-
Notifications
You must be signed in to change notification settings - Fork 87
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
OneWireHub on ESP32 PROBLEM #102
Comments
Hi, I did have the same issue and tried so many options to get this working. error: call to non-constexpr function 'uint32_t getCpuFrequencyMhz()' So looking into I found the difference in the following line and here is the SOLUTION: Open File: Thats it now it compiles without errors. -e |
I ran into this problem trying to get OneWireHub running on a ESP32. Although the change mentioned does allow the code to compile I cannot get it to work on a ESP32 (2 different boards). If I switch to an old Arduino board the code and hardware works as expected but I need OneWireHub running on a ESP32 for it's WiFi. The Readme says this works with ESP32 but perhaps some changes have broken that ability? |
In the readme I saw this comment:
So I hooked up a scope and checked and I'm measuring a pulse at boot up of 1.3ms instead of 1ms with a ESP32 Dev Module: I tried to run the calibration but that just kept throwing panic errors. I have this hooked up to a master and I was under the impression that I should get more pulses but that's not happening, only the initial one during boot up. |
Hello oruga,
hello dear community.
I've only had electronics and coding for a few days and this is my first post on GitHub.
I have already successfully simulated several OneWire devices on a MEGA328 (Arduino NANO). All examples could be compiled without problems.
When trying to compile the examples for the "NODE MCU ESP-32S" board, I get a lot of error messages from the Arduino IDE.
Can someone help me and tell me exactly what steps I need to take to use the OneWireHub on an ESP 32?
Thanks so much. I hope for your help!
Have a nice Weekend!!!
Here are the error messages when trying to compile the example: "DS18B20_thermometer" for the board: "NODEMCU ESP-32S":
In file included from C:\Users\Daniel\AppData\Local\Temp\arduino_build_369790\sketch\DS18B20_thermometer.ino.cpp:1:0:
D:\Arduino\libraries\OneWireHub\src/OneWireHub.h: In function 'constexpr timeOW_t operator""_us(long long unsigned int)':
C:\Users\Daniel\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.0-rc2\cores\esp32/Arduino.h:82:67: error: call to non-constexpr function 'uint32_t getCpuFrequencyMhz()'
#define clockCyclesPerMicrosecond() ( (long int)getCpuFrequencyMhz() )
^
C:\Users\Daniel\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.0-rc2\cores\esp32/Arduino.h:84:46: note: in expansion of macro 'clockCyclesPerMicrosecond'
#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() )
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub.h:11:31: note: in expansion of macro 'microsecondsToClockCycles'
return timeOW_t(time_us * microsecondsToClockCycles(1) / VALUE_IPL); // note: microsecondsToClockCycles == speed in MHz....
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub.h: In function 'constexpr timeOW_t timeUsToLoops(uint16_t)':
C:\Users\Daniel\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.0-rc2\cores\esp32/Arduino.h:82:67: error: call to non-constexpr function 'uint32_t getCpuFrequencyMhz()'
#define clockCyclesPerMicrosecond() ( (long int)getCpuFrequencyMhz() )
^
C:\Users\Daniel\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.0-rc2\cores\esp32/Arduino.h:84:46: note: in expansion of macro 'clockCyclesPerMicrosecond'
#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() )
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub.h:19:23: note: in expansion of macro 'microsecondsToClockCycles'
return (time_us * microsecondsToClockCycles(1) / VALUE_IPL); // note: microsecondsToClockCycles == speed in MHz....
^
In file included from D:\Arduino\libraries\OneWireHub\src/OneWireHub.h:22:0,
from D:\Arduino\libraries\OneWireHub\examples\DS18B20_thermometer\DS18B20_thermometer.ino:9:
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h: At global scope:
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:27:59: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_RESET_TIMEOUT = { 5000_us }; // for not hanging to long in reset-detection, lower value is better for more responsive applications, but can miss resets
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:28:60: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_RESET_MIN[2] = { 430_us, 48_us }; // should be 480
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:28:68: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_RESET_MIN[2] = { 430_us, 48_us }; // should be 480
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:29:60: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_RESET_MAX[2] = { 960_us, 80_us }; // from ds2413
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:29:68: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_RESET_MAX[2] = { 960_us, 80_us }; // from ds2413
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:32:61: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_PRESENCE_TIMEOUT = { 20_us }; // probe measures 25us, duration of high state between reset and presence
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:33:60: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_PRESENCE_MIN[2] = { 160_us, 8_us }; // was 125
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:33:69: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_PRESENCE_MIN[2] = { 160_us, 8_us }; // was 125
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:34:60: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_PRESENCE_MAX[2] = { 480_us, 32_us }; // should be 280, was 480
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:34:68: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_PRESENCE_MAX[2] = { 480_us, 32_us }; // should be 280, was 480
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:37:58: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_MSG_HIGH_TIMEOUT = { 15000_us }; // there can be these inactive / high timeperiods after reset / presence, this value defines the timeout for these
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:38:60: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_SLOT_MAX[2] = { 135_us, 30_us }; // should be 120, measured from falling edge to next falling edge
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:38:68: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_SLOT_MAX[2] = { 135_us, 30_us }; // should be 120, measured from falling edge to next falling edge
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:41:61: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_READ_MIN[2] = { 20_us, 4_us }; // should be 15, was 30, says when it is safe to read a valid bit
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:41:69: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_READ_MIN[2] = { 20_us, 4_us }; // should be 15, was 30, says when it is safe to read a valid bit
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:42:61: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_READ_MAX[2] = { 60_us, 10_us }; // low states (zeros) of a master should not exceed this time in a slot
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:42:68: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_READ_MAX[2] = { 60_us, 10_us }; // low states (zeros) of a master should not exceed this time in a slot
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:43:61: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_WRITE_ZERO[2] = { 30_us, 8_us }; // the hub holds a zero for this long
^
D:\Arduino\libraries\OneWireHub\src/OneWireHub_config.h:43:69: error: 'constexpr timeOW_t operator""_us(long long unsigned int)' called in a constant expression
constexpr timeOW_t ONEWIRE_TIME_WRITE_ZERO[2] = { 30_us, 8_us }; // the hub holds a zero for this long
^
cc1plus.exe: warning: unrecognized command line option '-Wno-frame-address'
The text was updated successfully, but these errors were encountered: