diff --git a/.github/actions/run-tests/config/www/000-default.conf b/.github/actions/run-tests/config/www/000-default.conf new file mode 100644 index 000000000..a39e06794 --- /dev/null +++ b/.github/actions/run-tests/config/www/000-default.conf @@ -0,0 +1,37 @@ + + # The ServerName directive sets the request scheme, hostname and port that + # the server uses to identify itself. This is used when creating + # redirection URLs. In the context of virtual hosts, the ServerName + # specifies what hostname must appear in the request's Host: header to + # match this virtual host. For the default virtual host (this file) this + # value is not decisive as it is used as a last resort host regardless. + # However, you must set it for any further virtual host explicitly. + #ServerName www.example.com + + ServerAdmin webmaster@localhost + DocumentRoot /www + + # Available loglevels: trace8, ..., trace1, debug, info, notice, warn, + # error, crit, alert, emerg. + # It is also possible to configure the loglevel for particular + # modules, e.g. + #LogLevel info ssl:warn + + ErrorLog ${APACHE_LOG_DIR}/error.log + CustomLog ${APACHE_LOG_DIR}/access.log combined + + # For most configuration files from conf-available/, which are + # enabled or disabled at a global level, it is possible to + # include a line for only one particular virtual host. For example the + # following line enables the CGI configuration for this host only + # after it has been globally disabled with "a2disconf". + #Include conf-available/serve-cgi-bin.conf + + + Options Indexes FollowSymLinks + AllowOverride None + Require all granted + + + +# vim: syntax=apache ts=4 sw=4 sts=4 sr noet diff --git a/.github/actions/run-tests/config/www/apache2.conf b/.github/actions/run-tests/config/www/apache2.conf new file mode 100644 index 000000000..b0082d103 --- /dev/null +++ b/.github/actions/run-tests/config/www/apache2.conf @@ -0,0 +1,227 @@ +# This is the main Apache server configuration file. It contains the +# configuration directives that give the server its instructions. +# See http://httpd.apache.org/docs/2.4/ for detailed information about +# the directives and /usr/share/doc/apache2/README.Debian about Debian specific +# hints. +# +# +# Summary of how the Apache 2 configuration works in Debian: +# The Apache 2 web server configuration in Debian is quite different to +# upstream's suggested way to configure the web server. This is because Debian's +# default Apache2 installation attempts to make adding and removing modules, +# virtual hosts, and extra configuration directives as flexible as possible, in +# order to make automating the changes and administering the server as easy as +# possible. + +# It is split into several files forming the configuration hierarchy outlined +# below, all located in the /etc/apache2/ directory: +# +# /etc/apache2/ +# |-- apache2.conf +# | `-- ports.conf +# |-- mods-enabled +# | |-- *.load +# | `-- *.conf +# |-- conf-enabled +# | `-- *.conf +# `-- sites-enabled +# `-- *.conf +# +# +# * apache2.conf is the main configuration file (this file). It puts the pieces +# together by including all remaining configuration files when starting up the +# web server. +# +# * ports.conf is always included from the main configuration file. It is +# supposed to determine listening ports for incoming connections which can be +# customized anytime. +# +# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/ +# directories contain particular configuration snippets which manage modules, +# global configuration fragments, or virtual host configurations, +# respectively. +# +# They are activated by symlinking available configuration files from their +# respective *-available/ counterparts. These should be managed by using our +# helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See +# their respective man pages for detailed information. +# +# * The binary is called apache2. Due to the use of environment variables, in +# the default configuration, apache2 needs to be started/stopped with +# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not +# work with the default configuration. + + +# Global configuration +# + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# NOTE! If you intend to place this on an NFS (or otherwise network) +# mounted filesystem then please read the Mutex documentation (available +# at ); +# you will save yourself a lot of trouble. +# +# Do NOT add a slash at the end of the directory path. +# +#ServerRoot "/etc/apache2" + +# +# The accept serialization lock file MUST BE STORED ON A LOCAL DISK. +# +#Mutex file:${APACHE_LOCK_DIR} default + +# +# The directory where shm and other runtime files will be stored. +# + +DefaultRuntimeDir ${APACHE_RUN_DIR} + +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# This needs to be set in /etc/apache2/envvars +# +PidFile ${APACHE_PID_FILE} + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 300 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive On + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We recommend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 5 + + +# These need to be set in /etc/apache2/envvars +User ${APACHE_RUN_USER} +Group ${APACHE_RUN_GROUP} + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off + +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a +# container, that host's errors will be logged there and not here. +# +ErrorLog ${APACHE_LOG_DIR}/error.log + +# +# LogLevel: Control the severity of messages logged to the error_log. +# Available values: trace8, ..., trace1, debug, info, notice, warn, +# error, crit, alert, emerg. +# It is also possible to configure the log level for particular modules, e.g. +# "LogLevel info ssl:warn" +# +LogLevel warn + +# Include module configuration: +IncludeOptional mods-enabled/*.load +IncludeOptional mods-enabled/*.conf + +# Include list of ports to listen on +Include ports.conf + + +# Sets the default security model of the Apache2 HTTPD server. It does +# not allow access to the root filesystem outside of /usr/share and /var/www. +# The former is used by web applications packaged in Debian, +# the latter may be used for local directories served by the web server. If +# your system is serving content from a sub-directory in /srv you must allow +# access here, or in any related virtual host. + + Options FollowSymLinks + AllowOverride None + Require all denied + + + + AllowOverride None + Require all granted + + + + Options Indexes FollowSymLinks + AllowOverride None + Require all granted + + +# +# Options Indexes FollowSymLinks +# AllowOverride None +# Require all granted +# + + + + +# AccessFileName: The name of the file to look for in each directory +# for additional configuration directives. See also the AllowOverride +# directive. +# +AccessFileName .htaccess + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# + + Require all denied + + + +# +# The following directives define some format nicknames for use with +# a CustomLog directive. +# +# These deviate from the Common Log Format definitions in that they use %O +# (the actual bytes sent including headers) instead of %b (the size of the +# requested file), because the latter makes it impossible to detect partial +# requests. +# +# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended. +# Use mod_remoteip instead. +# +LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined +LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined +LogFormat "%h %l %u %t \"%r\" %>s %O" common +LogFormat "%{Referer}i -> %U" referer +LogFormat "%{User-agent}i" agent + +# Include of directories ignores editors' and dpkg's backup files, +# see README.Debian for details. + +# Include generic snippets of statements +IncludeOptional conf-enabled/*.conf + +# Include the virtual host configurations: +IncludeOptional sites-enabled/*.conf + +# vim: syntax=apache ts=4 sw=4 sts=4 sr noet diff --git a/.github/actions/run-tests/docker-compose.yml b/.github/actions/run-tests/docker-compose.yml index 9082a3f44..5ce9f0e95 100644 --- a/.github/actions/run-tests/docker-compose.yml +++ b/.github/actions/run-tests/docker-compose.yml @@ -100,6 +100,9 @@ services: - ./volumes/cookbook:/nextcloud/custom_apps/cookbook:ro www: - image: nginx:alpine + image: php:apache + # ports: + # - 8888:80 volumes: - - ./volumes/www/:/usr/share/nginx/html:ro + - ./volumes/www/:/www:ro + - ./config/www/000-default.conf:/etc/apache2/sites-available/000-default.conf:ro diff --git a/CHANGELOG.md b/CHANGELOG.md index e6edc3727..32f2fc618 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -17,6 +17,8 @@ [#924](https://github.com/nextcloud/cookbook/pull/924) @MarcelRobitaille - Create abstraction class for access to user configuration [#926](https://github.com/nextcloud/cookbook/pull/926) @christianlupus +- Allow unit test to run against webserver with PHP support + [#927](https://github.com/nextcloud/cookbook/pull/927) @christianlupus ### Documentation - Introduction about how to start coding