Using 2nd Harddrive

WANT TO HELP? CLICK THE ★ (STAR LOGO) in the Upper-Right!

• 📂 [Click Here] - Google G-Suite (Unlimited Hard Drive Space & Storage)
• 📂 [Click Here] - Top Performance NewsHost! - Blitz Members Receive a 58% Discount

---

Reference Shortcut - http://secondhd.pgblitz.com | Discord ( !secondhd )

---

** Outdated **

** Dont used it please

Table of Contents

1. Intro
2. Creating a file partition
3. Create the secondary mount
4. edit fstab
5. Create the folder for mounting
6. use the symlink
7. use mount bind
8. shell script for crontab
9. Troubleshooting

---

1. Intro

Situation:

Have a 250GB SSD and a second 2TB harddrive? The problem that you'll run into with PlexGuide is that all of your stuff downloading and uploading will target your PRIMARY DRIVE (in this example, the 250GB SSD).

The following instructions will assist you in SETTING up your second harddrive.

To check, type df -h and if you notice your OTHER HD not there, you need to follow the steps below.

/// PICTURE HERE ///

---

2. Creating a file partition

fdisk -l

Pay attention to the name of the new disk

type fdisk name-of-drive (mine was /dev/sdb)

m - print menu

if there is a valid partition, you can delete it with d

n - add new partition

p - to create a primary partition

1 - choose number of partition (pick only 1)

Press enter twice

press w to write to disk and exit

create a file system

mkfs.ext4 /dev/sdb -- keep pushing enter until done

---

3. Create the secondary mount

Now we can create the folder for the secondary drive, the best options is this one.

mkdir /mnt/media

---

4. edit fstab

What is fstab ??

short explain about fstab,

Fstab is your operating system’s file system table. In the old days, it was the primary way that the system mounted files automatically. Nowadays, you can plug in a USB drive of any kind and it’ll just pop up in Nautilus like it does in Windows and Mac OS, but once upon a time, you had to manually mount those disks to a specific folder using the “mount” command. This held true for DVDs, CDs, and even floppies (remember those?).

Back then, your only alternative was the tell the computer that anytime a specific device was plugged in, it should be automatically mounted in a specific place. This is where fstab came in, and it was awesome. Suppose you swapped hard disks on your IDE or SCSI controller. The computer could load the file systems in a different order, potentially messing things up. Fstab is configured to look for specific file systems and mount them automatically in a desired way each and every time, preventing a myriad of disasters from occurring.

type blkid

• look for the name of device you're loooking for, mine was /dev/sdb

copy the uuid number

/dev/sdb: UUID="707cf076-5656-4b07-a062-989df6813fa3" TYPE="ext4"

type: nano /etc/fstab

Enter at the bottom of the file:

UUID="707cf076-5656-4b07-a062-989df6813fa3" /mnt/media ext4 defaults 0 0

(edit the UUID with the UUID of your harddrive you found earlier)

ctrl + x to save

type: sudo reboot or mount -a

then

type: mount /mnt/media

---

5. Create the folder for mounting

now we can creat and remove the old folder (link symlink) if you want to bind the folder you need only to create the folder

 sudo mkdir /mnt/media/move

---

6. use the symlink

short explain about Symlink

Well, ln -s creates a symbolic link, whereas mount --bind creates a mount.

A symbolic link is a special type of file. If you do ln -s /var/target /var/link, then /var/link will be a file containing the path "/var/target" in it. The only difference between a symbolic link and an ordinary file is that when a program tries to perform an operation on a symbolic link, the operation is usually performed on the target instead of the file. So now if you do ls /var/link, the ls program will try to get a directory listing for /var/link, but will actually get a directory listing for /var/target instead.

If you want to use the symlink variante , please use the follow commands.

first we create the folder for the symlink

sudo mkdir /mnt/media/move

and now we create the symlink

sudo ln -s /mnt/media/move /mnt/move

and finish

if you want to test the symlink type the follow command

df -h /mnt/move

it will show you the empty space ;-)

---

7. use mount bind

the other option are mount --bind

short explain

A bind mount is an alternate view of a directory tree. Classically, mounting creates a view of a storage device as a directory tree. A bind mount instead takes an existing directory tree and replicates it under a different point. The directories and files in the bind mount are the same as the original

use the follow commands for this

mount --bind /mnt/media/move /mnt/move

now the bind is done,

if you want to test is

df -h /mnt/move 

the next step is, we give the user the permissions back to creat files and deleted files.

chown -cR user-name:user-name /mnt/move

// edit user-name to your username //

and the bind and the permission are finish ,but if you reboot your server you must repeat the step.

normaly Linux don't need a reboot , but sometimes we need a reboot. but linux are not stupid we can use the follow script,

---

8. shell script

Please :!: do all this as root member , not as User.

Mount options can only change Root.

Step 1.)

apt-get install nano && cd &&  nano mount.sh

Step 2.) Only change this part = user-name:user-name to your user name

#!/bin/bash
##mount options

mount --bind /mnt/media/move /mnt/move

chown -cR user-name:user-name /mnt/move

exit 0

and save CTRG + X and Y

Step 3 .)

crontab -e

Step 4.) go to the end of the list ( press page-down )

@reboot bash /root/mount.sh >/dev/null 2>&1

if you follow this steps correctly , now the secondary HDD is hardmountet over "/mnt/move"

---

9. Troubleshooting

Q1.) the secondary HDD is not mounten over /mnt/move

A1.) The biggest Problem is , you have to forgotten to change your Username, please check:

/// cat /root/mount.sh

see the line -->>

"" chown -cR user-name:user-name /mnt/move ""

Q2.) Who can i check it ?

A2.) you can check it so ->> ""df -h /mnt/move ""

Q3.) After reboot the script mounte the secondary HDD not correctly :!:

A3.) Please check this --

"crontab -e"

If you add the crotab as User you donˋt canˋt mount as User. The mount options are only for root.

Please checck this double.

Q4.) ..""..

If you need help go to this Thread ;

mount --bind

If you this like this ; Follow as 👍

Visit our Website By Click the Picture Below!