Skip to content

Latest commit

 

History

History
1846 lines (1545 loc) · 88.9 KB

gnmi-specification.md

File metadata and controls

1846 lines (1545 loc) · 88.9 KB
Raw

gRPC Network Management Interface (gNMI)

Contributors: Paul Borman, Marcus Hines, Carl Lebsack, Chris Morrow, Anees Shaikh, Rob Shakir, Wen Bo Li, Darren Loher

Date: May 25, 2023

Version: 0.10.0

gNMI service compatibility: 0.10.x

Table of Contents

1 Introduction

This document defines a gRPC-based protocol for the modification and retrieval of configuration from a target device, as well as the control and generation of telemetry streams from a target device to a data collection system. The intention is that a single gRPC service definition can cover both configuration and telemetry - allowing a single implementation on the target, as well as a single NMS element to interact with the device via telemetry and configuration RPCs.

All messages within the gRPC service definition are defined as protocol buffers (specifically proto3). gRPC service definitions are expected to be described using the relevant features of the protobuf IDL. The protobuf definition of gNMI is maintained in the openconfig/gnmi GitHub repository.

The service defined within this document is assumed to carry payloads that contain data instances of OpenConfig YANG schemas, but can be used for any data with the following characteristics:

  1. structure can be represented by a tree structure where nodes can be uniquely identified by a path consisting of node names, or node names coupled with attributes;
  2. values can be serialised into a scalar object.

Currently, values may be serialised to a scalar object through encoding as a JSON string or a Protobuf type - although the definition of new serialisations is possible.

Throughout this specification the following terminology is used:

  • Telemetry - refers to streaming data relating to underlying characteristics of the device - either operational state or configuration.
  • Configuration - elements within the data schema which are read/write and can be manipulated by the client.
  • Target - the device within the protocol which acts as the owner of the data that is being manipulated or reported on. Typically this will be a network device.
  • Client - the device or system using the protocol described in this document to query/modify data on the target, or act as a collector for streamed data. Typically this will be a network management system.

2 Common Message Types and Encodings

2.1 Reusable Notification Message Format

When a target wishes to communicate data relating to the state of its internal database to an interested client, it does so via means of a common Notification message. Notification messages are reused in other higher-layer messages for various purposes. The exact use of the Notification message is described on a per-RPC basis.

The fields of the Notification message are as follows:

  • timestamp - The time at which the data was collected by the device from the underlying source, or the time that the target generated the Notification message (in the case that the data does not reflect an underlying data source). This value is always represented according to the definition in 2.2.1.
  • prefix - a prefix which is applied to all path fields (encoded as per 2.2.2) included in the Notification message. The paths expressed within the message are formed by the concatenation of prefix + path. The prefix always precedes the path elements. Further semantics of prefixes are described in 2.4.1.
  • update - a list of update messages that indicate changes in the underlying data of the target. Both modification and creation of data is expressed through the update message.
    • An Update message has three subfields:
      • path - a path encoded as per 2.2.2.
      • val - a value encoded as per 2.2.3.
      • duplicates - a counter value that indicates the number of coalesced duplicates. If a client is unable to keep up with the server, coalescion can occur on a per update (i.e., per path) basis such that the server can discard previous values for a given update and return only the latest. In this case the server SHOULD increment a count associated with the update such that a client can detect that transitions in the state of the path have occurred, but were suppressed due to its inability to keep up.
    • The set of paths that are specified within the list of updates MUST be unique. In this context, the path is defined to be the fully resolved path (including the prefix). In the case that there is a duplicate path specified within an update, only the final update should be processed by the receiving entity.
  • delete - a list of paths (encoded as per 2.2.2) that indicate the deletion of data nodes on the target.

The creator of a Notification message MUST include the timestamp field. All other fields are optional.

2.2 Common Data Types

2.2.1 Timestamps

Timestamp values MUST be represented as the number of nanoseconds since the Unix epoch (January 1st 1970 00:00:00 UTC). The value MUST be encoded as a signed 64-bit integer (int64)1.

2.2.2 Paths

Paths are represented according to gNMI Path Conventions, which defines a structured format for path elements, and any associated key values. Rather than utilising a single string to represent the path - with the / character separating each element of the path, the path is represented by an ordered list of PathElem messages, starting at the root node, and ending at the most specific path element. Each PathElem message contains the name of the node within the data tree, along with any associated keys/attributes that may be required for it. Keys are contained within a map<string, string> where the key of the map is the name of the key element, and the value is the key's value encoded as a string.

A path is represented by the Path message with the following fields:

  • origin - a field which MAY be used to assert the schema the path belongs to. A detailed description of origin is provided in 2.7.
  • elem - an array of PathElem messages, each containing the name of the element, and any associated keys.
  • target - the name of the target for which the path is a member. Only set in prefix for a path. Elaboration of this field is in 2.2.2.1.

Each Path element should correspond to a node in the data tree. For example, the path /a/b/c/d is encoded as:

path: <
  elem: <
    name: "a"
  >
  elem: <
    name: "b"
  >
  elem: <
    name: "c"
  >
  elem: <
    name: "d"
  >
>

Where attributes are to be specified, these are encoded alongside the node name within the path element, for example a node specified by /a/e[key=k1]/f/g would have the path encoded as:

path: <
  elem: <
    name: "a"
  >
  elem: <
    name: "e"
    key: <
      key: "key"
      value: "k1"
    >
  >
  elem: <
    name: "f"
  >
  elem: <
    name: "g"
  >
>

The root node (/) is encoded as a zero-length array (slice) of PathElem messages within the elem field.

path: <
>

Paths (defined to be the concatenation of the prefix and path within the message) specified within a message MUST be absolute - no messages with relative paths should be generated.

2.2.2.1 Path Target

The target field within a path is name for the target. This field MUST only ever be present on prefix paths in the corresponding request and response messages. This field is optional for clients. When set in the prefix in a request, GetRequest, SetRequest or SubscribeRequest, the field MUST be reflected in the prefix of the corresponding GetResponse, SetResponse or SubscribeResponse by a server. This field is used to allow a name to be associated with all the data for a given stream if requested by a client. If a client does not set this field in the prefix of a request, it MUST NOT be set in the prefix of the corresponding response messages. The value for target is tied to the context of a client RPC and not persisted or shared among multiple clients.

2.2.3 Node Values

The value of a data node (or subtree) is encoded in a TypedValue message as a oneof field to allow selection of the data type by setting exactly one of the member fields. The possible data types include:

  • scalar types
  • structured data types (e.g., to encode objects or subtrees)

Several native scalar protobuf types are included in the TypedValue message:

  • string in the string_val field - defined to carry all string values (including enumerated values represented as a string)
  • int64 in the int_val field (storing all signed integer types - i.e., int8, int16, int32, int64).
  • uint64 in the uint_val field (used to store all unsigned integer types - i.e., uint8, uint16, uint32, uint64).
  • bool in the bool_val field, used to store boolean values.
  • bytes (see 2.3.2)
  • float in the double_val field, used to store floating-point values (i.e., float32, float64).
  • Note: All values defined using the YANG decimal64 datatype should also be encoded as double_val when PROTO encoding is requested. Direct support of Decimal64 has been deprecated.

Additional defined data types include:

  • ScalarArray in the leaflist_val field -- a message encoding a mixed-type scalar array; contains single repeated field:
    • element -- a TypedValue element within the array. The type of each element MUST be a scalar type (i.e., one of the scalar types).

The remaining fields in the TypedValue message define structured data types. Section 2.3 describes these further.

2.3 Structured data types

When structured data is sent by the client or the target in an Update message, it MUST be serialized according to one of the supported encodings listed in the Encoding enumeration. The table below lists the supported encodings and their corresponding TypedValue fields, followed by further details on each encoding type. It should be noted that the target never utilises the Encoding enumeration to declare to the client the type of encoding utilised, hence the client must infer the encoding from the populated TypedValue field.

Name Description TypedValue field Encoding Value
JSON A JSON encoded string as per 2.3.1. json_val 0
Bytes An arbitrary sequence of bytes as per 2.3.2. bytes_val 1
Proto A Protobuf encoded message using scalar values as per Section 2.3.3. string_val, int_val, uint_val, bool_val, bytes_val, float_val, leaflist_val 2
ASCII An ASCII encoded string representing text formatted according to a target-defined convention (described in Section 2.3.4). ascii_val 3
JSON_IETF A JSON encoded string as per 2.3.1 using JSON encoding compatible with RFC 7951. json_ietf_val 4

2.3.1 JSON and JSON_IETF

The JSON type indicates that the value is encoded as a JSON string. This format utilises the specification in RFC7159. Additional types (e.g., JSON_IETF) are utilised to indicate specific additional characteristics of the encoding of the JSON data (particularly where they relate to serialisation of YANG-modeled data).

For any JSON encoding:

  • In the case that the data item at the specified path is a leaf node (i.e., has no children, and an associated value) the value of that leaf is encoded directly - i.e., the "bare" value is specified (i.e., a JSON object is not required, and a bare JSON value is included).
  • Where the data item referred to has child nodes, the val field contains a serialised JSON entity (object or array) corresponding to the referenced item.

Using the following example data tree:

 root +
      |
      +-- a +
            |
            +-- b[name=b1] +
                           |
                           +-- c +
                                 |
                                 +-- d (string)
                                 +-- e (uint32)

The following serialisations would be used (note that the examples below follow the conventions for textproto, and Go-style backticks are used for string literals that would otherwise require escaping):

For /a/b[name=b1]/c/d:

update: <
  path: <
    elem: <
      name: "a"
    >
    elem: <
      name: "b"
      key: <
        key: "name"
        value: "b1"
      >
    >
    elem: <
      name: "c"
    >
    elem: <
      name: "d"
    >
  >
  val: <
    json_val: "AStringValue"
  >
>

For /a/b[name=b1]/c/e:

update: <
  path: <
    elem: <
      name: "a"
    >
    elem: <
      name: "b"
      key: <
        key: "name"
        value: "b1"
      >
    >
    elem: <
      name: "c"
    >
    elem: <
      name: "e"
    >
  >
  val: <
    json_val: 10042    // decoded byte array
  >
>

For /a/b[name=b1]/c:

update: <
  path: <
    elem: <
      name: "a"
    >
    elem: <
      name: "b"
      key: <
        key: "name"
        value: "b1"
      >
    >
    elem: <
      name: "c"
    >
  >
  val: <
    json_val: `{ "d": "AStringValue", "e": 10042 }`
  >
>

For /a :

update: <
  path: <
    elem: <
      name: "a'
    >
  >
  val: <
    json_ietf_val: `{ "b": [
                      {
                        "name": "b1",
                        "c": {
                        "d": "AStringValue",
                          "e": 10042
                        }
                       }
                   ]
            }`
  >
>

Note that all JSON values MUST be valid JSON. That is to say, while a value or object may be included in the message, the relevant quoting according to the JSON specification in RFC7159 must be used. This results in quoted string values, and unquoted number values.

JSON_IETF encoded data MUST conform with the rules for JSON serialisation described in RFC7951. Data specified with a type of JSON MUST be valid JSON, but no additional constraints are placed upon it. An implementation MUST NOT serialise data with mixed JSON and JSON_IETF encodings.

Both the client and target MUST support the JSON encoding as a minimum.

2.3.2 Bytes

Data encoded using the BYTES type (i.e., with the byte_val field) contains a byte sequence whose semantics is opaque to the protocol.

2.3.3 Protobuf

Data encoded using the PROTOBUF type should use the TypedValue message using primitive types as described in Section 2.2.3.

2.3.4 ASCII

The ASCII type indicates that the data contains system-formatted ASCII encoded text. For configuration data, for example, this may consist of semi-structured CLI configuration data formatted according to the target platform. The gNMI protocol does not define the format of the text – this must be established out-of-band.

2.4 Use of Data Schema Paths

2.4.1 Path Prefixes

In a number of messages, a prefix can be specified to reduce the lengths of path fields within the message. In this case, a prefix field is specified within a message - comprising of a valid path encoded according to Section 2.2.2. In the case that a prefix is specified, the absolute path is comprised of the concatenation of the list of path elements representing the prefix and the list of path elements in the path field.

For example, again considering the data tree shown in Section 2.3.1 if a Notification message updating values, a prefix could be used to refer to the /a/b[name=b1]/c/d and /a/b[name=b1]/c/e data nodes:

notification: <
  timestamp: (timestamp)      // timestamp as int64
  prefix: <
    elem: <
        name: "a"
      >
    elem: <
      name: "b"
      key: <
          key: "name"
         value: "b1"
        >
      >
     elem: <
       name: "c"
     >
  >
  update: <
    path: <
      elem: <
        name: "d"
      >
    >
    value: <
      val: <
        json_val: "AStringValue"
      >
    >
  >
  update: <
    path: <
      elem: <
       name: "e"
      >
    >
    val: <
      json_val: 10042      // converted to int representation
    >
  >
>

2.4.2 Interpretation of Paths Used in RPCs

When a client specifies a path within an RPC message which indicates a read, or retrieval of data, the path MUST be interpreted such that it refers to the node directly corresponding with the path and all its children. The path refers to the direct node and all descendent branches which originate from the node, recursively down to each leaf element. If specific nodes are expected to be excluded then an RPC MAY provide means to filter nodes, such as regular-expression based filtering, lists of excluded paths, or metadata-based filtering (based on annotations of the data schema being manipulated, should such annotations be available and understood by both client and target).

For example, consider the following data tree:

root +
     |
     +-- childA +
     |          |
     |          +-- leafA1
     |          +-- leafA2
     |          +-- childA3 --+
     |                        |
     |                        +-- leafA31
     |                        +-- leafA32
     |
     +-- childB +
                |
                +-- leafB1
                +-- leafB2

A path referring to "root" (which is represented by a path consisting of an empty set of elements) should result in the nodes childA and childB and all of their children (leafA1, leafA2, leafB1, leafB2, childA3, leafA31 and leafA32) being considered by the relevant operation.

In the case that the RPC is modifying the state of data (i.e., a write operation), such recursion is not required - rather the modification operation should be considered to be targeted at the node within the schema that is specified by the path, and the value should be deserialized such that it modifies the content of any child nodes if required to do so.

2.5 Error handling

Errors MUST be represented by a canonical gRPC error code (Java, Go, C++). The entity generating the error MUST specify a free-text string which indicates the context of the error, allowing the receiving entity to generate log entries that allow a human operator to understand the exact error that occurred, and its context, and MAY supply structured data encoded as protobuf.Any. Each RPC defines the meaning of the relevant canonical error codes within the context of the operation it performs.

The canonical error code that is chosen MUST consider the expected behavior of the client on receipt of the message. For example, error codes which indicate that a client may subsequently retry SHOULD only be used where retrying the RPC is expected to result in a different outcome.

Where the client or target wishes to indicate an error, it MUST use the Status message in the RPC return trailers.

The Status message consists of three fields:

  • code - a 32-bit integer value corresponding to the canonical gRPC error code
  • message - a human-readable string describing the error condition. This string is not expected to be machine-parsable, but rather provide contextual information which may be passed to upstream systems.
  • details - a repeated field of protobuf.Any messages that carry error details.

2.6 Schema Definition Models

The data tree supported by the target is expected to be defined by a set of schemas. The definition and format of these models is out of scope of this specification (YANG-modeled data is one example). In the case that such schema definitions are used, the client should be able to determine the models that are supported by the target, so that it can generate valid modifications to the data tree, and interpret the data returned by Get and Subscribe RPC calls.

Additionally, the client may wish to restrict the set of models that are utilised by the target so that it can validate the data returned to it against a specific set of data models. This is particularly relevant where the target may otherwise add new values to restricted value data elements (e.g., those representing an enumerated type), or augment new data elements into the data tree.

In order to allow the client to restrict the set of data models to be used when interacting with the target, the client MAY discover the set of models that are supported by the target using the Capabilities RPC described in Section 3.2. For subsequent Get and Subscribe RPCs, the client MAY specify the models to be used by the target. The set of models to use is expressed as a ModelData message, as specified in Section 2.6.1.

If the client specifies a set of models in a Get or Subscribe RPC, the target MUST NOT utilize data tree elements that are defined in schema modules outside the specified set. In addition, where there are data tree elements that have restricted value sets (e.g., enumerated types), and the set is extended by a module which is outside of the set, such values MUST NOT be used in data instances that are sent to the client. Where there are other elements of the schema that depend on the existence of such enumerated values, the target MUST NOT include such values in data instances sent to the client.

2.6.1 The ModelData message

The ModelData message describes a specific model that is supported by the target and used by the client. The fields of the ModelData message identify a data model registered in a model catalog, as described in [MODEL_CATALOG_DOC] (the schema of the catalog itself - expressed in YANG - is described in [MODEL_CATALOG_YANG]). Each model specified by a ModelData message may refer to a specific schema module, a bundle of modules, or an augmentation or deviation, as described by the catalog entry.

Each ModelData message contains the following fields:

  • name - name of the model expressed as a string.
  • organization - the organization publishing the model, expressed as a string.
  • version - the supported (or requested) version of the model, expressed as a string which represents the semantic version of the catalog entry.

The combination of name, organization, and version uniquely identifies an entry in the model catalog.

2.7 gNMI Origin in Path

The origin field in the Path message identifies a schema that the path belongs to. origin is encoded as a string. The path specified within the message is uniquely identified by the tuple of <origin, path>.

The origin field is valid in any context of a Path message. Typically it is used:

  • In a SetRequest to indicate a particular schema is being used to modify the target configuration.
  • In a GetRequest to retrieve the contents of a particular schema, or in a GetResponse to indicate that the payload contains data from a particular <origin, path> schema.
  • In a SubscribeRequest to subscribe to paths within a particular schema, or SubscribeResponse to indicate an update corresponds to a particular <origin, path> tuple.

If more than one origin is to be used within any message, a path in the prefix MUST NOT be specified, since a prefix applies to all paths within the message. In the case that a prefix is specified, it MUST specify any required origin. A single request MUST NOT specify origin in both prefix and path fields in any RPC payload messages.

2.7.1 Special Values of origin

Origin values are agreed out of band to the gNMI protocol. Currently, special values are registered within this section of this document. Should additional origins be defined, a registry will be defined.

Where the origin field is unspecified, its value should default to openconfig. It is RECOMMENDED that the origin is explictly set.

Where the origin field is set to a command line interface format, the path should be ignored and the value specified within the Update considered as CLI input.

CLI configuration is defined as the command line interface text used for configuration. In gNMI, this is encoded as ASCII text. The format of the ASCII text is agreed to out of band from gNMI. The string used to identify the CLI origin must be formatted as origin:<nos_cli>. Example values might include: xros_cli, junos_cli, srlinux_cli or any string which indicates the NOS name and the CLI designation.

2.7.2 Definition of origin for YANG-modelled Data

The openconfig-extensions:origin field MAY be utilised to determine the origin within which a particular module is instantiated. The specification of this extension is within openconfig-extensions.yang.

It should be noted that origin is distinct from namespace. Whilst a YANG namespace is defined at any depth within the schema tree, an origin is only used to disambiguate entire schema trees. That is to say, any element that is not at the root inherits its origin from its root entity, regardless of the YANG schema modules that make up that root.

2.7.3 Partial Specifications of Origin in Set

If a Set RPC specifies delete, update, or replace fields which include an origin within their Path messages, the corresponding change MUST be constrained to the specified origin. Particularly:

  • replace operations MUST only replace the contents of the specified origin at the specified path. Origins that are not specified within the SetRequest MUST NOT have their contents replaced. In order for a replace operation to replace any contents of an origin it must be explicitly specified in the SetRequest.
  • delete operations MUST delete only the contents at the specified path within the specified origin. To delete contents from multiple origins, a client MUST specify multiple paths within the delete of the SetRequest.

These rules apply where origins represent data that doesn't overlap. in some cases (e.g., CLI and OpenConfig) origins may reflect different 'views' on the same data, and thus their interaction is more complex. See union_replace for more details, and behavioural specifications for such origins.

2.7.4 Transactionality of Sets with multiple Origins

Where a SetRequest specifies more than one origin - i.e., two or more operations whose path include more than one origin - manipulations to all affected trees MUST be considered as a single transaction. That is to say, only if all transactions succeed should the SetResponse indicate success. If any of the transactions fail, the contents of all origins MUST be rolled back, and an error status returned upon responding to the Set RPC.

2.8 Extensions to gNMI

Each top-level RPC message (e.g., SubscribeRequest and SubscribeResponse for the Subscribe RPC) defines an extensions field which can be used to carry additional parameters for a gNMI RPC. [GNMI-EXT] defines the mechanisms to define such extensions. It must be noted that the base operation of the RPCs as described in this specification MUST NOT be modified by an extension.

3 Service Definition

A single gRPC service is defined - future revisions of this specification MAY result in additional services being introduced, and hence an implementation MUST NOT make assumptions that limit to a single service definition.

The service consists of the following RPCs:

  • Capabilities - defined in Section 3.2 and used by the client and target as an initial handshake to exchange capability information
  • Get - defined in Section 3.3, used to retrieve snapshots of the data on the target by the client.
  • Set - defined in Section 3.4 and used by the client to modify the state of the target.
  • Subscribe - defined in Section 3.5 and used to control subscriptions to data on the target by the client.

A target implementing the gNMI service SHOULD register against the gRPC server reflection service to allow clients to determine that gNMI is available on the target.

3.1 Session Security, Authentication and RPC Authorization

The session between the client and server MUST be encrypted using TLS - and a target or client MUST NOT fall back to unencrypted sessions. The target and client SHOULD implement TLS >= 1.2.

New connections are mutually authenticated -- each entity validates the X.509 certificate of the remote entity to ensure that the remote entity is both known, and authorized to connect to the local system.

If the target is expected to authenticate an RPC operation, the client MUST supply a username and password in the metadata of the RPC message (e.g., SubscribeRequest, GetRequest or SetRequest). If the client supplies username/password credentials, the target MUST authenticate the RPC per its local authentication functionality.

Authorization is also performed per-RPC by the server, through validating client-provided metadata. The client MAY include the appropriate AAA metadata, which MUST contain a username, and MAY include a password in the context of each RPC call it generates. If the client includes both username and password, the target MUST authenticate and authorize the request. If the client only supplies the username, the target MUST authorize the RPC request.

A more detailed discussion of the requirements for authentication and encryption used for gNMI is in [GNMI-AUTH].

3.2 Capability Discovery

A client MAY discover the capabilities of the target using the Capabilities RPC. The CapabilityRequest message is sent by the client to interrogate the target. The target MUST reply with a CapabilityResponse message that includes its gNMI service version, the versioned data models it supports, and the supported data encodings. This information is used in subsequent RPC messages from the client to indicate the set of models that the client will use (for Get, Subscribe as described in Section 2.6) , and the encoding to be used for the data.

When the client does not specify the models it is using, the target SHOULD use all data schema modules that it supports when considering the data tree to be addressed. If the client does not specify the encoding in an RPC message, it MUST send JSON encoded values (the default encoding).

3.2.1 The CapabilityRequest message

The CapabilityRequest message is sent by the client to request capability information from the target. The CapabilityRequest message carries a single repeated extension field, which is used as per the definition in Section 2.7.

3.2.2 The CapabilityResponse message

The CapabilityResponse message has the following fields:

  • supported_models - a set of ModelData messages (as defined in Section 2.6.1) describing each of the models supported by the target
  • supported_encodings - an enumeration field describing the data encodings supported by the target, as described in Section 2.3.
  • gNMI_version - the semantic version of the gNMI service supported by the target, specified as a string. The version should be interpreted as per [OPENCONFIG-SEMVER].
  • extension - a repeated field to carry gNMI extensions, which is used as per the definition in Section 2.7.

3.3 Retrieving Snapshots of State Information

In some cases, a client may require a snapshot of the state that exists on the target. In such cases, a client desires some subtree of the data tree to be serialized by the target and transmitted to it. It is expected that the values that are retrieved (whether writeable by the client or not) are collected immediately and provided to the client.

The Get RPC provides an interface by which a client can request a set of paths to be serialized and transmitted to it by the target. The client sends a GetRequest message to the target, specifying the data that is to be retrieved. The fields of the GetRequest message are described in Section 3.3.1.

Upon reception of a GetRequest, the target serializes the requested paths, and returns a GetResponse message. The target MUST reflect the values of the specified leaves at a particular collection time, which MAY be different for each path specified within the GetRequest message.

The target closes the Get RPC following the transmission of the GetResponse message.

3.3.1 The GetRequest Message

The GetRequest message contains the following fields:

  • prefix - a path (specified as per Section 2.2.2), and used as described in Section 2.4.1. The prefix is applied to all paths within the GetRequest message.
  • path - a set of paths (expressed as per Section 2.2.2) for which the client is requesting a data snapshot from the target. The path specified MAY utilize wildcards. In the case that the path specified is not valid, the target MUST return an RPC response indicating an error code of InvalidArgument and SHOULD provide information about the invalid path in the error message or details.
  • type - the type of data that is requested from the target. The valid values for type are described below.
  • encoding - the encoding that the target should utilise to serialise the subtree of the data tree requested. The type MUST be one of the encodings specified in Section 2.3. If the Capabilities RPC has been utilised, the client SHOULD use an encoding advertised as supported by the target. If the encoding is not specified, JSON MUST be used. If the target does not support the specified encoding, the target MUST return an error of Unimplemented. The error message MUST indicate that the specified encoding is unsupported.
  • use_models - a set of ModelData messages (defined in Section 2.6.1) indicating the schema definition modules that define the data elements that should be returned in response to the Get RPC call. The semantics of the use_models field are defined in Section 2.6.
  • extension - a repeated field to carry gNMI extensions, used as per the definition in Section 2.7.

Since the data tree stored by the target may consist of different types of data (e.g., values that are operational in nature, such as protocol statistics) - the client MAY specify that a subset of values in the tree are of interest. In order for such filtering to be implemented, the data schema on the target MUST be annotated in a manner which specifies the type of data for individual leaves, or subtrees of the data tree.

The types of data currently defined are:

  • CONFIG - specified to be data that the target considers to be read/write. If the data schema is described in YANG, this corresponds to the "config true" set of leaves on the target.
  • STATE - specified to be the read-only data on the target. If the data schema is described in YANG, STATE data is the "config false" set of leaves on the target.
  • OPERATIONAL - specified to be the read-only data on the target that is related to software processes operating on the device, or external interactions of the device.

If the type field is not specified, the target MUST return CONFIG, STATE and OPERATIONAL data fields in the tree resulting from the client's query.

3.3.2 The GetResponse Message

The GetResponse message consists of:

  • notification - a set of Notification messages, as defined in Section 2.1. The target MUST generate a Notification message for each path specified in the client's GetRequest, and hence MUST NOT collapse data from multiple paths into a single Notification within the response. The timestamp field of the Notification message MUST be set to the time at which the target's snapshot of the relevant path was taken.
  • extension - a repeated field used to carry gNMI extensions, as per the description in Section 2.7.

3.3.3 Considerations for using Get

The Get RPC is intended for clients to retrieve relatively small sets of data as complete objects, for example a part of the configuration. Such requests are not expected to put a significant resource burden on the target. Since the target is expected to return the entire snapshot in the GetResponse message, Get is not well-suited for retrieving very large data sets, such as the full contents of the routing table, or the entire component inventory. For such operations, the Subscribe RPC is the recommended mechanism, e.g. using the ONCE mode as described in Section 3.5.

Another consideration for Get is that the timestamp returned is associated with entire set of data requested, although individual data items may have been sampled by the target at different times. If the client requires higher accuracy for individual data items, the Subscribe RPC is recommended to request a telemetry stream (see Section 3.5.2).

3.3.4 GetResponse Behavior Table

The following table clarifies the target behaviors for Get for certain scenarios:

GetRequest Scenario Target Behavior
Requested paths exist or a YANG default value is in use. Value(s) are returned
Requested paths are syntactically correct but one or more paths neither exist (yet) nor has a YANG default value in use. Return NOT_FOUND
Requested paths are syntactically correct but one or more paths is not implemented by the server. Return UNIMPLEMENTED
One or more requested paths is syntactically incorrect. Return INVALID_ARGUMENT

3.4 Modifying State

Modifications to the state of the target are made through the Set RPC. A client sends a SetRequest message to the target indicating the modifications it desires.

A target receiving a SetRequest message processes the operations specified within it - which are treated as a transaction (see Section 3.4.3). Where a SetRequest contains delete, replace, and update fields, the server MUST process paths in the following order:

  1. deleted paths (within the delete field of the SetRequest)
  2. replaced paths (within the replace field)
  3. updated paths (within the update field)

A SetRequest containing union_replace operations MUST NOT contain delete, replace and update operations.

The order of the fields MUST be treated as significant within a single SetRequest message. If a single path is specified multiple times for a single operation (i.e., within update or replace), then the state of the target MUST reflect the application of all of the operations in order, even if they overwrite each other. A SetRequest specifying an empty set of paths MUST NOT be treated as an error by the target. For example, a SetRequest message carrying only extensions is valid.

In response to a SetRequest, the target MUST respond with a SetResponse message. For each operation specified in the SetRequest message, an UpdateResult message MUST be included in the response field of the SetResponse. The order in which the operations are applied MUST be maintained such that UpdateResult messages can be correlated to the SetRequest operations. In the case of a failure of an operation, the status of the UpdateResult message MUST be populated with error information as per the specification in Section 3.4.7. In addition, the status of the SetResponse message MUST be populated with an error message indicating the success or failure of the set of operations within the SetRequest message (again using the error handling behavior defined in Section 3.4.7).

3.4.1 The SetRequest Message

A SetRequest message consists of the following fields:

  • prefix - specified as per Section 2.4.1. The prefix specified is applied to all paths defined within other fields of the message.
  • delete - A set of paths, specified as per Section 2.2.2, which are to be removed from the data tree. A specification of the behavior of a delete is defined in Section 3.4.6.
  • union_replace - A set of Update messages specifying elements to union and then replace the data tree. See the gNMI union_replace specification for details.
  • replace - A set of Update messages indicating elements of the data tree whose content is to be replaced.
  • update - A set of Update messages indicating elements of the data tree whose content is to be updated.
  • extension - a repeated field used to carry gNMI extensions, as per the description in Section 2.7.

The semantics of "updating" versus "replacing" content are defined in Section 3.4.4.

A re-usable Update message is utilised to indicate changes to paths where a new value is required. The Update message contains two fields:

  • path - a path encoded as per Section 2.2.2 indicating the path of the element to be modified.
  • value - a value encoded as per Section 2.2.3 indicating the value applied to the specified node. The semantics of how the node is updated is dependent upon the context of the update message, as specified in Section 3.4.4.

3.4.2 The SetResponse Message

A SetResponse consists of the following fields:

  • prefix - specified as per Section 2.4.1. The prefix specified is applied to all paths defined within other fields of the message. The target MUST return an RPC response when the change is successfully applied. In cases where an update was not successfully applied, the contents of the status message used in the RPC response MUST be specified as per Section 3.4.7.
  • response - containing a list of responses, one per operation specified within the SetRequest message. Each response consists of an UpdateResult message with the following fields:
    • timestamp - a timestamp (encoded as per Section 2.2.1) at which the set request message was accepted by the system.
    • path - the path (encoded as per Section 2.2.2) specified within the SetRequest. In the case that a common prefix was not used within the SetRequest, the target MAY specify a prefix to reduce repetition of path elements within multiple UpdateResult messages in the request field.
    • op - the operation corresponding to the path. This value MUST be one of DELETE, REPLACE, or UPDATE.
    • message - a status message (as specified in Section 2.5). This field follows the same rules as the status field returned with the SetResponse message specified above.
  • extension - a repeated field used to carry gNMI extensions, as per the description in Section 2.7.

3.4.3 Transactions

All changes to the state of the target that are included in an individual SetRequest message are considered part of a transaction. That is, either all modifications within the request are applied, or the target MUST rollback the state changes to reflect its state before any changes were applied. The state of the target MUST NOT appear to be changed until such time as all changes have been accepted successfully. Hence, telemetry update messages MUST NOT reflect a change in state until such time as the intended modifications have been accepted.

As per the specification in Section 3.4, within an individual transaction (SetRequest) the order of operations is delete, union_replace, replace, update.

As the scope of a "transaction" is a single SetRequest message, a client desiring a set of changes to be applied together MUST ensure that they are encapsulated within a single SetRequest message.

3.4.4 Modes of Update: Union replace, Replace and Update

Changes to read-write values on the target are applied based on the union_replace, replace and update fields of the SetRequest message.

For these update operations, if the path specified does not exist, the target MUST create the data tree element and populate it with the data in the Update message, provided the path is valid according to the data tree schema. If invalid values are specified, the target MUST cease processing updates within the SetRequest method, return the data tree to the state prior to any changes, and return a SetResponse status indicating the error encountered.

Where the path specified refers to a node which itself represents the collection of objects (list, map, or array), a replace operation MUST remove all collection entries that are not supplied in the value provided in the SetRequest. An update operation MUST be considered to add new entries to the collection if they do not exist.

For union_replace operations, the contents contents shall be merged (unioned) and then applied as a replacement of the configuration. See the gNMI union_replace specification.

For replace operations:

  • If a particular path-value is specified in the client-supplied data, it is replaced with the client-specified value.
  • If a particular path-value is NOT specified in the client-supplied data and the path does not have a specified default value in the corresponding schema, it should be deleted.
  • If a path-value is NOT specified in the client-supplied data and the path does have a default value, it takes on the schema-specified default value.

For example, consider the following tree, where a schema defines the boolean b as having a default value of True and boolean c as having no default value. Both b and c have been previously set as False.

root +
     |
     + a --+
     |     |
     |     +-- b
     |     |
     |     +-- c
     |
     |
     + d --+
           +-- e
           |
           +-- f

A replace operation is issued where e and f are set, and all other elements are omitted. In this scenario, b MUST be reverted to its default setting of True and the configuration of c MUST be deleted from the tree, and returned to its original un-configured setting.

replace MUST not be used as a way to delete configuration at the path specified by being supplied with a null or invalid value. For example, it is invalid to replace a keyed list element (e.g. /a/f[k=10]) with an empty JSON object {}, which implicitly deletes the list's keys and renders the list element keyless. It is also invalid to replace a leaf value (e.g. the boolean b) with a nil value instead of a boolean value. In both of the above cases, the target MUST reject the operation by returning INVALID_ARGUMENT.

For update operations:

  • Only the value of those data elements that are specified explicitly should be treated as changed.
  • It is only possible to update or create new leaf elements, and not possible to delete leaf elements using an update operation.

For example, if an update operation to the root element / is done on the following data tree, where f[k=20] and f[k=30] are the elements that are in the SetRequest, then list element f[k=10] is untouched.

Before:

root +
     |
     + a --+
             |
             +-- f[k=10] --+
             |             |
             |             +-- k = 10
             |             +-- v = hello
             |
             +-- f[k=20] --+
                           |
                           +-- k = 20
                           +-- v = world

After:

root +
     |
     + a --+
             |
             +-- f[k=10] --+
             |             |
             |             +-- k = 10
             |             +-- v = hello
             |
             +-- f[k=20] --+
             |             |
             |             +-- k = 20
             |             +-- v = solar
             |
             +-- f[k=30] --+
                           |
                           +-- k = 30
                           +-- v = system

3.4.5 Modifying Paths Identified by Attributes

The path convention defined in Section 2.2.2 allows nodes in the data tree to be identified by a unique set of node names (e.g.,/a/b/c/d) or paths that consist of node names coupled with attributes (e.g., /a/e[key=10]). In the case where where a node name plus attribute name is required to uniquely identify an element (i.e., the path within the schema represents a list, map, or array), the following considerations apply:

  • In the case that multiple attribute values are required to uniquely address an element - e.g., /a/f[k1=10][k2=20]- and a replace or update operation's path specifies a subset of the attributes (e.g., /a/f[k1=10]) then this MUST be considered an error by the target system - and an status code ofInvalidArgument (3) specified.
  • In the case that key values are specified both as attributes of a node, and as their own elements within the data tree, update or replace operations that modify instances of the key in conflicting ways MUST be considered an error. The target MUST return a status code of InvalidArgument (3).

For example, consider a tree corresponding to the examples above, as illustrated below.

root +
     |
     + a --+
             |
             +-- f[k1=10][k2=20] --+
             |                     |
             |                     +-- k1 = 10
             |                     +-- k2 = 20
             |
             +-- f[k1=10][k2=21] --+
                                   |
                                   +-- k1 = 10
                                   +-- k2 = 21

In this case, nodes k1 and k2 are standalone nodes within the schema, but also correspond to attribute values for the node "f". In this case, an update or replace message specifying a path of /a/f[k1=10][k2=20] setting the value of k1 to 100 MUST be considered erroneous, and a status code of InvalidArgument (3) specified.

3.4.6 Deleting Configuration

Where a path is contained within the delete field of the SetRequest message, it should be removed from the target's data tree. In the case that the path specified is to an element that has children, these children MUST be recursively deleted. If a wildcard path is utilised, the wildcards MUST be expanded by the target, and the corresponding elements of the data tree deleted. Such wildcards MUST support paths specifying a subset of attributes required to identify entries within a collection (list, array, or map) of the data schema.

In the case that a path specifies an element within the data tree that does not exist, these deletes MUST be silently accepted.

3.4.7 Error Handling

When a client issues a SetRequest, and the target is unable to apply the specified changes, an error status MUST be reported to the client. The error is specified in multiple places:

  • The status returned with the SetResponse message indicates the completion status of the entire transaction.
  • With a UpdateResult message, where the message field indicates the completion status of the individual operation.

The RPC status supplied with the SetResponse message MUST reflect the overall result of the transaction.

In the case that any operation within the SetRequest message fails, then (as per Section 3.4.3), the target MUST NOT apply any of the specified changes, and MUST consider the transaction as failed. The target SHOULD set the status code of the SetResponse message to Aborted (10), along with an appropriate error message, and MUST set the message field of the UpdateResult corresponding to the failed operation to an Error message indicating failure. In the case that the processed operation is not the only operation within the SetRequest the target MUST set the message field of the UpdateResult messages for all other operations, setting the code field to Aborted (10).

For the operation that the target is unable to process, the code indicated in the status message returned within the RPC response MUST be set to a specific error code indicating the reason for failure based on the following mappings to canonical gRPC error codes:

  • When the client has specified metadata requiring authentication (see Section 3.1), and the authentication fails - Unauthenticated (16).
  • When the client does not have permission to modify the path specified by the operation - PermissionDenied (7).
  • When the operation specifies a path that cannot be parsed by the target - InvalidArgument (3). In this case, the message field of the returned status specified SHOULD specify human-readable text indicating that the path could not be parsed.
  • When the operation is an update, replace or union_replace operation that corresponds to a path that is not valid - NotFound (5). In this case the message field of the returned status message SHOULD specify human-readable text indicating the path that was invalid.
  • When the operation is an update, replace or union_replace operation that includes an invalid value within the Update message specified - InvalidArgument (3). This error SHOULD be used in cases where the payload specifies scalar values that do not correspond to the correct schema type.
  • When the client specifies a payload utilising an encoding that is not supported by the target (e.g., JSON) - Unimplemented (12) SHOULD be used to indicate that the encoding is not supported.

3.5 Subscribing to Telemetry Updates

When a client wishes to receive updates relating to the state of data instances on a target, it creates a subscription via the Subscribe RPC. A subscription consists of one or more paths, with a specified subscription mode. The mode of each subscription determines the triggers for updates for data sent from the target to the client.

All requests for new subscriptions are encapsulated within a SubscribeRequest message - which itself has a mode which describes the longevity of the subscription. A client may create a subscription which has a dedicated stream to return one-off data (ONCE); a subscription that utilizes a stream to periodically request a set of data (POLL); or a long-lived subscription that streams data according to the triggers specified within the individual subscription's mode (STREAM).

The target generates messages according to the type of subscription that has been created, at the frequency requested by the client. The methods to create subscriptions are described in Section 3.5.1.

Subscriptions are created for a set of paths - which cannot be modified throughout the lifetime of the subscription. In order to cancel a subscription, the client cancels the Subscribe RPC associated with the subscription, or terminates the entire gRPC session.

Subscriptions are fundamentally a set of independent update messages relating to the state of the data tree. That is, it is not possible for a client requesting a subscription to assume that the set of update messages received represent a snapshot of the data tree at a particular point in time. Subscriptions therefore allow a client to:

  • Receive ongoing updates from a target which allow synchronization between the client and target for the state of elements within the data tree. In this case (i.e., a STREAM subscription), a client creating a subscription receives an initial set of updates, terminated by a message indicating that initial synchronisation has completed, and then receives subsequent updates indicating changes to the initial state of those elements.
  • Receive a single view (polled, or one-off) for elements of the data tree on a per-data element basis according to the state that they are in at the time that the message is transmitted. This can be more resource efficient for both target and client than a GetRequest for large subtrees within the data tree. The target does not need to coalesce values into a single snapshot view, or create an in-memory representation of the subtree at the time of the request, and subsequently transmit this entire view to the client.

Based on the fact that subsequent update messages are considered to be independent, and to ensure that the efficiencies described above can be achieved, by default a target MUST NOT aggregate values within an update message.

In some cases, however, elements of the data tree may be known to change together, or need to be interpreted by the subscriber together. Such data MUST be explicitly marked in the schema as being eligible to be aggregated when being published. Additionally, the subscribing client MUST explicitly request aggregation of eligible schema elements for the subscription - by means of the allow_aggregation flag within a SubscriptionList message. For elements covered by a subscription that are not explicitly marked within the schema as being eligible for aggregation the target MUST NOT coalesce these values, regardless of the value of the allow_aggregation flag.

When aggregation is not permitted by the client or the schema each update message MUST contain a (key, value) pair - where the key MUST be a path to a single leaf element within the data tree (encoded according to Section 2.2.2). The value MUST encode only the value of the leaf specified. In most cases, this will be a scalar value (i.e., a JSON value if a JSON encoding is utilised), but in some cases, where an individual leaf element within the schema represents an object, it MAY represent a set of values (i.e., a JSON object or Protobuf message).

Where aggregation is permitted by both the client and schema, each update message MUST contain a key value pair, where the key MUST be the path to the element within the data tree which is explicitly marked as being eligible for aggregation. The value MUST be an object which encodes the children of the data tree element specified. For JSON, the value is therefore a JSON object, and for Protobuf is a binary-encoded Protobuf message (along with any child messages).

3.5.1 Managing Subscriptions

3.5.1.1 The SubscribeRequest Message

A SubscribeRequest message is sent by a client to request updates from the target for a specified set of paths.

The fields of the SubscribeRequest are as follows:

  • A group of fields, only one of which may be specified, which indicate the type of operation that the SubscribeRequest relates to. These are:
    • subscribe - a SubscriptionList message specifying a new set of paths that the client wishes to subscribe to.
    • poll- a Poll message used to specify (on an existing RPC) that the client wishes to receive a polled update for the paths specified within the subscription. The semantics of the Poll message are described in Section 3.5.1.5.3.
  • extension - a repeated field used to carry gNMI extensions, as per the description in Section 2.7.

In order to create a new subscription a client MUST initiate a Subscribe RPC with a SubscribeRequest message specifying the subscribe field. The SubscriptionList may create a one-off subscription, a poll-only subscription, or a streaming subscription. In the case of ONCE subscriptions, the RPC MUST be closed following the initial response generation with the relevant status code.

Subscriptions are set once, and subsequently not modified by a client. If a client wishes to subscribe to additional paths from a target, it MUST do so by sending an additional Subscribe RPC call, specifying a new SubscriptionList message. In order to end an existing subscription, a client simply cancels the Subscribe RPC that relates to that subscription. If an RPC is initiated with a SubscribeRequest message that does not specify a SubscriptionList message with the request field, the target MUST consider this an error. If an additional SubscribeRequest message specifying a SubscriptionList is sent via an existing RPC, the target MUST respond to this message with SubscribeResponse message indicating an error status, with a code of InvalidArgument (4); other Subscribe RPCs on the gRPC session MUST not be modified or terminated.

If a client initiates a Subscribe RPC with a SubscribeRequest message which does not contain a SubscriptionList message, this is an error. A SubscribeResponse message with the status indicating a error code of InvalidArgument MUST be sent, and the RPC closed. The status message SHOULD indicate that an out-of-order operation was requested on a non-existent subscription.

3.5.1.2 The SubscriptionList Message

A SubscriptionList message is used to indicate a set of paths for which common subscription behavior are required. The fields of the message are:

  • subscription - a set of Subscription messages that indicate the set of paths associated with the subscription list.
  • mode - the type of subscription that is being created. This may be ONCE (described in 3.5.1.5.1); STREAM (described in 3.5.1.5.2); or POLL (described in 3.5.1.5.3). The default value for the mode field is STREAM.
  • prefix- a common prefix that is applied to all paths specified within the message as per the definition in Section 2.4.1. The default prefix is null.
  • qos - a field describing the packet marking that is to be utilised for the responses to the subscription that is being created. This field has a single sub-value, marking, which indicates the DSCP value as a 32-bit unsigned integer. If the qos field is not specified, the device should export telemetry traffic using its default DSCP marking for management-plane traffic.
  • allow_aggregation - a boolean value used by the client to allow schema elements that are marked as eligible for aggregation to be combined into single telemetry update messages. By default, aggregation MUST NOT be used.
  • use_models - a ModelData message (as specified in Section 2.6.1) specifying the schema definition modules that the target should use when creating a subscription. When specified, the target MUST only consider data elements within the defined set of schema models as defined in Section 2.6. When use_models is not specified, the target MUST consider all data elements that are defined in all schema modules that it supports.
  • updates_only - a boolean that causes the server to send only updates to the current state. When set to true, the target MUST not transmit the current state of the paths that the client has subscribed to, but rather should send only updates to them. For STREAM subscriptions, an update occurs upon the next sample (in the case of SAMPLE subscriptions), or upon the next value change for ON_CHANGE subscriptions. For POLL and ONCE subscriptions, the target should send only the sync_response message, before proceeding to process poll requests (in the case of POLL) or closing the RPC (in the case of ONCE)."
  • extension - a repeated field used to carry gNMI extensions, as per the description in Section 2.7.

A client generating a SubscriptionList message MUST include the subscription field - which MUST be a non-empty set of Subscription messages, all other fields are optional.

3.5.1.3 The Subscription Message

A Subscription message generically describes a set of data that is to be subscribed to by a client. It contains a path, specified as per the definition in Section 2.2.2.

There is no requirement that the path specified in the message must exist within the current data tree on the server. While the path within the subscription SHOULD be a valid path within the set of schema modules that the target supports, subscribing to any syntactically valid path within such modules MUST be allowed. In the case that a particular path does not (yet) exist, the target MUST NOT close the RPC, and instead should continue to monitor for the existence of the path, and transmit telemetry updates should it exist in the future.

For POLL and STREAM subscriptions, a client may optionally specify additional parameters within the Subscription message. The semantics of these additional fields are described in the relevant section of this document.

3.5.1.4 The SubscribeResponse Message

A SubscribeResponse message is transmitted by a target to a client over an established Subscribe RPC. The message contains the following fields:

  • A set of fields referred to as the response fields, only one of which can be specified per SubscribeResponse message:
    • update - a Notification message providing an update value for a subscribed data entity as described in Section 3.5.2.3.
    • sync_response - a boolean field indicating that all data values corresponding to the path(s) specified in the SubscriptionList has been transmitted at least once, used for ONCE, POLL and STREAM subscriptions.
  • extension - a repeated field used to carry gNMI extensions, as per the description in Section 2.7.

SubscribeResponse messages with the update field set to a Notification are not required to be sent by the target in timestamp order, and client implementations MUST NOT assume that these messages will be received in timestamp order.

3.5.1.5 Creating Subscriptions

3.5.1.5.1 ONCE Subscriptions

A subscription operating in the ONCE mode acts as a single request/response channel. The target creates the relevant update messages, transmits them, and subsequently closes the RPC.

In order to create a one-off subscription, a client sends a SubscribeRequest message to the target. The subscribe field within this message specifies a SubscriptionList with the mode field set to ONCE. Updates corresponding to the subscription are generated as per the semantics described in Section 3.5.2.

Following the transmission of all updates which correspond to data items within the set of paths specified within the subscription list, a SubscribeResponse message with the sync_response field set to true MUST be transmitted, and the RPC via which the SubscribeRequest was received MUST be closed.

3.5.1.5.2 STREAM Subscriptions

Stream subscriptions are long-lived subscriptions which continue to transmit updates relating to the set of paths that are covered within the subscription indefinitely.

A STREAM subscription is created by sending a SubscribeRequest message with the subscribe field containing a SubscriptionList message with the type specified as STREAM. Each entry within the Subscription message is specified with one of the following modes:

  • On Change (ON_CHANGE) - when a subscription is defined to be "on change", data updates are only sent when the value of the data item changes.
    • For all ON_CHANGE subscriptions, the target MUST first generate updates for all paths that match the subscription path(s), and transmit them. Following this initial set of updates, updated values SHOULD only be transmitted when their value changes.
    • A heartbeat interval MAY be specified along with an "on change" subscription - in this case, the value of the data item(s) MUST be re-sent once per heartbeat interval regardless of whether the value has changed or not.
  • Sampled (SAMPLE) - a subscription that is defined to be sampled MUST be specified along with a sample_interval encoded as an unsigned 64-bit integer representing nanoseconds between samples. The value of the data item(s) MUST be sent once per sample interval to the client. If the target is unable to support the desired sample_interval it MUST reject the subscription by closing the Subscribe RPC specifying an InvalidArgument (3) error code. If the sample_interval is set to 0, the target MUST create the subscription and send the data with the lowest interval possible for the target.
    • Optionally, the suppress_redundant field of the Subscription message may be set for a sampled subscription. In the case that it is set to true, the target SHOULD NOT generate a telemetry update message unless the value of the path being reported on has changed since the last update was generated. Updates MUST only be generated for those individual leaf nodes in the subscription that have changed. That is to say that for a subscription to /a/b - where there are leaves c and d branching from the b node - if the value of c has changed, but d remains unchanged, an update for d MUST NOT be generated, whereas an update for c MUST be generated.
    • A heartbeat_interval MAY be specified to modify the behavior of suppress_redundant in a sampled subscription. In this case, the target MUST generate one telemetry update per heartbeat interval, regardless of whether the suppress_redundant flag is set to true. This value is specified as an unsigned 64-bit integer in nanoseconds.
  • Target Defined (TARGET_DEFINED) - when a client creates a subscription specifying the target defined mode, the target MUST determine the best type of subscription to be created on a per-leaf basis. That is to say, if the path specified within the message refers to some leaves which are event driven (e.g., the changing of state of an entity based on an external trigger) then an ON_CHANGE subscription may be created, whereas if other data represents counter values, a SAMPLE subscription may be created.
3.5.1.5.3 POLL Subscriptions

Polling subscriptions are used for on-demand retrieval of data items via long-lived RPCs. A poll subscription relates to a certain set of subscribed paths, and is initiated by sending a SubscribeRequest message with encapsulated SubscriptionList. Subscription messages contained within the SubscriptionList indicate the set of paths that are of interest to the polling client.

To retrieve data from the target, a client sends a SubscribeRequest message to the target, containing a poll field, specified to be an empty Poll message. On reception of such a message, the target MUST generate updates for all the corresponding paths within the SubscriptionList. Updates MUST be generated according to Section 3.5.2.3.

3.5.2 Sending Telemetry Updates

3.5.2.1 Bundling of Telemetry Updates

Since multiple Update messages can be included in the Notification message of a SubscribeResponse, it is possible for a target to bundle messages such that fewer messages are sent to the client. The advantage of such bundling is clearly to reduce the number of bytes on the wire (caused by message overhead); however, since only Notification messages contain the timestamp at which an event occurred, or a sample was taken, such bundling assigns a single timestamp for all bundled Update values. As such, bundling is primarily useful for datasets where a group of leaves are meaningfully conjoined, such as a group of leaves atomically applied as a configuration update via a Set call, system properties that are effectively static after boot and component inventory data including part, model and serial numbers.

For counter and event data where hardware provides precise timestamps, a gNMI implementation MUST NOT obscure access to these timestamps in an attempt to provide bundling. In cases where a leaf's value is derived from two or more hardware values with distinct timestamps, an implementation SHOULD attempt to provide a consistent and meaningful timestamp that introduces minimal error. This could include approaches such as attempting to synchronize collection of the values, retaining a consistent sample period and having a robust mechanism to ensure that sampling artifacts are not introduced (e.g. a constant rate byte flow over an interface appearing to have adjacent spikes and dips).

3.5.2.3 Sending Telemetry Updates

When an update for a subscribed telemetry path is to be sent, a SubscribeResponse message is sent from the target to the client, on the RPC associated with the subscription. The update field of the message contains a Notification message as per the description in Section 2.1. The timestamp field of the Notification message MUST be set to the time at which the value of the path that is being updated was collected from the underlying data source, or the event being reported on (in the case of ON_CHANGE occurred).

Where a leaf node's value has changed, or a new node has been created, an Update message specifying the path and value for the updated data item MUST be appended to the update field of the message.

Where a node within the subscribed paths has been removed, the delete field of the Notification message MUST have the path of the node that has been removed appended to it.

Explicit deletion is required to signify the removal of a leaf that is no longer present on a target device in ON-CHANGE subscription mode, and optional in SAMPLE subscription mode.

Additionally, deletes are not required to be per-leaf and can be at an intermediate branch that applies to a multitude of leaves, e.g. when removing a logical interface in a configuration, deletes could be issued at container level branches that apply to that interface, rather than all the individual leaves.

Explicit deletion also applies to TARGET-DEFINED subscription mode.
Whereas, if the TARGET-DEFINED subscription determines the best type of delivery to be ON-CHANGE, explicit deletion is required and if decided to be SAMPLE, deletion will be optional.

To replace the contents of an entire node within the tree, the target populates the delete field with the path of the node being removed, along with the new contents within the update field.

To signal that a leaf that has transitioned to using its default value, the target MUST send an update with the new value being set to the default value, and MUST NOT only send a delete for the path or a parent path.

When the target has transmitted the initial updates for all paths specified within the subscription, a SubscribeResponse message with the sync_response field set to true MUST be transmitted to the client to indicate that the initial transmission of updates has concluded. This provides an indication to the client that all of the existing data for the subscription has been sent at least once. For STREAM subscriptions, such messages are not required for subsequent updates. For POLL subscriptions, after each set of updates for individual poll request, a SubscribeResponse message with the sync_response field set to true MUST be generated.

In the case where the updates_only field in the SubscribeRequest message has been set, a sync_response is sent as the first message on the stream, followed by any updates representing subsequent changes to current state. For a POLL or ONCE mode, this means that only a sync_response will be sent. The updates_only field allows a client to only watch for changes, e.g. an update to configuration.

3.5.2.4 SubscribeResponse Behavior Table

The following table clarifies the target behaviors for Subscribe for certain scenarios:

Subscription Scenario ONCE/POLL STREAM
Subscribed paths exist or a YANG default value is in use. Value(s) are returned Value(s) are returned
Subscribed paths are syntactically correct but one or more paths neither exist (yet) nor has a YANG default value in use. No value returned for non-existent paths nothing is sent for non-existent paths (yet), RPC is not closed
Subscribed paths are syntactically correct but one or more paths is not implemented by the server. Return UNIMPLEMENTED Return UNIMPLEMENTED
One or more subscribed paths is syntactically incorrect. Return INVALID_ARGUMENT Return INVALID_ARGUMENT

4 Appendix: Current Protobuf Message and Service Specification

The latest Protobuf IDL gNMI specification is found in GitHub at openconfig/gnmi.

5 Appendix: Current Outstanding Issues/Future Features

  • Ability for the client to exclude paths from a subscription or get.
  • "Dial out" for the target to register with an NMS and publish pre-configured subscriptions.

6 Copyright

Copyright 2016 Google Inc.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License

7 Revision History

  • v0.10.0: May 25, 2023

    • Add union_replace operation. Sync revision to gNMI proto revision.

  • v0.8.3: April 18, 2023

    • Clarify that SetRequest replace on a list element with {} is invalid.

  • v0.8.2: November 28, 2022

    • Clarify difference between SetRequest update vs. replace when updating a keyed list.
    • Add gNMI service compatibility version.

  • v0.8.1: July 7, 2022

    • Clarify that for Subscribe, a transition to a YANG default value for a leaf must use update rather than just a delete.
    • Clarify that for Set, deleting configuration using replace(nil) is prohibited.
    • Clarify target behavior for certain scenarios for Get and Subscribe.

  • v0.8.0: April 28, 2022

    • Add 'double_val' in TypedValue message to replace both 'float_val' and decimal64_val.
    • Clarify format of responses when PROTO encoding is selected.

  • v0.7.0: May 22, 2018

    • Add 'atomic' boolean option to Notification message.

  • v0.6.0: January 25, 2018

    • Add extension fields to the top-level RPCs of the gNMI service.
    • Add recommendation that the gNMI service registers with the gRPC reflection service.
    • Clarifying wording for 'channel' such that it refers to a specific RPC, adopting gRPC nomenclature.
    • Editorial amendments.

  • v0.5.0: November 14, 2017

    • Add target field within Path message with description in Section 2.2.2.1
    • Add updates_only field within SubscribeRequest message.
    • Add duplicates field withing Update message.

  • v0.4.0: June 16, 2017

    • Deprecate the old value field within the Update message, in favour of the new TypedValue field.
    • Clarify error handling should use google/rpc/status.proto rather than embedded messages within successful response codes.
    • Update references to the path message's encoding of the root path.
    • Update encoding of Path to use the PathElem message rather than to use a repeated string.

  • v0.2.2: March 7, 2017

    • Add clarifications of ON_CHANGE subscriptions and the requirement for an initial sync of matching subscription paths.
    • Correct responses to an unsupported encoding error to be Unimplemented (fixes #36).

  • v0.2.1: November 10, 2016

  • Correct reference to TEXT vs. ASCII encoding type.

  • Ensure that the encodings enumeration is numbered consistently.

  • Fix broken links.

Notes

Footnotes

  1. This matches the types that Go UnixNano and Java TimeUnit toNanos return, and hence is used rather than an unsigned integer. ↩