diff --git a/i18n/vscode-language-pack-cs/translations/main.i18n.json b/i18n/vscode-language-pack-cs/translations/main.i18n.json index 3465bfce14..e13362e4fc 100644 --- a/i18n/vscode-language-pack-cs/translations/main.i18n.json +++ b/i18n/vscode-language-pack-cs/translations/main.i18n.json @@ -2454,20 +2454,21 @@ }, "vs/platform/request/common/request": { "electronFetch": "Určuje, jestli se má místo implementace Node.js povolit implementace načítání Electron. Všechna místní rozšíření získají pro globální rozhraní API pro načítání implementaci načítání Electron.", - "fetchAdditionalSupport": "Určuje, jestli se má implementace načítání Node.js rozšířit o další podporu. Podpora proxy serveru ({0}) a systémových certifikátů ({1}) se v současné době přidají, když jsou povolená odpovídající nastavení.", + "fetchAdditionalSupport": "Controls whether Node.js' fetch implementation should be extended with additional support. Currently proxy support ({1}) and system certificates ({2}) are added when the corresponding settings are enabled. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "httpConfigurationTitle": "HTTP", - "noProxy": "Určuje názvy domén, pro které se mají ignorovat nastavení proxy serveru pro požadavky HTTP/HTTPS.", - "proxy": "Nastavení proxy, které se má použít. Pokud není nastaveno, zdědí se z proměnných prostředí http_proxy a https_proxy.", - "proxyAuthorization": "Hodnota, která se odešle jako hlavička Proxy-Authorization pro všechny síťové požadavky", - "proxyKerberosServicePrincipal": "Přepíše hlavní název služby pro ověřování protokolem Kerberos pomocí proxy HTTP. Pokud není nastaveno, použije se výchozí hodnota založená na názvu hostitele proxy serveru.", - "proxySupport": "Umožňuje pro rozšíření používat podporu proxy serveru.", + "noProxy": "Specifies domain names for which proxy settings should be ignored for HTTP/HTTPS requests. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxy": "The proxy setting to use. If not set, will be inherited from the `http_proxy` and `https_proxy` environment variables. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyAuthorization": "The value to send as the `Proxy-Authorization` header for every network request. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyKerberosServicePrincipal": "Overrides the principal service name for Kerberos authentication with the HTTP proxy. A default based on the proxy hostname is used when this is not set. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxySupport": "Use the proxy support for extensions. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "proxySupportFallback": "Povolte podporu proxy pro rozšíření a návrat k možnostem žádosti, když se žádný proxy nenajde.", "proxySupportOff": "Umožňuje pro rozšíření zakázat podporu proxy serveru.", "proxySupportOn": "Umožňuje pro rozšíření povolit podporu proxy serveru.", "proxySupportOverride": "Umožňuje pro rozšíření povolit podporu proxy serveru. Přepíše možnosti žádosti.", - "strictSSL": "Určuje, jestli se má certifikát proxy serveru ověřovat podle seznamu zadaných certifikačních autorit.", - "systemCertificates": "Určuje, jestli mají být certifikáty certifikační autority načítány z operačního systému. (V systému Windows a macOS se po vypnutí tohoto nastavení vyžaduje opětovné načtení okna.)", - "systemCertificatesV2": "Určuje, jestli se má povolit experimentální načítání certifikátů certifikační autority z operačního systému. Používá se obecnější přístup než výchozí implemence." + "strictSSL": "Controls whether the proxy server certificate should be verified against the list of supplied CAs. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificates": "Controls whether CA certificates should be loaded from the OS. On Windows and macOS, a reload of the window is required after turning this off. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificatesV2": "Controls whether experimental loading of CA certificates from the OS should be enabled. This uses a more general approach than the default implementation. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "useLocalProxy": "Controls whether in the remote extension host the local proxy configuration should be used. This setting only applies as a remote setting during [remote development](https://aka.ms/vscode-remote)." }, "vs/platform/shell/node/shellEnv": { "resolveShellEnvError": "Nepovedlo se vyřešit vaše prostředí: {0}", @@ -5687,6 +5688,7 @@ "chat.commandCenter.enabled": "Určuje, jestli centrum příkazů zobrazuje nabídku akcí pro řízení Copilotu (vyžaduje {0}).", "chat.detectParticipant.enabled": "Povolí automatickou detekci účastníka chatu pro panelový chat.", "chat.editing.alwaysSaveWithGeneratedChanges": "Určuje, jestli se soubory, které mají změny provedené v chatu, dají uložit bez potvrzení.", + "chat.editing.autoAcceptDelay": "Delay after which changes made by chat are automatically accepted. Values are in seconds, `0` means disabled and `100` seconds is the maximum.", "chat.editing.confirmEditRequestRemoval": "Určuje, jestli se má před odebráním žádosti a přidružených úprav zobrazit potvrzení.", "chat.editing.confirmEditRequestRetry": "Určuje, jestli se má před opakováním žádosti a souvisejících úprav zobrazit potvrzení.", "chat.experimental.detectParticipant.enabled": "Povolí automatickou detekci účastníka chatu pro panelový chat.", @@ -5849,12 +5851,15 @@ "diff": "Přepnout rozdílové Editor", "discard": "Zahodit úpravy chatu", "discard2": "Zahodit", + "label": "Navigation Status", "next": "Přejít na další úpravu v chatu", "prev": "Přejít na předchozí úpravu v chatu", + "review": "Review", "undo": "Zahodit tuto změnu" }, "vs/workbench/contrib/chat/browser/chatEditorController": { "chat.ctxHasRequestInProgress": "Aktuální editor zobrazuje soubor z relace úprav, která stále probíhá", + "chat.ctxReviewModeEnabled": "Review mode for chat changes is enabled", "chat.hasEditorModifications": "Aktuální editor obsahuje úpravy z chatu", "diff.agent": "{0} (změny z {1})", "diff.generic": "{0} (změny z chatu)" @@ -5866,7 +5871,6 @@ "vs/workbench/contrib/chat/browser/chatEditorOverlay": { "applyingPercentage": "{0} % se aplikují úpravy...", "generating": "Generují se úpravy…", - "label": "Stav navigace", "nOfM": "{0} z(e) {1}", "tooltip_11": "1 změna v 1 souboru", "tooltip_1n": "1 změna v(e) {0} souborech", @@ -12533,7 +12537,7 @@ "terminal.integrated.fontFamily": "Určuje rodinu písem terminálu. Ve výchozím nastavení se použije hodnota nastavení {0}.", "terminal.integrated.fontLigatures.enabled": "Určuje, jestli jsou v terminálu povolené ligatury písem. Ligatury budou fungovat jenom v případě, že je nakonfigurovaný {0} podporuje.", "terminal.integrated.fontLigatures.fallbackLigatures": "Pokud je povolena {0} a konkrétní {1} nelze analyzovat, jedná se o sadu posloupností znaků, které budou vždy vykreslovány společně. Tato možnost umožňuje použití pevné sady ligatur i v případě, že písmo není podporováno.", - "terminal.integrated.fontLigatures.featureSettings": "Controls what font feature settings are used when ligatures are enabled, in the format of the `font-feature-settings` CSS property. Some examples which may be valid depending on the font:", + "terminal.integrated.fontLigatures.featureSettings": "Určuje, jaká nastavení funkcí písma se použijí, když jsou ve formátu vlastnosti CSS font-feature-settings povolené ligatury. Některé příklady, které mohou být platné v závislosti na písmu:", "terminal.integrated.fontSize": "Určuje velikost písma v pixelech terminálu.", "terminal.integrated.fontWeight": "Tloušťka písma, která se má v terminálu používat pro netučný text. Přijímá klíčová slova normal a bold nebo čísla v rozmezí 1 až 1000.", "terminal.integrated.fontWeightBold": "Tloušťka písma, která se má v terminálu používat pro tučný text. Přijímá klíčová slova normal a bold nebo čísla v rozmezí 1 až 1000.", @@ -12916,7 +12920,7 @@ "workbench.action.terminal.selectNextSuggestion": "Vybrat další návrh", "workbench.action.terminal.selectPrevPageSuggestion": "Vybrat návrh předchozí stránky.", "workbench.action.terminal.selectPrevSuggestion": "Vybrat předchozí návrh.", - "workbench.action.terminal.suggestToggleDetils": "Suggest Toggle Details", + "workbench.action.terminal.suggestToggleDetails": "Suggest Toggle Details", "workbench.action.terminal.suggestToggleExplainMode": "Navrhnout přepnutí režimů vysvětlení" }, "vs/workbench/contrib/terminalContrib/suggest/common/terminalSuggestConfiguration": { diff --git a/i18n/vscode-language-pack-de/translations/main.i18n.json b/i18n/vscode-language-pack-de/translations/main.i18n.json index de76bbb64d..4ff111872f 100644 --- a/i18n/vscode-language-pack-de/translations/main.i18n.json +++ b/i18n/vscode-language-pack-de/translations/main.i18n.json @@ -2454,20 +2454,21 @@ }, "vs/platform/request/common/request": { "electronFetch": "Steuert, ob die Verwendung der Fetch-Implementierung von Electron anstelle der von Node.js aktiviert werden soll. Alle lokalen Erweiterungen erhalten die Fetch-Implementierung von Electron für die globale Fetch-API.", - "fetchAdditionalSupport": "Steuert, ob die Fetchimplementierung Node.js mit zusätzlicher Unterstützung erweitert werden soll. Derzeit werden Proxyunterstützung ({0}) und Systemzertifikate ({1}) hinzugefügt, wenn die entsprechenden Einstellungen aktiviert sind.", + "fetchAdditionalSupport": "Controls whether Node.js' fetch implementation should be extended with additional support. Currently proxy support ({1}) and system certificates ({2}) are added when the corresponding settings are enabled. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "httpConfigurationTitle": "HTTP", - "noProxy": "Gibt Domänennamen an, für die Proxyeinstellungen für HTTP/HTTPS-Anforderungen ignoriert werden sollen.", - "proxy": "Die zu verwendende Proxyeinstellung. Ist diese nicht festgelegt, wird sie von den Umgebungsvariablen \"http_proxy\" und \"https_proxy\" geerbt.", - "proxyAuthorization": "Der Wert, der für jede Netzwerkanforderung als Proxy-Authorization-Header gesendet werden soll.", - "proxyKerberosServicePrincipal": "Überschreibt den Prinzipaldienstnamen für die Kerberos-Authentifizierung mit dem HTTP-Proxy. Ist diese Option nicht festgelegt, wird ein Standardwert verwendet, der auf dem Proxyhostnamen basiert.", - "proxySupport": "Proxyunterstützung für Erweiterungen verwenden.", + "noProxy": "Specifies domain names for which proxy settings should be ignored for HTTP/HTTPS requests. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxy": "The proxy setting to use. If not set, will be inherited from the `http_proxy` and `https_proxy` environment variables. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyAuthorization": "The value to send as the `Proxy-Authorization` header for every network request. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyKerberosServicePrincipal": "Overrides the principal service name for Kerberos authentication with the HTTP proxy. A default based on the proxy hostname is used when this is not set. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxySupport": "Use the proxy support for extensions. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "proxySupportFallback": "Aktivieren sie die Proxyunterstützung für Erweiterungen. Greifen Sie auf die Anforderungsoptionen zurück, wenn kein Proxy gefunden wurde.", "proxySupportOff": "Hiermit wird die Proxyunterstützung für Erweiterungen deaktiviert.", "proxySupportOn": "Hiermit wird die Proxyunterstützung für Erweiterungen aktiviert.", "proxySupportOverride": "Hiermit wird die Proxyunterstützung für Erweiterungen aktiviert, und Anforderungsoptionen werden außer Kraft gesetzt.", - "strictSSL": "Steuert, ob das Proxy-Server-Zertifikat mit der Liste der mitgelieferten CAs überprüft werden soll.", - "systemCertificates": "Steuert, ob Zertifizierungsstellenzertifikate über das Betriebssystem geladen werden. (Unter Windows und macOS muss nach dem Deaktivieren dieser Option das Fenster neu geladen werden.)", - "systemCertificatesV2": "Steuert, ob das experimentelle Laden von Zertifizierungsstellenzertifikaten vom Betriebssystem aktiviert werden soll. Dabei wird ein allgemeinerer Ansatz als die Standardimplementierung verwendet." + "strictSSL": "Controls whether the proxy server certificate should be verified against the list of supplied CAs. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificates": "Controls whether CA certificates should be loaded from the OS. On Windows and macOS, a reload of the window is required after turning this off. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificatesV2": "Controls whether experimental loading of CA certificates from the OS should be enabled. This uses a more general approach than the default implementation. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "useLocalProxy": "Controls whether in the remote extension host the local proxy configuration should be used. This setting only applies as a remote setting during [remote development](https://aka.ms/vscode-remote)." }, "vs/platform/shell/node/shellEnv": { "resolveShellEnvError": "Ihre Shellumgebung {0} kann nicht aufgelöst werden", @@ -5687,6 +5688,7 @@ "chat.commandCenter.enabled": "Steuert, ob im Befehlscenter ein Menü für Aktionen angezeigt wird zur Kontrolle von Copilot (erfordert {0}).", "chat.detectParticipant.enabled": "Aktiviert die automatische Erkennung von Chatteilnehmern für Panelchat.", "chat.editing.alwaysSaveWithGeneratedChanges": "Gibt an, ob Dateien mit Änderungen, die über Chat vorgenommen wurden, ohne Bestätigung gespeichert werden können.", + "chat.editing.autoAcceptDelay": "Delay after which changes made by chat are automatically accepted. Values are in seconds, `0` means disabled and `100` seconds is the maximum.", "chat.editing.confirmEditRequestRemoval": "Gibt an, ob vor dem Entfernen einer Anforderung und der zugehörigen Bearbeitungen eine Bestätigung angezeigt werden soll.", "chat.editing.confirmEditRequestRetry": "Gibt an, ob vor dem Wiederholen einer Anforderung und der zugehörigen Bearbeitungen eine Bestätigung angezeigt werden soll.", "chat.experimental.detectParticipant.enabled": "Aktiviert die automatische Erkennung von Chatteilnehmern für Panelchat.", @@ -5849,12 +5851,15 @@ "diff": "Vergleichs-Editor umschalten", "discard": "Chat bearbeiten verwerfen", "discard2": "Verwerfen", + "label": "Navigation Status", "next": "Zur nächsten Chatbearbeitung wechseln", "prev": "Zur vorherigen Chatbearbeitung wechseln", + "review": "Review", "undo": "Diese Änderung verwerfen" }, "vs/workbench/contrib/chat/browser/chatEditorController": { "chat.ctxHasRequestInProgress": "Der aktuelle Editor zeigt eine Datei aus einer Bearbeitungssitzung an, die noch in Bearbeitung ist.", + "chat.ctxReviewModeEnabled": "Review mode for chat changes is enabled", "chat.hasEditorModifications": "Der aktuelle Editor enthält Chatänderungen.", "diff.agent": "{0} (Änderungen von {1})", "diff.generic": "{0} (Änderungen aus dem Chat)" @@ -5866,7 +5871,6 @@ "vs/workbench/contrib/chat/browser/chatEditorOverlay": { "applyingPercentage": "{0} % Bearbeitungen werden angewendet...", "generating": "Bearbeitungen werden generiert …", - "label": "Navigationsstatus", "nOfM": "{0} von {1}", "tooltip_11": "1 Änderung in 1 Datei", "tooltip_1n": "1 Änderung in {0} Dateien", @@ -12533,7 +12537,7 @@ "terminal.integrated.fontFamily": "Steuert die Schriftfamilie des Terminals. Standardmäßig wird der Wert {0} verwendet.", "terminal.integrated.fontLigatures.enabled": "Steuert, ob Schriftligaturen im Terminal aktiviert sind. Ligaturen funktionieren nur, wenn die konfigurierte {0} Ligatur sie unterstützt.", "terminal.integrated.fontLigatures.fallbackLigatures": "Wenn {0} aktiviert ist und die jeweilige {1} nicht analysiert werden kann, ist dies der Satz von Zeichensequenzen, die immer zusammen gezeichnet werden. Dies ermöglicht die Verwendung eines festen Satz von Ligaturen, auch wenn die Schriftart nicht unterstützt wird.", - "terminal.integrated.fontLigatures.featureSettings": "Controls what font feature settings are used when ligatures are enabled, in the format of the `font-feature-settings` CSS property. Some examples which may be valid depending on the font:", + "terminal.integrated.fontLigatures.featureSettings": "Steuert, welche Schriftartfeatureeinstellungen verwendet werden, wenn Ligaturen im Format der CSS-Eigenschaft „font-feature-settings“ aktiviert werden. Einige Beispiele, die je nach Schriftart gültig sein können:", "terminal.integrated.fontSize": "Steuert den Schriftgrad in Pixeln für das Terminal.", "terminal.integrated.fontWeight": "Dies ist die Schriftbreite, die im Terminal für nicht fett formatierten Text verwendet werden soll. Akzeptiert werden die Schlüsselwörter \"normal\" und \"bold\" oder Zahlen zwischen 1 und 1000.", "terminal.integrated.fontWeightBold": "Dies ist die Schriftbreite, die im Terminal für fett formatierten Text verwendet werden soll. Akzeptiert werden die Schlüsselwörter \"normal\" und \"bold\" oder Zahlen zwischen 1 und 1000.", @@ -12916,7 +12920,7 @@ "workbench.action.terminal.selectNextSuggestion": "Nächsten Vorschlag auswählen", "workbench.action.terminal.selectPrevPageSuggestion": "Vorschlag für die vorherige Seite auswählen", "workbench.action.terminal.selectPrevSuggestion": "Vorherigen Vorschlag auswählen", - "workbench.action.terminal.suggestToggleDetils": "Suggest Toggle Details", + "workbench.action.terminal.suggestToggleDetails": "Suggest Toggle Details", "workbench.action.terminal.suggestToggleExplainMode": "Erläuterungsmodi umschalten" }, "vs/workbench/contrib/terminalContrib/suggest/common/terminalSuggestConfiguration": { diff --git a/i18n/vscode-language-pack-es/translations/main.i18n.json b/i18n/vscode-language-pack-es/translations/main.i18n.json index d376cc723d..7a9f558e21 100644 --- a/i18n/vscode-language-pack-es/translations/main.i18n.json +++ b/i18n/vscode-language-pack-es/translations/main.i18n.json @@ -2454,20 +2454,21 @@ }, "vs/platform/request/common/request": { "electronFetch": "Controla si se debe habilitar el uso de la implementación de captura de Electron en lugar de Node.js\". Todas las extensiones locales obtendrán la implementación de captura de Electron para la API de captura global.", - "fetchAdditionalSupport": "Controla si la implementación de captura de Node.js se debe extender con compatibilidad adicional. Actualmente, la compatibilidad con proxy ({0}) y los certificados del sistema ({1}) se agregan cuando se habilita la configuración correspondiente.", + "fetchAdditionalSupport": "Controls whether Node.js' fetch implementation should be extended with additional support. Currently proxy support ({1}) and system certificates ({2}) are added when the corresponding settings are enabled. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "httpConfigurationTitle": "HTTP", - "noProxy": "Especifica los nombres de dominio para los que se debe omitir la configuración de proxy para las solicitudes HTTP/HTTPS.", - "proxy": "La configuración de proxy que se usará. Si no se establece, se heredará de las variables de entorno \"http_proxy\" y \"https_proxy\".", - "proxyAuthorization": "El valor para enviar como el encabezado \"Autenticación de proxy\" para cada solicitud de red.", - "proxyKerberosServicePrincipal": "Invalida el nombre del servicio principal para la autenticación Kerberos con el proxy HTTP. Cuando no se establece, se usa un valor predeterminado basado en el nombre de host del proxy.", - "proxySupport": "Utilice el soporte de proxy para extensiones.", + "noProxy": "Specifies domain names for which proxy settings should be ignored for HTTP/HTTPS requests. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxy": "The proxy setting to use. If not set, will be inherited from the `http_proxy` and `https_proxy` environment variables. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyAuthorization": "The value to send as the `Proxy-Authorization` header for every network request. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyKerberosServicePrincipal": "Overrides the principal service name for Kerberos authentication with the HTTP proxy. A default based on the proxy hostname is used when this is not set. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxySupport": "Use the proxy support for extensions. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "proxySupportFallback": "Habilitar compatibilidad con proxy para extensiones, revertir a opciones de solicitud cuando no se encuentre ningún proxy.", "proxySupportOff": "Deshabilite la compatibilidad de proxy para las extensiones.", "proxySupportOn": "Habilite la compatibilidad de proxy para extensiones.", "proxySupportOverride": "Habilite la compatibilidad de proxy para las extensiones, invalide las opciones de solicitud.", - "strictSSL": "Controla si el certificado del servidor proxy debe comprobarse en la lista de entidades de certificación proporcionada.", - "systemCertificates": "Controla si los certificados de entidad de certificación deben cargarse desde el SO. (En Windows y macOS, se requiere una recarga de la ventana después de desactivar esta opción).", - "systemCertificatesV2": "Controla si se debe habilitar la carga experimental de certificados de CA desde el sistema operativo. Usa un enfoque más general que la implementación predeterminada." + "strictSSL": "Controls whether the proxy server certificate should be verified against the list of supplied CAs. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificates": "Controls whether CA certificates should be loaded from the OS. On Windows and macOS, a reload of the window is required after turning this off. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificatesV2": "Controls whether experimental loading of CA certificates from the OS should be enabled. This uses a more general approach than the default implementation. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "useLocalProxy": "Controls whether in the remote extension host the local proxy configuration should be used. This setting only applies as a remote setting during [remote development](https://aka.ms/vscode-remote)." }, "vs/platform/shell/node/shellEnv": { "resolveShellEnvError": "No se puede resolver el entorno de shell: {0}", @@ -5687,6 +5688,7 @@ "chat.commandCenter.enabled": "Controla si el centro de comandos muestra un menú para las acciones para controlar Copilot (requiere {0}).", "chat.detectParticipant.enabled": "Habilita la detección automática del participante del chat para el chat del panel.", "chat.editing.alwaysSaveWithGeneratedChanges": "Si los archivos que tienen cambios realizados por el chat se pueden guardar sin confirmación.", + "chat.editing.autoAcceptDelay": "Delay after which changes made by chat are automatically accepted. Values are in seconds, `0` means disabled and `100` seconds is the maximum.", "chat.editing.confirmEditRequestRemoval": "Indica si se debe mostrar una confirmación antes de quitar una solicitud y sus ediciones asociadas.", "chat.editing.confirmEditRequestRetry": "Indica si se debe mostrar una confirmación antes de reintentar una solicitud y sus ediciones asociadas.", "chat.experimental.detectParticipant.enabled": "Habilita la detección automática del participante del chat para el chat del panel.", @@ -5849,12 +5851,15 @@ "diff": "Alternar Editor de diferencias", "discard": "Descartar edición de chat", "discard2": "Descartar", + "label": "Navigation Status", "next": "Ir a Siguiente edición de chat", "prev": "Ir a Edición de chat anterior", + "review": "Review", "undo": "Descartar este cambio" }, "vs/workbench/contrib/chat/browser/chatEditorController": { "chat.ctxHasRequestInProgress": "El editor actual muestra un archivo de una sesión de edición que aún está en curso", + "chat.ctxReviewModeEnabled": "Review mode for chat changes is enabled", "chat.hasEditorModifications": "El editor actual contiene modificaciones de chat", "diff.agent": "{0} (cambios de {1})", "diff.generic": "{0} (cambios del chat)" @@ -5866,7 +5871,6 @@ "vs/workbench/contrib/chat/browser/chatEditorOverlay": { "applyingPercentage": "{0}% aplicando ediciones...", "generating": "Generando ediciones...", - "label": "Estado de navegación", "nOfM": "{0} de {1}", "tooltip_11": "1 cambio en 1 archivo", "tooltip_1n": "1 cambio en {0} archivos", @@ -12533,7 +12537,7 @@ "terminal.integrated.fontFamily": "Controla la familia de fuentes del terminal. De forma predeterminada, el valor es {0}.", "terminal.integrated.fontLigatures.enabled": "Controla si las ligaduras de fuentes están habilitadas en el terminal. Las ligaduras solo funcionarán si el {0} configurado las admite.", "terminal.integrated.fontLigatures.fallbackLigatures": "Cuando {0} está habilitado y no se puede analizar el {1} concreto, este es el conjunto de secuencias de caracteres que siempre se dibujarán juntas. Esto permite el uso de un conjunto fijo de ligaduras incluso cuando no se admite la fuente.", - "terminal.integrated.fontLigatures.featureSettings": "Controls what font feature settings are used when ligatures are enabled, in the format of the `font-feature-settings` CSS property. Some examples which may be valid depending on the font:", + "terminal.integrated.fontLigatures.featureSettings": "Controla la configuración de las características de la fuente que se usan cuando las ligaduras están activadas, en el formato de la propiedad CSS `font-feature-settings`. Algunos ejemplos que pueden ser válidos según la fuente:", "terminal.integrated.fontSize": "Controla el tamaño de la fuente en píxeles del terminal.", "terminal.integrated.fontWeight": "Grosor de fuente que se va a usar en el terminal para texto que no esté en negrita. Acepta las palabras clave \"normal\" y \"bold\" o números entre 1 y 1000.", "terminal.integrated.fontWeightBold": "Grosor de fuente que se va a usar en el terminal para texto en negrita. Acepta las palabras clave \"normal\" y \"bold\" o números entre 1 y 1000.", @@ -12916,7 +12920,7 @@ "workbench.action.terminal.selectNextSuggestion": "Seleccionar la sugerencia siguiente", "workbench.action.terminal.selectPrevPageSuggestion": "Seleccionar la sugerencia de página anterior", "workbench.action.terminal.selectPrevSuggestion": "Seleccionar la sugerencia anterior", - "workbench.action.terminal.suggestToggleDetils": "Suggest Toggle Details", + "workbench.action.terminal.suggestToggleDetails": "Suggest Toggle Details", "workbench.action.terminal.suggestToggleExplainMode": "Sugerir alternar modos de explicación" }, "vs/workbench/contrib/terminalContrib/suggest/common/terminalSuggestConfiguration": { diff --git a/i18n/vscode-language-pack-fr/translations/main.i18n.json b/i18n/vscode-language-pack-fr/translations/main.i18n.json index 381f261e67..1b6a448ff9 100644 --- a/i18n/vscode-language-pack-fr/translations/main.i18n.json +++ b/i18n/vscode-language-pack-fr/translations/main.i18n.json @@ -2454,20 +2454,21 @@ }, "vs/platform/request/common/request": { "electronFetch": "Contrôle si l'utilisation de l'implémentation fetch d'Electron au lieu de celle de Node.js doit être activée. Toutes les extensions locales obtiendront l'implémentation d'Electron pour l'API de recherche globale.", - "fetchAdditionalSupport": "Contrôle si l'implémentation de récupération de Node.js doit être étendue avec un support supplémentaire. Actuellement, la prise en charge du proxy ({0}) et les certificats système ({1}) sont ajoutés lorsque les paramètres correspondants sont activés.", + "fetchAdditionalSupport": "Controls whether Node.js' fetch implementation should be extended with additional support. Currently proxy support ({1}) and system certificates ({2}) are added when the corresponding settings are enabled. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "httpConfigurationTitle": "HTTP", - "noProxy": "Spécifie les noms de domaine pour lesquels les paramètres de proxy doivent être ignorés pour les requêtes HTTP/HTTPS.", - "proxy": "Paramètre proxy à utiliser. S'il n'est pas défini, il est hérité des variables d'environnement 'http_proxy' et 'https_proxy'.", - "proxyAuthorization": "Valeur à envoyer comme en-tête 'Proxy-Authorization' pour chaque demande de réseau.", - "proxyKerberosServicePrincipal": "Remplace le nom du service principal pour l’authentification Kerberos par le proxy HTTP. Une valeur par défaut basée sur le nom d’hôte du proxy est utilisée si ce paramètre n’est pas défini.", - "proxySupport": "Utilisez la prise en charge du proxy pour les extensions.", + "noProxy": "Specifies domain names for which proxy settings should be ignored for HTTP/HTTPS requests. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxy": "The proxy setting to use. If not set, will be inherited from the `http_proxy` and `https_proxy` environment variables. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyAuthorization": "The value to send as the `Proxy-Authorization` header for every network request. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyKerberosServicePrincipal": "Overrides the principal service name for Kerberos authentication with the HTTP proxy. A default based on the proxy hostname is used when this is not set. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxySupport": "Use the proxy support for extensions. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "proxySupportFallback": "Activer la prise en charge du proxy pour les extensions, revenir aux options de demande quand aucun proxy n’a été trouvé.", "proxySupportOff": "Désactivez la prise en charge de proxy pour les extensions.", "proxySupportOn": "Activez la prise en charge de proxy pour les extensions.", "proxySupportOverride": "Activer le support de proxy pour les extensions, remplacer les options de demande.", - "strictSSL": "Spécifie si le certificat de serveur proxy doit être vérifié par rapport à la liste des autorités de certification fournies.", - "systemCertificates": "Contrôle si les certificats d'autorité de certification doivent être chargés à partir de l'OS. (Sur Windows et macOS, vous devez recharger la fenêtre après la désactivation de ce paramètre.)", - "systemCertificatesV2": "Contrôle si le chargement expérimental des certificats d’autorité de certification à partir du système d’exploitation doit être activé. Ceci utilise une approche plus générale que l’implémenation par défaut." + "strictSSL": "Controls whether the proxy server certificate should be verified against the list of supplied CAs. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificates": "Controls whether CA certificates should be loaded from the OS. On Windows and macOS, a reload of the window is required after turning this off. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificatesV2": "Controls whether experimental loading of CA certificates from the OS should be enabled. This uses a more general approach than the default implementation. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "useLocalProxy": "Controls whether in the remote extension host the local proxy configuration should be used. This setting only applies as a remote setting during [remote development](https://aka.ms/vscode-remote)." }, "vs/platform/shell/node/shellEnv": { "resolveShellEnvError": "Impossible de résoudre votre environnement d’interpréteur de commandes : {0}", @@ -5687,6 +5688,7 @@ "chat.commandCenter.enabled": "Contrôle si le centre de commande affiche un menu d'actions pour contrôler Copilot (nécessite {0}).", "chat.detectParticipant.enabled": "Active la détection automatique des participants à la conversation pour la conversation de panneau.", "chat.editing.alwaysSaveWithGeneratedChanges": "Indique si les fichiers qui ont été modifiés par la conversation peuvent être enregistrés sans confirmation.", + "chat.editing.autoAcceptDelay": "Delay after which changes made by chat are automatically accepted. Values are in seconds, `0` means disabled and `100` seconds is the maximum.", "chat.editing.confirmEditRequestRemoval": "Indique s’il faut afficher une confirmation avant de supprimer une requête et ses modifications associées.", "chat.editing.confirmEditRequestRetry": "Indique s’il faut afficher une confirmation avant de réessayer une requête et ses modifications associées.", "chat.experimental.detectParticipant.enabled": "Active la détection automatique des participants à la conversation pour la conversation de panneau.", @@ -5849,12 +5851,15 @@ "diff": "Activer/désactiver la Rédacteur diff", "discard": "Annulez la modification de la conversation instantanée", "discard2": "Abandonnez", + "label": "Navigation Status", "next": "Accéder à la modification de conversation suivante", "prev": "Accéder à la modification de conversation précédente", + "review": "Review", "undo": "Ignorer cette modification" }, "vs/workbench/contrib/chat/browser/chatEditorController": { "chat.ctxHasRequestInProgress": "Le Rédacteur actuel affiche un fichier d’une session d’édition qui est toujours en cours", + "chat.ctxReviewModeEnabled": "Review mode for chat changes is enabled", "chat.hasEditorModifications": "L’éditeur actuel contient des modifications de conversation", "diff.agent": "{0} (modifications de {1})", "diff.generic": "{0} (modifications de la conversation)" @@ -5866,7 +5871,6 @@ "vs/workbench/contrib/chat/browser/chatEditorOverlay": { "applyingPercentage": "{0} % d’application des modifications...", "generating": "Génération de modifications...", - "label": "État de la navigation", "nOfM": "{0} sur {1}", "tooltip_11": "1 modification dans 1 fichier", "tooltip_1n": "1 modification dans {0} fichiers", @@ -12533,7 +12537,7 @@ "terminal.integrated.fontFamily": "Contrôle la famille de polices du terminal. La valeur par défaut est la valeur de {0}.", "terminal.integrated.fontLigatures.enabled": "Contrôle si les ligatures de police sont activées dans le terminal. Les ligatures ne fonctionnent que si le {0} configuré les prend en charge.", "terminal.integrated.fontLigatures.fallbackLigatures": "Lorsque {0} est activé et que le {1} particulier ne peut pas être analysé, il s’agit de l’ensemble de séquences de caractères qui sont toujours dessinées ensemble. Cela permet l’utilisation d’un ensemble fixe de ligatures, même si la police n’est pas prise en charge.", - "terminal.integrated.fontLigatures.featureSettings": "Controls what font feature settings are used when ligatures are enabled, in the format of the `font-feature-settings` CSS property. Some examples which may be valid depending on the font:", + "terminal.integrated.fontLigatures.featureSettings": "Contrôle les paramètres de fonctionnalité de police utilisés lorsque les ligatures sont activées, au format de la propriété CSS `font-feature-settings`. Voici quelques exemples qui peuvent être valides en fonction de la police :", "terminal.integrated.fontSize": "Contrôle la taille de police en pixels du terminal.", "terminal.integrated.fontWeight": "Épaisseur de police à utiliser dans le terminal pour le texte qui n'est pas en gras. Accepte les mots clés \"normal\" et \"bold\", ou les nombres compris entre 1 et 1 000.", "terminal.integrated.fontWeightBold": "Épaisseur de police à utiliser dans le terminal pour le texte qui est en gras. Accepte les mots clés \"normal\" et \"bold\", ou les nombres compris entre 1 et 1 000.", @@ -12916,7 +12920,7 @@ "workbench.action.terminal.selectNextSuggestion": "Sélectionner la suggestion suivante", "workbench.action.terminal.selectPrevPageSuggestion": "Sélectionner la suggestion de la page précédente", "workbench.action.terminal.selectPrevSuggestion": "Sélectionner la suggestion précédente", - "workbench.action.terminal.suggestToggleDetils": "Suggest Toggle Details", + "workbench.action.terminal.suggestToggleDetails": "Suggest Toggle Details", "workbench.action.terminal.suggestToggleExplainMode": "Suggérer des modes d’explication" }, "vs/workbench/contrib/terminalContrib/suggest/common/terminalSuggestConfiguration": { diff --git a/i18n/vscode-language-pack-it/translations/main.i18n.json b/i18n/vscode-language-pack-it/translations/main.i18n.json index d06235569f..7dc6f1c1fa 100644 --- a/i18n/vscode-language-pack-it/translations/main.i18n.json +++ b/i18n/vscode-language-pack-it/translations/main.i18n.json @@ -2454,20 +2454,21 @@ }, "vs/platform/request/common/request": { "electronFetch": "Controlla se deve essere abilitato l'uso dell'implementazione del recupero di Electron invece di Node.js. Tutte le estensioni locali otterranno l'implementazione del recupero di Electron per l'API di recupero globale.", - "fetchAdditionalSupport": "Controlla se è necessario estendere l'implementazione del recupero di Node.js con supporto aggiuntivo. Attualmente il supporto proxy ({0}) e i certificati di sistema ({1}) vengono aggiunti quando sono abilitate le impostazioni corrispondenti.", + "fetchAdditionalSupport": "Controls whether Node.js' fetch implementation should be extended with additional support. Currently proxy support ({1}) and system certificates ({2}) are added when the corresponding settings are enabled. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "httpConfigurationTitle": "HTTP", - "noProxy": "Specifica i nomi di dominio di cui ignorare le impostazioni proxy per le richieste HTTP/HTTPS.", - "proxy": "Impostazione proxy da usare. Se non è impostata, verrà ereditata dalle variabili di ambiente `http_proxy` e `https_proxy`.", - "proxyAuthorization": "Valore da inviare come intestazione `Proxy-Authorization` per ogni richiesta di rete.", - "proxyKerberosServicePrincipal": "Esegue l'override del nome del servizio principale per l'autenticazione Kerberos con il proxy HTTP. Quando non è impostato, viene usato un valore predefinito basato sul nome host proxy.", - "proxySupport": "Usa il supporto proxy per le estensioni.", + "noProxy": "Specifies domain names for which proxy settings should be ignored for HTTP/HTTPS requests. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxy": "The proxy setting to use. If not set, will be inherited from the `http_proxy` and `https_proxy` environment variables. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyAuthorization": "The value to send as the `Proxy-Authorization` header for every network request. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyKerberosServicePrincipal": "Overrides the principal service name for Kerberos authentication with the HTTP proxy. A default based on the proxy hostname is used when this is not set. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxySupport": "Use the proxy support for extensions. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "proxySupportFallback": "Abilita il supporto del proxy per le estensioni ed esegue il fallback alle opzioni della richiesta quando non è stato trovato alcun proxy.", "proxySupportOff": "Disabilita il supporto proxy per le estensioni.", "proxySupportOn": "Abilita il supporto proxy per le estensioni.", "proxySupportOverride": "Abilita il supporto proxy per le estensioni ed esegue l'override delle opzioni di richiesta.", - "strictSSL": "Controlla se il certificato del server proxy deve essere verificato in base all'elenco di CA specificate.", - "systemCertificates": "Controlla se i certificati della CA devono essere caricati dal sistema operativo. Dopo la disattivazione in Windows e macOS è richiesto un riavvio della finestra.", - "systemCertificatesV2": "Controlla se è necessario abilitare il caricamento sperimentale dei certificati CA dal sistema operativo. Usa un approccio più generale rispetto all'implementazione predefinita." + "strictSSL": "Controls whether the proxy server certificate should be verified against the list of supplied CAs. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificates": "Controls whether CA certificates should be loaded from the OS. On Windows and macOS, a reload of the window is required after turning this off. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificatesV2": "Controls whether experimental loading of CA certificates from the OS should be enabled. This uses a more general approach than the default implementation. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "useLocalProxy": "Controls whether in the remote extension host the local proxy configuration should be used. This setting only applies as a remote setting during [remote development](https://aka.ms/vscode-remote)." }, "vs/platform/shell/node/shellEnv": { "resolveShellEnvError": "Non è possibile risolvere l'ambiente della shell: {0}", @@ -5687,6 +5688,7 @@ "chat.commandCenter.enabled": "Controllare se il centro comandi mostra un menu per le azioni per controllare Copilot (richiede {0}).", "chat.detectParticipant.enabled": "Abilita il rilevamento automatico dei partecipanti alla chat per la chat del pannello.", "chat.editing.alwaysSaveWithGeneratedChanges": "Indica se i file con modifiche apportate dalla chat possono essere salvati senza conferma.", + "chat.editing.autoAcceptDelay": "Delay after which changes made by chat are automatically accepted. Values are in seconds, `0` means disabled and `100` seconds is the maximum.", "chat.editing.confirmEditRequestRemoval": "Indica se visualizzare una conferma prima di rimuovere una richiesta e le modifiche associate.", "chat.editing.confirmEditRequestRetry": "Indica se visualizzare una conferma prima di riprovare una richiesta e le modifiche associate.", "chat.experimental.detectParticipant.enabled": "Abilita il rilevamento automatico dei partecipanti alla chat per la chat del pannello.", @@ -5849,12 +5851,15 @@ "diff": "Attiva/Disattiva Editor differenze", "discard": "Rimuovi modifica della chat", "discard2": "Rimuovi", + "label": "Navigation Status", "next": "Passare a Modifica chat successiva", "prev": "Passare alla modifica della chat precedente", + "review": "Review", "undo": "Ignora questa modifica" }, "vs/workbench/contrib/chat/browser/chatEditorController": { "chat.ctxHasRequestInProgress": "L'editor corrente mostra un file da una sessione di modifica ancora in corso", + "chat.ctxReviewModeEnabled": "Review mode for chat changes is enabled", "chat.hasEditorModifications": "L'editor corrente contiene modifiche della chat", "diff.agent": "{0} (modifiche da {1})", "diff.generic": "{0} (modifiche dalla chat)" @@ -5866,7 +5871,6 @@ "vs/workbench/contrib/chat/browser/chatEditorOverlay": { "applyingPercentage": "{0}% applicazione delle modifiche...", "generating": "Generazione delle modifiche in corso...", - "label": "Stato di spostamento", "nOfM": "{0} di {1}", "tooltip_11": "1 modifica in 1 file", "tooltip_1n": "1 modifica in {0} file", @@ -12533,7 +12537,7 @@ "terminal.integrated.fontFamily": "Controlla la famiglia di caratteri del terminale. Imposta il valore di {0} come predefinito.", "terminal.integrated.fontLigatures.enabled": "Controlla se i caratteri legatura sono abilitati nel terminale. Le legature funzioneranno solo se supportate dal {0} configurato.", "terminal.integrated.fontLigatures.fallbackLigatures": "Quando {0} è abilitato e non è possibile analizzare la {1} specifica, si tratta del set di sequenze di caratteri che verranno sempre tracciate insieme. Consente l'uso di un set fisso di legature anche quando il tipo di carattere non è supportato.", - "terminal.integrated.fontLigatures.featureSettings": "Controls what font feature settings are used when ligatures are enabled, in the format of the `font-feature-settings` CSS property. Some examples which may be valid depending on the font:", + "terminal.integrated.fontLigatures.featureSettings": "Gestisce quali impostazioni delle funzionalità del tipo di carattere vengono impiegate quando le legature sono abilitate, nel formato della proprietà CSS `font-feature-settings`. Alcuni esempi che possono essere validi a seconda del tipo di carattere:", "terminal.integrated.fontSize": "Controlla le dimensioni del carattere in pixel del terminale.", "terminal.integrated.fontWeight": "Spessore del carattere da usare nel terminale per il testo non in grassetto. Accetta le parole chiave \"normal\" e \"bold\" o i numeri compresi tra 1 e 1000.", "terminal.integrated.fontWeightBold": "Spessore del carattere da usare nel terminale per il testo in grassetto. Accetta le parole chiave \"normal\" e \"bold\" o i numeri compresi tra 1 e 1000.", @@ -12916,7 +12920,7 @@ "workbench.action.terminal.selectNextSuggestion": "Seleziona il suggerimento successivo", "workbench.action.terminal.selectPrevPageSuggestion": "Seleziona il suggerimento per pagina precedente", "workbench.action.terminal.selectPrevSuggestion": "Seleziona il suggerimento precedente", - "workbench.action.terminal.suggestToggleDetils": "Suggest Toggle Details", + "workbench.action.terminal.suggestToggleDetails": "Suggest Toggle Details", "workbench.action.terminal.suggestToggleExplainMode": "Suggerisci/Nascondi modalità esplicativa" }, "vs/workbench/contrib/terminalContrib/suggest/common/terminalSuggestConfiguration": { diff --git a/i18n/vscode-language-pack-ja/translations/main.i18n.json b/i18n/vscode-language-pack-ja/translations/main.i18n.json index 174e6b6952..b5c3f85e46 100644 --- a/i18n/vscode-language-pack-ja/translations/main.i18n.json +++ b/i18n/vscode-language-pack-ja/translations/main.i18n.json @@ -2454,20 +2454,21 @@ }, "vs/platform/request/common/request": { "electronFetch": "Node.js' ではなく、Electron のフェッチ実装の使用を有効にするかどうかを制御します。すべてのローカル拡張機能は、グローバル フェッチ API に対する Electron のフェッチ実装を取得します。", - "fetchAdditionalSupport": "Node.js のフェッチ実装を追加のサポートで拡張するかどうかを制御します。現在、プロキシ サポート ({0}) とシステム証明書 ({1}) は、対応する設定が有効になっている場合に追加されます。", + "fetchAdditionalSupport": "Controls whether Node.js' fetch implementation should be extended with additional support. Currently proxy support ({1}) and system certificates ({2}) are added when the corresponding settings are enabled. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "httpConfigurationTitle": "HTTP", - "noProxy": "HTTP/HTTPS 要求でプロキシ設定を無視する必要があるドメイン名を指定します。", - "proxy": "使用するプロキシ設定。設定されていない場合は、'http_proxy' および 'https_proxy' の環境変数から継承されます。", - "proxyAuthorization": "すべてのネットワーク要求に対して 'Proxy-Authorization' ヘッダーとして送信する値。", - "proxyKerberosServicePrincipal": "HTTP プロキシを使用して Kerberos 認証のプリンシパル サービス名をオーバーライドします。プロキシ ホスト名に基づく既定値は、設定されていない場合に使用されます。", - "proxySupport": "拡張機能プロキシ サポートを使用します。", + "noProxy": "Specifies domain names for which proxy settings should be ignored for HTTP/HTTPS requests. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxy": "The proxy setting to use. If not set, will be inherited from the `http_proxy` and `https_proxy` environment variables. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyAuthorization": "The value to send as the `Proxy-Authorization` header for every network request. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyKerberosServicePrincipal": "Overrides the principal service name for Kerberos authentication with the HTTP proxy. A default based on the proxy hostname is used when this is not set. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxySupport": "Use the proxy support for extensions. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "proxySupportFallback": "プロキシが見つからないときに、拡張機能のプロキシ サポートを有効にし、要求オプションにフォールバックします。", "proxySupportOff": "拡張機能のプロキシ サポートを無効にします。", "proxySupportOn": "拡張機能のプロキシ サポートを有効にします。", "proxySupportOverride": "拡張機能のプロキシ サポートを有効にします。リクエスト オプションを上書きします。", - "strictSSL": "提供された CA の一覧と照らしてプロキシ サーバーの証明書を確認するかどうか制御します。", - "systemCertificates": "CA 証明書を OS から読み込む必要があるかどうかを制御します (Windows および macOS では、オフにした場合にウィンドウの再読み込みが必要です)。", - "systemCertificatesV2": "OS からの CA 証明書の試験的な読み込みを有効にするかどうかを制御します。これは、既定の補完よりも一般的なアプローチを使用します。" + "strictSSL": "Controls whether the proxy server certificate should be verified against the list of supplied CAs. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificates": "Controls whether CA certificates should be loaded from the OS. On Windows and macOS, a reload of the window is required after turning this off. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificatesV2": "Controls whether experimental loading of CA certificates from the OS should be enabled. This uses a more general approach than the default implementation. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "useLocalProxy": "Controls whether in the remote extension host the local proxy configuration should be used. This setting only applies as a remote setting during [remote development](https://aka.ms/vscode-remote)." }, "vs/platform/shell/node/shellEnv": { "resolveShellEnvError": "シェル環境を解決できません: {0}", @@ -5687,6 +5688,7 @@ "chat.commandCenter.enabled": "コマンド センターが Copilot を制御するための操作のメニューを表示するかどうかを制御します ({0} が必要です)。", "chat.detectParticipant.enabled": "パネル チャットのチャット参加者の自動検出を有効にします。", "chat.editing.alwaysSaveWithGeneratedChanges": "チャットで変更されたファイルを確認なしに保存できるかどうか。", + "chat.editing.autoAcceptDelay": "Delay after which changes made by chat are automatically accepted. Values are in seconds, `0` means disabled and `100` seconds is the maximum.", "chat.editing.confirmEditRequestRemoval": "要求とそれに関連付けられた編集を削除する前に確認を表示するかどうか。", "chat.editing.confirmEditRequestRetry": "要求とそれに関連付けられた編集を再試行する前に確認を表示するかどうか。", "chat.experimental.detectParticipant.enabled": "パネル チャットのチャット参加者の自動検出を有効にします。", @@ -5849,12 +5851,15 @@ "diff": "差分エディターの切り替え", "discard": "チャット編集を破棄", "discard2": "破棄", + "label": "Navigation Status", "next": "次のチャット編集に移動", "prev": "前のチャット編集に移動", + "review": "Review", "undo": "この変更を破棄する" }, "vs/workbench/contrib/chat/browser/chatEditorController": { "chat.ctxHasRequestInProgress": "現在のエディターには、まだ進行中の編集セッションのファイルが表示されています", + "chat.ctxReviewModeEnabled": "Review mode for chat changes is enabled", "chat.hasEditorModifications": "現在のエディターにはチャットでの変更が含まれています", "diff.agent": "{0} ({1} からの変更)", "diff.generic": "{0} (チャットからの変更)" @@ -5866,7 +5871,6 @@ "vs/workbench/contrib/chat/browser/chatEditorOverlay": { "applyingPercentage": "{0}% 編集を適用しています...", "generating": "編集を生成しています...", - "label": "ナビゲーションの状態", "nOfM": "{1} の {0}", "tooltip_11": "1 個のファイル内の 1 件の変更", "tooltip_1n": "{0} 個のファイル内の 1 件の変更", @@ -12533,7 +12537,7 @@ "terminal.integrated.fontFamily": "ターミナルのフォント ファミリを制御し、既定値は {0} となります。", "terminal.integrated.fontLigatures.enabled": "ターミナルでフォント合字を有効にするかどうかを制御します。合字は、構成された {0} でサポートされている場合にのみ機能します。", "terminal.integrated.fontLigatures.fallbackLigatures": "{0} が有効で、特定の {1} を解析できない場合、これは常に一緒に描画される一連の文字シーケンスです。これにより、フォントがサポートされていない場合でも、固定の合字セットを使用できます。", - "terminal.integrated.fontLigatures.featureSettings": "Controls what font feature settings are used when ligatures are enabled, in the format of the `font-feature-settings` CSS property. Some examples which may be valid depending on the font:", + "terminal.integrated.fontLigatures.featureSettings": "合字が有効な場合に使用されるフォント機能の設定を、`font-feature-settings` CSS プロパティの形式で制御します。フォントに応じて有効な例をいくつか示します。", "terminal.integrated.fontSize": "ターミナルのフォント サイズをピクセル単位で制御します。", "terminal.integrated.fontWeight": "端末内で太字以外のテキストに使用するフォントの太さ。\"normal\" と \"bold\" のキーワード、または 1 から 1000 の間の数字を受け入れます。", "terminal.integrated.fontWeightBold": "端末内で太字のテキストに使用するフォントの太さ。\"normal\" と \"bold\" のキーワード、または 1 から 1000 の間の数字を受け入れます。", @@ -12916,7 +12920,7 @@ "workbench.action.terminal.selectNextSuggestion": "[次の提案] を選択する", "workbench.action.terminal.selectPrevPageSuggestion": "前のページの候補を選択する", "workbench.action.terminal.selectPrevSuggestion": "前の候補を選択する", - "workbench.action.terminal.suggestToggleDetils": "Suggest Toggle Details", + "workbench.action.terminal.suggestToggleDetails": "Suggest Toggle Details", "workbench.action.terminal.suggestToggleExplainMode": "候補の説明モードの切り替え" }, "vs/workbench/contrib/terminalContrib/suggest/common/terminalSuggestConfiguration": { diff --git a/i18n/vscode-language-pack-ko/translations/main.i18n.json b/i18n/vscode-language-pack-ko/translations/main.i18n.json index 4267183f2e..55115f4d7a 100644 --- a/i18n/vscode-language-pack-ko/translations/main.i18n.json +++ b/i18n/vscode-language-pack-ko/translations/main.i18n.json @@ -2454,20 +2454,21 @@ }, "vs/platform/request/common/request": { "electronFetch": "Node.js의 페치 구현 대신 Electron의 페치 구현을 사용할지 여부를 제어합니다. 모든 로컬 확장은 전역 페치 API에 대한 Electron의 페치 구현을 가져옵니다.", - "fetchAdditionalSupport": "추가 지원을 통해 Node.js 페치 구현을 확장해야 하는지 여부를 제어합니다. 현재 프록시 지원({0}) 및 시스템 인증서({1})는 해당 설정을 사용하도록 설정하면 추가됩니다.", + "fetchAdditionalSupport": "Controls whether Node.js' fetch implementation should be extended with additional support. Currently proxy support ({1}) and system certificates ({2}) are added when the corresponding settings are enabled. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "httpConfigurationTitle": "HTTP", - "noProxy": "HTTP/HTTPS 요청에 대해 프록시 설정을 무시해야 하는 도메인 이름을 지정합니다.", - "proxy": "사용할 프록시 설정입니다. 설정하지 않으면 'http_proxy' 및 'https_proxy' 환경 변수에서 상속됩니다.", - "proxyAuthorization": "모든 네트워크 요청의 'Proxy-Authorization' 헤더로 보낼 값입니다.", - "proxyKerberosServicePrincipal": "Kerberos 인증에 대한 주 서비스 이름을 HTTP 프록시로 재정의합니다. 설정되지 않은 경우, 프록시 호스트 이름을 기반으로 기본값이 사용됩니다.", - "proxySupport": "확장에 대해 프록시 지원을 사용합니다.", + "noProxy": "Specifies domain names for which proxy settings should be ignored for HTTP/HTTPS requests. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxy": "The proxy setting to use. If not set, will be inherited from the `http_proxy` and `https_proxy` environment variables. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyAuthorization": "The value to send as the `Proxy-Authorization` header for every network request. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyKerberosServicePrincipal": "Overrides the principal service name for Kerberos authentication with the HTTP proxy. A default based on the proxy hostname is used when this is not set. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxySupport": "Use the proxy support for extensions. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "proxySupportFallback": "프록시를 찾을 수 없는 경우 확장에 대한 프록시 지원을 사용하도록 설정하고 요청 옵션으로 대체합니다.", "proxySupportOff": "확장에 대한 프록시 지원을 사용하지 않도록 설정합니다.", "proxySupportOn": "확장에 대한 프록시 지원을 사용하도록 설정합니다.", "proxySupportOverride": "확장에 대한 프록시 지원을 사용하지 않도록 설정하고 요청 옵션을 재정의합니다.", - "strictSSL": "제공된 CA 목록에 대해 프록시 서버 인증서를 확인해야 하는지 여부를 제어합니다.", - "systemCertificates": "OS에서 CA 인증서를 로드해야 하는지 여부를 제어합니다(Windows 및 macOS에서는 이 기능을 끈 후 창을 다시 로드해야 함).", - "systemCertificatesV2": "OS에서 CA 인증서의 실험적 로드를 사용할지 여부를 제어합니다. 기본 구현보다 더 일반적인 방법을 사용합니다." + "strictSSL": "Controls whether the proxy server certificate should be verified against the list of supplied CAs. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificates": "Controls whether CA certificates should be loaded from the OS. On Windows and macOS, a reload of the window is required after turning this off. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificatesV2": "Controls whether experimental loading of CA certificates from the OS should be enabled. This uses a more general approach than the default implementation. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "useLocalProxy": "Controls whether in the remote extension host the local proxy configuration should be used. This setting only applies as a remote setting during [remote development](https://aka.ms/vscode-remote)." }, "vs/platform/shell/node/shellEnv": { "resolveShellEnvError": "셸 환경 {0}을(를) 확인할 수 없습니다.", @@ -5687,6 +5688,7 @@ "chat.commandCenter.enabled": "명령 센터에 Copilot를 제어하기 위한 작업 메뉴를 표시할지 여부를 제어합니다({0} 필요).", "chat.detectParticipant.enabled": "패널 채팅에서 채팅 참가자 자동 감지를 사용합니다.", "chat.editing.alwaysSaveWithGeneratedChanges": "채팅에서 변경한 파일을 확인 없이 저장할 수 있는지 여부입니다.", + "chat.editing.autoAcceptDelay": "Delay after which changes made by chat are automatically accepted. Values are in seconds, `0` means disabled and `100` seconds is the maximum.", "chat.editing.confirmEditRequestRemoval": "요청 및 관련 편집을 제거하기 전에 확인을 표시할지 여부입니다.", "chat.editing.confirmEditRequestRetry": "요청 및 관련 편집을 다시 시도하기 전에 확인을 표시할지 여부입니다.", "chat.experimental.detectParticipant.enabled": "패널 채팅에서 채팅 참가자 자동 감지를 사용합니다.", @@ -5849,12 +5851,15 @@ "diff": "Diff 편집기 설정/해제", "discard": "채팅 편집 취소", "discard2": "취소", + "label": "Navigation Status", "next": "다음 채팅 편집으로 이동", "prev": "이전 채팅 편집으로 이동", + "review": "Review", "undo": "이 변경 내용 취소" }, "vs/workbench/contrib/chat/browser/chatEditorController": { "chat.ctxHasRequestInProgress": "현재 편집기에는 아직 진행 중인 편집 세션의 파일이 표시됩니다.", + "chat.ctxReviewModeEnabled": "Review mode for chat changes is enabled", "chat.hasEditorModifications": "현재 편집기에 채팅 수정 내용이 포함되어 있습니다.", "diff.agent": "{0}({1} 변경 내용)", "diff.generic": "{0}(채팅의 변경 내용)" @@ -5866,7 +5871,6 @@ "vs/workbench/contrib/chat/browser/chatEditorOverlay": { "applyingPercentage": "{0}% 편집 적용 중...", "generating": "편집을 생성하는 중...", - "label": "탐색 상태", "nOfM": "{0}/{1}개", "tooltip_11": "1개 파일에 변경 내용 1개", "tooltip_1n": "{0}개 파일 변경 내용 1개", @@ -12533,7 +12537,7 @@ "terminal.integrated.fontFamily": "터미널의 글꼴 패밀리를 제어합니다. 기본값은 {0} 값입니다.", "terminal.integrated.fontLigatures.enabled": "터미널에서 글꼴 합자를 사용할지 여부를 제어합니다. 합자는 구성된 {0} 구성에서 지원하는 경우에만 작동합니다.", "terminal.integrated.fontLigatures.fallbackLigatures": "{0} 사용하도록 설정되어 있고 특정 {1} 구문 분석할 수 없는 경우 항상 함께 그려지는 문자 시퀀스 집합입니다. 글꼴이 지원되지 않는 경우에도 고정된 합자 집합을 사용할 수 있습니다.", - "terminal.integrated.fontLigatures.featureSettings": "Controls what font feature settings are used when ligatures are enabled, in the format of the `font-feature-settings` CSS property. Some examples which may be valid depending on the font:", + "terminal.integrated.fontLigatures.featureSettings": "합자가 활성화될 때 사용되는 글꼴 기능 설정을 'font-feature-settings' CSS 속성 형식으로 제어합니다. 글꼴에 따라 유효한 몇 가지 예는 다음과 같습니다.", "terminal.integrated.fontSize": "터미널의 글꼴 크기(픽셀)를 제어합니다.", "terminal.integrated.fontWeight": "터미널 내에서 보통 텍스트에 사용할 글꼴 두께입니다. \"일반\" 및 \"굵게\" 키워드 또는 1에서 1,000 사이의 숫자를 허용합니다.", "terminal.integrated.fontWeightBold": "터미널 내에서 굵은 텍스트에 사용할 글꼴 두께입니다. \"일반\" 및 \"굵게\" 키워드 또는 1에서 1,000 사이의 숫자를 허용합니다.", @@ -12916,7 +12920,7 @@ "workbench.action.terminal.selectNextSuggestion": "다음 제안 선택", "workbench.action.terminal.selectPrevPageSuggestion": "이전 페이지 제안 선택", "workbench.action.terminal.selectPrevSuggestion": "이전 제안 선택", - "workbench.action.terminal.suggestToggleDetils": "Suggest Toggle Details", + "workbench.action.terminal.suggestToggleDetails": "Suggest Toggle Details", "workbench.action.terminal.suggestToggleExplainMode": "설명 모드 제안 토글" }, "vs/workbench/contrib/terminalContrib/suggest/common/terminalSuggestConfiguration": { diff --git a/i18n/vscode-language-pack-pl/translations/main.i18n.json b/i18n/vscode-language-pack-pl/translations/main.i18n.json index 80b52a1e07..05ef8a1931 100644 --- a/i18n/vscode-language-pack-pl/translations/main.i18n.json +++ b/i18n/vscode-language-pack-pl/translations/main.i18n.json @@ -2454,20 +2454,21 @@ }, "vs/platform/request/common/request": { "electronFetch": "Określa, czy należy włączyć użycie implementacji pobierania firmy Electron zamiast Node.js”. Wszystkie rozszerzenia lokalne otrzymają implementację pobierania firmy Electron dla globalnego interfejsu API pobierania.", - "fetchAdditionalSupport": "Określa, czy implementacja pobierania Node.js powinna zostać rozszerzona z dodatkową obsługą. Obecnie obsługa serwera proxy ({0}) i certyfikaty systemowe ({1}) są dodawane po włączeniu odpowiednich ustawień.", + "fetchAdditionalSupport": "Controls whether Node.js' fetch implementation should be extended with additional support. Currently proxy support ({1}) and system certificates ({2}) are added when the corresponding settings are enabled. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "httpConfigurationTitle": "HTTP", - "noProxy": "Określa nazwy domen, dla których ustawienia serwera proxy powinny być ignorowane dla żądań protokołu HTTP/HTTPS.", - "proxy": "Ustawienie serwera proxy do użycia. Jeśli nie jest ustawione, zostanie odziedziczone ze zmiennych środowiskowych „http_proxy” i „https_proxy”.", - "proxyAuthorization": "Wartość, która ma zostać wysłana jako nagłówek „Proxy-Authorization” dla każdego żądania sieciowego.", - "proxyKerberosServicePrincipal": "Przesłania główną nazwę usługi uwierzytelniania Kerberos za pomocą serwera proxy HTTP. Gdy ta opcja nie jest ustawiona, używana jest wartość domyślna oparta na nazwie hosta serwera proxy.", - "proxySupport": "Użyj obsługi serwera proxy dla rozszerzeń.", + "noProxy": "Specifies domain names for which proxy settings should be ignored for HTTP/HTTPS requests. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxy": "The proxy setting to use. If not set, will be inherited from the `http_proxy` and `https_proxy` environment variables. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyAuthorization": "The value to send as the `Proxy-Authorization` header for every network request. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyKerberosServicePrincipal": "Overrides the principal service name for Kerberos authentication with the HTTP proxy. A default based on the proxy hostname is used when this is not set. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxySupport": "Use the proxy support for extensions. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "proxySupportFallback": "Włącz obsługę serwera proxy dla rozszerzeń, powróć do opcji żądania, gdy nie znaleziono serwera proxy.", "proxySupportOff": "Wyłącz obsługę serwera proxy dla rozszerzeń.", "proxySupportOn": "Włącz obsługę serwera proxy dla rozszerzeń.", "proxySupportOverride": "Włącz obsługę serwera proxy dla rozszerzeń, przesłoń opcje żądania.", - "strictSSL": "Określa, czy certyfikat serwera proxy ma być weryfikowany względem listy dostarczonych urzędów certyfikacji.", - "systemCertificates": "Kontroluje, czy certyfikaty urzędu certyfikacji powinny być ładowane z systemu operacyjnego. (W systemach Windows i macOS po wyłączeniu tego ustawienia jest wymagane ponowne załadowanie okna).", - "systemCertificatesV2": "Określa, czy ma być włączone eksperymentalne ładowanie certyfikatów urzędu certyfikacji z systemu operacyjnego. Używa to bardziej ogólnego podejścia niż domyślna implementacja." + "strictSSL": "Controls whether the proxy server certificate should be verified against the list of supplied CAs. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificates": "Controls whether CA certificates should be loaded from the OS. On Windows and macOS, a reload of the window is required after turning this off. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificatesV2": "Controls whether experimental loading of CA certificates from the OS should be enabled. This uses a more general approach than the default implementation. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "useLocalProxy": "Controls whether in the remote extension host the local proxy configuration should be used. This setting only applies as a remote setting during [remote development](https://aka.ms/vscode-remote)." }, "vs/platform/shell/node/shellEnv": { "resolveShellEnvError": "Nie można rozpoznać środowiska powłoki: {0}", @@ -5687,6 +5688,7 @@ "chat.commandCenter.enabled": "Określa, czy centrum poleceń wyświetla menu dla akcji w celu kontrolowania funkcji Copilot (wymaga {0}).", "chat.detectParticipant.enabled": "Włącza automatyczne wykrywanie uczestnika czatu na potrzeby czatu panelowego.", "chat.editing.alwaysSaveWithGeneratedChanges": "Określa, czy pliki ze zmianami wprowadzonymi przez czat można zapisywać bez potwierdzenia.", + "chat.editing.autoAcceptDelay": "Delay after which changes made by chat are automatically accepted. Values are in seconds, `0` means disabled and `100` seconds is the maximum.", "chat.editing.confirmEditRequestRemoval": "Określa, czy wyświetlić potwierdzenie przed usunięciem żądania i skojarzonych z nim zmian.", "chat.editing.confirmEditRequestRetry": "Określa, czy wyświetlić potwierdzenie przed ponowieniem próby żądania i skojarzonymi z nim zmianami.", "chat.experimental.detectParticipant.enabled": "Włącza automatyczne wykrywanie uczestnika czatu na potrzeby czatu panelowego.", @@ -5849,12 +5851,15 @@ "diff": "Przełącz Redaktor różnicowe", "discard": "Odrzuć edycję czatu", "discard2": "Odrzuć", + "label": "Navigation Status", "next": "Przejdź do następnej edycji czatu", "prev": "Przejdź do obszaru Poprzednia edycja czatu", + "review": "Review", "undo": "Odrzuć tę zmianę" }, "vs/workbench/contrib/chat/browser/chatEditorController": { "chat.ctxHasRequestInProgress": "Bieżący edytor pokazuje plik z sesji edycji, która jest nadal w toku", + "chat.ctxReviewModeEnabled": "Review mode for chat changes is enabled", "chat.hasEditorModifications": "Bieżący edytor zawiera modyfikacje czatu", "diff.agent": "{0} (zmiany z {1})", "diff.generic": "{0} (zmiany w czacie)" @@ -5866,7 +5871,6 @@ "vs/workbench/contrib/chat/browser/chatEditorOverlay": { "applyingPercentage": "{0}% stosowanie edycji...", "generating": "Trwa generowanie zmian...", - "label": "Stan nawigacji", "nOfM": "{0} z {1}", "tooltip_11": "1 zmiana w 1 pliku", "tooltip_1n": "1 zmiana w {0} plikach", @@ -12533,7 +12537,7 @@ "terminal.integrated.fontFamily": "Określa rodzinę czcionek terminalu. Jest ona ustawiana domyślnie na wartość parametru {0}.", "terminal.integrated.fontLigatures.enabled": "Określa, czy ligatury czcionek są włączone w terminalu. Ligatury będą działać tylko wtedy, gdy skonfigurowany element {0} je obsługuje.", "terminal.integrated.fontLigatures.fallbackLigatures": "Gdy {0} jest włączone i nie można przeanalizować określonego {1}, jest to zestaw sekwencji znaków, które będą zawsze rysowane razem. Umożliwia to korzystanie ze stałego zestawu ligatur nawet wtedy, gdy czcionka nie jest obsługiwana.", - "terminal.integrated.fontLigatures.featureSettings": "Controls what font feature settings are used when ligatures are enabled, in the format of the `font-feature-settings` CSS property. Some examples which may be valid depending on the font:", + "terminal.integrated.fontLigatures.featureSettings": "Określa, jakie ustawienia funkcji czcionek są używane, gdy ligatury są włączone w formacie właściwości CSS „font-feature-settings”. Niektóre przykłady, które mogą być prawidłowe w zależności od czcionki:", "terminal.integrated.fontSize": "Określa rozmiar czcionki terminalu w pikselach.", "terminal.integrated.fontWeight": "Grubość czcionki, która ma być używana w terminalu w przypadku niepogrubionego tekstu. Akceptuje słowa kluczowe „normal” i „bold” lub liczby z zakresu od 1 do 1000.", "terminal.integrated.fontWeightBold": "Grubość czcionki, która ma być używana w terminalu w przypadku pogrubionego tekstu. Akceptuje słowa kluczowe „normal” i „bold” lub liczby z zakresu od 1 do 1000.", @@ -12916,7 +12920,7 @@ "workbench.action.terminal.selectNextSuggestion": "Wybierz następną sugestię", "workbench.action.terminal.selectPrevPageSuggestion": "Wybierz sugestię na następnej stronie", "workbench.action.terminal.selectPrevSuggestion": "Wybierz poprzednią sugestię", - "workbench.action.terminal.suggestToggleDetils": "Suggest Toggle Details", + "workbench.action.terminal.suggestToggleDetails": "Suggest Toggle Details", "workbench.action.terminal.suggestToggleExplainMode": "Zasugeruj przełącz tryby wyjaśnień" }, "vs/workbench/contrib/terminalContrib/suggest/common/terminalSuggestConfiguration": { diff --git a/i18n/vscode-language-pack-pt-BR/translations/main.i18n.json b/i18n/vscode-language-pack-pt-BR/translations/main.i18n.json index ad34e0fb3d..b0419ea509 100644 --- a/i18n/vscode-language-pack-pt-BR/translations/main.i18n.json +++ b/i18n/vscode-language-pack-pt-BR/translations/main.i18n.json @@ -2454,20 +2454,21 @@ }, "vs/platform/request/common/request": { "electronFetch": "Controla se o uso da implementação de busca do Electron em vez do Node.js deve ser habilitado. Todas as extensões locais obterão a implementação de busca do Electron para a API de busca global.", - "fetchAdditionalSupport": "Controla se a implementação de busca do Node.js deve ser estendida com suporte adicional. Atualmente, o suporte a proxy ({0}) e os certificados do sistema ({1}) são adicionados quando as configurações correspondentes estão habilitadas.", + "fetchAdditionalSupport": "Controls whether Node.js' fetch implementation should be extended with additional support. Currently proxy support ({1}) and system certificates ({2}) are added when the corresponding settings are enabled. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "httpConfigurationTitle": "HTTP", - "noProxy": "Especifica nomes de domínio para os quais as configurações de proxy devem ser ignoradas para solicitações HTTP/HTTPS.", - "proxy": "A configuração de proxy a ser usada. Se não estiver definida, será herdada das variáveis de ambiente `http_proxy` e `https_proxy`.", - "proxyAuthorization": "O valor a ser enviado como o cabeçalho `Proxy-Authorization` para cada solicitação de rede.", - "proxyKerberosServicePrincipal": "Substitui o nome do serviço de entidade de segurança para autenticação Kerberos pelo proxy HTTP. Um padrão baseado no nome do host do proxy é usado quando não está definido.", - "proxySupport": "Usar o suporte a proxy para extensões.", + "noProxy": "Specifies domain names for which proxy settings should be ignored for HTTP/HTTPS requests. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxy": "The proxy setting to use. If not set, will be inherited from the `http_proxy` and `https_proxy` environment variables. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyAuthorization": "The value to send as the `Proxy-Authorization` header for every network request. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyKerberosServicePrincipal": "Overrides the principal service name for Kerberos authentication with the HTTP proxy. A default based on the proxy hostname is used when this is not set. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxySupport": "Use the proxy support for extensions. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "proxySupportFallback": "Habilita o suporte ao proxy para extensões, retorna para as opções de solicitação quando nenhum proxy for encontrado.", "proxySupportOff": "Desabilitar o suporte a proxy para extensões.", "proxySupportOn": "Habilitar o suporte a proxy para extensões.", "proxySupportOverride": "Habilitar o suporte a proxy para extensões, substituir opções de solicitação.", - "strictSSL": "Controla se o certificado do servidor proxy deve ser verificado na lista de ACs fornecidas.", - "systemCertificates": "Controla se os certificados de AC devem ser carregados do SO. (No Windows e no macOS, é necessário recarregar a janela depois de desativar esta opção.)", - "systemCertificatesV2": "Controla se o carregamento experimental de certificados de autoridade de certificação do sistema operacional deve ser habilitado. Isso usa uma abordagem mais geral do que a implementação padrão." + "strictSSL": "Controls whether the proxy server certificate should be verified against the list of supplied CAs. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificates": "Controls whether CA certificates should be loaded from the OS. On Windows and macOS, a reload of the window is required after turning this off. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificatesV2": "Controls whether experimental loading of CA certificates from the OS should be enabled. This uses a more general approach than the default implementation. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "useLocalProxy": "Controls whether in the remote extension host the local proxy configuration should be used. This setting only applies as a remote setting during [remote development](https://aka.ms/vscode-remote)." }, "vs/platform/shell/node/shellEnv": { "resolveShellEnvError": "Não é possível resolver o ambiente do shell: {0}", @@ -5687,6 +5688,7 @@ "chat.commandCenter.enabled": "Controla se o centro de comandos mostra um menu para ações para controlar o Copilot (requer {0}).", "chat.detectParticipant.enabled": "Habilita a detecção automática do participante do chat para o chat do painel.", "chat.editing.alwaysSaveWithGeneratedChanges": "Se os arquivos que têm alterações feitas pelo chat podem ser salvos sem confirmação.", + "chat.editing.autoAcceptDelay": "Delay after which changes made by chat are automatically accepted. Values are in seconds, `0` means disabled and `100` seconds is the maximum.", "chat.editing.confirmEditRequestRemoval": "Se deseja mostrar uma confirmação antes de remover uma solicitação e suas edições associadas.", "chat.editing.confirmEditRequestRetry": "Se deseja mostrar uma confirmação antes de repetir uma solicitação e suas edições associadas.", "chat.experimental.detectParticipant.enabled": "Habilita a detecção automática do participante do chat para o chat do painel.", @@ -5849,12 +5851,15 @@ "diff": "Alternar Comparação Editor", "discard": "Descartar Edição de Chat", "discard2": "Descartar", + "label": "Navigation Status", "next": "Ir para Próxima Edição de Chat", "prev": "Ir para Edição de Chat Anterior", + "review": "Review", "undo": "Descartar esta Alteração" }, "vs/workbench/contrib/chat/browser/chatEditorController": { "chat.ctxHasRequestInProgress": "O editor atual mostra um arquivo de uma sessão de edição que ainda está em andamento", + "chat.ctxReviewModeEnabled": "Review mode for chat changes is enabled", "chat.hasEditorModifications": "O editor atual contém modificações de chat", "diff.agent": "{0} (alterações de {1})", "diff.generic": "{0} (alterações do chat)" @@ -5866,7 +5871,6 @@ "vs/workbench/contrib/chat/browser/chatEditorOverlay": { "applyingPercentage": "{0}% aplicando edições...", "generating": "Gerando edições...", - "label": "Estado de Navegação", "nOfM": "{0} de {1}", "tooltip_11": "1 alteração em 1 arquivo", "tooltip_1n": "1 alteração em {0} arquivos", @@ -12533,7 +12537,7 @@ "terminal.integrated.fontFamily": "Controla a família de fontes do terminal. O padrão é o valor de {0}.", "terminal.integrated.fontLigatures.enabled": "Controla se as ligaduras de fonte estão habilitadas no terminal. As ligaduras só funcionarão se o {0} configurado der suporte a elas.", "terminal.integrated.fontLigatures.fallbackLigatures": "Quando {0} está habilitada e o {1} específico não pode ser analisado, este é o conjunto de sequências de caracteres que sempre serão desenhadas juntas. Isso permite o uso de um conjunto fixo de ligaturas, mesmo quando não há suporte para a fonte.", - "terminal.integrated.fontLigatures.featureSettings": "Controls what font feature settings are used when ligatures are enabled, in the format of the `font-feature-settings` CSS property. Some examples which may be valid depending on the font:", + "terminal.integrated.fontLigatures.featureSettings": "Controla quais configurações de recurso de fonte são usadas quando ligaturas são habilitadas, no formato da propriedade CSS \"font-feature-settings\". Alguns exemplos que podem ser válidos dependendo da fonte:", "terminal.integrated.fontSize": "Controla o tamanho da fonte em pixels do terminal.", "terminal.integrated.fontWeight": "A espessura da fonte a ser usada no terminal para texto sem negrito. Aceita palavras-chave \"normal\" e \"negrito\" ou números entre 1 e 1000.", "terminal.integrated.fontWeightBold": "A espessura da fonte a ser usada no terminal para texto em negrito. Aceita palavras-chave \"normal\" e \"negrito\" ou números entre 1 e 1000.", @@ -12916,7 +12920,7 @@ "workbench.action.terminal.selectNextSuggestion": "Selecione a Próxima Sugestão", "workbench.action.terminal.selectPrevPageSuggestion": "Selecionar a Sugestão da Página Anterior", "workbench.action.terminal.selectPrevSuggestion": "Selecione a Sugestão Anterior", - "workbench.action.terminal.suggestToggleDetils": "Suggest Toggle Details", + "workbench.action.terminal.suggestToggleDetails": "Suggest Toggle Details", "workbench.action.terminal.suggestToggleExplainMode": "Sugerir Alternar Modos De Explicação" }, "vs/workbench/contrib/terminalContrib/suggest/common/terminalSuggestConfiguration": { diff --git a/i18n/vscode-language-pack-qps-ploc/translations/main.i18n.json b/i18n/vscode-language-pack-qps-ploc/translations/main.i18n.json index e7abc54464..a7e9118d79 100644 --- a/i18n/vscode-language-pack-qps-ploc/translations/main.i18n.json +++ b/i18n/vscode-language-pack-qps-ploc/translations/main.i18n.json @@ -2454,20 +2454,21 @@ }, "vs/platform/request/common/request": { "electronFetch": "Çøñtrøls whëthër µsë øf Ëlëçtrøñ's fëtçh ïmplëmëñtætïøñ ïñstëæð øf Ñøðë.js' shøµlð þë ëñæþlëð. Æll løçæl ëxtëñsïøñs wïll gët Ëlëçtrøñ's fëtçh ïmplëmëñtætïøñ før thë gløþæl fëtçh ÆPÏ.", - "fetchAdditionalSupport": "Çøñtrøls whëthër Ñøðë.js' fëtçh ïmplëmëñtætïøñ shøµlð þë ëxtëñðëð wïth æððïtïøñæl sµppørt. ǵrrëñtlÿ prøxÿ sµppørt ({0}) æñð sÿstëm çërtïfïçætës ({1}) ærë æððëð whëñ thë çørrëspøñðïñg sëttïñgs ærë ëñæþlëð.", + "fetchAdditionalSupport": "Çøñtrøls whëthër Ñøðë.js' fëtçh ïmplëmëñtætïøñ shøµlð þë ëxtëñðëð wïth æððïtïøñæl sµppørt. ǵrrëñtlÿ prøxÿ sµppørt ({1}) æñð sÿstëm çërtïfïçætës ({2}) ærë æððëð whëñ thë çørrëspøñðïñg sëttïñgs ærë ëñæþlëð. Whëñ ðµrïñg [rëmøtë ðëvëløpmëñt](https://ækæ.ms/vsçøðë-rëmøtë) thë {0} sëttïñg ïs ðïsæþlëð thïs sëttïñg çæñ þë çøñfïgµrëð ïñ thë løçæl æñð thë rëmøtë sëttïñgs sëpærætëlÿ.", "httpConfigurationTitle": "HTTP", - "noProxy": "§pëçïfïës ðømæïñ ñæmës før whïçh prøxÿ sëttïñgs shøµlð þë ïgñørëð før HTTP/HTTP§ rëqµësts.", - "proxy": "Thë prøxÿ sëttïñg tø µsë. Ïf ñøt sët, wïll þë ïñhërïtëð frøm thë `http_prøxÿ` æñð `https_prøxÿ` ëñvïrøñmëñt værïæþlës.", - "proxyAuthorization": "Thë vælµë tø sëñð æs thë `Prøxÿ-Ƶthørïzætïøñ` hëæðër før ëvërÿ ñëtwørk rëqµëst.", - "proxyKerberosServicePrincipal": "Øvërrïðës thë prïñçïpæl sërvïçë ñæmë før Kërþërøs æµthëñtïçætïøñ wïth thë HTTP prøxÿ. Æ ðëfæµlt þæsëð øñ thë prøxÿ høstñæmë ïs µsëð whëñ thïs ïs ñøt sët.", - "proxySupport": "Üsë thë prøxÿ sµppørt før ëxtëñsïøñs.", + "noProxy": "§pëçïfïës ðømæïñ ñæmës før whïçh prøxÿ sëttïñgs shøµlð þë ïgñørëð før HTTP/HTTP§ rëqµësts. Whëñ ðµrïñg [rëmøtë ðëvëløpmëñt](https://ækæ.ms/vsçøðë-rëmøtë) thë {0} sëttïñg ïs ðïsæþlëð thïs sëttïñg çæñ þë çøñfïgµrëð ïñ thë løçæl æñð thë rëmøtë sëttïñgs sëpærætëlÿ.", + "proxy": "Thë prøxÿ sëttïñg tø µsë. Ïf ñøt sët, wïll þë ïñhërïtëð frøm thë `http_prøxÿ` æñð `https_prøxÿ` ëñvïrøñmëñt værïæþlës. Whëñ ðµrïñg [rëmøtë ðëvëløpmëñt](https://ækæ.ms/vsçøðë-rëmøtë) thë {0} sëttïñg ïs ðïsæþlëð thïs sëttïñg çæñ þë çøñfïgµrëð ïñ thë løçæl æñð thë rëmøtë sëttïñgs sëpærætëlÿ.", + "proxyAuthorization": "Thë vælµë tø sëñð æs thë `Prøxÿ-Ƶthørïzætïøñ` hëæðër før ëvërÿ ñëtwørk rëqµëst. Whëñ ðµrïñg [rëmøtë ðëvëløpmëñt](https://ækæ.ms/vsçøðë-rëmøtë) thë {0} sëttïñg ïs ðïsæþlëð thïs sëttïñg çæñ þë çøñfïgµrëð ïñ thë løçæl æñð thë rëmøtë sëttïñgs sëpærætëlÿ.", + "proxyKerberosServicePrincipal": "Øvërrïðës thë prïñçïpæl sërvïçë ñæmë før Kërþërøs æµthëñtïçætïøñ wïth thë HTTP prøxÿ. Æ ðëfæµlt þæsëð øñ thë prøxÿ høstñæmë ïs µsëð whëñ thïs ïs ñøt sët. Whëñ ðµrïñg [rëmøtë ðëvëløpmëñt](https://ækæ.ms/vsçøðë-rëmøtë) thë {0} sëttïñg ïs ðïsæþlëð thïs sëttïñg çæñ þë çøñfïgµrëð ïñ thë løçæl æñð thë rëmøtë sëttïñgs sëpærætëlÿ.", + "proxySupport": "Üsë thë prøxÿ sµppørt før ëxtëñsïøñs. Whëñ ðµrïñg [rëmøtë ðëvëløpmëñt](https://ækæ.ms/vsçøðë-rëmøtë) thë {0} sëttïñg ïs ðïsæþlëð thïs sëttïñg çæñ þë çøñfïgµrëð ïñ thë løçæl æñð thë rëmøtë sëttïñgs sëpærætëlÿ.", "proxySupportFallback": "Ëñæþlë prøxÿ sµppørt før ëxtëñsïøñs, fæll þæçk tø rëqµëst øptïøñs, whëñ ñø prøxÿ føµñð.", "proxySupportOff": "Ðïsæþlë prøxÿ sµppørt før ëxtëñsïøñs.", "proxySupportOn": "Ëñæþlë prøxÿ sµppørt før ëxtëñsïøñs.", "proxySupportOverride": "Ëñæþlë prøxÿ sµppørt før ëxtëñsïøñs, øvërrïðë rëqµëst øptïøñs.", - "strictSSL": "Çøñtrøls whëthër thë prøxÿ sërvër çërtïfïçætë shøµlð þë vërïfïëð ægæïñst thë lïst øf sµpplïëð ÇÆs.", - "systemCertificates": "Çøñtrøls whëthër ÇÆ çërtïfïçætës shøµlð þë løæðëð frøm thë ا. (Øñ Wïñðøws æñð mæçا, æ rëløæð øf thë wïñðøw ïs rëqµïrëð æftër tµrñïñg thïs øff.)", - "systemCertificatesV2": "Çøñtrøls whëthër ëxpërïmëñtæl løæðïñg øf ÇÆ çërtïfïçætës frøm thë ا shøµlð þë ëñæþlëð. Thïs µsës æ mørë gëñëræl æpprøæçh thæñ thë ðëfæµlt ïmplëmëñtætïøñ." + "strictSSL": "Çøñtrøls whëthër thë prøxÿ sërvër çërtïfïçætë shøµlð þë vërïfïëð ægæïñst thë lïst øf sµpplïëð ÇÆs. Whëñ ðµrïñg [rëmøtë ðëvëløpmëñt](https://ækæ.ms/vsçøðë-rëmøtë) thë {0} sëttïñg ïs ðïsæþlëð thïs sëttïñg çæñ þë çøñfïgµrëð ïñ thë løçæl æñð thë rëmøtë sëttïñgs sëpærætëlÿ.", + "systemCertificates": "Çøñtrøls whëthër ÇÆ çërtïfïçætës shøµlð þë løæðëð frøm thë ا. Øñ Wïñðøws æñð mæçا, æ rëløæð øf thë wïñðøw ïs rëqµïrëð æftër tµrñïñg thïs øff. Whëñ ðµrïñg [rëmøtë ðëvëløpmëñt](https://ækæ.ms/vsçøðë-rëmøtë) thë {0} sëttïñg ïs ðïsæþlëð thïs sëttïñg çæñ þë çøñfïgµrëð ïñ thë løçæl æñð thë rëmøtë sëttïñgs sëpærætëlÿ.", + "systemCertificatesV2": "Çøñtrøls whëthër ëxpërïmëñtæl løæðïñg øf ÇÆ çërtïfïçætës frøm thë ا shøµlð þë ëñæþlëð. Thïs µsës æ mørë gëñëræl æpprøæçh thæñ thë ðëfæµlt ïmplëmëñtætïøñ. Whëñ ðµrïñg [rëmøtë ðëvëløpmëñt](https://ækæ.ms/vsçøðë-rëmøtë) thë {0} sëttïñg ïs ðïsæþlëð thïs sëttïñg çæñ þë çøñfïgµrëð ïñ thë løçæl æñð thë rëmøtë sëttïñgs sëpærætëlÿ.", + "useLocalProxy": "Çøñtrøls whëthër ïñ thë rëmøtë ëxtëñsïøñ høst thë løçæl prøxÿ çøñfïgµrætïøñ shøµlð þë µsëð. Thïs sëttïñg øñlÿ æpplïës æs æ rëmøtë sëttïñg ðµrïñg [rëmøtë ðëvëløpmëñt](https://ækæ.ms/vsçøðë-rëmøtë)." }, "vs/platform/shell/node/shellEnv": { "resolveShellEnvError": "Üñæþlë tø rësølvë ÿøµr shëll ëñvïrøñmëñt: {0}", @@ -5687,6 +5688,7 @@ "chat.commandCenter.enabled": "Çøñtrøls whëthër thë çømmæñð çëñtër shøws æ mëñµ før æçtïøñs tø çøñtrøl Çøpïløt (rëqµïrës {0}).", "chat.detectParticipant.enabled": "Ëñæþlës çhæt pærtïçïpæñt æµtøðëtëçtïøñ før pæñël çhæt.", "chat.editing.alwaysSaveWithGeneratedChanges": "Whëthër fïlës thæt hævë çhæñgës mæðë þÿ çhæt çæñ þë sævëð wïthøµt çøñfïrmætïøñ.", + "chat.editing.autoAcceptDelay": "Ðëlæÿ æftër whïçh çhæñgës mæðë þÿ çhæt ærë æµtømætïçællÿ æççëptëð. Vælµës ærë ïñ sëçøñðs, `0` mëæñs ðïsæþlëð æñð `100` sëçøñðs ïs thë mæxïmµm.", "chat.editing.confirmEditRequestRemoval": "Whëthër tø shøw æ çøñfïrmætïøñ þëførë rëmøvïñg æ rëqµëst æñð ïts æssøçïætëð ëðïts.", "chat.editing.confirmEditRequestRetry": "Whëthër tø shøw æ çøñfïrmætïøñ þëførë rëtrÿïñg æ rëqµëst æñð ïts æssøçïætëð ëðïts.", "chat.experimental.detectParticipant.enabled": "Ëñæþlës çhæt pærtïçïpæñt æµtøðëtëçtïøñ før pæñël çhæt.", @@ -5849,12 +5851,15 @@ "diff": "Tøgglë Ðïff Ëðïtør", "discard": "Ðïsçærð Çhæt Ëðït", "discard2": "Ðïsçærð", + "label": "Ñævïgætïøñ §tætµs", "next": "Gø tø Ñëxt Çhæt Ëðït", "prev": "Gø tø Prëvïøµs Çhæt Ëðït", + "review": "Rëvïëw", "undo": "Ðïsçærð thïs Çhæñgë" }, "vs/workbench/contrib/chat/browser/chatEditorController": { "chat.ctxHasRequestInProgress": "Thë çµrrëñt ëðïtør shøws æ fïlë frøm æñ ëðït sëssïøñ whïçh ïs stïll ïñ prøgrëss", + "chat.ctxReviewModeEnabled": "Rëvïëw møðë før çhæt çhæñgës ïs ëñæþlëð", "chat.hasEditorModifications": "Thë çµrrëñt ëðïtør çøñtæïñs çhæt møðïfïçætïøñs", "diff.agent": "{0} (çhæñgës frøm {1})", "diff.generic": "{0} (çhæñgës frøm çhæt)" @@ -5866,7 +5871,6 @@ "vs/workbench/contrib/chat/browser/chatEditorOverlay": { "applyingPercentage": "{0}% Æpplÿïñg ëðïts...", "generating": "Gëñërætïñg ëðïts...", - "label": "Ñævïgætïøñ §tætµs", "nOfM": "{0} øf {1}", "tooltip_11": "1 çhæñgë ïñ 1 fïlë", "tooltip_1n": "1 çhæñgë ïñ {0} fïlës", @@ -12916,7 +12920,7 @@ "workbench.action.terminal.selectNextSuggestion": "§ëlëçt thë Ñëxt §µggëstïøñ", "workbench.action.terminal.selectPrevPageSuggestion": "§ëlëçt thë Prëvïøµs Pægë §µggëstïøñ", "workbench.action.terminal.selectPrevSuggestion": "§ëlëçt thë Prëvïøµs §µggëstïøñ", - "workbench.action.terminal.suggestToggleDetils": "§µggëst Tøgglë Ðëtæïls", + "workbench.action.terminal.suggestToggleDetails": "§µggëst Tøgglë Ðëtæïls", "workbench.action.terminal.suggestToggleExplainMode": "§µggëst Tøgglë Ëxplæïñ Møðës" }, "vs/workbench/contrib/terminalContrib/suggest/common/terminalSuggestConfiguration": { diff --git a/i18n/vscode-language-pack-ru/translations/main.i18n.json b/i18n/vscode-language-pack-ru/translations/main.i18n.json index c50fce6fbc..61d22b62a7 100644 --- a/i18n/vscode-language-pack-ru/translations/main.i18n.json +++ b/i18n/vscode-language-pack-ru/translations/main.i18n.json @@ -2454,20 +2454,21 @@ }, "vs/platform/request/common/request": { "electronFetch": "Управляет использованием реализации API c на языке Electron вместо Node.js. Все локальные расширения будут получать реализацию Fetch нет Electron в качестве глобального API.", - "fetchAdditionalSupport": "Управляет тем, следует ли расширять реализацию извлечения Node.js при помощи дополнительной поддержки. В настоящее время поддержка прокси-сервера ({0}) и системные сертификаты ({1}) добавляются, когда включены соответствующие параметры.", + "fetchAdditionalSupport": "Controls whether Node.js' fetch implementation should be extended with additional support. Currently proxy support ({1}) and system certificates ({2}) are added when the corresponding settings are enabled. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "httpConfigurationTitle": "HTTP", - "noProxy": "Указывает имена доменов, для которых настройки прокси-сервера следует игнорировать для запросов HTTP/HTTPS.", - "proxy": "Параметр используемого прокси-сервера. Если не установлен, он будет унаследовать от переменных среды \"http_proxy\" и \"https_proxy\".", - "proxyAuthorization": "Значение, которое будет отправляться в качестве заголовка \"Proxy-Authorization\" для каждого сетевого запроса.", - "proxyKerberosServicePrincipal": "Переопределяет имя основной службы для проверки подлинности Kerberos с помощью HTTP-прокси. Если значение не задано, используется значение по умолчанию на основе имени узла прокси-сервера.", - "proxySupport": "Используйте поддержку прокси-сервера для расширений.", + "noProxy": "Specifies domain names for which proxy settings should be ignored for HTTP/HTTPS requests. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxy": "The proxy setting to use. If not set, will be inherited from the `http_proxy` and `https_proxy` environment variables. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyAuthorization": "The value to send as the `Proxy-Authorization` header for every network request. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyKerberosServicePrincipal": "Overrides the principal service name for Kerberos authentication with the HTTP proxy. A default based on the proxy hostname is used when this is not set. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxySupport": "Use the proxy support for extensions. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "proxySupportFallback": "Включить поддержку прокси-сервера для расширений, вернуться к вариантам запроса, если прокси-сервер не найден.", "proxySupportOff": "Отключить поддержку прокси-сервера для расширений.", "proxySupportOn": "Включить поддержку прокси-сервера для расширений.", "proxySupportOverride": "Включает поддержку прокси для расширений, переопределяет параметры запроса.", - "strictSSL": "Управляет тем, должен ли сертификат прокси-сервера проверяться по списку предоставленных ЦС.", - "systemCertificates": "Определяет, нужно ли загружать сертификаты ЦС из ОС. (В Windows и macOS после отключения этой функции требуется перезагрузить окно.)", - "systemCertificatesV2": "Определяет, должна ли быть включена экспериментальная загрузка сертификатов ЦС из ОС. Используется более общий подход, чем при реализации по умолчанию." + "strictSSL": "Controls whether the proxy server certificate should be verified against the list of supplied CAs. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificates": "Controls whether CA certificates should be loaded from the OS. On Windows and macOS, a reload of the window is required after turning this off. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificatesV2": "Controls whether experimental loading of CA certificates from the OS should be enabled. This uses a more general approach than the default implementation. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "useLocalProxy": "Controls whether in the remote extension host the local proxy configuration should be used. This setting only applies as a remote setting during [remote development](https://aka.ms/vscode-remote)." }, "vs/platform/shell/node/shellEnv": { "resolveShellEnvError": "Невозможно разрешить среду оболочки: {0}", @@ -5687,6 +5688,7 @@ "chat.commandCenter.enabled": "Управляет отображением меню действий для управления Copilot в командном центре (требуется {0}).", "chat.detectParticipant.enabled": "Включает автоматическое определение участников чата для чата панели.", "chat.editing.alwaysSaveWithGeneratedChanges": "Можно ли сохранять файлы, в которые внесены изменения через чат, без подтверждения.", + "chat.editing.autoAcceptDelay": "Delay after which changes made by chat are automatically accepted. Values are in seconds, `0` means disabled and `100` seconds is the maximum.", "chat.editing.confirmEditRequestRemoval": "Нужно ли показывать подтверждение перед удалением запроса и связанных с ним изменений.", "chat.editing.confirmEditRequestRetry": "Нужно ли показывать подтверждение перед повторной попыткой запроса и связанных с ним изменений.", "chat.experimental.detectParticipant.enabled": "Включает автоматическое определение участников чата для чата панели.", @@ -5849,12 +5851,15 @@ "diff": "Переключение инструмента сравнения Редактор", "discard": "Отменить правку чата", "discard2": "Отменить", + "label": "Navigation Status", "next": "Перейти к следующему изменению чата", "prev": "Перейти к предыдущему изменению чата", + "review": "Review", "undo": "Отменить это изменение" }, "vs/workbench/contrib/chat/browser/chatEditorController": { "chat.ctxHasRequestInProgress": "Текущий редактор показывает файл из сеанса редактирования, который все еще выполняется", + "chat.ctxReviewModeEnabled": "Review mode for chat changes is enabled", "chat.hasEditorModifications": "Текущий редактор содержит изменения чата", "diff.agent": "{0} (изменения из {1})", "diff.generic": "{0} (изменения из чата)" @@ -5866,7 +5871,6 @@ "vs/workbench/contrib/chat/browser/chatEditorOverlay": { "applyingPercentage": "{0}% применения изменений...", "generating": "Создание изменений...", - "label": "Состояние навигации", "nOfM": "{0} из {1}", "tooltip_11": "1 изменение в 1 файле", "tooltip_1n": "1 изменение в файлах ({0})", @@ -12533,7 +12537,7 @@ "terminal.integrated.fontFamily": "Определяет семейство шрифтов терминала. Значение по умолчанию — {0}.", "terminal.integrated.fontLigatures.enabled": "Управляет включением лигатур шрифтов в терминале. Лигатуры будут работать, только если настроенный {0} их поддерживает.", "terminal.integrated.fontLigatures.fallbackLigatures": "Если {0} включена и конкретные {1} не удается проанализировать, это набор последовательностей символов, которые всегда будут рисоваться вместе. Это позволяет использовать фиксированный набор лигатур, даже если шрифт не поддерживается.", - "terminal.integrated.fontLigatures.featureSettings": "Controls what font feature settings are used when ligatures are enabled, in the format of the `font-feature-settings` CSS property. Some examples which may be valid depending on the font:", + "terminal.integrated.fontLigatures.featureSettings": "Управляет тем, какие параметры функции шрифта используются при включении лигатур в формате свойства CSS \"font-feature-settings\". Некоторые примеры, которые могут быть допустимыми в зависимости от шрифта:", "terminal.integrated.fontSize": "Управляет размером шрифта в пикселях для терминала.", "terminal.integrated.fontWeight": "Насыщенность шрифта, используемая в терминале для текста, не являющегося полужирным. Допускаются ключевые слова \"normal\" и \"bold\", а также числа от 1 до 1000.", "terminal.integrated.fontWeightBold": "Насыщенность шрифта, используемая в терминале для полужирного текста. Допускаются ключевые слова \"normal\" и \"bold\", а также числа от 1 до 1000.", @@ -12916,7 +12920,7 @@ "workbench.action.terminal.selectNextSuggestion": "Выбрать следующее предложение", "workbench.action.terminal.selectPrevPageSuggestion": "Выбрать предыдущую предлагаемую страницу", "workbench.action.terminal.selectPrevSuggestion": "Выбрать предыдущее предложение", - "workbench.action.terminal.suggestToggleDetils": "Suggest Toggle Details", + "workbench.action.terminal.suggestToggleDetails": "Suggest Toggle Details", "workbench.action.terminal.suggestToggleExplainMode": "Предложить переключение режимов пояснения" }, "vs/workbench/contrib/terminalContrib/suggest/common/terminalSuggestConfiguration": { diff --git a/i18n/vscode-language-pack-tr/translations/main.i18n.json b/i18n/vscode-language-pack-tr/translations/main.i18n.json index efeb568fef..3862cfb481 100644 --- a/i18n/vscode-language-pack-tr/translations/main.i18n.json +++ b/i18n/vscode-language-pack-tr/translations/main.i18n.json @@ -2454,20 +2454,21 @@ }, "vs/platform/request/common/request": { "electronFetch": "Node.js yerine Electron'un getirme uygulamasının kullanılıp kullanılmayacağını denetler. Tüm yerel uzantılar, genel getirme API'si için Electron'un getirme uygulamasına sahip olacak.", - "fetchAdditionalSupport": "Node.js’in getirme uygulamasının, ek destekle genişletilip genişletilmeyeceğini kontrol eder. Geçerli durumda, ilgili ayarlar etkinleştirildiğinde ara sunucu desteği ({0}) ve sistem sertifikaları ({1}) eklenir.", + "fetchAdditionalSupport": "Controls whether Node.js' fetch implementation should be extended with additional support. Currently proxy support ({1}) and system certificates ({2}) are added when the corresponding settings are enabled. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "httpConfigurationTitle": "HTTP", - "noProxy": "HTTP/HTTPS istekleri için proxy ayarlarının yoksayılması gereken etki alanı adlarını belirtir.", - "proxy": "Kullanılacak ara sunucu ayarı. Ayarlanmamışsa, `http_proxy` ve `https_proxy` ortam değişkenlerinden devralınır.", - "proxyAuthorization": "Her ağ isteği için `Proxy-Authorization` üst bilgisi olarak gönderilecek değer.", - "proxyKerberosServicePrincipal": "HTTP ana sunucusuyla Kerberos kimlik doğrulaması için hizmet asıl adını geçersiz kılar. Bu ayarlanmazsa ara sunucu ana bilgisayar adını temel alan bir varsayılan ad kullanılır.", - "proxySupport": "Uzantılar için ara sunucu desteğini kullan.", + "noProxy": "Specifies domain names for which proxy settings should be ignored for HTTP/HTTPS requests. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxy": "The proxy setting to use. If not set, will be inherited from the `http_proxy` and `https_proxy` environment variables. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyAuthorization": "The value to send as the `Proxy-Authorization` header for every network request. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyKerberosServicePrincipal": "Overrides the principal service name for Kerberos authentication with the HTTP proxy. A default based on the proxy hostname is used when this is not set. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxySupport": "Use the proxy support for extensions. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "proxySupportFallback": "Uzantılar için ara sunucu desteğini etkinleştirin, proxy bulunamazsa istek seçeneklerine geri dönün.", "proxySupportOff": "Uzantılar için ara sunucu desteğini devre dışı bırak.", "proxySupportOn": "Uzantılar için ara sunucu desteğini etkinleştir.", "proxySupportOverride": "Uzantılar için ara sunucu desteğini etkinleştir, istek seçeneklerini geçersiz kıl.", - "strictSSL": "Ara sunucu sertifikasının sağlanan CA listesine göre doğrulanıp doğrulanmayacağını denetler.", - "systemCertificates": "CA sertifikalarının işletim sisteminden yüklenip yüklenmeyeceğini denetler. (Windows ve macOS üzerinde bu ayar kapatıldıktan sonra pencerenin yeniden yüklenmesi gerekir.)", - "systemCertificatesV2": "İşletim sistemindeki CA sertifikalarının deneysel olarak yüklenmesinin etkinleştirilip etkinleştirilmeyeceğini denetler. Bu, varsayılan uygulamadan daha genel bir yaklaşım kullanır." + "strictSSL": "Controls whether the proxy server certificate should be verified against the list of supplied CAs. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificates": "Controls whether CA certificates should be loaded from the OS. On Windows and macOS, a reload of the window is required after turning this off. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificatesV2": "Controls whether experimental loading of CA certificates from the OS should be enabled. This uses a more general approach than the default implementation. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "useLocalProxy": "Controls whether in the remote extension host the local proxy configuration should be used. This setting only applies as a remote setting during [remote development](https://aka.ms/vscode-remote)." }, "vs/platform/shell/node/shellEnv": { "resolveShellEnvError": "Kabuk ortamınız çözümlenemedi: {0}", @@ -5687,6 +5688,7 @@ "chat.commandCenter.enabled": "Komut merkezinin Copilot’ı kontrol etmeye yönelik eylemler için bir menü gösterip göstermeyeceğini kontrol eder ({0} gereklidir).", "chat.detectParticipant.enabled": "Panel sohbeti için sohbet katılımcısını otomatik algılamayı etkinleştirir.", "chat.editing.alwaysSaveWithGeneratedChanges": "Sohbet tarafından yapılan değişiklikler içeren dosyaların onay olmadan kaydedilip kaydedilemeyeceği.", + "chat.editing.autoAcceptDelay": "Delay after which changes made by chat are automatically accepted. Values are in seconds, `0` means disabled and `100` seconds is the maximum.", "chat.editing.confirmEditRequestRemoval": "Bir isteği ve ilişkili düzenlemelerini kaldırmadan önce onayın gösterilip gösterilmeyeceğini belirler.", "chat.editing.confirmEditRequestRetry": "Bir isteği ve ilişkili düzenlemelerini yeniden denemeden önce onay gösterilip gösterilmeyeceğini belirler.", "chat.experimental.detectParticipant.enabled": "Panel sohbeti için sohbet katılımcısını otomatik algılamayı etkinleştirir.", @@ -5849,12 +5851,15 @@ "diff": "Fark Farklarını Düzenleyici", "discard": "Sohbet Düzenlemesini At", "discard2": "At", + "label": "Navigation Status", "next": "Sonraki Sohbet Düzenlemesine Git", "prev": "Önceki Sohbet Düzenlemesine Git", + "review": "Review", "undo": "Bu Değişikliği At" }, "vs/workbench/contrib/chat/browser/chatEditorController": { "chat.ctxHasRequestInProgress": "Geçerli düzenleyici, hâlâ devam eden bir düzenleme oturumundan bir dosya gösteriyor", + "chat.ctxReviewModeEnabled": "Review mode for chat changes is enabled", "chat.hasEditorModifications": "Geçerli düzenleyici sohbet değişiklikleri içeriyor", "diff.agent": "{0} ({1})", "diff.generic": "{0} (sohbetten değişiklikler)" @@ -5866,7 +5871,6 @@ "vs/workbench/contrib/chat/browser/chatEditorOverlay": { "applyingPercentage": "{0}% Düzenleme uygulanıyor...", "generating": "Düzenlemeler oluşturuluyor...", - "label": "Gezinti Durumu", "nOfM": "{0}/{1}", "tooltip_11": "1 dosyada 1 değişiklik", "tooltip_1n": "{0} dosyada 1 değişiklik", @@ -12533,7 +12537,7 @@ "terminal.integrated.fontFamily": "Terminalin yazı tipi ailesini kontrol eder. Varsayılan olarak {0} değeri geçerlidir.", "terminal.integrated.fontLigatures.enabled": "Terminalde yazı tipi ligatürlerinin etkinleştirilip etkinleştirilmeyeceğini kontrol eder. Ligatürler yalnızca yapılandırılan {0} kendilerini destekliyorsa kullanılabilir.", "terminal.integrated.fontLigatures.fallbackLigatures": "Bu {0} etkinleştirildiğinde ve {1} ayrıştırılamıyorsa, bu her zaman birlikte çizilecek karakter dizileri kümesidir. Bu, yazı tipi desteklenmese bile sabit bir ligatür kümesi kullanımına olanak sağlar.", - "terminal.integrated.fontLigatures.featureSettings": "Controls what font feature settings are used when ligatures are enabled, in the format of the `font-feature-settings` CSS property. Some examples which may be valid depending on the font:", + "terminal.integrated.fontLigatures.featureSettings": "Litagürler etkinleştirildiğinde, `font-feature-settings` CSS özelliği biçiminde hangi font özelliği ayarlarının kullanılacağını kontrol eder. Yazı tipine bağlı olarak geçerli olabilecek bazı örnekler:", "terminal.integrated.fontSize": "Terminalin yazı tipi boyutunu piksel cinsinden denetler.", "terminal.integrated.fontWeight": "Kalın olmayan metin için terminal içinde kullanılacak yazı tipi ağırlığı. \"Normal\" ve \"kalın\" anahtar kelimeleri veya 1 ile 1000 arasındaki sayıları kabul eder.", "terminal.integrated.fontWeightBold": "Kalın metin için terminal içinde kullanılacak yazı tipi kalınlığı. \"Normal\" ve \"kalın\" anahtar kelimeleri veya 1 ile 1000 arasındaki sayıları kabul eder.", @@ -12916,7 +12920,7 @@ "workbench.action.terminal.selectNextSuggestion": "Sonraki Öneriyi Seçme", "workbench.action.terminal.selectPrevPageSuggestion": "Önceki Sayfa Önerisini Seçme", "workbench.action.terminal.selectPrevSuggestion": "Önceki Öneriyi Seçme", - "workbench.action.terminal.suggestToggleDetils": "Suggest Toggle Details", + "workbench.action.terminal.suggestToggleDetails": "Suggest Toggle Details", "workbench.action.terminal.suggestToggleExplainMode": "Açıklama Modlarını Öner/Aç/Kapat" }, "vs/workbench/contrib/terminalContrib/suggest/common/terminalSuggestConfiguration": { diff --git a/i18n/vscode-language-pack-zh-hans/translations/main.i18n.json b/i18n/vscode-language-pack-zh-hans/translations/main.i18n.json index 1f980d84ad..7be91dee7f 100644 --- a/i18n/vscode-language-pack-zh-hans/translations/main.i18n.json +++ b/i18n/vscode-language-pack-zh-hans/translations/main.i18n.json @@ -2454,20 +2454,21 @@ }, "vs/platform/request/common/request": { "electronFetch": "控制是否应启用对 Electron 而不是 Node.js 的 fetch 实现的使用。所有本地扩展都将获得用于全局提取 API 的 Electron 提取实现。", - "fetchAdditionalSupport": "控制是否应通过其他支持扩展 Node.js 的提取实现。当前，当启用相应的设置时，将添加代理支持 ({0}) 和系统证书 ({1})。", + "fetchAdditionalSupport": "Controls whether Node.js' fetch implementation should be extended with additional support. Currently proxy support ({1}) and system certificates ({2}) are added when the corresponding settings are enabled. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "httpConfigurationTitle": "HTTP", - "noProxy": "指定 HTTP/HTTPS 请求应忽略代理设置的域名。", - "proxy": "要使用的代理设置。如果未设置，则将从 \"http_proxy\" 和 \"https_proxy\" 环境变量中继承。", - "proxyAuthorization": "要作为每个网络请求的 \"Proxy-Authorization\" 标头发送的值。", - "proxyKerberosServicePrincipal": "使用 HTTP 代理替代 Kerberos 身份验证的主体服务名称。未设置此选项时，将使用基于代理主机名的默认值。", - "proxySupport": "对扩展使用代理支持。", + "noProxy": "Specifies domain names for which proxy settings should be ignored for HTTP/HTTPS requests. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxy": "The proxy setting to use. If not set, will be inherited from the `http_proxy` and `https_proxy` environment variables. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyAuthorization": "The value to send as the `Proxy-Authorization` header for every network request. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyKerberosServicePrincipal": "Overrides the principal service name for Kerberos authentication with the HTTP proxy. A default based on the proxy hostname is used when this is not set. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxySupport": "Use the proxy support for extensions. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "proxySupportFallback": "在未找到代理的情况下，启用扩展的代理支持，回退到请求选项。", "proxySupportOff": "禁用对扩展的代理支持。", "proxySupportOn": "为扩展启用代理支持。", "proxySupportOverride": "为扩展启用代理支持，覆盖请求选项。", - "strictSSL": "控制是否根据提供的 CA 列表验证代理服务器证书。", - "systemCertificates": "控制是否应从操作系统加载 CA 证书。(在 Windows 和 macOS 上, 关闭此窗口后需要重新加载窗口。)", - "systemCertificatesV2": "控制是否应启用从 OS 实验性加载 CA 证书。这会使用比默认实现更为常规的方法。" + "strictSSL": "Controls whether the proxy server certificate should be verified against the list of supplied CAs. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificates": "Controls whether CA certificates should be loaded from the OS. On Windows and macOS, a reload of the window is required after turning this off. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificatesV2": "Controls whether experimental loading of CA certificates from the OS should be enabled. This uses a more general approach than the default implementation. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "useLocalProxy": "Controls whether in the remote extension host the local proxy configuration should be used. This setting only applies as a remote setting during [remote development](https://aka.ms/vscode-remote)." }, "vs/platform/shell/node/shellEnv": { "resolveShellEnvError": "无法解析 shell 环境: {0}", @@ -5687,6 +5688,7 @@ "chat.commandCenter.enabled": "控制命令中心是否显示用于控制 Copilot 的操作菜单(需要 {0})。", "chat.detectParticipant.enabled": "为 panel 聊天启用聊天参与者自动删除功能。", "chat.editing.alwaysSaveWithGeneratedChanges": "是否可以在不确认的情况下保存在聊天中进行了更改的文件。", + "chat.editing.autoAcceptDelay": "Delay after which changes made by chat are automatically accepted. Values are in seconds, `0` means disabled and `100` seconds is the maximum.", "chat.editing.confirmEditRequestRemoval": "是否在删除请求及其关联的编辑之前显示确认消息。", "chat.editing.confirmEditRequestRetry": "是否在重试请求及其关联的编辑之前显示确认消息。", "chat.experimental.detectParticipant.enabled": "为 panel 聊天启用聊天参与者自动删除功能。", @@ -5849,12 +5851,15 @@ "diff": "切换差异编辑器", "discard": "放弃聊天编辑", "discard2": "放弃", + "label": "Navigation Status", "next": "转到下一个聊天编辑", "prev": "转到上一个聊天编辑", + "review": "Review", "undo": "放弃此更改" }, "vs/workbench/contrib/chat/browser/chatEditorController": { "chat.ctxHasRequestInProgress": "当前编辑器显示仍在进行的编辑会话中的文件", + "chat.ctxReviewModeEnabled": "Review mode for chat changes is enabled", "chat.hasEditorModifications": "当前编辑器包含聊天修改", "diff.agent": "{0} (来自 {1}) 的更改", "diff.generic": "{0} (聊天) 中的更改" @@ -5866,7 +5871,6 @@ "vs/workbench/contrib/chat/browser/chatEditorOverlay": { "applyingPercentage": "{0}% 应用编辑...", "generating": "正在生成编辑...", - "label": "导航状态", "nOfM": "{0}/{1}", "tooltip_11": "1 个文件中有 1 个更改", "tooltip_1n": "{0} 个文件中有 1 个更改", @@ -12533,7 +12537,7 @@ "terminal.integrated.fontFamily": "控制终端的字体系列，默认为 {0} 的值。", "terminal.integrated.fontLigatures.enabled": "控制是否在终端中启用字体连字。只有配置的 {0} 支持连字才能正常工作。", "terminal.integrated.fontLigatures.fallbackLigatures": "启用 {0} 且无法分析特定 {1} 时，这是将始终一起绘制的字符序列集。这允许使用固定的连字集，即使字体不受支持。", - "terminal.integrated.fontLigatures.featureSettings": "Controls what font feature settings are used when ligatures are enabled, in the format of the `font-feature-settings` CSS property. Some examples which may be valid depending on the font:", + "terminal.integrated.fontLigatures.featureSettings": "控制启用连字时使用哪些字体功能设置，格式为 `font-feature-settings` CSS 属性。根据字体可能有效的一些示例:", "terminal.integrated.fontSize": "控制终端的字号(以像素为单位)。", "terminal.integrated.fontWeight": "要在终端中用于非粗体文本的字体粗细。接受“正常”和“加粗”这两个关键字，或接受 1-1000 之间的数字。", "terminal.integrated.fontWeightBold": "要在终端中用于粗体文本的字体粗细。接受“正常”和“加粗”这两个关键字，或接受 1-1000 之间的数字。", @@ -12916,7 +12920,7 @@ "workbench.action.terminal.selectNextSuggestion": "选择下一条建议", "workbench.action.terminal.selectPrevPageSuggestion": "选择上一页建议", "workbench.action.terminal.selectPrevSuggestion": "选择上一条建议", - "workbench.action.terminal.suggestToggleDetils": "Suggest Toggle Details", + "workbench.action.terminal.suggestToggleDetails": "Suggest Toggle Details", "workbench.action.terminal.suggestToggleExplainMode": "建议切换解释模式" }, "vs/workbench/contrib/terminalContrib/suggest/common/terminalSuggestConfiguration": { diff --git a/i18n/vscode-language-pack-zh-hant/translations/main.i18n.json b/i18n/vscode-language-pack-zh-hant/translations/main.i18n.json index b05a264b0c..93e793945c 100644 --- a/i18n/vscode-language-pack-zh-hant/translations/main.i18n.json +++ b/i18n/vscode-language-pack-zh-hant/translations/main.i18n.json @@ -2454,20 +2454,21 @@ }, "vs/platform/request/common/request": { "electronFetch": "控制是否應啟用 Electron 的擷取實作，而非 Node.js'。所有本機延伸模組都會取得全域擷取 API 的 Electron 擷取實作。", - "fetchAdditionalSupport": "控制 Node.js 的擷取實作是否應該以額外的支援延伸。啟用對應的設定時，會新增目前的 Proxy 支援 ({0}) 和系統憑證 ({1})。", + "fetchAdditionalSupport": "Controls whether Node.js' fetch implementation should be extended with additional support. Currently proxy support ({1}) and system certificates ({2}) are added when the corresponding settings are enabled. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "httpConfigurationTitle": "HTTP", - "noProxy": "指定應忽略 HTTP/HTTPS 要求之 Proxy 設定的功能變數名稱。", - "proxy": "要使用的 Proxy 設定。若未設定，將從 `http_proxy` 和 `https_proxy` 環境變數繼承。", - "proxyAuthorization": "要針對所有網路要求作為 `Proxy-Authorization` 標頭傳送的值。", - "proxyKerberosServicePrincipal": "使用 HTTP Proxy 來覆寫 Kerberos 驗證的主體服務名稱。未設定時，會使用以 Proxy 主機名稱為基礎的預設值。", - "proxySupport": "為延伸模組使用 Proxy 支援。", + "noProxy": "Specifies domain names for which proxy settings should be ignored for HTTP/HTTPS requests. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxy": "The proxy setting to use. If not set, will be inherited from the `http_proxy` and `https_proxy` environment variables. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyAuthorization": "The value to send as the `Proxy-Authorization` header for every network request. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxyKerberosServicePrincipal": "Overrides the principal service name for Kerberos authentication with the HTTP proxy. A default based on the proxy hostname is used when this is not set. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "proxySupport": "Use the proxy support for extensions. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", "proxySupportFallback": "當找不到 Proxy 時，啟用延伸模組的 Proxy 支援。", "proxySupportOff": "停用延伸模組的 Proxy 支援。", "proxySupportOn": "啟用延伸模組的 Proxy 支援。", "proxySupportOverride": "啟用延伸模組的 Proxy 支援，覆寫要求選項。", - "strictSSL": "控制是否應根據提供的 CA 清單驗證 Proxy 伺服器憑證。", - "systemCertificates": "控制是否應從 OS 載入 CA 憑證。(關閉此設定後，Windows 和 macOS 都需要重新載入視窗。)", - "systemCertificatesV2": "控制是否應啟用來自 OS 的 CA 憑證實驗性載入。這會使用比預設實作更一般的方法。" + "strictSSL": "Controls whether the proxy server certificate should be verified against the list of supplied CAs. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificates": "Controls whether CA certificates should be loaded from the OS. On Windows and macOS, a reload of the window is required after turning this off. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "systemCertificatesV2": "Controls whether experimental loading of CA certificates from the OS should be enabled. This uses a more general approach than the default implementation. When during [remote development](https://aka.ms/vscode-remote) the {0} setting is disabled this setting can be configured in the local and the remote settings separately.", + "useLocalProxy": "Controls whether in the remote extension host the local proxy configuration should be used. This setting only applies as a remote setting during [remote development](https://aka.ms/vscode-remote)." }, "vs/platform/shell/node/shellEnv": { "resolveShellEnvError": "無法解析您的殼層環境: {0}", @@ -5687,6 +5688,7 @@ "chat.commandCenter.enabled": "控制命令中心是否顯示可控制 Copilot 的動作功能表 (需要 {0})。", "chat.detectParticipant.enabled": "為小組聊天啟用聊天參與者自動偵測。", "chat.editing.alwaysSaveWithGeneratedChanges": "是否可以在未確認的情況下儲存由聊天變更的檔案。", + "chat.editing.autoAcceptDelay": "Delay after which changes made by chat are automatically accepted. Values are in seconds, `0` means disabled and `100` seconds is the maximum.", "chat.editing.confirmEditRequestRemoval": "是否要在移除要求及其相關編輯之前顯示確認。", "chat.editing.confirmEditRequestRetry": "是否要在擷取要求及其相關編輯之前顯示確認。", "chat.experimental.detectParticipant.enabled": "為小組聊天啟用聊天參與者自動偵測。", @@ -5849,12 +5851,15 @@ "diff": "切換差異 編輯器", "discard": "捨棄聊天編輯", "discard2": "捨棄", + "label": "Navigation Status", "next": "移至下一個聊天編輯", "prev": "移至上一個聊天編輯", + "review": "Review", "undo": "捨棄此變更" }, "vs/workbench/contrib/chat/browser/chatEditorController": { "chat.ctxHasRequestInProgress": "目前的編輯器顯示來自編輯工作階段的檔案，其仍在進行中", + "chat.ctxReviewModeEnabled": "Review mode for chat changes is enabled", "chat.hasEditorModifications": "目前的編輯器包含聊天修改", "diff.agent": "從 {1}) {0} (變更", "diff.generic": "從聊天) {0} (變更" @@ -5866,7 +5871,6 @@ "vs/workbench/contrib/chat/browser/chatEditorOverlay": { "applyingPercentage": "{0}% 正在套用編輯...", "generating": "正在產生編輯...", - "label": "瀏覽狀態", "nOfM": "{0}/{1}", "tooltip_11": "1 個檔案中 1 個變更", "tooltip_1n": "{0} 個檔案中 1 個變更", @@ -12533,7 +12537,7 @@ "terminal.integrated.fontFamily": "控制終端的字型家族。預設為 {0} 的值。", "terminal.integrated.fontLigatures.enabled": "控制終端中是否啟用字型連字。只有在設定的 {0} 支援時，才能使用連字。", "terminal.integrated.fontLigatures.fallbackLigatures": "當啟用 {0} 且無法剖析特定 {1} 時，這是一組永遠會繪製在一起的字元順序。即使字型不受支援，仍允許使用固定連字集。", - "terminal.integrated.fontLigatures.featureSettings": "Controls what font feature settings are used when ligatures are enabled, in the format of the `font-feature-settings` CSS property. Some examples which may be valid depending on the font:", + "terminal.integrated.fontLigatures.featureSettings": "控制啟用連字功能時所使用的字體特徵設定，其格式為 font-feature-settings CSS 屬性。依據字型而定，某些可能有效的範例:", "terminal.integrated.fontSize": "控制終端的字型大小 (像素)。", "terminal.integrated.fontWeight": "終端中非粗體文字所使用的字型粗細。可接受 \"normal\" 與 \"bold\" 關鍵字，或介於 1 到 1000 之間的數字。", "terminal.integrated.fontWeightBold": "終端中粗體文字所使用的字型粗細。可接受 \"normal\" 與 \"bold\" 關鍵字，或介於 1 到 1000 之間的數字。", @@ -12916,7 +12920,7 @@ "workbench.action.terminal.selectNextSuggestion": "選取下一個建議", "workbench.action.terminal.selectPrevPageSuggestion": "選取上一頁建議", "workbench.action.terminal.selectPrevSuggestion": "選取上一個建議", - "workbench.action.terminal.suggestToggleDetils": "Suggest Toggle Details", + "workbench.action.terminal.suggestToggleDetails": "Suggest Toggle Details", "workbench.action.terminal.suggestToggleExplainMode": "建議切換解說模式" }, "vs/workbench/contrib/terminalContrib/suggest/common/terminalSuggestConfiguration": {