_supplicant[564]: wlan0: CTRL-EVENT-DSCP-POLICY clear_all
Aug 22 17:50:08 zero2w.cluster.samveen.in wpa_supplicant[564]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Aug 22 17:50:09 zero2w.cluster.samveen.in systemd[1]: Starting NetworkManager-dispatcher.service - Network Manager Script Dispatcher Service...
Aug 22 17:50:09 zero2w.cluster.samveen.in systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status...
Aug 22 17:50:11 zero2w.cluster.samveen.in dbus-daemon[461]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Aug 22 17:50:11 zero2w.cluster.samveen.in systemd[1]: Started NetworkManager-dispatcher.service - Network Manager Script Dispatcher Service.
Aug 22 17:50:11 zero2w.cluster.samveen.in kernel: warning: `iwconfig' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
Aug 22 17:50:12 zero2w.cluster.samveen.in systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status.
Aug 22 17:50:14 zero2w.cluster.samveen.in kernel: brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
Aug 22 17:50:14 zero2w.cluster.samveen.in wpa_supplicant[564]: wlan0: Trying to associate with SSID 'Guava'
Aug 22 17:50:15 zero2w.cluster.samveen.in wpa_supplicant[564]: wlan0: Associated with c0:06:c3:c2:d9:58
Aug 22 17:50:15 zero2w.cluster.samveen.in wpa_supplicant[564]: wlan0: CTRL-EVENT-CONNECTED - Connection to c0:06:c3:c2:d9:58 completed [id=0 id_str=]
Aug 22 17:50:15 zero2w.cluster.samveen.in wpa_supplicant[564]: wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
Aug 22 17:50:15 zero2w.cluster.samveen.in wpa_supplicant[564]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=IN
Aug 22 17:50:15 zero2w.cluster.samveen.in systemd-resolved[456]: wlan0: Bus client set search domain list to: guava.samveen.in
Aug 22 17:50:15 zero2w.cluster.samveen.in systemd-resolved[456]: wlan0: Bus client set default route setting: yes
Aug 22 17:50:15 zero2w.cluster.samveen.in systemd-resolved[456]: wlan0: Bus client set DNS server list to: 192.168.1.1
Aug 22 17:50:16 zero2w.cluster.samveen.in ModemManager[562]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/3f300000.mmcnr/mmc_host/mmc1/mmc1:0001/mmc1:0001:1': not supported by any plugin
Aug 22 17:50:18 zero2w.cluster.samveen.in systemd[1]: systemd-rfkill.service: Deactivated successfully.

Uptime:

samveen@zero2w:~$ last |grep reboot | head -n2 
reboot   system boot  6.6.31+rpt-rpi-v Thu Aug 22 14:03   still running
reboot   system boot  6.6.31+rpt-rpi-v Tue Aug 13 14:12 - 12:36 (8+22:24)

OS details:

samveen@zero2w:~$ uname -a && cat /etc/os-release
Linux zero2w.cluster.samveen.in 6.6.31+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.31-1+rpt1 (2024-05-29) aarch64 GNU/Linux
PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
NAME="Debian GNU/Linux"
VERSION_ID="12"
VERSION="12 (bookworm)"
VERSION_CODENAME=bookworm
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Firmware version:

samveen@zero2w:~$ apt list firmware-brcm80211 --installed && apt show firmware-brcm80211=1:20230625-2+rpt2  2>/dev/null |grep -E '^Package:|^Version:|^Status:|^Section:|^Source:|^Description:'
firmware-brcm80211/now 1:20230625-2+rpt2 all [installed,upgradable to: 1:20230625-2+rpt3]
^Description:'
Package: firmware-brcm80211
Version: 1:20230625-2+rpt2
Status: install ok installed
Section: non-free-firmware/kernel
Source: firmware-nonfree
Description: Binary firmware for Broadcom/Cypress 802.11 wireless cards

A newer update is available. I'll be installing it:

samveen@zero2w:~$ apt list firmware-brcm80211 --upgradable && apt show firmware-brcm80211  2>/dev/null |grep -E '^Package:|^Version:|^Status:|^Section:|^Source:|^Description:'
firmware-brcm80211/stable,stable 1:20230625-2+rpt3 all [upgradable from: 1:20230625-2+rpt2]
Package: firmware-brcm80211
Version: 1:20230625-2+rpt3
Section: non-free-firmware/kernel
Source: firmware-nonfree
Description: Binary firmware for Broadcom/Cypress 802.11 wireless cards

raspinfo output

samveen@zero2w:~$ raspinfo
System Information
------------------

Raspberry Pi Zero 2 W Rev 1.0
PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
NAME="Debian GNU/Linux"
VERSION_ID="12"
VERSION="12 (bookworm)"

Raspberry Pi reference 2022-04-04
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 27a8050c3c06e567c794620394a8c2d74262a516, stage2

Linux zero2w.cluster.samveen.in 6.6.31+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.31-1+rpt1 (2024-05-29) aarch64 GNU/Linux
Revision	: 902120
Serial		: 000000003e9c8e61
Model		: Raspberry Pi Zero 2 W Rev 1.0
Throttled flag  : throttled=0x0
Camera          : supported=0 detected=0, libcamera interfaces=0

Videocore information
---------------------

May 24 2024 15:31:41 
Copyright (c) 2012 Broadcom
version 4942b7633c0ff1af1ee95a51a33b56a9dae47529 (clean) (release) (start_cd)

alloc failures:     0
compactions:        0
legacy block fails: 0


Filesystem information
----------------------
Filesystem     1K-blocks     Used Available Use% Mounted on
udev              197148        0    197148   0% /dev
tmpfs              47612      864     46748   2% /run
/dev/mmcblk0p2  61096368 20509252  38073300  36% /
tmpfs             238056        0    238056   0% /dev/shm
tmpfs               5120        0      5120   0% /run/lock
/dev/mmcblk0p1    258095    44103    213992  18% /boot/firmware
tmpfs              47608        0     47608   0% /run/user/1001

Filename				Type		Size		Used		Priority
/var/swap                               file		970748		0		-2

Package version information
---------------------------
raspberrypi-ui-mods:
  Installed: (none)
raspberrypi-sys-mods:
  Installed: 20240624
openbox:
  Installed: (none)
lxpanel:
  Installed: (none)
pcmanfm:
  Installed: (none)
rpd-plym-splash:
  Installed: (none)

Networking Information
----------------------

eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet6 y::y.y.y.y  prefixlen 64  scopeid 0x20<link>
        ether m.m.m.m  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 185  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet x.x.x.x  netmask x.x.x.x
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 170  bytes 15495 (15.1 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 170  bytes 15495 (15.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet x.x.x.x  netmask x.x.x.x  broadcast x.x.x.x
        inet6 fd9c:aee2:y::y.y.y.y  prefixlen 128  scopeid 0x0<global>
        inet6 y.y.y.y.y.y.y.y  prefixlen 64  scopeid 0x0<global>
        inet6 y::y.y.y.y  prefixlen 64  scopeid 0x20<link>
        ether m.m.m.m  txqueuelen 1000  (Ethernet)
        RX packets 7915  bytes 2464738 (2.3 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 9687  bytes 5283967 (5.0 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


USB Information
---------------

/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M

Display Information
-------------------

Running Legacy framebuffer

Framebuffer: /dev/fb0

mode "720x480"
    geometry 720 480 720 480 16
    timings 0 0 0 0 0 0 0
    rgba 5/11,6/5,5/0,0/16
endmode

/usr/bin/raspinfo: line 103: tvservice: command not found

Audio Information
-------------------

aplay: device_list:274: no soundcards found...

null
    Discard all samples (playback) or generate zero samples (capture)

Unit pipewire.socket could not be found.
Unit pipewire.service could not be found.
Unit pulseaudio.service could not be found.
Unit pulseaudio.socket could not be found.

pactl not installed

config.txt
----------

aphy_params_current=819
arm_64bit=1
arm_freq=1000
arm_freq_min=600
audio_pwm_mode=514
auto_initramfs=1
camera_auto_detect=-1
config_hdmi_boost=5
core_freq=400
desired_osc_freq=0x331df0
disable_commandline_tags=2
disable_fw_kms_setup=-1
disable_l2cache=1
disable_overscan=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dphy_params_current=547
dvfs=3
enable_tvout=1
enable_uart=1
force_eeprom_read=1
force_pwm_open=1
framebuffer_depth=16
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=300
hdmi_enable_4kp60=-1
ignore_lcd=1
init_uart_clock=0x2dc6c00
max_framebuffers=2
over_voltage_avs=25000
pause_burst_frames=1
pciex4_reset=1
pmic_turbo_threshold=600
program_serial_random=1
sdram_freq=450
total_mem=512
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
hdmi_pixel_freq_limit:0=0x9a7ec80
device_tree=-
overlay_prefix=overlays/
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=

cmdline.txt
-----------
coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:9C:8E:61 vc_mem.mem_base=0x1fa00000 vc_mem.mem_size=0x20000000  console=tty1 console=ttyAMA0,115200 root=PARTUUID=d65d6b68-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=IN

pin configuration
-----------------

 0: ip    -- | hi // ID_SDA/GPIO0 = input
 1: ip    -- | hi // ID_SCL/GPIO1 = input
 2: a0    -- | hi // GPIO2 = SDA1
 3: a0    -- | hi // GPIO3 = SCL1
 4: ip    -- | hi // GPIO4 = input
 5: ip    -- | hi // GPIO5 = input
 6: ip    -- | hi // GPIO6 = input
 7: op -- -- | hi // GPIO7 = output
 8: op -- -- | hi // GPIO8 = output
 9: a0    -- | lo // GPIO9 = SPI0_MISO
10: a0    -- | lo // GPIO10 = SPI0_MOSI
11: a0    -- | lo // GPIO11 = SPI0_SCLK
12: ip    -- | lo // GPIO12 = input
13: op -- -- | hi // GPIO13 = output
14: a0    -- | hi // GPIO14 = TXD0
15: a0    -- | hi // GPIO15 = RXD0
16: op -- -- | hi // GPIO16 = output
17: op -- -- | hi // GPIO17 = output
18: op -- -- | hi // GPIO18 = output
19: a4    -- | lo // GPIO19 = SPI1_MISO
20: a4    -- | lo // GPIO20 = SPI1_MOSI
21: a4    -- | lo // GPIO21 = SPI1_SCLK
22: ip    -- | lo // GPIO22 = input
23: ip    -- | lo // GPIO23 = input
24: ip    -- | lo // GPIO24 = input
25: ip    -- | hi // GPIO25 = input
26: op -- -- | hi // GPIO26 = output
27: ip    -- | lo // GPIO27 = input
28: ip    -- | hi // HDMI_HPD_N/GPIO28 = input
29: op -- -- | hi // STATUS_LED_N/GPIO29 = output
30: ip    -- | hi // CTS0/GPIO30 = input
31: ip    -- | hi // RTS0/GPIO31 = input
32: ip    -- | hi // TXD0/GPIO32 = input
33: ip    -- | hi // RXD0/GPIO33 = input
34: a3    -- | lo // SD1_CLK/GPIO34 = SD1_CLK
35: a3    -- | hi // SD1_CMD/GPIO35 = SD1_CMD
36: a3    -- | hi // SD1_DATA0/GPIO36 = SD1_DAT0
37: a3    -- | hi // SD1_DATA1/GPIO37 = SD1_DAT1
38: a3    -- | hi // SD1_DATA2/GPIO38 = SD1_DAT2
39: a3    -- | hi // SD1_DATA3/GPIO39 = SD1_DAT3
40: op -- -- | lo // CAM_GPIO1/GPIO40 = output
41: op -- -- | hi // WL_ON/GPIO41 = output
42: op -- -- | lo // BT_ON/GPIO42 = output
43: a0    -- | hi // WIFI_CLK/GPIO43 = GPCLK2
44: ip    -- | hi // SDA0/GPIO44 = input
45: ip    -- | hi // SCL0/GPIO45 = input
46: ip    -- | hi // SMPS_SCL/GPIO46 = input
47: op -- -- | hi // SMPS_SDA/GPIO47 = output
48: a0    -- | lo // SD_CLK_R/GPIO48 = SD0_CLK
49: a0    -- | hi // SD_CMD_R/GPIO49 = SD0_CMD
50: a0    -- | lo // SD_DATA0_R/GPIO50 = SD0_DAT0
51: a0    -- | lo // SD_DATA1_R/GPIO51 = SD0_DAT1
52: a0    -- | lo // SD_DATA2_R/GPIO52 = SD0_DAT2
53: a0    -- | lo // SD_DATA3_R/GPIO53 = SD0_DAT3

vcdbg log messages
------------------

Fatal error: Could not determine logs location from Device Tree

dmesg log
---------

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.6.31+rpt-rpi-v8 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.31-1+rpt1 (2024-05-29)
[    0.000000] KASLR enabled
[    0.000000] random: crng init done
[    0.000000] Machine model: Raspberry Pi Zero 2 W Rev 1.0
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x000000001a400000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: 0x000000001a400000..0x000000001e3fffff (65536 KiB) map reusable linux,cma
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000001effffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000001effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001effffff]
[    0.000000] On node 0, zone DMA: 4096 pages in unavailable ranges
[    0.000000] percpu: Embedded 30 pages/cpu s85672 r8192 d29016 u122880
[    0.000000] pcpu-alloc: s85672 r8192 d29016 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] CPU features: detected: ARM erratum 843419
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x1fa00000 vc_mem.mem_size=0x20000000  console=tty1 console=ttyAMA0,115200 root=PARTUUID=d65d6b68-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=IN
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 124992
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 394300K/507904K available (13376K kernel code, 2210K rwdata, 4264K rodata, 4864K init, 1083K bss, 48068K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 43180 entries in 169 pages
[    0.000000] ftrace: allocated 169 pages with 4 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000390] Console: colour dummy device 80x25
[    0.000407] printk: console [tty1] enabled
[    0.001313] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[    0.001361] pid_max: default: 32768 minimum: 301
[    0.001476] LSM: initializing lsm=capability,integrity
[    0.001730] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.001777] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.002798] cgroup: Disabling memory control group subsystem
[    0.004825] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.005000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.005150] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.005504] rcu: Hierarchical SRCU implementation.
[    0.005530] rcu: 	Max phase no-delay instances is 1000.
[    0.007652] EFI services will not be available.
[    0.008136] smp: Bringing up secondary CPUs ...
[    0.008931] Detected VIPT I-cache on CPU1
[    0.009086] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.009967] Detected VIPT I-cache on CPU2
[    0.010075] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.010880] Detected VIPT I-cache on CPU3
[    0.010979] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.011097] smp: Brought up 1 node, 4 CPUs
[    0.011228] SMP: Total of 4 processors activated.
[    0.011253] CPU features: detected: 32-bit EL0 Support
[    0.011274] CPU features: detected: 32-bit EL1 Support
[    0.011298] CPU features: detected: CRC32 instructions
[    0.011437] CPU: All CPU(s) started at EL2
[    0.011472] alternatives: applying system-wide alternatives
[    0.014340] devtmpfs: initialized
[    0.027254] Enabled cp15_barrier support
[    0.027319] Enabled setend support
[    0.027559] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.027613] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030821] pinctrl core: initialized pinctrl subsystem
[    0.031598] DMI not present or invalid.
[    0.032271] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.039647] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.040050] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.040648] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.040776] audit: initializing netlink subsys (disabled)
[    0.041128] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[    0.041939] thermal_sys: Registered thermal governor 'step_wise'
[    0.042004] cpuidle: using governor menu
[    0.042341] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.042512] ASID allocator initialised with 32768 entries
[    0.043640] Serial: AMBA PL011 UART driver
[    0.049598] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.060942] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-05-24T15:31:41, variant start_cd
[    0.064963] raspberrypi-firmware soc:firmware: Firmware hash is 4942b7633c0ff1af1ee95a51a33b56a9dae47529
[    0.072729] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[    0.072767] Modules: 0 pages in range for non-PLT usage
[    0.072775] Modules: 517792 pages in range for PLT usage
[    0.077211] bcm2835-dma 3f007000.dma-controller: DMA legacy API manager, dmachans=0x1
[    0.078788] iommu: Default domain type: Translated
[    0.078817] iommu: DMA domain TLB invalidation policy: strict mode
[    0.080612] SCSI subsystem initialized
[    0.080898] usbcore: registered new interface driver usbfs
[    0.080969] usbcore: registered new interface driver hub
[    0.081056] usbcore: registered new device driver usb
[    0.081535] pps_core: LinuxPPS API ver. 1 registered
[    0.081561] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.081612] PTP clock support registered
[    0.083178] vgaarb: loaded
[    0.083825] clocksource: Switched to clocksource arch_sys_counter
[    1.704600] VFS: Disk quotas dquot_6.6.0
[    1.704700] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.704865] FS-Cache: Loaded
[    1.705175] CacheFiles: Loaded
[    1.716469] NET: Registered PF_INET protocol family
[    1.716782] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.718212] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    1.718271] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.718317] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.718411] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    1.718618] TCP: Hash tables configured (established 4096 bind 4096)
[    1.718917] MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear)
[    1.719007] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.719062] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.719278] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.719943] RPC: Registered named UNIX socket transport module.
[    1.719975] RPC: Registered udp transport module.
[    1.719996] RPC: Registered tcp transport module.
[    1.720016] RPC: Registered tcp-with-tls transport module.
[    1.720038] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.720085] PCI: CLS 0 bytes, default 64
[    1.720815] Trying to unpack rootfs image as initramfs...
[    1.724067] kvm [1]: IPA Size Limit: 40 bits
[    1.725888] kvm [1]: Hyp mode initialized successfully
[    1.729968] Initialise system trusted keyrings
[    1.730452] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    1.730574] zbud: loaded
[    1.731710] NFS: Registering the id_resolver key type
[    1.731786] Key type id_resolver registered
[    1.731858] Key type id_legacy registered
[    1.731908] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.731937] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.732873] Key type asymmetric registered
[    1.732919] Asymmetric key parser 'x509' registered
[    1.733013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.733359] io scheduler mq-deadline registered
[    1.733395] io scheduler kyber registered
[    1.733465] io scheduler bfq registered
[    1.736186] pinctrl-bcm2835 3f200000.gpio: GPIO_OUT persistence: yes
[    1.738155] bcm2708_fb soc:fb: FB found 1 display(s)
[    1.746543] Console: switching to colour frame buffer device 90x30
[    1.750294] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 720x480
[    1.755908] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    1.759756] bcm2835-rng 3f104000.rng: hwrng registered
[    1.761564] vc-mem: phys_addr:0x00000000 mem_base=0x1fa00000 mem_size:0x20000000(512 MiB)
[    1.784532] brd: module loaded
[    1.796534] loop: module loaded
[    1.798608] Loading iSCSI transport class v2.0-870.
[    1.805673] usbcore: registered new device driver r8152-cfgselector
[    1.806930] usbcore: registered new interface driver r8152
[    1.808199] usbcore: registered new interface driver lan78xx
[    1.809396] usbcore: registered new interface driver smsc95xx
[    1.810887] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    2.540570] Core Release: 2.80a
[    2.541694] Setting default values for core params
[    2.542786] Finished setting default values for core params
[    2.636208] Freeing initrd memory: 11416K
[    2.744328] Using Buffer DMA mode
[    2.745325] Periodic Transfer Interrupt Enhancement - disabled
[    2.746339] Multiprocessor Interrupt Enhancement - disabled
[    2.747371] OTG VER PARAM: 0, OTG VER FLAG: 0
[    2.748440] Dedicated Tx FIFOs mode

[    2.750078] WARN::dwc_otg_hcd_init:1072: FIQ DMA bounce buffers: virt = ffffffc080cfb000 dma = 0x00000000da810000 len=9024
[    2.753169] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    2.757963] dwc_otg: Microframe scheduler enabled

[    2.758004] WARN::hcd_init_fiq:496: MPHI regs_base at ffffffc080065000
[    2.759993] dwc_otg 3f980000.usb: DWC OTG Controller
[    2.761009] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    2.762061] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
[    2.763131] Init: Port Power? op_state=1
[    2.764181] Init: Power Port (0)
[    2.765465] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    2.767562] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.768702] usb usb1: Product: DWC OTG Controller
[    2.769810] usb usb1: Manufacturer: Linux 6.6.31+rpt-rpi-v8 dwc_otg_hcd
[    2.770944] usb usb1: SerialNumber: 3f980000.usb
[    2.772868] hub 1-0:1.0: USB hub found
[    2.774023] hub 1-0:1.0: 1 port detected
[    2.775780] dwc_otg: FIQ enabled
[    2.775789] dwc_otg: NAK holdoff enabled
[    2.775796] dwc_otg: FIQ split-transaction FSM enabled
[    2.775851] Module dwc_common_port init
[    2.776656] usbcore: registered new interface driver uas
[    2.777830] usbcore: registered new interface driver usb-storage
[    2.779426] mousedev: PS/2 mouse device common for all mice
[    2.783151] sdhci: Secure Digital Host Controller Interface driver
[    2.784259] sdhci: Copyright(c) Pierre Ossman
[    2.785502] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.788058] ledtrig-cpu: registered to indicate activity on CPUs
[    2.789495] hid: raw HID events driver (C) Jiri Kosina
[    2.790724] usbcore: registered new interface driver usbhid
[    2.791854] usbhid: USB HID core driver
[    2.793048] bcm2835_vchiq 3f00b840.mailbox: there is not valid maps for state default
[    2.799473] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    2.803039] NET: Registered PF_PACKET protocol family
[    2.804365] Key type dns_resolver registered
[    2.843855] registered taskstats version 1
[    2.845332] Loading compiled-in X.509 certificates
[    2.861531] Key type .fscrypt registered
[    2.862673] Key type fscrypt-provisioning registered
[    2.876134] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    2.877603] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    2.880243] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    2.881341] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[    2.910657] sdhost: log_buf @ 00000000dd243b3d (c2896000)
[    2.961121] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.963151] uart-pl011 3f201000.serial: there is not valid maps for state default
[    2.964819] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    2.966740] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2
[    2.969505] printk: console [ttyAMA0] enabled
[    4.274868] of_cfs_init
[    4.279615] of_cfs_init: OK
[    4.284096] clk: Disabling unused clocks
[    4.289880] uart-pl011 3f201000.serial: no DMA platform data
[    4.308230] Freeing unused kernel memory: 4864K
[    4.314149] Run /init as init process
[    4.318900]   with arguments:
[    4.318908]     /init
[    4.318916]   with environment:
[    4.318922]     HOME=/
[    4.318930]     TERM=linux
[    4.332384] mmc0: host does not support reading read-only switch, assuming write-enable
[    4.346089] mmc0: Host Software Queue enabled
[    4.351696] mmc0: new high speed SDXC card at address aaaa
[    4.359775] mmcblk0: mmc0:aaaa SN64G 59.5 GiB
[    4.369057]  mmcblk0: p1 p2
[    4.374041] mmcblk0: mmc0:aaaa SN64G 59.5 GiB (quirks 0x00004000)
[    4.398920] mmc1: new high speed SDIO card at address 0001
[    5.029239] input: soc:shutdown_button@5 as /devices/platform/soc/soc:shutdown_button@5/input/input0
[    5.121530] enc28j60 spi0.0: Ethernet driver 1.02 loaded
[    5.145915] rtc-ds1307 1-0068: registered as rtc0
[    5.153973] rtc-ds1307 1-0068: setting system clock to 2024-08-22T08:33:53 UTC (1724315633)
[    5.711186] EXT4-fs (mmcblk0p2): mounted filesystem 6a932c1f-7335-42d9-9351-1b1b2ca538d4 ro with ordered data mode. Quota mode: none.
[    6.870440] NET: Registered PF_INET6 protocol family
[    6.878454] Segment Routing with IPv6
[    6.883389] In-situ OAM (IOAM) with IPv6
[    6.989847] systemd[1]: systemd 252.26-1~deb12u2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    7.029129] systemd[1]: Detected architecture arm64.
[    7.064121] systemd[1]: Hostname set to <zero2w.cluster.samveen.in>.
[    8.376522] systemd[1]: Queued start job for default target graphical.target.
[    8.412072] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[    8.442104] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[    8.474067] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[    8.505266] systemd[1]: Created slice user.slice - User and Session Slice.
[    8.532478] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[    8.564390] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[    8.597194] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[    8.632108] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-d65d6b68\x2d01.device - /dev/disk/by-partuuid/d65d6b68-01...
[    8.664010] systemd[1]: Expecting device dev-ttyAMA0.device - /dev/ttyAMA0...
[    8.688069] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[    8.716179] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[    8.744324] systemd[1]: Reached target paths.target - Path Units.
[    8.768213] systemd[1]: Reached target slices.target - Slice Units.
[    8.792168] systemd[1]: Reached target swap.target - Swaps.
[    8.816148] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[    8.844935] systemd[1]: Listening on syslog.socket - Syslog Socket.
[    8.868820] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[    8.896479] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[    8.925689] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[    8.956851] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[    8.989015] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[    9.017173] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[    9.044763] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[    9.073071] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[    9.116296] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[    9.149392] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[    9.181310] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[    9.208560] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[    9.252661] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[    9.286315] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[    9.336818] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[    9.370714] systemd[1]: Starting [email protected] - Load Kernel Module configfs...
[    9.420821] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[    9.454669] systemd[1]: Starting [email protected] - Load Kernel Module drm...
[    9.488776] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[    9.500280] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
[    9.560845] systemd[1]: Starting [email protected] - Load Kernel Module fuse...
[    9.600395] systemd[1]: Starting [email protected] - Load Kernel Module loop...
[    9.630019] fuse: init (API version 7.39)
[    9.645052] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[    9.688690] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[    9.726562] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[    9.766607] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[    9.813751] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[    9.823800] EXT4-fs (mmcblk0p2): re-mounted 6a932c1f-7335-42d9-9351-1b1b2ca538d4 r/w. Quota mode: none.
[    9.857852] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[    9.885198] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[    9.916026] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[    9.945953] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[    9.977973] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[   10.010212] systemd[1]: [email protected]: Deactivated successfully.
[   10.020250] systemd[1]: Finished [email protected] - Load Kernel Module configfs.
[   10.050083] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[   10.064063] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[   10.098383] systemd[1]: [email protected]: Deactivated successfully.
[   10.111999] systemd[1]: Finished [email protected] - Load Kernel Module drm.
[   10.145995] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[   10.156112] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[   10.190088] systemd[1]: [email protected]: Deactivated successfully.
[   10.199485] systemd[1]: Finished [email protected] - Load Kernel Module fuse.
[   10.229974] systemd[1]: [email protected]: Deactivated successfully.
[   10.244057] systemd[1]: Finished [email protected] - Load Kernel Module loop.
[   10.279953] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[   10.309989] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[   10.341513] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices.
[   10.404319] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[   10.437167] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[   10.464184] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[   10.480612] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[   10.506763] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[   10.532587] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[   10.553455] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[   10.624749] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[   10.666291] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[   10.684822] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[   10.705934] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
[   10.717561] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[   10.737591] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[   10.757243] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[   10.776714] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[   10.867149] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[   10.884984] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[   10.928640] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
[   11.343118] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files.
[   11.783388] systemd[1]: Found device dev-ttyAMA0.device - /dev/ttyAMA0.
[   11.961436] systemd[1]: Found device dev-disk-by\x2dpartuuid-d65d6b68\x2d01.device - /dev/disk/by-partuuid/d65d6b68-01.
[   12.014713] systemd[1]: Starting systemd-fsck@dev-disk-by\x2dpartuuid-d65d6b68\x2d01.service - File System Check on /dev/disk/by-partuuid/d65d6b68-01...
[   12.117033] systemd[1]: Started systemd-fsckd.service - File System Check Daemon to report status.
[   12.178077] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[   12.180655] rpi-gpiomem 3f200000.gpiomem: window base 0x3f200000 size 0x00001000
[   12.181650] rpi-gpiomem 3f200000.gpiomem: initialised 1 regions as /dev/gpiomem
[   12.190370] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[   12.190412] [vc_sm_connected_init]: start
[   12.194554] vc_sm_cma_vchi_init: failed to open VCHI service (-22)
[   12.194587] [vc_sm_connected_init]: failed to initialize shared memory service
[   12.229908] mc: Linux media interface: v0.10
[   12.463734] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[   12.512646] videodev: Linux video capture interface: v2.00
[   12.578629] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   12.607182] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[   12.610169] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[   12.627215] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-22)
[   12.627253] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-22)
[   12.627392] : Unregister from media controller
[   12.627406] (efault): Unregistering node (null)[0] device node /dev/video0
[   12.627420] (efault): Unregistering node (null)[0] device node /dev/video0
[   12.627432] (efault): Unregistering node (null)[0] device node /dev/video0
[   12.627444] (efault): Unregistering node (null)[0] device node /dev/video0
[   12.640622] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[   12.644239] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-22)
[   12.821618] systemd[1]: Finished systemd-fsck@dev-disk-by\x2dpartuuid-d65d6b68\x2d01.service - File System Check on /dev/disk/by-partuuid/d65d6b68-01.
[   12.900653] systemd[1]: Mounting boot-firmware.mount - /boot/firmware...
[   12.946557] systemd[1]: Mounted boot-firmware.mount - /boot/firmware.
[   12.964999] systemd[1]: Reached target local-fs.target - Local File Systems.
[   12.980723] systemd[1]: apparmor.service - Load AppArmor profiles was skipped because of an unmet condition check (ConditionSecurity=apparmor).
[   13.025369] systemd[1]: Starting console-setup.service - Set console font and keymap...
[   13.051134] systemd[1]: Starting log2ram.service - Log2Ram...
[   13.078395] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats...
[   13.096517] systemd[1]: systemd-machine-id-commit.service - Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id).
[   13.098875] systemd[1]: Finished console-setup.service - Set console font and keymap.
[   13.142709] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 383 (systemd-binfmt)
[   13.180712] systemd[1]: Mounting proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System...
[   13.257690] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   13.262237] systemd[1]: Mounted proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System.
[   13.293910] systemd[1]: Finished systemd-binfmt.service - Set Up Additional Binary Formats.
[   13.305547] Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[   13.307099] Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[   13.316755] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   13.318328] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   13.404456] zram: Added device: zram0
[   13.413875] zram0: detected capacity change from 0 to 204800
[   13.512344] EXT4-fs (zram0): mounted filesystem 638139b9-930e-4d7d-8ccb-72e1b87616c3 r/w with ordered data mode. Quota mode: none.
[   13.681117] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[   13.700124] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[   13.700869] usbcore: registered new interface driver brcmfmac
[   13.813626] EXT4-fs (zram0): unmounting filesystem 638139b9-930e-4d7d-8ccb-72e1b87616c3.
[   13.851396] systemd[1]: log2ram.service: Main process exited, code=exited, status=1/FAILURE
[   13.852532] systemd[1]: log2ram.service: Failed with result 'exit-code'.
[   13.853541] systemd[1]: Failed to start log2ram.service - Log2Ram.
[   13.941463] systemd[1]: Starting systemd-journald.service - Journal Service...
[   13.953604] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[   13.954386] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jun 14 2023 07:27:45 version 7.45.96.s1 (gf031a129) FWID 01-70bd2af7 es7
[   13.963124] systemd[1]: var-log.mount: Deactivated successfully.
[   13.968404] systemd[1]: var-hdd.log.mount: Deactivated successfully.
[   14.140420] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch.
[   14.213052] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status...
[   14.268084] systemd[1]: Started systemd-journald.service - Journal Service.
[   14.408905] systemd-journald[429]: Received client request to flush runtime journal.
[   19.663123] Adding 970748k swap on /var/swap.  Priority:-2 extents:64 across:33091584k SS
[   21.848493] systemd[589]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[   22.197154] enc28j60 spi0.0 eth0: link down
[   22.197196] enc28j60 spi0.0 eth0: multicast mode
[   22.228940] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   23.294391] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
@raspberrypi raspberrypi deleted a comment from Shahn32125 Oct 8, 2024
@maxxsyntax
Copy link

Experiencing the same problem The pi slows to a halt.

sudo journalctl -n 50000000 |grep -E 'brcmfmac: brcmf_sdio_htclk:|Missed [0-9]+ kernel messages' |head -n2

Oct 23 14:12:34 raspberrypi systemd-journald[34643]: Missed 8 kernel messages
Oct 23 14:12:34 raspberrypi kernel: brcmfmac: brcmf_sdio_htclk: HT Avail request error: -5

pi@node1:~ $ sudo journalctl -n 50000000 |grep -E 'brcmfmac: brcmf_sdio_htclk:|Missed [0-9]+ kernel messages' |wc -l
10571674

sudo journalctl -n 50000000 |grep -E 'brcmfmac: brcmf_sdio_htclk:|Missed [0-9]+ kernel messages' |tail -n2
Oct 23 14:40:15 raspberrypi kernel: brcmfmac: brcmf_sdio_htclk: HT Avail request error: -5]
Oct 23 14:40:15 raspberrypi kernel: brcmfmac: brcmf_sdio_htclk: HT Avail request error: -5

pi@node1:~ $ uname -a && cat /etc/os-release
Linux node1 6.6.51+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.51-1+rpt3 (2024-10-08) aarch64 GNU/Linux
PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
NAME="Debian GNU/Linux"
VERSION_ID="12"
VERSION="12 (bookworm)"
VERSION_CODENAME=bookworm
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

apt list firmware-brcm80211 --installed && apt show firmware-brcm80211=1:20230625-2+rpt2  2>/dev/null |grep -E '^Package:|^Version:|^Status:|^Section:|^Source:|^Description:'
Listing... Done
firmware-brcm80211/stable,stable,now 1:20230625-2+rpt3 all [installed]
N: There is 1 additional version. Please use the '-a' switch to see it
Package: firmware-brcm80211

pi@node1:~ $ raspinfo 
System Information
------------------

Raspberry Pi Zero 2 W Rev 1.0
PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
NAME="Debian GNU/Linux"
VERSION_ID="12"
VERSION="12 (bookworm)"

Raspberry Pi reference 2024-07-04
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 48efb5fc5485fafdc9de8ad481eb5c09e1182656, stage2

Linux node1 6.6.51+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.51-1+rpt3 (2024-10-08) aarch64 GNU/Linux
Revision	: 902120
Serial		: 000000003da64fdd
Model		: Raspberry Pi Zero 2 W Rev 1.0
Throttled flag  : throttled=0x0
Camera          : supported=0 detected=0, libcamera interfaces=0

Videocore information
---------------------

Aug 30 2024 19:19:11 
Copyright (c) 2012 Broadcom
version 2808975b80149bbfe86844655fe45c7de66fc078 (clean) (release) (start)

alloc failures:     0
compactions:        0
legacy block fails: 0


Filesystem information
----------------------
Filesystem     1K-blocks    Used Available Use% Mounted on
udev               74240       0     74240   0% /dev
tmpfs              42704    1016     41688   3% /run
/dev/mmcblk0p2  29920260 7503068  20878452  27% /
tmpfs             213500       0    213500   0% /dev/shm
tmpfs               5120       8      5112   1% /run/lock
/dev/mmcblk0p1    522230   65286    456944  13% /boot/firmware
tmpfs              42700       0     42700   0% /run/user/1000

Filename				Type		Size		Used		Priority
/var/swap                               file		204796		24064		-2

Package version information
---------------------------
raspberrypi-ui-mods:
  Installed: (none)
raspberrypi-sys-mods:
  Installed: 20240911
openbox:
  Installed: (none)
lxpanel:
  Installed: (none)
pcmanfm:
  Installed: (none)
rpd-plym-splash:
  Installed: (none)

Networking Information
----------------------

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet x.x.x.x  netmask x.x.x.x
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 10  bytes 1040 (1.0 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 10  bytes 1040 (1.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet x.x.x.x  netmask x.x.x.x  broadcast x.x.x.x
        inet6 y::y.y.y.y  prefixlen 64  scopeid 0x20<link>
        ether m.m.m.m  txqueuelen 1000  (Ethernet)
        RX packets 304  bytes 32436 (31.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 298  bytes 40948 (39.9 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


USB Information
---------------

/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
        |__ Port 1: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M

Display Information
-------------------

Running (F)KMS, console

/sys/class/drm/card0-HDMI-A-1
AP///////wAQrH5BVzBGQTQdAQOAPCJ47u6Vo1RMmSYPUFSlSwBxT4GAqUDRwAEBAQEBAQEBVl4A
oKCgKVAwIDUAVVAhAAAaAAAA/wBEQkpQVFMyCiAgICAgAAAA/ABERUxMIFUyNzE5REMKAAAA/QA4
TB5aGQAKICAgICAgAZICAyLxT5AFBAMCBxYBBhESFRMUHyMJfweDAQAAZQMMABAAAjqAGHE4LUBY
LEUAVVAhAAAefjkAoIA4H0AwIDoAVVAhAAAaAR0AclHQHiBuKFUAVVAhAAAevxYAoIA4E0AwIDoA
VVAhAAAaAAAAAAAAAAAAAAAAAAAAAAAAAAAAiA==

/sys/class/drm/card0-Writeback-1


Connector 0 (32) HDMI-A-1 (connected)
  Encoder 0 (31) TMDS
    Crtc 3 (94) [email protected] 147.180 2048/48/32/80/+ 1080/3/10/18/- 60 (60.00) D 
      Plane 3 (83) fb-id: 316 (crtcs: 3) 0,0 2048x1080 -> 0,0 2048x1080 (XR24 AR24 AB24 XB24 RG16 BG16 AR15 XR15 RG24 BG24 YU16 YV16 YU24 YV24 YU12 YV12 NV12 NV21 NV16 NV61 RGB8 BGR8 XR12 AR12 XB12 AB12 BX12 BA12 RX12 RA12)
        FB 316 2048x1080 RG16

Connector 0 (32) HDMI-A-1 (connected)
   0 [email protected]  147.180 2048/48/32/80/+    1080/3/10/18/-     60 (60.00) D     
   1 [email protected]   58.230 2048/48/32/80/+    1080/3/10/6/-      24 (24.00) D     
   2 [email protected]  148.500 1920/88/44/148/+   1080/4/5/36/+      60 (60.00) D     
   3 [email protected]  148.500 1920/88/44/148/+   1080/4/5/36/+      60 (60.00) D     16:9
   4 [email protected]  148.352 1920/88/44/148/+   1080/4/5/36/+      60 (59.94) D     16:9
   5 [email protected]  74.250 1920/88/44/148/+   1080/4/10/31/+     60 (60.00) D     16:9
   6 [email protected]  74.176 1920/88/44/148/+   1080/4/10/31/+     60 (59.94) D     16:9
   7 [email protected]  148.500 1920/528/44/148/+  1080/4/5/36/+      50 (50.00) D     16:9
   8 [email protected]  74.250 1920/528/44/148/+  1080/4/10/31/+     50 (50.00) D     16:9
   9 [email protected]  162.000 1600/64/192/304/+  1200/1/3/46/+      60 (60.00) D     
  10 [email protected]  135.000 1280/16/144/248/+  1024/1/3/38/+      75 (75.02) D     
  11 [email protected]  108.000 1280/48/112/248/+  1024/1/3/38/+      60 (60.02) D     
  12 [email protected]   108.000 1152/64/128/256/+  864/1/3/32/+       75 (75.00) D     
  13 [email protected]    74.250 1280/110/40/220/+  720/5/5/20/+       60 (60.00) D     
  14 [email protected]    74.250 1280/110/40/220/+  720/5/5/20/+       60 (60.00) D     16:9
  15 [email protected]    74.176 1280/110/40/220/+  720/5/5/20/+       60 (59.94) D     16:9
  16 [email protected]    74.250 1280/440/40/220/+  720/5/5/20/+       50 (50.00) D     16:9
  17 [email protected]    78.750 1024/16/96/176/+   768/1/3/28/+       75 (75.03) D     
  18 [email protected]    65.000 1024/24/136/160/-  768/3/6/29/-       60 (60.00) D     
  19 [email protected]     49.500 800/16/80/160/+    600/1/3/21/+       75 (75.00) D     
  20 [email protected]     40.000 800/40/128/88/+    600/1/4/23/+       60 (60.32) D     
  21 [email protected]     27.000 720/12/64/68/-     576/5/5/39/-       50 (50.00) D     4:3
  22 [email protected]     27.000 720/12/64/68/-     576/5/5/39/-       50 (50.00) D     16:9
  23 [email protected]    13.500 720/12/63/69/-     576/4/6/39/-       50 (50.00) D     2x|16:9
  24 [email protected]    13.500 720/12/63/69/-     576/4/6/39/-       50 (50.00) D     2x|4:3
  25 [email protected]     27.027 720/16/62/60/-     480/9/6/30/-       60 (60.00) D     16:9
  26 [email protected]     27.027 720/16/62/60/-     480/9/6/30/-       60 (60.00) D     4:3
  27 [email protected]     27.000 720/16/62/60/-     480/9/6/30/-       60 (59.94) D     16:9
  28 [email protected]     27.000 720/16/62/60/-     480/9/6/30/-       60 (59.94) D     4:3
  29 [email protected]    13.514 720/19/62/57/-     480/8/6/31/-       60 (60.00) D     2x|16:9
  30 [email protected]    13.514 720/19/62/57/-     480/8/6/31/-       60 (60.00) D     2x|4:3
  31 [email protected]    13.500 720/19/62/57/-     480/8/6/31/-       60 (59.94) D     2x|16:9
  32 [email protected]    13.500 720/19/62/57/-     480/8/6/31/-       60 (59.94) D     2x|4:3
  33 [email protected]     31.500 640/16/64/120/-    480/1/3/16/-       75 (75.00) D     
  34 [email protected]     25.200 640/16/96/48/-     480/10/2/33/-      60 (60.00) D     4:3
  35 [email protected]     25.175 640/16/96/48/-     480/10/2/33/-      60 (59.94) D     
  36 [email protected]     25.175 640/16/96/48/-     480/10/2/33/-      60 (59.94) D     4:3
  37 [email protected]     28.320 720/18/108/54/-    400/12/2/35/+      70 (70.08) D     


/sys/kernel/debug/dri/0/state:
plane[41]: plane-0
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=0
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[59]: plane-1
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=0
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[71]: plane-2
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=0
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[83]: plane-3
	crtc=pixelvalve-2
	fb=316
		allocated by = [fbcon]
		refcount=2
		format=RG16 little-endian (0x36314752)
		modifier=0x0
		size=2048x1080
		layers:
			size[0]=2048x1080
			pitch[0]=4096
			offset[0]=0
			obj[0]:
				name=0
				refcount=2
				start=00100000
				size=4423680
				imported=no
	crtc-pos=2048x1080+0+0
	src-pos=2048.000000x1080.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=0
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[95]: plane-4
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=1
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[106]: plane-5
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=2
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[117]: plane-6
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=3
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[128]: plane-7
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=4
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[139]: plane-8
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=5
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[150]: plane-9
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=6
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[161]: plane-10
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=7
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[172]: plane-11
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=8
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[183]: plane-12
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=9
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[194]: plane-13
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=a
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[205]: plane-14
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=b
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[216]: plane-15
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=c
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[227]: plane-16
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=d
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[238]: plane-17
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=e
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[249]: plane-18
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=f
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[260]: plane-19
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=10
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[271]: plane-20
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=11
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[282]: plane-21
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=11
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[293]: plane-22
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=11
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[304]: plane-23
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=11
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
crtc[52]: txp
	enable=0
	active=0
	self_refresh_active=0
	planes_changed=0
	mode_changed=0
	active_changed=0
	connectors_changed=0
	color_mgmt_changed=0
	plane_mask=0
	connector_mask=0
	encoder_mask=0
	mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[70]: pixelvalve-0
	enable=0
	active=0
	self_refresh_active=0
	planes_changed=0
	mode_changed=0
	active_changed=0
	connectors_changed=0
	color_mgmt_changed=0
	plane_mask=0
	connector_mask=0
	encoder_mask=0
	mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[82]: pixelvalve-1
	enable=0
	active=0
	self_refresh_active=0
	planes_changed=0
	mode_changed=0
	active_changed=0
	connectors_changed=0
	color_mgmt_changed=0
	plane_mask=0
	connector_mask=0
	encoder_mask=0
	mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[94]: pixelvalve-2
	enable=1
	active=1
	self_refresh_active=0
	planes_changed=1
	mode_changed=0
	active_changed=0
	connectors_changed=0
	color_mgmt_changed=0
	plane_mask=8
	connector_mask=1
	encoder_mask=1
	mode: "2048x1080": 60 147180 2048 2096 2128 2208 1080 1083 1093 1111 0x40 0x9
connector[32]: HDMI-A-1
	crtc=pixelvalve-2
	self_refresh_aware=0
	max_requested_bpc=8
	colorspace=Default
connector[58]: Writeback-1
	crtc=(null)
	self_refresh_aware=0
	max_requested_bpc=0
	colorspace=Default



Audio Information
-------------------

**** List of PLAYBACK Hardware Devices ****
card 0: vc4hdmi [vc4-hdmi], device 0: MAI PCM i2s-hifi-0 [MAI PCM i2s-hifi-0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

null
    Discard all samples (playback) or generate zero samples (capture)
default
    Default Audio Device
sysdefault
    Default Audio Device
hw:CARD=vc4hdmi,DEV=0
    vc4-hdmi, MAI PCM i2s-hifi-0
    Direct hardware device without any conversions
plughw:CARD=vc4hdmi,DEV=0
    vc4-hdmi, MAI PCM i2s-hifi-0
    Hardware device with all software conversions
default:CARD=vc4hdmi
    vc4-hdmi, MAI PCM i2s-hifi-0
    Default Audio Device
sysdefault:CARD=vc4hdmi
    vc4-hdmi, MAI PCM i2s-hifi-0
    Default Audio Device
hdmi:CARD=vc4hdmi,DEV=0
    vc4-hdmi, MAI PCM i2s-hifi-0
    HDMI Audio Output
dmix:CARD=vc4hdmi,DEV=0
    vc4-hdmi, MAI PCM i2s-hifi-0
    Direct sample mixing device

Unit pipewire.socket could not be found.
Unit pipewire.service could not be found.
Unit pulseaudio.service could not be found.
Unit pulseaudio.socket could not be found.

pactl not installed

config.txt
----------

aphy_params_current=819
arm_64bit=1
arm_boost=1
arm_freq=1000
arm_freq_min=600
audio_pwm_mode=514
auto_initramfs=1
camera_auto_detect=1
config_hdmi_boost=5
core_freq=400
desired_osc_freq=0x331df0
disable_commandline_tags=2
disable_fw_kms_setup=1
disable_l2cache=1
disable_overscan=1
display_auto_detect=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dphy_params_current=547
dvfs=3
enable_tvout=1
enable_uart=1
force_eeprom_read=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=300
hdmi_enable_4kp60=-1
ignore_lcd=1
init_uart_clock=0x2dc6c00
mask_gpu_interrupt0=3072
mask_gpu_interrupt1=26370
max_framebuffers=2
over_voltage_avs=18750
pause_burst_frames=1
pciex4_reset=1
pmic_turbo_threshold=600
program_serial_random=1
sdram_freq=450
total_mem=512
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
hdmi_pixel_freq_limit:0=0x9a7ec80
hdmi_pixel_freq_limit:1=0x9a7ec80
device_tree=-
overlay_prefix=overlays/
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=

cmdline.txt
-----------
coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=B8:27:EB:A6:4F:DD vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  console=ttyAMA0,115200 console=tty1 root=PARTUUID=4276cf70-02 rootfstype=ext4 fsck.repair=yes rootwait

pin configuration
-----------------

 0: ip    -- | hi // ID_SDA/GPIO0 = input
 1: ip    -- | hi // ID_SCL/GPIO1 = input
 2: ip    -- | hi // GPIO2 = input
 3: ip    -- | hi // GPIO3 = input
 4: ip    -- | hi // GPIO4 = input
 5: ip    -- | hi // GPIO5 = input
 6: ip    -- | hi // GPIO6 = input
 7: ip    -- | hi // GPIO7 = input
 8: ip    -- | hi // GPIO8 = input
 9: ip    -- | lo // GPIO9 = input
10: ip    -- | lo // GPIO10 = input
11: ip    -- | lo // GPIO11 = input
12: ip    -- | lo // GPIO12 = input
13: ip    -- | lo // GPIO13 = input
14: a0    -- | hi // GPIO14 = TXD0
15: a0    -- | hi // GPIO15 = RXD0
16: ip    -- | lo // GPIO16 = input
17: ip    -- | lo // GPIO17 = input
18: ip    -- | lo // GPIO18 = input
19: ip    -- | lo // GPIO19 = input
20: ip    -- | lo // GPIO20 = input
21: ip    -- | lo // GPIO21 = input
22: ip    -- | lo // GPIO22 = input
23: ip    -- | lo // GPIO23 = input
24: ip    -- | lo // GPIO24 = input
25: ip    -- | lo // GPIO25 = input
26: ip    -- | lo // GPIO26 = input
27: ip    -- | lo // GPIO27 = input
28: ip    -- | lo // HDMI_HPD_N/GPIO28 = input
29: op -- -- | lo // STATUS_LED_N/GPIO29 = output
30: ip    -- | hi // CTS0/GPIO30 = input
31: ip    -- | hi // RTS0/GPIO31 = input
32: ip    -- | hi // TXD0/GPIO32 = input
33: ip    -- | hi // RXD0/GPIO33 = input
34: a3    -- | hi // SD1_CLK/GPIO34 = SD1_CLK
35: a3    -- | hi // SD1_CMD/GPIO35 = SD1_CMD
36: a3    -- | hi // SD1_DATA0/GPIO36 = SD1_DAT0
37: a3    -- | hi // SD1_DATA1/GPIO37 = SD1_DAT1
38: a3    -- | hi // SD1_DATA2/GPIO38 = SD1_DAT2
39: a3    -- | hi // SD1_DATA3/GPIO39 = SD1_DAT3
40: op -- -- | lo // CAM_GPIO1/GPIO40 = output
41: op -- -- | hi // WL_ON/GPIO41 = output
42: op -- -- | lo // BT_ON/GPIO42 = output
43: a0    -- | lo // WIFI_CLK/GPIO43 = GPCLK2
44: ip    -- | hi // SDA0/GPIO44 = input
45: ip    -- | hi // SCL0/GPIO45 = input
46: ip    -- | hi // SMPS_SCL/GPIO46 = input
47: op -- -- | hi // SMPS_SDA/GPIO47 = output
48: a0    -- | lo // SD_CLK_R/GPIO48 = SD0_CLK
49: a0    -- | hi // SD_CMD_R/GPIO49 = SD0_CMD
50: a0    -- | hi // SD_DATA0_R/GPIO50 = SD0_DAT0
51: a0    -- | hi // SD_DATA1_R/GPIO51 = SD0_DAT1
52: a0    -- | hi // SD_DATA2_R/GPIO52 = SD0_DAT2
53: a0    -- | hi // SD_DATA3_R/GPIO53 = SD0_DAT3

vcdbg log messages
------------------

001151.924: brfs: File read: /mfs/sd/config.txt
001152.858: brfs: File read: 1268 bytes
001213.843: brfs: File read: /mfs/sd/config.txt
001214.839: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
001715.991: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
001716.050: *** Restart logging
001716.076: brfs: File read: 1268 bytes
001743.750: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined
001753.047: HDMI0: hdmi_pixel_encoding: 162000000
002444.557: brfs: File read: /mfs/sd/initramfs8
002444.581: Loaded 'initramfs8' to 0x0 size 0xb3fb75
002459.991: initramfs loaded to 0x1b4b0000 (size 0xb3fb75)
002469.708: dtb_file 'bcm2710-rpi-zero-2-w.dtb'
002469.733: brfs: File read: 11795317 bytes
002473.776: brfs: File read: /mfs/sd/bcm2710-rpi-zero-2-w.dtb
002473.799: Loaded 'bcm2710-rpi-zero-2-w.dtb' to 0x100 size 0x8384
002489.097: brfs: File read: 33668 bytes
002496.885: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
002527.458: brfs: File read: 5423 bytes
002530.101: brfs: File read: /mfs/sd/config.txt
002530.258: dtparam: audio=on
002537.337: brfs: File read: 1268 bytes
002549.312: brfs: File read: /mfs/sd/overlays/vc4-kms-v3d.dtbo
002595.353: Loaded overlay 'vc4-kms-v3d'
002690.580: brfs: File read: 2760 bytes
002694.575: brfs: File read: /mfs/sd/overlays/disable-bt.dtbo
002711.706: Loaded overlay 'disable-bt'
002753.401: brfs: File read: 1073 bytes
002754.993: brfs: File read: /mfs/sd/cmdline.txt
002755.041: Read command line from file 'cmdline.txt':
002755.058: 'console=serial0,115200 console=tty1 root=PARTUUID=4276cf70-02 rootfstype=ext4 fsck.repair=yes rootwait'
002916.486: brfs: File read: 103 bytes
003460.690: brfs: File read: /mfs/sd/kernel8.img
003460.712: Loaded 'kernel8.img' to 0x200000 size 0x8dab16
005980.783: Device tree loaded to 0x1b4a7700 (size 0x8813)
005985.430: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
009061.137: vchiq_core: vchiq_init_state: slot_zero = 0xcb880000, is_master = 1
009069.961: TV service:host side not connected, dropping notification 0x00000002, 0x00000001, 0x00000010

dmesg log
---------

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.6.51+rpt-rpi-v8 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.51-1+rpt3 (2024-10-08)
[    0.000000] KASLR enabled
[    0.000000] random: crng init done
[    0.000000] Machine model: Raspberry Pi Zero 2 W Rev 1.0
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x000000000b400000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: 0x000000000b400000..0x000000001b3fffff (262144 KiB) map reusable linux,cma
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000001bffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000001bffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001bffffff]
[    0.000000] On node 0, zone DMA: 16384 pages in unavailable ranges
[    0.000000] percpu: Embedded 30 pages/cpu s85672 r8192 d29016 u122880
[    0.000000] pcpu-alloc: s85672 r8192 d29016 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] CPU features: detected: ARM erratum 843419
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  console=ttyAMA0,115200 console=tty1 root=PARTUUID=4276cf70-02 rootfstype=ext4 fsck.repair=yes rootwait
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 112896
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 148480K/458752K available (13440K kernel code, 2212K rwdata, 4268K rodata, 4864K init, 1083K bss, 48128K reserved, 262144K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 43242 entries in 169 pages
[    0.000000] ftrace: allocated 169 pages with 4 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000393] Console: colour dummy device 80x25
[    0.000410] printk: console [tty1] enabled
[    0.001306] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[    0.001354] pid_max: default: 32768 minimum: 301
[    0.001473] LSM: initializing lsm=capability,integrity
[    0.001733] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.001780] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.002905] cgroup: Disabling memory control group subsystem
[    0.005117] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.005278] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.005443] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.005811] rcu: Hierarchical SRCU implementation.
[    0.005837] rcu: 	Max phase no-delay instances is 1000.
[    0.008098] EFI services will not be available.
[    0.008552] smp: Bringing up secondary CPUs ...
[    0.009390] Detected VIPT I-cache on CPU1
[    0.009559] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.010496] Detected VIPT I-cache on CPU2
[    0.010618] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.011468] Detected VIPT I-cache on CPU3
[    0.011578] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.011704] smp: Brought up 1 node, 4 CPUs
[    0.011836] SMP: Total of 4 processors activated.
[    0.011859] CPU features: detected: 32-bit EL0 Support
[    0.011882] CPU features: detected: 32-bit EL1 Support
[    0.011905] CPU features: detected: CRC32 instructions
[    0.012267] CPU: All CPU(s) started at EL2
[    0.012306] alternatives: applying system-wide alternatives
[    0.015229] devtmpfs: initialized
[    0.028501] Enabled cp15_barrier support
[    0.028572] Enabled setend support
[    0.028841] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.028897] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.042842] pinctrl core: initialized pinctrl subsystem
[    0.043763] DMI not present or invalid.
[    0.044592] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.051866] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.052280] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.052924] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.053072] audit: initializing netlink subsys (disabled)
[    0.053429] audit: type=2000 audit(0.052:1): state=initialized audit_enabled=0 res=1
[    0.054313] thermal_sys: Registered thermal governor 'step_wise'
[    0.054379] cpuidle: using governor menu
[    0.054740] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.054923] ASID allocator initialised with 32768 entries
[    0.056048] Serial: AMBA PL011 UART driver
[    0.062359] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.072842] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-08-30T19:19:11, variant start
[    0.076819] raspberrypi-firmware soc:firmware: Firmware hash is 2808975b80149bbfe86844655fe45c7de66fc078
[    0.085292] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[    0.085334] Modules: 0 pages in range for non-PLT usage
[    0.085341] Modules: 517776 pages in range for PLT usage
[    0.093036] bcm2835-dma 3f007000.dma-controller: DMA legacy API manager, dmachans=0x1
[    0.094757] iommu: Default domain type: Translated
[    0.094791] iommu: DMA domain TLB invalidation policy: strict mode
[    0.095354] SCSI subsystem initialized
[    0.095644] usbcore: registered new interface driver usbfs
[    0.095717] usbcore: registered new interface driver hub
[    0.095813] usbcore: registered new device driver usb
[    0.096408] pps_core: LinuxPPS API ver. 1 registered
[    0.096438] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.096490] PTP clock support registered
[    0.102222] vgaarb: loaded
[    0.102907] clocksource: Switched to clocksource arch_sys_counter
[    0.103538] VFS: Disk quotas dquot_6.6.0
[    0.103610] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.103798] FS-Cache: Loaded
[    0.106980] CacheFiles: Loaded
[    0.122088] NET: Registered PF_INET protocol family
[    0.122382] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.123792] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.123853] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.123972] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.124066] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.124300] TCP: Hash tables configured (established 4096 bind 4096)
[    0.124636] MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear)
[    0.124731] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.124788] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.125036] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.125747] RPC: Registered named UNIX socket transport module.
[    0.125781] RPC: Registered udp transport module.
[    0.125802] RPC: Registered tcp transport module.
[    0.125822] RPC: Registered tcp-with-tls transport module.
[    0.125843] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.125882] PCI: CLS 0 bytes, default 64
[    0.126666] Trying to unpack rootfs image as initramfs...
[    0.135338] kvm [1]: IPA Size Limit: 40 bits
[    0.137207] kvm [1]: Hyp mode initialized successfully
[    1.133579] Freeing initrd memory: 11516K
[    1.750273] Initialise system trusted keyrings
[    1.750672] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    1.750782] zbud: loaded
[    1.751811] NFS: Registering the id_resolver key type
[    1.751861] Key type id_resolver registered
[    1.751884] Key type id_legacy registered
[    1.751930] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.751959] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.752921] Key type asymmetric registered
[    1.752954] Asymmetric key parser 'x509' registered
[    1.753049] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.753320] io scheduler mq-deadline registered
[    1.753348] io scheduler kyber registered
[    1.753405] io scheduler bfq registered
[    1.756362] pinctrl-bcm2835 3f200000.gpio: GPIO_OUT persistence: yes
[    1.758231] simple-framebuffer 1e402000.framebuffer: framebuffer at 0x1e402000, 0x7f8000 bytes
[    1.758279] simple-framebuffer 1e402000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
[    1.778755] Console: switching to colour frame buffer device 240x67
[    1.797496] simple-framebuffer 1e402000.framebuffer: fb0: simplefb registered!
[    1.801615] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    1.804235] bcm2835-rng 3f104000.rng: hwrng registered
[    1.804774] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    1.820779] brd: module loaded
[    1.829910] loop: module loaded
[    1.830776] Loading iSCSI transport class v2.0-870.
[    1.836745] usbcore: registered new device driver r8152-cfgselector
[    1.836955] usbcore: registered new interface driver r8152
[    1.837114] usbcore: registered new interface driver lan78xx
[    1.837266] usbcore: registered new interface driver smsc95xx
[    1.837651] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    2.566000] Core Release: 2.80a
[    2.566091] Setting default values for core params
[    2.566206] Finished setting default values for core params
[    2.766659] Using Buffer DMA mode
[    2.766730] Periodic Transfer Interrupt Enhancement - disabled
[    2.766832] Multiprocessor Interrupt Enhancement - disabled
[    2.766942] OTG VER PARAM: 0, OTG VER FLAG: 0
[    2.767031] Dedicated Tx FIFOs mode

[    2.768279] WARN::dwc_otg_hcd_init:1070: FIQ DMA bounce buffers: virt = ffffffc080ba2000 dma = 0x00000000cb800000 len=9024
[    2.768539] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    2.768917] dwc_otg: Microframe scheduler enabled

[    2.768960] WARN::hcd_init_fiq:496: MPHI regs_base at ffffffc080065000
[    2.769171] dwc_otg 3f980000.usb: DWC OTG Controller
[    2.769305] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    2.769478] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
[    2.769637] Init: Port Power? op_state=1
[    2.769719] Init: Power Port (0)
[    2.770037] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    2.770198] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.770338] usb usb1: Product: DWC OTG Controller
[    2.775140] usb usb1: Manufacturer: Linux 6.6.51+rpt-rpi-v8 dwc_otg_hcd
[    2.779958] usb usb1: SerialNumber: 3f980000.usb
[    2.785482] hub 1-0:1.0: USB hub found
[    2.790335] hub 1-0:1.0: 1 port detected
[    2.795855] dwc_otg: FIQ enabled
[    2.795865] dwc_otg: NAK holdoff enabled
[    2.795872] dwc_otg: FIQ split-transaction FSM enabled
[    2.795888] Module dwc_common_port init
[    2.796849] usbcore: registered new interface driver uas
[    2.801662] usbcore: registered new interface driver usb-storage
[    2.807173] mousedev: PS/2 mouse device common for all mice
[    2.814689] sdhci: Secure Digital Host Controller Interface driver
[    2.819550] sdhci: Copyright(c) Pierre Ossman
[    2.824566] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.830816] ledtrig-cpu: registered to indicate activity on CPUs
[    2.835986] hid: raw HID events driver (C) Jiri Kosina
[    2.840868] usbcore: registered new interface driver usbhid
[    2.845586] usbhid: USB HID core driver
[    2.850377] bcm2835_vchiq 3f00b840.mailbox: there is not valid maps for state default
[    2.861955] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    2.868359] NET: Registered PF_PACKET protocol family
[    2.873421] Key type dns_resolver registered
[    2.907785] Indeed it is in host mode hprt0 = 00021501
[    2.921469] registered taskstats version 1
[    2.926683] Loading compiled-in X.509 certificates
[    2.945514] Key type .fscrypt registered
[    2.950366] Key type fscrypt-provisioning registered
[    2.968215] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    2.973415] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    2.979953] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    2.984615] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[    3.015514] sdhost: log_buf @ 000000000f6a5f57 (c2ae7000)
[    3.069431] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    3.074981] uart-pl011 3f201000.serial: there is not valid maps for state default
[    3.079983] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    3.085071] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2
[    3.089862] printk: console [ttyAMA0] enabled
[    3.098939] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    3.103648] of_cfs_init
[    3.127813] Indeed it is in host mode hprt0 = 00001101
[    3.130520] of_cfs_init: OK
[    3.135079] mmc0: host does not support reading read-only switch, assuming write-enable
[    3.140179] clk: Disabling unused clocks
[    3.158385] mmc0: Host Software Queue enabled
[    3.723214] mmc1: new high speed SDIO card at address 0001
[    3.780016] mmc0: new high speed SDHC card at address 59b4
[    4.499935] mmcblk0: mmc0:59b4 LX32G 29.5 GiB
[    4.514021]  mmcblk0: p1 p2
[    4.517236] Freeing unused kernel memory: 4864K
[    4.520561] mmcblk0: mmc0:59b4 LX32G 29.5 GiB
[    4.524688] Run /init as init process
[    4.549225]   with arguments:
[    4.549233]     /init
[    4.549241]   with environment:
[    4.549248]     HOME=/
[    4.549255]     TERM=linux
[    4.575896] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    4.589309] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.601599] usb 1-1: Product: USB 2.0 Hub
[    4.606964] hub 1-1:1.0: USB hub found
[    4.619380] hub 1-1:1.0: 4 ports detected
[    5.034984] usb 1-1.1: new low-speed USB device number 3 using dwc_otg
[    5.280062] usb 1-1.1: New USB device found, idVendor=0603, idProduct=00f7, bcdDevice= 7.23
[    5.298102] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.314309] usb 1-1.1: Product: Gaming Keyboard
[    5.324508] usb 1-1.1: Manufacturer: SINO WEALTH
[    5.422032] input: SINO WEALTH Gaming Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:0603:00F7.0001/input/input0
[    5.583677] hid-generic 0003:0603:00F7.0001: input,hidraw0: USB HID v1.11 Keyboard [SINO WEALTH Gaming Keyboard] on usb-3f980000.usb-1.1/input0
[    5.641192] input: SINO WEALTH Gaming Keyboard System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:0603:00F7.0002/input/input1
[    5.719510] input: SINO WEALTH Gaming Keyboard Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:0603:00F7.0002/input/input2
[    5.739714] input: SINO WEALTH Gaming Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:0603:00F7.0002/input/input3
[    5.758699] hid-generic 0003:0603:00F7.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [SINO WEALTH Gaming Keyboard] on usb-3f980000.usb-1.1/input1
[    6.880171] EXT4-fs (mmcblk0p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none.
[    7.756477] systemd[1]: System time before build time, advancing clock.
[    8.021528] NET: Registered PF_INET6 protocol family
[    8.034089] Segment Routing with IPv6
[    8.043693] In-situ OAM (IOAM) with IPv6
[    8.143511] systemd[1]: systemd 252.30-1~deb12u2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    8.189027] systemd[1]: Detected architecture arm64.
[    8.240709] systemd[1]: Hostname set to <node1>.
[    8.543687] uart-pl011 3f201000.serial: no DMA platform data
[    9.448349] systemd[1]: Queued start job for default target multi-user.target.
[    9.487453] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[    9.511082] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[    9.534632] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[    9.559487] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[    9.583679] systemd[1]: Created slice user.slice - User and Session Slice.
[    9.604950] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[    9.630747] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[    9.656925] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[    9.684874] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-4276cf70\x2d01.device - /dev/disk/by-partuuid/4276cf70-01...
[    9.711815] systemd[1]: Expecting device dev-ttyAMA0.device - /dev/ttyAMA0...
[    9.734315] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[    9.757637] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[    9.782651] systemd[1]: Reached target paths.target - Path Units.
[    9.804698] systemd[1]: Reached target slices.target - Slice Units.
[    9.827114] systemd[1]: Reached target swap.target - Swaps.
[    9.848667] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[    9.873883] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[    9.899099] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[    9.925170] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[    9.950281] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[    9.976299] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[   10.000578] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[   10.025553] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[   10.050439] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[   10.099441] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[   10.131021] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[   10.161628] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[   10.187243] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[   10.236008] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[   10.268490] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[   10.302223] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[   10.338087] systemd[1]: Starting [email protected] - Load Kernel Module configfs...
[   10.373509] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[   10.409378] systemd[1]: Starting [email protected] - Load Kernel Module drm...
[   10.444526] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[   10.465709] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
[   10.528083] systemd[1]: Starting [email protected] - Load Kernel Module fuse...
[   10.563530] systemd[1]: Starting [email protected] - Load Kernel Module loop...
[   10.590222] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[   10.630165] systemd[1]: Starting systemd-journald.service - Journal Service...
[   10.630478] fuse: init (API version 7.39)
[   10.677886] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[   10.711690] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[   10.746995] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[   10.794635] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[   10.821868] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[   10.851438] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[   10.878734] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[   10.899376] EXT4-fs (mmcblk0p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Quota mode: none.
[   10.930621] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[   10.959411] systemd[1]: [email protected]: Deactivated successfully.
[   10.976328] systemd[1]: Finished [email protected] - Load Kernel Module configfs.
[   11.004075] systemd[1]: Started systemd-journald.service - Journal Service.
[   11.290703] systemd-journald[233]: Received client request to flush runtime journal.
[   11.335392] systemd-journald[233]: File /var/log/journal/c1262835cbc340fbb48229af86fa4f04/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   13.282830] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[   13.299142] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[   13.299203] [vc_sm_connected_init]: start
[   13.310215] mc: Linux media interface: v0.10
[   13.310256] [vc_sm_connected_init]: installed successfully
[   13.418115] videodev: Linux video capture interface: v2.00
[   13.459689] rpi-gpiomem 3f200000.gpiomem: window base 0x3f200000 size 0x00001000
[   13.460311] rpi-gpiomem 3f200000.gpiomem: initialised 1 regions as /dev/gpiomem
[   13.476668] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   13.489500] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[   13.494785] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[   13.506199] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[   13.507069] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[   13.508328] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[   13.508940] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[   13.508980] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[   13.509000] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[   13.509016] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[   13.509031] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[   13.517063] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[   13.518791] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[   13.523377] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[   13.527999] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[   13.528052] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[   13.528098] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[   13.528112] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[   13.528127] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[   13.531639] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[   13.535986] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[   13.559220] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[   13.559310] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[   13.575454] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[   13.575532] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[   13.582390] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[   13.588168] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[   13.588253] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[   13.598004] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[   13.598080] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[   13.615451] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[   13.615531] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[   14.541812] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   14.567591] Console: switching to colour dummy device 80x25
[   14.587267] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[   14.592775] Registered IR keymap rc-cec
[   14.593061] rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0
[   14.593417] input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input4
[   14.597241] Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[   14.604801] Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[   14.606525] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   14.608279] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   14.621217] input: vc4-hdmi HDMI Jack as /devices/platform/soc/3f902000.hdmi/sound/card0/input5
[   14.623419] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[   14.624019] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
[   14.624719] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[   14.635071] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[   14.635586] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[   14.635879] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[   14.657013] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[   14.812009] Console: switching to colour frame buffer device 256x67
[   14.851141] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[   14.857984] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[   14.863362] vc4-drm soc:gpu: [drm] fb0: vc4drmfb frame buffer device
[   14.871215] usbcore: registered new interface driver brcmfmac
[   15.147643] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[   15.152386] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jun 14 2023 07:27:45 version 7.45.96.s1 (gf031a129) FWID 01-70bd2af7 es7
[   15.429606] Adding 204796k swap on /var/swap.  Priority:-2 extents:12 across:2588672k SS
[   17.325654] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   37.164291] systemd[674]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 4161.758961] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 4161.758995] ieee80211 phy0: brcmf_cfg80211_dump_station: BRCMF_C_GET_ASSOCLIST failed, err=-110
[ 4269.538940] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 4269.539306] ieee80211 phy0: brcmf_cfg80211_dump_station: BRCMF_C_GET_ASSOCLIST failed, err=-110
[ 8421.598964] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 8424.162954] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 8424.163333] ieee80211 phy0: brcmf_cfg80211_get_station: GET STA INFO failed, -110
[ 8427.746958] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 8427.747512] ieee80211 phy0: brcmf_cfg80211_dump_station: BRCMF_C_GET_ASSOCLIST failed, err=-110
[ 8433.630979] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 8433.631347] ieee80211 phy0: brcmf_cfg80211_dump_station: BRCMF_C_GET_ASSOCLIST failed, err=-110
[ 8439.518974] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 8439.519352] ieee80211 phy0: brcmf_cfg80211_dump_station: BRCMF_C_GET_ASSOCLIST failed, err=-110
[ 8445.662977] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 8445.663348] ieee80211 phy0: brcmf_cfg80211_dump_station: BRCMF_C_GET_ASSOCLIST failed, err=-110
[ 8449.000012] brcmfmac: brcmf_sdio_read_control: last control frame is being processed.
[ 8449.000189] brcmfmac: brcmf_sdio_read_control: last control frame is being processed.
[ 8449.000332] brcmfmac: brcmf_sdio_read_control: last control frame is being processed.
[ 8449.000470] brcmfmac: brcmf_sdio_read_control: last control frame is being processed.
[ 8449.000608] brcmfmac: brcmf_sdio_read_control: last control frame is being processed.
[ 8853.726958] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 8853.727318] ieee80211 phy0: brcmf_cfg80211_dump_station: BRCMF_C_GET_ASSOCLIST failed, err=-110
[ 8961.758980] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 8961.759353] ieee80211 phy0: brcmf_fill_bss_param: Failed to get bss info (-110)

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@samveen @maxxsyntax