Cannot install version 4.7.0.68 on arm64 alpine linux when using python 3.11 due to numpy version mismatch

[djryanj]

Expected behaviour

Wheel builds and installs on alpine Linux with python 3.11 installed.

Actual behaviour

Building wheel fails because numpy 1.21.2 is not compatible with python 3.11.

Error log:

Collecting opencv-python-headless
  Downloading opencv-python-headless-4.7.0.68.tar.gz (91.1 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 91.1/91.1 MB 5.6 MB/s eta 0:00:00
  Installing build dependencies: started
  Installing build dependencies: finished with status 'error'
  error: subprocess-exited-with-error
  
  × pip subprocess to install build dependencies did not run successfully.
  │ exit code: 1
  ╰─> [26 lines of output]
      Ignoring numpy: markers 'python_version == "3.6" and platform_machine != "aarch64" and platform_machine != "arm64"' don't match your environment
      Ignoring numpy: markers 'python_version == "3.7" and platform_machine != "aarch64" and platform_machine != "arm64"' don't match your environment
      Ignoring numpy: markers 'python_version == "3.8" and platform_machine != "aarch64" and platform_machine != "arm64"' don't match your environment
      Ignoring numpy: markers 'python_version <= "3.9" and sys_platform == "linux" and platform_machine == "aarch64"' don't match your environment
      Ignoring numpy: markers 'python_version <= "3.9" and sys_platform == "darwin" and platform_machine == "arm64"' don't match your environment
      Ignoring numpy: markers 'python_version == "3.9" and platform_machine != "aarch64" and platform_machine != "arm64"' don't match your environment
      Ignoring numpy: markers 'python_version >= "3.10" and platform_system == "Darwin"' don't match your environment
      Collecting setuptools==59.2.0
        Using cached setuptools-59.2.0-py3-none-any.whl (952 kB)
      Collecting wheel==0.37.0
        Using cached wheel-0.37.0-py2.py3-none-any.whl (35 kB)
      Collecting cmake>=3.1
        Downloading cmake-3.25.2-py2.py3-none-musllinux_1_1_aarch64.whl (23.9 MB)
           ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 23.9/23.9 MB 10.8 MB/s eta 0:00:00
      Collecting pip
        Downloading pip-23.0.1-py3-none-any.whl (2.1 MB)
           ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.1/2.1 MB 12.6 MB/s eta 0:00:00
      Collecting scikit-build>=0.13.2
        Downloading scikit_build-0.16.7-py3-none-any.whl (79 kB)
           ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 79.0/79.0 kB 3.9 MB/s eta 0:00:00
      ERROR: Ignored the following versions that require a different python version: 1.21.2 Requires-Python >=3.7,<3.11; 1.21.3 Requires-Python >=3.7,<3.11; 1.21.4 Requires-Python >=3.7,<3.11; 1.21.5 Requires-Python >=3.7,<3.11; 1.21.6 Requires-Python >=3.7,<3.11
      ERROR: Could not find a version that satisfies the requirement numpy==1.21.2 (from versions: 1.3.0, 1.4.1, 1.5.0, 1.5.1, 1.6.0, 1.6.1, 1.6.2, 1.7.0, 1.7.1, 1.7.2, 1.8.0, 1.8.1, 1.8.2, 1.9.0, 1.9.1, 1.9.2, 1.9.3, 1.10.0.post2, 1.10.1, 1.10.2, 1.10.4, 1.11.0, 1.11.1, 1.11.2, 1.11.3, 1.12.0, 1.12.1, 1.13.0, 1.13.1, 1.13.3, 1.14.0, 1.14.1, 1.14.2, 1.14.3, 1.14.4, 1.14.5, 1.14.6, 1.15.0, 1.15.1, 1.15.2, 1.15.3, 1.15.4, 1.16.0, 1.16.1, 1.16.2, 1.16.3, 1.16.4, 1.16.5, 1.16.6, 1.17.0, 1.17.1, 1.17.2, 1.17.3, 1.17.4, 1.17.5, 1.18.0, 1.18.1, 1.18.2, 1.18.3, 1.18.4, 1.18.5, 1.19.0, 1.19.1, 1.19.2, 1.19.3, 1.19.4, 1.19.5, 1.20.0, 1.20.1, 1.20.2, 1.20.3, 1.21.0, 1.21.1, 1.22.0, 1.22.1, 1.22.2, 1.22.3, 1.22.4, 1.23.0rc1, 1.23.0rc2, 1.23.0rc3, 1.23.0, 1.23.1, 1.23.2, 1.23.3, 1.23.4, 1.23.5, 1.24.0rc1, 1.24.0rc2, 1.24.0, 1.24.1, 1.24.2)
      ERROR: No matching distribution found for numpy==1.21.2
      
      [notice] A new release of pip is available: 23.0 -> 23.0.1
      [notice] To update, run: pip install --upgrade pip
      [end of output]
  
  note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error

× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.

[notice] A new release of pip is available: 23.0 -> 23.0.1
[notice] To update, run: pip install --upgrade pip

Steps to reproduce

Using Docker:

ARG TARGETPLATFORM=linux/arm64
FROM --platform=$TARGETPLATFORM python:3.11-alpine
RUN pip install --upgrade pip
RUN apk update && apk add --no-cache build-base gcc python3-dev musl-dev libffi-dev g++ linux-headers make

RUN pip install numpy
RUN pip install opencv-python-headless

docker build -t alpine-python-311-opencv .

Notes

• If you're not on an arm64/aarch64 system, you might need to use buildkit (docker buildx build) to reproduce.
• this happens with either headless or regular versions.
• by default, pip install numpy installs numpy==1.24.2 right now. If you try to pin it to pip install numpy==1.21.2 then the same error occurs:

      ERROR: Ignored the following versions that require a different python version: 1.21.2 Requires-Python >=3.7,<3.11; 1.21.3 Requires-Python >=3.7,<3.11; 1.21.4 Requires-Python >=3.7,<3.11; 1.21.5 Requires-Python >=3.7,<3.11; 1.21.6 Requires-Python >=3.7,<3.11

Issue submission checklist

• This is not a generic OpenCV usage question (looking for help for coding, other usage questions, homework etc.)
• I have read the README of this repository and understand that this repository provides only an automated build toolchain for OpenCV Python packages (there is no actual OpenCV code here)
• The issue is related to the build scripts in this repository, to the pre-built binaries or is a feature request (such as "please enable this additional dependency")
• I'm using the latest version of opencv-python

[asmorkalov]

Thanks for the report. The same issue is reproducible with x86 docker image too.

[asmorkalov]

It looks like classic manylinux2014 and musl-linux have different list of numpy versions:
For manylinux:

from versions: 1.3.0, 1.4.1, 1.5.0, 1.5.1, 1.6.0, 1.6.1, 1.6.2, 1.7.0, 1.7.1, 1.7.2, 1.8.0, 1.8.1, 1.8.2, 1.9.0, 1.9.1, 1.9.2, 1.9.3, 1.10.0.post2, 1.10.1, 1.10.2, 1.10.4, 1.11.0, 1.11.1, 1.11.2, 1.11.3, 1.12.0, 1.12.1, 1.13.0, 1.13.1, 1.13.3, 1.14.0, 1.14.1, 1.14.2, 1.14.3, 1.14.4, 1.14.5, 1.14.6, 1.15.0, 1.15.1, 1.15.2, 1.15.3, 1.15.4, 1.16.0, 1.16.1, 1.16.2, 1.16.3, 1.16.4, 1.16.5, 1.16.6, 1.17.0, 1.17.1, 1.17.2, 1.17.3, 1.17.4, 1.17.5, 1.18.0, 1.18.1, 1.18.2, 1.18.3, 1.18.4, 1.18.5, 1.19.0, 1.19.1, 1.19.2, 1.19.3, 1.19.4, 1.19.5, 1.20.0, 1.20.1, 1.20.2, 1.20.3, 1.21.0, 1.21.1, 1.21.2, 1.21.3, 1.21.4, 1.21.5, 1.21.6, 1.22.0, 1.22.1, 1.22.2, 1.22.3, 1.22.4, 1.23.0rc1, 1.23.0rc2, 1.23.0rc3, 1.23.0, 1.23.1, 1.23.2, 1.23.3, 1.23.4, 1.23.5, 1.24.0rc1, 1.24.0rc2, 1.24.0, 1.24.1, 1.24.2)

For musl (Alpine):

from versions: 1.3.0, 1.4.1, 1.5.0, 1.5.1, 1.6.0, 1.6.1, 1.6.2, 1.7.0, 1.7.1, 1.7.2, 1.8.0, 1.8.1, 1.8.2, 1.9.0, 1.9.1, 1.9.2, 1.9.3, 1.10.0.post2, 1.10.1, 1.10.2, 1.10.4, 1.11.0, 1.11.1, 1.11.2, 1.11.3, 1.12.0, 1.12.1, 1.13.0, 1.13.1, 1.13.3, 1.14.0, 1.14.1, 1.14.2, 1.14.3, 1.14.4, 1.14.5, 1.14.6, 1.15.0, 1.15.1, 1.15.2, 1.15.3, 1.15.4, 1.16.0, 1.16.1, 1.16.2, 1.16.3, 1.16.4, 1.16.5, 1.16.6, 1.17.0, 1.17.1, 1.17.2, 1.17.3, 1.17.4, 1.17.5, 1.18.0, 1.18.1, 1.18.2, 1.18.3, 1.18.4, 1.18.5, 1.19.0, 1.19.1, 1.19.2, 1.19.3, 1.19.4, 1.19.5, 1.20.0, 1.20.1, 1.20.2, 1.20.3, 1.21.0, 1.21.1, 1.22.0, 1.22.1, 1.22.2, 1.22.3, 1.22.4, 1.23.0rc1, 1.23.0rc2, 1.23.0rc3, 1.23.0, 1.23.1, 1.23.2, 1.23.3, 1.23.4, 1.23.5, 1.24.0rc1, 1.24.0rc2, 1.24.0, 1.24.1, 1.24.2

[asmorkalov]

I extended PR #790 to handle Python 3.11 issue too.

[asmorkalov]

Fixed in 4.7.0.70