[Globals]
ListenAddress=127.0.0.1
ListenPort=3350
EnableUserWindowManager=true
; Give in relative path to user's home directory
UserWindowManager=startwm.sh
; Give in full path or relative path to /etc/xrdp
DefaultWindowManager=startwm.sh
; Give in full path or relative path to /etc/xrdp
ReconnectScript=reconnectwm.sh

[Security]
AllowRootLogin=true
MaxLoginRetry=4
TerminalServerUsers=tsusers
TerminalServerAdmins=tsadmins
; When AlwaysGroupCheck=false access will be permitted
; if the group TerminalServerUsers is not defined.
AlwaysGroupCheck=false
; When RestrictOutboundClipboard=all clipboard from the
; server is not pushed to the client.
; In addition, you can control text/file/image transfer restrictions
; respectively. It also accepts comma separated list such as text,file,image.
; To keep compatibility, some aliases are also available:
;   true: an alias of all
;   false: an alias of none
;   yes: an alias of all
RestrictOutboundClipboard=none
; When RestrictInboundClipboard=all clipboard from the
; client is not pushed to the server.
; In addition, you can control text/file/image transfer restrictions
; respectively. It also accepts comma separated list such as text,file,image.
; To keep compatibility, some aliases are also available:
;   true: an alias of all
;   false: an alias of none
;   yes: an alias of all
RestrictInboundClipboard=none

[Sessions]
;; X11DisplayOffset - x11 display number offset
; Type: integer
; Default: 10
X11DisplayOffset=10

;; MaxSessions - maximum number of connections to an xrdp server
; Type: integer
; Default: 0
MaxSessions=50

;; KillDisconnected - kill disconnected sessions
; Type: boolean
; Default: false
; if 1, true, or yes, every session will be killed within DisconnectedTimeLimit
; seconds after the user disconnects
KillDisconnected=false

;; DisconnectedTimeLimit (seconds) - wait before kill disconnected sessions
; Type: integer
; Default: 0
; if KillDisconnected is set to false, this value is ignored
DisconnectedTimeLimit=0

;; IdleTimeLimit (seconds) - wait before disconnect idle sessions
; Type: integer
; Default: 0
; Set to 0 to disable idle disconnection.
IdleTimeLimit=0

;; Policy - session allocation policy
; Type: enum [ "Default" | "UBD" | "UBI" | "UBC" | "UBDI" | "UBDC" ]
; "Default" session per <User,BitPerPixel>
; "UBD" session per <User,BitPerPixel,DisplaySize>
; "UBI" session per <User,BitPerPixel,IPAddr>
; "UBC" session per <User,BitPerPixel,Connection>
; "UBDI" session per <User,BitPerPixel,DisplaySize,IPAddr>
; "UBDC" session per <User,BitPerPixel,DisplaySize,Connection>
Policy=Default

[Logging]
; Note: Log levels can be any of: core, error, warning, info, debug, or trace
LogFile=xrdp-sesman.log
LogLevel=DEBUG
EnableSyslog=true
SyslogLevel=DEBUG
#EnableConsole=false
#ConsoleLevel=INFO
#EnableProcessId=false

[LoggingPerLogger]
; Note: per logger configuration is only used if xrdp is built with
; --enable-devel-logging
#sesman.c=INFO
#main()=INFO

;
; Session definitions - startup command-line parameters for each session type
;

[Xorg]
; Specify the path of non-suid Xorg executable. It might differ depending
; on your distribution and version. Find out the appropreate path for your
; environment. The typical path is known as follows:
;
; Fedora 26 or later    :  param=/usr/libexec/Xorg
; Debian 9 or later     :  param=/usr/lib/xorg/Xorg
; Ubuntu 16.04 or later :  param=/usr/lib/xorg/Xorg
; Arch Linux            :  param=/usr/lib/Xorg
; CentOS 7              :  param=/usr/bin/Xorg or param=Xorg
; CentOS 8              :  param=/usr/libexec/Xorg
;
param=/usr/lib/Xorg
; Leave the rest paramaters as-is unless you understand what will happen.
param=-config
param=xrdp/xorg.conf
param=-noreset
param=-nolisten
param=tcp
param=-logfile
param=.xorgxrdp.%s.log

[Xvnc]
param=Xvnc
param=-bs
param=-nolisten
param=tcp
param=-localhost
param=-dpi
param=96

[Chansrv]
; drive redirection
; See sesman.ini(5) for the format of this parameter
#FuseMountName=/run/user/%u/thinclient_drives
#FuseMountName=/media/thinclient_drives/%U/thinclient_drives
#FuseMountName=thinclient_drives
FuseMountName=shread_drives
; this value allows only the user to acess their own mapped drives.
; Make this more permissive (e.g. 022) if required.
FileUmask=077
; Can be used to disable FUSE functionality - see sesman.ini(5)
#EnableFuseMount=false
; Uncomment this line only if you are using GNOME 3 versions 3.29.92
; and up, and you wish to cut-paste files between Nautilus and Windows. Do
; not use this setting for GNOME 4, or other file managers
#UseNautilus3FlistFormat=true

[ChansrvLogging]
; Note: one log file is created per display and the LogFile config value
; is ignored. The channel server log file names follow the naming convention:
; xrdp-chansrv.${DISPLAY}.log
;
; Note: Log levels can be any of: core, error, warning, info, debug, or trace
LogLevel=INFO
EnableSyslog=true
#SyslogLevel=INFO
#EnableConsole=false
#ConsoleLevel=INFO
#EnableProcessId=false

[ChansrvLoggingPerLogger]
; Note: per logger configuration is only used if xrdp is built with
; --enable-devel-logging
#chansrv.c=INFO
#main()=INFO

[SessionVariables]
PULSE_SCRIPT=/etc/xrdp/pulse/default.pa