multisensor.yaml

esphome:
  name: multisensor1
  platform: ESP32
  board: esp32dev
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  
logger:
api:
ota:
captive_portal:

substitutions:
  friendly_name: multisensor1
  
text_sensor:
  # Send IP Address
  - platform: wifi_info
    ip_address:
      name: $friendly_name IP Address

  # Send Uptime in raw seconds
  - platform: template
    name: $friendly_name Uptime
    id: uptime_human
    icon: mdi:clock-start

i2c:
  # defaults

# Sensors that the ESPhome unit is capable of reporting
sensor:
  - platform: wifi_signal
    name: $friendly_name WiFi Signal
    update_interval: 60s

  # https://esphome.io/components/sensor/tsl2591.html
  - platform: tsl2591
    name: "Ambient Light Sensor"
    id: "tls2591"
    # address: 0x29 # default
    update_interval: 30s
    # device_factor: 53
    # glass_attenuation_factor: 14.4
    # visible:
    #   name: "TSL2591 visible light"
    # infrared:
    #   name: "TSL2591 infrared light"
    # full_spectrum:
    #   name: "TSL2591 full spectrum light"
    calculated_lux:
      id: i_lux
      name: "TSL2591 Lux"

  # https://esphome.io/components/sensor/bme280.html
  - platform: bme280
    temperature:
      name: "BME280 Temperature"
      accuracy_decimals: 3
    pressure:
      name: "BME280 Pressure"
      accuracy_decimals: 3
      filters:
        - offset: 15.4
    humidity:
      name: "BME280 Humidity"
      accuracy_decimals: 3
    address: 0x76
    update_interval: 60s

  - platform: uptime
    internal: true
    id: uptime_sensor
    update_interval: 60s
    on_raw_value:
      then:
        - text_sensor.template.publish:
            id: uptime_human
            # Custom C++ code to generate the result
            state: !lambda |-
              int seconds = round(id(uptime_sensor).raw_state);
              int days = seconds / (24 * 3600);
              seconds = seconds % (24 * 3600);
              int hours = seconds / 3600;
              seconds = seconds % 3600;
              int minutes = seconds /  60;
              seconds = seconds % 60;
              return (
                (days ? to_string(days) + "d " : "") +
                (hours ? to_string(hours) + "h " : "") +
                (minutes ? to_string(minutes) + "m " : "") +
                (to_string(seconds) + "s")
              ).c_str();

switch:
  - platform: restart
    id: restart1
    name: $friendly_name ESP32 Restart

time:
  - platform: homeassistant
    on_time:
      # Every morning at 12:30am
      - seconds: 0
        minutes: 30
        hours: 0
        then:
          - switch.turn_on: restart1

# binary_sensor:  
  # # Enables the SW-420 Vibration Sensor
  # - platform: gpio  
  #   name: $friendly_name Vibration Sensor
  #   pin:
  #     number: GPIO32
  #     mode: INPUT
  #   device_class: vibration
  #   filters:
  #    - delayed_on: 10ms
  #    - delayed_off: 5sec

  # - platform: gpio
  #   pin: GPIO33
  #   name: $friendly_name PIR Sensor
  #   device_class: motion