This file was autogenerated by running 'node scripts/getcommands.js' in the repository. All command examples were taken from json file.
This will send a Tasmota HTTP Toggle command every 15 seconds to given device. Repeats value here is '-1' because we want this event to stay forever.
addRepeatingEvent 15 -1 SendGet http://192.168.0.112/cm?cmnd=Power0%20Toggle
This will send a Tasmota HTTP Toggle command to given device when a button on pin 8 is clicked (pin 8, NOT channel 8)
addEventHandler OnClick 8 SendGet http://192.168.0.112/cm?cmnd=Power0%20Toggle
This will set a Tasmota HTTP Power0 ON command when a channel 1 value become non-zero
addChangeHandler Channel1 != 0 SendGet http://192.168.0.112/cm?cmnd=Power0%20On
This will set a Tasmota HTTP Power0 OFF command when a channel 1 value become zero
addChangeHandler Channel1 == 0 SendGet http://192.168.0.112/cm?cmnd=Power0%20Off
This will create a new repeating events with 1 repeat count and 60 seconds delay everytime Channel1 becomes 1. Basically, it will automatically turn off the light 60 seconds after you turn it on. TODO: clear previous event instance?
addChangeHandler Channel1 == 1 addRepeatingEvent 60 1 setChannel 1 0
This is another approach to sending GET for change. As you can see, it's using addEventHandler instead of addChangeHandler. This will fire with every change. The index 1 here is a channel index. The $CH1 macro in URL will get expended to current channel value, usually 1 or 0
addEventHandler OnChannelChange 1 http://192.168.0.112/cm?cmnd=Power0%20$CH1
This will execute console command when IR event is received. Keep in mind it's using addEventHandler2, which is like addEventHandler, but takes two arguments.
addEventHandler2 IR_Samsung 0x707 0x61 led_enableAll 0
This will turn on LED with 500 temperature 500, dimmer 100 at 8:00:00 every Sunday (0x01 is a bit flag for Sunday, bit 0 means sunday, bit 1 monday, etc etc), 234 here is unique ID of clock event so you can remove it later. You MUST START NTP driver for it to work.
addClockEvent 8:00:00 0x01 234 backlog led_temperature 500; led_dimmer 100; led_enableAll 1;
This will turn on POWER at 12:00:00 every Sunday and Monday (0x01 is a bit flag for Sunday, bit 0 means sunday, bit 1 monday, etc etc), 567 here is unique ID of clock event so you can remove it later. You MUST START NTP driver for it to work.
addClockEvent 12:00:00 0x03 567 POWER ON
This simple timer will toggle LED state every 5 seconds. -1 hear means infinite repeats. The ! stands for negation and $led_enableAll is a constant that you can read to get 0 or 1. It works like $CH11, $CH4 etc (any number) for accessing channel value
addRepeatingEvent 5 -1 led_enableAll !$led_enableAll