Add STM32C0x devices

README.md

@@ -12,7 +12,7 @@ These tools and this data set is maintained and curated by
 [@salkinium][] only at [modm-io/modm-devices][modm-devices].
 It is licensed under the MPLv2 license.
 
-Currently data for <!--devicecount-->4419<!--/devicecount--> devices is available.
+Currently data for <!--devicecount-->4449<!--/devicecount--> devices is available.
 Please open an issue or better yet a pull request for additional support.
 
 <!--devicetable-->
@@ -21,7 +21,7 @@ Please open an issue or better yet a pull request for additional support.
 | AT90          |    12   | ATMEGA        |   352   | ATTINY        |   148   |
 | NRF52         |     7   | RP20          |     1   | SAMD1x/D2x/DAx|   322   |
 | SAMD5x/E5x    |   114   | SAME7x/S7x/V7x|   134   | SAMG5x        |    12   |
-| SAML2x        |    82   | STM32C0       |    19   | STM32F0       |   169   |
+| SAML2x        |    82   | STM32C0       |    49   | STM32F0       |   169   |
 | STM32F1       |   174   | STM32F2       |    71   | STM32F3       |   145   |
 | STM32F4       |   354   | STM32F7       |   181   | STM32G0       |   262   |
 | STM32G4       |   306   | STM32H5       |    70   | STM32H7       |   206   |
@@ -44,10 +44,10 @@ make generate-sam
 make generate-avr
 ```
 
-You need Python3 with lxml, jinja2, deepdiff and CppHeaderParser packages.
+You need Python3 with lxml, jinja2, deepdiff, CppHeaderParser and packaging packages.
 
 ```sh
-pip install lxml jinja2 deepdiff CppHeaderParser
+pip install lxml jinja2 deepdiff CppHeaderParser packaging
 ```
 
 

devices/rp/rp2040.xml

@@ -194,30 +194,6 @@
     <driver name="watchdog" type="rp20"/>
     <driver name="xip" type="rp20"/>
     <driver name="gpio" type="rp20">
-      <gpio port="qspi" pin="0" name="sclk">
-        <signal driver="xip" name="sclk" af="0"/>
-        <signal driver="sio" name="pad" af="5"/>
-      </gpio>
-      <gpio port="qspi" pin="1" name="ss">
-        <signal driver="xip" name="ss_n" af="0"/>
-        <signal driver="sio" name="pad" af="5"/>
-      </gpio>
-      <gpio port="qspi" pin="2" name="sd0">
-        <signal driver="xip" name="sd0" af="0"/>
-        <signal driver="sio" name="pad" af="5"/>
-      </gpio>
-      <gpio port="qspi" pin="3" name="sd1">
-        <signal driver="xip" name="sd1" af="0"/>
-        <signal driver="sio" name="pad" af="5"/>
-      </gpio>
-      <gpio port="qspi" pin="4" name="sd2">
-        <signal driver="xip" name="sd2" af="0"/>
-        <signal driver="sio" name="pad" af="5"/>
-      </gpio>
-      <gpio port="qspi" pin="5" name="sd3">
-        <signal driver="xip" name="sd3" af="0"/>
-        <signal driver="sio" name="pad" af="5"/>
-      </gpio>
       <gpio port="bank0" pin="0" name="0">
         <signal driver="jtag" name="tck" af="0"/>
         <signal driver="spi" name="rx" af="1" instance="0"/>
@@ -305,7 +281,6 @@
         <signal driver="usb" name="muxing_vbus_detect" af="9"/>
       </gpio>
       <gpio port="bank0" pin="8" name="8">
-        <signal driver="adc" name="in0" af="-1"/>
         <signal driver="spi" name="rx" af="1" instance="1"/>
         <signal driver="uart" name="tx" af="2" instance="1"/>
         <signal driver="i2c" name="sda" af="3" instance="0"/>
@@ -317,7 +292,6 @@
         <signal driver="usb" name="muxing_vbus_en" af="9"/>
       </gpio>
       <gpio port="bank0" pin="9" name="9">
-        <signal driver="adc" name="in1" af="-1"/>
         <signal driver="spi" name="ss_n" af="1" instance="1"/>
         <signal driver="uart" name="rx" af="2" instance="1"/>
         <signal driver="i2c" name="scl" af="3" instance="0"/>
@@ -329,7 +303,6 @@
         <signal driver="usb" name="muxing_overcurr_detect" af="9"/>
       </gpio>
       <gpio port="bank0" pin="10" name="10">
-        <signal driver="adc" name="in2" af="-1"/>
         <signal driver="spi" name="sclk" af="1" instance="1"/>
         <signal driver="uart" name="cts" af="2" instance="1"/>
         <signal driver="i2c" name="sda" af="3" instance="1"/>
@@ -341,7 +314,6 @@
         <signal driver="usb" name="muxing_vbus_detect" af="9"/>
       </gpio>
       <gpio port="bank0" pin="11" name="11">
-        <signal driver="adc" name="in3" af="-1"/>
         <signal driver="spi" name="tx" af="1" instance="1"/>
         <signal driver="uart" name="rts" af="2" instance="1"/>
         <signal driver="i2c" name="scl" af="3" instance="1"/>
@@ -504,6 +476,7 @@
         <signal driver="usb" name="muxing_vbus_detect" af="9"/>
       </gpio>
       <gpio port="bank0" pin="26" name="26">
+        <signal driver="adc" name="in0" af="-1"/>
         <signal driver="spi" name="sclk" af="1" instance="1"/>
         <signal driver="uart" name="cts" af="2" instance="1"/>
         <signal driver="i2c" name="sda" af="3" instance="1"/>
@@ -514,6 +487,7 @@
         <signal driver="usb" name="muxing_vbus_en" af="9"/>
       </gpio>
       <gpio port="bank0" pin="27" name="27">
+        <signal driver="adc" name="in1" af="-1"/>
         <signal driver="spi" name="tx" af="1" instance="1"/>
         <signal driver="uart" name="rts" af="2" instance="1"/>
         <signal driver="i2c" name="scl" af="3" instance="1"/>
@@ -524,6 +498,7 @@
         <signal driver="usb" name="muxing_overcurr_detect" af="9"/>
       </gpio>
       <gpio port="bank0" pin="28" name="28">
+        <signal driver="adc" name="in2" af="-1"/>
         <signal driver="spi" name="rx" af="1" instance="1"/>
         <signal driver="uart" name="tx" af="2" instance="0"/>
         <signal driver="i2c" name="sda" af="3" instance="0"/>
@@ -534,6 +509,7 @@
         <signal driver="usb" name="muxing_vbus_detect" af="9"/>
       </gpio>
       <gpio port="bank0" pin="29" name="29">
+        <signal driver="adc" name="in3" af="-1"/>
         <signal driver="spi" name="ss_n" af="1" instance="1"/>
         <signal driver="uart" name="rx" af="2" instance="0"/>
         <signal driver="i2c" name="scl" af="3" instance="0"/>
@@ -543,6 +519,30 @@
         <signal driver="pio" name="pad" af="7" instance="1"/>
         <signal driver="usb" name="muxing_vbus_en" af="9"/>
       </gpio>
+      <gpio port="qspi" pin="0" name="sclk">
+        <signal driver="xip" name="sclk" af="0"/>
+        <signal driver="sio" name="pad" af="5"/>
+      </gpio>
+      <gpio port="qspi" pin="1" name="ss">
+        <signal driver="xip" name="ss_n" af="0"/>
+        <signal driver="sio" name="pad" af="5"/>
+      </gpio>
+      <gpio port="qspi" pin="2" name="sd0">
+        <signal driver="xip" name="sd0" af="0"/>
+        <signal driver="sio" name="pad" af="5"/>
+      </gpio>
+      <gpio port="qspi" pin="3" name="sd1">
+        <signal driver="xip" name="sd1" af="0"/>
+        <signal driver="sio" name="pad" af="5"/>
+      </gpio>
+      <gpio port="qspi" pin="4" name="sd2">
+        <signal driver="xip" name="sd2" af="0"/>
+        <signal driver="sio" name="pad" af="5"/>
+      </gpio>
+      <gpio port="qspi" pin="5" name="sd3">
+        <signal driver="xip" name="sd3" af="0"/>
+        <signal driver="sio" name="pad" af="5"/>
+      </gpio>
     </driver>
   </device>
 </modm>