NXP Application Code Hub
Change the repository type filter
All
Repositories list
135 repositories
- The PCA9420 is a highly integrated Power Management IC (PMIC), targeted to provide a full power management solution for low-power microcontroller applications or other similar applications. The device consists of a linear battery charger capable of charging up to 315 mA current.
an-mc-bldc-ke17z
PublicThis application note demonstrates how to implement the six-step commutation control of brushless direct current(BLDC) motor on KE17Z512 and KE17Z256 MCUs. The NXP Freedom board FRDM-MC-LVBLDC is used as a hardware platform for the motor control reference solution. The hardware-dependent part of the motor control software is addressed as well.dm-lpc5536-evse-sigbrd
PublicThe EVSE-SIG-BRD is an add-on development board that supports electric vehicle supply equipment (EVSE) platform development. The board also supports the proximity pilot, ground fault circuit interrupter (GFCI), and relay drive features. The main host of the system is on a separate processor development board- The flash swap function, which is accessible on certain Kinetis microcontroller components, serves as a strong tool for dependable software enhancements. This document discusses how to employ the swap feature effectively. Frequently asked queries are responded to, and a practical use case is illustrated.
- This example demo describes how to configure low-power motion or magnetic wake-up sensor for tamper/theft detection and transmit ALERT to connected end user via BLE wireless UART using FRDM-MCXW71.Such use-case can find many applications where user would like to completely shut off power supply or put the device in power down mode etc.
dm-smart-sensing-inhaler
Public- The Portable Anomaly Detect demo shows an on-device trainable anomaly detection platform that is based on the FRDM-MCXN947 board. The demo shows how to train the SVM model on-device with FXLS8974CF accelerometer data and inference SVM model on-device too.During the whole life cycle of a device, learning may need to be done multiple times.
- This demo shows how to implement a wireless door chime with the RW612-FRDM board. The chime is controlled over Wi-Fi with the MQTT application protocol. Chime sound data is streamed on the I2S pins of the RW612-FRDM Arduino header. An external codec and also an amplifier are required to play the sound on an external speaker.
ap-frdm-mcx-buspal
PublicThis software pack provides the buspal application ported to different MCX device families. Buspal is an embedded software tool that is available as a companion to blhost. The tool acts as a bus translator with an established connection with blhost over UART and with the target device over I2C, SPI or CANrd-mcu-svui
Publicap-dvs-pvt-sensor-rt600
PublicThis repository holds the Dynamic Voltage Scaling Using PVT Sensor Pack on RT600 and depends on the MCUXpresso SDK overall delivery. This application software pack helps NXP customers quickly reduce power and increase battery life. GitHub topics: low-power, power-conversion- This is a demo application which provides a command line interface for these 6 applications of NAFE13388 for Analog to Digital Conversion.<br>Current Sensing using SCSR Conversion Voltage Sensing using SCSR Conversion Voltage Sensing using MCMR Conversion RTD 2/4 Wires using SCCR Conversion Weight Scale
- This demo serves as guide on enabling FXLS897xxx accelerometer over I2C and light sensor over ADC readings. The ADC conversions are trigger by a hardware timer trigger. The I2C transfers make use of CMSIS-Drives. Interact application through the IoT Toolbox using a Smartphone.