diff --git a/config/v1/0000_10_config-operator_01_infrastructure-CustomNoUpgrade.crd.yaml b/config/v1/0000_10_config-operator_01_infrastructure-CustomNoUpgrade.crd.yaml index 177d4b203fc..5aece24ff9a 100644 --- a/config/v1/0000_10_config-operator_01_infrastructure-CustomNoUpgrade.crd.yaml +++ b/config/v1/0000_10_config-operator_01_infrastructure-CustomNoUpgrade.crd.yaml @@ -72,46 +72,7 @@ spec: type: object baremetal: description: BareMetal contains settings specific to the BareMetal platform. - properties: - apiServerInternalIPs: - description: apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - ingressIPs: - description: ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: ingressIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example "10.0.0.0/8" or "fd00::/8". - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set type: object - x-kubernetes-validations: - - message: apiServerInternalIPs list is required once set - rule: '!has(oldSelf.apiServerInternalIPs) || has(self.apiServerInternalIPs)' - - message: ingressIPs list is required once set - rule: '!has(oldSelf.ingressIPs) || has(self.ingressIPs)' equinixMetal: description: EquinixMetal contains settings specific to the Equinix Metal infrastructure provider. type: object @@ -269,46 +230,7 @@ spec: type: object openstack: description: OpenStack contains settings specific to the OpenStack infrastructure provider. - properties: - apiServerInternalIPs: - description: apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - ingressIPs: - description: ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: ingressIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example "10.0.0.0/8" or "fd00::/8". - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set type: object - x-kubernetes-validations: - - message: apiServerInternalIPs list is required once set - rule: '!has(oldSelf.apiServerInternalIPs) || has(self.apiServerInternalIPs)' - - message: ingressIPs list is required once set - rule: '!has(oldSelf.ingressIPs) || has(self.ingressIPs)' ovirt: description: Ovirt contains settings specific to the oVirt infrastructure provider. type: object @@ -362,18 +284,6 @@ spec: vsphere: description: VSphere contains settings specific to the VSphere infrastructure provider. properties: - apiServerInternalIPs: - description: apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' failureDomains: description: failureDomains contains the definition of region, zone and the vCenter topology. If this is omitted failure domains (regions and zones) will not be used. items: @@ -457,27 +367,6 @@ spec: - zone type: object type: array - ingressIPs: - description: ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: ingressIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example "10.0.0.0/8" or "fd00::/8". - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set nodeNetworking: description: nodeNetworking contains the definition of internal and external network constraints for assigning the node's networking. If this field is omitted, networking defaults to the legacy address selection behavior which is to only support a single address and return the first one found. properties: @@ -553,11 +442,6 @@ spec: minItems: 0 type: array type: object - x-kubernetes-validations: - - message: apiServerInternalIPs list is required once set - rule: '!has(oldSelf.apiServerInternalIPs) || has(self.apiServerInternalIPs)' - - message: ingressIPs list is required once set - rule: '!has(oldSelf.ingressIPs) || has(self.ingressIPs)' type: object type: object status: @@ -795,15 +679,6 @@ spec: - message: type is immutable once set rule: oldSelf == '' || self == oldSelf type: object - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set nodeDNSIP: description: nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for BareMetal deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster. type: string @@ -1080,15 +955,6 @@ spec: - message: type is immutable once set rule: oldSelf == '' || self == oldSelf type: object - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set nodeDNSIP: description: nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for OpenStack deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster. type: string @@ -1242,15 +1108,6 @@ spec: - message: type is immutable once set rule: oldSelf == '' || self == oldSelf type: object - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set nodeDNSIP: description: nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for vSphere deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster. type: string diff --git a/config/v1/0000_10_config-operator_01_infrastructure-Default.crd.yaml b/config/v1/0000_10_config-operator_01_infrastructure-Default.crd.yaml index 2993f2f5c06..8916d77b5bf 100644 --- a/config/v1/0000_10_config-operator_01_infrastructure-Default.crd.yaml +++ b/config/v1/0000_10_config-operator_01_infrastructure-Default.crd.yaml @@ -72,46 +72,7 @@ spec: type: object baremetal: description: BareMetal contains settings specific to the BareMetal platform. - properties: - apiServerInternalIPs: - description: apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - ingressIPs: - description: ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: ingressIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example "10.0.0.0/8" or "fd00::/8". - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set type: object - x-kubernetes-validations: - - message: apiServerInternalIPs list is required once set - rule: '!has(oldSelf.apiServerInternalIPs) || has(self.apiServerInternalIPs)' - - message: ingressIPs list is required once set - rule: '!has(oldSelf.ingressIPs) || has(self.ingressIPs)' equinixMetal: description: EquinixMetal contains settings specific to the Equinix Metal infrastructure provider. type: object @@ -269,46 +230,7 @@ spec: type: object openstack: description: OpenStack contains settings specific to the OpenStack infrastructure provider. - properties: - apiServerInternalIPs: - description: apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - ingressIPs: - description: ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: ingressIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example "10.0.0.0/8" or "fd00::/8". - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set type: object - x-kubernetes-validations: - - message: apiServerInternalIPs list is required once set - rule: '!has(oldSelf.apiServerInternalIPs) || has(self.apiServerInternalIPs)' - - message: ingressIPs list is required once set - rule: '!has(oldSelf.ingressIPs) || has(self.ingressIPs)' ovirt: description: Ovirt contains settings specific to the oVirt infrastructure provider. type: object @@ -362,18 +284,6 @@ spec: vsphere: description: VSphere contains settings specific to the VSphere infrastructure provider. properties: - apiServerInternalIPs: - description: apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' failureDomains: description: failureDomains contains the definition of region, zone and the vCenter topology. If this is omitted failure domains (regions and zones) will not be used. items: @@ -451,27 +361,6 @@ spec: - zone type: object type: array - ingressIPs: - description: ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: ingressIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example "10.0.0.0/8" or "fd00::/8". - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set nodeNetworking: description: nodeNetworking contains the definition of internal and external network constraints for assigning the node's networking. If this field is omitted, networking defaults to the legacy address selection behavior which is to only support a single address and return the first one found. properties: @@ -547,11 +436,6 @@ spec: minItems: 0 type: array type: object - x-kubernetes-validations: - - message: apiServerInternalIPs list is required once set - rule: '!has(oldSelf.apiServerInternalIPs) || has(self.apiServerInternalIPs)' - - message: ingressIPs list is required once set - rule: '!has(oldSelf.ingressIPs) || has(self.ingressIPs)' type: object type: object status: @@ -773,15 +657,6 @@ spec: type: string maxItems: 2 type: array - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set nodeDNSIP: description: nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for BareMetal deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster. type: string @@ -959,15 +834,6 @@ spec: - message: type is immutable once set rule: oldSelf == '' || self == oldSelf type: object - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set nodeDNSIP: description: nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for OpenStack deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster. type: string @@ -1089,15 +955,6 @@ spec: type: string maxItems: 2 type: array - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set nodeDNSIP: description: nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for vSphere deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster. type: string diff --git a/config/v1/0000_10_config-operator_01_infrastructure-TechPreviewNoUpgrade.crd.yaml b/config/v1/0000_10_config-operator_01_infrastructure-TechPreviewNoUpgrade.crd.yaml index 2936c90fde4..f9e91cca4e1 100644 --- a/config/v1/0000_10_config-operator_01_infrastructure-TechPreviewNoUpgrade.crd.yaml +++ b/config/v1/0000_10_config-operator_01_infrastructure-TechPreviewNoUpgrade.crd.yaml @@ -72,46 +72,7 @@ spec: type: object baremetal: description: BareMetal contains settings specific to the BareMetal platform. - properties: - apiServerInternalIPs: - description: apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - ingressIPs: - description: ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: ingressIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example "10.0.0.0/8" or "fd00::/8". - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set type: object - x-kubernetes-validations: - - message: apiServerInternalIPs list is required once set - rule: '!has(oldSelf.apiServerInternalIPs) || has(self.apiServerInternalIPs)' - - message: ingressIPs list is required once set - rule: '!has(oldSelf.ingressIPs) || has(self.ingressIPs)' equinixMetal: description: EquinixMetal contains settings specific to the Equinix Metal infrastructure provider. type: object @@ -269,46 +230,7 @@ spec: type: object openstack: description: OpenStack contains settings specific to the OpenStack infrastructure provider. - properties: - apiServerInternalIPs: - description: apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - ingressIPs: - description: ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: ingressIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example "10.0.0.0/8" or "fd00::/8". - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set type: object - x-kubernetes-validations: - - message: apiServerInternalIPs list is required once set - rule: '!has(oldSelf.apiServerInternalIPs) || has(self.apiServerInternalIPs)' - - message: ingressIPs list is required once set - rule: '!has(oldSelf.ingressIPs) || has(self.ingressIPs)' ovirt: description: Ovirt contains settings specific to the oVirt infrastructure provider. type: object @@ -362,18 +284,6 @@ spec: vsphere: description: VSphere contains settings specific to the VSphere infrastructure provider. properties: - apiServerInternalIPs: - description: apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' failureDomains: description: failureDomains contains the definition of region, zone and the vCenter topology. If this is omitted failure domains (regions and zones) will not be used. items: @@ -457,27 +367,6 @@ spec: - zone type: object type: array - ingressIPs: - description: ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - type: string - maxItems: 2 - type: array - x-kubernetes-list-type: set - x-kubernetes-validations: - - message: ingressIPs must contain at most one IPv4 address and at most one IPv6 address - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example "10.0.0.0/8" or "fd00::/8". - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set nodeNetworking: description: nodeNetworking contains the definition of internal and external network constraints for assigning the node's networking. If this field is omitted, networking defaults to the legacy address selection behavior which is to only support a single address and return the first one found. properties: @@ -553,11 +442,6 @@ spec: minItems: 0 type: array type: object - x-kubernetes-validations: - - message: apiServerInternalIPs list is required once set - rule: '!has(oldSelf.apiServerInternalIPs) || has(self.apiServerInternalIPs)' - - message: ingressIPs list is required once set - rule: '!has(oldSelf.ingressIPs) || has(self.ingressIPs)' type: object type: object status: @@ -795,15 +679,6 @@ spec: - message: type is immutable once set rule: oldSelf == '' || self == oldSelf type: object - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set nodeDNSIP: description: nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for BareMetal deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster. type: string @@ -1080,15 +955,6 @@ spec: - message: type is immutable once set rule: oldSelf == '' || self == oldSelf type: object - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set nodeDNSIP: description: nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for OpenStack deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster. type: string @@ -1242,15 +1108,6 @@ spec: - message: type is immutable once set rule: oldSelf == '' || self == oldSelf type: object - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - type: string - maxItems: 32 - type: array - x-kubernetes-list-type: set nodeDNSIP: description: nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for vSphere deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster. type: string diff --git a/config/v1/stable.infrastructure.testsuite.yaml b/config/v1/stable.infrastructure.testsuite.yaml index 9d0861b68b8..025cae85a8f 100644 --- a/config/v1/stable.infrastructure.testsuite.yaml +++ b/config/v1/stable.infrastructure.testsuite.yaml @@ -12,176 +12,6 @@ tests: apiVersion: config.openshift.io/v1 kind: Infrastructure spec: {} - - name: Should be able to pass 2 IP addresses to apiServerInternalIPs in the platform spec - initial: | - apiVersion: config.openshift.io/v1 - kind: Infrastructure - spec: - platformSpec: - type: BareMetal - baremetal: - apiServerInternalIPs: - - 192.0.2.1 - - "2001:db8::1" - expected: | - apiVersion: config.openshift.io/v1 - kind: Infrastructure - spec: - platformSpec: - type: BareMetal - baremetal: - apiServerInternalIPs: - - 192.0.2.1 - - "2001:db8::1" - - name: Should not be able to pass not-an-IP to apiServerInternalIPs in the platform spec - initial: | - apiVersion: config.openshift.io/v1 - kind: Infrastructure - spec: - platformSpec: - type: BareMetal - baremetal: - apiServerInternalIPs: - - not-an-ip-address - expectedError: "Invalid value: \"not-an-ip-address\"" - - name: Should not be able to pass 2 IPv4 addresses to apiServerInternalIPs in the platform spec - initial: | - apiVersion: config.openshift.io/v1 - kind: Infrastructure - spec: - platformSpec: - type: BareMetal - baremetal: - apiServerInternalIPs: - - 192.0.2.1 - - 192.0.2.2 - expectedError: "apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address" - - name: Should not be able to pass 2 IPv6 addresses to apiServerInternalIPs in the platform spec - initial: | - apiVersion: config.openshift.io/v1 - kind: Infrastructure - spec: - platformSpec: - type: BareMetal - baremetal: - apiServerInternalIPs: - - "2001:db8::1" - - "2001:db8::2" - expectedError: "apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address" - - name: Should not be able to pass more than 2 entries to apiServerInternalIPs in the platform spec - initial: | - apiVersion: config.openshift.io/v1 - kind: Infrastructure - spec: - platformSpec: - type: BareMetal - baremetal: - apiServerInternalIPs: - - 192.0.2.1 - - "2001:db8::1" - - 192.0.2.2 - expectedError: "Too many: 3: must have at most 2 items" - - name: Should be able to pass 2 IP addresses to ingressIPs in the platform spec - initial: | - apiVersion: config.openshift.io/v1 - kind: Infrastructure - spec: - platformSpec: - type: BareMetal - baremetal: - ingressIPs: - - 192.0.2.1 - - "2001:db8::1" - expected: | - apiVersion: config.openshift.io/v1 - kind: Infrastructure - spec: - platformSpec: - type: BareMetal - baremetal: - ingressIPs: - - 192.0.2.1 - - "2001:db8::1" - - name: Should not be able to pass not-an-IP to ingressIPs in the platform spec - initial: | - apiVersion: config.openshift.io/v1 - kind: Infrastructure - spec: - platformSpec: - type: BareMetal - baremetal: - ingressIPs: - - not-an-ip-address - expectedError: "Invalid value: \"not-an-ip-address\"" - - name: Should not be able to pass 2 IPv4 addresses to ingressIPs in the platform spec - initial: | - apiVersion: config.openshift.io/v1 - kind: Infrastructure - spec: - platformSpec: - type: BareMetal - baremetal: - ingressIPs: - - 192.0.2.1 - - 192.0.2.2 - expectedError: "ingressIPs must contain at most one IPv4 address and at most one IPv6 address" - - name: Should not be able to pass 2 IPv6 addresses to ingressIPs in the platform spec - initial: | - apiVersion: config.openshift.io/v1 - kind: Infrastructure - spec: - platformSpec: - type: BareMetal - baremetal: - ingressIPs: - - "2001:db8::1" - - "2001:db8::2" - expectedError: "ingressIPs must contain at most one IPv4 address and at most one IPv6 address" - - name: Should not be able to pass more than 2 entries to ingressIPs in the platform spec - initial: | - apiVersion: config.openshift.io/v1 - kind: Infrastructure - spec: - platformSpec: - type: BareMetal - baremetal: - ingressIPs: - - 192.0.2.1 - - "2001:db8::1" - - 192.0.2.2 - expectedError: "Too many: 3: must have at most 2 items" - - name: Should be able to pass 2 IP subnets addresses to machineNetworks in the platform spec - initial: | - apiVersion: config.openshift.io/v1 - kind: Infrastructure - spec: - platformSpec: - type: BareMetal - baremetal: - machineNetworks: - - "192.0.2.0/24" - - "2001:db8::0/32" - expected: | - apiVersion: config.openshift.io/v1 - kind: Infrastructure - spec: - platformSpec: - type: BareMetal - baremetal: - machineNetworks: - - "192.0.2.0/24" - - "2001:db8::0/32" - - name: Should not be able to pass not-a-CIDR to machineNetworks in the platform spec - initial: | - apiVersion: config.openshift.io/v1 - kind: Infrastructure - spec: - platformSpec: - type: BareMetal - baremetal: - machineNetworks: - - 192.0.2.1 - expectedError: "Invalid value: \"192.0.2.1\"" onUpdate: - name: Should be able to change External platformName from unknown to something else initial: | diff --git a/config/v1/types_infrastructure.go b/config/v1/types_infrastructure.go index 94ace910ad9..e5a059c13cb 100644 --- a/config/v1/types_infrastructure.go +++ b/config/v1/types_infrastructure.go @@ -729,48 +729,7 @@ type BareMetalPlatformLoadBalancer struct { // BareMetalPlatformSpec holds the desired state of the BareMetal infrastructure provider. // This only includes fields that can be modified in the cluster. -// +kubebuilder:validation:XValidation:rule="!has(oldSelf.apiServerInternalIPs) || has(self.apiServerInternalIPs)",message="apiServerInternalIPs list is required once set" -// +kubebuilder:validation:XValidation:rule="!has(oldSelf.ingressIPs) || has(self.ingressIPs)",message="ingressIPs list is required once set" -type BareMetalPlatformSpec struct { - // apiServerInternalIPs are the IP addresses to contact the Kubernetes API - // server that can be used by components inside the cluster, like kubelets - // using the infrastructure rather than Kubernetes networking. These are the - // IPs for a self-hosted load balancer in front of the API servers. - // In dual stack clusters this list contains two IP addresses, one from IPv4 - // family and one from IPv6. - // In single stack clusters a single IP address is expected. - // When omitted, values from the status.apiServerInternalIPs will be used. - // Once set, the list cannot be completely removed (but its second entry can). - // - // +kubebuilder:validation:MaxItems=2 - // +kubebuilder:validation:XValidation:rule="size(self) == 2 ? self.exists_one(x, x.contains(':')) : true",message="apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address" - // +listType=set - // +optional - APIServerInternalIPs []IP `json:"apiServerInternalIPs"` - - // ingressIPs are the external IPs which route to the default ingress - // controller. The IPs are suitable targets of a wildcard DNS record used to - // resolve default route host names. - // In dual stack clusters this list contains two IP addresses, one from IPv4 - // family and one from IPv6. - // In single stack clusters a single IP address is expected. - // When omitted, values from the status.ingressIPs will be used. - // Once set, the list cannot be completely removed (but its second entry can). - // - // +kubebuilder:validation:MaxItems=2 - // +kubebuilder:validation:XValidation:rule="size(self) == 2 ? self.exists_one(x, x.contains(':')) : true",message="ingressIPs must contain at most one IPv4 address and at most one IPv6 address" - // +listType=set - // +optional - IngressIPs []IP `json:"ingressIPs"` - - // machineNetworks are IP networks used to connect all the OpenShift cluster - // nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, - // for example "10.0.0.0/8" or "fd00::/8". - // +listType=set - // +kubebuilder:validation:MaxItems=32 - // +optional - MachineNetworks []CIDR `json:"machineNetworks"` -} +type BareMetalPlatformSpec struct{} // BareMetalPlatformStatus holds the current status of the BareMetal infrastructure provider. // For more information about the network architecture used with the BareMetal platform type, see: @@ -823,12 +782,6 @@ type BareMetalPlatformStatus struct { // +openshift:enable:FeatureSets=CustomNoUpgrade;TechPreviewNoUpgrade // +optional LoadBalancer *BareMetalPlatformLoadBalancer `json:"loadBalancer,omitempty"` - - // machineNetworks are IP networks used to connect all the OpenShift cluster nodes. - // +listType=set - // +kubebuilder:validation:MaxItems=32 - // +optional - MachineNetworks []CIDR `json:"machineNetworks"` } // OpenStackPlatformLoadBalancer defines the load balancer used by the cluster on OpenStack platform. @@ -854,48 +807,7 @@ type OpenStackPlatformLoadBalancer struct { // OpenStackPlatformSpec holds the desired state of the OpenStack infrastructure provider. // This only includes fields that can be modified in the cluster. -// +kubebuilder:validation:XValidation:rule="!has(oldSelf.apiServerInternalIPs) || has(self.apiServerInternalIPs)",message="apiServerInternalIPs list is required once set" -// +kubebuilder:validation:XValidation:rule="!has(oldSelf.ingressIPs) || has(self.ingressIPs)",message="ingressIPs list is required once set" -type OpenStackPlatformSpec struct { - // apiServerInternalIPs are the IP addresses to contact the Kubernetes API - // server that can be used by components inside the cluster, like kubelets - // using the infrastructure rather than Kubernetes networking. These are the - // IPs for a self-hosted load balancer in front of the API servers. - // In dual stack clusters this list contains two IP addresses, one from IPv4 - // family and one from IPv6. - // In single stack clusters a single IP address is expected. - // When omitted, values from the status.apiServerInternalIPs will be used. - // Once set, the list cannot be completely removed (but its second entry can). - // - // +kubebuilder:validation:MaxItems=2 - // +kubebuilder:validation:XValidation:rule="size(self) == 2 ? self.exists_one(x, x.contains(':')) : true",message="apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address" - // +listType=set - // +optional - APIServerInternalIPs []IP `json:"apiServerInternalIPs"` - - // ingressIPs are the external IPs which route to the default ingress - // controller. The IPs are suitable targets of a wildcard DNS record used to - // resolve default route host names. - // In dual stack clusters this list contains two IP addresses, one from IPv4 - // family and one from IPv6. - // In single stack clusters a single IP address is expected. - // When omitted, values from the status.ingressIPs will be used. - // Once set, the list cannot be completely removed (but its second entry can). - // - // +kubebuilder:validation:MaxItems=2 - // +kubebuilder:validation:XValidation:rule="size(self) == 2 ? self.exists_one(x, x.contains(':')) : true",message="ingressIPs must contain at most one IPv4 address and at most one IPv6 address" - // +listType=set - // +optional - IngressIPs []IP `json:"ingressIPs"` - - // machineNetworks are IP networks used to connect all the OpenShift cluster - // nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, - // for example "10.0.0.0/8" or "fd00::/8". - // +listType=set - // +kubebuilder:validation:MaxItems=32 - // +optional - MachineNetworks []CIDR `json:"machineNetworks"` -} +type OpenStackPlatformSpec struct{} // OpenStackPlatformStatus holds the current status of the OpenStack infrastructure provider. type OpenStackPlatformStatus struct { @@ -949,12 +861,6 @@ type OpenStackPlatformStatus struct { // +kubebuilder:default={"type": "OpenShiftManagedDefault"} // +optional LoadBalancer *OpenStackPlatformLoadBalancer `json:"loadBalancer,omitempty"` - - // machineNetworks are IP networks used to connect all the OpenShift cluster nodes. - // +listType=set - // +kubebuilder:validation:MaxItems=32 - // +optional - MachineNetworks []CIDR `json:"machineNetworks"` } // OvirtPlatformLoadBalancer defines the load balancer used by the cluster on Ovirt platform. @@ -1234,8 +1140,6 @@ type VSpherePlatformNodeNetworking struct { // VSpherePlatformSpec holds the desired state of the vSphere infrastructure provider. // In the future the cloud provider operator, storage operator and machine operator will // use these fields for configuration. -// +kubebuilder:validation:XValidation:rule="!has(oldSelf.apiServerInternalIPs) || has(self.apiServerInternalIPs)",message="apiServerInternalIPs list is required once set" -// +kubebuilder:validation:XValidation:rule="!has(oldSelf.ingressIPs) || has(self.ingressIPs)",message="ingressIPs list is required once set" type VSpherePlatformSpec struct { // vcenters holds the connection details for services to communicate with vCenter. // Currently, only a single vCenter is supported. @@ -1259,45 +1163,6 @@ type VSpherePlatformSpec struct { // return the first one found. // +optional NodeNetworking VSpherePlatformNodeNetworking `json:"nodeNetworking,omitempty"` - - // apiServerInternalIPs are the IP addresses to contact the Kubernetes API - // server that can be used by components inside the cluster, like kubelets - // using the infrastructure rather than Kubernetes networking. These are the - // IPs for a self-hosted load balancer in front of the API servers. - // In dual stack clusters this list contains two IP addresses, one from IPv4 - // family and one from IPv6. - // In single stack clusters a single IP address is expected. - // When omitted, values from the status.apiServerInternalIPs will be used. - // Once set, the list cannot be completely removed (but its second entry can). - // - // +kubebuilder:validation:MaxItems=2 - // +kubebuilder:validation:XValidation:rule="size(self) == 2 ? self.exists_one(x, x.contains(':')) : true",message="apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address" - // +listType=set - // +optional - APIServerInternalIPs []IP `json:"apiServerInternalIPs"` - - // ingressIPs are the external IPs which route to the default ingress - // controller. The IPs are suitable targets of a wildcard DNS record used to - // resolve default route host names. - // In dual stack clusters this list contains two IP addresses, one from IPv4 - // family and one from IPv6. - // In single stack clusters a single IP address is expected. - // When omitted, values from the status.ingressIPs will be used. - // Once set, the list cannot be completely removed (but its second entry can). - // - // +kubebuilder:validation:MaxItems=2 - // +kubebuilder:validation:XValidation:rule="size(self) == 2 ? self.exists_one(x, x.contains(':')) : true",message="ingressIPs must contain at most one IPv4 address and at most one IPv6 address" - // +listType=set - // +optional - IngressIPs []IP `json:"ingressIPs"` - - // machineNetworks are IP networks used to connect all the OpenShift cluster - // nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, - // for example "10.0.0.0/8" or "fd00::/8". - // +listType=set - // +kubebuilder:validation:MaxItems=32 - // +optional - MachineNetworks []CIDR `json:"machineNetworks"` } // VSpherePlatformStatus holds the current status of the vSphere infrastructure provider. @@ -1349,12 +1214,6 @@ type VSpherePlatformStatus struct { // +openshift:enable:FeatureSets=CustomNoUpgrade;TechPreviewNoUpgrade // +optional LoadBalancer *VSpherePlatformLoadBalancer `json:"loadBalancer,omitempty"` - - // machineNetworks are IP networks used to connect all the OpenShift cluster nodes. - // +listType=set - // +kubebuilder:validation:MaxItems=32 - // +optional - MachineNetworks []CIDR `json:"machineNetworks"` } // IBMCloudServiceEndpoint stores the configuration of a custom url to @@ -1755,19 +1614,3 @@ type InfrastructureList struct { Items []Infrastructure `json:"items"` } - -// CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). -// +kubebuilder:validation:Pattern=`(^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$)` -// + --- -// + The regex for the IPv4 and IPv6 CIDR range was taken from -// + https://blog.markhatton.co.uk/2011/03/15/regular-expressions-for-ip-addresses-cidr-ranges-and-hostnames/ -// + The resulting regex is an OR of both regexes. -type CIDR string - -// IP is an IP address (for example, "10.0.0.0" or "fd00::"). -// +kubebuilder:validation:Pattern=`(^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*)` -// + --- -// + The regex for the IPv4 and IPv6 address was taken from -// + https://blog.markhatton.co.uk/2011/03/15/regular-expressions-for-ip-addresses-cidr-ranges-and-hostnames/ -// + The resulting regex is an OR of both regexes. -type IP string diff --git a/config/v1/zz_generated.deepcopy.go b/config/v1/zz_generated.deepcopy.go index a6515075de4..381a1642cc5 100644 --- a/config/v1/zz_generated.deepcopy.go +++ b/config/v1/zz_generated.deepcopy.go @@ -638,21 +638,6 @@ func (in *BareMetalPlatformLoadBalancer) DeepCopy() *BareMetalPlatformLoadBalanc // DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil. func (in *BareMetalPlatformSpec) DeepCopyInto(out *BareMetalPlatformSpec) { *out = *in - if in.APIServerInternalIPs != nil { - in, out := &in.APIServerInternalIPs, &out.APIServerInternalIPs - *out = make([]IP, len(*in)) - copy(*out, *in) - } - if in.IngressIPs != nil { - in, out := &in.IngressIPs, &out.IngressIPs - *out = make([]IP, len(*in)) - copy(*out, *in) - } - if in.MachineNetworks != nil { - in, out := &in.MachineNetworks, &out.MachineNetworks - *out = make([]CIDR, len(*in)) - copy(*out, *in) - } return } @@ -684,11 +669,6 @@ func (in *BareMetalPlatformStatus) DeepCopyInto(out *BareMetalPlatformStatus) { *out = new(BareMetalPlatformLoadBalancer) **out = **in } - if in.MachineNetworks != nil { - in, out := &in.MachineNetworks, &out.MachineNetworks - *out = make([]CIDR, len(*in)) - copy(*out, *in) - } return } @@ -4271,21 +4251,6 @@ func (in *OpenStackPlatformLoadBalancer) DeepCopy() *OpenStackPlatformLoadBalanc // DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil. func (in *OpenStackPlatformSpec) DeepCopyInto(out *OpenStackPlatformSpec) { *out = *in - if in.APIServerInternalIPs != nil { - in, out := &in.APIServerInternalIPs, &out.APIServerInternalIPs - *out = make([]IP, len(*in)) - copy(*out, *in) - } - if in.IngressIPs != nil { - in, out := &in.IngressIPs, &out.IngressIPs - *out = make([]IP, len(*in)) - copy(*out, *in) - } - if in.MachineNetworks != nil { - in, out := &in.MachineNetworks, &out.MachineNetworks - *out = make([]CIDR, len(*in)) - copy(*out, *in) - } return } @@ -4317,11 +4282,6 @@ func (in *OpenStackPlatformStatus) DeepCopyInto(out *OpenStackPlatformStatus) { *out = new(OpenStackPlatformLoadBalancer) **out = **in } - if in.MachineNetworks != nil { - in, out := &in.MachineNetworks, &out.MachineNetworks - *out = make([]CIDR, len(*in)) - copy(*out, *in) - } return } @@ -4538,12 +4498,12 @@ func (in *PlatformSpec) DeepCopyInto(out *PlatformSpec) { if in.BareMetal != nil { in, out := &in.BareMetal, &out.BareMetal *out = new(BareMetalPlatformSpec) - (*in).DeepCopyInto(*out) + **out = **in } if in.OpenStack != nil { in, out := &in.OpenStack, &out.OpenStack *out = new(OpenStackPlatformSpec) - (*in).DeepCopyInto(*out) + **out = **in } if in.Ovirt != nil { in, out := &in.Ovirt, &out.Ovirt @@ -5682,21 +5642,6 @@ func (in *VSpherePlatformSpec) DeepCopyInto(out *VSpherePlatformSpec) { } } in.NodeNetworking.DeepCopyInto(&out.NodeNetworking) - if in.APIServerInternalIPs != nil { - in, out := &in.APIServerInternalIPs, &out.APIServerInternalIPs - *out = make([]IP, len(*in)) - copy(*out, *in) - } - if in.IngressIPs != nil { - in, out := &in.IngressIPs, &out.IngressIPs - *out = make([]IP, len(*in)) - copy(*out, *in) - } - if in.MachineNetworks != nil { - in, out := &in.MachineNetworks, &out.MachineNetworks - *out = make([]CIDR, len(*in)) - copy(*out, *in) - } return } @@ -5728,11 +5673,6 @@ func (in *VSpherePlatformStatus) DeepCopyInto(out *VSpherePlatformStatus) { *out = new(VSpherePlatformLoadBalancer) **out = **in } - if in.MachineNetworks != nil { - in, out := &in.MachineNetworks, &out.MachineNetworks - *out = make([]CIDR, len(*in)) - copy(*out, *in) - } return } diff --git a/config/v1/zz_generated.swagger_doc_generated.go b/config/v1/zz_generated.swagger_doc_generated.go index 00e959020b4..215db197eb0 100644 --- a/config/v1/zz_generated.swagger_doc_generated.go +++ b/config/v1/zz_generated.swagger_doc_generated.go @@ -1271,10 +1271,7 @@ func (BareMetalPlatformLoadBalancer) SwaggerDoc() map[string]string { } var map_BareMetalPlatformSpec = map[string]string{ - "": "BareMetalPlatformSpec holds the desired state of the BareMetal infrastructure provider. This only includes fields that can be modified in the cluster.", - "apiServerInternalIPs": "apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - "ingressIPs": "ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - "machineNetworks": "machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example \"10.0.0.0/8\" or \"fd00::/8\".", + "": "BareMetalPlatformSpec holds the desired state of the BareMetal infrastructure provider. This only includes fields that can be modified in the cluster.", } func (BareMetalPlatformSpec) SwaggerDoc() map[string]string { @@ -1289,7 +1286,6 @@ var map_BareMetalPlatformStatus = map[string]string{ "ingressIPs": "ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IPs otherwise only one.", "nodeDNSIP": "nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for BareMetal deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster.", "loadBalancer": "loadBalancer defines how the load balancer used by the cluster is configured.", - "machineNetworks": "machineNetworks are IP networks used to connect all the OpenShift cluster nodes.", } func (BareMetalPlatformStatus) SwaggerDoc() map[string]string { @@ -1565,10 +1561,7 @@ func (OpenStackPlatformLoadBalancer) SwaggerDoc() map[string]string { } var map_OpenStackPlatformSpec = map[string]string{ - "": "OpenStackPlatformSpec holds the desired state of the OpenStack infrastructure provider. This only includes fields that can be modified in the cluster.", - "apiServerInternalIPs": "apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - "ingressIPs": "ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - "machineNetworks": "machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example \"10.0.0.0/8\" or \"fd00::/8\".", + "": "OpenStackPlatformSpec holds the desired state of the OpenStack infrastructure provider. This only includes fields that can be modified in the cluster.", } func (OpenStackPlatformSpec) SwaggerDoc() map[string]string { @@ -1584,7 +1577,6 @@ var map_OpenStackPlatformStatus = map[string]string{ "ingressIPs": "ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IPs otherwise only one.", "nodeDNSIP": "nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for OpenStack deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster.", "loadBalancer": "loadBalancer defines how the load balancer used by the cluster is configured.", - "machineNetworks": "machineNetworks are IP networks used to connect all the OpenShift cluster nodes.", } func (OpenStackPlatformStatus) SwaggerDoc() map[string]string { @@ -1745,13 +1737,10 @@ func (VSpherePlatformNodeNetworkingSpec) SwaggerDoc() map[string]string { } var map_VSpherePlatformSpec = map[string]string{ - "": "VSpherePlatformSpec holds the desired state of the vSphere infrastructure provider. In the future the cloud provider operator, storage operator and machine operator will use these fields for configuration.", - "vcenters": "vcenters holds the connection details for services to communicate with vCenter. Currently, only a single vCenter is supported.", - "failureDomains": "failureDomains contains the definition of region, zone and the vCenter topology. If this is omitted failure domains (regions and zones) will not be used.", - "nodeNetworking": "nodeNetworking contains the definition of internal and external network constraints for assigning the node's networking. If this field is omitted, networking defaults to the legacy address selection behavior which is to only support a single address and return the first one found.", - "apiServerInternalIPs": "apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - "ingressIPs": "ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - "machineNetworks": "machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example \"10.0.0.0/8\" or \"fd00::/8\".", + "": "VSpherePlatformSpec holds the desired state of the vSphere infrastructure provider. In the future the cloud provider operator, storage operator and machine operator will use these fields for configuration.", + "vcenters": "vcenters holds the connection details for services to communicate with vCenter. Currently, only a single vCenter is supported.", + "failureDomains": "failureDomains contains the definition of region, zone and the vCenter topology. If this is omitted failure domains (regions and zones) will not be used.", + "nodeNetworking": "nodeNetworking contains the definition of internal and external network constraints for assigning the node's networking. If this field is omitted, networking defaults to the legacy address selection behavior which is to only support a single address and return the first one found.", } func (VSpherePlatformSpec) SwaggerDoc() map[string]string { @@ -1766,7 +1755,6 @@ var map_VSpherePlatformStatus = map[string]string{ "ingressIPs": "ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IPs otherwise only one.", "nodeDNSIP": "nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for vSphere deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster.", "loadBalancer": "loadBalancer defines how the load balancer used by the cluster is configured.", - "machineNetworks": "machineNetworks are IP networks used to connect all the OpenShift cluster nodes.", } func (VSpherePlatformStatus) SwaggerDoc() map[string]string { diff --git a/machineconfiguration/v1/0000_80_controllerconfig.crd.yaml b/machineconfiguration/v1/0000_80_controllerconfig.crd.yaml index d725ef8850b..fde724b0cc1 100644 --- a/machineconfiguration/v1/0000_80_controllerconfig.crd.yaml +++ b/machineconfiguration/v1/0000_80_controllerconfig.crd.yaml @@ -283,45 +283,6 @@ spec: baremetal: description: BareMetal contains settings specific to the BareMetal platform. type: object - properties: - apiServerInternalIPs: - description: apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - type: array - maxItems: 2 - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - type: string - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - x-kubernetes-list-type: set - x-kubernetes-validations: - - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - message: apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address - ingressIPs: - description: ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - type: array - maxItems: 2 - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - type: string - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - x-kubernetes-list-type: set - x-kubernetes-validations: - - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - message: ingressIPs must contain at most one IPv4 address and at most one IPv6 address - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example "10.0.0.0/8" or "fd00::/8". - type: array - maxItems: 32 - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - type: string - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - x-kubernetes-list-type: set - x-kubernetes-validations: - - rule: '!has(oldSelf.apiServerInternalIPs) || has(self.apiServerInternalIPs)' - message: apiServerInternalIPs list is required once set - - rule: '!has(oldSelf.ingressIPs) || has(self.ingressIPs)' - message: ingressIPs list is required once set equinixMetal: description: EquinixMetal contains settings specific to the Equinix Metal infrastructure provider. type: object @@ -480,45 +441,6 @@ spec: openstack: description: OpenStack contains settings specific to the OpenStack infrastructure provider. type: object - properties: - apiServerInternalIPs: - description: apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - type: array - maxItems: 2 - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - type: string - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - x-kubernetes-list-type: set - x-kubernetes-validations: - - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - message: apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address - ingressIPs: - description: ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - type: array - maxItems: 2 - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - type: string - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - x-kubernetes-list-type: set - x-kubernetes-validations: - - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - message: ingressIPs must contain at most one IPv4 address and at most one IPv6 address - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example "10.0.0.0/8" or "fd00::/8". - type: array - maxItems: 32 - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - type: string - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - x-kubernetes-list-type: set - x-kubernetes-validations: - - rule: '!has(oldSelf.apiServerInternalIPs) || has(self.apiServerInternalIPs)' - message: apiServerInternalIPs list is required once set - - rule: '!has(oldSelf.ingressIPs) || has(self.ingressIPs)' - message: ingressIPs list is required once set ovirt: description: Ovirt contains settings specific to the oVirt infrastructure provider. type: object @@ -573,18 +495,6 @@ spec: description: VSphere contains settings specific to the VSphere infrastructure provider. type: object properties: - apiServerInternalIPs: - description: apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - type: array - maxItems: 2 - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - type: string - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - x-kubernetes-list-type: set - x-kubernetes-validations: - - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - message: apiServerInternalIPs must contain at most one IPv4 address and at most one IPv6 address failureDomains: description: failureDomains contains the definition of region, zone and the vCenter topology. If this is omitted failure domains (regions and zones) will not be used. type: array @@ -658,27 +568,6 @@ spec: type: string maxLength: 80 minLength: 1 - ingressIPs: - description: ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can). - type: array - maxItems: 2 - items: - description: IP is an IP address (for example, "10.0.0.0" or "fd00::"). - type: string - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*) - x-kubernetes-list-type: set - x-kubernetes-validations: - - rule: 'size(self) == 2 ? self.exists_one(x, x.contains('':'')) : true' - message: ingressIPs must contain at most one IPv4 address and at most one IPv6 address - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example "10.0.0.0/8" or "fd00::/8". - type: array - maxItems: 32 - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - type: string - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - x-kubernetes-list-type: set nodeNetworking: description: nodeNetworking contains the definition of internal and external network constraints for assigning the node's networking. If this field is omitted, networking defaults to the legacy address selection behavior which is to only support a single address and return the first one found. type: object @@ -745,11 +634,6 @@ spec: description: server is the fully-qualified domain name or the IP address of the vCenter server. --- type: string maxLength: 255 - x-kubernetes-validations: - - rule: '!has(oldSelf.apiServerInternalIPs) || has(self.apiServerInternalIPs)' - message: apiServerInternalIPs list is required once set - - rule: '!has(oldSelf.ingressIPs) || has(self.ingressIPs)' - message: ingressIPs list is required once set status: description: status holds observed values from the cluster. They may not be overridden. type: object @@ -972,15 +856,6 @@ spec: maxItems: 2 items: type: string - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. - type: array - maxItems: 32 - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - type: string - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - x-kubernetes-list-type: set nodeDNSIP: description: nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for BareMetal deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster. type: string @@ -1158,15 +1033,6 @@ spec: x-kubernetes-validations: - rule: oldSelf == '' || self == oldSelf message: type is immutable once set - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. - type: array - maxItems: 32 - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - type: string - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - x-kubernetes-list-type: set nodeDNSIP: description: nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for OpenStack deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster. type: string @@ -1288,15 +1154,6 @@ spec: maxItems: 2 items: type: string - machineNetworks: - description: machineNetworks are IP networks used to connect all the OpenShift cluster nodes. - type: array - maxItems: 32 - items: - description: CIDR is an IP address range in CIDR notation (for example, "10.0.0.0/8" or "fd00::/8"). - type: string - pattern: (^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(3[0-2]|[1-2][0-9]|[0-9]))$)|(^s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]d|1dd|[1-9]?d)(.(25[0-5]|2[0-4]d|1dd|[1-9]?d)){3}))|:)))(%.+)?s*(\/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9]))$) - x-kubernetes-list-type: set nodeDNSIP: description: nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for vSphere deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster. type: string diff --git a/openapi/generated_openapi/zz_generated.openapi.go b/openapi/generated_openapi/zz_generated.openapi.go index 39f62627b40..52280d70187 100644 --- a/openapi/generated_openapi/zz_generated.openapi.go +++ b/openapi/generated_openapi/zz_generated.openapi.go @@ -9265,68 +9265,6 @@ func schema_openshift_api_config_v1_BareMetalPlatformSpec(ref common.ReferenceCa SchemaProps: spec.SchemaProps{ Description: "BareMetalPlatformSpec holds the desired state of the BareMetal infrastructure provider. This only includes fields that can be modified in the cluster.", Type: []string{"object"}, - Properties: map[string]spec.Schema{ - "apiServerInternalIPs": { - VendorExtensible: spec.VendorExtensible{ - Extensions: spec.Extensions{ - "x-kubernetes-list-type": "set", - }, - }, - SchemaProps: spec.SchemaProps{ - Description: "apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - Type: []string{"array"}, - Items: &spec.SchemaOrArray{ - Schema: &spec.Schema{ - SchemaProps: spec.SchemaProps{ - Default: "", - Type: []string{"string"}, - Format: "", - }, - }, - }, - }, - }, - "ingressIPs": { - VendorExtensible: spec.VendorExtensible{ - Extensions: spec.Extensions{ - "x-kubernetes-list-type": "set", - }, - }, - SchemaProps: spec.SchemaProps{ - Description: "ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - Type: []string{"array"}, - Items: &spec.SchemaOrArray{ - Schema: &spec.Schema{ - SchemaProps: spec.SchemaProps{ - Default: "", - Type: []string{"string"}, - Format: "", - }, - }, - }, - }, - }, - "machineNetworks": { - VendorExtensible: spec.VendorExtensible{ - Extensions: spec.Extensions{ - "x-kubernetes-list-type": "set", - }, - }, - SchemaProps: spec.SchemaProps{ - Description: "machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example \"10.0.0.0/8\" or \"fd00::/8\".", - Type: []string{"array"}, - Items: &spec.SchemaOrArray{ - Schema: &spec.Schema{ - SchemaProps: spec.SchemaProps{ - Default: "", - Type: []string{"string"}, - Format: "", - }, - }, - }, - }, - }, - }, }, }, } @@ -9397,26 +9335,6 @@ func schema_openshift_api_config_v1_BareMetalPlatformStatus(ref common.Reference Ref: ref("github.com/openshift/api/config/v1.BareMetalPlatformLoadBalancer"), }, }, - "machineNetworks": { - VendorExtensible: spec.VendorExtensible{ - Extensions: spec.Extensions{ - "x-kubernetes-list-type": "set", - }, - }, - SchemaProps: spec.SchemaProps{ - Description: "machineNetworks are IP networks used to connect all the OpenShift cluster nodes.", - Type: []string{"array"}, - Items: &spec.SchemaOrArray{ - Schema: &spec.Schema{ - SchemaProps: spec.SchemaProps{ - Default: "", - Type: []string{"string"}, - Format: "", - }, - }, - }, - }, - }, }, Required: []string{"apiServerInternalIPs", "ingressIPs"}, }, @@ -16218,68 +16136,6 @@ func schema_openshift_api_config_v1_OpenStackPlatformSpec(ref common.ReferenceCa SchemaProps: spec.SchemaProps{ Description: "OpenStackPlatformSpec holds the desired state of the OpenStack infrastructure provider. This only includes fields that can be modified in the cluster.", Type: []string{"object"}, - Properties: map[string]spec.Schema{ - "apiServerInternalIPs": { - VendorExtensible: spec.VendorExtensible{ - Extensions: spec.Extensions{ - "x-kubernetes-list-type": "set", - }, - }, - SchemaProps: spec.SchemaProps{ - Description: "apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - Type: []string{"array"}, - Items: &spec.SchemaOrArray{ - Schema: &spec.Schema{ - SchemaProps: spec.SchemaProps{ - Default: "", - Type: []string{"string"}, - Format: "", - }, - }, - }, - }, - }, - "ingressIPs": { - VendorExtensible: spec.VendorExtensible{ - Extensions: spec.Extensions{ - "x-kubernetes-list-type": "set", - }, - }, - SchemaProps: spec.SchemaProps{ - Description: "ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - Type: []string{"array"}, - Items: &spec.SchemaOrArray{ - Schema: &spec.Schema{ - SchemaProps: spec.SchemaProps{ - Default: "", - Type: []string{"string"}, - Format: "", - }, - }, - }, - }, - }, - "machineNetworks": { - VendorExtensible: spec.VendorExtensible{ - Extensions: spec.Extensions{ - "x-kubernetes-list-type": "set", - }, - }, - SchemaProps: spec.SchemaProps{ - Description: "machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example \"10.0.0.0/8\" or \"fd00::/8\".", - Type: []string{"array"}, - Items: &spec.SchemaOrArray{ - Schema: &spec.Schema{ - SchemaProps: spec.SchemaProps{ - Default: "", - Type: []string{"string"}, - Format: "", - }, - }, - }, - }, - }, - }, }, }, } @@ -16357,26 +16213,6 @@ func schema_openshift_api_config_v1_OpenStackPlatformStatus(ref common.Reference Ref: ref("github.com/openshift/api/config/v1.OpenStackPlatformLoadBalancer"), }, }, - "machineNetworks": { - VendorExtensible: spec.VendorExtensible{ - Extensions: spec.Extensions{ - "x-kubernetes-list-type": "set", - }, - }, - SchemaProps: spec.SchemaProps{ - Description: "machineNetworks are IP networks used to connect all the OpenShift cluster nodes.", - Type: []string{"array"}, - Items: &spec.SchemaOrArray{ - Schema: &spec.Schema{ - SchemaProps: spec.SchemaProps{ - Default: "", - Type: []string{"string"}, - Format: "", - }, - }, - }, - }, - }, }, Required: []string{"apiServerInternalIPs", "ingressIPs"}, }, @@ -18904,66 +18740,6 @@ func schema_openshift_api_config_v1_VSpherePlatformSpec(ref common.ReferenceCall Ref: ref("github.com/openshift/api/config/v1.VSpherePlatformNodeNetworking"), }, }, - "apiServerInternalIPs": { - VendorExtensible: spec.VendorExtensible{ - Extensions: spec.Extensions{ - "x-kubernetes-list-type": "set", - }, - }, - SchemaProps: spec.SchemaProps{ - Description: "apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - Type: []string{"array"}, - Items: &spec.SchemaOrArray{ - Schema: &spec.Schema{ - SchemaProps: spec.SchemaProps{ - Default: "", - Type: []string{"string"}, - Format: "", - }, - }, - }, - }, - }, - "ingressIPs": { - VendorExtensible: spec.VendorExtensible{ - Extensions: spec.Extensions{ - "x-kubernetes-list-type": "set", - }, - }, - SchemaProps: spec.SchemaProps{ - Description: "ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - Type: []string{"array"}, - Items: &spec.SchemaOrArray{ - Schema: &spec.Schema{ - SchemaProps: spec.SchemaProps{ - Default: "", - Type: []string{"string"}, - Format: "", - }, - }, - }, - }, - }, - "machineNetworks": { - VendorExtensible: spec.VendorExtensible{ - Extensions: spec.Extensions{ - "x-kubernetes-list-type": "set", - }, - }, - SchemaProps: spec.SchemaProps{ - Description: "machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example \"10.0.0.0/8\" or \"fd00::/8\".", - Type: []string{"array"}, - Items: &spec.SchemaOrArray{ - Schema: &spec.Schema{ - SchemaProps: spec.SchemaProps{ - Default: "", - Type: []string{"string"}, - Format: "", - }, - }, - }, - }, - }, }, }, }, @@ -19037,26 +18813,6 @@ func schema_openshift_api_config_v1_VSpherePlatformStatus(ref common.ReferenceCa Ref: ref("github.com/openshift/api/config/v1.VSpherePlatformLoadBalancer"), }, }, - "machineNetworks": { - VendorExtensible: spec.VendorExtensible{ - Extensions: spec.Extensions{ - "x-kubernetes-list-type": "set", - }, - }, - SchemaProps: spec.SchemaProps{ - Description: "machineNetworks are IP networks used to connect all the OpenShift cluster nodes.", - Type: []string{"array"}, - Items: &spec.SchemaOrArray{ - Schema: &spec.Schema{ - SchemaProps: spec.SchemaProps{ - Default: "", - Type: []string{"string"}, - Format: "", - }, - }, - }, - }, - }, }, Required: []string{"apiServerInternalIPs", "ingressIPs"}, }, diff --git a/openapi/openapi.json b/openapi/openapi.json index 90d40062db7..426a9b89a7d 100644 --- a/openapi/openapi.json +++ b/openapi/openapi.json @@ -4656,36 +4656,7 @@ }, "com.github.openshift.api.config.v1.BareMetalPlatformSpec": { "description": "BareMetalPlatformSpec holds the desired state of the BareMetal infrastructure provider. This only includes fields that can be modified in the cluster.", - "type": "object", - "properties": { - "apiServerInternalIPs": { - "description": "apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - "type": "array", - "items": { - "type": "string", - "default": "" - }, - "x-kubernetes-list-type": "set" - }, - "ingressIPs": { - "description": "ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - "type": "array", - "items": { - "type": "string", - "default": "" - }, - "x-kubernetes-list-type": "set" - }, - "machineNetworks": { - "description": "machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example \"10.0.0.0/8\" or \"fd00::/8\".", - "type": "array", - "items": { - "type": "string", - "default": "" - }, - "x-kubernetes-list-type": "set" - } - } + "type": "object" }, "com.github.openshift.api.config.v1.BareMetalPlatformStatus": { "description": "BareMetalPlatformStatus holds the current status of the BareMetal infrastructure provider. For more information about the network architecture used with the BareMetal platform type, see: https://github.com/openshift/installer/blob/master/docs/design/baremetal/networking-infrastructure.md", @@ -4726,15 +4697,6 @@ }, "$ref": "#/definitions/com.github.openshift.api.config.v1.BareMetalPlatformLoadBalancer" }, - "machineNetworks": { - "description": "machineNetworks are IP networks used to connect all the OpenShift cluster nodes.", - "type": "array", - "items": { - "type": "string", - "default": "" - }, - "x-kubernetes-list-type": "set" - }, "nodeDNSIP": { "description": "nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for BareMetal deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster.", "type": "string" @@ -8768,36 +8730,7 @@ }, "com.github.openshift.api.config.v1.OpenStackPlatformSpec": { "description": "OpenStackPlatformSpec holds the desired state of the OpenStack infrastructure provider. This only includes fields that can be modified in the cluster.", - "type": "object", - "properties": { - "apiServerInternalIPs": { - "description": "apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - "type": "array", - "items": { - "type": "string", - "default": "" - }, - "x-kubernetes-list-type": "set" - }, - "ingressIPs": { - "description": "ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - "type": "array", - "items": { - "type": "string", - "default": "" - }, - "x-kubernetes-list-type": "set" - }, - "machineNetworks": { - "description": "machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example \"10.0.0.0/8\" or \"fd00::/8\".", - "type": "array", - "items": { - "type": "string", - "default": "" - }, - "x-kubernetes-list-type": "set" - } - } + "type": "object" }, "com.github.openshift.api.config.v1.OpenStackPlatformStatus": { "description": "OpenStackPlatformStatus holds the current status of the OpenStack infrastructure provider.", @@ -8842,15 +8775,6 @@ }, "$ref": "#/definitions/com.github.openshift.api.config.v1.OpenStackPlatformLoadBalancer" }, - "machineNetworks": { - "description": "machineNetworks are IP networks used to connect all the OpenShift cluster nodes.", - "type": "array", - "items": { - "type": "string", - "default": "" - }, - "x-kubernetes-list-type": "set" - }, "nodeDNSIP": { "description": "nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for OpenStack deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster.", "type": "string" @@ -10351,15 +10275,6 @@ "description": "VSpherePlatformSpec holds the desired state of the vSphere infrastructure provider. In the future the cloud provider operator, storage operator and machine operator will use these fields for configuration.", "type": "object", "properties": { - "apiServerInternalIPs": { - "description": "apiServerInternalIPs are the IP addresses to contact the Kubernetes API server that can be used by components inside the cluster, like kubelets using the infrastructure rather than Kubernetes networking. These are the IPs for a self-hosted load balancer in front of the API servers. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.apiServerInternalIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - "type": "array", - "items": { - "type": "string", - "default": "" - }, - "x-kubernetes-list-type": "set" - }, "failureDomains": { "description": "failureDomains contains the definition of region, zone and the vCenter topology. If this is omitted failure domains (regions and zones) will not be used.", "type": "array", @@ -10368,24 +10283,6 @@ "$ref": "#/definitions/com.github.openshift.api.config.v1.VSpherePlatformFailureDomainSpec" } }, - "ingressIPs": { - "description": "ingressIPs are the external IPs which route to the default ingress controller. The IPs are suitable targets of a wildcard DNS record used to resolve default route host names. In dual stack clusters this list contains two IP addresses, one from IPv4 family and one from IPv6. In single stack clusters a single IP address is expected. When omitted, values from the status.ingressIPs will be used. Once set, the list cannot be completely removed (but its second entry can).", - "type": "array", - "items": { - "type": "string", - "default": "" - }, - "x-kubernetes-list-type": "set" - }, - "machineNetworks": { - "description": "machineNetworks are IP networks used to connect all the OpenShift cluster nodes. Each network is provided in the CIDR format and should be IPv4 or IPv6, for example \"10.0.0.0/8\" or \"fd00::/8\".", - "type": "array", - "items": { - "type": "string", - "default": "" - }, - "x-kubernetes-list-type": "set" - }, "nodeNetworking": { "description": "nodeNetworking contains the definition of internal and external network constraints for assigning the node's networking. If this field is omitted, networking defaults to the legacy address selection behavior which is to only support a single address and return the first one found.", "default": {}, @@ -10440,15 +10337,6 @@ }, "$ref": "#/definitions/com.github.openshift.api.config.v1.VSpherePlatformLoadBalancer" }, - "machineNetworks": { - "description": "machineNetworks are IP networks used to connect all the OpenShift cluster nodes.", - "type": "array", - "items": { - "type": "string", - "default": "" - }, - "x-kubernetes-list-type": "set" - }, "nodeDNSIP": { "description": "nodeDNSIP is the IP address for the internal DNS used by the nodes. Unlike the one managed by the DNS operator, `NodeDNSIP` provides name resolution for the nodes themselves. There is no DNS-as-a-service for vSphere deployments. In order to minimize necessary changes to the datacenter DNS, a DNS service is hosted as a static pod to serve those hostnames to the nodes in the cluster.", "type": "string"