Skip to content

Latest commit

 

History

History
151 lines (107 loc) · 5.68 KB

FAQ.md

File metadata and controls

151 lines (107 loc) · 5.68 KB
Raw

FAQ

In this document are tips and hints documented which can help for troubleshooting on RouDi.

Does iceoryx run in a docker environment?

Yes. Take a look at the icedocker example

How can I find out if RouDi is running?

RouDi uses a file locking machanism to ensure that only one RouDi instance is running at a time. For that RouDi creates and locks /tmp/roudi.lock. The file exists also also when RouDi is not running. Try locking this file, if this fails RouDi is running.

On the command line do

flock -n /tmp/roudi.lock echo "RouDi is not running"

Missing samples in a publish subscribe scenario

Lost samples are not acceptable for your system? Is your publisher sending at a higher frequency than the subscribers are taking the samples?

Either

  • Make sure that the receiving frequency is higher than the publishing one

or

!!! caution The usage of the blocking publisher feature needs to be considered carefully as other subscribers will not receive samples while the publisher is blocked.

A possible alternative is

  • Increase SubscriberOptions::queueCapacity to up to 256
    • If 256 is not enough, increase the maximum value IOX_MAX_CHUNKS_HELD_PER_SUBSCRIBER_SIMULTANEOUSLY via the CMake switch

Solving the error MEPOO__MEMPOOL_GETCHUNK_POOL_IS_RUNNING_OUT_OF_CHUNKS

Possible solutions are one of the following:

  1. Increase memory configuration of RouDi
  2. Make sure that the receiving frequency is higher than the publishing one
  3. Reduce SubscriberOptions::queueCapacity to hold less samples in the mempool on the subscriber side
  4. Consider using the blocking publisher feature. The usage needs to be considered carefully as other subscribers will not receive samples while the publisher is blocked.

!!! caution The usage of the blocking publisher feature needs to be considered carefully as other subscribers will not receive samples while the publisher is blocked.

iox-roudi fails on startup

An error message like

user@iceoryx-host:/# iox-roudi
Log level set to: [Warning]
SharedMemory still there, doing an unlink of /iceoryx_mgmt
Reserving 59736448 bytes in the shared memory [/iceoryx_mgmt]
[ Reserving shared memory successful ]
SharedMemory still there, doing an unlink of /root
Reserving 27902400 bytes in the shared memory [/root]
While setting the acquired shared memory to zero a fatal SIGBUS signal appeared
caused by memset. The shared memory object with the following properties
[ name = /root, sizeInBytes = 27902400, access mode = AccessMode::READ_WRITE,
ownership = OwnerShip::MINE, baseAddressHint = (nil), permissions = 0 ] maybe
requires more memory than it is currently available in the system.

indicates that there is not enough shared memory available. Check with

df -H /dev/shm

if you have enough memory available. In this exemplary error message we require 59736448 (iceoryx management data) + 27902400 (user samples) ~ 83.57mb of shared memory.

Stack size handling

The iceoryx middleware utilize stack memory from the system for book-keeping of internal structures. Most Linux distributions offers 8 Megabyte of stack memory for a process which is enough for iceoryx. You can check this with the output from ulimit -a.

On other platforms like windows other rules apply for the stack memory. On windows there is only 1 Megabyte of stack available. Increasing the stack size generally on iceoryx is not recommended since Roudi could consume lots of memory without using it. Especially using RouDi in a multi-threaded context can run out the stack memory and lead to memory errors.

The Single process example shows that when compiling and executing it on windows. Without setting the stack size the application will throw a Stack overflow exception when entering the main() method.

This can be solved in CMake by adding a linker flag:

target_link_options(single_process BEFORE PRIVATE /STACK:3500000)

For other platforms apply other flags or solutions.

CI fails but error is locally not reproducable

One can use tools/scripts/ice_env.sh to create an iceoryx development environment with a configuration very similar to the CI target. When for instance the target ubuntu 18.04 fails one can create a docker container with

cd tools/scripts
./ice-env.sh enter ubuntu:18.04

This starts the container, installs all dependencies which iceoryx requires and enters the environment.

docker

When you are in a docker environment check if there is enough memory available in your docker.

# docker stats
CONTAINER ID   NAME            CPU %     MEM USAGE / LIMIT   MEM %     NET I/O       BLOCK I/O     PIDS
367b9fae6c2f   nifty_galileo   0.00%     4.48MiB / 1GiB      0.44%     11.6kB / 0B   17.6MB / 0B   1

If not you can restart the docker container with --shm-size="2g" to increase the total amount of available shared memory.

docker run -it --shm-size="2g" ubuntu

Termination of RouDi and processes

To avoid undefined behavior of iceoryx posh it is recommended to terminate RouDi and the corresponding middleware processes with SIGINT or SIGTERM. In RouDi, we have integrated a sighandler that catches the signals and gives RouDi the chance to exit and clean-up everything. This also applies for processes. Therefore, we recommend adding a signalhandler to your process (see this example).