lvp_pt.ts

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="pt">
<context>
    <name>BaseImageViewer</name>
    <message>
        <source>LVP</source>
        <translation>LVP</translation>
    </message>
    <message>
        <source>Error! - Cannot create image</source>
        <translation>Erro! - Não foi possível criar a imagem</translation>
    </message>
    <message>
        <source>untitled-%1.pbm</source>
        <translation>untitled-%1.pbm</translation>
    </message>
    <message>
        <source>&apos;%1&apos; isn&apos;t save.
Do you want to save it?</source>
        <translation>&apos;%1&apos; não está salvo.
Você deseja salvá-lo?</translation>
    </message>
    <message>
        <source>Coordinates: X =</source>
        <translation>Coordenadas: X =</translation>
    </message>
    <message>
        <source>Y =</source>
        <translation>Y =</translation>
    </message>
    <message>
        <source>RGB:</source>
        <translation>RGB:</translation>
    </message>
</context>
<context>
    <name>Crop3D</name>
    <message>
        <source>Crop 3D Image</source>
        <translation>Cortar Imagem 3D</translation>
    </message>
    <message>
        <source>Start</source>
        <translation>Início</translation>
    </message>
    <message>
        <source>End</source>
        <translation>Fim</translation>
    </message>
    <message>
        <source>X-range:</source>
        <translation>X-Tamanho:</translation>
    </message>
    <message>
        <source>Y-range:</source>
        <translation>Y-Tamanho:</translation>
    </message>
    <message>
        <source>Z-range:</source>
        <translation>Z-Tamanho:</translation>
    </message>
</context>
<context>
    <name>DbmImageViewer</name>
    <message>
        <source>LVP</source>
        <translation>LVP</translation>
    </message>
    <message>
        <source>Error! - Cannot load image.</source>
        <translation>Erro! - Não foi possível carregar a imagem.</translation>
    </message>
    <message>
        <source>Save As</source>
        <translation>Salvar Como</translation>
    </message>
    <message>
        <source>dbm Images (*.dbm)</source>
        <translation>Imagens dbm (*.dbm)</translation>
    </message>
    <message>
        <source>Error! - Can&apos;t create image.</source>
        <translation>Erro! - Não foi possível criar imagem.</translation>
    </message>
    <message>
        <source>Saving Format:</source>
        <translation>Salvar no Formato:</translation>
    </message>
    <message>
        <source>&amp;Binary</source>
        <translation>&amp;Binário</translation>
    </message>
    <message>
        <source>A&amp;ligned ASCII</source>
        <translation>ASCII A&amp;linhado </translation>
    </message>
    <message>
        <source>&amp;ASCII</source>
        <translation>&amp;ASCII</translation>
    </message>
    <message>
        <source>Error! - Can&apos;t save file &quot;%1&quot;</source>
        <translation>Erro! - Não foi possível salvar o arquivo &quot;%1&quot;</translation>
    </message>
</context>
<context>
    <name>DgmImageViewer</name>
    <message>
        <source>LVP</source>
        <translation>LVP</translation>
    </message>
    <message>
        <source>Error! - Cannot load image.</source>
        <translation>Erro! - Não foi possível carregar a imagem.</translation>
    </message>
    <message>
        <source>Save As</source>
        <translation>Salvar Como</translation>
    </message>
    <message>
        <source>dgm Images (*.dgm)</source>
        <translation>Imagem dgm (*.dgm)</translation>
    </message>
    <message>
        <source>Error! - Can&apos;t create image.</source>
        <translation>Erro! - Não foi possível criar imagem.</translation>
    </message>
    <message>
        <source>Saving Format:</source>
        <translation>Salvar no Formato:</translation>
    </message>
    <message>
        <source>&amp;Binary</source>
        <translation>&amp;Binário</translation>
    </message>
    <message>
        <source>A&amp;ligned ASCII</source>
        <translation>ASCII A&amp;linhado </translation>
    </message>
    <message>
        <source>&amp;ASCII</source>
        <translation>&amp;ASCII</translation>
    </message>
    <message>
        <source>Error! - Can&apos;t save file &quot;%1&quot;</source>
        <translation>Erro! - Não foi possível salvar o arquivo &quot;%1&quot;</translation>
    </message>
</context>
<context>
    <name>DialogConfEq</name>
    <message>
        <source>Fluid A</source>
        <translation>Fluido A</translation>
    </message>
    <message>
        <source>Compressible</source>
        <translation>Compressível</translation>
    </message>
    <message>
        <source>Incompressible</source>
        <translation>Incompressível</translation>
    </message>
    <message>
        <source>Save partial data to disk</source>
        <translation>Salvar dados parciais em disco</translation>
    </message>
    <message>
        <source>Fluid B</source>
        <translation>Fluido B</translation>
    </message>
    <message>
        <source>Wetting</source>
        <translation>Molhante</translation>
    </message>
    <message>
        <source>Non-wetting</source>
        <translation>Não molhante</translation>
    </message>
    <message>
        <source>Equilibrium Configuration</source>
        <translation>Configurações de Equilíbrio</translation>
    </message>
</context>
<context>
    <name>DialogGrayTons</name>
    <message>
        <source>Gray Tons</source>
        <translation>Tons de Cinza</translation>
    </message>
    <message>
        <source>Invert</source>
        <translation>Inverter</translation>
    </message>
    <message>
        <source>Select All / Clear All</source>
        <translation>Selecionar Todos / Limpar Todos</translation>
    </message>
</context>
<context>
    <name>DialogImport</name>
    <message>
        <source>Import RAW Image</source>
        <translation>Importar Imagem RAW</translation>
    </message>
    <message>
        <source>Image Type:</source>
        <translation>Tipo de Imagem:</translation>
    </message>
    <message>
        <source>3D Binary Image (D4)</source>
        <translation>Imgem 3D Binária (D4)</translation>
    </message>
    <message>
        <source>3D Gray Scale Image (D5)</source>
        <translation>Imagem 3D Tons de Cinza (D5)</translation>
    </message>
    <message>
        <source>3D Color (RGB) Image (D6)</source>
        <translation>Imagem 3D Colorida (RGB) (D6)</translation>
    </message>
    <message>
        <source>Width (pixels):</source>
        <translation>Largura (pixeis):</translation>
    </message>
    <message>
        <source>Height (pixels):</source>
        <translation>Altura (pixeis):</translation>
    </message>
    <message>
        <source>Number of Images:</source>
        <translation>Número de Imagens:</translation>
    </message>
</context>
<context>
    <name>DialogPoresThroats</name>
    <message>
        <source>Pores and Throats Segmentation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pore is:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Black</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Write</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Flags:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Save partial results</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Generate Objects Details</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Structuring Element:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Reduction factor:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Dilatation radius:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Radius increment:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Maximum radius:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Model:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Openning Dilatation Model 11</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Openning Dilatation Model 10</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Openning Dilatation Model 9</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Openning Dilatation Model 8</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Openning Dilatation Model 7</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pores Throats By IRA Model 0</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DialogReconstruction</name>
    <message>
        <source>3D Reconstruction</source>
        <translation>Reconstrução 3D</translation>
    </message>
    <message>
        <source>.cor File:</source>
        <translation>Arquivo .cor:</translation>
    </message>
    <message>
        <source>Change</source>
        <translation>Mudar</translation>
    </message>
    <message>
        <source>Reconstruction Tipe</source>
        <translation type="obsolete">Tipo de Reconstrução</translation>
    </message>
    <message>
        <source>Truncade Gaussiana 2</source>
        <translation>Gaussiana Truncada 2</translation>
    </message>
    <message>
        <source>Truncade Gaussiana 1</source>
        <translation>Gaussiana Truncada 1</translation>
    </message>
    <message>
        <source>Dimensions X Y Z (pixel)</source>
        <translation>Dimenssões X Y Z (pixel)</translation>
    </message>
    <message>
        <source>150 x 150 x 150</source>
        <translation>150 x 150 x 150</translation>
    </message>
    <message>
        <source>200 x 200 x 200</source>
        <translation>200 x 200 x 200</translation>
    </message>
    <message>
        <source>250 x 250 x 250</source>
        <translation>250 x 250 x 250</translation>
    </message>
    <message>
        <source>300 x 300 x 300</source>
        <translation>300 x 300 x 300</translation>
    </message>
    <message>
        <source>350 x 350 x 350</source>
        <translation>350 x 350 x 350</translation>
    </message>
    <message>
        <source>400 x 400 x 400</source>
        <translation>400 x 400 x 400</translation>
    </message>
    <message>
        <source>450 x 450 x 450</source>
        <translation>450 x 450 x 450</translation>
    </message>
    <message>
        <source>500 x 500 x 500</source>
        <translation>500 x 500 x 500</translation>
    </message>
    <message>
        <source>Amplification Factory:</source>
        <translation>Fator de Amplificação:</translation>
    </message>
    <message>
        <source># Points to read of .cor file</source>
        <translation># Pontos para ler do arquivo .cor</translation>
    </message>
    <message>
        <source>Original image size pixel (μm)</source>
        <translation>Tamanho do pixel da imagem original (μm)</translation>
    </message>
    <message>
        <source>Reconstruction Type</source>
        <translation>Tipo de Reconstrução</translation>
    </message>
    <message>
        <source>50 x 50 x 50</source>
        <translation>50 x 50 x 50</translation>
    </message>
</context>
<context>
    <name>DialogReconstructionES</name>
    <message>
        <source>3D Reconstruction by Superposed Spheres</source>
        <translation>Reconstrução 3D por Esferas Sobrepostas</translation>
    </message>
    <message>
        <source>.cor File:</source>
        <translation type="obsolete">Arquivo .cor:</translation>
    </message>
    <message>
        <source>Change</source>
        <translation>Mudar</translation>
    </message>
    <message>
        <source>Dimensions X Y Z (pixel)</source>
        <translation>Dimenssões X Y Z (pixel)</translation>
    </message>
    <message>
        <source>150 x 150 x 150</source>
        <translation>150 x 150 x 150</translation>
    </message>
    <message>
        <source>200 x 200 x 200</source>
        <translation>200 x 200 x 200</translation>
    </message>
    <message>
        <source>250 x 250 x 250</source>
        <translation>250 x 250 x 250</translation>
    </message>
    <message>
        <source>300 x 300 x 300</source>
        <translation>300 x 300 x 300</translation>
    </message>
    <message>
        <source>350 x 350 x 350</source>
        <translation>350 x 350 x 350</translation>
    </message>
    <message>
        <source>400 x 400 x 400</source>
        <translation>400 x 400 x 400</translation>
    </message>
    <message>
        <source>450 x 450 x 450</source>
        <translation>450 x 450 x 450</translation>
    </message>
    <message>
        <source>500 x 500 x 500</source>
        <translation>500 x 500 x 500</translation>
    </message>
    <message>
        <source>Overlap Factor</source>
        <translation>Fator de Sobreposição</translation>
    </message>
    <message>
        <source>Border Factor</source>
        <translation>Fator de Borda</translation>
    </message>
    <message>
        <source>.dtp File:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Amplification Factory:</source>
        <translation type="unfinished">Fator de Amplificação:</translation>
    </message>
    <message>
        <source>Original image size pixel (μm)</source>
        <translation type="unfinished">Tamanho do pixel da imagem original (μm)</translation>
    </message>
    <message>
        <source> Area of ​​Solids (%)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Form</name>
    <message numerus="yes">
        <source>axis</source>
        <translation>
            <numerusform>eixo</numerusform>
            <numerusform>eixos</numerusform>
        </translation>
    </message>
    <message numerus="yes">
        <source>X</source>
        <translation>
            <numerusform>X</numerusform>
            <numerusform>X</numerusform>
        </translation>
    </message>
    <message numerus="yes">
        <source>Y</source>
        <translation>
            <numerusform>Y</numerusform>
            <numerusform>Y</numerusform>
        </translation>
    </message>
    <message numerus="yes">
        <source>Z</source>
        <translation>
            <numerusform>Z</numerusform>
            <numerusform>Z</numerusform>
        </translation>
    </message>
</context>
<context>
    <name>GLWidget</name>
    <message>
        <source>3D Visualization [%1]</source>
        <translation>Visualização 3D [%1]</translation>
    </message>
    <message>
        <source>Click and drag with the left or right mouse button to rotate the 3D Image.</source>
        <translation>Clique e arraste com o botão direito ou esquerdo do mouse para girar a imagem 3D.</translation>
    </message>
    <message>
        <source>Pore Network Visualization [%1]</source>
        <translation>Visualização da Rede de Poros [%1]</translation>
    </message>
</context>
<context>
    <name>HexEditor</name>
    <message>
        <source>%1[*]</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>About QHexEdit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>The QHexEdit example is a short Demo of the QHexEdit Widget.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Save As</source>
        <translation type="unfinished">Salvar Como</translation>
    </message>
    <message>
        <source>Save To Readable File</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QHexEdit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cannot write file %1:
%2.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>File saved</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>SDI</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cannot read file %1:
%2.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>%1</source>
        <translation type="unfinished">%1</translation>
    </message>
    <message>
        <source>File loaded</source>
        <translation type="unfinished">Arquivo carregado</translation>
    </message>
    <message>
        <source>Address:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Size:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Mode:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Overwrite</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Insert</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ImageViewer</name>
    <message>
        <source>LVP</source>
        <translation type="obsolete">LVP</translation>
    </message>
    <message>
        <source>Save As</source>
        <translation type="obsolete">Salvar Como</translation>
    </message>
    <message>
        <source>&apos;%1&apos; isn&apos;t save.
Do you want to save?</source>
        <translation type="obsolete">&apos;%1&apos; não está salvo.
Você gostaria de salvá-lo?</translation>
    </message>
    <message>
        <source>Error! - Cannot load %1.</source>
        <translation type="obsolete">Erro! - Não foi possivel carregar %1.</translation>
    </message>
    <message>
        <source>Images (*.pbm *.pgm)</source>
        <translation type="obsolete">Imagens (*.pbm *.pgm)</translation>
    </message>
    <message>
        <source>Error! - Can&apos;t create image.</source>
        <translation type="obsolete">Erro! - Não foi possível criar imagem.</translation>
    </message>
    <message>
        <source>Error! - Can&apos;t save file &quot;%1&quot;</source>
        <translation type="obsolete">Erro! - Não foi possível salvar arquivo &quot;%1&quot;</translation>
    </message>
    <message>
        <source>Coordinates (x = %1, y = %2) - RGB (%3,%4,%5)</source>
        <translation type="obsolete">Coordenadas (x = %1, y = %2) - RGB (%3,%4,%5)</translation>
    </message>
    <message>
        <source>&apos;%1&apos; isn&apos;t save.
Do you want to save it?</source>
        <translation type="obsolete">&apos;%1&apos; não está salvo.
Você deseja salvá-lo?</translation>
    </message>
</context>
<context>
    <name>ImageViewer3D</name>
    <message>
        <source>./%1</source>
        <translation type="obsolete">./%1</translation>
    </message>
    <message>
        <source>LVP</source>
        <translation type="obsolete">LVP</translation>
    </message>
    <message>
        <source>Error! - Cannot load %1.</source>
        <translation type="obsolete">Erro! - Não foi possivel carregar %1.</translation>
    </message>
    <message>
        <source>Save As</source>
        <translation type="obsolete">Salvar Como</translation>
    </message>
    <message>
        <source>.lvp_%1.pbm</source>
        <translation type="obsolete">.lvp_%1.pbm</translation>
    </message>
    <message>
        <source>.lvp_%1.pgm</source>
        <translation type="obsolete">.lvp_%1.pgm</translation>
    </message>
    <message>
        <source>%1%2</source>
        <translation type="obsolete">%1%2</translation>
    </message>
    <message>
        <source>Images (*.dbm *.dgm)</source>
        <translation type="obsolete">Imagens (*.dbm *.dgm)</translation>
    </message>
    <message>
        <source>Error! - Can&apos;t create image.</source>
        <translation type="obsolete">Erro! - Não foi possível criar imagem.</translation>
    </message>
    <message>
        <source>Error! - Can&apos;t save file &quot;%1&quot;</source>
        <translation type="obsolete">Erro! - Não foi possível savar arquivo &quot;%1&quot;</translation>
    </message>
    <message>
        <source>&apos;%1&apos; isn&apos;t save.
Do you want to save?</source>
        <translation type="obsolete">&apos;%1&apos; não está salvo.
Você gostaria de salvá-lo?</translation>
    </message>
</context>
<context>
    <name>Lvp</name>
    <message>
        <source>Open File</source>
        <translation>Abrir Arquivo</translation>
    </message>
    <message>
        <source>Image Files (*.pgm *.pbm)</source>
        <translation type="obsolete">Arquivos de Imagem (*.pgm *.pbm)</translation>
    </message>
    <message>
        <source>File loaded</source>
        <translation>Arquivo carregado</translation>
    </message>
    <message>
        <source>Error</source>
        <translation>Erro</translation>
    </message>
    <message>
        <source>:. Low Pass</source>
        <translation>:. Passa Baixa</translation>
    </message>
    <message>
        <source>.lowPass%1.%2</source>
        <translation type="obsolete">.passaBaixa%1.%2</translation>
    </message>
    <message>
        <source>%1 Ok!</source>
        <translation>%1 Ok!</translation>
    </message>
    <message>
        <source>:. High Pass</source>
        <translation>:. Passa Alta</translation>
    </message>
    <message>
        <source>.highPass%1.%2</source>
        <translation type="obsolete">.passaAlta%1.%2</translation>
    </message>
    <message>
        <source>:. Erosion</source>
        <translation type="obsolete">:. Erosão</translation>
    </message>
    <message>
        <source>.erosion%1.%2</source>
        <translation>.erosao%1.%2</translation>
    </message>
    <message>
        <source>.dilation%1.%2</source>
        <translation>.dilatacao%1.%2</translation>
    </message>
    <message>
        <source>.closing%1.%2</source>
        <translation>.fechamento%1.%2</translation>
    </message>
    <message>
        <source>About LVP</source>
        <translation>Sobre LVP</translation>
    </message>
    <message>
        <source>&amp;%1 %2</source>
        <translation>&amp;%1 %2</translation>
    </message>
    <message>
        <source>%1 %2</source>
        <translation>%1 %2</translation>
    </message>
    <message>
        <source>.opening%1.%2</source>
        <translation>.abertura%1.%2</translation>
    </message>
    <message>
        <source>Enter the Mask size:</source>
        <translation>Informe o tamanho da máscara:</translation>
    </message>
    <message>
        <source>Enter the Structuring Element size:</source>
        <translation>Informe o tamanho do Elemento Estruturante:</translation>
    </message>
    <message>
        <source>:. Dilation</source>
        <translation type="obsolete">:. Dilatação</translation>
    </message>
    <message>
        <source>:. Opening</source>
        <translation type="obsolete">:. Abertura</translation>
    </message>
    <message>
        <source>:. Closing</source>
        <translation type="obsolete">:. Fechamento</translation>
    </message>
    <message>
        <source>The &lt;b&gt;LVP&lt;/b&gt; is a Petrophysical Virtual Laboratory.</source>
        <translation>&lt;b&gt;LVP&lt;/b&gt; é um Laboratório Virtual de Petrophysica.</translation>
    </message>
    <message>
        <source>Image Files (*.pgm *.pbm *.dbm)</source>
        <translation type="obsolete">Arquivos de imagem (*.pgm *.pbm *.dbm)</translation>
    </message>
    <message>
        <source>Porosity = %1%</source>
        <translation type="obsolete">Porosidade = %1%</translation>
    </message>
    <message>
        <source>Porosity of the image &quot;%1&quot; = %2%</source>
        <translation type="obsolete">Porosidade da imagem &quot;%1&quot; = %2%</translation>
    </message>
    <message>
        <source>Open File(s)</source>
        <translation>Abrir Arquivo(s)</translation>
    </message>
    <message>
        <source>Accepted Files (*.pgm *.pbm *.dbm *.cor *.rpc);;Relative Permeability Curves (*.rpc);;Image Files (*.pgm *.pbm *.dbm);;Grey Scale Images (*.pgm);;3D Binary Images (*.dbm);;Correlation Files (*.cor);;Binary Images (*.pbm)</source>
        <translation type="obsolete">Arquivos Aceitos (*.pgm *.pbm *.dbm *.cor *.rpc);;Curvas de Permeabilidade Relativa (*.rpc);;Arquivos de Imagem (*.pgm *.pbm *.dbm);;Imagens em Tons de Cinza (*.pgm);;Imagens Binárias 3D (*.dbm);;Arquivos Correlação (*.cor);;Imagens Binárias (*.pbm)</translation>
    </message>
    <message>
        <source>File name error!</source>
        <translation type="obsolete">Erro no nome do arquivo!</translation>
    </message>
    <message>
        <source>LVP</source>
        <translation>LVP</translation>
    </message>
    <message>
        <source>The mask size must be an odd number</source>
        <translation>O tamanho da máscara deve ser um número ímpar</translation>
    </message>
    <message>
        <source>Correlation File (*.cor)</source>
        <translation type="obsolete">Arquivo Correlação (*.cor)</translation>
    </message>
    <message>
        <source>Relative Permeability Curves (*.rpc)</source>
        <translation>Curvas de Permeabilidade Relativa (*.rpc)</translation>
    </message>
    <message>
        <source>Erro! - To create 3D Image File: &quot;%1&quot;</source>
        <translation>Erro! - Para criar o arquivo da imagens 3D: &quot;%1&quot;</translation>
    </message>
    <message>
        <source>Correlation File (*.escor)</source>
        <translation type="obsolete">Arquivo Correlação (*.escor)</translation>
    </message>
    <message>
        <source>Error while trying to retrieve 3D image!</source>
        <translation>Erro ao tentar recuperar a imagem 3D!</translation>
    </message>
    <message>
        <source>Relative Permeability</source>
        <translation>Permeabilidade Relativa</translation>
    </message>
    <message>
        <source>Enter the limit iterations number:</source>
        <translation>Digite o número limite de iterações:</translation>
    </message>
    <message>
        <source>0.00000001</source>
        <translation type="obsolete">0.00000001</translation>
    </message>
    <message>
        <source>0.00000010</source>
        <translation type="obsolete">0.00000010</translation>
    </message>
    <message>
        <source>0.00000100</source>
        <translation type="obsolete">0.00000100</translation>
    </message>
    <message>
        <source>0.00001000</source>
        <translation type="obsolete">0.00001000</translation>
    </message>
    <message>
        <source>0.00010000</source>
        <translation type="obsolete">0.00010000</translation>
    </message>
    <message>
        <source>0.00100000</source>
        <translation type="obsolete">0.00100000</translation>
    </message>
    <message>
        <source>0.01000000</source>
        <translation type="obsolete">0.01000000</translation>
    </message>
    <message>
        <source>Enter the limit error number:</source>
        <translation>Digite o número limite de erro:</translation>
    </message>
    <message>
        <source>Error trying to determine the equilibrium configurations!</source>
        <translation type="obsolete">Erro ao tentar determinar as configurações de equilíbrio!</translation>
    </message>
    <message>
        <source>Erro! - Correlation class returned false!</source>
        <translation type="obsolete">Erro! - Classe correlação retornou falso!</translation>
    </message>
    <message>
        <source>Porosity of the image &quot;%1&quot;	= %2%
</source>
        <translation>\nPorosidade da imagem \&quot;%1\&quot;	= %2\%\n</translation>
    </message>
    <message>
        <source>
Average porosity = %1%
</source>
        <translation type="obsolete">\nPorosidade média = %1\%\n</translation>
    </message>
    <message>
        <source>&amp;%1 %2%3%4</source>
        <translation type="obsolete">&amp;%1 %2%3%4</translation>
    </message>
    <message>
        <source>%1 %2%3%4</source>
        <translation type="obsolete">%1 %2%3%4</translation>
    </message>
    <message>
        <source>Accepted Files (*.pgm *.pbm *.dbm *.dgm *.cor *.rpc);;Relative Permeability Curves (*.rpc);;Image Files (*.pgm *.pbm *.dbm);;Grey Scale Images (*.pgm);;3D Binary Images (*.dbm);;3DGrey Scale Images (*.dgm);;Correlation Files (*.cor);;Binary Images (*.pbm)</source>
        <translation type="obsolete">Arquivos Aceitos (*.pgm *.pbm *.dbm *.dgm *.cor *.rpc);;Curvas de Permeabilidade Relativa (*.rpc);;Arquivos de Imagens (*.pgm *.pbm *.dbm);;Imagens em Tons de Cinza (*.pgm);;Imagens 3D Binárias (*.dbm);;Imagens 3D em Tons de Cinza (*.dgm);;Arquivos Correlação (*.cor);;Imagens Binárias (*.pbm)</translation>
    </message>
    <message>
        <source>.inversion%1.%2</source>
        <translation>.inversion%1.%2</translation>
    </message>
    <message>
        <source>.inversion3D%1.%2</source>
        <translation>.inversion3D%1.%2</translation>
    </message>
    <message>
        <source>.idf%1.pgm</source>
        <translation>.idf%1.pgm</translation>
    </message>
    <message>
        <source>.idf%1.dgm</source>
        <translation>.idf%1.dgm</translation>
    </message>
    <message>
        <source>.connected%1.%2</source>
        <translation>.connected%1.%2</translation>
    </message>
    <message>
        <source>Error trying to determine the 3D connectivity!</source>
        <translation>Erro ao tentar determinar a conectividade 3D!</translation>
    </message>
    <message>
        <source>:. 3D Visualization</source>
        <translation type="obsolete">:. Visualização 3D</translation>
    </message>
    <message>
        <source>Select a value:</source>
        <translation type="obsolete">Selecione um valor:</translation>
    </message>
    <message>
        <source>Erro! - To create 3D Reconstruction</source>
        <translation>Erro! - Ao criar reconstrução 3D</translation>
    </message>
    <message>
        <source>Intrinsic Permeability</source>
        <translation>Permeabilidade Intrínseca</translation>
    </message>
    <message>
        <source>1e-10</source>
        <translation type="obsolete">1e-10</translation>
    </message>
    <message>
        <source>Intrinsic Permeability = %1</source>
        <translation type="obsolete">Permeabilidade Intrínseca = %1</translation>
    </message>
    <message>
        <source>Error trying to determine the Intrinsic Permeability!</source>
        <translation type="obsolete">Erro ao tentar determinar a Permeabilidade Intrínseca!</translation>
    </message>
    <message>
        <source>Error trying to determine the Relative Permeability!</source>
        <translation>Erro ao tentar determinar a Permeabilidade Relativa!</translation>
    </message>
    <message>
        <source>Rotate in X axis</source>
        <translation type="obsolete">Rotacionar no eixo X</translation>
    </message>
    <message>
        <source>Rotate in Y axis</source>
        <translation type="obsolete">Rotacionar no eixo Y</translation>
    </message>
    <message>
        <source>Rotate in Z axis</source>
        <translation type="obsolete">Rotacionar no eixo Z</translation>
    </message>
    <message>
        <source>Rotate</source>
        <translation type="obsolete">Rotacionar</translation>
    </message>
    <message>
        <source>Enter the axis to rotate:</source>
        <translation type="obsolete">Informe o eixo para rotacionar:</translation>
    </message>
    <message>
        <source>.rotated%1.%2</source>
        <translation>.rotated%1.%2</translation>
    </message>
    <message>
        <source>Error while trying to rotate the 3D image!</source>
        <translation type="obsolete">Erro tentando rotacionar a imagem 3D!</translation>
    </message>
    <message>
        <source>Erro! - FFT Correlation class returned false!</source>
        <translation>Erro! - Classe Correlação FFT retornou falso!</translation>
    </message>
    <message>
        <source>Erro! - Spatial Correlation class returned false!</source>
        <translation>Erro! - Classe Correlação Espacial retornou falso!</translation>
    </message>
    <message>
        <source>Pore is:</source>
        <translation>Poro é:</translation>
    </message>
    <message>
        <source>:. Skeleton</source>
        <translation>:. Esqueleto</translation>
    </message>
    <message>
        <source>Enter the mask size:</source>
        <translation>Informe o tamanho da máscara:</translation>
    </message>
    <message>
        <source>.%1-%2.%3</source>
        <translation>.%1-%2.%3</translation>
    </message>
    <message>
        <source>LVP - 3D Connectivity</source>
        <translation>LVP - Conectividade 3D</translation>
    </message>
    <message>
        <source>The image does not have connectivity on the Y axis!</source>
        <translation>A imagem não possui conectividade no eixo Y!</translation>
    </message>
    <message>
        <source>Correlation Files (*.cor)</source>
        <translation>Arquivos Correlação (*.cor)</translation>
    </message>
    <message>
        <source>Erro! - To create reconstruction dialog!</source>
        <translation>Erro! - Ao criar diálogo reconstrução!</translation>
    </message>
    <message>
        <source>Erro! - To create ES reconstruction dialog!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>1.0e-10</source>
        <translation type="unfinished">1e-10 {1.0e?}</translation>
    </message>
    <message>
        <source>1.0e-09</source>
        <translation type="unfinished">1e-09 {1.0e?}</translation>
    </message>
    <message>
        <source>1.0e-08</source>
        <translation type="unfinished">1e-08 {1.0e?}</translation>
    </message>
    <message>
        <source>1.0e-07</source>
        <translation type="unfinished">1e-07 {1.0e?}</translation>
    </message>
    <message>
        <source>1.0e-06</source>
        <translation type="unfinished">1e-06 {1.0e?}</translation>
    </message>
    <message>
        <source>1.0e-05</source>
        <translation type="unfinished">1e-05 {1.0e?}</translation>
    </message>
    <message>
        <source>1.0e-04</source>
        <translation type="unfinished">1e-04 {1.0e?}</translation>
    </message>
    <message>
        <source>1.0e-03</source>
        <translation type="unfinished">1e-03 {1.0e?}</translation>
    </message>
    <message>
        <source>1.0e-02</source>
        <translation type="unfinished">1e-02 {1.0e?}</translation>
    </message>
    <message>
        <source>1.0e-01</source>
        <translation type="unfinished">1e-01 {1.0e?}</translation>
    </message>
    <message>
        <source>Intrinsic Permeability = %1 mD</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Do you want to save images A and B?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Do you want to correct the opening image?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error creating Relative Permeability Object!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error trying to rotate the 2D image!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error trying to create 2D image!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error trying to rotate the 3D image!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error trying to create 3D image!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error: Image viewer not active!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error retrieving image!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Do you want invert the flow?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Erro! - Distribution class returned false!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Invalid file type!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;%1 3D Visualization [%2]</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>%1 3D Visualization [%2]</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Accepted Files (*.pgm *.pbm *.dbm *.dgm *.cor *.dtp *.dts *.dtg *.rpc *.txt *.rsl);;Image Files (*.pgm *.pbm *.dbm);;Binary Images (*.pbm);;3D Binary Images (*.dbm);;Grey Scale Images (*.pgm);;3DGrey Scale Images (*.dgm);;Relative Permeability Curves (*.rpc);;Correlation Files (*.cor);;Distribution Files (*.dtp *.dts *.dtg);;Network of Sites and Links (*.rsl);;Text Files (*.txt)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>File %1 loaded!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>File name error! - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error trying invert image!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error trying invert 3D image!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.lp-%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.hp-%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>:. LVP</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>LVP - Mathematical Morphology</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Write (0)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Black (1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Spatial</source>
        <translation>Espacial</translation>
    </message>
    <message>
        <source>IDF-d34</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>IDF-d5711</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Euclidean</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Kind of metric:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>IDF-d345</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.erosion3D-%1.%2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.dilation3D-%1.%2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.opening3D-%1.%2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.closing3D-%1.%2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>LVP - IDF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>:. IDF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>LVP - IRA</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.ira%1.pgm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.ira%1.dgm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>LVP - Segmentation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.objCon%1.pgm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Distribution Files (*.dtp *.dts *.dtg)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.average%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error - Was not possible to calculate the average!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.average-%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error! - Was not possible to create the average!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error! - Was not possible to calculate the average!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error to calculate the average!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Distribution Files (*.dts)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>%1%2.rpc</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.segmented%1.dgm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error trying to retrieve image!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>LVP - Rotate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Rotate on:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;X axis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Y axis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Z axis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Import RAW File</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>RAW Files (*.raw *.3fr *.ari *.arw *.srf *.sr2 *.bay *.crw *.kdc *.nrw *.orf *.rw2 *.rwz *.srw *.x3f)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Erro! - To create Import dialog!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.imported%1.dbm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.imported%1.dgm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.imported%1.dpm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Erro! - To save imported image!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.croped%1.dbm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.croped%1.dgm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>LVP - 3D Correlation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>:. 3D Correlation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enter the number of plans to be considered.
Leave 0 to consider 10% of plans of the image:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>LVP - Correlation FFT</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>LVP - Correlation Spatial</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>LVP - Solids Size Distribution</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Solid is:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>LVP - Pores Size Distribution</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.%1-%2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Erro! - Can not save the file &quot;%1&quot;!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>LVP - 3D Solids Size Distribution</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>LVP - 3D Pores Size Distribution</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>:. 3D Distribution</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.%1_%2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Erro! - Distribution3D class returned false!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>LVP - 3D pores and throats size distribution</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>:. Segmentation</source>
        <translation>:. Segmentação</translation>
    </message>
    <message>
        <source>Enter the maximum radius of the structuring element:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enter the radius for the dilatation:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enter the reduction factor of the structuring element radius:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enter the increment value for the structuring element radius:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error: 3D image is NULL!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>.distribution%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Erro! - Can not save the distribution file!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Erro! - CDistribuicaoTamanhoPorosGargantas class returned NULL!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>LVP - Porosity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>
Average = %1%
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>-(1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>-(%1).</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MainWindow</name>
    <message>
        <source>LVP - LENEP</source>
        <translation>LVP - LENEP</translation>
    </message>
    <message>
        <source>&amp;File</source>
        <translation>&amp;Arquivo</translation>
    </message>
    <message>
        <source>&amp;Edit</source>
        <translation>&amp;Editar</translation>
    </message>
    <message>
        <source>&amp;Window</source>
        <translation>&amp;Janelas</translation>
    </message>
    <message>
        <source>&amp;Help</source>
        <translation>A&amp;juda</translation>
    </message>
    <message>
        <source>&amp;View</source>
        <translation>&amp;Visualizar</translation>
    </message>
    <message>
        <source>Spatial</source>
        <translation>Espacial</translation>
    </message>
    <message>
        <source>File Tool Bar</source>
        <translation>Barra de Ferramentas Arquivo</translation>
    </message>
    <message>
        <source>Edit Tool Bar</source>
        <translation>Barra de Ferramentas Editar</translation>
    </message>
    <message>
        <source>&amp;Open</source>
        <translation>&amp;Abrir</translation>
    </message>
    <message>
        <source>Open an existing file</source>
        <translation>Abrir um arquivo existente</translation>
    </message>
    <message>
        <source>Ctrl+O</source>
        <translation>Ctrl+O</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation>&amp;Salvar</translation>
    </message>
    <message>
        <source>Save the image to disk</source>
        <translation type="obsolete">Salvar a imagem no disco</translation>
    </message>
    <message>
        <source>Ctrl+S</source>
        <translation>Ctrl+S</translation>
    </message>
    <message>
        <source>Save &amp;As...</source>
        <translation>Salvar &amp;Como...</translation>
    </message>
    <message>
        <source>Save the image under a new name</source>
        <translation type="obsolete">Salvar a imagem com um novo nome</translation>
    </message>
    <message>
        <source>&amp;Exit</source>
        <translation>Sai&amp;r</translation>
    </message>
    <message>
        <source>Exit the application</source>
        <translation>Sair do programa</translation>
    </message>
    <message>
        <source>Ctrl+Q</source>
        <translation>Ctrl+Q</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation>&amp;Copiar</translation>
    </message>
    <message>
        <source>Ctrl+C</source>
        <translation>Ctrl+C</translation>
    </message>
    <message>
        <source>Cl&amp;ose</source>
        <translation>&amp;Fechar</translation>
    </message>
    <message>
        <source>Close the active window</source>
        <translation>Fechar a janela ativa</translation>
    </message>
    <message>
        <source>Ctrl+F4</source>
        <translation>Ctrl+F4</translation>
    </message>
    <message>
        <source>Close &amp;All</source>
        <translation>Fechar &amp;Todas</translation>
    </message>
    <message>
        <source>Close all the windows</source>
        <translation>Fechar todas as janelas</translation>
    </message>
    <message>
        <source>Ctrl+Shift+F4</source>
        <translation>Ctrl+Shift+F4</translation>
    </message>
    <message>
        <source>&amp;Title</source>
        <translation>&amp;Título</translation>
    </message>
    <message>
        <source>Tile the windows</source>
        <translation>Janleas em Título</translation>
    </message>
    <message>
        <source>&amp;Cascade</source>
        <translation>&amp;Cascata</translation>
    </message>
    <message>
        <source>Cascade the windows</source>
        <translation>Janelas em Cascata</translation>
    </message>
    <message>
        <source>Ne&amp;xt</source>
        <translation>Pró&amp;ximo</translation>
    </message>
    <message>
        <source>Move the focus to the next window</source>
        <translation>Mover o foco para a próxima janela</translation>
    </message>
    <message>
        <source>Ctrl+Tab</source>
        <translation type="obsolete">Ctrl+Tab</translation>
    </message>
    <message>
        <source>Pre&amp;vious</source>
        <translation>&amp;Anterior</translation>
    </message>
    <message>
        <source>Move the focus to the previous window</source>
        <translation>Mover o foco para a janela anterior</translation>
    </message>
    <message>
        <source>Ctrl+Backspace</source>
        <translation type="obsolete">Ctrl+Backspace</translation>
    </message>
    <message>
        <source>&amp;About</source>
        <translation>&amp;Sobre</translation>
    </message>
    <message>
        <source>Show the application&apos;s About box</source>
        <translation>Mostrar caixa Sobre a aplicação</translation>
    </message>
    <message>
        <source>About &amp;Qt</source>
        <translation>Sobre &amp;Qt</translation>
    </message>
    <message>
        <source>Show the Qt library&apos;s About box</source>
        <translation>Mostrar caixa Sobre a biblioteca Qt</translation>
    </message>
    <message>
        <source>Zoom &amp;in (25%)</source>
        <translation>Aproximar &amp;em (25%)</translation>
    </message>
    <message>
        <source>Ctrl++</source>
        <translation>Ctrl++</translation>
    </message>
    <message>
        <source>Zoom &amp;Out (25%)</source>
        <translation>Afastar E&amp;m (25%)</translation>
    </message>
    <message>
        <source>Ctrl+-</source>
        <translation>Ctrl+-</translation>
    </message>
    <message>
        <source>&amp;Normal Size</source>
        <translation>&amp;Tamanho Normal</translation>
    </message>
    <message>
        <source>Ctrl+=</source>
        <translation>Ctrl+=</translation>
    </message>
    <message>
        <source>&amp;Fit to Window</source>
        <translation>&amp;Ajustar à Janela</translation>
    </message>
    <message>
        <source>Ctrl+F</source>
        <translation>Ctrl+F</translation>
    </message>
    <message>
        <source>&amp;Print</source>
        <translation>Im&amp;primir</translation>
    </message>
    <message>
        <source>Ctrl+P</source>
        <translation>Ctrl+P</translation>
    </message>
    <message>
        <source>Low Pass</source>
        <translation>Passa Baixa</translation>
    </message>
    <message>
        <source>High Pass</source>
        <translation>Passa Alta</translation>
    </message>
    <message>
        <source>Copy the current image to the clipboard</source>
        <translation type="obsolete">Copiar a imagem atual para a área de tranferência</translation>
    </message>
    <message>
        <source>Fil&amp;ters</source>
        <translation>Fil&amp;tros</translation>
    </message>
    <message>
        <source>Morphology</source>
        <translation>Morfologia</translation>
    </message>
    <message>
        <source>&amp;Relative Permeability</source>
        <translation type="obsolete">Permeabilidade &amp;Relativa</translation>
    </message>
    <message>
        <source>:. Images List</source>
        <translation>:. Lista de Imagens</translation>
    </message>
    <message>
        <source>View Tool Bar</source>
        <translation>Barra de Ferramentoas Visualizar</translation>
    </message>
    <message>
        <source>Filters Spacial Tool Bar</source>
        <translation type="obsolete">Barra de Ferramentas Filtro Espacial</translation>
    </message>
    <message>
        <source>Window Tool Bar</source>
        <translation>Barra de Ferramentas Janelas</translation>
    </message>
    <message>
        <source>Erosion</source>
        <translation>Erosão</translation>
    </message>
    <message>
        <source>Dilation</source>
        <translation>Dilatação</translation>
    </message>
    <message>
        <source>Closing</source>
        <translation>Fechamento</translation>
    </message>
    <message>
        <source>English</source>
        <translation type="obsolete">Inglês</translation>
    </message>
    <message>
        <source>&amp;Language</source>
        <translation type="obsolete">&amp;Linguagem</translation>
    </message>
    <message>
        <source>Opening</source>
        <translation>Abertura</translation>
    </message>
    <message>
        <source>Equilibrium Configuration</source>
        <translation type="obsolete">Configurações de Equilíbrio</translation>
    </message>
    <message>
        <source>Reconstruction</source>
        <translation type="obsolete">Reconstrução</translation>
    </message>
    <message>
        <source>:. Plan of the 3D Image</source>
        <translation type="obsolete">:. Plano da imagem 3D</translation>
    </message>
    <message>
        <source>No File Selected</source>
        <translation type="obsolete">Nenum Arquivo Selecionado</translation>
    </message>
    <message>
        <source>:. 3D Images List</source>
        <translation>:. Lista de Imagens 3D</translation>
    </message>
    <message>
        <source>&amp;Characterization</source>
        <translation>&amp;Caracterização</translation>
    </message>
    <message>
        <source>Porosity</source>
        <translation>Porosidade</translation>
    </message>
    <message>
        <source>3D Visualization</source>
        <translation>Visualização 3D</translation>
    </message>
    <message>
        <source>Correlation</source>
        <translation>Correlação</translation>
    </message>
    <message>
        <source>&amp;Reconstruction</source>
        <translation>&amp;Reconstrução</translation>
    </message>
    <message>
        <source>:. Charts List</source>
        <translation>:. Lista de Gráficos</translation>
    </message>
    <message>
        <source>Truncade Gaussiana</source>
        <translation>Gaussiana Truncada</translation>
    </message>
    <message>
        <source>View Mode</source>
        <translation>Modo de Visualização</translation>
    </message>
    <message>
        <source>View Mode (Tabbed or Window)</source>
        <translation>Modo de Visualização (Abas ou Janela)</translation>
    </message>
    <message>
        <source>Relative Permeability</source>
        <translation>Permeabilidade Relativa</translation>
    </message>
    <message>
        <source>Frequency</source>
        <translation>Frequência</translation>
    </message>
    <message>
        <source>Superposed Spheres</source>
        <translation>Esferas Sobrepostas</translation>
    </message>
    <message>
        <source>3D Filters</source>
        <translation>Filtros 3D</translation>
    </message>
    <message>
        <source>Invert</source>
        <translation>Inverter</translation>
    </message>
    <message>
        <source>Invert pore</source>
        <translation>Inverter poro</translation>
    </message>
    <message>
        <source>Connectivity</source>
        <translation>Conectividade</translation>
    </message>
    <message>
        <source>Inversion</source>
        <translation>Inversão</translation>
    </message>
    <message>
        <source>IDF</source>
        <translation>IDF</translation>
    </message>
    <message>
        <source>Rotate</source>
        <translation>Rotacionar</translation>
    </message>
    <message>
        <source>Intrinsic Permeability</source>
        <translation>Permeabilidade Intrínseca</translation>
    </message>
    <message>
        <source>Skeleton</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Idiom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Save to disk</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Save under a new name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Copy to the clipboard</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Zoom in (25%)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Zoom Out (25%)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Normal Size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Fit to Window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Print</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Low Pass filter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>High Pass filter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Erosion Filter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>V1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>V2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>V3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>V4</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Zhang Suen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Multi Plan View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Distribution of Solids Size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Distribution of Pores Size </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Segmentation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>:. Controlling Multi Plan View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Axis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0//EN&quot; &quot;http://www.w3.org/TR/REC-html40/strict.dtd&quot;&gt;
&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Tahoma&apos;; font-size:10pt; font-weight:600; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;&lt;span style=&quot; color:#00ff00;&quot;&gt;X&lt;/span&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0//EN&quot; &quot;http://www.w3.org/TR/REC-html40/strict.dtd&quot;&gt;
&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Tahoma&apos;; font-size:10pt; font-weight:600; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;&lt;span style=&quot; color:#0000ff;&quot;&gt;Y&lt;/span&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0//EN&quot; &quot;http://www.w3.org/TR/REC-html40/strict.dtd&quot;&gt;
&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Tahoma&apos;; font-size:10pt; font-weight:600; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;&lt;span style=&quot; color:#ff0000;&quot;&gt;Z&lt;/span&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>:. Text Editors List</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>:. Messages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ctrl+Shift+S</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ctrl+Right</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ctrl+Left</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Equilibrium Configurations</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>d34 Metric</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Open Source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>d5711 Metric</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Euclidian Metric</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>d345 Metric</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Increase X</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Increase X value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Right</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Decrease X</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Decrease X value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Left</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Increase Y</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Increase Y value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Up</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Decrease Y</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Decrease Y value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Down</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Increase Z</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Increase Z value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>PgUp</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Decrease Z</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Decrease Z value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>PgDown</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Multiplanar Viewer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Import...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Import...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ctrl+I</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Connected Objects</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Pores and Throats</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pores and Throats</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Crop 3D</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Distribution of Pores/Throats Size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>IRA</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pore Network Viewer</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>OptionsDialog</name>
    <message>
        <source>QHexEdit - Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Flags</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ReadOnly</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Higlighting</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Overwrite Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Address Area</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ascii Area</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Colors and Fonts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Highlighting Color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Address Area Color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Selection Color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Widget Font</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>01 23 45 67 89 ab cd ef</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Address Area Width</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PbmImageViewer</name>
    <message>
        <source>LVP</source>
        <translation type="unfinished">LVP</translation>
    </message>
    <message>
        <source>Error! - Cannot load %1.</source>
        <translation type="unfinished">Erro! - Não foi possivel carregar %1.</translation>
    </message>
    <message>
        <source>Error! - Cannot load image.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Save As</source>
        <translation type="unfinished">Salvar Como</translation>
    </message>
    <message>
        <source>pbm Images (*.pbm)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error! - Can&apos;t create image.</source>
        <translation type="unfinished">Erro! - Não foi possível criar imagem.</translation>
    </message>
    <message>
        <source>Saving Format:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Binary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>A&amp;ligned ASCII</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;ASCII</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error! - Can&apos;t save file &quot;%1&quot;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PgmImageViewer</name>
    <message>
        <source>LVP</source>
        <translation type="unfinished">LVP</translation>
    </message>
    <message>
        <source>Error! - Cannot load %1.</source>
        <translation type="unfinished">Erro! - Não foi possivel carregar %1.</translation>
    </message>
    <message>
        <source>Error! - Cannot load image.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Save As</source>
        <translation type="unfinished">Salvar Como</translation>
    </message>
    <message>
        <source>pgm Images (*.pgm)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error! - Can&apos;t create image.</source>
        <translation type="unfinished">Erro! - Não foi possível criar imagem.</translation>
    </message>
    <message>
        <source>Saving Format:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Binary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>A&amp;ligned ASCII</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;ASCII</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error! - Can&apos;t save file &quot;%1&quot;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Ploter</name>
    <message>
        <source>Oil-%1</source>
        <translation>Óleo-%1</translation>
    </message>
    <message>
        <source>Water-%1</source>
        <translation>Água-%1</translation>
    </message>
    <message>
        <source>LVP</source>
        <translation>LVP</translation>
    </message>
    <message>
        <source>Limit number of curves reached!</source>
        <translation>Número limite de curvas alcançado!</translation>
    </message>
    <message>
        <source>The file &quot;%1&quot; has been plotted!</source>
        <translation>O arquivo \&quot;%1\&quot; foi plotado!</translation>
    </message>
    <message>
        <source>Save As</source>
        <translation>Salvar Como</translation>
    </message>
    <message>
        <source>Correlation Files (*.cor)</source>
        <translation>Arquivos Correlação (*.cor)</translation>
    </message>
    <message>
        <source>Distribution Files (*.dtp)</source>
        <translation>Arquivos Correlação (*.cor)</translation>
    </message>
    <message>
        <source>Relative Permeability Curves (*.rpc)</source>
        <translation>Curvas de Permeabilidade Relativa (*.rpc)</translation>
    </message>
    <message>
        <source>Erro! - Was not informed a valid name to the file!</source>
        <translation type="obsolete">Erro! - Não foi informado um nome válido para o arquivo!</translation>
    </message>
    <message>
        <source>Erro! - Was not possible to open the file!</source>
        <translation>Erro! - Não foi possível abrit o arquivo!</translation>
    </message>
    <message>
        <source>Erro! - Was not possible to copy the file!</source>
        <translation>Erro! - Não foi possível copiar o arquivo!</translation>
    </message>
    <message>
        <source>&apos;%1&apos; isn&apos;t save.
Do you want to save it?</source>
        <translation>&apos;%1&apos; não está salvo.
Você deseja salvá-lo?</translation>
    </message>
    <message>
        <source>accumulated-%1</source>
        <translation>acumulado-%1</translation>
    </message>
    <message>
        <source>%1%2</source>
        <translation>%1%2</translation>
    </message>
    <message>
        <source>Distribution Files (*.dts)</source>
        <translation>Arquivos Distribuição (*.dts)</translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <source>Working on %1 cores.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Loading Main Window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Main Window Loaded.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Reconstruction</name>
    <message>
        <source>Open File</source>
        <translation>Abrir Arquivo</translation>
    </message>
    <message>
        <source>Correlation File (*.cor)</source>
        <translation>Arquivo Correlação (*.cor)</translation>
    </message>
</context>
<context>
    <name>ReconstructionES</name>
    <message>
        <source>Open File</source>
        <translation>Abrir Arquivo</translation>
    </message>
    <message>
        <source>Correlation File (*.cor)</source>
        <translation type="obsolete">Arquivo Correlação (*.cor)</translation>
    </message>
    <message>
        <source>Correlation File (*.dts)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TextEditor</name>
    <message>
        <source>Application</source>
        <translation>Aplicação</translation>
    </message>
    <message>
        <source>Cannot read file %1:
%2.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Save As</source>
        <translation>Salvar Como</translation>
    </message>
    <message>
        <source>All Files (*)</source>
        <translation>Todos os Arquivos (*)</translation>
    </message>
    <message>
        <source>.: LVP</source>
        <translation>.: LVP</translation>
    </message>
    <message>
        <source>Cannot write file %1:
%2.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>The document has been modified.
Do you want to save your changes?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>%1[*]</source>
        <translation type="unfinished"></translation>
    </message>
</context>
</TS>