homematicip-rest-api

A Python 3 wrapper for the homematicIP REST API (Access Point Based) Since there is no official documentation about this API everything was done via reverse engineering. Use at your own risk.

Any help from the community thru e.g. Pull Request would be highly appreciated.

Documentation

Documentation can be found under https://homematicip-rest-api.readthedocs.io

Installation

Just run pip install -U homematicip to get the package

"Nightly" Builds

each push on the master branch will trigger a build. That way you can test the latest version of the library with your systems. Just run pip install -U homematicip --pre to get the package.

Usage

First run hmip_generate_auth_token.py (from the command line) to get an auth token for your access point. it will generate a “config.ini” in your current directory. The scripts will look for a config.ini in 3 different locations depending on your OS. Copy the file to one of these locations so that it will be accessible for the scripts.

• General
  • current working directory
• Windows
  • %APPDATA%\homematicip-rest-api
  • %PROGRAMDATA%\homematicip-rest-api
• Linux
  • ~/.homematicip-rest-api/
  • /etc/homematicip-rest-api/
• MAC OS
  • ~/Library/Preferences/homematicip-rest-api/
  • /Library/Application Support/homematicip-rest-api/

Examples

• hmip_cli.py for list devices,groups,securityJournal; set label, turn switches on/off
• Sample Projects are under https://github.com/coreGreenberet/homematicip-samples

Implemented Stuff

• [X] Generate authentication token
• [X] Read current state of the Environment
• [X] Weather
• [X] Location
• [X] Basic Informations( apversion, pinAssigned, timeZone, … )
• [X] Devices (partly)
• [X] Client
• [X] Groups

Homematic IP Devices:

• [X] ALPHA-IP-RBG (Alpha IP Wall Thermostat Display)
• [X] ALPHA-IP-RBGa (ALpha IP Wall Thermostat Display analog)
• [X] HMIP-ASIR (Alarm Siren - indoor)
• [X] HMIP-ASIR-B1 (Alarm Siren - indoor) Silvercrest Edition
• [X] HMIP-ASIR-2 (Alarm Siren - indoor) New Version
• [X] HMIP-ASIR-O (Alarm Siren - outdoor)
• [X] HMIP-BBL (Blind Actuator for brand switches)
• [X] HMIP-BDT (Dimming Actuator for brand switches)
• [X] HMIP-BRC2 (Remote Control for brand switches – 2x channels)
• [X] HMIP-BROLL (Shutter Actuator - brand-mount)
• [X] HMIP-BSL (Switch Actuator for brand switches – with signal lamp)
• [X] HMIP-BSM (Brand Switch and Meter Actuator)
• [X] HMIP-BWTH (Wall Thermostat Display with switching output – for brand switches, 230V)
• [ ] HMIP-BWTH24 (Wall Thermostat Display with switching output – for brand switches, 24V)
• [ ] HMIP-DBB (Doorbell Push-Button)
• [ ] HMIP-DLD (Door Lock Drive)
• [X] HMIP-DRBLI4 (Blind Actuator for DIN rail mount – 4 channels)
• [X] HMIP-DRSI1 (Switch Actuator for DIN rail mount – 1x channel)
• [ ] HMIP-DRDI3 (Dimming Actuator Inbound 230V – 3x channels, 200W per channel) electrical DIN rail
• [X] HMIP-DRSI4 (Switch Actuator for DIN rail mount – 4x channels)
• [ ] HMIP-DSD-PCB (Door Signal Dector PCB)
• [X] HMIP-eTRV (Heating-Thermostat with Display)
• [X] HMIP-eTRV-2 (Heating-Thermostat with Display) New Version
• [ ] HMIP-eTRV-2-UK (UK Version not tested, but it should work)
• [X] HMIP-eTRV-B (Heating-Thermostat basic with Display)
• [ ] HMIP-eTRV-B-UK (UK Version not tested, but it should work)
• [X] HMIP-eTRV-B1 (Heating-Thermostat basic with Display) Silvercrest Edition
• [X] HMIP-eTRV-C (Heating-Thermostat compact without display)
• [X] HMIP-eTRV-C2 (Heating-Thermostat compact without display) New Version
• [ ] HMIP-eTRV-E (Heating-Thermostat New Generation)
• [X] HMIP-FAL230-C6 (Floor Heating Actuator – 6x channels, 230V)
• [X] HMIP-FAL230-C10 (Floor Heating Actuator – 10x channels, 230V)
• [X] HMIP-FAL24-C6 (Floor Heating Actuator – 6x channels, 24V)
• [X] HMIP-FAL24-C10 (Floor Heating Actuator – 10x channels, 24V)
• [X] HMIP-FALMOT-C12 (Floor Heating Actuator – 12x channels, motorised)
• [X] HMIP-FBL (Blind Actuator - flush-mount)
• [X] HMIP-FCI1 (Contact Interface flush-mount – 1x channel)
• [X] HMIP-FCI6 (Contact Interface flush-mount – 6x channels)
• [X] HMIP-FDT (Dimming Actuator - flush-mount)
• [X] HMIP-FROLL (Shutter Actuator - flush-mount)
• [X] HMIP-FSM (Switch Actuator and Meter 5A – flush-mount)
• [X] HMIP-FSM16 (Switch Actuator and Meter 16A – flush-mount)
• [X] HMIP-FSI16 (Switch Actuator with Push-button Input 230V, 16A)
• [X] HMIP-HAP (Cloud Access Point)
• [X] HMIP-HAP-B1 (Cloud Access Point) Silvercrest Edition
• [X] HMIP-HDM1 (Hunter Douglas & erfal window blinds)
• [ ] HMIP-K-DRBLI4 (Blinds Actuator – 4x channels, 230V, 2,2A / 500W per channel) electrical DIN rail
• [ ] HMIP-K-DRSI1 (Actuator Inbound 230V – 1x channel) electrical DIN rail
• [ ] HMIP-K-DRDI3 (Dimming Actuator Inbound 230V – 3x channels, 200W per channel) electrical DIN rail
• [ ] HMIP-K-DRSI4 (Swich Actuator – 4x channels, 16A per channel) electrical DIN rail
• [X] HMIP-KRCA (Key Ring Remote Control & Alarm)
• [X] HMIP-KRC4 (Key Ring Remote Control - 4x buttons)
• [ ] HMIP-MIO16-PCB (Multi Analog/Digitial Interface - Switch Circuit Board)
• [X] HMIP-MIOB (Multi IO Box for floor heating & cooling)
• [X] HMIP-MOD-HO (Garage Door Module for Hörmann)
• [X] HMIP-MOD-OC8 (Open Collector Module Receiver - 8x)
• [X] HMIP-MOD-RC8 (Open Collector Module Sender - 8x)
• [X] HMIP-MOD-TM (Garage Door Module for Novoferm and Tormatic door operators)
• [ ] HMIP-MP3P (Combination Signalling Device MP3)
• [X] HMIP-PCBS (Switch Circuit Board - 1x channel)
• [X] HMIP-PCBS2 (Switch Circuit Board - 2x channels)
• [X] HMIP-PCBS-BAT (Switch Circuit Board with Battery - 1x channel)
• [X] HMIP-PDT (Plugable Dimmer)
• [ ] HMIP-PDT-UK (UK Version not tested, but it should work)
• [X] HMIP-PMFS (Plugable Power Supply Monitoring)
• [X] HMIP-PS (Plugable Switch)
• [X] HMIP-PSM (Plugable Switch Measuring, Type F - Standard for Homematic)
• [ ] HMIP-PSM-CH (Type J not tested, but it should work)
• [ ] HMIP-PSM-IT (Type L not tested, but it should work)
• [ ] HMIP-PSM-PE (Type E not tested, but it should work)
• [ ] HMIP-PSM-UK (Type G not tested, but it should work)
• [X] HMIP-RC8 (Remote Control - 8x buttons)
• [ ] HMIP-RCB1 (Remote Control - 1x button)
• [X] HMIP-SAM (Acceleration Sensor)
• [X] HMIP-SCI (Contact Interface Sensor)
• [ ] HMIP-SCTH230 (CO2, Temperature and Humidity Sensor 230V)
• [ ] HMIP-SFD (Fine Dust Sensor)
• [X] HMIP-SLO (Light Sensor - outdoor)
• [X] HMIP-SMI (Motion Detector with Brightness Sensor - indoor)
• [X] HMIP-SMI55 (Motion Detector with Brightness Sensor and Remote Control - 2x buttons)
• [X] HMIP-SMO (Motion Detector with Brightness Sensor - outdoor)
• [X] HMIP-SMO-A (Motion Detector with Brightness Sensor - outdoor, anthracite)
• [X] HMIP-SPDR (Passage Sensor with Direction Recognition)
• [X] HMIP-SPI (Presence Sensor - indoor)
• [X] HMIP-SRH (Window Rotary Handle Sensor)
• [X] HMIP-SRD (Rain Sensor)
• [X] HMIP-STE2-PCB (Temperature Difference Sensors - 2x sensors)
• [X] HMIP-STH (Temperature and Humidity Sensor without display - indoor)
• [X] HMIP-STHD (Temperature and Humidity Sensor with display - indoor)
• [X] HMIP-STHO (Temperature and Humidity Sensor - outdoor)
• [X] HMIP-STHO-A (Temperature and Humidity Sensor – outdoor, anthracite)
• [X] HMIP-STV (Inclination and vibration Sensor)
• [X] HMIP-SWD (Water Sensor)
• [X] HMIP-SWDM (Door / Window Contact - magnetic)
• [X] HMIP-SWDM-B2 (Door / Window Contact - magnetic) Silvercrest Edition
• [X] HMIP-SWDO (Shutter Contact)
• [X] HMIP-SWDO-I (Shutter Contact Invisible)
• [X] HMIP-SWDO-PL (Shutter Contact Plus)
• [X] HMIP-SWO-B (Weather Sensor - Basic)
• [X] HMIP-SWO-PL (Weather Sensor – Plus)
• [X] HMIP-SWO-PR (Weather Sensor – Pro)
• [X] HMIP-SWSD (Smoke Detector)
• [ ] HMIP-USBSM (USB Switching Measurement Actuator)
• [ ] HMIP-WGC (Garage Door Button)
• [X] HMIP-WHS2 (Switch Actuator for heating systems – 2x channels)
• [ ] HMIP-WLAN-HAP (WLAN Access Point)
• [X] HMIP-WRC2 (Wall-mount Remote Control - 2x buttons)
• [X] HMIP-WRC6 (Wall-mount Remote Control - 6x buttons)
• [X] HMIP-WRCC2 (Wall-mount Remote Control – flat)
• [ ] HMIP-WRCD (Wall-mount Remote Control - E-Paper-Status display)
• [ ] HMIP-WRCR (Wall-mount Remote Control - Rotary)
• [ ] HMIP-WT (Wall Mounted Thermostat without adjusting wheel) #probably only prototype for WTH-B and was not released
• [X] HMIP-WTH (Wall Mounted Thermostat Pro with Display)
• [X] HMIP-WTH-2 (Wall Mounted Thermostat Pro with Display) New Version
• [X] HMIP-WTH-B (Wall Mounted Thermostat basic without adjusting wheel)

Homematic IP Wired Devices (no radio signal):

• [X] HMIPW-DRAP (Homematic IP Wired Access Point)
• [ ] HMIPW-BRC2 (Homematic IP Wired Remote Control for brand switches – 2x channels)
• [ ] HMIPW-DRBL4 (Homematic IP Wired Blinds Actuator – 4x channels)
• [X] HMIPW-DRD3 (Homematic IP Wired Dimming Actuator – 3x channels)
• [ ] HMIPW-DRS4 (Homematic IP Wired Switch Actuator – 4x channels)
• [ ] HMIPW-DRI16 (Homematic IP Wired Inbound module – 16x channels)
• [X] HMIPW-DRI32 (Homematic IP Wired Inbound module – 32x channels)
• [X] HMIPW-DRS8 (Homematic IP Wired Switch Actuator – 8x channels)
• [ ] HMIPW-FAL24-C6 (Homematic IP Wired Floor Heating Actuator – 6x channels, 24V)
• [ ] HMIPW-FAL24-C10 (Homematic IP Wired Floor Heating Actuator – 10x channels, 24V)
• [ ] HMIPW-FAL230-C6 (Homematic IP Wired Floor Heating Actuator – 6x channels, 230V)
• [ ] HMIPW-FAL230-C10 (Homematic IP Wired Floor Heating Actuator – 10x channels, 230V)
• [ ] HMIPW-FALMOT-C12 (Homematic IP Wired Floor Heating Actuator – 12x channels, motorised)
• [ ] HMIPW-FIO6 (Homematic IP Wired IO Module flush-mount – 6x channels)
• [ ] HMIPW-SMI55 (Homematic IP Wired Motion Detector with Brightness Sensor and Remote Control - 2x buttons)
• [ ] HMIPW-SPI (Homematic IP Wired Presence Sensor - indoor)
• [ ] HMIPW-STH (Homematic IP Wired Temperature and Humidity Sensor without display - indoor)
• [ ] HMIPW-STHD (Homematic IP Wired Temperature and Humidity Sensor with display - indoor)
• [ ] HMIPW-WRC2 (Homematic IP Wired Wall-mount Remote Control - 2x channels)
• [ ] HMIPW-WTH (Homematic IP Wired Wall Mounted Thermostat Pro with Display)

Events

It’s also possible to use push notifications based on a websocket connection

##initialize the api
#...
#get the home object
home = homematicip.Home()
#add a function to handle new events
home.onEvent += printEvents
#enable the event connection -> this will also start the websocket connection to the homeMaticIP Cloud
home.enable_events()


#example function to display incoming events
def printEvents(eventList):
    for event in eventList:
        print "EventType: {} Data: {}".format(event["eventType"], event["data"])

#if needed you can close the websocket connection with
home.disable_events()