diff --git a/config/jobs/image-pushing/k8s-staging-csi-gen.sh b/config/jobs/image-pushing/k8s-staging-csi-gen.sh
new file mode 100755
index 000000000000..6d6d4032eee6
--- /dev/null
+++ b/config/jobs/image-pushing/k8s-staging-csi-gen.sh
@@ -0,0 +1,66 @@
+#! /bin/bash -e
+# Copyright 2020 The Kubernetes Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+output="$(dirname $0)/k8s-staging-csi.yaml"
+repos="
+csi-driver-host-path
+csi-test
+external-attacher
+external-provisioner
+external-resizer
+external-snapshotter
+livenessprobe
+node-driver-registrar
+"
+
+cat >"$output" <<EOF
+# Automatically generated by k8s-staging-csi-gen.sh.
+
+postsubmits:
+EOF
+
+for repo in $repos; do
+    cat >>"$output" <<EOF
+  kubernetes-csi/$repo:
+    - name: post-$repo-push-images
+      cluster: k8s-infra-prow-build-trusted
+      annotations:
+        testgrid-dashboards: sig-storage-csi-$repo
+      decorate: true
+      branches:
+        # For publishing canary images. Publishing canary images for release branches can
+        # be added later, but then will depend on which release branches in each repo have
+        # the necessary cloud build files.
+        - ^master$
+        # This is a regex for semver, from https://semver.org/#is-there-a-suggested-regular-expression-regex-to-check-a-semver-string.
+        # This is okay for upcoming releases, but old releases will not have the necessary cloud build
+        # files and thus the job will fail.
+        - ^v(0|[1-9]\d*)\.(0|[1-9]\d*)\.(0|[1-9]\d*)(?:-((?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*)(?:\.(?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*))*))?(?:\+([0-9a-zA-Z-]+(?:\.[0-9a-zA-Z-]+)*))?$
+      spec:
+        serviceAccountName: gcb-builder
+        containers:
+          - image: gcr.io/k8s-testimages/image-builder:v20200422-c760048
+            command:
+              - /run.sh
+            args:
+              # this is the project GCB will run in, which is the same as the GCR
+              # images are pushed to.
+              - --project=k8s-staging-csi
+              # This is the same as above, but with -gcb appended.
+              - --scratch-bucket=gs://k8s-staging-csi-gcb
+              - --env-passthrough=PULL_BASE_REF
+              - .
+EOF
+done
diff --git a/config/jobs/image-pushing/k8s-staging-csi.yaml b/config/jobs/image-pushing/k8s-staging-csi.yaml
index 6bd03f320984..28a1b0d52699 100644
--- a/config/jobs/image-pushing/k8s-staging-csi.yaml
+++ b/config/jobs/image-pushing/k8s-staging-csi.yaml
@@ -1,18 +1,223 @@
+# Automatically generated by k8s-staging-csi-gen.sh.
+
 postsubmits:
-  # This is the github repo we'll build from. This block needs to be repeated
-  # for each repo.
+  kubernetes-csi/csi-driver-host-path:
+    - name: post-csi-driver-host-path-push-images
+      cluster: k8s-infra-prow-build-trusted
+      annotations:
+        testgrid-dashboards: sig-storage-csi-csi-driver-host-path
+      decorate: true
+      branches:
+        # For publishing canary images. Publishing canary images for release branches can
+        # be added later, but then will depend on which release branches in each repo have
+        # the necessary cloud build files.
+        - ^master$
+        # This is a regex for semver, from https://semver.org/#is-there-a-suggested-regular-expression-regex-to-check-a-semver-string.
+        # This is okay for upcoming releases, but old releases will not have the necessary cloud build
+        # files and thus the job will fail.
+        - ^v(0|[1-9]\d*)\.(0|[1-9]\d*)\.(0|[1-9]\d*)(?:-((?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*)(?:\.(?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*))*))?(?:\+([0-9a-zA-Z-]+(?:\.[0-9a-zA-Z-]+)*))?$
+      spec:
+        serviceAccountName: gcb-builder
+        containers:
+          - image: gcr.io/k8s-testimages/image-builder:v20200422-c760048
+            command:
+              - /run.sh
+            args:
+              # this is the project GCB will run in, which is the same as the GCR
+              # images are pushed to.
+              - --project=k8s-staging-csi
+              # This is the same as above, but with -gcb appended.
+              - --scratch-bucket=gs://k8s-staging-csi-gcb
+              - --env-passthrough=PULL_BASE_REF
+              - .
+  kubernetes-csi/csi-test:
+    - name: post-csi-test-push-images
+      cluster: k8s-infra-prow-build-trusted
+      annotations:
+        testgrid-dashboards: sig-storage-csi-csi-test
+      decorate: true
+      branches:
+        # For publishing canary images. Publishing canary images for release branches can
+        # be added later, but then will depend on which release branches in each repo have
+        # the necessary cloud build files.
+        - ^master$
+        # This is a regex for semver, from https://semver.org/#is-there-a-suggested-regular-expression-regex-to-check-a-semver-string.
+        # This is okay for upcoming releases, but old releases will not have the necessary cloud build
+        # files and thus the job will fail.
+        - ^v(0|[1-9]\d*)\.(0|[1-9]\d*)\.(0|[1-9]\d*)(?:-((?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*)(?:\.(?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*))*))?(?:\+([0-9a-zA-Z-]+(?:\.[0-9a-zA-Z-]+)*))?$
+      spec:
+        serviceAccountName: gcb-builder
+        containers:
+          - image: gcr.io/k8s-testimages/image-builder:v20200422-c760048
+            command:
+              - /run.sh
+            args:
+              # this is the project GCB will run in, which is the same as the GCR
+              # images are pushed to.
+              - --project=k8s-staging-csi
+              # This is the same as above, but with -gcb appended.
+              - --scratch-bucket=gs://k8s-staging-csi-gcb
+              - --env-passthrough=PULL_BASE_REF
+              - .
+  kubernetes-csi/external-attacher:
+    - name: post-external-attacher-push-images
+      cluster: k8s-infra-prow-build-trusted
+      annotations:
+        testgrid-dashboards: sig-storage-csi-external-attacher
+      decorate: true
+      branches:
+        # For publishing canary images. Publishing canary images for release branches can
+        # be added later, but then will depend on which release branches in each repo have
+        # the necessary cloud build files.
+        - ^master$
+        # This is a regex for semver, from https://semver.org/#is-there-a-suggested-regular-expression-regex-to-check-a-semver-string.
+        # This is okay for upcoming releases, but old releases will not have the necessary cloud build
+        # files and thus the job will fail.
+        - ^v(0|[1-9]\d*)\.(0|[1-9]\d*)\.(0|[1-9]\d*)(?:-((?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*)(?:\.(?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*))*))?(?:\+([0-9a-zA-Z-]+(?:\.[0-9a-zA-Z-]+)*))?$
+      spec:
+        serviceAccountName: gcb-builder
+        containers:
+          - image: gcr.io/k8s-testimages/image-builder:v20200422-c760048
+            command:
+              - /run.sh
+            args:
+              # this is the project GCB will run in, which is the same as the GCR
+              # images are pushed to.
+              - --project=k8s-staging-csi
+              # This is the same as above, but with -gcb appended.
+              - --scratch-bucket=gs://k8s-staging-csi-gcb
+              - --env-passthrough=PULL_BASE_REF
+              - .
+  kubernetes-csi/external-provisioner:
+    - name: post-external-provisioner-push-images
+      cluster: k8s-infra-prow-build-trusted
+      annotations:
+        testgrid-dashboards: sig-storage-csi-external-provisioner
+      decorate: true
+      branches:
+        # For publishing canary images. Publishing canary images for release branches can
+        # be added later, but then will depend on which release branches in each repo have
+        # the necessary cloud build files.
+        - ^master$
+        # This is a regex for semver, from https://semver.org/#is-there-a-suggested-regular-expression-regex-to-check-a-semver-string.
+        # This is okay for upcoming releases, but old releases will not have the necessary cloud build
+        # files and thus the job will fail.
+        - ^v(0|[1-9]\d*)\.(0|[1-9]\d*)\.(0|[1-9]\d*)(?:-((?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*)(?:\.(?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*))*))?(?:\+([0-9a-zA-Z-]+(?:\.[0-9a-zA-Z-]+)*))?$
+      spec:
+        serviceAccountName: gcb-builder
+        containers:
+          - image: gcr.io/k8s-testimages/image-builder:v20200422-c760048
+            command:
+              - /run.sh
+            args:
+              # this is the project GCB will run in, which is the same as the GCR
+              # images are pushed to.
+              - --project=k8s-staging-csi
+              # This is the same as above, but with -gcb appended.
+              - --scratch-bucket=gs://k8s-staging-csi-gcb
+              - --env-passthrough=PULL_BASE_REF
+              - .
+  kubernetes-csi/external-resizer:
+    - name: post-external-resizer-push-images
+      cluster: k8s-infra-prow-build-trusted
+      annotations:
+        testgrid-dashboards: sig-storage-csi-external-resizer
+      decorate: true
+      branches:
+        # For publishing canary images. Publishing canary images for release branches can
+        # be added later, but then will depend on which release branches in each repo have
+        # the necessary cloud build files.
+        - ^master$
+        # This is a regex for semver, from https://semver.org/#is-there-a-suggested-regular-expression-regex-to-check-a-semver-string.
+        # This is okay for upcoming releases, but old releases will not have the necessary cloud build
+        # files and thus the job will fail.
+        - ^v(0|[1-9]\d*)\.(0|[1-9]\d*)\.(0|[1-9]\d*)(?:-((?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*)(?:\.(?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*))*))?(?:\+([0-9a-zA-Z-]+(?:\.[0-9a-zA-Z-]+)*))?$
+      spec:
+        serviceAccountName: gcb-builder
+        containers:
+          - image: gcr.io/k8s-testimages/image-builder:v20200422-c760048
+            command:
+              - /run.sh
+            args:
+              # this is the project GCB will run in, which is the same as the GCR
+              # images are pushed to.
+              - --project=k8s-staging-csi
+              # This is the same as above, but with -gcb appended.
+              - --scratch-bucket=gs://k8s-staging-csi-gcb
+              - --env-passthrough=PULL_BASE_REF
+              - .
+  kubernetes-csi/external-snapshotter:
+    - name: post-external-snapshotter-push-images
+      cluster: k8s-infra-prow-build-trusted
+      annotations:
+        testgrid-dashboards: sig-storage-csi-external-snapshotter
+      decorate: true
+      branches:
+        # For publishing canary images. Publishing canary images for release branches can
+        # be added later, but then will depend on which release branches in each repo have
+        # the necessary cloud build files.
+        - ^master$
+        # This is a regex for semver, from https://semver.org/#is-there-a-suggested-regular-expression-regex-to-check-a-semver-string.
+        # This is okay for upcoming releases, but old releases will not have the necessary cloud build
+        # files and thus the job will fail.
+        - ^v(0|[1-9]\d*)\.(0|[1-9]\d*)\.(0|[1-9]\d*)(?:-((?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*)(?:\.(?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*))*))?(?:\+([0-9a-zA-Z-]+(?:\.[0-9a-zA-Z-]+)*))?$
+      spec:
+        serviceAccountName: gcb-builder
+        containers:
+          - image: gcr.io/k8s-testimages/image-builder:v20200422-c760048
+            command:
+              - /run.sh
+            args:
+              # this is the project GCB will run in, which is the same as the GCR
+              # images are pushed to.
+              - --project=k8s-staging-csi
+              # This is the same as above, but with -gcb appended.
+              - --scratch-bucket=gs://k8s-staging-csi-gcb
+              - --env-passthrough=PULL_BASE_REF
+              - .
+  kubernetes-csi/livenessprobe:
+    - name: post-livenessprobe-push-images
+      cluster: k8s-infra-prow-build-trusted
+      annotations:
+        testgrid-dashboards: sig-storage-csi-livenessprobe
+      decorate: true
+      branches:
+        # For publishing canary images. Publishing canary images for release branches can
+        # be added later, but then will depend on which release branches in each repo have
+        # the necessary cloud build files.
+        - ^master$
+        # This is a regex for semver, from https://semver.org/#is-there-a-suggested-regular-expression-regex-to-check-a-semver-string.
+        # This is okay for upcoming releases, but old releases will not have the necessary cloud build
+        # files and thus the job will fail.
+        - ^v(0|[1-9]\d*)\.(0|[1-9]\d*)\.(0|[1-9]\d*)(?:-((?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*)(?:\.(?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*))*))?(?:\+([0-9a-zA-Z-]+(?:\.[0-9a-zA-Z-]+)*))?$
+      spec:
+        serviceAccountName: gcb-builder
+        containers:
+          - image: gcr.io/k8s-testimages/image-builder:v20200422-c760048
+            command:
+              - /run.sh
+            args:
+              # this is the project GCB will run in, which is the same as the GCR
+              # images are pushed to.
+              - --project=k8s-staging-csi
+              # This is the same as above, but with -gcb appended.
+              - --scratch-bucket=gs://k8s-staging-csi-gcb
+              - --env-passthrough=PULL_BASE_REF
+              - .
   kubernetes-csi/node-driver-registrar:
-    # The name should be changed to match the repo name above
     - name: post-node-driver-registrar-push-images
       cluster: k8s-infra-prow-build-trusted
       annotations:
-        # This is the name of some testgrid dashboard to report to.
         testgrid-dashboards: sig-storage-csi-node-driver-registrar
       decorate: true
       branches:
-        # For publishing canary images
+        # For publishing canary images. Publishing canary images for release branches can
+        # be added later, but then will depend on which release branches in each repo have
+        # the necessary cloud build files.
         - ^master$
-        # this is a regex for semver, from https://semver.org/#is-there-a-suggested-regular-expression-regex-to-check-a-semver-string
+        # This is a regex for semver, from https://semver.org/#is-there-a-suggested-regular-expression-regex-to-check-a-semver-string.
+        # This is okay for upcoming releases, but old releases will not have the necessary cloud build
+        # files and thus the job will fail.
         - ^v(0|[1-9]\d*)\.(0|[1-9]\d*)\.(0|[1-9]\d*)(?:-((?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*)(?:\.(?:0|[1-9]\d*|\d*[a-zA-Z-][0-9a-zA-Z-]*))*))?(?:\+([0-9a-zA-Z-]+(?:\.[0-9a-zA-Z-]+)*))?$
       spec:
         serviceAccountName: gcb-builder