[AHM] Add Polkadot call filtering #559

ggwpez · 2025-01-23T17:27:20Z

To be merged into the AHM working branch.

Changes:

Configure the RC Migrator pallet as call filter for the Polkadot Relay chain
Test
Does not require a CHANGELOG entry

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

seadanda

I like the approach! We should get input from a wider group on the individual filtered calls/pallets, maybe based on the owners on the excel sheet

pallets/rc-migrator/src/lib.rs

relay/polkadot/src/lib.rs

seadanda · 2025-01-24T14:25:52Z

relay/polkadot/src/lib.rs

+		// ParaSessionInfo has no calls
+		ParasDisputes(..) => (OFF, ON), // TODO check with security
+		ParasSlashing(..) => (OFF, ON), // TODO check with security
+		OnDemand(..) => (OFF, ON),


If we get paritytech/polkadot-sdk#5990 merged in time we should try to avoid filtering on-demand, as there will no longer be a balances dependency and we should avoid a situation where parachains can't make blocks through the migration.

I will add a TODO

relay/polkadot/src/lib.rs

seadanda · 2025-01-24T14:39:22Z

relay/polkadot/src/lib.rs

+		Registrar(..) => (OFF, ON),
+		Slots(..) => (OFF, ON), // TODO not sure
+		Auctions(..) => (OFF, OFF),
+		Crowdloan(..) => (OFF, ON), // TODO maybe only payouts


Yea probably just withdraw, refund and dissolve.
Ideally we'd transfer this state to AH and allow people to withdraw or refund there directly, but it would be basically an entirely new pallet and would break all the crowdloan apps maybe unnecessarily. That's likely going to be the next phase of AHM though when the EDs go up. Still like 20 months until the last crowdloans expire so we need something long term

The impact is very low, I would just disable.

The impact is very low, I would just disable.

You mean also after the migration? I was thinking about enabling the withdraw function after the migration again.

Changed to:

Crowdloan(crowdloan::Call::<Runtime>::dissolve { .. } | crowdloan::Call::<Runtime>::refund { .. } | crowdloan::Call::<Runtime>::withdraw { .. }) => (OFF, ON), Crowdloan(..) => (OFF, OFF),

seadanda · 2025-01-24T14:46:49Z

relay/polkadot/src/lib.rs

+		FastUnstake(..) => (OFF, OFF),
+		// DelegatedStaking has on calls
+		// ParachainsOrigin has no calls
+		Configuration(..) => (OFF, ON),


Suggested change

Configuration(..) => (OFF, ON),

Configuration(..) => (ON, ON),

All root calls

We also can have a similar impl for the EnsureOrigin if needed to let only Fellows to command some calls during migration. I do not think we can execute the root fast enough.

Yea good idea.

relay/polkadot/src/lib.rs

seadanda · 2025-01-24T14:55:30Z

relay/polkadot/tests/ahm/mod.rs

+	let mut t: sp_io::TestExternalities =
+		frame_system::GenesisConfig::<T>::default().build_storage().unwrap().into();
+
+	// MQ calls are never filtered:


Did we get to the bottom of the prioritisation of system messages? I lost track of the status of your streaking work

Yea it worked here but we should get it audited & merged paritytech/polkadot-sdk#6059

seadanda · 2025-01-24T14:58:44Z

relay/polkadot/tests/ahm/mod.rs

+}
+
+fn is_forbidden(call: &polkadot_runtime::RuntimeCall) -> bool {
+	let Err(err) = call.clone().dispatch(RuntimeOrigin::signed(AccountId32::from([0; 32]))) else {


This is actually a nice test to run on basically every pallet and extrinsic during the migration except for a few exceptions that are explicitly allowed from signed origins - the ones that are root only will fail anyway from this origin.

We could then have a separate check for the root calls that should be filtered, with the baseline being that all root calls are allowed except the ones we know will cause problems.

Yes we could do that. Currently we need to manually construct the call arguments as well since our RuntimeCall enum does not implement an Arbitrary trait.

muharem · 2025-01-27T04:09:20Z

relay/polkadot/src/lib.rs

+		FastUnstake(..) => (OFF, OFF),
+		// DelegatedStaking has on calls
+		// ParachainsOrigin has no calls
+		Configuration(..) => (OFF, ON),


We also can have a similar impl for the EnsureOrigin if needed to let only Fellows to command some calls during migration. I do not think we can execute the root fast enough.

muharem · 2025-01-27T04:11:00Z

relay/polkadot/src/lib.rs

+		Registrar(..) => (OFF, ON),
+		Slots(..) => (OFF, ON), // TODO not sure
+		Auctions(..) => (OFF, OFF),
+		Crowdloan(..) => (OFF, ON), // TODO maybe only payouts


The impact is very low, I would just disable.

relay/polkadot/src/lib.rs

Co-authored-by: Dónal Murray <[email protected]>

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

ggwpez · 2025-01-27T12:47:32Z

Going to merge. Tests should run after #561

A high-level look of the migration is this: <img width="1204" height="745" alt="Screenshot 2025-09-17 at 18 23 57" src="https://github.com/user-attachments/assets/1fb39ef8-5efa-4db2-81db-6dd775af3a39" /> You can see the main components being the `pallet_rc_migrator` and `pallet_ah_migrator`. The RC migrator pallet takes data out of the RC storage and enqueues it for AH through XCM::Transact calls to the AH migrator pallet. Each pallet on the RC side has a migrator module that handles the removal of the old data and creation of the messages for AH. AH then processes these messages through the MQ pallet and acknowledges back to RC that they were processed (not shown in the graphic). There is rate-limiting code in place to prevent it from overloading the DMP queue or Asset Hub. ## For Reviewers The review comments are being addressed in #915. We need eyes on the Core part that is described below. ## Core STM The main stage transitions look like this. The only manual part is the scheduling call by the fellowship that kicks off the procedure: * `Pending` wait for Fellowship to call `schedule_migration(when)` -> Scheduled * `Scheduled` waiting for scheduled block -> `WaitingForAH` * `WaitingForAH` AH replies that it is ready -> `WarmUp` * `WarmUp` waiting for warm-up end -> `Starting` * `Starting` doing some startup initialization -> `DataMigration` * `DataMigration` MAIN PART **all pallet migrations finish** -> `CoolOff` * `CoolOff` waiting for cool-off to end -> `SignalMigrationFinish` * `SignalMigrationFinish` send signal to AH that we are done -> `MigrationDone` * `MigrationDone` finished, unlock all Pallets. ### State Machine The core State Machine lives in the `RcMigrator` pallet in its `on_initialize`: https://github.com/polkadot-fellows/runtimes/blob/8ef1cc739d756b109dc93eaf3b9da00e3dcf1383/pallets/rc-migrator/src/lib.rs#L1338-L1342 On each block the Rc Migrator checks the current state and possibly progresses to the next one. It will only do a single state transition per block to reduce complexity of the code. Generally, there are three states per pallet (called [*stages*](https://github.com/polkadot-fellows/runtimes/blob/8ef1cc739d756b109dc93eaf3b9da00e3dcf1383/pallets/rc-migrator/src/lib.rs#L190-L389) in the code). Some pallets have more then three, but it is generally still a multiple of three and always follows the pattern of `PalletInit`, `PalletOngoing { cursor }`, `PalletDone`: https://github.com/polkadot-fellows/runtimes/blob/8ef1cc739d756b109dc93eaf3b9da00e3dcf1383/pallets/rc-migrator/src/lib.rs#L239-L244 Each pallet then has one migrator struct (eg. `MultisigMigrator<T>`) that migrates the storage items from the Relay side. It lives in the module of its name `rc-migrator/src/multisig.rs` respectively. Taking Multisigs as an example; you can find two functions in the migrator struct: `migrate_many` and `migrate_single`. The former one is from the [`PalletMigration` trait](https://github.com/polkadot-fellows/runtimes/blob/715dbb4455a127066d0118ce7a096c72200e1126/pallets/rc-migrator/src/types.rs#L209-L221). The `migrate_single` function is done by convention to keep the code readable. The `migrate_many` does the following: - Weight accounting for the RC side: Normal weight tracking to not have overtime RC blocks - Weight accounting for the AH side: Ensuring to not send messages that would take up too much weight on AH processing - Ensure that DMP messages are sensibly sized by using the `XcmBatchAndMeter` - Taking the data out from the Relay chain (deleting it) - Including the data into a DMP message and sending it towards AH ### AH Side The main logic on Asset Hub lives in the `AhMigrator` pallet. It contains at least one extrinsic per pallet to receive the incoming data from the RC. We are using extrinsics since RC is wrapping the data into XCM::Transacts: https://github.com/polkadot-fellows/runtimes/blob/9a20b12e22b019c1c0b15b9af897567a559e424c/pallets/ah-migrator/src/lib.rs#L650-L653 This calls into the [`multisig` module](https://github.com/polkadot-fellows/runtimes/blob/6b603ca47e5c49b3a898be3f8f6b078c424f42a0/pallets/ah-migrator/src/multisig.rs#L37) to integrate the data into the storage. Per convention we are emitting events for each item and the whole batch. The main task of the AH side is to integrate the data. In the example of the multisig it is special since we do not migrate the multisig, but only the reserved account which will be unreserved on AH. ## Messaging Logic The messaging is ACK based. The Relay sends message to Asset Hub up to a specified limit (50). The limit can be adjusted on the fly through a dedicated dispatchable call, restricted to Admin and Manager roles. The limit may be overstepped by the configured batch-size (10), so in total there should never be more than 60 DMPs queued. Each DMP is set to at most [50KB](https://github.com/polkadot-fellows/runtimes/blob/8ef1cc739d756b109dc93eaf3b9da00e3dcf1383/pallets/rc-migrator/src/lib.rs#L131). The Relay Chain migrator creates a query for each XCM data message using the XCM query–response primitives and attaches a response status request from Asset Hub to the message. The XCM executor on Asset Hub then sends back the response status for every message with such a request. The Relay migrator stores each data message sent to Asset Hub until it receives confirmation of successful processing. It also provides a dispatchable call, available only to Admin and Manager roles, to resend any unconfirmed messages. A bug that prevented certain messages from being accounted for during a particulat pallet migration caused the Westend AHM stall. The system was queuing too many DMPs, which forced WAH to author an overweight block while attempting to process them all at once. ## Call Filtering Pallet calls are filtered during the migration for three reasons: - prevent malicious users from spamming the chain with cheap TX and slowing down the migration - prevent users from sending many UMPs out of AH to clog up the UMP queue - prevent interference with pallets that are being migrated to avoid messing up their storage invariants Both RC and AH provide call filters for `Before`, `During` and `After` the migration. As you can see, most things are disabled during the migration on both chains. After the migration, Relay chain keeps pretty much everything disabled since it was now enabled on AH: - Before: RC everything enabled, AH all new pallets disabled (staking, gov etc) - During: RC mostly everything disabled, AH mostly everything disabled - After: RC mostly everything disabled (staking, gov etc), AH everything enabled (staking, gov etc) This is implemented by returning three bools, one for each phase: https://github.com/polkadot-fellows/runtimes/blob/88f4aaf62236fbee9cfb9183e44333bac45b1371/system-parachains/asset-hubs/asset-hub-polkadot/src/ah_migration/call_filter.rs#L81-L83 ## Testing and Dry-Runs https://github.com/paritytech/ahm-dryrun is the repository for testing infrastructure for AHM. As of now, the following is being tested there (as a part of "[AHM Flow (all steps)](https://github.com/paritytech/ahm-dryrun/actions/workflows/zombie-bite.yml)" nightly action): * Dry-running a migration on a fork of Kusama * Re-running the rust unit tests introduced in this branch * Re-running a subset of the same tests, re-written in TS * Re-running PET tests. Each action produces a table with the summary of the test results: <img width="682" height="357" alt="Screenshot 2025-09-19 at 09 03 20" src="https://github.com/user-attachments/assets/69c1e37d-6f8f-4b57-b97f-75781a1e1a3a" /> And 4 snapshot files (2 real databases, 2 try-runtime snapshots) which can be used to re-run any of the tests, or run the pre/post migration chain, locally. <img width="1347" height="476" alt="Screenshot 2025-09-19 at 09 03 40" src="https://github.com/user-attachments/assets/127cbf76-b2fb-467f-8fef-3e93a9a709f6" /> <details><summary>Full Changelog</summary> <p> - **[AHM] OpenGov for Kusama AH (#877)** - **Relay Chain Accounts to Asset Hub Migration (#515)** - **Test Relay<->AH migration through DMP messages (#528)** - **[AHM] Improve account migration (#532)** - **[AHM] Add multisig migration (#534)** - **[AHM] Proxy migration (#542)** - **[AHM] Cleanup and add Preimage doc (#543)** - **[AHM] Improve accounts migration (#550)** - **[AHM] Preimage migration (#545)** - **[AHM] Add Polkadot call filtering (#559)** - **[AHM] Nomination pools (#562)** - **[AHM] referenda pallet (#558)** - **[AHM] Cleanup (#565)** - **[AHM] Scheduler Pallet (#569)** - **[AHM] Fast unstake and Bags list (#563)** - **[AHM] Pallet claims (#570)** - **[AHM] Conviction Voting Pallet (#578)** - **[AHM] Pallet Indices (#577)** - **[AHM] pause scheduler during migration (#580)** - **[AHM] Asset rate pallet migration (#581)** - **[AHM] Bounties data migration (#585)** - **[AHM] Vesting (#575)** - **[AHM] fix the rc-migrator call filter (#598)** - **[AHM] Sovereign Account Translation (#594)** - **[AHM] Crowdloans (#592)** - **[AHM] Set up AH migration testing framework for single pallets (#597)** - **[AHM] Stage management (#584)** - **[AHM] Do not pause inherents 🙈 (#609)** - **[AHM] Relay Chain accounts' reserves (#602)** - **[AHM] Benchmarks (#589)** - **[AHM] Pallet testing framework (#612)** - **[AHM] fix xcm weight at most (#617)** - **[AHM] Improve weight accounting for accounts migration (#618)** - **[AHM] AH acks messages from RC (#620)** - **[AHM] Pure Proxy Investigation (#621)** - **[AHM] Remove migrated items for pallet preimage and improve testing (#619)** - **[AHM] Referenda metadata (#633)** - **[AHM] Fix accounts migration failures (#628)** - **[AHM] refactor events and enable scheduled migration start (#634)** - **[AHM] Migrating DOT total issuance tracking from RC to AH (#607)** - **[AHM] Comment faulty checks out (#640)** - **Account migrator refactor (#639)** - **[AHM] Rebase (#641)** - **[AHM] Run AHM test in CI (#642)** - **[AHM] Vesting test (#615)** - **[AHM] bags_list and conviction_voting tests (#632)** - **[AHM] Treasury pallet migration (#624)** - **[AHM] Fix tests for pallet preimage (#643)** - **[AHM] Test Coverage Report (#650)** - **[AHM] deactivate/reactivate total issuance & weights (#648)** - **[AHM] add sudo behind feature flag (#657)** - **[AHM] fast_unstake tests (#658)** - **[AHM] asset_rate test (#660)** - **[AHM] Pallet treasury tests (#664)** - **[AHM] Improve account balances integration tests (#655)** - **[AHM] Integrate AH migrator weights to RC (#665)** - **Testing for bounties migration (#669)** - **[AHM] Westend port adapters (#652)** - **[AHM] fix checking account and total issuance migration (#636)** - **[AHM] Bump polkadot relay and AH versions (#667)** - **[AHM] Fix tests for pallet treasury (#671)** - **[AHM] Claims and Crowdloan tests (#622)** - **[AHM] Benchmarks (#663)** - **[AHM] Add Asset Hub CallFilter (#670)** - **[AHM] Westend staking migration (#689)** - **[AHM] Referenda migration storage checks (#672)** - **[AHM] AH benchmarks cleanup (#690)** - **[AHM] Westend Async Staking Migration (#691)** - **[AHM] Relay Chain migrator benchmarks (#692)** - **[AHM] Asset Hub ops pallet benchmarks (#693)** - **[AHM] Xcm send weights and Batch helper types (#694)** - **Finish staking Westend (#695)** - **[AHM] Account provider/consumer references (#702)** - **[AHM] Fix westend builds (#704)** - **[AHM] Generate weights (#706)** - **[AHM] Proxy fixes and more tests (#707)** - **[AHM] Docs and simpler events (#699)** - **[AHM] Test call decoding (#710)** - **[AHM] Emulated test for migration with async backing (#717)** - **[AHM] Increase test coverage (#720)** - **[AHM] Add referenda checks to Westend migration (#713)** - **[AHM] Nom_pools test (#677)** - **[AHM] Scheduler storage item checks (#680)** - **[AHM] Update Polkadot Snapshot (#725)** - **[AHM] Pallet multisig tests (#666)** - **[AHM] Adapt XCM configuration to account for changes before and after migration (#722)** - **[AHM] document checking account migration (#716)** - **[AHM] Dependency fixes for integration tests and the Polkadot runtime (#751)** - **[AHM] Remove empty conviction voting filter (#750)** - **[AHM] Missing TODOs and `AccountState` type update (#742)** - **[AHM] DMP prioritization on AH (#772)** - **[AHM] Disable #[pallet::hooks] for migrating pallets during migration (#784)** - **[AHM] AH messages prioritization on RC (#787)** - **[AHM] Cache test snapshots and include more tests into CI job (#788)** - **[AHM] Cleanup Westend feature (#789)** - **[AHM] Introducing the Cool-Off stage (#786)** - **[AHM] Flow Control System (#780)** - **[AHM] Migrate pallet delegated-staking to AH (#791)** - **[AHM] Merge master into dev branch (#793)** - **[AHM] Disable indirect XCMs from RC to AH and vice versa during migration (#774)** - **Rebase** - **bring back RelayTreasuryLocation to make old tests compiole** - **[AHM] Missing `RootLocation` for WaivedLocation for AHP (#798)** - **[AHM] Missing `SecretaryEntities` for AHP (#797)** - **[AHM] Migration idempotency (#808)** - **[AHM] Block number providers for migrating pallets (#809)** - **[AHM] Copy latest ah-ops pallet from the SDK (#810)** - **[AHM / ah-migrator]: Implement RC->AH account translation `mocked` migration across all involved pallets (#807)** - **[AHM] Complete account balances tests (#674)** - **[AHM] Address TODOs (#815)** - **[AHM] Async staking config (#812)** - **[AHM] Optional migration manager account id (#818)** - **[AHM] Type safe Hold and Freeze-Reason translation (#819)** - **[AHM] Create new response query on resend and tests (#816)** - **PolkadotAssetHub: Enable Async Backing (#763)** - **Ensure no era planned when migration starts (#728)** - **[AHM] with async backing (#822)** - **[AHM] Staking migration (#821)** - **identify with only validator account** - **[AHM] Tests work for Paseo (#827)** - **[AHM] Child bounties (#613)** - **[AHM] Cleanup and linter fixes (#828)** - **[AHM] Fix snowbridge test - wrong import of `RelayTreasuryPalletAccount` (instead of AH, it should be BH) (#831)** - **[AHM] Account Translation mapping (#829)** - **Fast unstake: remove alias** - **fmt** - **[AHM] Max migrated items per block (#834)** - **[AHM] Record migration timings (#835)** - **[AHM] Remove storage aliases and cleanup (#832)** - **[AHM] fix Kusama bags list pallet benchmarks (#836)** - **[AHM] Unprocessed msg buffer size 50 (#839)** - **[AHM] Post migration cool off stage (#841)** - **[AHM] Multisig test and storage_alias cleanup (#842)** - **[AHM] Remove fast-unstake and test fixes (#846)** - **Run try-state check for all pallets post AHM rust tests (#833)** - **[AHM] Preserve on RC manager' account (#843)** - **[AHM] Filter staking calls before migration starts (#847)** - **[AHM] State Decode Tests (#848)** - **[AHM] Send xcm extrinsic within migrator pallets (#851)** - **Merge and cleanup merge commit** - #845 - #852 - #862 - #875 - #872 - #877 - #626 - #879 - #885 - #886 - #882 - #883 - #854 - #888 - #895 - #892 - #896 - #889 </p> </details> // only to let all CIs to execute for now - [ ] Does not require a CHANGELOG entry --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> Signed-off-by: Adrian Catangiu <[email protected]> Signed-off-by: Andrei Sandu <[email protected]> Signed-off-by: Alexandru Vasile <[email protected]> Co-authored-by: Muharem <[email protected]> Co-authored-by: Dónal Murray <[email protected]> Co-authored-by: Adrian Catangiu <[email protected]> Co-authored-by: Giuseppe Re <[email protected]> Co-authored-by: Andrii <[email protected]> Co-authored-by: Bastian Köcher <[email protected]> Co-authored-by: Yuri Volkov <[email protected]> Co-authored-by: s0me0ne-unkn0wn <[email protected]> Co-authored-by: Kian Paimani <[email protected]> Co-authored-by: Branislav Kontur <[email protected]> Co-authored-by: GitHub Action <[email protected]> Co-authored-by: Francisco Aguirre <[email protected]> Co-authored-by: fellowship-merge-bot[bot] <151052383+fellowship-merge-bot[bot]@users.noreply.github.com> Co-authored-by: Pablo Andrés Dorado Suárez <[email protected]> Co-authored-by: ordian <[email protected]> Co-authored-by: Alistair Singh <[email protected]> Co-authored-by: Sergej Sakac <[email protected]> Co-authored-by: Bastian Köcher <[email protected]> Co-authored-by: Serban Iorga <[email protected]> Co-authored-by: Xiliang Chen <[email protected]> Co-authored-by: Nikolai Kozlov <[email protected]> Co-authored-by: nkprt <[email protected]> Co-authored-by: Eugenio Paluello <[email protected]> Co-authored-by: Javier Viola <[email protected]> Co-authored-by: polka.dom <[email protected]> Co-authored-by: Dónal Murray <[email protected]> Co-authored-by: Karol Kokoszka <[email protected]> Co-authored-by: joe petrowski <[email protected]> Co-authored-by: Clara van Staden <[email protected]> Co-authored-by: Ankan <[email protected]> Co-authored-by: clangenb <[email protected]> Co-authored-by: Andrei Sandu <[email protected]> Co-authored-by: Andrei Sandu <[email protected]> Co-authored-by: Alexandre Baldé <[email protected]> Co-authored-by: Maksym H <[email protected]> Co-authored-by: Alin Dima <[email protected]> Co-authored-by: Alexander Theißen <[email protected]> Co-authored-by: Christian Langenbacher <[email protected]> Co-authored-by: Ankan <[email protected]> Co-authored-by: Karol Kokoszka <[email protected]> Co-authored-by: brenzi <[email protected]> Co-authored-by: Doordashcon <[email protected]> Co-authored-by: eskimor <[email protected]> Co-authored-by: Robert <[email protected]> Co-authored-by: Raymond Cheung <[email protected]> Co-authored-by: Maciej <[email protected]> Co-authored-by: Paolo La Camera <[email protected]> Co-authored-by: kianenigma <[email protected]> Co-authored-by: Alexandru Vasile <[email protected]> Co-authored-by: Alexander Cyon <[email protected]>

ggwpez added 3 commits January 23, 2025 18:24

[AHM] Add Polkadot call filtering

03d3a26

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

tabs

dea3572

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

fmt

4e6c0b2

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

ggwpez marked this pull request as ready for review January 23, 2025 17:27

ggwpez added 2 commits January 23, 2025 18:31

fix

989b88b

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

docs

0ae2492

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

seadanda reviewed Jan 24, 2025

View reviewed changes

muharem approved these changes Jan 27, 2025

View reviewed changes

ggwpez and others added 3 commits January 27, 2025 12:30

Apply suggestions from code review

e4cecbf

Co-authored-by: Dónal Murray <[email protected]>

review suggestions

35ef687

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

Move migration stuff to own mod

258ff4f

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

ggwpez merged commit 952330a into dev-asset-hub-migration Jan 27, 2025
21 of 47 checks passed

ggwpez deleted the oty-ahm-pause-calls branch January 27, 2025 13:25

ggwpez mentioned this pull request Jan 28, 2025

[AHM] Misc Issues paritytech/polkadot-sdk#7369

Open

28 tasks

seadanda mentioned this pull request Aug 15, 2025

[AHM] Call filter configuration #845

Merged

ggwpez mentioned this pull request Aug 18, 2025

THE ASSET HUB MIGRATION (Please Review) #856

Merged

1 task

	Configuration(..) => (OFF, ON),
	Configuration(..) => (ON, ON),

[AHM] Add Polkadot call filtering #559

[AHM] Add Polkadot call filtering #559

Uh oh!

Conversation

ggwpez commented Jan 23, 2025

Uh oh!

seadanda left a comment

Choose a reason for hiding this comment

Uh oh!

Uh oh!

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

ggwpez Jan 27, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Uh oh!

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Choose a reason for hiding this comment

Uh oh!

Uh oh!

Uh oh!

Uh oh!

ggwpez commented Jan 27, 2025

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

4 participants

ggwpez Jan 27, 2025 •

edited

Loading