Skip to content

Latest commit

 

History

History
4066 lines (3402 loc) · 386 KB

CHANGELOG.md

File metadata and controls

4066 lines (3402 loc) · 386 KB
Raw

Change Log

Unreleased (development branch)

[Added] Support for modeling components with internal dynamics (DAE)

The new base class ChExternalDynamicsDAE allows modeling and inclusion in a Chrono system of a physics item that carries its own dynamics, described as a set of 2nd order, index-3 Differential Algebraic Equations (DAE). The states and constraints of such components are appended to those of the containing system and are integrated simultaneously with the system's equations of motion. These states can be accessed and used coupled with other components.

The general form of the initial value DAE problem is:

$$\begin{array}{l} M\ddot y + C_y^T \lambda = F(t,y,\dot y)\\\ C(t,y) = 0 \end{array}$$

with

$$\begin{array}{l} y_0 = y(t_0)\\\ \dot y_0 = \dot y(t_0) \end{array}$$

A user-provided modeling element inherits from ChExternalDynamicsDAE and defines the DAE initial value problem by implementing, at a minimum, the functions SetInitialConditions (to provide the DAE initial conditions), CalculateMassMatrix (to provide the DAE mass matrix $M$), CalculateForce (to provide the generalized force vector $F$), CalculateConstraintViolation (to provide the vector of constraint violations $C$), and CalculateConstraintJacobian (to provide the constraint Jacobian $C_y$). Optionally, for stiff DAE systems, a derived class may also implement CalculateForceJacobian to provide the Jacobian of the generalized force with respect to the DAE states and state derivatives and, if the system is rheonomous, the function CalculateConstraintDerivative to provide the partial derivative with respect to time of the constrain violations. If neded and not provided, these derivatives are approximated using forward finite-differences.

This mechanism can be used to include external, black-box dynamics components into a Chrono simulation (e.g., controllers, actuators, ADAS vehicle components, etc.).

A simple illustration of using this new feature is provided in demo_MBS_external_dynamics_DAE for solving the equations of motion of a simple rigid pendulum in various forms. For example, the full definition of the user-provided derived class for a 2D simple pendulum is:

/// Simple 2D pendulum modeled as a DAE.
/// - 3 states: (x,y) and pendulum angle.
/// - 3 state derivatives.
/// - 2 constraints.
class Pendulum2D_DAE : public ChExternalDynamicsDAE {
  public:
    Pendulum2D_DAE(double L, double mass) : g(9.8), L(L), m(mass), I(mass * L * L / 3) {}

    virtual Pendulum2D_DAE* Clone() const override { return new Pendulum2D_DAE(*this); }

    virtual unsigned int GetNumStates() const override { return 3; }
    virtual unsigned int GetNumStateDerivatives() const override { return 3; }
    virtual unsigned int GetNumAlgebraicConstraints() const override { return 2; }

    virtual bool InExplicitForm() const override { return false; }
    virtual bool IsStiff() const override { return false; }

    virtual void SetInitialConditions(ChVectorDynamic<>& y0, ChVectorDynamic<>& yd0) override {
        y0(0) = L;  // x
        y0(1) = 0;  // y
        y0(2) = 0;  // theta

        yd0.setZero();
    }

    virtual void CalculateMassMatrix(ChMatrixDynamic<>& M) override {
        M.setZero();
        M(0, 0) = m;
        M(1, 1) = m;
        M(2, 2) = I;
    }

    virtual bool CalculateMassTimesVector(const ChVectorDynamic<>& v, ChVectorDynamic<>& Mv) override {
        Mv(0) = m * v(0);
        Mv(1) = m * v(1);
        Mv(2) = I * v(2);

        return true;
    }

    virtual void CalculateForce(double time,
                                const ChVectorDynamic<>& y,
                                const ChVectorDynamic<>& yd,
                                ChVectorDynamic<>& F) override {
        F(0) = 0;
        F(1) = -m * g;
        F(2) = 0;
    }

    virtual void CalculateConstraintViolation(double time, const ChVectorDynamic<>& y, ChVectorDynamic<>& c) override {
        c(0) = y(0) - L * std::cos(y(2));  // x = L * cos(theta)
        c(1) = y(1) - L * std::sin(y(2));  // y = L * sin(theta)
    }

    virtual void CalculateConstraintJacobian(double time,
                                             const ChVectorDynamic<>& y,
                                             const ChVectorDynamic<>& c,
                                             ChMatrixDynamic<>& J) override {
        J(0, 0) = 1;
        J(0, 1) = 0;
        J(0, 2) = L * std::sin(y(2));

        J(1, 0) = 0;
        J(1, 1) = 1;
        J(1, 2) = -L * std::cos(y(2));
    }

  private:
    double g;  // gravitational acceleration
    double L;  // pendulum half-length
    double m;  // pendulum mass
    double I;  // pendulum moment of inertia
};

Note: for consistency, the previous ChExternalDynamics was renamed to ChExternalDynamicsODE.

[Changed] Eigensolvers refactoring

All Chrono eingesolvers share some common features:

  • solve generalized eigenvalue problems i.e. A*v = lambda*B*v
  • are iterative and based on shift-and-invert methods
  • deal with real-valued matrices, but may have complex shifts and/or eigenpairs

but they differ depending if the A and B matrices are symmetric (ChSym____) or not (ChUnsym____).

The name pattern is now changed to Ch[Sym|Unsym]GenEigenvalueSolver to clarify this difference.

These eigenvalue solvers are meant to deal directly with matrices, not with Chrono ChSystems nor with ChAssemblys. This is indeed a task for ChModalSolver classes.

The modal solvers are split into undamped and damped versions but, while the undamped case can generate either symmetric or unsymmetric problems, the damped case matrices are always unsymmetric. Because of this, different modal solvers may be equipped with different eigensolvers.

Further details are explained in the documentation.

Release 9.0.1 (2024-07-03)

[Fixed] Bug fixes in FSI solver

  • Use different formulas for computing BCE marker forces for the explicit and implicit SPH solvers (intermediate vector represents particle accelerations in the explicit solver, but represents particle forces in the implicit solvers).
  • Fix GridSampler to generate points fully covering the specified sampling domain.
  • Fix Chrono::FSI demos related to solid inertia properties, collision shapes, and BCE marker generation.
  • Add missing velocity setting for FSI particle visualization.

[Fixed] Miscellaneous bug fixes

  • Add checks for CUDA and Thrust versions at configuration time (latest supported versions are CUDA 12.3.2 and Thrust 2.2.0). Disable Chrono::Multicore and GPU-based Chrono modules for newer versions.
  • Fix calculation of relative position, velocity, and acceleration for ChLinkMate.
  • Fix calculation of relative frames on connected bodies for ChLinkDistance.
  • Implement tolerance-based stopping criteria for the Barzilai-Borwein solver.
  • Fix bug in inflating the axis-aligned bounding box for a ChGeometry object.
  • Fix bug in ChTimer::GetTimeMilliseconds which was previously reporting the elapsed time in microseconds.

Release 9.0.0 (2024-05-20)

[Changed] Default number of threads

The default values for the number of OpenMP threads used in various parts of Chrono were changed to be always 1. The user is responsible to adjust these settings to values that are appropriate to their problem and hardware.

This affects OpenMP settings for the Chrono system and the PardisoMKL direct sparse linear solver.

  • the function ChSystem::SetNumThreads controls the following values:

    • num_threads_chrono: number of OpenMP threads used in FEA (for parallel evaluation of internal forces and their Jacobians) and in the SCM deformable terrain (for parallel ray casting).
    • num_threads_collision: number of OpenMP threads used by the collision detection algorithms (Bullet or Multicore).
    • num_threads_eigen: number of threads used in the Eigen sparse direct solvers (SparseLU and SparseQR) and a few linear algebra operations. Note that Eigen enables multi-threaded execution only under certain conditions (consult the Eigen documentation).

  • the constructor for ChSolverPardisoMKL takes as an argument the number of OpenMP threads passed to MKL (default: 1) and used during the setup and solve phases.

[Changed] Refactoring of class and function names

For consistency and uniformity, many classes and functions were renamed, modified, or even obsoleted. Note that this represents a major public API change and we expect most user code will need to be updated to reflect these changes.

The main changes are collected in the following tables. These can serve as a "dictionary" for converting existing user codes to the new Chrono API. Please make sure to also read the notes at the end of this log entry where we provide more details on changes that went beyond simple class or function renaming.

Header files

File Action
ChBitmaskEnums.h remove
ChController.h rename: ChControllers.h
ChDistribution.h rename: ChRandom.h
ChException.h remove
ChFunction_Const.h rename: ChFunctionConst.h
ChFunction_BSpline.h rename: ChFunctionBSpline.h
ChFunction_ConstAcc.h rename: ChFunctionConstAcc.h
ChFunction_DoubleS.h rename: ChFunctionConstJerk.h
ChFunction_Cycloidal.h rename: ChFunctionCycloidal.h
ChFunction_Derive.h rename: ChFunctionDerivative.h
ChFunction_Fillet3.h rename: ChFunctionFillet3.h
ChFunction_Integrate.h rename: ChFunctionIntegral.h
ChFunction_Lambda.h rename: ChFunctionLambda.h
ChFunction_Mirror.h rename: ChFunctionMirror.h
ChFunction_Mocap.h remove
ChFunction_Noise.h remove
ChFunction_Operation.h rename: ChFunctionOperator.h
ChFunction_Oscilloscope.h remove
ChFunction_Poly345.h rename: ChFunctionPoly345.h
ChFunction_Poly.h rename: ChFunctionPoly.h
ChFunction_Ramp.h rename: ChFunctionRamp.h
ChFunction_Recorder.h rename: ChFunctionInterp.h
ChFunction_Repeat.h rename: ChFunctionRepeat.h
ChFunction_Sequence.h rename: ChFunctionSequence.h
ChFunction_Sigma.h rename: ChFunctionPoly23.h
ChFunction_Sine.h rename: ChFunctionSine.h
ChFunction_Setpoint.h rename: ChFunctionSetpoint.h
ChFunctionPosition_line.h rename: ChFunctionPositionLine.h
ChFunctionPosition_setpoint.h rename: ChFunctionPositionSetpoint.h
ChFunctionPosition_XYZfunctions.h rename: ChFunctionPositionXYZFunctions.h
ChFunctionRotation_ABCfunctions.h rename: ChFunctionRotationABCFunctions.h
ChFunctionRotation_axis.h rename: ChFunctionRotationAxis.h
ChFunctionRotation_setpoint.h rename: ChFunctionRotationSetpoint.h
ChFunctionRotation_spline.h rename: ChFunctionRotationBSpline.h
ChFunctionRotation_SQUAD.h rename: ChFunctionRotationSQUAD.h
ChFx.h remove
ChKblock.h remove
ChKblockGeneric.h rename: ChKRMBlock.h
ChLimit.h rename: ChLinkLimit.h
ChLineBspline.h rename: ChLineBSpline.h
ChLinkBeamIGAslider.h rename: ChLinkBeamIGAFrame.h
ChLinkBrake.h rename: ChLinkLockBrake.h
ChLinkClearance.h rename: ChLinkLockClearance.h
ChLinkDirFrame.h rename: ChLinkNodeSlopeFrame.h
ChLinkGear.h rename: ChLinkLockGear.h
ChLinkLinActuator.h rename: ChLinkLockLinActuator.h
ChLinkPointFrame.h rename: ChLinkNodeFrame.h
ChLinkPointPoint.h rename: ChLinkNodeNode.h
ChLinkPointSpline.h rename: ChLinkLockPointSpline.h
ChLinkPointTriface.h rename: ChLinkNodeFace.h
ChLinkPulley.h rename: ChLinkLockPulley.h
ChLinkRackpinion.h remove: merged into ChLinkMate.h
ChLinkScrew.h rename: ChLinkLockScrew.h
ChLinkTrajectory.h rename: ChLinkLockTrajectory.h
ChLists.h remove
ChLoadsXYZnode.h rename: ChLoadsNodeXYZ.h
ChLoadsZYZROTnode.h rename: ChLoadsNodeXYZRot.h
ChLog.h remove
ChMaterialSurface.h rename: ChContactMaterial.h
ChMaterialSurfaceNSC.h rename: ChContactMaterialNSC.h
ChMaterialSurfaceSMC.h rename: ChContactMaterialSMC.h
ChMath.h remove
ChMathematics.h remove and replace with:
ChConstants.h
ChUtils.h
ChShaftsBody.h rename: ChShaftBodyConstraint.h
ChShaftsMotorAngle.h rename: ChShaftsMotorPosition.h
ChShaftsMotorTorque.h rename: ChShaftsMotorLoad.h
ChSolvmin.h remove
ChStream.h remove
ChUpdateFlags.h remove
ChVector.h rename: ChVector3.h

Classes and functions

The following table summarizes all changes in class and member function names. The table is sorted in alphabetical order of the old class name (in the 1st column) and then in alphabetical order of the old member function name (in the 2nd column). The 3rd column specifies the action taken on that class or function: remove (indicating obsoleted functionality) or renamed (in which case the new class or function name is provided). In some instances, the reader is directed to the "Notes" section for more details.

Class Function Action
- make_ChFunctionLambda remove
- make_shared_ChFunctionLambda remove
- ChAtan2 remove
- ChClamp relocate to utils/ChUtils.h
- ChClampValue relocate to utils/ChUtils.h
- ChGetRandomSeed remove
- ChMax remove
- ChMin remove
- ChPeriodicPar remove
ChRandom replace with: ChRandom::Get
- ChSetRandomSeed replace with: ChRandom::SetSeed
- ChSignum relocate to utils/ChUtils.h
- ChSineStep implemented in ChFunctionSineStep
- GetUniqueIntID remove
- GetLog remove
- SetFirstIntID remove
- SetLog remove
- SetLogDefault remove
- StreamInDenseMAtlabFormat remove
- StreamOutDenseMatlabFormat rename: ChStreamOut
- StreamOutSparseMatlabFormat rename: ChStreamOut (0- or 1- indexed option)
- XdirToDxDyDz remove
ChAbsorbed_Power_Vertical rename: ChAbsorbedPowerVertical
ChAparticle rename: ChParticle
ChArchiveFmu rename: ChOutputFMU
ChArchiveAsciiDump rename: ChOutputASCII
ChArchiveExplorer rename: ChObjectExplorer
ChAssembly
Get_bodylist rename: GetBodies
Get_linklist rename: GetLinks
Get_meshlist rename: GetMeshes
Get_otherphysicslist rename: GetShafts
Get_shaftslist rename: GetOtherPhysicsItems
GetForceList rename: GetForces
GetMarkerList rename: GetMarkers
GetNbodies rename: GetNumBodiesActive
GetNbodiesFixed rename: GetNumBodiesFixed
GetNbodiesSleeping rename: GetNumBodiesSleeping
GetNbodiesTotal rename: GetNumBodies
GetNcontacts rename: GetNumContacts
GetNcoords rename: GetNumCoordsPosLevel
GetNcoords_w rename: GetNumCoordsVelLevel
GetNdoc remove: no constraints at position level
GetNdoc_w rename: GetNumConstraints
GetNdoc_w_C rename: GetNumConstraintsBilateral
GetNdoc_w_D rename: GetNumConstraintsUnilateral
GetNdof remove: it was a rough estimate
GetNlinks rename: GetNumLinksActive
GetNmeshes rename: GetNumMeshes
GetNphysicsItems rename: GetNumOtherPhysicsItemsActive
GetNshafts rename: GetNumShafts
GetNshaftsFixed rename: GetNumShaftsFixed
GetNshaftsSleeping rename: GetNumShaftsSleeping
GetNshaftsTotal rename: GetNumShaftsTotal
GetNsysvars remove
GetNsysvars_w remove
SetNoSpeedNoAcceleration rename: ForceToRest
ChAssemblyAnalysis
get_L rename: GetLagrangeMultipliers
get_X rename: GetStatePos
get_V rename: GetStateVel
get_A rename: GetStateAcc
ChBasisToolsBspline rename: ChBasisToolsBSpline
ChBasisToolsBsplineSurfaces rename: ChBasisToolsBSplineSurfaces
ChBeamSectionCable
GetBeamRayleighDamping rename: GetRayleighDamping
GetI rename: GetInertia
SetBeamRayleighDamping rename: SetRayleighDamping
SetI rename: SetInertia
ChBeamSectionEuler
GetBeamRayleighDampingAlpha rename: GetRayleighDampingAlpha
GetBeamRayleighDampingBeta rename: GetRayleighDampingBeta
SetBeamRayleighDampingAlpha rename: SetRayleighDampingAlpha
SetBeamRayleighDampingBeta rename: SetRayleighDampingBeta
ChBeamSectionEulerAdvancedGeneric
SetXtorsionRigidity rename: SetTorsionRigidityX
SetYbendingRigidity rename: SetBendingRigidityY
SetZbendingRigidity rename: SetBendingRigidityZ
ChBeamSectionEulerSimple
GetGshearModulus rename: GetShearModulus
GetXtorsionRigidity rename: GetTorsionRigidityX
GetYbendingRigidity rename: GetBendingRigidityY
GetZbendingRigidity rename: GetBendingRigidityZ
SetGshearModulus rename: SetShearModulus
SetGwithPoissonRatio rename: SetShearModulusFromPoisson
ChBeamSectionShape
GetNofLines rename: GetNumLines
GetNofPoints rename: GetNumPoints
ChBeamSectionTimoshenkoAdvancedGeneric
GetYshearRigidity rename: GetShearRigidityY
GetZshearRigidity rename: GetShearRigidityZ
SetYshearRigidity rename: SetShearRigidityY
SetZshearRigidity rename: SetShearRigidityZ
ChBezierCurve
calcClosestPoint rename: CalcClosestPoint
eval rename: Eval
evalD rename: EvalDer
evalDD rename: EvalDer2
getNumPoints rename: GetNumPoints
getNumSegments rename: GetNumSegments
getPoint rename: GetPoint
getPoints rename: GetPoints
read rename: Read
reset rename: Reset
write rename: Write
ChBinaryArchive remove
ChBody
Accumulate_force rename: AccumulateForce
Accumulate_torque rename: AccumulateTorque
Dir_Body2World remove
Dir_World2Body remove
Empty_forces_accumulators rename: EmptyAccumulators
Get_accumulated_force rename: GetAccumulatedForce
Get_accumulated_torque rename: GetAccumulatedTorque
GetBodyFixed rename: IsFixed
GetCollide rename: IsCollisionEnabled
GetFrame_COG_to_abs rename: GetFrameCOMToAbs
GetGid remove
GetId rename: GetIndex (internal use only)
GetMaxSpeed rename: GetMaxLinVel
GetMaxWvel rename: GetMaxAngVel
GetSleeping rename: IsSleeping
GetSleepMinSpeed rename: GetSleepMinLinVel
GetSleepMinWvel rename: GetSleepMinAngVel
GetUseSleeping rename: IsSleepingAllowed
Point_Body2World remove
Point_World2Body remove
RelPoint_AbsAcc remove
RelPoint_AbsSpeed remove
SetBodyFixed rename: SetFixed
SetCollide rename: EnableCollision
SetGid remove
SetId remove
SetMaxSpeed rename: SetMaxLinVel
SetMaxWvel rename: SetMaxAngVel
SetNoGyroTorque rename: SetUseGyroTorque
SetNoSpeedNoAcceleration rename: ForceToRest
SetSleepMinSpeed rename: SetSleepMinLinVel
SetSleepMinWvel rename: SetSleepMinAngVel
SetUseSleeping rename: SetSleepingAllowed
ChBodyAuxRef
GetFrame_COG_to_REF rename: GetFrameCOMToRef
GetFrame_REF_to_abs rename: GetFrameRefToAbs
GetFrame_REF_to_COG rename: GetFrameRefToCOM
SetFrame_COG_to_REF rename: SetFrameCOMToRef
SetFrame_REF_to_abs rename: SetFrameRefToAbs
SetFrame_REF_to_COG rename: SetFrameRefToCOM
ChBodyFrame
To_abs_forcetorque remove
added: AppliedForceLocalToWrenchParent
added: AppliedForceParentToWrenchParent
ChButterworth_Highpass rename: ChButterworthHighpass
ChButterworth_Lowpass rename: ChButterworthLowpass
ChCollisionModel
GetFamilyMaskDoesCollisionWithFamily rename: CollidesWith
GetShape rename: GetShapeInstance
GetShapes rename: GetShapeInstances
SetFamilyMaskDoCollisionWithFamily rename: AllowCollisionsWith
SetFamilyMaskNoCollisionWithFamily rename: DisallowCollisionsWith
ChConstraint
Build_Cq rename: PasteJacobianInto
Build_CqT rename: PasteJacobianTransposedInto
Compute_c_i rename: ComputeResidual
Compute_Cq_q rename: ComputeJacobianTimesState
Get_b_i rename: GetRightHandSide
Get_c_i rename: GetResidual
Get_cfm_i rename: GetComplianceTerm
Get_g_i rename: GetSchurComplement
Get_l_i rename: GetLagrangeMultiplier
Set_b_i rename: SetRightHandSide
Set_c_i rename: SetResidual
Set_cfm_i rename: SetComplianceTerm
Set_g_i rename: SetSchurComplement
Set_l_i rename: SetLagrangeMultiplier
Increment_q rename: IncrementState
MultiplyAndAdd rename: AddJacobianTimesVectorInto
MultiplyTandAdd rename: AddJacobianTransposedTimesScalarInto
ChContactable
ContactableGet_ndof_x rename: GetContactableNumCoordsPosLevel
ContactableGet_ndof_w rename: GetContactableNumCoordsVelLevel
ContactableGetStateBlock_x rename: ContactableGetStateBlockPosLevel
ContactableGetStateBlock_w rename: ContactableGetStateBlockVelLevel
GetCsysForCollisionModel rename: GetCollisionModelFrame
ChContactNodeXYZROT rename: ChContactNodeXYZRot
ChContactNodeXYZROTsphere rename: ChContactNodeXYZRotSphere
ChContactSurfaceMesh
GetTriangleList rename: GetTrianglesXYZ
GetTriangleListRot rename: GetTrianglesXYZROT
ChContactSurfaceNodeCloud
GetNnodesRot rename: GetNumNodesRot
GetNodeList rename: GetNodes
GetNodeListRot rename: GetNodesRot
ChContactTriangleXYZROT rename: ChContactTriangleXYZRot
GetTrianglesXYZROT rename: GetTrianglesXYZRot
ChContinuumElastic
Get_BulkModulus rename: GetBulkModulus
Get_density rename: GetDensity
Get_E rename: GetYoungModulus
Get_G rename: GetShearModulus
Get_l rename: GetLameFirstParam
Get_StressStrainMatrix rename: GetStressStrainMatrix
Get_RayleighDampingK rename: GetRayleighDampingBeta
Get_RayleighDampingM rename: GetRayleighDampingAlpha
Get_WaveModulus rename: GetPWaveModulus
Get_v rename: GetPoissonRatio
Set_density rename: SetDensity
Set_E rename: SetYoungModulus
Set_G rename: SetShearModulus
Set_RayleighDampingK rename: SetRayleighDampingBeta
Set_RayleighDampingM rename: SetRayleighDampingAlpha
Set_v rename: SetPoissonRatio
ChContinuumDruckerPrager
Get_alpha rename: GetInternalFriction
Get_dilatancy rename: GetDilatancy
Get_hardening_limit rename: GetHardeningLimit
Get_hardening_speed rename: GetHardeningSpeed
Set_alpha rename: SetInternalFriction
Set_dilatancy rename: SetDilatancy
Set_from_MohrCoulomb rename: SetFromMohrCoulomb
Set_hardening_limit rename: SetHardeningLimit
Set_hardening_speed rename: SetHardeningSpeed
ChContinuumElastoplastic
ComputeYeldFunction rename: ComputeYieldFunction
Get_flow_rate rename: GetPlasticFlowRate
Set_flow_rate rename: SetPlasticFlowRate
ChContinuumElectrostatics
Get_PermittivityEmatrix rename: GetPermittivityMatrix
ChContinuumMaterial
Get_density rename: GetDensity
Set_density rename: SetDensity
ChContinuumPlasticVonMises
Get_elastic_yeld rename: GetElasticYield
Get_plastic_yeld rename: GetPlasticYield
Set_elastic_yeld rename: SetElasticYield
Set_plastic_yeld rename: SetPlasticYield
ChContinuumPoisson3D
Get_ConstitutiveMatrix rename: GetConstitutiveMatrix
ChContinuumThermal
GetThermalConductivityK rename: GetThermalConductivity
GetMassSpecificHeatCapacity rename: GetSpecificHeatCapacity
Get_ThermalKmatrix rename: GetConductivityMatrix
SetThermalConductivityK rename: SetThermalConductivity
SetMassSpecificHeatCapacity rename: SetSpecificHeatCapacity
ChControllerPID
Get_Out rename: GetOutput
Get_Pcomp remove
Get_Icomp remove
Get_Dcomp remove
Get_In_int remove
Get_In_dt remove
Get_In remove
ChElasticityCosseratAdvancedGenericFPM
GetEMatrix rename: GetStiffnessMatrix
SetEMatrix rename: SetStiffnessMatrix
UpdateEMatrix rename: UpdateStiffnessMatrix
ChElasticityKirchhoffIsothropic
Get_nu rename: GetPoissonRatio
ChElasticityKirchhoffOrthotropic
Get_E_x rename: GetYoungModulusX
Get_E_y rename: GetYoungModulusY
Get_G_xy rename: GetShearModulusXY
Get_nu_xy rename: GetPoissonRatioXY
Get_nu_yx rename: GetPoissonRatioYX
ChElasticityReissnerIsothropic
Get_alpha rename: GetShearFactor
Get_beta rename: GetTorqueFactor
ChElasticityReissnerOrthotropic
Get_G_xz rename: GetShearModulusXZ
Get_G_yz rename: GetShearModulusYZ
ChElementBar
GetBarArea rename: GetArea
GetBarDensity rename: GetDensity
GetBarRayleighDamping rename: GetRayleighDamping
GetBarYoungModulus rename: GetYoungModulus
SetBarArea rename: SetArea
SetBarDensity rename: SetDensity
SetBarRayleighDamping rename: SetRayleighDamping
SetBarYoungModulus rename: SetYoungModulus
ChElementBase
GetNdofs rename: GetNumCoordsPosLevel
GetNdofs_active rename: GetNumCoordsPosLevelActive
GetNodeN rename: GetNode
GetNodeNdofs rename: GetNodeNumCoordsPosLevel
GetNodeNdofs_active rename: GetNodeNumCoordsPosLevelActive
GetNnodes rename: GetNumNodes
InjectKRMmatrices rename: InjectKRMMatrices
KRMmatricesLoad rename: LoadKRMMatrices
ChElementBeamEuler
GetField_dt rename: GetFieldDt
GetField_dtdt rename: GetFieldDt2
ChElementShellANCF
Get_rho rename: GetDensity
ChElementShellBST
Get_theta rename: GetFiberAngle
Get_thickness rename: GetThickness
GetNodeNeighbourN rename: GetNodeNeighbour
GetNodeTriangleN rename: GetNodeMainTriangle
ChElementSpring
GetDamperR rename: GetDampingCoefficient
GetSpringK rename: GetSpringCoefficient
SetDamperR rename: SetDampingCoefficient
SetSpringK rename: SetSpringCoefficient
ChException remove
ChFrame
GetA rename: GetRotMat
GetCoord rename: GetCoordsys
operator%= remove
SetCoord rename: SetCoordsys
TransformLocalToParent see Notes
TransformParentToLocal see Notes
ChFrameMoving
Compute_Adt rename: ComputeRotMatDt
Compute_Adtdt rename: ComputeRotMatDt2
GetA_dt rename: GetRotMatDt
GetA_dtdt rename: GetRotMatDt2
GetCoord_dt rename: GetCoordsysDt
GetCoord_dtdt rename: GetCoordsysDt2
GetPos_dt rename: GetPosDt
added: GetLinVel
GetPos_dtdt rename: GetPosDt2
added: GetLinAcc
GetRot_dt rename: GetRotDt
GetRot_dtdt rename: GetRotDt2
GetWacc_loc rename: GetAngAccLocal
GetWacc_par rename: GetAngAccParent
GetWvel_loc rename: GetAngVelLocal
GetWvel_par rename: GetAngVelParent
operator%= remove
SetCoord_dt rename: SetCoordsysDt
SetCoord_dtdt rename: SetCoordsysDt2
SetPos_dt rename: SetPosDt
added: SetLinVel
SetPos_dtdt rename: SetPosDt2
added: SetLinAcc
SetRot_dt rename: SetRotDt
SetRot_dtdt rename: SetRotDt2
SetWacc_loc rename: SetAngAccLocal
SetWacc_par rename: SetAngAccParent
SetWvel_loc rename: SetAngVelLocal
SetWvel_par rename: SetAngVelParent
ChFunction
Compute_int rename: GetIntegral
Compute_max rename: GetMax
Compute_mean rename: GetMean
Compute_min rename: GetMin
Compute_sqrmean rename: GetSquaredMean
Estimate_x_range remove
Estimate_y_range remove: use GetMin, GetMax
EvaluateIntervaldN rename: SampleUpToDerN
Get_Ca_neg rename: GetNegativeAccelerationCoeff
Get_Ca_pos rename: GetPositiveAccelerationCoeff
Get_Cv rename: GetVelocityCoeff
Get_Type rename: GetType
Get_weight rename: GetWeight
Get_y rename: GetVal
Get_y_dN rename: GetDerN
Get_y_dx rename: GetDer
Get_y_dxdx rename: GetDer2
Get_y_dxdxdx rename: GetDer3
FileAsciiPairsSave rename: OutputToASCIIFile
HandleAccess remove
HandleNumber remove
FilePostscriptPlot remove
ChFunction_Const rename: ChFunctionConst
Get_yconst rename: GetConstant
Set_yconst rename: SetConstant
ChFunction_BSpline rename: ChFunctionBSpline
Get_Basis_Tool rename: GetBasisTool
Get_Control_Points rename: GetControlPoints
Get_Control_Points_Abscissae rename: GetControlPointsAbscissae
Get_Knots rename: GetKnots
Get_Order rename: GetOrder
Recompute_Constrained rename: ApplyInterpolationConstraints
Setup_Data rename: Setup
ChFunction_ConstAcc rename: ChFunctionConstAcc
Get_end rename: GetDuration
Get_h rename: GetDisplacement
Get_av rename: GetFirstAccelerationEnd
Get_aw rename: GetSecondAccelerationStart
Set_av rename: SetFirstAccelerationEnd
Set_avw rename: SetAccelerationReferencePoints
Set_aw rename: SetSecondAccelerationStart
Set_end rename: SetDuration
Set_h rename: SetDisplacement
ChFunction_Derive rename: ChFunctionDerivative
Get_order rename: GetOrder
Set_fa rename: SetOperandFunction
Get_fa rename: GetOperandFunction
Set_order rename: SetOrder
ChFunction_DoubleS rename: ChFunctionConstJerk
Get_Bounds rename: GetBoundaryConditions
Get_Constraints rename: GetImposedLimits
Get_Limits rename: GetReachedLimits
Get_Times rename: GetTimes
ChFunction_Cycloidal rename: ChFunctionCycloidal
Set_end rename: SetWidth
Set_h rename: SetHeight
Get_end rename: GetWidth
Get_h rename: GetHeight
ChFunction_Fillet3 rename: ChFunctionFillet3
Get_dy1 rename: GetStartDer
Get_dy2 rename: GetEndDer
Get_y1 rename: GetStartVal
Get_y2 rename: GetEndVal
Set_dy1 rename: SetStartDer
Set_dy2 rename: SetEndDer
Set_y1 rename: SetStartVal
Set_y2 rename: SetEndVal
SetupCoefficients rename: Setup
ChFunction_Integrate rename: ChFunctionIntegral
ComputeIntegral rename: Setup
Get_C_start rename: GetOffsetVal
Get_num_samples rename: GetNumSamples
Get_x_end rename: GetStart
Get_x_start rename: GetEnd
Set_C_start rename: SetOffsetVal
Set_num_samples rename: SetNumSamples
Set_x_end rename: SetEndArg
Set_x_start rename: SetStartArg
ChFunction_Lambda rename: ChFunctionLambda
ChFunction_Mirror rename: ChFunctionMirror
Get_mirror_axis rename: GetMirrorAxis
Set_mirror_axis rename: SetMirrorAxis
ChFunction_Mocap remove
ChFunction_Noise remove
ChFunction_Operation rename: ChFunctionOperator
Get_fa rename: GetFirstOperandFunction
Get_fb rename: GetSecondOperandFunction
Get_optype rename: GetOperationType
Set_fa rename: SetFirstOperandFunction
Set_fb rename: SetSecondOperandFunction
Set_optype rename: SetOperationType
ChFunction_Oscilloscope remove
ChFunction_Poly rename: ChFunctionPoly
Get_coeff rename: GetCoefficients
Set_coeff rename: SetCoefficients
ChFunction_Poly345 rename: ChFunctionPoly345
Set_end rename: SetWidth
Set_h rename: SetHeight
Get_end rename: GetWidth
Get_h rename: GetHeight
ChFunction_Ramp rename: ChFunctionRamp
Set_ang rename: SetAngularCoeff
Set_y0 rename: SetStartVal
Get_ang rename: GetAngularCoeff
Get_y0 rename: GetStartVal
ChFunction_Recorder rename: ChFunctionInterp
GetPoints rename: GetTable
ChFunction_Repeat rename: ChFunctionRepeat
Get_window_length rename: GetSliceLength
Get_window_phase rename: GetSliceShift
Get_window_start rename: GetSliceStart
Set_window_length rename: SetSliceWidth
Set_window_phase rename: SetSliceShift
Set_window_start rename: SetSliceStart
ChFunction_Sequence rename: ChFunctionSequence
Get_list rename: GetFunctions
GetNthDuration rename: GetDuration
GetNthFunction rename: GetFunction
GetNthNode rename: GetNode
KillFunct rename: RemoveFunct
ChFunction_Sigma rename: ChFunctionPoly23
Get_amp rename: GetAmplitude
Set_amp rename: SetAmplitude
ChFunction_Sine rename: ChFunctionSine
(constructor) changed args order to ampl, freq, phase
Get_phase rename: GetPhase
Set_phase rename: SetPhase
SetFreq rename: SetFrequency
Get_w rename: GetAngularRate
Set_freq rename: SetFrequency
Set_w rename: SetAngularRate
ChFunction_SineStep SetP1 rename: SetFirstPoint
SetP2 rename: SetSecondPoint
ChFunction_Setpoint rename: ChFunctionSetpoint
ChFunctionPosition
Get_p rename: GetPos
Get_p_ds rename: GetLinVel
Get_p_dsds rename: GetLinAcc
ChFunctionPosition
Get_q rename: GetQuat
Get_w_loc rename: GetAngVel
Get_a_loc rename: GetAngAcc
ChFunctionPosition_line rename: ChFunctionPositionLine
ChFunctionPosition_setpoint rename: ChFunctionPositionSetpoint
ChFunctionPosition_XYZfunctions rename: ChFunctionPositionXYZFunctions
ChFunctionRotation_ABCfunctions rename: ChFunctionRotationABCFunctions
SetAngleset rename: SetRotationRepresentation
GetAngleset rename: GetRotationRepresentation
ChFunctionRotation_axis rename: ChFunctionRotationAxis
ChFunctionRotation_setpoint rename: ChFunctionRotationSetpoint
ChFunctionRotation_spline rename: ChFunctionRotationBSpline
ChFunctionRotation_SQUAD rename: ChFunctionRotationSQUAD
ChImplicitTimestepper
GetMaxiters rename: GetMaxIters
SetMaxiters rename: SetMaxIters
ChIndexedParticles
GetNparticles rename: GetNumParticles
GetParticle rename: Particle
ChIntegrable
GetNconstr rename: GetNumConstraints
GetNcoords_dy remove: split in GetNumCoordsVelLevel/Acc
GetNcoords_x rename: GetNumCoordsPosLevel
GetNcoords_v rename: GetNumCoordsVelLevel
GetNcoords_y remove: split in GetNumCoordsPosLevel/Vel
ChIntegrable1D rename: ChIntegrand1D
ChIntegrable2D rename: ChIntegrand2D
ChIntegrable3D rename: ChIntegrand3D
ChIterativeSolver
SaveMatrix rename: WriteMatrices
ChKblock remove
ChKblockGeneric rename: ChKRMBlock
Build_K rename: PasteMatrixInto (see Notes)
Get_K rename: GetMatrix
GetVariableN rename: GetVariable
MultiplyAndAdd rename: AddMatrixTimesVectorInto
ChLine
Get_closed rename: IsClosed
Get_complexity rename: GetComplexity
Set_closed rename: SetClosed
Set_complexity rename: SetComplexity
ChLineBspline rename: ChLineBSpline
ChLineCam
Get_b0 rename: GetFollowerInitPhase
Get_center rename: GetCenter
Get_d rename: GetFollowerDistance
Get_e remove
Get_internal rename: IsInternal
Get_motion_law rename: GetMotionLaw
Get_negative rename: IsNegative
Get_Phase rename: GetPhase
Get_Rb rename: GetCamRadius
Get_Rr rename: GetWheelRadius
Get_s remove
Get_type rename: GetCamType
Set_center rename: SetCenter
Set_flat_oscillate rename: SetFlatOscillate
Set_internal rename: SetInternal
Set_motion_law rename: SetMotionLaw
Set_negative rename: SetNegative
Set_Phase rename: SetPhase
Set_Rb rename: SetCamRadius
Set_Rr rename: SetWheelRadius
Set_rotating_follower rename: SetRotatingFollower
Set_sliding_eccentrical rename: SetSlidingEccentrical
Set_type rename: SetCamType
ChLinePoly
Get_degree rename: GetDegree
Get_numpoints rename: GetNumPoints
Set_point rename: SetPoint
ChLink
GetLeftDOF remove
GetLinkRelativeCoords remove (see Notes)
add: GetFrame1Rel
add: GetFrame2Rel
ResetRedundant remove
ChLinkBase
GetLinkAbsoluteCoords remove
add: ChFrameAbs1
add: ChFrameAbs2
GetNumCoords rename: GetNumAffectedCoords
Get_react_force remove
Get_react_torque remove
add: GetReaction1 (see Notes)
add: GetReaction2 (see Notes)
ChLinkBeamIGAslider rename: ChLinkBeamIGAFrame
ChLinkBrake rename: ChLinkLockBrake
ChLinkClearance rename: ChLinkLockClearance
ChLinkDirFrame rename: ChLinkNodeSlopeFrame
ChLinkForce
GetF rename: GetActuatorForceTorque
GetFcurrent rename: GetCurrentActuatorForceTorque
GetForce rename: GetForceTorque
GetK rename: GetSpringCoefficient
GetKcurrent rename: GetCurrentSpringCoefficient
GetModulationActuator rename: GetActuatorModulation
GetModulationK rename: GetSpringModulation
GetModulationR rename: GetDamperModulation
GetR rename: GetDampingCoefficient
GetRcurrent rename: GetCurrentDampingCoefficient
SetF rename: SetActuatorForceTorque
SetModulationF rename: SetActuatorModulation
SetModulationK rename: SetSpringModulation
SetModulationR rename: SetDamperModulation
ChLinkGear rename: ChLinkLockGear
ChLinkLimit
GetKmax rename: GetSpringCoefficientMax
GetKmin rename: GetSpringCoefficientMin
GetMaxPolarAngle rename: GetPolarAngleMax
GetModulationKmax rename: GetSpringModulationMax
GetModulationKmin rename: GetSpringModulationMin
GetModulationRmax rename: GetDamperModulationMax
GetModulationRmin rename: GetDamperModulationMin
GetPolarMax rename: GetPolarAngleModulationMax
GetRmax rename: GetDampingCoefficientMax
GetRmin rename: GetDampingCoefficientMin
SetKmax rename: SetSpringCoefficientMax
SetKmin rename: SetSpringCoefficientMin
SetModulationKmax rename: SetSpringModulationMax
SetModulationKmin rename: SetSpringModulationMin
SetModulationRmax rename: SetDamperModulationMax
SetModulationRmin rename: SetDamperModulationMin
SetPolarMax rename: SetPolarAngleModulationMax
SetRmax rename: SetDampingCoefficientMax
SetRmin rename: SetDampingCoefficientMin
ChLinkLinActuator rename: ChLinkLockLinActuator
ChLinkLock
ChangeLinkType rename: ChangeType
GetConstraintViolation_dt rename: GetConstraintViolationDt
GetConstraintViolation_dtdt rename: GetConstraintViolationDt2
GetForce_D rename: ForceD
GetForce_R rename: ForceRp
GetForce_Rx rename: ForceRx
GetForce_Ry rename: ForceRy
GetForce_Rz rename: ForceRz
GetForce_X rename: ForceX
GetForce_Y rename: ForceY
GetForce_Z rename: ForceZ
GetLimit_D rename: LimitD
GetLimit_Rp rename: LimitRp
GetLimit_Rx rename: LimitRx
GetLimit_Ry rename: LimitRy
GetLimit_Rz rename: LimitRz
GetLimit_X rename: LimitX
GetLimit_Y rename: LimitY
GetLimit_Z rename: LimitZ
GetRelM rename: GetRelCoordsys
GetRelM_dt rename: GetRelCoordsysDt
GetRelM_dtdt rename: GetRelCoordsysDt2
SetUpMarkers rename: SetupMarkers
ChLinkLockBrake
Get_brake_mode rename: GetBrakeMode
Get_brake_torque rename: GetBrakeTorque
Get_stick_ratio rename: GetStickingCoeff
Set_brake_mode rename: SetBrakeMode
Set_brake_torque rename: SetBrakeTorque
Set_stick_ratio rename: SetStickingCoeff
ChLinkLockClearance
Get_axis_eccentricity rename: GetEccentricity
Get_axis_phase rename: GetAxisAngularLocation
Get_c_friction rename: GetFriction
Get_c_restitution rename: GetRestitution
Get_c_tang_restitution remove
Get_c_viscous remove
Get_clearance rename: GetClearance
Get_contact_F_abs rename: GetContactForceAbs
Get_contact_F_n rename: GetContactForceNormal
Get_contact_F_t rename: GetContactForceTangential
Get_contact_N_abs rename: GetContactNormalAbs
Get_contact_P_abs rename: GetContactPosAbs
Get_contact_V_t rename: GetContactSpeedTangential
Get_diameter rename: GetDiameter
Get_is_in_contact remove
Get_rotation_angle rename: GetRotationAngle
GetC_force rename: GetAccumulatedForce
GetC_torque rename: GetAccumulatedTorque
GetRelRotaxis rename: GetRelAngleAxis
Set_c_friction rename: SetFriction
Set_c_restitution rename: SetRestitution
Set_c_tang_restitution remove
Set_c_viscous remove
Set_clearance rename: SetClearance
Set_diameter rename: SetDiameter
ChLinkLockLock
GetMotion_ang rename: GetMotionAng1
GetMotion_ang2 rename: GetMotionAng2
GetMotion_ang3 rename: GetMotionAng3
GetMotion_axis rename: GetMotionAxis
GetMotion_X rename: GetMotionX
GetMotion_Y rename: GetMotionY
GetMotion_Z rename: GetMotionZ
GetRelC rename: GetRelCoordsysViolation
GetRelC_dt rename: GetRelCoordsysViolationDt
GetRelC_dtdt rename: GetRelCoordsysViolationDt2
SetMotion_ang rename: SetMotionAng1
SetMotion_ang2 rename: SetMotionAng2
SetMotion_ang3 rename: SetMotionAng3
SetMotion_axis rename: SetMotionAxis
SetMotion_X rename: SetMotionX
SetMotion_Y rename: SetMotionY
SetMotion_Z rename: SetMotionZ
ChLinkLockGear
Get_a1 rename: GetRotation1
Get_a2 rename: GetRotation2
Get_alpha rename: GetPressureAngle
Get_beta rename: GetPitchAngle
Get_checkphase rename: GetEnforcePhase
Get_epicyclic rename: GetEpicyclic
Get_local_shaft1 rename: GetFrameShaft1
Get_local_shaft2 rename: GetFrameShaft2
Get_phase rename: GetPhase
Get_r1 rename: GetRadius1
Get_r2 rename: GetRadius2
Get_shaft_dir1 rename: GetDirShaft1
Get_shaft_dir2 rename: GetDirShaft2
Get_shaft_pos1 rename: GetPosShaft1
Get_shaft_pos2 rename: GetPosShaft2
Get_tau rename: GetTransmissionRatio
Reset_a1a2 rename: ResetRotations
Set_alpha rename: SetPressureAngle
Set_beta rename: SetPitchAngle
Set_checkphase rename: SetEnforcePhase
Set_local_shaft1 rename: SetFrameShaft1
Set_local_shaft2 rename: SetFrameShaft2
Set_epicyclic rename: SetEpicyclic
Set_tau rename: SetTransmissionRatio
ChLinkLockPointSpline
Get_trajectory_line rename: GetTrajectory
Set_trajectory_line rename: SetTrajectory
ChLinkLockPulley
Get_belt_up1 rename: GetBeltUpPos1
Get_belt_up2 rename: GetBeltUpPos2
Get_belt_low1 rename: GetBeltBottomPos1
Get_belt_low2 rename: GetBeltBottomPos2
Set_r1 rename: SetRadius1
Set_r2 rename: SetRadius2
ChLinkLockScrew
Get_thread rename: GetThread
Set_thread rename: SetThread
ChLinkLockTrajectory
Get_space_fx rename: GetTimeLaw
Set_space_fx rename: SetTimeLaw
Set_modulo_one_fx rename: WrapTimeLaw
ChLinkMask
Constr_N rename: GetConstraint
GetActiveConstrByNum rename: GetActiveConstraint
GetMaskDoc rename: GetNumConstraintsActive
GetMaskDoc_c rename: GetNumConstraintsBilateralActive
GetMaskDoc_d rename: GetNumConstraintsUnilateralActive
nconstr rename: GetNumConstraints
ResetNconstr rename: SetNumConstraints
ResetRedundant remove
SetActiveRedundantByArray remove
ChLinkMarkers
GetDist rename: GetDistance
GetDist_dt rename: GetDistanceDt
GetRelWvel rename: GetRelativeAngVel
GetRelWacc rename: GetRelativeAngAcc
ChLinkMate
RestoreRedundant rename: ResetRedundant
ChLinkMateCoaxial rename: ChLinkMateCylindrical
ChLinkMateGeneric
GetSeparation rename: GetDistance
ChLinkMatePlane rename: ChLinkMatePlanar
GetLagrangeMultiplier_f remove
GetLagrangeMultiplier_m remove
ChLinkMatePrismatic
GetRelativePos_dt rename: GetRelativePosDt
GetRelativePos_dtdt rename: GetRelativePosDt2
ChLinkMateRevolute
GetRelativeAngle_dt rename: GetRelativeAngleDt
GetRelativeAngle_dtdt rename: GetRelativeAngleDt2
ChLinkMateXdistance rename: ChLinkMateDistanceZ
ChLinkMotorLinearDriveline
GetInnerShaft1lin rename: GetInnerShaft1Lin
GetInnerShaft2lin rename: GetInnerShaft2Lin
GetInnerShaft2rot rename: GetInnerShaft2Rot
ChLinkMotorPosition
GetMotorPos_dt rename: GetMotorPosDt
GetMotorPos_dtdt rename: GetMotorPosDt2
ChLinkMotorRotation
GetMotorRot rename: GetMotorAngle
GetMotorRot_dt rename: GetMotorAngleDt
GetMotorRot_dtdt rename: GetMotorAngleDt2
GetMotorRotPeriodic rename: GetMotorAngleWrapped
GetMotorRotTurns rename: GetMotorNumTurns
ChLinkMotorRotationSpeed
GetAvoidAngleDrift remove
SetAvoidAngleDrift rename: AvoidAngleDrift
ChLinkPointFrame rename: ChLinkNodeFrame
ChLinkPointPoint rename: ChLinkNodeNode
GetConstrainedNodeA rename: GetNode1
GetConstrainedNodeB rename: GetNode2
ChLinkPointTriface rename: ChLinkNodeFace
GetConstrainedNodeA rename: GetNode
GetConstrainedTriangle rename: GetTriangle
ChLinkPointTrifaceRot rename: ChLinkNodeFaceRot
GetConstrainedNodeA rename: GetNode
GetConstrainedTriangle rename: GetTriangle
ChLinkPointSpline rename: ChLinkLockPointSpline
ChLinkPulley rename: ChLinkLockPulley
ChLinkRackpinion rename: ChLinkMateRackPinion
GetAlpha rename: GetPressureAngle
GetBeta rename: GetPitchAngle
GetCheckphase rename: GetEnforcePhase
SetAlpha rename: SetPressureAngle
SetBeta rename: SetPitchAngle
SetCheckphase rename: SetEnforcePhase
Reset_a1 rename: ResetRotation1
ChLinkScrew rename: ChLinkLockScrew
ChLinkTrajectory rename: ChLinkLockTrajectory
ChList remove
ChLoad replaced with non-templated class (see Notes)
LoadGet_ndof_x rename: LoadGetNumCoordsPosLevel
LoadGet_ndof_w rename: LoadGetNumCoordsVelLevel
ChLoadable
Get_field_ncoords rename: GetNumFieldCoords
GetSubBlocks rename: GetNumSubBlocks
LoadableGet_ndof_x rename: GetLoadableNumCoordsPosLevel
LoadableGet_ndof_w rename: GetLoadableNumCoordsVelLevel
LoadableGetStateBlock_x rename: LoadableGetStateBlockPosLevel
LoadableGetStateBlock_w rename: LoadableGetStateBlockVelLevel
ChLoadBase
LoadGet_field_ncoords rename: LoadGetNumFieldCoords
ChLoadBodyBodyBushingPlastic
GetYeld rename: GetYield
SetYeld rename: SetYield
ChLoaderGravity
Get_G_acc rename: GetGravitationalAcceleration
Set_G_acc rename: SetGravitationalAcceleration
ChLoaderXYZnode rename: ChLoaderNodeXYZ
ChLoadXYZnode rename: ChLoadNodeXYZ
ChLoadXYZnodeBody rename: ChLoadNodeXYZBody
GetBodyB rename: GetBody
GetNodeA rename: GetNode
ChLoadXYZnodeBodyBushing rename: ChLoadNodeXYZBodyBushing
ChLoadXYZnodeBodySpring rename: ChLoadNodeXYZBodySpring
ChLoadXYZnodeForce rename: ChLoadNodeXYZForce
ChLoadXYZnodeForceAbsolute rename: ChLoadNodeXYZForceAbs
ChLoadXYZnodeXYZnode rename: ChLoadNodeXYZNodeXYZ
ChLoadXYZnodeXYZnodeBushing rename: ChLoadNodeXYZNodeXYZBushing
ChLoadXYZnodeXYZnodeSpring rename: ChLoadNodeXYZNodeXYZSpring
ChLoadXYZROTnodeBody rename: ChLoadNodeXYZRotBody
GetBodyB rename: GetBody
GetNodeA rename: GetNode
ChLoadXYZROTnodeBodyBushingGeneric rename: ChLoadNodeXYZRotBodyBushingGeneric
ChLoadXYZROTnodeBodyBushingMate rename: ChLoadNodeXYZRotBodyBushingMate
ChLoadXYZROTnodeBodyBushingPlastic rename: ChLoadNodeXYZRotBodyBushingPlastic
ChLoadXYZROTnodeBodyBushingSpherical rename: ChLoadNodeXYZRotBodyBushingSpherical
ChLoadXYZROTnode rename: ChLoadNodeXYZRot
ChLoadXYZROTnodeForceAbsolute rename: ChLoadNodeXYZRotForceAbs
ChLoadXYZROTnodeXYZROTnode rename: ChLoadNodeXYZRotNodeXYZRot
ChLoadXYZROTnodeXYZROTnodeBushingGeneric rename: ChLoadNodeXYZRotNodeXYZRotBushingGeneric
ChLoadXYZROTnodeXYZROTnodeBushingMate rename: ChLoadNodeXYZRotNodeXYZRotBushingMate
ChLoadXYZROTnodeXYZROTnodeBushingPlastic rename: ChLoadNodeXYZRotNodeXYZRotBushingPlastic
ChLoadXYZROTnodeXYZROTnodeBushingSpherical rename: ChLoadNodeXYZRotNodeXYZRotBushingSpherical
ChLog remove
ChLogConsole remove
ChMarker
Dir_Ref2World remove
Dir_World2Ref remove
GetAbsWvel rename: GetAngVelAbs
GetAbsWacc rename: GetAngAccAbs
GetAbsCoord rename: GetAbsCoordsys
GetAbsCoord_dt rename: GetAbsCoordsysDt
GetAbsCoord_dtdt rename: GetAbsCoordsysDt2
GetMotionAng1 rename: GetMotionAngle
GetMotion_axis rename: GetMotionAxis
GetMotionX rename: GetMotionX
GetMotionY rename: GetMotionY
GetMotionZ rename: GetMotionZ
GetRest_Coord rename: GetRestCoordsys
Impose_Rel_Coord rename: ImposeRelativeTransform
Impose_Abs_Coord rename: ImposeAbsoluteTransform
Point_Ref2World remove
Point_World2Ref remove
SetAbsCoord rename: SetAbsCoordsys
SetAbsCoord_dt rename: SetAbsCoordsysDt
SetAbsCoord_dtdt rename: SetAbsCoordsysDt2
SetMotion_ang rename: SetMotionAngle
SetMotion_axis rename: SetMotionAxis
SetMotion_X rename: SetMotionX
SetMotion_Y rename: SetMotionY
SetMotion_Z rename: SetMotionZ
ChMaterialSurface rename: ChContactMaterial
SetSfriction rename: SetStaticFriction
GetSfriction rename: GetStaticFriction
SetKfriction rename: SetSlidingFriction
GetKfriction rename: GetSlidingFriction
ChMaterialComposite rename: ChContactMaterialComposite
ChMaterialCompositeNSC rename: ChContactMaterialCompositeNSC
ChMaterialCompositeSMC rename: ChContactMaterialCompositeSMC
ChMaterialCompositionStrategy rename: ChContactMaterialCompositionStrategy
ChMatrix33
Get_A_Cardano rename: GetFromCardanAnglesZXY
Get_A_Eulero rename: GetFromEulerAnglesZXZ
Get_A_Hpb rename: GetFromCardanAnglesZYX
Get_A_quaternion rename: GetFromQuaternion
Get_A_Rodriguez rename: GetFromRodriguesParameters
Get_A_Rxyz rename: GetFromCardanAnglesXYZ
Get_A_Xaxis() rename: GetAxisX()
Get_A_Yaxis() rename: GetAxisY()
Get_A_Zaxis() rename: GetAxisZ()
GetAx() remove
Set_A_axis rename: SetFromDirectionAxes
Set_A_Cardano rename: SetFromCardanAnglesZXY
Set_A_Eulero rename: SetFromEulerAnglesZXZ
Set_A_Hpb rename: SetFromCardanAnglesZYX
Set_A_quaternion rename: SetFromQuaternion
Set_A_Rodriguez rename: SetFromRodriguesParameters
Set_A_Rxyz rename: SetFromCardanAnglesXYZ
Set_A_Xdir rename: SetFromAxisX
ChMesh
GetNcontactSurfaces rename: GetNumContactSurfaces
GetNelements rename: GetNumElements
GetNmeshSurfaces rename: GetNumMeshSurfaces
SetNoSpeedNoAcceleration rename: ForceToRest
ChMeshSurface
GetFacesList rename: GetFaces
ChMinMaxDistribution rename: ChUniformDistribution
ChModalAssembly
refer to ChAssembly like ChAssembly with boundary/internal suffixes
ComputeModalKRMmatrix rename: ComputeModalKRMmatricesGlobal
ComputeLocalFullKMCqMatrix rename: ComputeLocalFullKMCqMatrices
ComputeInertialKRMmatrix remove
ComputeStiffnessMatrix remove
ComputeDampingMatrix remove
DoModalReduction_CraigBamption remove
DoModalReduction_HERTING rename: ApplyModeAccelerationTransformation
DumpSubassemblyMatrices rename: WriteSubassemblyMatrices
Get_full_assembly_x_old rename: GetDeformedState
Get_modal_K rename: GetModalStiffnessMatrix
Get_modal_M rename: GetModalMassMatrix
Get_modal_Psi rename: GetModalReductionMatrix
Get_modal_q rename: GetModalCoordinatesPosLevel
Get_modal_q_dt rename: GetModalCoordinatesVelLevel
Get_modal_q_dtdt rename: GetModalCoordinatesAccLevel
Get_modal_R rename: GetModalDampingMatrix
Get_modes_assembly_x0 rename: GetInitialState
Get_modes_damping_ratios rename: GetDampingRatios
Get_modes_eig rename: GetEigenValues
Get_modes_frequencies rename: GetUndampedFrequencies
Get_modes_V rename: GetEigenVectors
SetNoSpeedNoAcceleration rename: ForceToRest
SwitchModalReductionON rename: DoModalReduction
SetFullStateWithModeOverlay rename: UpdateFullStateWithModeOverlay
SetInternalStateWithModes rename: UpdateInternalStateWithModes
ChMotionlawFilter rename: ChMotionFilter
ChMotionlawFilter_SecondOrder rename: ChMotionFilterSecondOrder
ChMotionlawFilter_ThirdOrder rename: ChMotionFilterThirdOrder
ChNodeBase
GetNdofX rename: GetNumCoordsPosLevel
GetNdofX_active rename: GetNumCoordsPosLevelActive
GetNdofW rename: GetNumCoordsVelLevel
GetNdofW_active rename: GetNumCoordsVelLevelActive
NodeGetOffsetX rename: NodeGetOffsetPosLevel
NodeGetOffsetW rename: NodeGetOffsetVelLevel
NodeSetOffset_x rename: NodeSetOffsetPosLevel
NodeSetOffset_w rename: NodeSetOffsetVelLevel
UseFullDof rename: IsAllCoordsActive
ChNodeFEAbase
SetNoSpeedNoAcceleration rename: ForceToRest
ChNodeFEAcurv
SetNoSpeedNoAcceleration rename: ForceToRest
ChNodeFEAxyz
SetNoSpeedNoAcceleration rename: ForceToRest
ChNodeFEAxyzD
GetD rename: GetSlope1
GetD_dt rename: GetSlope1Dt
GetD_dtdt rename: GetSlope1Dt2
IsFixedD rename: IsSlope1Fixed
SetD rename: SetSlope1
SetD_dt rename: SetSlope1Dt
SetD_dtdt rename: SetSlope1Dt2
SetFixedD rename: SetSlope1Fixed
SetNoSpeedNoAcceleration rename: ForceToRest
Variable_D rename: VariablesSlope1
ChNodeFEAxyzDD
GetDD rename: GetSlope2
GetDD_dt rename: GetSlope2Dt
GetDD_dtdt rename: GetSlope2Dt2
IsFixedDD rename: IsSlope2Fixed
SetDD rename: SetSlope2
SetDD_dt rename: SetSlope2Dt
SetDD_dtdt rename: SetSlope2Dt2
SetFixedDD rename: SetSlope2Fixed
SetNoSpeedNoAcceleration rename: ForceToRest
Variable_DD rename: VariablesSlope2
ChNodeFEAxyzDDD
GetDDD rename: GetSlope3
GetDDD_dt rename: GetSlope3Dt
GetDDD_dtdt rename: GetSlope3Dt2
IsFixedDDD rename: IsSlope3Fixed
SetDDD rename: SetSlope3
SetDDD_dt rename: SetSlope3Dt
SetDDD_dtdt rename: SetSlope3Dt2
SetFixedDDD rename: SetSlope3Fixed
SetNoSpeedNoAcceleration rename: ForceToRest
Variable_DDD rename: VariablesSlope3
ChNodeFEAxyzP
GetF rename: GetLoad
GetP rename: GetFieldVal
GetP_dt rename: GetFieldValDt
SetF rename: SetLoad
SetP rename: SetFieldVal
SetP_dt rename: SetFieldValDt
ChNodeFEAxyzrot
SetNoSpeedNoAcceleration rename: ForceToRest
ChObj
SetIdentifier remove (see Notes)
GetName remove
GetNameString rename: GetName
SetName remove
SetNameString rename: SetName
ChParticleCloud
SetNoSpeedNoAcceleration rename: ForceToRest
ChPhysicsItem
ConstraintsLoadJacobian rename: LoadConstraintJacobians
GetDOC rename: GetNumConstraints
GetDOC_c rename: GetNumConstraintsBilateral
GetDOC_d rename: GetNumConstraintsUnilateral
GetDOF rename: GetNumCoordsPosLevel
GetDOF_w rename: GetNumCoordsVelLevel
InjectKRMmatrices rename: InjectKRMMatrices
KRMmatricesLoad rename: LoadKRMMatrices
SetNoSpeedNoAcceleration rename: SetZeroVelocityZeroAcceleration
ChQuaternion
free functions rename and move to ChRotation.h (see Notes)
GetXaxis rename: GetAxisX
GetYaxis rename: GetAxisY
GetZaxis rename: GetAxisZ
ImmQ_complete remove
ImmQ_dt_complete remove
ImmQ_dtdtcomplete remove
operator% remove use operator*()
Q_from_AngAxis rename: SetFromAngleAxis
Q_from_AngX rename: SetFromAngleX
Q_from_AngY rename: SetFromAngleY
Q_from_AngZ rename: SetFromAngleZ
Q_from_Euler123 rename: SetFromCardanAnglesXYZ
Q_from_NasaAngles rename: SetFromCardanAnglesZYX
Q_from_Rotv rename: SetFromRotVec
Q_to_AngAxis rename: GetAngleAxis
Q_to_Euler123 rename: GetCardanAnglesXYZ
Q_to_NasaAngles rename: GetCardanAnglesZYX
Q_to_Rotv rename: GetRotVec
Qdt_from_AngAxis rename: SetDtFromAngleAxis
Qdt_from_Wabs rename: SetDtFromAngVelAbs
Qdt_to_Wabs rename: GetAngVelAbs
Qdt_to_Wrel rename: GetAngVelRel
Qdt_from_Wrel rename: SetDtFromAngVelRel
Qdtdt_from_Aabs rename: SetDt2FromAngAccAbs
Qdtdt_from_Arel rename: SetDt2FromAngAccRel
Qdtdt_from_AngAxis rename: SetDt2FromAngleAxis
ChShaft
GetAppliedTorque rename: GetAppliedLoad
GetId rename: GetIndex (internal use only)
GetGid remove
GetLimitSpeed remove
GetShaftFixed rename: IsFixed
GetSleeping rename: IsSleeping
GetSleepMinSpeed remove
GetSleepMinWvel remove
GetSleepTime remove
GetUseSleeping rename: IsSleepingAllowed
SetAppliedTorque rename: SetAppliedLoad
SetNoSpeedNoAcceleration rename: ForceToRest
SetSleepMinWvel remove
SetShaftFixed rename: SetFixed
SetUseSleeping rename: SetSleepingAllowed
ChShaftsBody rename: ChShaftBodyRotation
ChShaftsBodyTranslation rename: ChShaftBodyTranslation
ChShaftsClutch
GetSlippage_dt rename: GetSlippageDt
GetSlippage_dtdt rename: GetSlippageDt2
ChShaftsCouple
GetRelativeRotation rename: GetRelativePos
GetRelativeRotation_dt rename: GetRelativePosDt
GetRelativeRotation_dtdt rename: GetRelativePosDt2
GetTorqueReactionOn1 rename: GetReaction1
GetTorqueReactionOn2 rename: GetReaction2
ChShaftsElasticGear
GetGearRadiusA rename: GetGearRadius1
GetGearRadiusB rename: GetGearRadius2
ChShaftsGear
GetAvoidPhaseDrift remove
SetAvoidPhaseDrift rename: AvoidPhaseDrift
ChShaftsLoad
GetShaftA rename: GetShaft1
GetShaftB rename: GetShaft2
ChShaftsMotor remove
ChShaftsMotorBase rename: ChShaftsMotor
GetMotorRot rename: GetMotorPos
GetMotorRot_dt rename: GetMotorPosDt
GetMotorRot_dtdt rename: GetMotorPosDt2
GetMotorRotPeriodic rename: GetMotorAngleWrapped
GetMotorRotTurns rename: GetMotorNumTurns
GetMotorTorque rename: GetMotorLoad
GetTorqueReactionOn1 rename: GetReaction1
GetTorqueReactionOn2 rename: GetReaction2
ChShaftsMotorAngle rename: ChShaftsMotorPosition
GetAngleFunction rename: GetPositionFunction
GetAngleOffset rename: GetOffset
SetAngleFunction rename: SetPositionFunction
SetAngleOffset rename: SetOffset
ChShaftsMotorSpeed
GetAvoidAngleDrift remove
GetAngleOffset rename: GetOffset
SetAvoidAngleDrift rename: AvoidDrift
SetAngleOffset rename: SetOffset
ChShaftsMotorTorque rename: ChShaftsMotorLoad
GetTorqueFunction rename: GetLoadFunction
SetTorqueFunction rename: SetLoadFunction
ChShaftsPlanetary
GetAvoidPhaseDrift remove
SetAvoidPhaseDrift rename: AvoidPhaseDrift
ChShaftsTorque rename: ChShaftsAppliedTorque
ChShaftsTorqueBase rename: ChShaftsTorque
ChSolverBB
GetMaxArmijoBacktrace rename: GetMaxStepsArmijoBacktrace
GetNarmijo rename: GetMaxStepsArmijoLineSearch
SetMaxArmijoBacktrace rename: SetMaxStepsArmijoBacktrace
SetNarmijo rename: SetMaxStepsArmijoLineSearch
ChStaticAnalysis remove
GetL rename: GetLagrangeMultipliers
GetX rename: GetStatePos
ChStream remove
ChStreamFile remove
ChStreamIn remove
ChStreamInAscii remove
ChStreamInAsciiFile remove
ChStreamInBinary remove
ChStreamInBinaryFile remove
ChStreamOut remove
ChStreamOutAscii remove
ChStreamOutAsciiFile remove
ChStreamOutBinary remove
ChStreamOutBinaryFile remove
ChSurface
Get_closed_U rename: IsClosedU
Get_closed_V rename: IsClosedV
ChSystem
ConstraintsLoadJacobian rename: LoadConstraintJacobians
DoEntireDynamics remove
DoEntireKinematics remove
DoEntireUniformDynamics remove
DoFullAssembly remove use DoAssembly(AssemblyLevel::FULL)
DumpSystemMatrices rename: WriteSystemMatrices
Get_bodylist rename: GetBodies
Get_G_acc rename: GetGravitationalAcceleration
Get_linklist rename: GetLinks
Get_meshlist rename: GetMeshes
Get_otherphysicslist rename: GetOtherPhysicsItems
Get_shaftslist rename: GetShafts
GetDOC remove
GetDOC_c remove
GetDOC_d remove
GetDOF remove
GetDOF_w remove
GetMaxiter remove
GetMinBounceSpeed remove
GetNbodies rename: GetNumBodiesActive
GetNbodiesFixed rename: GetNumBodiesFixed
GetNbodiesSleeping rename: GetNumBodiesSleeping
GetNbodiesTotal rename: GetNumBodies
GetNconstr rename: GetNumConstraints
GetNcontacts rename: GetNumContacts
GetNcoords rename: GetNumCoordsPosLevel
GetNcoords_w rename: GetNumCoordsVelLevel
GetNdoc remove: no constraints at position level
GetNdoc_w rename: GetNumConstraints
GetNdoc_w_C rename: GetNumConstraintsBilateral
GetNdoc_w_D rename: GetNumConstraintsUnilateral
GetNdof remove: it was a rough estimate
GetNlinks rename: GetNumLinksActive
GetNmeshes rename: GetNumMeshes
GetNphysicsItems rename: GetNumOtherPhysicsItemsActive
GetNshafts rename: GetNumShafts
GetNshaftsFixed rename: GetNumShaftsFixed
GetNshaftsSleeping rename: GetNumShaftsSleeping
GetNshaftsTotal rename: GetNumShaftsTotal
GetNsysvars remove
GetNsysvars_w remove
GetSolverCallsCount rename: GetSolverSolveCount
GetSolverForceTolerance remove
GetSolverMaxIterations remove
GetSolverTolerance remove
GetStepcount rename: GetNumSteps
GetUseSleeping rename: IsSleepingAllowed
InjectKRMmatrices rename: InjectKRMMatrices
Integrate_Y rename: AdvanceDynamics
KRMmatricesLoad rename: LoadKRMMatrices
ResetStepcount rename: ResetNumSteps
Set_G_acc rename: SetGravitationalAcceleration
SetMaxiter remove
SetMinBounceSpeed remove and move to ChSystemNSC
SetSolverForceTolerance remove (see Notes)
SetSolverMaxIterations remove (see Notes)
SetSolverTolerance remove (see Notes)
SetStep remove
SetUseSleeping rename: SetSleepingAllowed
ChSystemSMC
GetStiffContact rename: IsContactStiff
SetStiffContact rename: SetContactStiff
ChSystemDescriptor
ConvertToMatrixForm rename: BuildSystemMatrix
GetConstraintsList rename: GetConstraints
GetKblocksList rename: GetKRMBlocks
GetVariablesList rename: GetVariables
InsertKblock rename: InsertKRMBlock
ChSystemFsi
Get_G_acc rename: GetGravitationalAcceleration
Set_G_acc rename: SetGravitationalAcceleration
ChSystemMulticore
GetNumBilaterals rename: GetNumConstraintsBilateral
Integrate_Y rename: AdvanceDynamics
ChTimestepper
get_L rename: GetLagrangeMultipliers
ChTimestepperIorder
get_Y rename: GetState
get_dYdt rename: GetStateDt
ChTimestepperIIorder
get_X rename: GetStatePos
get_V rename: GetStateVel
get_A rename: GetStateAcc
ChTriangleMesh
addTriangle rename: AddTriangle
getNumTriangles rename: GetNumTriangles
getTriangle rename: GetTriangle
ChTimer see Notes
GetTimeMicrosecondsIntermediate remove
GetTimeMillisecondsIntermediate remove
GetTimeSecondsIntermediate remove
ChTriangleMeshConnected
addTriangle rename: AddTriangle
getCoordsVertices rename: GetCoordsVertices
getCoordsNormals rename: GetCoordsNormals
getCoordsUV rename: GetCoordsUV
getCoordsColors rename: GetCoordsColors
getIndicesVertexes rename: GetIndicesVertexes
getIndicesNormals rename: GetIndicesNormals
getIndicesUV rename: GetIndicesUV
getIndicesColors rename: GetIndicesColors
getIndicesMaterials rename: GetIndicesMaterials
getNumNormals rename: GetNumNormals
getNumTriangles rename: GetNumTriangles
getNumVertices rename: GetNumVertices
getPropertiesPerVertex rename: GetPropertiesPerVertex
getPropertiesPerFace rename: GetPropertiesPerFace
getTriangle rename: GetTriangle
ChTriangleMeshSoup
addTriangle rename: AddTriangle
getNumTriangles rename: GetNumTriangles
getTriangle rename: GetTriangle
ChTriangleOfXYZnodes rename: ChTriangleNodesXYZ
ChTriangleOfXYZROTnodes rename: ChTriangleNodesXYZrot
ChVariables
Build_M rename: PasteMassInto (see Notes)
Compute_fb remove
Compute_invMb_v rename: ComputeMassInverseTimesVector
Compute_inc_invMb_v remove
Compute_inc_Mb_v rename: AddMassTimesVector
DiagonalAdd rename: AddMassDiagonalInto
Get_ndof rename: GetDOF
Get_qb rename: State
Get_fb rename: Force
MultiplyAndAdd rename: AddMassTimesVectorInto
ChVector rename: ChVector3
DirToDxDyDz rename: GetDirectionAxesAsX
ChVisualModel
GetShapes rename: GetShapeInstances
ChVolume
Get_closed_U rename: IsClosedU
Get_closed_V rename: IsClosedV
Get_closed_W rename: IsClosedW
CSV_writer rename: ChWriterCSV
delim rename: GetDelimiter
set_delim rename: SetDelimiter
stream rename: Stream
write_to_file rename: WriteToFile
Generator rename: ChGenerator
getBodyIdentifier rename: GetBodyIdentifier
getTotalMass rename: GetTotalMass
getTotalNumBodies rename: GetTotalNumBodies
getTotalVolume rename: GetTotalVolume
setBodyIdentifier rename: SetStartTag
GridSampler rename: ChGridSampler
HCPSampler rename: ChHCPSampler
MixtureIngredient rename: ChMixtureIngredient
setDefaultDensity rename: SetDefaultDensity
setDefaultMaterial rename: SetDefaultMaterial
setDefaultSize rename: SetDefaultSize
setDistributionCohesion rename: SetDistributionCohesion
setDistributionDensity rename: SetDistributionDensity
setDistributionFriction rename: SetDistributionFriction
setDistributionPoisson rename: SetDistributionPoisson
setDistributionRestitution rename: SetDistributionRestitution
setDistributionSize rename: SetDistributionSize
setDistributionYoung rename: SetDistributionYoung
PDSampler rename: ChPDSampler
Sampler rename: ChSampler

Types

Class Type Action
ChCoordsys Coordsys rename: ChCoordsysd
CoordsysF rename: ChCoordsysf
ChQuaternion Quaternion rename: ChQuaterniond
QuaternionF rename: ChQuaternionf
ChVector Vector rename: ChVector3d
VectorF rename: ChVector3f

Constants

Name Action
CH_C_1_PI remove
CH_C_2PI rename: CH_2PI
CH_C_DEG_TO_RAD rename: CH_DEG_TO_RAD
CH_C_E remove
CH_C_LN10 remove
CH_C_LN2 remove
CH_C_LOG10E remove
CH_C_LOG2E remove
CH_C_PI rename: CH_PI
CH_C_PI_2 rename: CH_PI_2
CH_C_PI_4 rename: CH_PI_4
CH_C_RAD_TO_DEG rename: CH_RAD_TO_DEG
CH_C_RPM_TO_RPS rename: CH_RPM_TO_RAD_S
CH_C_SQRT_1_2 remove
CH_C_SQRT_2 rename: CH_SQRT_2

Notes

  • The code for ChFunction classes was moved from src/chrono/motion_functions/ to src/chrono/functions/. As such, include headers should be changed to something like:

    #include "chrono/functions/ChFunctionSine.h"

  • The chrono::geometry namespace was removed. All geometry classes are now in the chrono namespace.

  • Chrono object identifiers were made read-only so that uniqueness can be guaranteed.

    • These integer identifiers are read-only and can be cached by the user (e.g., for searching in a ChAssembly). Identifiers are generated automatically in incremental order based on the order in which objects are created. As transient quantities, object identifiers are not serialized.
    • Chrono objects can now be tagged (using newly introduced functions SetTag/GetTag). Unlike object identifiers, object tags are completely under user control and not used anywhere else in Chrono. Tags are serialized and de-serialized.

  • Functions that duplicated C++ Standard Library functions were removed and replaced with the corresponding C++ function (e.g., ChMin was obsoleted in favor of std::min).

  • The enum AngleSet (previously defined in ChQuaternion.h) was renamed to RotRepresentation and moved to a new header named ChRotation.h.

  • All free functions for converting from one rotation representation to another are now located in ChRotation.h. These functions have consistent names of the form XxxFromYyy.

    Old (in ChQuaternion.h) New (in ChRotation.h)
    - AngleSetFromAngleSet
    - AngleSetFromRodriguez
    - RodriguezFromAngleSet
    - QuatFromRotVec
    - RotVecFromQuat
    Angle_to_Quat QuatFromRodriguez
    Angle_to_Quat QuatFromAngleSet
    AngleDT_to_QuatDT QuatDtFromAngleSet
    AngleDT_to_QuatDT QuatDtFromRodriguez
    AngleDTDT_to_QuatDTDT QuatDt2FromAngleSet
    AngleDTDT_to_QuatDTDT QuatDt2FromRodriguez
    ImmQ_complete QuatFromImaginary
    ImmQ_dt_complete QuatDtFromImaginary
    ImmQ_dtdt_complete QuatDt2FromImaginary
    Q_from_AngAxis QuatFromAngleAxis
    Q_from_AngX QuatFromAngleX
    Q_from_AngY QuatFromAngleY
    Q_from_AngZ QuatFromAngleZ
    Q_from_Euler123 QuatFromAngleSet
    Q_from_NasaAngles QuatFromAngleSet
    Q_from_Vect_to_Vect QuatFromVec2Vec
    Q_to_AngAxis AngleAxisFromQuat
    Q_to_Euler123 AngleSetFromQuat
    Q_to_NasaAngles AngleSetFromQuat
    Qdt_from_AngAxis QuatDtFromAngleAxis
    Qdtdt_from_AngAxis QuatDt2FromAngleAxis
    Quat_to_Angle RodriguezFromQuat
    Quat_to_Angle AngleSetFromQuat

  • For consistency, functions for transforming a ChFrame or a ChCoordsys from one reference to another (TransformFromLocalToParent and TransformFromParentToLocal) were modified so that they return the transformed object (previously, the returned object was pased as an argument). For clarity, we removed functions such as ChFrame::TransformLocalToParent(const ChVector<>& local) to express a 3D vector given in local coordinates to the parent frame. Use instead ChFrame::TransformPointLocalToParent.

  • ChLinkMate and derived classes have been rewritten so that:

    • for links with a single DOF, the relevant axis is Z, in line with ChLinkLock formulation (e.g., a ChLinkMatePrismatic allows translation along the Z axis of the link frame, a ChLinkMateRevolute allows rotation about the Z axis of the link frame, etc.).
    • for links with 2 DOFs, the relevant axes are X and Y. The exception to this is ChLinkMateRackPinion which uses the Z axis of the link frame as axis of rotation for the pinion and the X as direction of translation for the rack.
    • the 'flipped==true' state now refers to axes that are counter-aligned.

  • Link objects used to consider just one frame as 'principal' (usually 'frame 2'), thus returning reaction forces, frame position, as well as any other information with respect to this frame only.

    • For consistency and to remove ambiguity, all links (connections between two physical items) now report two frames, one on each connected object. These frames, expressed in the absolute coordinate frame can be obtained through the functions GetFrame1Abs and GetFrame2Abs. Certain derived classes (notably those connecting two ChBody objects, in particular all classes representing kinematic joints) also provide functions to return the link frames expressed in the frame of the corresponding connected body (GetFrame1Rel and GetFrame2Rel).
    • Similarly, all link objects now provide functions to return the reaction force and torque at the location of the link frame on the connected object. These reactions are expressed in the corresponding link frame and can be obtained, as a wrench, through calls to GetReaction[1|2].

  • The signature of all ChLink Initialize() functions were changed to consistently use ChFrame objects to specify link position and alignment (where previously some of them used ChCoordsys). A corresponding change was done for the constructor of vehicle::ChVehicleJoint.

  • The ChLoad class (loads on physics items via ChLoader objects) was changed to a non-templated class. Instead of specifying the ChLoader as a template parameter, a shared pointer to a ChLoader is now passed as a constructor argument. This streamlines the code and allows proper SWIG wrapping for use in Python or C# codes. All pre-defined ChLoader classes (e.g., ChLoaderPressure, ChLoaderGravity, ChLoaderBeamWrench, etc.) were updated accordingly. An example of a user-provided loader class (derived from some ChLoader) is as follows:

    class MyLoader : public ChLoaderUatomic {
  public:
    MyLoader(std::shared_ptr<ChLoadableU> loadable) : ChLoaderUatomic(loadable) {}

    virtual void ComputeF(const double U,              // normalized line position
                          ChVectorDynamic<>& F,        // load at U (set to zero on entry)
                          ChVectorDynamic<>* state_x,  // if non-null, first update position to this
                          ChVectorDynamic<>* state_w   // if non-null, first update velocities to this
                          ) override {
        // Compute F = F(U)...
    }
};

auto loader = chrono_types::make_shared<MyLoader>(object);
auto load = chrono_types::make_shared<ChLoad>(loader);
load_container->Add(load);

  • ChStream classes were simple wrappers around C++ output streams. The entire code has been now refactored to operate on STL streams directly, in order to simplify the API and to allow the user a more familiar interaction with streams in Chrono.

    • the operator<< associated to ChStreamOutAscii has been removed: this means that it is not possible to stream custom classes through this operator; this option has been replaced by appropriate overloads of STL streams (clearly limited to data members publicly accessible) or by the direct usage of ChOutputASCII.
    • ChStream[In/Out]Binary features to operate on streams through the read|write methods have been incorporated into the one class that was using it, namely ChArchiveBinary.

  • ChArchive classes have been refactored to adapt to the direct use of STL streams and have been renamed for consistency and clarity.

    • proper serialization/de-serialization classes kept the same name:
      • ChArchiveJSON[In/Out]
      • ChArchiveXML[In/Out]
      • ChArchiveBinary[In/Out]
    • auxiliary classes which, while still leveraging the ChArchive features, allow only export but not loading back objects were renamed:
      • ChArchiveAsciiDump → ChOutputASCII
      • ChArchiveExplorer → ChObjectExplorer

  • Solver access through ChSystem was removed. The functions SetSolverMaxIterations, SetSolverTolerance, and SetSolverForceTolerance were controlling only a subset of solver parameters and only for iterative solvers. Instead, the user must set solver parameters directly on the solver object. This is straightforward for the case where the user explicitly creates a solver object and attaches it to the system with ChSystem::SetSolver. For the case where the default solver is used or where the solver is set through ChSystem::SetSolverType, we implemented a mechanism on ChSolver and derived classes which permits identifying the solver type and setting solver parameters without the need for dynamic casting and testing. This mechanism is provided through ChSolver functions and can be used as illustrated below:

    if (my_system.GetSolver()->IsIterative()) {
   my_system.GetSolver()->AsIterative()->SetMaxIterations(100);
   my_system.GetSolver()->AsIterative()->SetTolerance(1e-6);
}

    or

    my_system.SetSolverType(ChSolver::Type::BARZILAIBORWEIN);
my_system.GetSolver()->AsIterative()->SetMaxIterations(20);

  • We removed the option of setting an integration step size for the types of analyses that require it. Instead, the desired step size value is always explicitly passed as an argument to the ChSystem function that initiates that analysis (e.g., DoStepDynamics). The current value of the step size (which may be adjusted internally in certain situations) is cached and can still be queried with ChSystem::GetStep. This is typically needed only internally but can also be used in user code that requires it.

    Similarly, we removed the function ChSystem::SetMaxiter which allowed setting the maximum number of iterations for the system assembly analysis. This quantity can now be passed through an optional argument to ChSystem::DoAssembly (default value: 6).

  • ChKblock::Build_K (now ChKRMBlock::PasteInto) reversed the meaning of the last argument (was add, now overwrite) in accordance to the signature of PasteMatrix; Also ChVariable::Build_M (now PasteMassInto) is not taking the position in which the mass should be placed but the offset with respect to the ChVariable::offset

  • The ChTimer class was refactored so that GetTimeMicroseconds, GetTimeMilliseconds, and GetTimeSeconds return either an intermediate time (if the timer was started but not stopped; in this case the timer keeps running) or the timer value when the timer was stopped. The old functions GetTimeMicrosecondsIntermediate, GetTimeMillisecondsIntermediate, and GetTimeSecondsIntermediate were obsoleted.

[Added] Functional Mock-Up Interface (FMI) support

The Functional Mock-up Interface is an open (tool-independent) standard for exchanging dynamical simulation models between different tools in a standardized format. These models are encapsulated in so-called Functional Mock-Up Units (FMU) which contain a description of the model (as an XML file) and binaries (as shared libraries).

FMI support in Chrono is provided via (1) fmu-tools, a general-purpose, stand-alone library for exporting and importing FMUs and (2) Chrono::FMI, a module with Chrono-specific extensions to facilitate working with FMU variables wrapping Chrono types.

At this time, only the FMI 2.0 standard is supported (with FMI 3.0 support coming later). The stand-alone fmu_tools library provides support for exporting and importing both Co-Simulation and Model Exchange FMUs. Currently, Chrono:FMI focuses only on Co-Simulation FMUs.

[Added] Chrono::Sensor features and updates

Updates and Bug Fixes

  • Upgraded to Optix 7.7, requiring NVIDIA drive 530.41 or newer
  • Fixed issues with CUDA NVRTC runtime compilation of Optix shaders

New Features

  • Added supprt for Area Lights (rectangular shaped). Can be added to a scene using ChScene::AddAreaLights(ChVector3f position, ChColor color, float max_range, ChVector3f du, ChVector3f dv).
  • Added support for rendering emissive surfaces. When defining a visual material, set ChVisualMaterial::SetEmissiveColor(ChColor color) and set ChVisualMaterial:SetEmissivePower(float power).
  • Added a Depth Camera sensor (ChDepthCamera). The Depth Camera is initialized in the same manner as ChCameraSensor , with each pixel containing depth information of the scene in meters (m).
  • Added support for the Hapke BRDF model to render celestial bodies (ex: Lunar regolith). To enable, when defining a material set ChVisualMaterial:SetUseHapke(bool enableHapke) and set the model parameters using ChVisualMaterial:SetHapkeParameters(float w,...). More information regarding the Hapke model and its parametrization can be found in https://doi.org/10.1002/2013JE004580.
  • Added a Random Walk based noise model for GPS sensor. To enable this noise model, when adding a ChGPSSensor, set a pointer to a ChNoiseRandomWalks object as the noise model parameter.

[Added] Chrono::ROS module

A new module (Chrono::ROS) has been introduced to support direct integration of ROS 2 with Chrono. Chrono::ROS provides a bridge between the Chrono simulation and the ROS 2 middleware, allowing for communication of sensor data, vehicle and transformation data, and more. Compatibility with specific Chrono modules, including Chrono::Vehicle and Chrono::Sensor, is provided. In addition to providing a few default publishers and subscribers, the module exposes an API for creating custom ROS 2 logic within the Chrono simulation.

The ChROSManager class is the main interface for the Chrono::ROS module. It maintains a single ChROSInterface object which wraps a ROS 2 node and provides the ability to create publishers and subscribers. The ChROSHandler class is the base class which all ROS 2 logic (i.e. publishers, subscribers, etc.) inherit from. During initialization, the ChROSInterface in the ChROSManager is passed to the ChROSHandler object through the ChROSHandler::Initialize function. This allows the ChROSHandler object to create ROS 2 objects. Over the course of the simulation, the ChROSManager calls ChROSHandler::Tick on each handler at a fixed rate to update each handler relative to the simulation time. As Chrono may run faster or slower than wall time, it's recommended to set ROS 2 /use_sim_time to true in all ROS nodes. Multiple nodes may be created by setting the node name in the ChROSManager constructor.

Python bindings are also provided for the Chrono::ROS module. It can be imported via the pychrono.ros module. ROS 2 doesn't directly support wrapping of it's C++ API for use in python, and so a special ChROSPythonManager class was created for situations where you need direct access to the ROS 2 API (such as creating a custom handler). When the ChROSPythonManager is used, two nodes are created: the original C++ rclcpp node in ChROSManager/ChROSInterface and the new rclpy-based node. The node name for the rclpy node (settable via the constructor) is always the rclcpp node name with _py appended. This allows for the creation of ROS 2 publishers and subscribers in python (as two nodes can't have the same name). All python-based handlers (i.e. when a custom handler inherits from ChROSHandler in python) must be added to the ChROSPythonManager object, not the ChROSManager object. All C++-based handlers can be added to either the ChROSManager or ChROSPythonManager objects, as in the ChROSManager may still be used if custom handlers aren't created in python.

The Chrono::ROS module currently only supports ROS 2 humble, and no additional dependencies are required beyond the ROS 2 installation. To build the Chrono::ROS module, set the cmake option ENABLE_MODULE_ROS to ON.

Locations:

  • Chrono::ROS source code is maintained under src/chrono_ros/
  • Chrono::ROS python bindings are maintained under src/chrono_swig/interface/ros
  • Demos are located in src/demos/ros/
  • Unit tests are located in src/unit_tests/ros/

[Changed] Updated Chrono::VSG module

The Chrono::VSG module was updated to use newer version of the VSG libraries.

  • Adds shadow support (enabled in several demos).
  • Includes an optional argument to the ChVisualSystemVSG constructor to specify the tesselation resolution for round primitive shapes. This is provided as a number of divisions of a full circle, with a default value of 24, corresponding to a 15 degree angular increment.
  • No other changes to the public API.

The required VSG library versions are as follows:

  • vsg 1.1.0
  • vsgXchange 1.1.0
  • vsgExamples 1.1.0
  • vsgImGui - latest
  • assimp 5.3.1

If the above requirements are not met, an error is issued during CMake configuration (if the Chrono::VSG module is enabled).
The simplest way to satisfy the VSG version requirements is to build and install them using the scripts provided with the Chrono distribution (see the Chrono::VSG installation instructions).

[Added] New motion functions and filters

The following functions were added

  • ChFunction_BSpline: univariate B-Spline motion function, able to approximate or exactly interpolate given waypoints and derivatives
  • ChFunction_Cycloidal: smooth ramp function defined by amount of displacement and motion time
  • ChFunction_DoubleS: constant-jerk motion function, able to minimize motion time given velocity, acceleration and jerk kinematic constraints. These and all other ChFunctions are now able to compute up to third derivative.

In addition, the new non-linear filters utils::ChMotionlawFilter_SecondOrder and utils::ChMotionlawFilter_ThirdOrder were introduced for tracking raw signals with smooth motion profiles, on the fly.

[Changed] Updated ChBlender exporter to Blender4.0

Due to some obsoleted methods the ChBlender exported was not compatible with the latest Blender4.0. It is now updated.

[Added] Unilateral distance constraint

The ChLinkDistance has been expanded to include also unilateral distance constraints. Through SetMode/GetMode three different behaviors are now available:

  • BILATERAL (default): current_distance = imposed_distance;
  • UNILATERAL_MAXDISTANCE: current_distance < imposed_distance; (e.g. a rope)
  • UNILATERAL_MINDISTANCE: current_distance > imposed_distance;

For the latter two cases a VI solver is required since the unilateral constraints are non-smooth.

[Changed] Collision detection refactoring

This refactoring affects the specification of collision models and shapes attached to contactable objects, as well as the specification of a collision system associated with a Chrono physics system. With these changes, it is now possible to specify collision information in Chrono independent of a particular implementation (e.g., the Bullet-based collision detection or the Chrono-internal multicore collision detection system), both in term of collision models and collision systems. The refactored Chrono code synchronizes the API for specifying collision and visualization shapes and models, as well as the API for creating and associating collision and visualization systems.

The main code architecture changes and resulting API changes are as described below.

Basic geometric shapes

The set of basic geometric shapes and associated class hierarchy (see src/chrono/geometry/) was updated for consistency and to allow use as common low-level primitives for both collision and visualization shapes. The various basic geometric shapes inherit from ChLine, ChSurface, and ChVolume for 1-D, 2-D, and 3-D geometry, respectively. Each class encapsulates the geometric data necessary to completely describe that corresponding shape and implements methods specific to its manifold dimension (1, 2, or 3).

Collision shapes

This refactoring introduces classes for collision shapes, including both primitive shapes (e.g., ChCollisionShapeSphere) as well as compound objects (e.g., ChCollisionShapeTriangleMesh). See src/chrono/collision/. In general, these objects wrap a basic geometric shape to specify the collision shape geometry, optionally with some additional collision-specific information (e.g., the radius of a sphere-swept collision surface). All Chrono collision shapes contain a contact material (of type ChMaterialSurface) which are combined into composite contact material properties for each colliding pair. All Chrono collision shapes are generic, in that they are independent of a particular collision detection implementation.

Visual shapes

Simultaneously with the refactoring of collision detection in Chrono, the names of visual shapes were changed for consistency with corresponding collision shapes. See src/chrono/assets/.

This renaming follows the pattern ChSphereShape -> ChVisualShapeSphere.

Collision models

A collision model is a collection of collision shapes with associated transforms (the pose of the shape within the model). A collision model is populated by adding shapes with optional transforms. For example,

  auto ct_model = chrono_types::make_shared<ChCollisionModel>();
  auto ct_sphere = chrono_types::make_shared<ChCollisionShapeSphere>(ct_mat1, radius);
  auto ct_box = chrono_types::make_shared<ChCollisionShapeBox>(ct_mat2, length, width, height);
  ct_model->AddShape(ct_sphere, ChFrame<>());
  ct_model->AddShape(ct_box, ChFrame<>(ChVector<>(1,1,1), QUNIT));

Chrono collision models are generic, in that they are independent of a particular collision detection implementation. The function ChCollisionModel::BuildModel() was eliminated, as processing of generic collision shapes and models by a concrete collision detection system is deferred to a later time (namely, at initialization of the collision system). The function ChCollisionModel::ClearModel(), now renamed ChCollisionModel::Clear() still exists for special uses; in a typical user code, there is no need to call this function before populating the model with collision shapes.

Rigid body creation

A rigid body is created with no collision model by default. A collision model can optionally be attached to a rigid body (in fact, the collision model is managed by the parent class ChContactable:

  auto body = chrono_types::make_shared<ChBody>();
  body->AddCollisionModel(ct_model);

The collision model on a rigid body is assumed to be positioned at the body reference frame (which coincides with the body center of mass for a ChBody object, but may be non-centroidal for a ChBodyAuxRef).

Note that a body constructor need not specify anymore a "collision type". Similarly, the functions ChSystem::NewBody were obsoleted. With the current refactoring, a rigid body is independent of a particular collision detection system implementation.

For convenience, an alternative way of populating shapes in the collision model of a ChContactable is through the convenience function ChContactable::AddCollisionShape. This function can be called multiple times. A container collision model is created, as needed, the first time a collision shape is specified. The code snippets shown above can be thus be replaced with the following equivalent code:

  auto body = chrono_types::make_shared<ChBody>();
  auto ct_sphere = chrono_types::make_shared<ChCollisionShapeSphere>(ct_mat1, radius);
  auto ct_box = chrono_types::make_shared<ChCollisionShapeBox>(ct_mat2, length, width, height);
  body->AddCollisionShape(ct_sphere, ChFrame<>());
  body->AddCollisionShape(ct_box, ChFrame<>(ChVector<>(1,1,1), QUNIT));

In accordance with these changes, all ChBodyEasy*** classes were modified to remove from their constructors the last argument specifying a particular collision detection implementation.

After this refactoring, the specification of a collision model closely parallels the creation of a visualization model. For example,

  auto cshape = chrono_types::make_shared<ChCollisionShapeBox>(cmat, Xsize, Ysize, Zsize);
  body->AddCollisionShape(cshape);
  body->SetCollide(true);
  
  auto vshape = chrono_types::make_shared<ChVisualShapeBox>(Xsize, Ysize, Zsize);
  body->AddVisualShape(vshape);

The function ChContactable::GetCollisionModel still exists and can be used to access the collision model of a body after it was created and attached to the body (this may be required to set optional parameters on the collision model, such as collision envelope, collision family, or collision family masks).

Finally, note that the function BuildModel was obsoleted as there is no need anymore to indicate the end of specification of a collision model; indeed, processing of the generic collision models now occurs at a later time, during initialization of the collision detection system (see below).

Creation and association of a collision system

By default, a Chrono physics system has no associated collision system. To enable collision detection and contact force interaction in a Chrono simulation, a collision system (ChCollisionSystemBullet, ChCollisionSystemMulticore, or potentially some other 3rd-party collision detection system) must be created and associated to the ChSystem. This can be done as follows:

  auto coll_sys = chrono_types::make_shared<ChCollisionSystemBullet>();
  // set parameters specific to the concrete collision system implementation
  sys->SetCollisionSystem(coll_sys);

Alternatively, one of the two collision systems currently available in Chrono can be associated using:

  sys->SetCollisionSystemType(ChCollisionSystem::Type::BULLET);

or

  sys->SetCollisionSystemType(ChCollisionSystem::Type::MULTICORE);

If setting a collision system by type, the user can use ChSystem::GetCollisionSystem to access the underlying collision system in order to modify its settings or parameters.

Processing of all collision models specified for physics items in a Chrono system is performed (implementation-specific) during initialization of the collision system. This can be done by explicitly invoking ChCollisionSystem::Initialize() after all collision models have been specified and before performing any type of physics analysis or simulation. The Initialize function invokes the BindAll method of a particular collision system implementation. In most cases, the ChCollisionSystem::Initialize() method need not be explicitly invoked by the user as this is done automatically internally to Chrono before start of an analysis or simulation (and only once).

In addition to BindAll, a concrete collision system implementation also provides a function BindItem which can be used to request the collision system to process the collision model of a Chrono physics item after the collision system was initialized (for example, in situations where bodies are created at run-time).

[Changed] Application of terrain forces to vehicle systems

Chrono offers several mechanism for applying external forces to rigid bodies in a multibody system. The first one, and arguably the easiest to implement in user code, relies on so-called accumulators for an external force an moment (accumulated as a resultant wrench at the body center of mass). It is the responsibility of the user to clear the body accumulator before loading updated forces and torques that will be applied next (e.g., over the next dynamics step). While simple to use, this approach is also fragile and a potential source of mistakes; indeed, there is no way to control if the same body accumulators are not being used simultaneously in different parts of the code. Other mechanisms for applying external forces and torques are (i) creating objects of type ChForce (which can represent either a force or a torque) and associating an arbitrary number with any rigid body; and (ii) using objects of type ChLoad which associate a so-called "loadable" (e.g., a rigid body or an FEA node) with a load (concentrated, surface-distributed, or volumetric) and managing them in so-called "load containers" in the underlying Chrono system.

Because of the limitations and potential pitfalls of the accumulator approach, this is best left only for use in user code. As such, all modeling elements in Chrono::Vehicle were switched to using loads and load containers. In the case of vehicle systems, these external loads represent the action of the terrain on the vehicle running gear (wheel spindles or track shoes, for wheeled and tracked vehicles, respectively).

As part of this change, the API for synchronizing the dynamic simulation of tracked vehicles at the beginning of a time step was simplified. Indeed, when using any of the available Chrono terrain systems (rigid or deformable) in a monolithic simulation setting, the interaction between terrain and track shoes leverages the underlying Chrono collision and contact system. As such, there is no need for the user to explicitly pass null terrain interaction forces which were eliminated from the signature of ChTrackedVehicle::Synchronize function. The version that takes lists of such terrain forces (one per track shoe) is still available, for use in co-simulation (such as the Chrono::Vehicle terrain-vehicle co-simulation framework).

[Changed] Modifications to the HHT integrator

As part of an ongoing set of changes to the implicit integrator based on the Hilber-Hughes-Taylor (HHT) method, ChTimestepperHHT was modified to eliminate the so-called "position" formulation (which had no proper theoretical support and was anyway not appropriate for systems that included bodies or nodes with rotational degrees of freedom). The current implementation, only provides the acceleration-level formulation suitable for the 2nd order multibody equations of motion.

A numerical estimate of the rate of convergence for the underlying Newton solver is now evaluated internally (note that this convergence rate estimate can be calculated only after the third iterations; as such, a value of 1 is set for the first two iterations). The last convergence rate estimate is user-accessible through the GetEstimatedConvergenceRate function; together with the reported number of Newton iterations during the last integration step, this can be monitored in user code to provide an indicator of possible numerical difficulties in solving the system dynamics.

[Added] Modeling hydraulic circuit elements and hydraulic actuators

Initial support was added for modeling elements of hydraulic circuits, including hydraulic pistons, directional valves, and throttle valves. These physics components are modeled with underlying dynamics described by ODEs based on the so-called lumped fluid approach. Two models of hydraulic actuators are also provided. The first one, ChHydraulicActuator2 uses a hydraulic circuit with two volumes composed of a pump, a tank, a hydraulic cylinder, and a directional valve connected with two hoses. The second actuator, ChHydraulicActuator3 models a hydraulic circuit with three volumes and also includes a throttle valve (as well as an additional hose). The hydraulic actuators are controlled by providing an actuation function which defines the desired (reference) spool position of the directional valve as a function of time; this reference, specified through a ChFunction object, can be either pre-defined for the time interval of interest or else adjusted interactively (for example, using a ChFunction_Setpoint that is updated externally from some user input).

The underlying dynamics of the hydraulic actuator models are described as ODEs (for the current valve spool position and for the relevant pressures in the hydraulic circuit) and are implemented based on the ChExternalDynamics functionality.

Hydraulic modeling components can be used coupled with a Chrono mechanical system in a monolithic simulation, or else co-simulated. These two options are illustrated with a simple model of a hydraulically actuated crane in demo_MBS_hydraulic_crane and demo_MBS_hydraulic_crane_cosim, respectively.

If used in a tight coupling with a Chrono multibody system, a ChHydraulicActuator is connected between two points on two different bodies, e.g.,

  auto actuator = chrono_types::make_shared<ChHydraulicActuator2>();
  actuator->SetInputFunction(actuation);
  actuator->Cylinder().SetInitialChamberLengths(0.221, 0.221);
  actuator->Cylinder().SetInitialChamberPressures(3.3e6, 4.4e6);
  actuator->DirectionalValve().SetInitialSpoolPosition(0);
  actuator->Initialize(ground, crane, true, attachment_ground, attachment_crane);  // connect two bodies
  sys.Add(actuator);

In this case, the initial and current actuator length is inferred from the states of the connected bodies and the distance between the connection points, while the actuator forces are directly applied to the connected bodies.

If used in a co-simulation setting, the actuator is initialized stand-alone:

  auto actuator = chrono_types::make_shared<ChHydraulicActuator2>();
  actuator->SetInputFunction(actuation);
  actuator->Cylinder().SetInitialChamberLengths(0.221, 0.221);
  actuator->Cylinder().SetInitialChamberPressures(3.3e6, 4.4e6);
  actuator->DirectionalValve().SetInitialSpoolPosition(0);
  actuator->SetActuatorInitialLength(s0);
  actuator->Initialize();                                                        // initialize stand-alone
  sys.Add(actuator);

In this case, the current actuator length is provided from the outside, while the force generated by the actuator can be extracted with the ChHydraulicActuatorBase::GetActuatorForce function, thus allowing a force-displacement co-simulation setup.

[Added] Support for modeling components with internal dynamics (ODE)

The new base class ChExternalDynamics allows modeling and inclusion in a Chrono system of a physics item that carries its own dynamics, described as a set of Ordinary Differential Equations (ODE). The states of such components are appended to those of the containing system and are integrated simultaneously with the system's equations of motion. These states can be accessed and used coupled with other components.

A user-provided modeling element inherits from ChExternalDynamics and defines the ODE initial value problem by implementing, at a minimum, the functions SetInitialConditions (to provide the ODE initial conditions) and CalculateRHS (to provide the ODE right-hand side function). Optionally, a derived class may also implement CalculateJac to provide the Jacobian of the right-hand side function with respect to the ODE states. The Jacobian is used only is the physics component is declared as stiff (by overriding the function IsStiff); if a Jacobian function is not provided, a finite-difference approximation is used.

This mechanism can be used to include external, black-box dynamics components into a Chrono simulation (e.g., controllers, actuators, ADAS vehicle components, etc.) and will be extended in the future to also support components with dynamics described as Differential Algebraic Equation (DAE) systems.

A simple illustration of using this new feature is provided in demo_MBS_external_dynamics for solving non-stiff and stiff versions of the Van der Pol oscillator. The full definition of the user-provided derived class in that case is:

class VanDerPolODE : public ChExternalDynamics {
  public:
    VanDerPolODE(double mu) : m_mu(mu) {}

    virtual int GetNumStates() const override { return 2; }

    virtual bool IsStiff() const override { return m_mu > 10; }

    virtual void SetInitialConditions(ChVectorDynamic<>& y0) override {
        y0(0) = 2.0;
        y0(1) = 0.0;
    }

    virtual void CalculateRHS(double time,                 // current time
                              const ChVectorDynamic<>& y,  // current ODE states
                              ChVectorDynamic<>& rhs       // output ODE right-hand side vector
                              ) override {
        rhs(0) = y(1);
        rhs(1) = m_mu * (1 - y(0) * y(0)) * y(1) - y(0);
    }

    virtual bool CalculateJac(double time,                   // current time
                              const ChVectorDynamic<>& y,    // current ODE states
                              const ChVectorDynamic<>& rhs,  // current ODE right-hand side vector
                              ChMatrixDynamic<>& J           // output Jacobian matrix
                              ) override {
        // Do not provide Jacobian information if problem not stiff
        if (!IsStiff())
            return false;

        // Generate analytical Jacobian
        J(0, 0) = 0;
        J(0, 1) = 1;
        J(1, 0) = -2 * m_mu * y(0) * y(1) - 1;
        J(1, 1) = m_mu * (1 - y(0) * y(0));
        return true;
    }

  private:
    double m_mu;
};

[Changed] Renamed SPHTerrain and RCCar vehicle classes

For consistency, better suited names were given to the following classes:

  • SPHTerrain was renamed to CRMTerrain (deformable terrain using the Continuous Representation Model, an SPH-based granular formulation)
  • RCCar was renamed to ARTcar (the Autonomy Research Testbed car)

[Changed] Moved drive mode to automatic transmissions

The concept of a drive mode was moved from ChTransmission to ChAutomaticTransmission as it is something that only exists for automatic transmissions. This is an API change.

[Changed] Transmission gear numbering

Reverse gear is now indicated as -1, making room for a neutral gear as 0. Positive numbers are still forward gears. This is a semantic change to the existing API so please review your code as your IDE will most likely not pick up on it. Added to the API is a method to return the highest (forward) gear that is available.

[Added] Redundant constraints remover

It is quite common to spot models, even in Chrono demos, where the number of constraints are even greater than the number of variables. While this is allowed in Chrono systems, it should be considered a bad practice. Redundant constraints unnecessarily increase the size of the problem, lead to noisy measurements of the link reactions, cause instability to direct solvers.
Taking care of adding only the required number of constraints is - and always will be - the best option for the user. However, whenever this approach might be too tedious or impractical, it is now possible to ask the system to get rid of those redundant constraints by calling:

system.RemoveRedundantConstraints()

It is recommended to:

  • set the model to a generic configuration before the call, since there might be cases in which the redundancy of the constraints is due to a particular system configuration;
  • initially set the verbose to true to double check which constraints have been removed.

[Changed] Serialization expanded and improved

Serialization is now capable of storing and loading back entire ChSystems consistently. Available classes include rigid bodies along with their visual assets (excluding ChVisualShapeFEA) and collision models, links (both ChLinkMate and ChLinkLock families), shafts, system solvers and collision systems. More classes will become available in the next future.

An additional macro called CH_UPCASTING now allows to properly handle those classes with multiple inheritance: if a class, or any of its parent classes, shows multiple inheritance it is strongly recommended to specify its inheritance scheme with the new CH_UPCASTING macro:

CH_UPCASTING(Derived, Base1)
CH_UPCASTING(Derived, Base2)

Assuming a more complex scheme, e.g. C1->D1 / A->B
C2->D2->E

CH_UPCASTING(A, B)
CH_UPCASTING(B, C1)
CH_UPCASTING(C1, D1)
CH_UPCASTING(B, C2)
CH_UPCASTING(C2, D2)
CH_UPCASTING(D2, E)

Further insights can be found in the documentation of the CH_UPCASTING macro. An additional CH_UPCASTING_SANITIZED macro is offered for those classes whose type contains characters not valid for a class name. For example ChContactable_1vars<6> is handled through the following:
CH_UPCASTING_SANITIZED(ChBody, ChContactable_1vars<6>, ChBody_ChContactable_1vars_6)

[Changed] Rewrite of Pac02 handling tire model

Some of the salient characteristic of the updated Pac02 handling tire model (implemented in the ChPac02Tire class) are:

  • performs only steady state calculations.
  • Fx and Fy can be combined by the Pacejka cosine weighting functions (requires specification of accurate coefficients).
  • the friction ellipsis code has been removed (if the approach based on the friction ellipsis combination method is acceptable, it is better to use the TMEasy or TMsimple tire models which are much simpler and offer the same level of accuracy).
  • Pac02 model parameters can be set directly as before, but now can also be specified through an ADAMS/Car-compatible TIR file. Note that such TIR files may contain data for alternate tire models (such as Fiala or Pac89); if provided such a file, a Pac02 tire will not be initialized.

Setting Pac02 tire parameters through the C++ API is done as before. For example,

  m_par.UNLOADED_RADIUS = 0.345;
  m_par.LFZO = 1.0;

Note that the names of member variables in the MFCoeff structure m_par are now in all-caps for consistency with the format of TIR files.

The concrete tire subsystem Pac02Tire class reads a full specification of a Chrono Pac02 tire from a JSON file. There are two ppossibilities:

  1. Referencing a TIR file. For example: 
    {
 "Name": "Magic Formula Tire from ADAMS/Car TIR file",
 "Type": "Tire",
 "Template": "Pac02Tire",
 "Mass": 16.0,
 "Inertia": [
     1.021213842086728,
     1.828238395872898,
     1.021213842086728
 ],
 "TIR Specification File" : "VW_microbus/json/mf_185_80R14.tir",
 "Coefficient of Friction": 0.8,
 "Visualization": {
     "Mesh Filename Left":  "VW_microbus/van_tire.obj",
     "Mesh Filename Right": "VW_microbus/van_tire.obj",
     "Width": 0.185
 }
}
  2. Explicitly setting all tire parameters. For example: 
    {
 "Name": "Magic Formula Tire from parameters",
 "Type": "Tire",
 "Template": "Pac02Tire",
 "Mass": 16.0,
 "Inertia": [
     1.021213842086728,
     1.828238395872898,
     1.021213842086728
 ],
 "Coefficient of Friction": 0.8,
 "Use Mode" : 3,
 "Dimension": {
     "Unloaded Radius": 0.376,
     "Width": 0.185,
     "Aspect Ratio": 0.85,
     "Rim Radius": 0.1778,
     "Rim Width": 0.17
 },
"Vertical": {
     "Vertical Stiffness": 332736.8,
     "Vertical Damping": 2307.3,
     "Nominal Wheel Load": 4700.0
 },
 "Scaling Factors": {
     "LFZO" : 1,                         // Scale factor of nominal (rated) load
     "LCX" : 1,                          // Scale factor of Fx shape factor
     "LMUX" : 1,                         // Scale factor of Fx peak friction coefficient
     "LEX" : 1,                          // Scale factor of Fx curvature factor
 // etc...
     "LKYG" : 1,
     "LCZ" : 1                           // Scale factor of vertical stiffness
 },
 "Longitudinal Coefficients": {
     "PCX1" : 1.5587,                    // Shape factor Cfx for longitudinal force         
     "PDX1" : 1.09,                      // Longitudinal friction Mux at Fznom         
     "PDX2" : -0.079328,                 // Variation of friction Mux with load         
     "PDX3" : 9.9376e-006,               // Variation of friction Mux with camber         
 // etc...
     "PTX2" : -0.0014739,                // Variation of SigKap0/Fz with load         
     "PTX3" : 0.03631                    // Variation of SigKap0/Fz with exponent of load         
 },
 "Lateral Coefficients": {
     "PCY1" : 1.4675,                    // Shape factor Cfy for lateral forces         
     "PDY1" : 0.94002,                   // Lateral friction Muy         
     "PDY2" : -0.17669,                  // Variation of friction Muy with load         
     "PDY3" : -0.69602,                  // Variation of friction Muy with squared camber         
 // etc...
     "RVY6" : 0,                         // Variation of Svyk/Muy*Fz with atan(kappa)         
     "PTY1" : 1.8473,                    // Peak value of relaxation length SigAlp0/R0         
     "PTY2" : 1.9465                     // Value of Fz/Fznom where SigAlp0 is extreme         
 },
 "Aligning Coefficients": {
     "QBZ1" : 9.2824,                    // Trail slope factor for trail Bpt at Fznom         
     "QBZ2" : -2.6095,                   // Variation of slope Bpt with load         
     "QBZ3" : -0.86548,                  // Variation of slope Bpt with load squared         
     "QBZ4" : -0.16332,                  // Variation of slope Bpt with camber         
     "QBZ5" : -0.35511,                  // Variation of slope Bpt with absolute camber         
     "QBZ9" : 13.946,                    // Slope factor Br of residual torque Mzr         
     "QBZ10" : 0,                        // Slope factor Br of residual torque Mzr         
 // etc...
     "SSZ1" : 0.026243,                  // Nominal value of s/R0: effect of Fx on Mz         
     "SSZ2" : -0.013391,                 // Variation of distance s/R0 with Fy/Fznom         
     "SSZ3" : 0.3923,                    // Variation of distance s/R0 with camber         
     "SSZ4" : -0.16022,                  // Variation of distance s/R0 with load and camber         
     "QTZ1" : 0.2,                       // Gyration torque constant         
     "MBELT" : 3.5                       // Belt mass of the wheel         
 },
 "Overturning Coefficients": {
     "QSX1" : 0,                         // Lateral force induced overturning moment         
     "QSX2" : 0,                         // Camber induced overturning couple         
     "QSX3" : 0                          // Fy induced overturning couple         
 },
 "Rolling Coefficients": {
     "QSY1"                     : 0.01,  // Rolling resistance torque coefficient         
     "QSY2"                     : 0,     // Rolling resistance torque depending on Fx         
     "QSY3"                     : 0,     // Rolling resistance torque depending on speed         
     "QSY4"                     : 0      // Rolling resistance torque depending on speed ^4         
 },
 "Visualization": {
     "Mesh Filename Left":  "VW_microbus/van_tire.obj",
     "Mesh Filename Right": "VW_microbus/van_tire.obj",
     "Width": 0.185
 }
}

Notes:

  • not all masses and inertia values are read from the TIR file and as such must be set separately. This is because the magic formula has seen numerous updates over the years and some specification files include inertia properties while other do not.
  • TIR files may include data in units other than SI. The Chrono parser in Pac02Tire applies the appropriate conversions.
  • when specifying tire parameters explicitly (option 2 above), all units must be SI (fortunately, most Pac02 parameters are non-dimensional).
  • if a parameter is not explicitly set in the JSON file, it is set to a default value of 0.0; similarly, scaling factors not explicitly defined in the JSON file are set to a default value of 1.0.

[Added] New URDF parser

The miscellaneous parsers provided with Chrono have been reorganized in a separate module, Chrono::Parsers. This module (and associated library) include the previous OpenSim and Adams parsers (previously part of the core Chrono library, as well as the Python parser (previously a separate library built together with the PyChrono wrapper libraries). In addition, the Chrono::Parsers module has a new parser which can populate a Chrono system with a mechanism specified through a URDF (Unified Robotics Description Format) file.

ChParserURDF is implemented based on the canonical ROS URDF parser, urdfdom and supports all modeling elements that can be specified through URDF. These include bodies and joints (revolute, prismatic, fixed, or free), visualization geometry, and collision geometry. URDF is limited to specifying only open-loop mechanisms, but additional joints can be added to the Chrono system once the input URDF file was parsed and processed.

Some of the more important capabilities of the ChParserURDF parser are:

  • enabling specific joints as actuated (i.e., create Chrono motors instead of kinematic joints);
  • support for different types of actuation (position/angle, linear speed/angular speed, or force/torque, depending on whether using a linear or a rotation motor);
  • specification of different contact materials on different bodies;
  • support for different interpretations of collision meshes (as triangular meshes, convex hulls, or node clouds);
  • support for arbitrary actuation functions (on joints converted to Chrono motors).

In addition, a utility class (ChRobotActuation) was implemented to allow actuation of robot motors using interpolated data from files. This actuator class allows specifying a series of different phases for a generic robotic mechanism, including phases for assuming a start pose, the cycle phase itself, and a stopping phase to reach a rest pose. The ChRobotActuation allows definition of a custom callback for user-defined actions at each phase transition.

To build the Chrono URDF parser when the Chrono::Parsers module is enabled (set ENABLE_MODULE_PARSERS to ON during CMake configuration), several dependency libraries must be provided. For convenience, bat and shell scripts (for Windows and Linux, respectively) are provided in the Chrono distribution (under contrib/build-scripts/urdf).

Two example URDF models are provided: the R2D2 model from the ROS URDF tutorial and the previously available RoboSimian robot.

See demo_PARSER_URDF for an illustration of reading and visualizing a robot specified through URDF. See demo_PARSER_URDF_RoboSimian for a more complex example of building and actuating a robot specified through URDF.

[Added] Support for STL 3D file format

We have added support for creating a triangular mesh (ChTriangleMeshConnected) from a binary STL () file. This is implemented through the functions ChTriangleMeshConnected::LoadSTLMesh() and ChTriangleMeshConnected::CreateFromSTLFile().

Even though the STL format uses a redundant representation in which vertices are replicated for each mesh face, the Chrono reader functions collapse identical vertices, thus providing a minimal mesh representation and connectivity information.

[Changed] Definition and use of primitive geometric shapes

Specification of low-level geometric shapes and their use as collision and visualization shapes was changed for consistency and a more intuitive API. The main changes can be described as follows:

  • Geometric shapes with a directional axis (e.g., cylinder, cone, capsule) are always aligned with the Z axis.
  • Size information is now provided through more intuitive quantities (full lengths for a box sides, axis lengths for an ellipsoid, radius and length for a cylinder or a cone, etc). Notable exceptions are:
    • a sphere is specified by its radius,
    • a capsule is specified by a radius and the length of its cylindrical portion.
  • Geometric data for a shape contains no information on pose of that shape when used as a collision or visualization shape. A transform (position and orientation) is specified only when a geometric shape is included in a visualization model or in a collision model. In particular, the specification of a cylinder by the coordinates of its end cap center points was removed. However, convenience functions are provided to facilitate this approach to constructing a cylindrical shape (see below).
  • For classes derived from ChVisualShape we provide constructors that take relevant arguments specifying the shape size; as such, access to the low-level underlying geometry (through the GetGeometry() functions) is needed only in very special situations.

While these changes affected a lot of the Chrono code base, user code must be updated only in a relatively few places:

  • Specification of ChVisualShape objects and inclusion in a visual model:

    Old code (visualization cylinder along Y axis):

    auto cyl = chrono_types::make_shared<ChCylinderShape>();
cyl->GetCylinderGeometry().p1 = ChVector<>(2, -0.2, 0);
cyl->GetCylinderGeometry().p2 = ChVector<>(2, 0.5, 0);
cyl->GetCylinderGeometry().rad = 0.3;
cyl->AddMaterial(orange_mat);
body->AddVisualShape(cyl);

    New code:

    auto cyl = chrono_types::make_shared<ChCylinderShape>(0.3, 0.7);
cyl->AddMaterial(orange_mat);
body->AddVisualShape(cyl, ChFrame<>(ChVector<>(2, 0.15, 0), Q_from_AngX(CH_C_PI_2)));

  • Addition of primitive collision shapes to a collision model:

    Old code (collision cylinder along Y axis):

    object->GetCollisionModel()->ClearModel();
object->GetCollisionModel()->AddCylinder(object_mat, radius, radius, hlen, ChVector<>(0), ChMatrix33<>(1));
object->GetCollisionModel()->BuildModel();

    New code:

    object->GetCollisionModel()->ClearModel();
object->GetCollisionModel()->AddCylinder(object_mat, radius, 2 * hlen, ChVector<>(0), Q_from_AngX(CH_C_PI_2));
object->GetCollisionModel()->BuildModel();

  • Creation of a ChBodyEasyCylinder:

    Old code:

    auto body = chrono_types::make_shared<ChBodyEasyCylinder>(radB, 0.4, 1000, true, false, mat);

    New code:

    auto body = chrono_types::make_shared<ChBodyEasyCylinder>(geometry::ChAxis::Y, radB, 0.4, 1000, true, false, mat);

Consult the various Chrono demos for examples of specifying visualization and collision shapes using the new API.

For convenience, the following mechanisms are provided to construct cylinders when the locations of the endcap centers are known:

  • visualization cylinder shape defined through its endcaps -- construct a helper ChLineSegment object:
geometry::ChLineSegment seg(ChVector<>(0, -(hl - 0.2) * sina, (hl - 0.2) * cosa),
                            ChVector<>(0, -(hl + 0.2) * sina, (hl + 0.2) * cosa));
auto cyl_2 = chrono_types::make_shared<ChCylinderShape>(0.3, seg.GetLength());
ground->AddVisualShape(cyl_2, seg.GetFrame());
  • collision cylinder shape defined through its end-caps -- use the alternative version of ChCollisionModel::AddCylinder:
bool AddCylinder(                                   //
      std::shared_ptr<ChMaterialSurface> material,  ///< surface contact material
      double radius,                                ///< radius
      const ChVector<>& p1,                         ///< first end point
      const ChVector<>& p2                          ///< second end point
  );

In conjunction with the above changes to the basic primitive shapes, several other updates were made for a more consistent and intuitive API:

  • all utility functions defined in utils::ChUtilsCreators.h were updated to follow the new conventions.
  • the utility function utils::AddBoxContainer was modified to construct a box volume with given dimensions centered at the origin of the provided reference frame (previously, the center of the "bottom" wall was at the frame origin).
  • the utility function fsi::AddBoxContaionerBCE (previously named fsi::AddContainerBCE) was modified to follow the same convention as above.

For users of the Chrono::Vehicle module, note that these changes do not affect use of any of the vehicle subsystem templates nor do they require any changes to JSON specification files.

[Changed] Chrono::Vehicle engine and transmission templates

New Chrono::Vehicle templates for the engine and transmission subsystems replace the old powertrain template. The new templates maintain the same modelling capabilities, but allow more flexibility in mixing and matching different models of engines with different transmission models. The coupling between an engine and a transmission is done at the motorshaft, with the engine providing the torque on this shaft and the transmission specifying the angular speed of the shaft. For interfacing with the vehicle system, an aggregate class, ChPowertrainAssembly, manages an engine and transmission and intermediates the coupling with a driveline vehicle subsystem through the driveshaft connecting the transmission to the driveline.

The following engine templates are available:

  • ChEngineShafts - template for modeling an engine using 1-D shaft elements and engine torque-speed maps including maps for engine losses.
  • ChEngineSimpleMap - template for a kinematic engine model based on torque-speed maps.
  • ChEngineSimple - template for a kinematic engine model based on a linear torque-speed dependency.

The following templates for automatic transmissions are available:

  • ChAutomaticTransmissionShafts - template for modelling an automatic transmission using 1-D shaft elements and a torque converter specified through the capacity factor and torque ratio maps.
  • ChAutomaticTransmissionSimpleMap - template for a kinematic model of an automatic transmission using shift maps.

Any of the above engine models can be coupled with either transmission model, as well with any Chrono::Vehicle driveline model (for either a wheeled or tracked vehicle).

While currently only templates for automatic transmissions are implemented, the new code design allows introduction of manual transmissions which will be implemented at a later date.

This code change requires modifications to any existing vehicle model, whether specified through a set of C++ classes providing concrete instantiations of various subsystem templates or else specified through a set of JSON files. Consult the vehicle models in the Chrono::Vehicle models library and the sample JSON specification files distributed with Chrono.

[Added] New generic template for wheeled suspension subsystems

A new Chrono::Vehicle template for modeling a wheeled vehicle suspension was added. The ChGenericWheeledSuspension class permits definition of a suspension subsystem with arbitrary, user-defined topology and sets of bodies, joints, and spring-damper elements. The only elements assumed to always exist in a suspension subsystem are the two spindles and the two axle shafts which connect the spindles to a driveline. A companion class, GenericWheeledSuspension allows definition of an arbitrary suspension subsystem based on a JSON specification file.

In this new template, modeling elements (bodies, joints, TSDAs, and RSDAs) are identified by their names. Positions and orientations are expected to be expressed relative to the suspension subsystem reference frame (except for collision and visualization shapes which must be provided relative to the associated physical modeling element). Any of the physical elements present in a suspension subsystem can be marked as "mirrored" or "non-mirrored"; in the former case, only the element on the left side (positive y) must be defined and two Chrono modeling elements are created, mirrored with respect to the x-z plane. Joints and spring-damper elements (TSDAs or RSDAs) can be connect any two bodies in the subsystem, as well as a suspension body to the chassis, a possible sub-chassis susbsystem, or a possible steering mechanism link. ChGenericWheeledSuspension provides a mechanism for identifying these three special bodies that are external to the suspension subsystem.

This new template allows for more flexibility in defining non-standard or concept suspension subsystems without the restrictions imposed by the existing Chrono::Vehicle suspension templates (in terms of the number of bodies, joints, force elements, and their connectivity). In fact, any of the existing suspension templates can be replicated in the new framework and two examples are provided: the HMMWV_DoubleWishboneFront_replica.json file contains an exact replica of the HMMWV front double wishbone suspension defined in HMMWV_DoubleWishboneFront.json, while UAZBUS_FrontSAELeafspringAxle_replica.json replicates the front suspension defined in UAZBUS_FrontSAELeafspringAxle.json; the latter example illustrates the definition of a suspension subsystem that includes both mirrored and non-mirrored components.

See demo_VEH_WheeledVehicle and demo_VEH_SuspensionTestRig which can be modified appropriately to use a HMMWV or UAZ vehicle with the new suspension specifications.

[Changed] CMake configuration and utility build scripts

For consistency, the following changes were made to some of the Chrono CMake configuration scripts:

  • Chrono::Irrlicht module: IRRLICHT_INSTALL_DIR replaces the old IRRLICHT_ROOT
  • Chrono::Multicore module: BLAZE_INSTALL_DIR replaces the old BLAZE_DIR
  • Chrono::Vehicle module: IRRKLANG_INSTALL_DIR and IRRKLANG_LIBRARY replace the old CH_IRRKLANG_SDKDIR and CH_IRRKLANGLIB, respectively
  • Chrono::Synchrono module: fastrtps_INSTALL_DIR replaces the old fastrtps_ROOT
  • Chrono::OpenGL module: finding the necessary GL dependencies (GLEW and GLFW) now relies on CMake project configuration scripts for these libraries. As such, unless automatically detected, the user must set the CMake variables GLEW_DIR and GLFW3_DIR. For systems where default packages for GLEW and GLFW do not install their CMake project configuration scripts (e.g., Ubuntu), see below for information on building these libraries from sources. For the headers-only GLM dependency, the user must set GLM_INCLUDE_DIR.

To help the configuration of certain Chrono modules, we added several scripts (for both Windows and Linux) to build dependencies from sources. The following scripts are available under contrib/build-scripts:

  • opencrg/buildOpenCRG.bat and opencrg/buildOpenCRG.sh can be used to build and install the OpenCRG library. Optionally, the script can first download the sources for version 1.1.2 of OpenCRG from a GitHub repository.
  • opengl/buildGL.bat and opengl/buildGL.sh can be used to build and install the GLEW, GLFW, and GLM dependencies for Chrono::OpenGL and Chrono::Sensor. The sources for these libraries are (optionally) downloaded from their respective SourceForce repositories. These scripts configure, build, and install all 3 necessary GL libraries under a common user-specified directory.
  • vsg/buildVSG.bat and vsg/buildVSG.sh can be used to build and install all dependencies required for the Chrono::VSG module. Their sources can be optionally be downloaded from their respective GitHub repositories. These scripts are provided as a more flexible and robust alternative to the vsgFramework approach to installing the necessary VSG dependencies. The buildVSG scripts install all necessary VSG libraries (VulkanSceneGraph, vsgXchange, vsgImGui, ImGui, ImPlot, vsgExamples, and assimp) under a common, user-specified directory. Follow the instructions listed in comments at the top of each one of the above build scripts.

Finally, the scripts buildChrono.bat (for Windows), buildChrono.sh (for Linux), and buildChronoMac.sh (for MacOS) are provided as examples of CMake configuration for the various Chrono modules. They should be copied to a different directory and modified to reflect the setup on the user machine and to enable only those Chrono modules of interest. When executed, these scripts run the CMake configuration of Chrono and generate the files for building the Chrono libraries, as appropriate on each platform.

[Added] SPHTerrain - continuum representation method for deformable terrain

A new Chrono::Vehicle terrain class, SPHTerrain, was added to model deformable terrain using the Continuum Representation Method (CRM), an SPH-based formulation that leverages the Chrono::FSI module. An SPHTerrain can be created from data files with positions of SPH particles and BCE markers read from data files (these positions are assumed to be provided on an integer grid, in multiples of the initial separation of SPH particles) or from a height-map image file. In addition, this type of terrain permits definition of rigid obstacles that may be embedded, partially or fully, in the terrain volume (to model, for example, embedded rocks); currently, rigid obstacles must be specified with trimesh geometry read from a Wavefront OBJ file. Run-time visualization is supported through ChFsiVisualizationVSG or ChFsiVisualizationGL which leverage the Chrono::VSG and Chrono::OpenGL modules, respectively. See demo_VEH_SPHTerrain_Obstacles, demo_VEH_SPHTerrain_WheeledVehicle, and demo_VEH_SPHTerrain_Viper.

[Added] TMSimple tire model

A new tire model (ChTMsimple) was added to Chrono::Vehicle. This tire model is of "force element" type and shares part of its formulation with the TMeasy model (both of these tire models were developed by Wolfgang Hirschberg from TU Graz in Austria). The goal of TMsimple is to provide a simple handling tire model with fewer parameters than TMeasy while still providing realistic (albeit reduced) functionality.

The TMsimple model

  • calculated horizontal patch forces based on single functions (whereas TMeasy requires three piece-wise definitions)
  • considers degressive influence of the vertical force Fz
  • calculates rolling resistance

TMeasy requires 5 parameters to define its basic function for Fx and Fy: (1) slope at zero, (2) slip at force maximum, (3) maximal force, (4) slip at sliding initiation, and (5) sliding force. In contrast, TMsimple needs only 3 parameters: (1) slope, (2) maximal force, and (3) force at infinite slip. A complete parameter set for Fx(sx,Fz) and Fy(sy,Fz) has 20 items for TMeasy and only 12 for TMsimple. Chrono's TMsimple implementation has a new stand-still/low speed algorithm for friction forces. It is not part of TMsimple itself, and could be adapted to other handling tire models as well.

[Added] Blender plug-in for post-process visualization

A new tool has been developed. It is an add-on for the Blender rendering/modeling/animation software, that allows importing Chrono simulation in the GUI of Blender. From the C++ side, the only requirement is using some export functions of the POSTPROCESS module. This aims at replacing the old POVray post-processing pipeline.

  • Interactive 3D navigation of the scenes, and timeline scrubbing.
  • Allows rendering of high-quality photo-realistic animations, using the Cycles physically-based unbiased path tracer that is available in Blender.
  • The user can optionally modify the Chrono assets, once imported, by attaching custom materials, special FXs, more detailed meshes, etc.
  • Visualization of auxiliary references (center of masses, link markers etc)
  • False color rendering of mesh attributes and glyph attributes, using colormaps
  • Speed optimizations for the ChParticleCloud shapes

Details on this new tool is available at the Chrono::Blender page on the ProjectChrono.org website.

[Added] VSG-based run-time visualization module

A new module (Chrono::VSG) was added to provide an alternative for run-time visualization. This module uses VulkanSceneGraph (VSG), a new cross-platform, high-performance scene graph library built upon the Vulkan graphics/compute API. Chrono::VSG implements most of the functionality expected by the base Chrono visual system; currently, missing support includes FEA and modal analysis visualizations (work in progress). Except for this, the ChVisualSystemVSG is interchangeable with ChVisualSystemIrrlicht with minor changes to user code. See for example the various Chrono MBS and vehicle demos that have been modified to work with either run-time visualization system.

Unlike Irrlicht, VulkanSceneGraph provides a modern scene graph library which is under active development. Besides the many features provided by the core VSG library, the GUI system provided by the companion vsgImGui project offers the full set of capabilities of ImGui. The basic UI elements already exposed in ChVisualSystemVSG and ChVehicleVisualSystemVSG will be further expanded.

Simultaneous with the introduction of Chrono::VSG, we have modified the ChVisualSystem API (and reflected these changes in both ChVisualSystemIrrlicht and ChVisualSystemVSG) to provided new capabilities, such as the definition and rendering of visual models that are not associated with a Chrono physics item.

[Changed] Support for linear and nonlinear vehicle force elements

The various pre-defined functors for use with TSDA and RSDA elements in vehicle models have been refactored for consistency. These include linear and nonlinear springs, dampers, and spring-damper force elements with optional bump stops (see the definitions in src/chrono_vehicle/ChSubsysDefs.h). In addition, a new TSDA functor, MapSpringDamper allows for the definition of a general non-linear spring-damper (depending on both deformation and velocity) specified through bi-linear interpolation of tabular data.

All the pre-defined TSDA and RSDA functors can be specified in JSON files; consult the various JSON files for wheeled vehicle suspension systems in the Chrono data directory.

Release 8.0.0 (2022-12-21)

[Added] Chrono::Sensor features and updates

Updates and Bug Fixes

  • Upgraded to OptiX 7.5, requiring NVIDIA drive 515.X or newer
  • Fixed motion blur for cameras
  • Improve consistency of FOV model for camera and segmentation camera
  • Fix undefined behavior associated with zero-time transforms on ampere GPUs
  • Changed the intensity-dependent noise model to be parameterized by variance variance rather than standard deviation to allow negative correlation

New Features

  • Added fog to camera. This uses an exponential blending function with scattering coefficient. Can be enabled on a per-camera basis in the camera constructed. Parameters for fog scattering, color, and max visible distance are set in ChScene: SetFogScattering(float coefficient), SetFogColor(ChVector<float> color) and SetFogScatteringFromDistance(float distance).
  • Added radial distortion model (standard model in Matlab). The input parameters are the correction parameters that can be calibrated from distorted images. The FOV lens model and radial model use the effective FOV parameter. Instead, they use the calibrated parameter as would be obtained by calibrating the focal distance.
  • Radial model set as: CameraLensModelType::RADIAL in the camera
  • Parameters configured as ChCameraSensor::SetRadialLensParameters(ChVector<float> params)
  • Allow Chrono::Sensor to be built when GLFW library and headers are not found

[Fixed] Closed-loop vehicle paths

The treatment of closed-loop Bezier curves (used for path-following vehicle lateral controllers) and the associated curve tracker was improved and fixed. With this change, the flag indicating whether a path is open or closed is set in the constructor of ChBezierCurve and encapsulating objects (ChBezierCurveTracker and the different path-following vehicle driver models) query the underlying path.

If a Bezier curve is declared as closed, it is internally modified to add a new point as needed (coincident with the first one). If no Bezier control points are specified, the Bezier curve corresponding to the equivalent piece-wise cubic spline is constructed using C1 continuity conditions at the closing point.

[Added] Miscellaneous Chrono::Vehicle extensions

Wheeled vehicles

  • Added option to specify camber and toe angles during suspension subsystem construction.

    A derived suspension class can override the functions getCamberAngle and getToeAngle to provide these angles expressed in radians). For a suspension subsystem specified through a JSON file, set the 'Camber Angle (deg)' and 'Toe Angle (deg)' values expressed in degrees. Note that all current Chrono::Vehicle models use default values of zero camber and toe angles.

  • Modified the JSON schema for various vehicle subsystem specification so that all angles that are expected to be provided in radians include the string "(deg)" in the corresponding JSON key name.

    Note: this change requires users to update their JSON specification files!

  • Added option to specify preloads for tracked vehicle suspensions, as well as for the tensioner in ChTranslationalIdler.

Tracked vehicles

  • Renamed the base class for a track vehicle suspension ChTrackSuspension. Two different suspension templates are provided: ChTranslationalDamperSuspension uses a translational damper, while ChRotationalDamperSuspension uses a rotational damper.

  • Use a single set of classes to define all tracked vehicle wheels (road-wheels, idler wheels, and rollers). Two types of track wheels are derived from the base class ChTrackWheel: the first one, ChDoubleTrackWheel assumes that track shoes have a central guiding pin, while the second one ChSingleTrackWheel works in conjunction with track shoes with lateral guiding pins. Track wheels are used as members of the ChTrackSuspension and ChIdler base classes.

    The ChRoller class was obsoleted since a roller can be modeled with one of the available track wheels.

  • Added a new type of idler mechanism, ChDistanceIdler which is modeled with a connector arm pinned to the chassis. The idler wheel is attached to the connector arm with a revolute joint. A translational actuator dictates the relative position of the connector arm relative to the chassis, specified by the length of the actuator.

    The previous type of idler template is now named ChTranslationalIdler.

  • Added option to specify preloads for tracked vehicle suspensions, as well as for the tensioner in ChTranslationalIdler.

  • Add alternative model for a double-pin track shoe which uses a single body to model the connectors between shoes. For track assemblies that use kinematic joints, this model provides the same track kinematics and dynamics with fewer bodies and joints and without additional complications due to redundant constraints. The previous model, using two distinct connector bodies between two consecutive shoes, is appropriate for the case where kinematic joints are replaced with bushings. The double-pin track shoe topology is specified during construction, using the enum DoublePinTrackShoeType which can be either TWO_CONNECTORS or ONE_CONNECTOR.

[Changed] Chrono::FSI API changes

The public API of Chrono::FSI was further refined to better encapsulate and hide the underlying CUDA implementation from the user.

  • Only two header files need to be included in most Chrono::FSI user programs: ChSystemFsi.h which contains the definition of the top-level FSI system class and ChDefinitionsFsi.h which defines various enumerations for problem settings and solution methods.
  • Optionally, the ChVisualizationFsi.h header can be included to allow access to OpenGL-based run-time visualization.
  • Simulation parameters (defining the problem and the solution method) can be still be set as before through a specification file in JSON format. However, each parameter can also be programmatically set through various Set*** methods of ChSystemFsi.
  • The order in which various parameters are set is now arbitrary. All dependent calculations are performed in the ChSystemFsi::Initialize() function which must be invoked once all setup is completed and before the start of the simulation loop.
  • The set of accessor Get*** functions of ChSystemFsi was enlarged to provide access to various simulation parameters (possibly defined in an input JSON file).
  • All public API functions in ChSystemFsi and ChVisualizationFsi only use C++ base types and Chrono types (such as ChVector<>, ChQuaternion<>, etc.)
  • The only disk output from the Chrono::FSI module is optionally enabled by calling ChSystemFsi::SetOutputDirectory(). It is the caller's responsibility to ensure that the specified directory exists. If Chrono::FSI output is enabled, various files with state and forces on rigid- and flex-body BCE markers are saved in an fsi/ subdirectory of the specified output directory.

The new optional run-time visualization support for Chrono::FSI simulation requires that the Chrono::OpenGL module is enabled and available. Visualization of SPH particles, boundary BCE markers, rigid-body BCE markers, and flex-body BCE markers can be enabled or disabled individually. SPH particles are rendered with a point cloud; boundary BCE markers are rendered as boxes (of size equal to the initial particle spacing); solid-body BCE markers are rendered as spheres (of diameter equal to the initial particle spacing). See the various Chrono FSI demos for usage. Note that enabling run-time visualization adds the additional cost of transferring marker positions every time the simulation is rendered.

[Added] User-defined SMC contact force calculation

A mechanism was added for overriding the default contact force calculation for a collision pair in an SMC system. The user must supply a class derived from ChSystemSMC::ChContactForceSMC and register it through a call to ChSystemSMC::SetContactForceAlgorithm.

The user is responsible to implement the virtual function

        virtual ChVector<> CalculateForce(
            const ChSystemSMC& sys,             ///< containing system
            const ChVector<>& normal_dir,       ///< normal contact direction (expressed in global frame)
            const ChVector<>& p1,               ///< most penetrated point on obj1 (expressed in global frame)
            const ChVector<>& p2,               ///< most penetrated point on obj2 (expressed in global frame)
            const ChVector<>& vel1,             ///< velocity of contact point on obj1 (expressed in global frame)
            const ChVector<>& vel2,             ///< velocity of contact point on obj2 (expressed in global frame)
            const ChMaterialCompositeSMC& mat,  ///< composite material for contact pair
            double delta,                       ///< overlap in normal direction
            double eff_radius,                  ///< effective radius of curvature at contact
            double mass1,                       ///< mass of obj1
            double mass2                        ///< mass of obj2
            ) const = 0;

which should return the contact force (resultant of the normal and tangential components) for an interaction between two penetrated shapes, given the geometric quantities for the collision.

The default implementation of the SMC contact force calculation is implemented in ChContactSMC.h and depends on various settings specified at the ChSystemSMC level (such as normal force model, tangential force model, use of material physical properties, etc).

For an example of overriding the default Chrono behavior, see demo_IRR_callbackSMC.cpp.

[Changed] Redesigned run-time visualization system

The entire mechanism for defining visualization models, shapes, and materials, as well as constructing and attaching a run-time visualization system to a Chrono system was redefined for more flexibility and to allow plugging in alternative rendering engines. The new class hierarchy allows sharing of visualization models among different physics items, visualization shapes among different models, and visualization materials among different shapes.

  • A visualization material (ChVisualMaterial) defines colors (diffuse, ambient, specular, and emissive), textures, and other related properties.
  • A visualization shape (ChVisualShape) is a geometric shape (primitive, curve, surface, or triangular mesh) with one or more associated visualization materials. If a shape has no associated material, a default material is used.
  • A visualization model (ChVisualModel) is an aggregate of (pointers to) shapes and a transform which specifies the shape position relative to the model reference frame. Visualization shapes in a model are maintained in a vector of ShapeInstance (which is simply a typedef for a pair containing a shared pointer to a ChVisualShape and a ChFrame). Note that, currently a visualization model instance cannot be placed inside another visualization model, but that may be added in the future.
  • A visualization model instance (ChVisualModelInstance) is a reference to a visualization model with an associated physics item. A physics item may have an associated visualization model instance.

ChVisualSystem defines a base class for possible concrete run-time visualization systems and imposes minimal common functionality. A ChSystem is attached to a visual system using ChVisualSystem::AttachSystem. The Chrono physics system will then trigger automatic updates to the visualization system as needed, depending on the particular type of analysis being conducted. The visualization system is set up in such a way that derived classes may allow simultaneous rendering of multiple Chrono systems; currently only ChVisualSystemOpenGL supports this feature.

Defining visualization models

The new mechanism for defining visualization shapes and materials for a Chrono physics item is illustrated in the following typical sequence:

    // Create a visual material and set properties
    auto vis_mat = chrono_types::make_shared<ChVisualMaterial>();
    vis_mat->SetDiffuseColor(ChColor(0.9f, 0.4f, 0.2f));
    // set other material properties
    
    // Create a visual shape and add one or more materials
    auto vis_sphere = chrono_types::make_shared<ChSphereShape>();
    sphere->GetSphereGeometry().rad = 0.5;
    sphere->AddMaterial(vis_mat);
    
    // Create a visual model and add one or more shapes
    auto vis_model = chrono_types::make_shared<ChVisualModel>();
    vis_model->AddShape(vis_sphere);
    // add more visual shapes to the model

    // Attach an instance of a visual model to a physics item
    body->AddVisualModel(vis_model);

Note that FEA visualization requires defining objects of type ChVisualShapeFEA. An FEA visualization shape is in fact a pair of two visual shapes, one for visualizing the FEA mesh, the other for visualizing so-called glyphs (e.g., representation of the FEA nodes).

For convenience, several shortcuts are provided:

  • the diffuse color or diffuse map texture can be set directly on a visual shape, using ChVisualShape::SetColor and ChVisualShape::SetTexture. If the shape has visual materials defined, these functions affect the 1st material in the list. Otherwise, a new material is created and associated with the given shape, and its properties set appropriately.
  • a visual shape instance can be added directly to a physics item, using ChPhysicsItem::AddVisualShape. If the physics item already has an associated visual model instance, the new shape is added to that model at the specified transform. Otherwise, a new visual model instance is created and associated with the physics item, and the given shape instance created within the model.
  • an individual visual shape in the visual model of a physics item can be accessed through its index with ChPhysicsItem::GetVisualShape. This can then be used to change shape parameters or parameters of the associated visual material.

Defining a visualization system

While specification of visualization assets (materials, shapes, and models) must now be done as described above for any Chrono run-time visualization system, the Chrono API does not impose how a particular rendering engine should interpret, parse, and render the visual representation of a Chrono system.
The suggested mechanism is to define a concrete visualization system (derived from ChVisualSystem) and attach it to the Chrono system. Currently, an Irrlicht-based and an OpenGL-based visualization systems are provided through ChVisualSystemIrrlicht and ChVisualSystemOpenGL, respectively. These object replace the now obsolete ChIrrApp and ChOpenGLWindow.

A typical sequence for creating and attaching an Irrlicht-based visualization system to a Chrono simulation is illustrated below:

    ChVisualSystemIrrlicht vis;
    vis.SetWindowSize(800, 600);
    vis.SetWindowTitle("Chrono::Irrlicht visualization");
    vis.Initialize();
    vis.AddLogo();
    vis.AddSkyBox();
    vis.AddCamera(ChVector<>(1, 2, 3));
    vis.AddTypicalLights();
    vis.AttachSystem(&sys);

Notes:

  • Various parameters (such as windows size, windows title, camera vertical direction) can be set with various Set*** methods. These must be called before the visual system is initialized with ChVisualSystemIrrlicht::Initialize().
  • After the call to Initialize, additional rendering elements (such as lights, a sky box, a camera) can be added to the visualization system with various Add*** methods.
  • Once the visual system is initialized and attached to the Chrono system, all currently defined visual models are processed and Irrlicht nodes created.
  • If visual models are created at a later time, these must be converted to Irrlicht nodes through a call to ChVisualSystemIrrlicht::BindAll() (to process all visual models in the Chrono system) or to ChVisualSystemIrrlicht::BindItem (to process the visual model for the specified Chrono physics item).

Additional rendering options can be enabled with calls to Enable*** methods which must be made only after the visualization system was initialized and attached to a Chrono system. These options include enabling various ways of rendering collision and contact information and body or link reference frames.

A typical simulation loop with Irrlicht-based run-time visualization has the form:

    while (vis.Run()) {
        vis.BeginScene();
        vis.Render();
        // make additional Irrlicht-based rendering calls, for example to display a grid:
        irrlicht::tools::drawGrid(vis, 0.5, 0.5, 12, 12,
                                  ChCoordsys<>(ChVector<>(0, -0.5, 0), Q_from_AngX(CH_C_PI_2)),
                                  ChColor(80, 110, 110), true);
        vis.EndScene();
        sys.DoStepDynamics(step_size);
    }

The Irrlicht visualization system also provides a GUI (displayed using the i key during simulation) which allows changing rendering options at run-time.

See the various Chrono demos (in src/demos/irrlicht/) for different ways of using the new visualization system mechanism in Chrono.

The OpenGL-based visualization system can be used effectively in the same way as ChVisualSystemIrrlicht.

Finally, note that all functions in the public API were changed to use only Chrono data types. In other words, user code need not use types from the Irrlicht or OpenGL namespaces.

Vehicle-specific visualization system

While a Chrono::Vehicle simulation can be rendered like any other Chrono system simulation (using either ChVisualSystemIrrlicht or ChVisualSystemOpenGL), customized derived classes are provided for Irrlicht-based rendering. These classes provide additional rendering options specific to vehicle systems, including vehicle state information overlay text. Use ChWheeledVehicleVisualSystemIrrlicht for wheeled vehicles and ChTrackedVehicleVisualSystemIrrlicht for tracked vehicles.

To enable the vehicle-specific features, attach the vehicle system to the visualization system, using ChVehicleVisualSystem::AttachVehicle.

See demos under src/demos/vehicle/.

[Changed] Vehicle inertia properties

The underlying mechanism for setting and querying inertia properties (mass, COM location, and inertia matrix) for vehicle systems and subsystems was redesign for consistency. At the user API level, this change is reflected through a uniform manner to hoe these quantities are reported.

Any vehicle subsystem (of type ChPart), as well as any vehicle system (ChWheeledVehicle or ChTrackedVehicle) provide the following set of accessor methods:

  • GetMass() returns the mass of the (sub)system. In the case of a vehicle, this includes the mass of all vehicle subsystems. Furthermore, the mass of a wheeled vehicle includes the mass of the tires.
  • GetCOMFrame() returns the current COM (centroidal) frame. This frame is relative to and expressed in the reference frame of the part or of the vehicle.
  • GetInertia() returns the current inertia matrix (that is the articulated inertia). The reported inertia matrix is given with respect to the centroidal frame of the part or vehicle.

In addition, a ChPart or ChVehicle also provide a method GetTransform() which returns the vehicle transform (translation and orientation encapsulated in a ChFrame) relative to the global (absolute) frame. Recall that, by convention, the vehicle reference frame is that of its main chassis.

[Changed] CMake project configuration script

The CMake script ChronoConfig.cmake, generated automatically during Chrono CMake configuration and used in configuring third-party applications that depend on Chrono (via calls to find_project(Chrono ...)) was modified to produce the compiler and linker flags in CMake list variables (as opposed to space-separated strings as before). The variables affected by this change are CHRONO_CXX_FLAGS, CHRONO_C_FLAGS, and CHRONO_LINKER_FLAGS.

This allows use of modern CMake in the configuration scripts for such an external project. See the example in the template_project/ directory in the Chrono distribution:

target_compile_definitions(myexe PUBLIC "CHRONO_DATA_DIR=\"${CHRONO_DATA_DIR}\"") 
target_compile_options(myexe PUBLIC ${CHRONO_CXX_FLAGS})
target_link_options(myexe PUBLIC ${CHRONO_LINKER_FLAGS})

[Changed] Right-handed frames in Chrono::Irrlicht

The Irrlicht library, wrapped in the Chrono::Irrlicht run-time visualization library uses the DirectX convention of left-handed frames. This has been a long standing source of confusion for all Chrono users since Chrono simulations (always conducted using right-handed frames) were "mirrored" during rendering.

This set of changes forces Chrono::Irrlicht to use right-hand projection matrices resulting in renderings that are consistent with the underlying models and simulations. All changes are internal and transparent to the user.

We took this opportunity to make a small set of minor API changes, most of them simple function renames:

  • ChIrrApp::AddTypicalLogo() was renamed to ChIrrApp::AddLogo().
  • ChIrrApp::AddTypicalCamera() was renamed to ChIrrApp::AddCamera().
  • ChIrrApp::AddTypicalSky() was renamed to ChIrrApp::AddSkyBox().
  • ChIrrApp::AddTypicalLights() was changed to always construct two point lights with default settings (positions, radii, and colors). The positions of these lights are different for a Y or Z camera vertical direction. A user interested in changing the settings of the default lights should use the function ChIrrApp::AddLight() which allows specifying position, radius, and color.
  • ChVehicleIrrApp::SetSkyBox() was obsoleted (the Chrono sky box is automatically added).

[Added] Modal analysis module

A new module MODULE_MODAL has been added. The module uses an external dependency (the Spectra library for eigenvalue computation). Follow the Chrono::Modal installation guide for instructions on how to enable it.

The new class ChModalAssembly offer three main functionalities:

  • undamped modal analysis of all the system being created within the sub assembly will be obtained. The modes and frequencies can be also displayed interactively if using the Irrlicht visualization system.

    • The sub-assembly can also contain constraints between its sub parts.
    • Rigid modes (for free-free structures) are supported
    • A custom generalized, sparse, constrained eigenvalue solver of Krylov-Schur type allows the computation of only the n lower modes. This allows handling large FEA systems.

  • damped (complex) modal analysis of the subsystem: this is like the previous case, but damping matrix is used too, hence obtaining complex eigenvalues/eigenvectors. Damping factors for the modes are output too, indicating stability or instability. NOTE: while we wait that Spectra will enable complex eigenvalues in Krylov-Schur, a more conventional solver is used, that is not sparse - hence requiring more time and memory

  • modal reduction of the sub-assembly. Example of a scenario where this is useful: you have a tower modeled with thousands of finite elements, but you are just interested in the small oscillations of its tip, because you will mount a windmill on its tip. If you simulate thousands of finite elements just for this purpose, you waste CPU time, hence a modal reduction of the tower will discard all the DOFs of the finite elements and represent the overall behavior of the tower using just few modal shapes (ex. fore aft bending, lateral bending, etc.), with extreme CPU performance at the cost of a small reduction of fidelity.

    • Bodies and FEA nodes can be added to the sub-assembly as internal or boundary interface nodes. Later one can call ChModalAssembly::SwitchModalReductionON(int n_modes) to replace the complexity of the internal nodes with few n_modes modal coordinates.
    • Boundary interface nodes can be connected to the rest of the multibody system as usual, using constraints, forces, etc.
    • Internal constraints can be used between internal nodes. Their effect too will be condensed in the modal reduction.
    • NOTE: at the moment only linear dynamics is supported for the sub-assembly, in the sense that the sub-assembly cannot withstand large rotations, ex. in a helicopter blade. Future developments will address this

[Added] Callback mechanism for collision debug visualization

A formal callback mechanism was added to ChCollisionSystem which allows user-controlled visualization of collision detection information for debug purposes. This mechanism allows overlaying collision detection debug information (wireframe rendering of the collision shapes, axis-aligned bounding boxes, contact points and normals) using any visualization system. The only requirement for this capability is the ability of rendering lines between two given 3D points (expressed in the absolute coordinate system).

To use this capability, users must implement a custom callback class derived from ChCollisionSystem::VisualizationCallback and override the DrawLine method to render a line in 3D using their visualization system of choice. This callback object is attached to the Chrono system using ChCollisionSystem::RegisterVisualizationCallback and rendering of collision information is triggered by calling ChCollisionSystem::Visualize from within the simulation loop. The type of information that will be rendered is controlled by an integer flag argument to Visualize which can be any of the enum ChCollisionSystem::VisualizationModes or a combination of these (using bit-wise or).

For example:

class MyDrawer : public ChCollisionSystem::VisualizationCallback {
public:
  MyDrawer() {...}
  virtual void DrawLine(...) override {...}
};

ChSystemNSC sys;
...
auto drawer = chrono_types::make_shared<MyDrawer>();
sys.GetCollisionSystem()->RegisterVisualizationCallback(drawer);
...
while (...) {
  ...
  sys.GetCollisionSystem()->Visualize(ChCollisionSystem::VIS_Shapes | ChCollisionSystem::VIS_Aabb);
}

A demonstration of this capability, with either the Bullet-based or the parallel Chrono collision system, is given in demo_IRR_visualize_collision. The custom collision visualization callback class in this demo uses Irrlicht for rendering lines.

[Changed] Translational and rotational spring-damper-actuators

  • The classes ChLinkSpring and ChLinkSpringCB were obsoleted, with their functionality superseded by ChLinkTSDA.
  • For consistency, the class ChLinkRotSpringCB was renamed to ChLinkRSDA.

Both ChLinkTSDA and ChLinkRSDA default to a linear spring-damper model, but an arbitrary user-defined spring-damper-actuation force can be implemented through functor classes (ChLinkTSDA::ForceFunctor and ChLinkRSDA::TorqueFunctor, respectively). When using the PyChrono python wrappers, these functor classes are named ForceFunctor and TorqueFunctor. When using the C# wrappers, these functor classes are inherited as outside classes named TSDAForceFunctor and RSDATorqueFunctor, respectively.

ChLinkRSDA

  • ChLinkRSDA is now derived directly from ChLink and properly accounts for possible full revolutions.
  • A rotational spring is initialized by specifying the two connected bodies and the RSDA frames on each of them. It is assumed that the mechanism kinematics are such that the two RSDA frames maintain their Z axes parallel at all times.
  • The angle is measured starting from the X axis of the RSDA frame on the first body towards the X axis of the RSDA frame on the second body and its sign is dictated by the right-hand rule.
  • Unless SetRestAngle is explicitly called, the spring rest (free) angle is inferred from the initial configuration.
  • The signature of the virtual method ChLinkRSDA::TorqueFunctor::evaluate was changed to take a const reference to the RSDA element as its last argument.
  • A new visual asset (ChRotSpringShape) was added for run-time visualization of a rotational spring.

ChLinkTSDA

  • For consistency, the mechanism for specifying the spring rest (free) length was changed: unless SetRestLength is explicitly called, the spring rest (free) angle is inferred from the initial configuration.
  • The signature of the virtual method ChLinkTSDA::ForceFunctor::evaluate was changed to take a const reference to the TSDA element as its last argument.

[Changed] Refactor Chrono::Vehicle suspension test rigs

The wheeled vehicle suspension test rig (STR) was modified to accept an arbitrary number of tested axles from any given vehicle.

The new STR will create posts / pushrods for all spindles (left and right) from all axles specified as "test axles". Like before, one can construct an STR from a given vehicle (from one of the models in the Chrono vehicle models library or else created from a JSON specification file) or else from a JSON specification file for an STR. However, the latter approach will now construct the entire vehicle (specified though a vehicle JSON file) but include only a user-specified subset of its axles for testing. Note that this is not a limitation because Chrono::Vehicle was also modified to allow specification in a JSON file of a stripped-down vehicle model which need not include a driveline nor a steering mechanism and may even define a single axle.

Additional vehicle subsystems (such as steering mechanisms or sub-chassis components) can be adding to either type of STR (ChSuspensionTestRigPlatform or ChSuspensionTestRigPushrod) using the functions IncludeSteeringMechanism and IncludeSubchassis. This simply means that: (i) run-time visualization of the additional subsystem can be enabled and (ii) the additional subsystem is included in the rig output (if that is enabled). The associated vehicle is initialized with its chassis fixed and its driveline automatically disconnected. Simulation of the test rig (through the function ChSuspensionTestRig::Advance) performs a simulation of the entire vehicle with all its components, but vehicle subsystems not explicitly included in testing are invisible and do not participate in any output.

See demo_VEH_SuspensionTestRig for various examples and options, and look at the JSON files used in that demo for changes in their formats.

Note also that the format for a data file with STR actuation information (used by a ChDataDriverSTR) was modified by moving the steering input in the 2nd column. In other words, each line of this ASCII file should now contain:
time steering_input left_post_0 right_post_0 left_post_1 right_post_1 …

Release 7.0.3 (2022-04-17)

[Fixed]

  • SIMD detection is combined into one CMake script
  • Fixed SIMD feature detection with Clang, allowing support for Apple-M1 and generic AArch64 CPUs

Release 7.0.2 (2022-04-03)

[Fixed]

  • Fixed bug in ANCF shells 3443 and 3883 where the incorrect Gauss quadrature weights and Jacobian elements were used when multiple layers of different sizes are defined
  • Fixed bug where the active flag for a sub-block of DOFs for a ChBody was incorrectly set
  • Updates to the continuous integration scripts

Release 7.0.1 (2022-01-07)

[Fixed]

  • Fixed Chrono::Sensor class export (Windows)
  • Fixed bug in ChPovRay related to processing of OBJ files
  • Fixed demo program in sample project for vehicle co-simulation
  • Fixed setting of MPI linker flags in CMake project configuration script

Release 7.0.0 (2021-11-15)

[Added] DDS communicator in Chrono::Synchrono module

Chrono::SynChrono used to rely only on MPI to pass message between ranks. We added a different SynCommunicator derived class called SynDDSCommunicator. This communicator relies on e-Prosima implementation of DDS, called fastDDS and it is alternative to MPI communication. Please note that while DDS implementations are interoperable, they are not compatible at the implementation level, therefore to use this functionality please download or clone and build fastDDS and follow the instructions on our website. The main purpose of SynChrono-DDS is to perform distributed simulation across different machines, hence overcoming MPI limitations: as long as two machines can establish a UDP/TCP communication they can participate in a distributed SynChrono-DDS communication.

  • From the user API perspective, the change is minimal: for example, in demo_SYN_DDS_wheeled.cpp the only change is the communicator itself, after including the proper header: 
    #include "chrono_synchrono/communication/dds/SynDDSCommunicator.h"
.....
auto communicator = chrono_types::make_shared<SynDDSCommunicator>(node_id);
  • Launching the jobs: instead of using mpiexec/mpirun, DDS ranks are started separately (either manually or through a job scheduler). DDS implements a Barrier such that jobs freeze until the expected number of participant is found. This means that jobs can be launched even minutes apart and they will simply wait for each other before stepping forward together.
  • UDP communication: the most useful application of SynChronoDDS is using it across UDP, to perform distributed simulation without MPI boundaries. It is sufficient to provide the IP address of the machines to connect with to set up communication (given that the Firewall is not preventing it) as in demo_SYN_DDS_distributed.cpp:
qos.transport().user_transports.push_back(std::make_shared<UDPv4TransportDescriptor>());
qos.transport().use_builtin_transports = false;
qos.wire_protocol().builtin.avoid_builtin_multicast = false;
// Set the initialPeersList
for (const auto& ip : ip_list) {
   Locator_t locator;
   locator.kind = LOCATOR_KIND_UDPv4;
   IPLocator::setIPv4(locator, ip);
   qos.wire_protocol().builtin.initialPeersList.push_back(locator);
}
auto communicator = chrono_types::make_shared<SynDDSCommunicator>(qos);

[Added] New terramechanics co-simulation module

This new module provides support for co-simulating various Chrono models of ground wheeled vehicles. This framework implements an explicit co-simulation model (of force-displacement type) and uses an MPI layer for exchanging data between the participant nodes.

The co-simulation framework was designed to support:

  • any of the terramechanics simulation capabilities in Chrono (rigid terrain; deformable SCM; granular terrain with Chrono::Multicore, Chrono::Gpu, or Chrono::Distributed; continuous granular terrain representation with Chrono::Fsi);
  • external, third-party terramechanics simulation packages (regardless of implementation and/or parallel programing paradigm);
  • terramechanics packages that do not advance themselves the dynamics of the tires (if any) or else treat both tire and terrain simulation;
  • rigid or flexible tires (the latter assumed to rely on the Chrono FEA simulation capabilities);
  • a variety of Chrono wheeled vehicle models (including any Chrono::Vehicle wheeled model, as well as single-wheel test rigs, or wheeled rover models such as the Curiosity and Viper).

The new module is build automatically if MPI is found and available and if the Chrono::Vehicle module is enabled (at CMake configuration time). Support for different terramechanics models is enabled within the module if the corresponding Chrono module is enabled (note that each of the following Chrono modules has its own additional dependencies):

  • Chrono::Multicore for granular multi-core simulation (OpenMP-based)
  • Chrono::Gpu for granular GPU simulation (CUDA-based)
  • Chrono::Distributed for granular distributed simulation (MPI-based)
  • Chrono::FSI for continuous granular terrain representation (CUDA-based)

Terrain simulation is conducted on one or more Terrain nodes (MPI ranks). If the terramechanics simulation is itself using MPI, support is provided to generate and provide an MPI sub-communicator consisting of all Terrain ranks; only the main Terrain rank (rank 0 in the sub-communicator) participates in the co-simulation communication.

Several types of MBS nodes are provided, representing different wheeled mechanisms and vehicles:

  • ChVehicleCosimRigNode wraps a model of a single-wheel test rig;
  • ChVehicleCosimVehicleNode wraps a Chrono::Vehicle ground wheeled vehicle model (with arbitrary number of wheels);
  • ChVehicleCosimCuriosityNode wraps the Curiosity Mars rover available in the Chrono robot models library;
  • ChVehicleCosimViperNode wraps the Viper lunar rover available in the Chrono robot models library;

Three different types of Tire nodes are provided to intermediate simulation and data-exchanged between the MBS node and the main Terrain node:

  • ChVehicleCosimTireNodeRigid is a simple conduit between the MBS node and the Terrain node; it does not perform any dynamics of its own, but does maintain a physical representation of the associated tire for simulation and visualization output purposes;
  • ChVehicleCosimTireNodeFlexible wraps a deformable tire modeled with Chrono::FEA elements; this node performs its own dynamics (accelerated by the use of OpenMP parallel loops in Chrono::FEA);
  • ChVehicleCosimTireNodeBypass provides a pure short-circuit between the MBS and Terrain nodes and is intended for coupling to terramechanics external packages which simulate simultaneously the tire, the terrain, and the tire-terrain interaction.

The architecture of the framework thus implements a "three way" co-simulation setup. The data exchange between the three different node types is as follows:

  • the MBS node sends spindle body states to the appropriate Tire nodes; a Tire node sends terrain forces and moments acting on the spindle body to the MBS node;
  • a Tire node sends tire body state (for a rigid tire) or tire FEA mesh state (for a flexible tire) to the Terrain node; the (main) Terrain node send terrain force on the spindle (rigid tire) body or nodal terrain forces (for a flexible tire) to the appropriate Tire node.

The co-simulation framework also provides the ability to attach a drawbar pull rig mechanism to any of the supported MBS nodes. Two variants are provided:

  • ChVehicleCosimDBPRigImposedSlip allows imposing known (fixed) vehicle forward linear velocity and wheel angular velocity to maintain a prescribed value of the longitudinal slip. The actuation specifies if the linear velocity or angular velocity is considered as "base velocity", with the other one derived from the slip value. The DBP force is extracted as the reaction force required to enforce the vehicle forward linear velocity (at steady state). Each run of this experiment produces one point on the slip-DBP curve.
  • ChVehicleCosimDBPRigImposedAngVel enforces a prescribed wheel angular velocity. A linearly increasing resistive force is applied against the forward motion of the vehicle and the experiment is ended when the vehicle stops. At each time, the vehicle forward speed and resulting slip are calculated and stored together with the current resistive force (DBP). This experiment produces the entire slip-DBP curve at once.

Output feature include:

  • Run-time visualization. Available if the Chrono::OpenGL module is enabled, this option permits run-time visualization from the Terrain node. The only exception is the SCM deformable terrain node which uses Chrono::Irrlicht (if available)
  • Simulation output. A variety of output files are created from each type of co-simulation node, as well as from the drawbar-pull rig (if one is present). These include both files with information from all time steps and individual frame files created at each output step.
  • Off-line visualization. If desired, the user can invoke functions to generate post-processing visualization output. The visualization output files (where possible) are meant to be used with the new Blender-based python scripts available in Chrono and allow rendering in a single scene the visualization assets from all co-simulation nodes.

The design of the co-simulation framework is such that all inter-node co-simulation communication is transparent to the user. User code need only instantiate the appropriate number of co-simulation nodes of the appropriate type (MBS, Tire, or Terrain), select simulation options, and make calls to advance the state of the coupled system from step to step. At a minimum, the main user simulation loop must call Synchronize followed by Advance for all co-simulation nodes; optional calls may be made to functions controlling simulation and off-line visualization output. A set of demo programs (named demo_VEH_Cosim***) are provided to illustrate the use of the co-simulation framework with different multibody systems and terrain models.

[Changed] Chrono::Fsi API redesign

For consistency with the main Chrono module and other optional Chrono modules, the Chrono::FSI API was changed as follows:

  • The user's interaction with the Chrono::FSI module was streamlined by exposing in the public API a single Chrono::FSI system object (of type ChSystemFsi ) and hiding the underlying implementation in a private class.
  • User code only needs to include one Chrono::FSI header in their project, namely chrono_fsi/ChSystemFsi.h and need not include any of the utility header files from utils/.
  • Users can use standard C++ types to declare a scalar, and use Chrono types (ChVector, ChQuaternion, etc) to declare vectors, quaternions, etc.
  • The initialization of the parameters from a JSON file was changed from fsi::utils::ParseJSON() to myFsiSystem.SetSimParameter(), assuming the user has created an FSI system myFsiSystem.
  • A new function was added to set periodic boundary condition: ChSystemFsi::SetBoundaries().
  • The function used to finalize the subdomains was changed from fsi::utils::FinalizeDomain() to ChSystemFsi::SetSubDomain().
  • The function used to set the output directory was changed from utils::PrepareOutputDir() to ChSystemFsi::SetFsiOutputDir().
  • The function used to add SPH particles was changed from myFsiSystem.GetDataManager()->AddSphMarker() to ChSystem::AddSphMarker().
  • The functions used to add BCE particles were changed along the same lines; for instance, to add BCE particles for a cylinder, use ChSystemFsi::AddBceCylinder().
  • The function used to output data was changed from fsi::utils::PrintToFile() to ChSystemFsi::PrintParticleToFile().

See the updated FSI demo programs for usage of the new Chrono::FSI API.

Added - Option to build Chrono::FSI in single precision

  • Users can optionally configure Chrono::FSI in single precision by unsetting the CMake variable USE_FSI_DOUBLE
  • By default, Chrono::FSI is configured and built in double precision
  • Users should be careful opting for single precision as this can adversely impact simulation results

[Changed] Sensor to improve performance and added features

Changed - Optix 7.2 as Dependency:

  • Upgraded to Optix 7.2 from 6.5. 7.2 (exactly) is the only version supported.

Changed - Refactored sensor code:

  • sensors have been moved to src/chrono_sensor/sensors/ to cleanup directory structure
  • all OptiX-dependent code was moved to src/chrono_sensor/optix to consolidate the dependency

Changed - IMU to accelerometer and gyroscope:

  • Split the IMU sensor into its components (ChAccelerometerSensor and ChGyroscopeSensor) to facilitate additional sensors. Using both sensors together with same update rate will produce the same behavior as the original IMU. These sensors are still maintained under ChIMUSensor.h and ChIMUSensor.cpp
ChAccelerometerSensor(std::shared_ptr<chrono::ChBody> parent, float updateRate, chrono::ChFrame<double> offsetPose, std::shared_ptr<ChNoiseModel> noise_model);

ChGyroscopeSensor(std::shared_ptr<chrono::ChBody> parent, float updateRate, chrono::ChFrame<double> offsetPose, std::shared_ptr<ChNoiseModel> noise_model);

Added - Magnetometer:

  • Added magnetometer sensor alongside accelerometer and gyroscope. Sensor is maintained in ChIMUSensor.h and ChIMUSensor.cpp.
  • Returns a magnetic field strength vector based on the orientation of the sensor, and the GPS location of the sensor and simulation.
  • Can be permuted with noise using same noise models available for accelerometer and gyroscope.
ChMagnetometerSensor(std::shared_ptr<chrono::ChBody> parent, float updateRate, chrono::ChFrame<double> offsetPose, std::shared_ptr<ChNoiseModel> noise_model, ChVector<double> gps_reference);

Removed - Keyframe user configuration:

  • Removed the need for users to set the number of keyframes used for motion blur. Will now automatically find these internally.

Changed - Scene API:

  • Point lights can be created then added to the scene rather than adding directly though a function call
  • Point lights must be modified based on index rather than reference: void ChScene::ModifyPointLight(unsigned int id, PointLight p)
  • Background is created by the user and passed to the scene via the sensor manager void ChScene::SetBackground(Background b)
  • Ambient light is now configurable by the user through the scene void ChScene::SetAmbientLight(ChVector<float> color)
  • The ray tracing epsilon used to prevent self-intersections is configurable in the scene to allow the user to adjust the parameter when artifacts are present. void ChScene::SetSceneEpsilon(float e)

Added - Gradient background:

  • Can add gradient colors for sky alongside solid color or sky map.
enum class BackgroundMode {
    SOLID_COLOR,     ///< single solid color defined by RGB
    GRADIENT,        ///< color gradient used for upper hemisphere
    ENVIRONMENT_MAP  ///< image used for spherical sky map
};

Changed - ChOptixEngine to hide optix-dependent code:

  • ChOptixEngine no longer supports returning the optix context to the user.

Changed - Automatic mesh and object instancing:

  • Objects that use the same mesh will automatically instance the mesh (instanced if using same chrono::geometry::ChTriangleMeshConnected)
  • Removed the ability to add instanced objects explicitly.
  • Recommended instancing is to create single ChTriangleMeshConnected, then adding that with many scales (using ChTriangleMeshShape) and positions (using ChBody).

Changed - Shaders for visualization:

  • Improved the material shaders to support physically-based materials and Phong materials in the same scene.
  • Shading calls do NOT change API, but WILL be visible on objects.
  • Expanded parameters contained in chrono::ChVisualMaterial to include metallic, roughness, and other textures as well as whether to use a specular or metalic workflow. Will be detected for meshes loaded from file.

Added - Global Illumination with OptiX Denoiser: Added option for cameras to use global illumination with a denoiser to reduce stochastic noise imparted by the ray tracing algorithm.

  • enable global illumination and gamma correction exponent in camera constructor:
 ChCameraSensor(std::shared_ptr<chrono::ChBody> parent, // object to which the sensor is attached
               float updateRate,                        // rate at which the sensor updates
               chrono::ChFrame<double> offsetPose,      // position of sensor relative to parent
               unsigned int w,                          // image width
               unsigned int h,                          // image height
               float hFOV,                              // horizontal field of view
               unsigned int supersample_factor = 1,     // supersample diameter
               CameraLensModelType lens_model = CameraLensModelType::PINHOLE, //lens model
               bool use_gi = false,  // global illumination enable/disable
               float gamma = 2.2);   // gamma correction exponent
  • denoiser will automatically be used internally

Changed - Lidar sensor beam divergence

  • beam divergence can be configured by beam shape (rectangular or elliptical)
enum class LidarBeamShape {
  RECTANGULAR,  ///< rectangular beam (inclusive of square beam)
  ELLIPTICAL    ///< elliptical beam (inclusive of circular beam)
};
  • vertical and horizontal divergence angles independently parameterized
  • Dual return mode added
enum class LidarReturnMode {
  STRONGEST_RETURN,  ///< range at peak intensity
  MEAN_RETURN,       ///< average beam range
  FIRST_RETURN,      ///< shortest beam range
  LAST_RETURN,       ///< longest beam range
  DUAL_RETURN        ///< first and strongest returns
};
ChLidarSensor(std::shared_ptr<chrono::ChBody> parent,
              float updateRate,
              chrono::ChFrame<double> offsetPose,
              unsigned int w,
              unsigned int h,
              float hfov,
              float max_vertical_angle,
              float min_vertical_angle,
              float max_distance,
              LidarBeamShape beam_shape = LidarBeamShape::RECTANGULAR,
              unsigned int sample_radius = 1,
              float vert_divergence_angle = .003f,
              float hori_divergence_angle = .003f,
              LidarReturnMode return_mode = LidarReturnMode::MEAN_RETURN,
              float clip_near = 1e-3f);

Added - Radar sensor:

  • A radar sensor was added, with the initial version similar to lidar. Will return set of points that include range, azimuth, elevation, doppler velocity, amplitude of detection, and object id used for clustering
  • radar is configurable based on update rate, position, vertical and horizontal resolutions, vertical and horizontal field of view, and maximum distance.
ChRadarSensor(std::shared_ptr<chrono::ChBody> parent,
              const float updateRate,
              chrono::ChFrame<double> offsetPose,
              const unsigned int w,
              const unsigned int h,
              const float hfov,
              const float vfov,
              const float max_distance,
              const float clip_near = 1e-3f);

Added - Segmentation camera:

  • Added a segmentation camera ChSegmentationCamera which returns an image with class ID and instance ID for each pixel in the image.
  • If paired with an RGB camera at same frequency, position, fiew of view, and resolution, can be used to generate automatically segmented images
  • Instance ID and class ID are set in the material, defaulting to 0. See demo_SEN_camera and chrono::ChVisualMaterial for details on configuration.
ChSegmentationCamera(std::shared_ptr<chrono::ChBody> parent,  // object to which the sensor is attached
                      float updateRate,                       // rate at which the sensor updates
                      chrono::ChFrame<double> offsetPose,     // position of sensor relative to parent
                      unsigned int w,                         // image width
                      unsigned int h,                         // image height
                      float hFOV,                             // horizontal field of view
                      CameraLensModelType lens_model = CameraLensModelType::PINHOLE);  // lens model type

[Changed] ANCF element improvements and additions

Changed - Element Naming Convention:

The following ANCF elements have been renamed according to the 4-digit ANCF naming convention from: Dmitrochenko, O., Mikkola, A.: Digital nomenclature code for topology and kinematics of finite elements based on the absolute nodal co-ordinate formulation. Proc. Inst. Mech. Eng., Part K: J. Multi-Body Dyn. 225(1), 34–51 (2011)

  • ChElementBeamANCF renamed to ChElementBeamANCF_3333
  • ChElementShellANCF renamed to ChElementShellANCF_3423
  • ChElementShellANCF_8 renamed to ChElementShellANCF_3833
  • ChElementBrick renamed to ChElementHexaANCF_3813
  • ChElementBrick_9 renamed to ChElementHexaANCF_3813_9

The following elements were renamed to improve naming consistency:

  • ChElementHexa_8 renamed to ChElementHexaCorot_8
  • ChElementHexa_20 renamed to ChElementHexaCorot_20
  • ChElementTetra_4 renamed to ChElementTetraCorot_4
  • ChElementTetra_10 renamed to ChElementTetraCorot_10

Added - New ANCF Elements:

  • ChElementBeamANCF_3243 a fully parameterized 2-Node ANCF beam element
    • 24 DOF per element
    • Uses the enhanced continuum mechanics method to reduce locking (the same method as ChElementBeamANCF_3333)
    • Only rectangular cross sections are currently supported
    • Only linear viscoelastic materials are supported at this time (single coefficient damping model)
  • ChElementShellANCF_3443 a fully parameterized 4-Node ANCF shell element
    • 48 DOF per element
    • Prone to locking, no modifications to reduce locking are included at this time
    • Supports multiple discrete layers in a single shell element like ChElementShellANCF_3833
    • Only linear viscoelastic materials are supported at this time (single coefficient damping model)
  • ChElementHexaANCF_3843 a fully parameterized 4-Node ANCF brick element
    • 96 DOF per element
    • No modifications to reduce locking are included at this time
    • Only linear viscoelastic materials are supported at this time (single coefficient damping model)

Changed - Internal Force Calculation Method:

Applies to: ChElementBeamANCF_3243, ChElementBeamANCF_3333, ChElementShellANCF_3443, ChElementShellANCF_3833, and ChElementHexaANCF_3843

For these 5 elements, there is an option for two different generalized internal force calculation methods:

  • IntFrcMethod::ContInt (Default): The "Continuous Integration" method efficiently integrates across the volume of the element every time the generalized internal force or its Jacobian is calculated. This method is dependent on the number of Gauss quadrature points used for the integration, resulting in increased generalized internal force and Jacobian calculation times as additional layers are added to the shell elements. Even so, this method will typically be faster, and it has a significantly lower memory storage overhead. This method is a modification and extension to the method found in: Gerstmayr, J., Shabana, A.A.: Efficient integration of the elastic forces and thin three-dimensional beam elements in the absolute nodal coordinate formulation. In: Proceedings of the Multibody Dynamics Eccomas thematic Conference, Madrid(2005).
  • IntFrcMethod::PreInt: The "Pre-Integration" method is designed so that integration across the volume of the element occurs only once prior to the start of the simulation. This method is independent on the number of Gauss quadrature points used for the integration, resulting in no change in in-simulation generalized internal force and Jacobian calculation times as additional layers are added to the shell elements. This method is generally slower and has a significantly higher memory storage overhead, especially as the degree of freedom count for the element increases. This method is a modification and extension to the method found in: Liu, Cheng, Qiang Tian, and Haiyan Hu. "Dynamics of a large scale rigid–flexible multibody system composed of composite laminated plates." Multibody System Dynamics 26, no. 3 (2011): 283-305.

If possible, the calculation method should be set prior to the start of the simulation so that the precalculation phase is not called for both calculation methods resulting in unnecessary calculation and memory overhead.

A report covering the detailed mathematics and implementation both of these generalized internal force calculations and their Jacobians can be found in: Taylor, M., Serban, R., and Negrut, D.: Technical Report TR-2020-09 Efficient CPU Based Calculations of the Generalized Internal Forces and Jacobian of the Generalized Internal Forces for ANCF Continuum Mechanics Elements with Linear Viscoelastic Materials, Simulation Based Engineering Lab, University of Wisconsin-Madison; 2021.

These calculation methods make heavy use of the Eigen3 library. For MSVC 2017 and to a lesser extent MSVC 2019, this can result in significantly longer compile times. This is a known issue with Eigen3 and MSVC: https://gitlab.com/libeigen/eigen/-/issues/1725.

Changed - Obtaining Stress and Strain:

Applies to: ChElementBeamANCF_3243, ChElementBeamANCF_3333, ChElementShellANCF_3443, ChElementShellANCF_3833, and ChElementHexaANCF_3843

For all 5 of these elements, the full 3x3 Green-Lagrange Strain Tensor can be obtained using the function below using normalized element coordinates with values between -1 and 1:

ChMatrix33<> GetGreenLagrangeStrain(double xi, double eta, double zeta)

The full 3x3 2nd Piola-Kirchhoff Stress Tensor can be obtained for the beam and brick elements using the function:

ChMatrix33<> GetPK2Stress(double xi, double eta, double zeta)

Since the shell elements support multiple discrete layers which can result in stress discontinuities, information about the layer of interest must be provided when obtaining the full 3x3 Green-Lagrange Strain Tensor. For the shell elements, the layer index (0-index starting with the first layer defined for the element) is required as well as the normalized position through the thickness of the layer whose value is between -1 and 1.

ChMatrix33<> GetPK2Stress(double layer, double xi, double eta, double layer_zeta)

The Von Misses Stress can be obtained for the beam and brick elements using the function:

double GetVonMissesStress(double xi, double eta, double zeta)

For the shell elements, the Von Misses Stress can be obtained using the function:

double GetVonMissesStress(double layer, double xi, double eta, double layer_zeta)

Changed - Application of Gravity:

Applies to: ChElementCableANCF, ChElementBeamANCF_3243, ChElementBeamANCF_3333, ChElementShellANCF_3423, ChElementShellANCF_3443, ChElementShellANCF_3833, ChElementHexaANCF_3813, ChElementHexaANCF_3813_9, and ChElementHexaANCF_3843

The ANCF has an efficient way to exactly calculate the generalized force due to gravity. In the past this efficient gravity calculation method had to be explicitly enabled with the SetGravityOn() function which had to be coupled with a call to disable gravity at the mesh level mesh->SetAutomaticGravity(false);. These elements have now been setup so that the default mesh level gravity calculation now automatically calls the efficient and exact ANCF gravity calculation. With this change the SetGravityOn() function has been eliminated as it is no longer needed to enable the ANCF specific gravity calculation.

Added - Ability to Apply Moments:

Applies to: ChElementBeamANCF_3243, ChElementBeamANCF_3333, ChElementShellANCF_3423, ChElementShellANCF_3443, ChElementShellANCF_3833, and ChElementHexaANCF_3843

Moments can be applied at any point within these elements just like forces. For applied forces and moments, the first 3 entries in the force vector are assumed to be the applied force vector in global coordinates. The second 3 entries are assumed to be the applied moment in global coordinates. Any entries beyond the first 6 are ignored. With this change, the returned Jacobians for potential use with numeric integration were updated to reflect the actual current configuration line/area/volume ratio rather than the reference configuration line/area/volume ratio.

Added - Contacts:

  • For ChElementBeamANCF_3243 and ChElementBeamANCF_3333, the contacts are calculated using a capsule shape between the two end nodes whose radius is equal to the diagonal length of the reference cross-section shape. This is the same approach as ChElementBeamEuler.

  • For ChElementShellANCF_3443, a skin at the mid-surface is used just like ChElementShellANCF_3423 and ChElementShellANCF_3443.

  • For ChElementHexaANCF_3813 and ChElementHexaANCF_3843, a linear quadrilateral face is added to the free faces just like ChElementHexaANCF_3813_9.

[Added] New Chrono::Vehicle features

  1. A mechanism was added to allow replacing selected kinematic joints with bushings in various Chrono::Vehicle templates. Several wheeled vehicle suspension templates, the ChBalancer sub-chassis template, as well as the tracked vehicle suspension and track shoe templates were updated to include this option.

    A particular joint connection with this new option will be modeled as a bushing if bushing data is provided and as a kinematic joint otherwise. For example, the connections of the upper control arms to the chassis in the double wishbone suspension will be modeled as revolute joints (as before) if the virtual method getUCABushingData return nullptr and as bushings otherwise. Bushing information is passed as a structure which provides stiffness and damping in the "constrained" linear and rotational directions and stiffness and damping in the DOF directions of the corresponding kinematic joint (see ChVehicleBushingData). When instantiating a vehicle subsystem template through a JSON specification file, a joint with this capability will be modeled as a bushing if a JSON key "Bushing Data" is included.

  2. All wheeled vehicle suspension templates that used to model their tierods using distance constraints were updated to optionally use rigid bodies for the tierods (these include the double and single wishbone, MacPherson, multi-link). A derived class specifies the type of tierod model by overriding the virtual function UseTierodBodies. In a JSON file specification for such a suspension, the tierods will be modeled as bodies if the "Tierod" object includes the keys "Mass", "Inertia", and "Radius" and as distance constraints otherwise.

    When tierods are modeled as rigid bodies they will be connected using a spherical and universal joint or using bushings, depending on whether or not bushing data is provided.

  3. JSON-based specification of a wheeled vehicle was enhanced to allow specification of rear chassis and associated chassis connectors, as well as subchassis subsystems. An example set of JSON specification files for modelling an MTV truck with rear walking beam suspensions is available under the data/vehicle/mtv/ directory.

  4. The interface between a Chrono::Vehicle and a powertrain was modified to completely decouple the two systems and use a force-displacement co-simulation approach for all possible combinations of powertrain and driveline templates. In particular, this now allows using a shafts-based powertrain to drive one of the “simple” drivelines.

    Note also that a drivetrain's GetDriveshaftSpeed function now always reports a positive angular speed for a vehicle moving forward and a negative value for reverse (although internally these signs must be reversed due to the particular implementation of the shafts-body constraint in Chrono).

  5. The contact manager for tracked vehicles was extended to also allow use with a track test rig. Furthermore, new public methods on ChTrackedVehicle and ChTrackTestRig allow controlling rendering of contact information (normals and/or contact forces) for all monitored subsystems.

  6. Support was added for specifying and applying user-defined external forces on a vehicle's chassis. Such forces are defined in a class derived from ChChassis::ExternalForce which should override the Update method (to calculate new values for the force and/or its application point at each synchronization of the chassis state). An arbitrary number of such forces can be defined and added using ChChassis::AddExternalForce.

  7. A demonstration program (demo_VEH_RenderJSON) was created to illustrate visualization of a Chrono::Vehicle model based on JSON specification files. Using the Chrono::OpenGL run-time visualization module, this demo program allows re-creating the vehicle model after a potential change to one or more JSON specification files (use key U to trigger).

[Added] New robot models

Two new models were added to the collection Chrono robot models:

  • The Curiosity Mars Rover is a six-wheel rover model. The model can simulate the Curiosity-class Mars rover which includes a passive Rocker-Bogie suspension system. The operation and the usage of the Curiosity Rover is similar to the Viper Lunar Rover. The steering function of the Curiosity Rover needs to be explicitly controlled by calling

    SetSteerSpeed(double speed, WheelID id)

    This independent steering control allows the rover model to conduct many types of steering maneuvers. The linear DC motor model in Curiosity is similar to the DC motor in Viper (see below).

    demo_ROBOT_Curiosity_SCM illustrates the rover crossing symmetric obstacles on SCM deformable terrain and demo_ROBOT_Curioisty_Rigid shows the rover being operated on rigid terrain while climbing a stair-shaped obstacle. Both demos show the initialization process of the Curiosity rover model and the simulated Rocker-Bogie suspension system when crossing obstacles.

  • The Turtlebot is a common basic robot used as demonstration in various robot simulation packages (e.g., Gazebo/ROS). This robot consists of two drive wheels and one passive wheel. The steering function can be controlled by calling

    SetMotorSpeed(float rad_speed, WheelID id)

    on both wheels and using the speed difference between left and right wheels to turn. This is a model skeleton and in the future more functionalities can be added as necessary, such as adding sensors for autonomous driving simulation.

    demo_ROBOT_Turtlebot_Rigid shows a turtlebot model operated on rigid terrain and the turning operation.

In addition, new capabilities and functionality were added to the Viper Lunar Rover model. These include steering controls, linear DC motor models, and an active-controlled suspension system. The steering function is achieved by four rotational motors in the Z directions (vertical direction of the rover, perpendicular to the drive motor). The steering of the rover can be accessed using the function

SetTurn(TurnSig id, double turn_speed)

to specify the turn signal (left/right/hold) and the speed of the turn. The active suspension control is achieved through eight lifting motors located on the connection points between upper/lower suspension and the rover chassis. This suspension replaces the current passive suspension which only had two springs. These two springs were maintained in the new suspension system in order to include damping. Control of the active suspension can be achieved through

SetLiftMotorSpeed(double rad_speed, WheelID id)

The linear DC motor is a new option which can be used to replace the constant angular velocity motor. The function

SetDCControl(bool dc_control)

must be called before the initialization of the rover. This new function can simulate a simple DC motor with a linear torque-angular speed characteristic. The linear torque-speed map can be set using

SetMotorNoLoadSpeed(double rad_speed, WheelID id)

and

SetMotorStallTorque(double torque, WheelID id)

demo_ROBOT_Viper_Rigid and demo_ROBOT_Viper_SCM were modified to reflect changes in the initialization and controls.

[Added] New multicore collision detection system

The collision detection system previously embedded in Chrono::Multicore was updated and also made available to the usual Chrono systems (ChSystemNSC and ChSystemSMC) as an alternative to the Bullet-based collision detection system. The new collision detection system (ChCollisionSystemChrono) uses a single-level adaptive grid for broadphase; for the narrowphase, it uses analytical intersection functions for certain pairs of known primitive shapes with fallback to an MPR (Minkovski Portal Refinement) algorithm. In addition to the features previously available in Chrono::Multicore, the new stand-alone collision detection system includes additional analytical collision functions (e.g., for box-box interaction), as well as support for ray intersection.

The new collision system requires the Thrust library which is included in the CUDA toolkit or stand-alone (https://github.com/NVIDIA/thrust). If Thrust is available at configuration time, the ChConfig.h header defines a macro CHRONO_COLLISION (which can be used in user code to check availability of the new collision detection system).

The collision system type is specified through the enum chrono::collision::ChCollisionSystemType with valid values BULLET or CHRONO.
By default, both ChSystemNSC and ChSystemSMC use the Bullet-based collision detection system. Use of the new collision detection system can be enabled either by calling ChSystem::SetCollisionSystemType or else by constructing an object of type ChCollisionSystemChrono and then calling ChSystem::SetCollisionSystem. The latter method allows for changing various parameters controlling the broadphase and narrowphase algorithms from their default values. For example:

chrono::ChSystemSMC sys;
//...
sys.SetCollisionSystemType(chrono::collision::ChCollisionSystemType::CHRONO);

or

#include "chrono/ChConfig.h"
#ifdef CHRONO_COLLISION
#include "chrono/collision/ChCollisionSystemChrono.h"
#endif
// ...
chrono::ChSystemSMC sys;
// ...
#ifdef CHRONO_COLLISION
auto collsys = chrono_types::make_shared<chrono::collision::ChCollisionSystemChrono>();
collsys->SetBroadphaseGridResolution(ChVector<int>(2, 2, 1));
sys.SetCollisionSystem(collsys);
#endif

On the other hand, a Chrono::Multicore system (ChSystemMulticoreNSC or ChSystemMulticoreSMC) defaults to using the new multicore collision detection system.

See the documentation of ChCollisionSystemChrono for details on the various parameters controlling the behavior of the underlying algorithms. Note that, for backward compatibility, the existing mechanism for setting algorithmic parameters in Chrono::Multicore was preserved. In other words, one can still use code such as:

chrono::ChSystemMulticoreNSC sys;
// ...
sys.GetSettings()->collision.collision_envelope = 0.01;
sys.GetSettings()->collision.bins_per_axis = vec3(10, 10, 10);

Because of the different underlying data structures, the Chrono multicore collision detection system requires collision models of the new type ChCollisionModelChrono. As such, the ChBody constructor was modified to take the collision system type as an argument (default BULLET). Constructors for the various ChBodyEasy*** classes that take the collision system type as an argument are also provided. The user must ensure that objects with compatible collision models are added to a system! For example:

auto collision_type = chrono::collision::ChCollisionSystemType::CHRONO;
chrono::ChSystemNSC sys;
sys.SetCollisionSystemType(collision_type);
// ...
auto body = chrono_types::make_shared<chrono::ChBody>(collision_type);
sys.AddBody(body);
// ...

Alternatively, for a more flexible code, one can use the ChSystem::NewBody and ChSystem::NewBodyAuxRef to construct a ChBody or ChBodyAuxRef, respectively, with a collision model consistent with the current collision system. This assumes that the underlying collision system in the Chrono system was already set with one of the methods mentioned above:

auto collision_type = chrono::collision::ChCollisionSystemType::CHRONO;
chrono::ChSystemNSC sys;
sys.SetCollisionSystemType(collision_type);
// ...
auto body = std::shared_ptr<chrono::ChBody>(sys.NewBody());

A few of the Chrono demos were modified to illustrate the use of the new collision detection system (e.g., demo_IRR_collisionSMC, demo_IRR_collisionNSC, demo_IRR_motors), while a new demo_IRR_raycast_test demostrates the ray intersection capabilities.

Features. Some of the salient features of the new multicore collision detection system are:

  • analytical collision functions for several pairs of shapes (dynamic dispatching based on shape type if using the default ChNarrowphase::Algorithm::HYBRID narrowphase strategy):
sphere box rbox capsule cylinder rcyl trimesh
sphere ✔️ ✔️ ✔️ ✔️ ✔️ ✔️ ✔️
box ✔️ ❌ ✔️ ❌ ❌ ❌
rbox ❌ ❌ ❌ ❌ ❌
capsule ✔️ ❌ ❌ ❌
cylinder ❌ ❌ ❌
rcyl ❌ ❌
trimesh ❌
  • analytical collision functions for non-strictly convex shapes produce multiple collision points, as appropriate (e.g., up to 8 for box-box).
  • support for efficient intersection tests of mono-disperse spherical 3-D particle systems.
  • calculations done in double precision.
  • multicore parallel broadphase and narrowphase
  • definition of the broadphase grid with fixed number of cells, fixed cell dimensions, or fixed shape density.
  • support for an optional "active" axis-aligned bounding box (objects leaving this area are automatically disabled).
  • ray casting is thread safe (i.e., multiple ray intersection tests can be done concurrently, for example in a parallel OpenMP for loop).

Limitations. The main limitation of the new multicore collision detection system is that removal of collision models from the collision system is currently not supported. As such, bodies with collision enabled cannot be removed from the system once added.

Work in progress. The following enhancements are currently under development:

  • ray intersection with generic convex shapes
  • support for collision of flexible bodies

[Added] Miscellaneous additions to Chrono::Gpu

Added - Specification of the computational domain

The location of the computational domain can now be specified (in addition to its dimensions) through a fourth optional constructor argument of ChSystemGpu and ChSystemGpuMesh. By default, the axis-aligned computational domain is centered at the origin. As such,

ChSystemGpu gpu_sys(1, 1, ChVector<float>(100, 80, 60));

sets the computational domain to be [-50,50] x [-40,40] x [-30,30], while

ChSystemGpu gpu_sys(1, 1, ChVector<float>(100, 80, 60), ChVector<float>(10, 20, 30));

sets the computational domain to be [-40,60] x [-20,60] x [0,60]. Note also that, for consistency of the API, the type of the domain size (third constructor argument) was changed to const ChVector<float>&.

Added - calculation of total kinetic energy

A new function, ChSystemGpu::GetParticlesKineticEnergy was added to calculate and return the total kinetic energy of the granular particles.

Added - Contact material properties

For contact force calculation that uses material-based parameters, such as Young's Modulus, Poisson ratio and coefficient of restitution, the following function has to be called (set val to true),

void UseMaterialBasedModel(bool val);

Note that the default setting is using user-defined stiffness and damping ratio for contact forces, so no need to set val to false. The corresponding material properties associated with particles, boundary and mesh can be set using the following functions,

void SetYoungModulus_SPH(double val);
void SetYoungModulus_WALL(double val);
void SetYoungModulus_MESH(double val);

void SetPoissonRatio_SPH(double val);
void SetPoissonRatio_WALL(double val);
void SetPoissonRatio_MESH(double val);

void SetRestitution_SPH(double val);
void SetRestitution_WALL(double val);
void SetRestitution_MESH(double val);

Changed - Spherical boundary condition

Boundary condition type Sphere is now defined as a numerical boundary with mass assigned. Simple dynamics among BCSphere and granular particles can be performed, see example demo_GPU_balldrop.cpp. The spherical boundary is created with:

size_t CreateBCSphere(const ChVector<float>& center, float radius, bool outward_normal, bool track_forces, float mass);

where outward_normal is set to true if granular particles are outside the sphere. Some get and set methods are available during the simulation stage:

ChVector<float> GetBCSpherePosition(size_t sphere_id);
void SetBCSpherePosition(size_t sphere_bc_id, const ChVector<float>& pos);
ChVector<float> GetBCSphereVelocity(size_t sphere_id);
SetBCSphereVelocity(size_t sphere_bc_id, const ChVector<float>& velo);

Added - Rotating plane boundary condition

A BCPlane type boundary condition of id plane_id can be set to rotate with respect to point center at a constant angular velocity omega

void SetBCPlaneRotation(size_t plane_id, ChVector<double> center, ChVector<double> omega);

[Added] New loads for ChNodeFEAxyzrot

New classes have been added for creating loads (with automatic Jacobian generation that allow also stiff loads) for ChNodeFEAxyzrot nodes, in detail:

  • on a node of ChNodeFEAxyzrot type (user defined etc.)
  • between two ChNodeFEAxyzrot (user defined, spherical bushing, plastic bushing, generic bushing, etc.)
  • between a ChNodeFEAxyzrot and a ChBody (user defined, spherical bushing, plastic bushing, generic bushing, etc.) Previously, these types of loads were available only for the ChNodeFEAxyz node (used in tetahedrons and bricks, for example) but not for ChNodeFEAxyzrot (used in beams and Reissner shells, for example).

[Added] Analytical box box collision detection algorithm in Chrono::Multicore

A new algorithm for analytical collision detection for box-box interactions was added to the parallel collision system implemented in Chrono:Multicore. For collisions involving two boxes, this new algorithm is now used instead of the default MPR algorithm (when using narrow phase type NARROWPHASE_R or NARROWPHASE_HYBRID_MPR).

The new algorithm relies on the 15-axes test of Gottschalk, Lin, and Manocha (Siggraph 1996) for finding the direction of minimum intersection between two oriented boxes and then the collision detection is special-cased for all possible combinations of interacting features from the two boxes (9 different cases). The analytical algorithm can produce up to 8 collision pairs and works with or without a collision envelope (thus being appropriate for both SMC and NSC contact formulations).

[Added] Checkpointing capabilities in Chrono::Gpu

Chrono::Gpu can now output a checkpoint file to store the current simulation state, then re-start the simulation from that stage. The checkpointed information includes the simulation parameters such as sphere radius and density, the positions and velocities of particles, and the friction history if using a frictional model.

To use checkpointing, at any point after ChSystemGpu::Initialize() , call ChSystemGpu::WriteCheckpointFile(filename) to generate a checkpoint file named filename. Then, a new simulation can be generated from this file, by either:

  • constructing a new ChSystemGpu system from a checkpoint file; or
  • calling ChSystemGpu::ReadCheckpointFile(filename) to load the checkpointed state to a existing system (before calling ChSystemGpu::Initialize()). This will check if the loaded simulation parameters conflict with the existing system, and throw an error if so; or
  • calling ChSystemGpu::ReadCheckpointFile(filename, true), which is similar to above, but overwrites existing simulation parameters with those from the checkpoint file.

A simple example:

ChSystemGpu sys1(radius, density, make_float3(box_X, box_Y, box_Z));
/* Set simulation parameters */
sys1.Initialize();
sys1.AdvanceSimulation(1.0);
sys1.WriteCheckpointFile("checkpoint.dat");

ChSystemGpu sys2("checkpoint.dat");
/* Or load checkpoint manually...
ChSystemGpu sys2(radius, density, make_float3(box_X, box_Y, box_Z));
Set simulation parameters...
sys2.ReadCheckpointFile("checkpoint.dat");  
*/

ChSystemGpu::ReadParticleFile is used to load particle positions and velocities from a CSV file. It is useful if the particle information is meant to be supplied from a file rather than programmatically.

See demo_GPU_ballcosim for an example of using checkpointing.

Function renames:

  • ChSystemGpu::WriteFile renamed to ChSystemGpu::WriteParticleFile
  • ChSystemGpu::SetOutputFlags renamed to ChSystemGpu::SetParticleOutputFlags
  • ChSystemGpu::SetOutputMode renamed to ChSystemGpu::SetParticleOutputMode

Notes:

  • Default output flags are set to write particle positions and velocity magnitudes only, excluding angular velocity components. The output flags can be set by ChSystemGpu::SetParticleOutputFlags.
  • If the simulation loads a checkpoint file or a CSV particle file, it will not do the defragment process during Initialize(); otherwise it will. The defragment process tries to re-order the particle numbering such that the particles belong to a SD become close together in system arrays. It is by default disabled for re-started simulations to not change the numbering from the previous simulation. The user can manually enforce the defragment process by calling ChSystemGpu::SetDefragmentOnInitialize(true).

Known issues:

  • Support for CHGPU_TIME_INTEGRATOR::CHUNG is partial. The checkpoint file does not store velocities of the previous time step, so if a checkpoint is loaded while CHGPU_TIME_INTEGRATOR::CHUNG is in use, the physics will change. It is therefore best to avoid CHGPU_TIME_INTEGRATOR::CHUNG if checkpointing is needed. No demo uses CHGPU_TIME_INTEGRATOR::CHUNG.
  • The checkpoint file does not store any manually defined boundaries (those defined by ChSystemGpu::CreateBC*) or meshes (those defined by ChSystemGpuMesh::AddMesh). For now, these need to be manually added before initializing the re-started simulation.

[Fixed] Particle volume samplers and generators

  • An incorrect implementation of the HCP (Hexagonally Close Packed) sampler, utils::HCPSampler, resulting in the wrong lattice was fixed.

  • The API of the various particle generator functions utils::Generator::CreateObjects*** was changed to take as first argument a reference to a volume sampler. Previous code such as:

    utils::Generator gen(system);
    gen.createObjectsBox(utils::SamplingType::POISSON_DISK, sep, center, hdims);

should be changed to:

   utils::PDSampler<double> sampler(sep);
   utils::Generator gen(system);
   gen.CreateObjectsBox(sampler, center, hdims);

This change was necessary to obtain proper randomization (where applicable) when generating particles in successive layers; indeed, the previous implementation created a new sampler at each function invocation resulting in layers with the same distribution of particle positions.

[Changed] SCM deformable terrain improvements

The reference frame for calculation of normal and tangential forces has been changed to be aligned with the local normal (as opposed to always being aligned with the SCM frame). This fixes the generated terrain forces for SCM patches defined from height maps. The Bekker forces are aligned with the local terrain normal, while the tangential shear forces (Janosi-Hanamoto) lie in the local tangent plane. Note that the normal at each grid node is based on the undeformed terrain.

In addition, the SCM implementation was changed to extend the logical grid beyond the (horizontal) limits specified by the user during initialization; this continuation is done by extending to infinity the logical patch using the terrain height and normal from the closest grid node within the specified domain.

Finally, support was added for inclusion of tire-soil parameters (in addition to soil-soil parameters), if these are available. To provide this information, attach a structure of type SCMContactableData as user-data to the desired contactable object (e.g. a tire or track shoe body):

    auto tire_data = chrono_types::make_shared<chrono::vehicle::SCMContactableData>(Aratio, Mcoh, Mfric, Jshear);
    tire_body->SetUserData(tire_data);

The necessary data includes the SCM tangential force parameters, Mohr cohesion (Pa), friction angle (degrees), and the Janosi shear parameter (m), as well as a ratio that represents the weight of the tire-soil parameters in calculating the tangential force (using linear interpolation). A ratio value of 0 indicates using only the soil-soil parameters, while a value of 1 indicates using only the tire-soil parameters. Typically, this ratio is set as the area ratio of tread surface over tire surface.

[Changed] Miscellaneous fixes to Chrono::Vehicle API

  • Changed enum class names for suspension, driveline, and steering types to properly differentiate between wheeled and tracked vehicles. The new enum classes, defined in ChSubsysDefs.h are SuspensionTypeWV, DrivelineTypeWV, and SteeringTypeWV for wheeled vehicles and DrivelineTypeTV for tracked vehicles.

  • Eliminated the setting for differential ratio in the various driveline templates. To model a differential using the Chrono class ChShaftsPlanetary, this value must always be -1 (and represents the speed ratio of the inverted planetary) and is therefore hard-coded. This affects driveline models that use the Chrono 1-D shaft modeling elements and the schema of associated JSON specification files.

  • Modified all shafts-based driveline templates to expect a positive value for the conical gear ratios.

  • Added option (ChPowertrain::SetTransmissionMode) for setting the transmission mode of a powertrain to either AUTOMATIC or MANUAL (the latter modeling a manumatic-type transmission).
    If in MANUAL mode, gear shifting can be controlled with ChPowertrain::ShiftUp and ChPowertrain::ShiftDown.

  • Modified the "Simple CVT" powertrain template. In the new template specification, a parameter for max engine speed was added and the parameter for critical engine speed was removed.

  • Added utility function to programmatically generate a sprocket visualization mesh (ChSprocket::CreateVisualizationMesh). All Chrono::Vehicle sprocket profiles are defined as a succession of line segments and circle arcs. The default visualization is of type VisualizationType::PRIMITIVES and is a 3-D line for the profile. The utility function ChSprocket::CreateVisualizationMesh creates a trimesh that can be used to visualize the sprocket when in VisualizationType::MESH mode.

  • Changed sign of sprocket angular speed reported by GetSprocketSpeed so that a positive value corresponds to forward vehicle movement. This change was made simply for convenience and consistency.

  • Completed the braked differential steering driveline for tracked vehicles (ChTrackDrivelineBDS) to properly implement steering. In this driveline model, steering is achieved through braking; this is implemented through a driveline-specific utility function that combines the steering and braking controls.

  • Added function RandomSurfaceTerrain::EnableCollisionMesh to optionally generate a terrain collision mesh. This is necessary for tracked vehicles or wheeled vehicles with rigid tires (which rely on the underlying Chrono contact system).

[Added] New tracked vehicle model

The Marder ("marten" in German) is a tracked infantry fighting vehicle used by the German Bundeswehr since 1969. It has a running gear with 12 road wheels, sprocket, idler and 3 support rollers. The first two and the last two road wheels on every side are damped by telescopic dampers. It is driven by a 444 kW Diesel engine, torque converter with lockup and 4 gear automatic gearbox. It carries up to nine soldiers (commander, gunner, driver and six infantrymen).

The Chrono::Vehicle model is based only on public data available online and information found in literature. Although the original vehicle employs double-pin tracks, the current Chrono model only implements a single-pin track.

[Changed] Support for Z up camera in Chrono::Irrlicht

While the default remains to construct a camera with Y up, the ChIrrApp class was modified to also support a camera with Z up. To create a Z up Irrlicht visualization application, pass VerticalDir::Z as the 4th (optional) argument to the ChIrrApp constructor. For example:

    ChIrrApp application(&system, L"Demo", irr::core::dimension2d<irr::u32>(800, 600), VerticalDir::Z);
    application.AddTypicalLogo();
    application.AddTypicalSky();
    application.AddTypicalLights();
    application.AddTypicalCamera(irr::core::vector3df(1, 1, 1));

Note that this will also properly orient the sky box. Rotating with the left mouse button and panning with the arrow and PageUp/PageDwn keys works the same as with a Y up camera.

This API change also eliminates classes with only static methods (ChIrrTools and ChIrrWizard), replacing them with free functions in the chrono::irrlicht::tools namespace. See the various Chrono demos for required changes to user code.

[Changed] Reading and writing collision meshes in Chrono::Gpu

The mechanism for specifying collision meshes in a ChSystemGpuMesh was changed to allow adding meshes in a sequential manner, at any point and as many times as desired, prior to invoking ChSystemGpuMesh::Initialize(). Various different functions are provided for adding a mesh from memory:

    unsigned int AddMesh(std::shared_ptr<geometry::ChTriangleMeshConnected> mesh,
                         float mass);

from a Wavefront OBJ file:

    unsigned int AddMesh(const std::string& filename,
                         const ChVector<float>& translation,
                         const ChMatrix33<float>& rotscale,
                         float mass);

or adding multiple meshes from a list of Wavefront OBJ files:

    std::vector<unsigned int> AddMeshes(const std::vector<std::string>& objfilenames,
                                        const std::vector<ChVector<float>>& translations,
                                        const std::vector<ChMatrix33<float>>& rotscales,
                                        const std::vector<float>& masses);

All meshes such specified are offloaded to the GPU upon calling ChSystemGpuMesh::Initialize(). Note that these functions return an integral mesh identifier which can be used in subsequent function calls (e.g., ChSystemGpuMesh::ApplyMeshMotion()) to identify a particular mesh.

The Wavefront OBJ file format requirement is changed. The nodal normal information of the meshes, a.k.a. the vn lines, are no longer needed by default. The meshes are still directional in contact force calculation, and the normal directions are now implicitly determined by orderings of facet nodes, using the Right-Hand Rule (RHR).

This should not impact the usage of meshes, since for a properly generated OBJ mesh, the orderings of nodes are in line with the outward normals. The users can however, restore the old behavior by calling ChSystemGpuMesh::UseMeshNormals(true) before ChSystemGpuMesh::Initialize(). If it is called, Chrono::Gpu module will try to rearrange the orderings of facet nodes so that the RHR normals agree with the normals given by the corresponding vn lines.

Chrono::Gpu module now outputs VTK meshes correctly by writing to files the nodal coordinates and connectivity, instead of triangle soups. It also no longer appends _mesh to the output filenames. Users can still write all meshes to a single file by

    void WriteMeshes(const std::string& outfilename) const;

or write a particular mesh to a file by

    void WriteMesh(const std::string& outfilename, unsigned int i) const;

[Added] Support for the Emscripten compiler targeting WebAssembly

Chrono now provides limited support for compiling to WebAssembly and running in browser or Node.js. The core library is supported along with Chrono::OpenGL and Chrono::Vehicle. It is recommended to use the emcmake wrapper and Ninja generator when targeting WASM to ensure that all of the configuration options are set correctly.

cd build
emcmake ccmake -G Ninja ..
ninja

Changed - Shaders embedded using embedfile.cpp are now generated in pure CMake

This allows for cross-compilation which is necessary for WASM.

Changed - OpenGL components now target OpenGL ES 3.0

WebAssembly platforms typically use WebGL, which maintains a feature set roughly on par with OpenGL ES. WebGL 2.0 is able to emulate almost all of OpenGL ES 3.0, which is similar to the capabilities of the previously supported target of OpenGL 3.3. This modification should also improve overall Chrono::OpenGL performance on low-power rendering hardware such as ultra-portable laptops or mobile devices.

Release 6.0.0 (2021-02-10)

[Added] New Chrono::Csharp module

The new Chrono::Csharp module provides a C# interface to selected Chrono functionality. This allows using Chrono from C# programs and facilitates the integration of Chrono with external engines such as Unity.

The module relies on SWIG to automatically generate the interface library and wrapper C# classes. Upon build, the module creates the wrapper C# files under a chrono_csharp/ directory in the build tree and a number of shared libraries (dll on Windows, so on Linux) in either the bin/ or lib/ directory, depending on platform. Currently, the Chrono::Csharp module provides an interface to the multibody dynamics capabilities in the core Chrono module, as well as to Chrono::Vehicle and the associated vehicle models.

[Added] RoboSimian, Viper, and LittleHexy models

Models of the legged RoboSimian robot, the wheeled Viper rover, and the six-propeller LittleHexy copter are now included in the collection of Chrono models. These models have no dependencies beyond the core Chrono module, except for an optional utility class for RoboSimian visualization with Irrlicht. Python wrappers are also provided, allowing use of these models with PyChrono. Related demo programs illustrate the robots moving over rigid or SCM deformable terrain (using a core Chrono system) and over granular terrain (using the Chrono::Multicore module).

[Added] Contact force reporting through user-provided callback

The OnReportContact method of a user-supplied reporter callback (derived from ChContactContainer::ReportContactCallback) is now called with the proper force and torque for the current contact when using a Chrono::Multicore parallel system (of either NSC or SMC type). The reported contact force and torque are provided at the contact point and expressed in the contact frame (defined by the provided rotation matrix).

For examples of using the contact reporting feature with a Chrono::Multicore system, see demo_MCORE_callbackNSC and demo_MCORE_callbackSMC.

[Changed] Chrono::Gpu module rename

For consistency and to better reflect the purpose of this module, Chrono::Granular was renamed to Chrono::Gpu. With this change, the set of three Chrono modules targeting different parallel hardware (each providing different level of support for different types of simulations) are:

  • Chrono::Multicore (for shared-memory multicore parallel computing using OpenMP)
  • Chrono::Gpu (for GPU parallel computing using CUDA)
  • Chrono::Distributed (for distributed-memory parallel computing using MPI)

The name change for Chrono::Gpu and its associated classes was done in conjunction with a relatively extensive refactoring of its API. The user's interaction with the Chrono::Gpu module was streamlined by exposing in the public API a single Chrono::Gpu system object (of type ChSystemGpu or ChSystemGpuMesh) and hidding the underlying implementation in a private class.

See the various Chrono::Gpu demos in the Chrono distribution (e.g., demo_GPU_ballcosim) for usage of the new Chrono::Gpu module. The main API changes are as follows:

  • user code only needs to include one Chrono::Gpu header, namely chrono_gpu/physics/ChSystemGpu.h;
  • optional utilities are available in the utils/ subdirectory (e.g. chrono_gpu/utils/GpuJsonParser.h and chrono_gpu/utils/ChGpuSphereDecomp.h; see demo_GPU_ballcosim and demo_GPU_fixedterrain, respectively);
  • user must create a Chrono::Gpu object (of type ChSystemGpu or ChSystemGpuMesh, as appropriate) by specifying the radius of the granular material spherical particles, their density, and the domain size. This system object intermediates all interactions with the solver (through various setter and getter methods) and provides wrapper functions to initialize the problem (before the simulation loop) and advance the system state (inside the simulation loop);
  • note that names of ChSystemGpu methods were changed throughout for uniformity and coherence.

As part of this refactoring, we have also added run-time visualization support for Chrono::Gpu simulations using the Chrono::OpenGL module (if the latter is not enabled in your Chrono build, run-time visualization support is disabled). While run-time visualization adds some overhead, it may prove to be a useful debugging tool. To use it:

  • include the header chrono_gpu/utils/ChGpuVisualization;
  • create the visualization object by passing it a pointer to the Chrono::Gpu system and (optionally) a pointer to a Chrono system (if one already exists, e.g. for a co-simulation problem; if passing nullptr, such a system is created automatically);
  • initialize the visualization system (this must be done after the Chrono::Gpu system itself was initialized) by invoking the function ChGpuVisualization::Initialize();
  • in the simulation loop, at any desired frequency, invoke the function ChGpuVisualization::Render().

See demo_GPU_ballcosim, demo_GPU_mixer, or demo_GPU_repose for use of the run-time visualization option.

Finally, note that a future version of the Chrono::Gpu module may simplify its public API even further by collapsing the two current classes ChsystemGpu and ChSystemGpuMesh into a single one.

[Changed] Chrono::Multicore module rename

For consistency and to better reflect the purpose of this module, Chrono::Parallel was renamed to Chrono::Multicore.

The related API changes are simply replacements of parallel with multicore, keeping the same capitalization:

  • chrono_multicore/ replaces chrono_parallel/
  • class names use Multicore instead of Parallel (e.g.; ChSystemMulticore)
  • macro names use MULTICORE instead of PARALLEL (e.g.; CHRONO_MULTICORE)
  • the CMake project configuration script ChronoConfig.cmake expects the component name Multicore instead of Parallel

In addition, names of related demos, unit tests, and benchmark tests include the string MCORE instead of PAR (e.g.; demo_MCORE_mixerNSC).

Users of the Chrono::Multicore module should rerun CMake since the variables related to this module have also changed name (e.g.; ENABLE_MODULE_MULTICORE).

[Added] Geometric stiffness for Euler beams

The geometric stiffness term is now introduced also for the chrono::ChElementBeamEuler beam element (Euler-Bernoulli corotational beams). It is turned on by default, and it is computed via an analytical expression, with minimal cpu overhead. Note that geometric stiffness was already considered in IGA and ANCF beams, only the Euler beam was missing. Geometric stiffness is responsible of the fact that if you pull a thin beam like a string, its natural frequencies will increase, or vice-versa, if you push it, its lateral stiffness decreases up to buckling instability. Note that Euler beams ware able to simulate buckling or pulled-string stiffening even before, but only doing time integration in multiple time steps: instead, if one exported the M,K matrices for doing modal analysis of a pre-stretched Euler beam after a static analysis, the K matrix was missing the contribution of the geometric stiffness hence frequencies were incorrect only in modal analysis.

[Added] New Chrono::Synchrono module

The new Chrono::SynChrono (or simply SynChrono) module has been introduced. SynChrono aims to provide an easier entry point for physics-based autonomous vehicle simulations, and to this end it uses MPI to parallelize simulations in the case where there is no physical interaction between agents. For example in a simulation of two vehicles driving separately, there is no need to simulate interaction between them, yet they must have some knowledge of each other for visualization and for any sensors that they may carry.

SynChrono is equipped to synchronize any "agent" (e.g. an arbitrary robot whose state is defined by some combination of mechanisms), but currently there are concrete wrapper classes for synchronizing Chrono::Vehicle's, these are SynWheeledVehicleAgent and SynTrackedVehicleAgent. Another example of an agent, that can be used as a model for a user-defined agent, is SynEnvironmentAgent which represents a smart traffic intersection. Synchronization of SCMDeformableTerrain is also possible.

While SynChrono's primary purpose is to synchronize the state of agents, the MPI communication that synchronizes state data can also be used to send other messages. Examples of these could be messages from an intelligent traffic light to a vehicle (see flatbuffer/message/Syn[SPAT/MAP]Message) or from a vehicle to a vehicle with some sensor information (see SynSensorMessage). SynChrono supports both Chrono::Irrlicht and Chrono::Sensor-camera rendering of scenes, and visualization/ packages some simple defaults along with a class to facilitate easy swapping between the two.

[Changed] Rename Intel MKL Pardiso interface module

For consistency and clarity, the Chrono::MKL module was renamed to Chrono::PardisoMKL (indeed, this module interfaces only to the sparse direct linear solver Pardiso from the Intel MKL library). From a public API perspective, this name change requires the following changes to user code:

  • Include header

    #include "chrono_pardisomkl/ChSolverPardisoMKL.h"

  • The new solver name is ChSolverPardisoMKL. For example:

    auto my_solver = chrono_types::make_shared<ChSolverPardisoMKL>();
my_solver->LockSparsityPattern(true);
my_system.SetSolver(my_solver);

  • Solver type enum value for this solver is now ChSolver::Type::PARDISO_MKL

  • Use in CMake project configuration script

    To request this new module when configuring an external project to use Chrono, use the component name PardisoMKL in your CMake call to find_pakage(Chrono...). Recall that the names of the components are case insensitive

[Added] Saving POV-Ray files from Irrlicht interactive view

New feature in the Irrlicht interactive 3D view. When pressing the F12 key, a directory povray_project is immediately created on disk, and .pov .ini .assets etc. files are created inside it, so that later you can use POVray to load the .ini and render the simulation with high quality ray tracing. Press F12 again to stop saving the POVray files. Note that you must later edit the povray_project/render_frames.pov to change/add the lights, global illumination, and other specific raytracing settings. This feature is available only if you build also the POSTPROCESS module, so check both ENABLE_MODULE_IRRLICHT and ENABLE_MODULE_POSTPROCESSING in CMake.

Also, the API of the ChPovRay class has been simplified. One just uses the new SetBasePath() function to set the directory that will contain all .ini, .pov, etc. files, and anim/, output/ subdirectories. The user does not need to create these folders anymore, these are automatically generated if necessary, when setting up ChPovRay with ExportScript(). Also, some features of ChPovRay have been fixed / improved.

[Added] Support for modelling wheeled trailers

New templates were added to Chrono::Vehicle to allow creating wheeled trailers. A trailer is an assembly consisting of a "rear chassis" (see ChChassisRear), an arbitrary number of ChAxle subsystems (each including a suspension subsystem, 2 or 4 wheels, and optionally brake subsystems), and a hitch connector (see ChChassisConnectorHitch) for attaching the trailer to a vehicle chassis.

Similar to a wheeled vehicle, a concrete trailer system can be implemented in concrete C++ classes (see the Kraz semi-trailer truck model and demo_VEH_Kraz_OpenLoop), or else through JSON specification files (see the files in data/vehicle/ultra_tow and demo_VEH_WheeledJSON).

A concrete wheeled trailer system class implements the abstract class ChWheeledTrailer. A trailer can be attached to any vehicle chassis and is initialized based on the vehicle pose, the hitch location on the vehicle chassis (see ChChassis::GetLocalPosRearConnector), and the hitch location on the trailer chassis (see ChChassisRear::GetLocalPosFrontConnector):

WheeledTrailer trailer(vehicle.GetSystem(), trailer_JSON_file);
trailer.Initialize(vehicle.GetChassis());
trailer.SetChassisVisualizationType(VisualizationType::PRIMITIVES);
trailer.SetSuspensionVisualizationType(VisualizationType::PRIMITIVES);
trailer.SetWheelVisualizationType(VisualizationType::NONE);
for (auto& axle : trailer.GetAxles()) {
    for (auto& wheel : axle->GetWheels()) {
        auto tire = ReadTireJSON(trailer_tire_JSON_file);
        trailer.InitializeTire(tire, wheel, VisualizationType::PRIMITIVES);
    }
}

[Changed] Enhancements to Chrono::FSI

  • The WCSPH based explicit solver now supports both fluid dynamics and granular material dynamics.

    • The fluid dynamics is executed by default.
    • The granular material dynamics is executed by setting an "Elastic SPH" option in the input JSON file.

  • Add a consistent SPH discretization into the explicit SPH solver.

    • Both the gradient and Laplacian operators in the NS equations are discretized by a consistent format.
    • The correction matrices are calculated for both operators to enhance the consistency.
    • A second-order accuracy will be recovered by this consistent discretization.

  • Add a new particle shifting technique into Chrono::FSI.

    • The particle shifting strategy is a penetration-based particle shifting technique.
    • It supports three-dimensional fluid/granular material dynamics problems with a free surface.

  • Make the granular material solver more stable and accurate in the framework of WCSPH.

    • The Drucker-Prager yield criterion is implemented in conjunction with a four-step update strategy for the stress tensor of the granular material.
    • The interaction between a rigid multibody system and granular material is supported.

[Added] New Chrono::Sensor module

A new module (Chrono::Sensor) has been introduced to allow for sensor simulation within Chrono. Chrono::Sensor provides an interface for modeling and simulating sensors in the Chrono system to provide input for perception and control algorithms. For example, Chrono::Sensor may be used in combination with Chrono::Vehicle to simulate an autonomous vehicle equipped with multiple cameras and lidars. The module contains an API for modeling sensors with noise and distortion using a filter-graph paradigm for customization. Rendered sensors (camera and lidar) utilize ray tracing via OptiX to generate synthetic data.

Parameterized models for camera, lidar, GPS and IMU have been added with the ability to extend or implement custom sensors.

Chrono::Sensor is designed around a ChSensorManager which maintains all time synchronization and resources management between the sensing module and the core chrono system. Sensors such as a ChCameraSensor and ChLidarSensor can be added to the manager and mounted to a Chrono body which will determine the sensor's dynamics. The sensor are maintained by the ChSensorManager and all data is received via an added ChFilterAccess in the filter graph, determined by the sensor's parameters.

Locations:

  • Chrono::Sensor source code is maintained under src/chrono_sensor/
  • Demos are located in src/demos/sensor/
  • Sensor specific data is located in data/sensor/

[Changed] Setting OpenMP number of threads

The mechanism for setting the number of OpenMP threads used in various parts of Chrono has been modified and unified. The API is common to Chrono and Chrono::Parallel; however, the number of OpenMP threads is set differently for the two classes of systems.

  • ChSystem: ChSystemNSC and ChSystemSMC

    OpenMP (enabled by default) may be used in three different places. The number of threads used for each can be set separately and independently, using:

    my_system.SetNumThreads(nthreads_chrono, nthreads_collision, nthreads_eigen);

    If passing a value of 0 for either nthreads_collision or nthreads_eigen these values are set to be equal to nthreads_chrono.

    • Currently, Chrono itself uses OpenMP for the parallel evaluation of internal forces and Jacobians for FEA and for parallel ray-casting in SCM deformable terrain. In both cases, the value nthreads_chrono is used in a num_threads clause for the OpenMP parallel for loops.
    • The latest Bullet collision detection system embedded in Chrono is built by default with OpenMP support (this can be disabled during CMake configuration). The value nthreads_collision is used through num_threads clauses in all Bullet-internal OpenMP parallel for loops (note that this is a Chrono-specific modification to Bullet).
    • Eigen uses OpenMP in a few algorithms. For Chrono use, the most relevant ones are the Eigen sparse direct solvers, SparseLU and SparseQR. These will employ the number of threads specified as nthreads_eigen.

    By default, that is if SetNumThreads is not called, we use nthreads_chrono=omp_get_num_procs(), nthreads_collision=1, and nthreads_eigen=1.

  • ChSystemParallel: ChSystemParallelNSC and ChSystemParallelSMC

    In Chrono::Parallel, the same number of OpenMP threads (default omp_get_num_procs()) is used for both the parallel collision detection algorithm and for the parallel iterative solvers. In the call to SetNumThreads, the value nthreads_collision is ignored and automatically set to be equal to nthreads_chrono. As such, typical user code will have

    my_system.SetNumThreads(nthreads);

  • The number of OpenMP threads used by the sparse direct solvers in Chrono::MKL (Pardiso) and Chrono::MUMPS are specified as an optional constructor argument. By default, both solvers use a number of threads equal to the number of available processors (as returned by omp_get_num_procs).

[Changed] Redesigned SCM deformable terrain

The SCM deformable terrain was completely redesigned for improved performance. Compared to the previous implementation based on an underlying trimesh representation, the new code - using a Cartesian grid - is significantly faster (speedups of 50x and more). The API changes are minimal:

  • Initialization from a Wavefront OBJ file was removed. An SCM terrain patch can be specified as a flat rectangular area or else as a height-field obtained from a (gray-scale) image.

    A flat SCM terrain patch can be initialized using

    terrain.Initialize(length, width, resolution);

    where length and height are the patch dimensions in the reference plane and resolution is the grid spacing. Note that the height (level) of the patch is implicitly defined by the center of the ACM reference plane (specified through SCMDeformableTerrain::SetPlane).

    A height-field SCM terrain patch can be initialized using

    terrain.Initialize(filename, sizeX, sizeY, min_height, max_height, resolution);

    where filename is the name of an image file, sizeX and sizeY specify the patch extents in the reference plane, min_height and max_height define the height range (a purely black image pixel corresponds to min_height, a purely white pixel corresponds to max_height) and resolution is the SCM grid spacing.

  • The option for adaptive mesh refinement was obsoleted. Performance of the new implementation is limited by the ray-casting operations and as such no additional benefits are obtained from starting with a coarse grid.

  • A "moving patch" is now defined by specifying an object-oriented-box attached to a moving body. For example,

    terrain.AddMovingPatch(my_body, ChVector<>(0, 0, 0), ChVector<>(5, 3, 1));

    associates a moving patch with the box of size (5,3,1) attached at the center of the body reference frame of my_body. Ray casting is performed only for the SCM grid nodes that are in the current projection of this OBB onto the SCM reference plane.

    If the user does not define any moving patches, SCM uses the projection of the current bounding box of all collision shapes in the system.

  • Bulldozing effects are enabled using SCMDeformableTerrain::EnableBulldozing.

  • SCM soil parameters and bulldozing settings are specified as before.

[Added] Tracked vehicle support in PyChrono

Tracked vehicle templates and models are now exposed in Chrono::Python and available for use through PyChrono.

[Changed] Constitutive models for EULER beams

Section properties of the ChElementBeamEuler are now defined via a new class ChBeamSectionEuler and subclasses. Old classes for Euler sections have been renamed and rewritten, the old classes have been deprecated and will be removed in future:

  • ChBeamSectionBasic, use ChBeamSectionEulerSimple instead
  • ChBeamSectionAdvanced, use ChBeamSectionEulerAdvanced instead

Note that in the previous release, the Sy and Sz values for shear center offset in ChBeamSectionAdvanced were assumed with opposite sign respect to the description and illustrative figure: now this bug is fixed, and shear center offset works the same as in Cosserat beams.

Also, a new class ChBeamSectionEulerGeneric has been added, that does not make the assumption of uniform density and uniform elasticity, so it accepts directly the beam rigidity values bypassing the E and Izz Iyy values.

To speed up coding in case of simple beams, two new classes ChBeamSectionEulerEasyRectangular and ChBeamSectionEulerEasyCircular have been added.

[Changed] Constitutive models for IGA beams

Inertial properties of Cosserat beams, such as the ChElementBeamIGA, are now defined via a new class ChInertiaCosserat and subclasses, that can be composed into ChBeamSectionCosserat just like we do for elastic properties, damping, etc. This is more flexible than before. Therefore these functions have been removed:

  • ChBeamSectionCosserat::SetDensity()
  • ChBeamSectionCosserat::SetArea()

Consequences:

  • the ChBeamSectionCosserat constructor has changed: it always requires a ChInertiaCosserat too.
  • you should create a ChInertiaCosserat, like ChInertiaCosseratUniformDensity, set density and area there, and add the ChInertiaCosserat to the ChBeamSectionCosserat.
  • the polar part of inertia was using the width-height values of the visualization, that was limiting and often not related to the beam; now it is a physical value
  • the rotational inertia (in lumped mass matrix) of the beam is more precise

Moreover, also because of this modification, and in order to make the API less ambiguous, these functions have been removed:

  • SetAsCircularSection()
  • SetAsRectangularSection() from the ChBeamSectionCosserat and from all elastic/damping/plastic models. We kept them only for the elastic models where they make sense.

Consequences:

  • previously one could call ChBeamSectionCosserat::SetAsRectangularSection() and automatically invoke the same for all sub-models (elasticity, etc.) whereas now one has to call SetAsRectangularSection() for the single sub-models, only when needed and when available.
  • To make things easier, we provide the new classes ChBeamSectionCosseratEasyRectangular and ChBeamSectionCosseratEasyCircular that in a single shot create elastic and inertia models, sets them as rectangular or circular, and sets the visualization type.

[Added] Obtaining body applied forces

The new functions ChBody::GetAppliedForce and ChBody::GetAppliedTorque return the body resultant applied force and torque, respectively.

  1. These functions include contributions from all external applied loads acting on a body (e.g., gravitational forces, forces defined through ChForce elements, forces specified through ChLoad, springs, dampers, etc). However, they do not include any constraint forces. In particular, this means that contact forces are not included when using the NSC formulation, but are included when using the SMC formulation. For the former case, use ChBody::GetContactForce and ChBody::GetContactTorque to obtain the resultant contact force and torque, respectively.

  2. Note that reporting this information requires a traversal of the entire system and caching the generalized forces, a quantity that is otherwise not computed in the form required for this reporting. To prevent any additional overhead when this information is not requested by the user, this is done using lazy evaluation. In other words, no overhead is incurred at a simulation step if no applied forces are requested. On the other hand, there is a small (but non-zero) cost when a call to ChBody::GetAppliedForce or ChBody::GetAppliedTorque is made; however, this cost is constant at any given time, regardless of how many queries are made. Note also that this additional cost is not incurred for Chrono::Parallel.

[Added] Chrono::Vehicle simulation world frame

While the default world frame for Chrono::Vehicle simulations is an ISO (Z up) frame, we now provide support to simulate vehicles in a scene specified in a different reference frame (for example, an Y up frame). The world frame is uniquely defined through a rotation matrix (the rotation required to align the ISO frame with the desired world frame). To change the world frame definition from the default ISO convention, the desired world frame must be set before any Chrono::Vehicle library call:

ChMatrix33<> world_rotation = ...
ChWorldFrame::Set(world_rotation);

A shortcut is provided to specify a world frame with Y up (and X forward, Z to the right):

ChWorldFrame::SetYUP();

[Changed] CASCADE module

  1. Support for OpenCASCADE 7.4.0. The API of OpenCASCADE introduced some changes in the 7.4.0 version so we also updated the CASCADE module of Chrono. Please download and upgrade your OpenCASCADE version as it is not backward compatible. (The module is optionally built via CMake configuration flag ENABLE_MODULE_CASCADE, also remember to update the CASCADE_INCLUDE_DIR and CASCADE_LIBDIR paths and to update your PATH if you added the path to Cascade dlls)

  2. The method ChCascadeDoc::CreateBodyFromShape() is obsolete. Just use the ChBodyEasyCascade class to obtain the same result, for example:

    auto mbody = chrono_types::make_shared<ChBodyEasyCascade>(myshape, ...);

  3. The mesh tesselation algorithm could give coarser or finer meshes with respect to the previous release.

[Changed] Collision shapes and contact materials

The main change is that now contact materials are associated with collision shapes, as opposed to bodies. We've always had the underlying concept of a collision shape, with a body's collision model potentially including multiple shapes, but these were always sharing the exact same contact material. With the new code, each collision shape in a collision model can have its own contact material properties. Of course, through shared pointers, collision shapes in the same model or even in different models can still point to the same (shared) material. Also, a nice consequence of this change is that now a ChBody is agnostic of contact method or contact materials (as it should be).

The new API requires you to always pass a material (as a shared pointer) whenever you create a collision shape or other contactable "primitive" (such as a contact surface or node cloud for FEA collision). The material you pass must still be consistent with the contact method (NSC or SMC) of the containing system.

Here's a summary of the main API changes (there were many other changes under the hood, but here we only highlight changes to the public API). Moreover, we discuss only the C++ API, but the equivalent changes also apply to the Python API.

  1. Renamed headers. For consistency, we renamed various files under src/chrono/collision which had a prefix ChC to simply have the prefix Ch. For example, ChCCollisionModel.h --> ChCollisionModel.h

  2. The contact method, NSC or SMC, is now a top-level enum class named ChContactMethod (previously it was nested under ChMaterialSurface). So use things like:

    if (system->GetContactMethod() == ChContactMethod::NSC) {
    ...
}

  3. Contact materials. The functionality of the base class ChMaterialSurface and derived classes ChMaterialSurfaceNSC and ChMaterialSurfaceSMC is unchanged. However, for convenience, material properties common between NSC and SMC were moved to the base class (these include coefficients of friction for sliding, rolling, spinning and the coefficient of restitution). Furthermore, we provide a utility method to create a contact material of the specified type with corresponding default parameters. In a program that can switch between SMC and NSC formulations (say, based on a flag ChContactMethod contact_method), you can then write

    ChContactMethod contact_method = ChContactMethod::SMC;  // or ChContactMethod::NSC
...
auto mat = ChMaterialSurface::DefaultMaterial(contact_method);
mat->SetFriction(0.7f);

    If you also want to change a contact method-specific property, you must then use something like:

    if (contact_method == ChContactMethod::SMC) {
   std::static_pointer_cast<ChMaterialSurfaceSMC>(mat)->SetYoungModulus(1e7f);
}

  4. The ChBody constructor does not take the contact method as an argument anymore (which previously defaulted to NSC)

  5. ChBodyEasy*** classes. The list of constructor arguments here has changed, for a more natural order. All collision-related arguments have been moved to the end of the list. In particular, the flag to indicate whether or not to create a visual asset (default true) comes before the flag to indicate whether or not to create a collision shape (default false). If the latter is true, the next argument must be a contact material (default nullptr).

    Be careful here, as it's easy to overlook the correct changes (because of arguments with default values). For example, the old:

    auto body = chrono_types::make_shared<ChBodyEasySphere>(radius, density, true);  // old

    would create a sphere with visualization and collision enabled (with material properties from the body itself). This is also valid with the new code, but this will now create a body with a sphere visualization asset but no collision shape. To get the expected result, you need to use:

    auto body = chrono_types::make_shared<ChBodyEasySphere>(radius, density, true, true, material);  // new

    and pass a valid material (consistent with the system to which you will add the body).

  6. There is now a proper ChCollisionShape class which is very light weight (it carries only the type of shape, from an enum ChCollisionShape::Type, and a (shared) pointer to a contact material). There are derived classes for the various collision systems (namely the one based on Bullet and the one used in Chrono::Parallel), but few users would have to worry about or work with those.

  7. A collision model maintains a vector of collision shapes (in the order they were added to the model by the user). There are public accessor methods on ChCollisionModel to get the list of shapes or individual shapes (by its index in the list).

  8. Adding collision shapes. All ChCollisionModel::Add*** methods now take as their first argument a (shared) pointer to a contact material. There is no "default" material automatically constructed under the hood for you anymore. However, the NSC and SMC contact materials still have constructors that set their respective properties to some default values. So you can write something like:

    // construct an SMC material with default properties
auto my_mat = chrono_types::make_shared<ChMaterialSurfaceSMC>(); 
auto my_body = chrono_types::make_shared<ChBody>();  // note: no need to specify SMC contact here!
...
my_body->GetCollisionModel()->AddSphere(my_mat, radius);
...
my_system.AddBody(my_body);  // it is assumed that my_system is a ChSystemSMC

  9. Utility functions in ChUtilsCreators. Similar to ChBodyEasy***, the various utils::Add***Geometry functions now also require a contact material; this is always their 2nd argument.

  10. FEA contact surfaces. The two options, ChContactSurfaceMesh and ChContactSurfaceNodeCloud now require a contact material at construction (there is no SetSurfaceMaterial() method anymore). As you already know, the only acceptable type of material in this case is ChMaterialSurfaceSMC. Note that the contact material passed at construction is shared by all components of the FEA contact surface (triangles or nodes, respectively). Sample code:

    auto my_surf = chrono_types::make_shared<ChContactSurfaceMesh>(my_materialSMC);
my_mesh->AddContactSurface(my_surf);
my_surf->AddFacesFromBoundary(0.05);

  11. ChCollisionInfo and user-provided contact callbacks. A ChCollisionInfo object (which encapsulates information about a collision pair and is used internally to create contacts) now also include pointers to the colliding shapes in the two interacting collision models. When a contact must be created internally, a composite contact material is created on the fly from the contact materials of the two colliding shapes.

    This has a direct impact on how a user can add custom contacts through a ChSystem::CustomCollisionCallback object. Indeed, in its override of OnCustomCollision, a derived callback class is expected to create a ChCollisionInfo object and then pass it to the AddContact method of the underlying contact container. However, such a custom collision has no collision shapes to work with! For this purpose, we added a new form of AddContact that takes as additional argument to ChMaterialSurface objects. In this case, the ChCollisionInfo object can set its collision shape members to nullptr.

    For examples, look at two new demos: demo_IRR_custom_contact and demo_PAR_custom_contact.

  12. Chrono::Vehicle changes. Most of the changes here were low-level (and as such transparent to the user). The notable difference has to do with terrain specification. The RigidTerrain::AddPatch function now expect as their first argument a contact material (consistent with the containing system) that will be used for that one patch (box patch, trimesh patch , or height-field patch).

    If you are using vehicles specified through JSON files, beware that for some subsystems the schema has changed for entries related to collision shapes and contact materials. See the examples provided in the various sub-directories of data/vehicle/.

  13. Chrono::Parallel and Chrono::Distributed. Here too, the vast majority of the changes happened under the hood. Besides the changes described above (related to how collision shapes are defined), there are only a couple of things to mention:

  • In Chrono::Parallel, the custom specification of collision shapes was merged into a new class ChCollisionShapeParallel. If, for any reason, you need to traverse the list of collision shapes in a collision model, simply loop through the vector of shapes in ChCollisionModel (see #7 above).
  • In Chrono::Distributed, the analytical plane boundaries now require a contact material at construction (internally, this is used in a custom collision callback, as described in #11 above).

Release 5.0.1 (2020-02-29)

[Fixed]

  • Correct the ChElementBeamANCF applied moment calculation so that it uses normalized shape function derivatives
  • Comment out code related to applying moments on ANCF elements (requires further testing))

Release 5.0.0 (2020-02-24)

[Changed] Refactoring of dense linear algebra

Starting with this release, Chrono relies on Eigen3 for all dense linear algebra.

  1. With this change, Chrono requires Eigen3 version 3.3.0 or newer. Unless not possible for other reasons, we suggest you use their latest version, 3.3.7.
  • Eigen is available for download at http://eigen.tuxfamily.org/
  • Eigen is a headers-only library, so no install is required in order to use it in Chrono.
  • If the location of the Eigen headers is not automatically detected by CMake, manually specify it by setting the CMake variable EIGEN3_INCLUDE_DIR.
  • Note: CUDA 9.1 has removed a file (math_functions.hpp) which is referenced by Eigen prior to version 3.3.6. As such, if you build any of the GPU-based Chrono modules (FSI or Granular) and use CUDA 9.1, make sure to use Eigen 3.3.7.
  1. The switch to Eigen does come with a few strings attached
  • On the flip side, this makes the code a lot cleaner, easier to understand and maintain, and facilitates several further developments on our road-map.
  • Furthermore, performance did not degrade and in fact improved meaningfully on practically all our benchmark tests (measured with GCC and clang on Linux and MacOS).
  • On the other hand, libraries that use expression templates metaprogramming techniques (as Eigen does) lead to longer compile times. Moreover, while release (optimized) code is faster, code built in debug mode will likely be (significantly) slower.
  • Finally, because several Chrono classes now need to use an (Eigen-provided) overloaded operator new to ensure memory alignment and because of some limitations of the C++ language, this change has an important consequence on user code: std::make_shared cannot always be used safely. The solution we adopted is to provide chrono_types::make_shared replacement functions which should be used throughout (see below).
  1. The new matrix and vector classes
  • The "old" Chrono matrix types (ChMatrixNM, ChMatrixDynamic, ChVectorDynamic) are now nothing but type aliases of appropriate Eigen types (see ChMatrix.h). In other words, use them as you would Eigen types (see https://eigen.tuxfamily.org/dox/group__TutorialMatrixArithmetic.html).
  • For completeness, we introduced additional types (such as ChVectorN, ChRowVectorN, ChRowVectorDynamic), all defined in ChMatrix.h.
  • We only implemented a handful of extensions needed for Chrono (such as a method for computing the WRMS vector norm) using the "back-door" extension mechanism provided by Eigen (see ChMatrixEigenExtensions.h)
  • The "old" base class ChMatrix was eliminated. For the instances where a Chrono function needs to accept either a dynamic (ChMatrixDynamic) or a static (ChMatrixNM) argument, we rely on the Eigen::Ref mechanism. For this, we defined various type aliases, such as ChMatrixRef and ChMatrixConstRef (see ChMatrix.h). Currently, these assume a 'double' scalar type as this is all that's needed in Chrono (they could be templated by the scalar type, but this will be done only if absolutely needed).
  • For 3x3 matrices, the ChMatrix33 class (as before, templated by the scalar type) is derived from a 3x3 fixed-size vectorizable Eigen matrix. Using inheritance here was needed in order to implement various custom constructors and methods.
  • For clarity and to properly separate responsibilities, we added a small set of 3x4 and 4x4 matrices specific to multibody dynamics. These derived classes have strict and limited functionality and are unlikely to show up in user code (see ChMatrixMBD.h).
  • Note: for now, the ChVector and ChQuaternion classes were left unchanged.
  • See demo_CH_linalg.cpp for simple examples of matrix operations with the new Chrono classes and types.
  1. Obsolete/eliminated Chrono classes
  1. Some considerations for developers
  1. API and user code
  • Except for the limited situations where user code explicitly used the old-style matrix operations (which should now use the cleaner Eigen API; see e.g. https://eigen.tuxfamily.org/dox/group__TutorialMatrixArithmetic.html), the main impact on users has to do with the shared pointers in the Chrono public API.
  • The issue has to do with the fact that std::make_shared uses 'placement new' to create a shared pointer with a single memory allocation. This means that std::make_shared will not use an overloaded 'operator new' for classes that provide it (for memory alignment considerations).
  • To maintain encapsulation (as much as possible) and not require users to know/care about the guts of Chrono (namely know which classes overload, or have a parent that overloads, their operator new), the solution we adopted is to provide custom make_shared functions (in the namespace chrono_types) and a mechanism to pick at compile-time which one should be used (conditional on the object's class having or not an overloaded operator new). For classes that require aligned memory (i.e. classes that have an overloaded operator new), chrono_types::make_shared explicitly creates the shared_ptr. Otherwise, it falls back on using std::make_shared (see ChTypes.h).
  • As such, user code should always create a shared_ptr using something like:
auto foo = chrono_types::make_shared<T>(bar);
  • See the various Chrono demos and tests for examples.

[Changed] Eigen sparse matrices and updates to direct sparse linear solvers

Starting with this release, Chrono also uses Eigen for all sparse matrix needs (which are relatively limited and have little, if any, direct consequence on the public API). A ChSparseMatrix is just a type alias to an Eigen SparseMatrix with double scalar type, row-major storage order, and int storage index type.

  1. The main effects on public API relate to concomitant updates we made to the sparse direct linear solvers (the Chrono::MKL interface to the Intel MKL Pardiso solver and the Chrono::Mumps interface to the MUMPS solver). While we now rely on Eigen’s own interface to Pardiso, Chrono::Mumps still implements a custom interface to MUMPS (ChMumpsEngine).

For examples of usage, see demo_FEA_cablesMKL and demo_FEA_cablesMUMPS.

  1. Both sparse direct solvers (and any others that may be provided in the future) share the same functionality in terms of controlling the identification and update of the matrix sparsity pattern. The main features implemented in the base class ChSolverDirect are:
  • sparsity pattern lock The sparsity pattern lock skips sparsity identification or reserving memory for non-zeros on all but the first call to the solver setup. This feature is intended for problems where the system matrix sparsity pattern does not change (or changes very little) from call to call. See ChSolverDirect::LockSparsityPattern.
  • sparsity pattern learning The sparsity pattern learning feature acquires the sparsity pattern in advance, in order to speed up matrix assembly. Enabled by default, the sparsity matrix learner identifies the exact matrix sparsity pattern (without actually setting any non-zeros). See ChSolverDirect::UseSparsityPatternLearner.
  • In situations where the problem structure changes but relatively infrequently, it is still desirable to lock the sparsity pattern. However, if using the sparsity pattern learner, an update must be explicitly triggered by the user after a problem modification (by calling ChSparseDirect::ForceSparsityPatternUpdate). For an example, see demo_FEA_beams_extrude.
  • Finally, there is an option to provide an estimate for the matrix sparsity (a value in [0,1], with 0 corresponding to a fully dense matrix). When the sparsity pattern learner is disabled, this value is used if/when required to reserve space for matrix indices and non-zeros. See ChSolverDirect::SetSparsityEstimate.
  1. If appropriate and warranted by the problem setup, it is highly recommended to enable the sparsity pattern lock. This can significantly improve performance for more complex problems (larger size and/or problems which include constraints).

Release 4.0.0 (2019-02-22)

In addition to various bug fixes and enhancements, Chrono v4.0.0 includes the following main updates:

  • Adopted Google test and benchmark libraries for unit testing and performance benchmarking.
    • these are set up as Git submodules
    • unit tests relocated under src/tests/unit_tests; several unit tests were migrated to use the Google test framework
      • examples in src/tests/benchmark_tests illustrate use of the Google benchmark framework
  • Core Chrono module
    • new LinkMotor elements, for modeling linear and rotational motors
    • new parsers for generating Chrono models from ADAMS adm files and OpenSim osim files (these parsers provide partial support)
  • Chrono::FEA
    • FEA support is now included in the core Chrono module and not as an optional module anymore
    • new IGA (isogeometric) beam element
    • new 8-node, high-order ANCF shell element
  • Chrono::MUMPS
    • new optional module providing an interface to the MUMPS sparse direct linear solver
  • Chrono::Distributed
    • new optional module for MPI_based distributed parallel simulation of granular dynamics problems
    • currently only supports SMC contact formulation (penalty approach) and a reduced number of collision shapes (spheres and triangular meshes)
  • Chrono::FSI
    • support for Implicit Incompressible Smoothed Particle Hydrodynamics
    • support for fluid-solid interaction with ANCF cable/shell elements
    • new GPU-based sparse linear solvers via CUBLAS and CUSPARSE libraries
  • Chrono::Python
    • Python interface to Chrono now distributed as an Anaconda package
    • new interface to the Chrono::MKL and Chrono::Cascade modules
    • several new demos, including demo for use with TensorFlow
  • Chrono::Vehicle
    • new tire models (TMeasy, Pacejka89)
    • new templates for continuous-band tracks
    • new suspension templates
    • new vehicle models (generic sedan, UAZ van)