diff --git a/examples/nucleo_g474re/ixm42xxx_fifo/main.cpp b/examples/nucleo_g474re/ixm42xxx_fifo/main.cpp
new file mode 100644
index 0000000000..2f9b46bb8d
--- /dev/null
+++ b/examples/nucleo_g474re/ixm42xxx_fifo/main.cpp
@@ -0,0 +1,148 @@
+// coding: utf-8
+/*
+ * Copyright (c) 2023, Rasmus Kleist Hørlyck Sørensen
+ *
+ * This file is part of the modm project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ */
+// ----------------------------------------------------------------------------
+
+#include <modm/board.hpp>
+#include <modm/driver/inertial/ixm42xxx.hpp>
+#include <modm/platform.hpp>
+#include <modm/processing.hpp>
+
+namespace
+{
+    volatile bool interrupt = false;
+}
+
+using SpiMaster = modm::platform::SpiMaster1;
+using Mosi = GpioA7;
+using Miso = GpioA6;
+using Sck = GpioA5;
+using Cs = GpioC5;
+
+using Int1 = GpioC3;
+
+class ImuThread : public modm::pt::Protothread, public modm::ixm42xxx
+{
+    using Transport = modm::Ixm42xxxTransportSpi< SpiMaster, Cs >;
+
+public:
+    ImuThread() : imu(fifoData), timer(std::chrono::milliseconds(500)) {}
+
+    bool
+    run()
+    {
+        PT_BEGIN();
+
+        Int1::setInput(modm::platform::Gpio::InputType::PullDown);
+        Exti::connect<Int1>(Exti::Trigger::RisingEdge, [](uint8_t)
+        {
+            interrupt = true;
+        });
+
+        /// Initialize the IMU and verify that it is connected
+        PT_CALL(imu.initialize());
+        while (not PT_CALL(imu.ping()))
+        {
+            MODM_LOG_ERROR << "Cannot ping IXM-42xxx" << modm::endl;
+            PT_WAIT_UNTIL(timer.execute());
+        }
+
+        MODM_LOG_INFO << "IXM-42xxx Initialized" << modm::endl;
+        MODM_LOG_INFO << "Fifo Buffer Size: " << fifoData.getFifoBufferSize() << modm::endl;
+
+        /// Configure FIFO
+        PT_CALL(imu.updateRegister(Register::FIFO_CONFIG, FifoMode_t(FifoMode::StopOnFull)));
+        PT_CALL(imu.updateRegister(Register::FIFO_CONFIG1, FifoConfig1::FIFO_HIRES_EN | FifoConfig1::FIFO_TEMP_EN | FifoConfig1::FIFO_GYRO_EN | FifoConfig1::FIFO_ACCEL_EN));
+        PT_CALL(imu.writeFifoWatermark(1024));
+
+        /// Configure interrupt
+        PT_CALL(imu.updateRegister(Register::INT_CONFIG, IntConfig::INT1_MODE | IntConfig::INT1_DRIVE_CIRCUIT | IntConfig::INT1_POLARITY));
+        PT_CALL(imu.updateRegister(Register::INT_CONFIG1, IntConfig1::INT_ASYNC_RESET));
+        PT_CALL(imu.updateRegister(Register::INT_SOURCE0, IntSource0::FIFO_THS_INT1_EN | IntSource0::FIFO_FULL_INT1_EN, IntSource0::UI_DRDY_INT1_EN));
+
+        /// Configure data sensors
+        PT_CALL(imu.updateRegister(Register::GYRO_CONFIG0, GyroFs_t(GyroFs::dps2000) | GyroOdr_t(GyroOdr::kHz1)));
+        PT_CALL(imu.updateRegister(Register::ACCEL_CONFIG0, AccelFs_t(AccelFs::g16) | AccelOdr_t(AccelOdr::kHz1)));
+        PT_CALL(imu.updateRegister(Register::PWR_MGMT0, GyroMode_t(GyroMode::LowNoise) | AccelMode_t(AccelMode::LowNoise)));
+
+        while (true)
+        {
+            if (interrupt)
+            {
+                PT_CALL(imu.readRegister(Register::INT_STATUS, &intStatus.value));
+                interrupt = false;
+            }
+
+            if (intStatus.any(IntStatus::FIFO_FULL_INT | IntStatus::FIFO_THS_INT))
+            {
+                if (PT_CALL(imu.readFifoData()))
+                {
+                    // Count packets in FIFO buffer and print contents of last packet
+                    uint16_t count = 0;
+                    modm::ixm42xxxdata::FifoPacket fifoPacket;
+                    for (const auto &packet : fifoData)
+                    {
+                        fifoPacket = packet;
+                        count++;
+                    }
+
+                    float temp;
+                    modm::Vector3f accel;
+                    modm::Vector3f gyro;
+
+                    fifoPacket.getTemp(&temp);
+                    fifoPacket.getAccel(&accel, fifoData.getAccelScale());
+                    fifoPacket.getGyro(&gyro, fifoData.getGyroScale());
+
+                    MODM_LOG_INFO.printf("Temp: %f\n", temp);
+                    MODM_LOG_INFO.printf("Accel: (%f, %f, %f)\n", accel.x, accel.y, accel.z);
+                    MODM_LOG_INFO.printf("Gyro: (%f, %f, %f)\n", gyro.x, gyro.y, gyro.z);
+                    MODM_LOG_INFO.printf("FIFO packet count: %u\n", count);
+                }
+                intStatus.reset(IntStatus::FIFO_FULL_INT | IntStatus::FIFO_THS_INT);
+            }
+        }
+        PT_END();
+    }
+
+private:
+
+    /// Due to the non-deterministic nature of system operation, driver memory allocation should always be the largest size of 2080 bytes.
+    modm::ixm42xxxdata::FifoData<2080> fifoData;
+    modm::ixm42xxx::IntStatus_t intStatus;
+    modm::Ixm42xxx< Transport > imu;
+
+    modm::PeriodicTimer timer;
+
+} imuThread;
+
+int
+main()
+{
+    Board::initialize();
+
+    Cs::setOutput(modm::Gpio::High);
+    SpiMaster::connect<Mosi::Mosi, Miso::Miso, Sck::Sck>();
+    SpiMaster::initialize<Board::SystemClock, 21.5_MHz>();
+
+    MODM_LOG_INFO       << "==========IXM-42xxx Test==========" << modm::endl;
+    MODM_LOG_DEBUG      << "Debug logging here" << modm::endl;
+    MODM_LOG_INFO       << "Info logging here" << modm::endl;
+    MODM_LOG_WARNING    << "Warning logging here" << modm::endl;
+    MODM_LOG_ERROR      << "Error logging here" << modm::endl;
+    MODM_LOG_INFO       << "==================================" << modm::endl;
+
+    while (true)
+    {
+        imuThread.run();
+    }
+
+    return 0;
+}
diff --git a/examples/nucleo_g474re/ixm42xxx_fifo/project.xml b/examples/nucleo_g474re/ixm42xxx_fifo/project.xml
new file mode 100644
index 0000000000..fcf707cd29
--- /dev/null
+++ b/examples/nucleo_g474re/ixm42xxx_fifo/project.xml
@@ -0,0 +1,16 @@
+<library>
+  <extends>modm:nucleo-g474re</extends>
+  <options>
+    <option name="modm:build:build.path">../../../build/nucleo_g474re/iim42652_fifo</option>
+  </options>
+  <modules>
+    <module>modm:driver:ixm42xxx</module>
+    <module>modm:math:geometry</module>
+    <module>modm:platform:exti</module>
+    <module>modm:platform:gpio</module>
+    <module>modm:platform:spi:1</module>
+    <module>modm:processing:protothread</module>
+    <module>modm:processing:timer</module>
+    <module>modm:build:scons</module>
+  </modules>
+</library>
\ No newline at end of file