Skip to content

Latest commit

 

History

History
82 lines (46 loc) · 2.76 KB

README.rst

File metadata and controls

82 lines (46 loc) · 2.76 KB

pyprofibus Micropython support

This directory contains scripts and support files for pyprofibus on Micropython.

Installing pyprofibus on a Micropython device

Run the install.sh script to build and install pyprofibus to a Micropython device via USB-UART.

Run install.sh -h for more help.

install.sh prepares and cross-compiles all pyprofibus files for the target platform to optimize resource usage.

Example

Your device is an ESP32 (xtensawin) connected to the computer as /dev/ttyUSB0. Two GSD modules are configured in your pyprofibus .conf file. For example:

  • 6ES7 138-4CA01-0AA0 PM-E DC24V
  • 6ES7 132-4BB30-0AA0 2DO DC24V

The corresponding command to build and install pyprofibus is:

./micropython/install.sh --march xtensawin --module "6ES7 138-4CA01-0AA0 PM-E DC24V" --module "6ES7 132-4BB30-0AA0  2DO DC24V" /dev/ttyUSB0

Prerequisites

The following tools have to be available on your Linux compatible system to build pyprofibus for Micropython:

These tools must be available in your PATH.

You may pass the parameters --pyboard and/or --mpycross to install.sh to specify the path to your tool installation location.

Resource usage

pyprofibus requires a fair amount of memory to run.

Currently about 100 kBytes of memory available to the Micropython Garbage Collector are required to run pyprofibus. The more memory is available, the better. Remember that your application code also has to run in addition to pyprofibus.

You can check the memory available to the GC with the following commands:

import micropython
micropython.mem_info()

Supported devices

pyprofibus has been tested on:

  • ESP32 WROOM32

pyprofibus probably runs on other devices, too. The major limiting factor is the memory available to pyprofibus.

main.py

Please see the file main.py and edit it to your needs.

It is the main file that will be executed after boot. It should start your application and pyprofibus.

boot.py

The script boot.py sets up a basic environment after Micropython boot. You probably don't need to edit the default boot.py script shipped with pyprofibus.