This directory contains the definitions of each action in the migration DSL, in the form of a commented Yaml file.
Specific topics are covered below.
NB For more examples of valid Yaml files describing migrations, have a look in the directory Tests/dsl/good
By default the bundle uses eng-GB for creating all multilingual entities (contents, contentTypes, users, etc...). In order to create content in a different language, either specify it in your yml definition files (recommended), or use a command-line switch.
Below is an example snippet for creation/update of a content with a field of type ezimage:
attributes:
image:
path: /path/to/the/image.jpg
alt_text: 'Example alt text'
A simplified form, which does not allow for setting the 'alt' attribute, is:
attributes:
image: /path/to/the/image.jpg
The paths to files/images/media in the definition are either
- absolute paths, or
- relative paths from the MigrationVersions/images, MigrationVersions/files or MigrationVersions/media folders.
For example using the path from the snippet above the system would look first for the image file in
MigrationVersions/images/path/to/the/image.jpg in the bundle's directory, and if no file is found there, look for
/path/to/the/image.jpg
Please see the Contents.yml DSL definition file in the Resources/doc/DSL folder for more information.
At the moment, the creation of blocks via the eZPublish 5 content API is not supported, and the migration bundle does have code to work around that. You will be able to create content with a field of type eZPage, but not add or edits its blocks.
The Yaml definitions support setting references of values of certain attributes, that you can retrieve in the subsequent migration steps.
Setting a reference is the same as creating a new variable - you decide its name, and which value it will hold (the value is taken from the entity currently being created / updated). Once the reference is set, you can use make use of its value in other steps.
For example, you could set a reference to the location id of a folder that you create and then use that as the parent location for creating articles in that folder.
Here is an example on using references: the first step creates a new content type in the system and sets a reference to its id; the second step adds a new policy to the editor role to allow editors to create objects of the new content type under the location with id 2.
-
mode: create
type: content_type
content_type_group: 1
name: Section Page
identifier: section_page
name_pattern: <title>
is_container: true
attributes:
-
type: ezstring
name: Title
identifier: title
required: true
references:
-
identifier: section_page_class
attribute: content_type_id
-
mode: update
type: role
name: Editor
policies:
add:
-
module: content
function: create
limitation:
-
type: Node
value: [2]
-
type: Class
value: [ "reference:section_page_class" ]
To set the reference we use the references section of the content type DSL. We set a reference named
section_page_class to store the content type id.
In the update role action we retrieve the value of the reference by using the reference:section_page_class.
To tell the system that you want to use a previously stored reference you need to prefix the reference name with the string
reference:. This instructs the system to look in the list of stored references and replace the current tag with the value
associated to the reference found. Eg:
Important: Please note that the reference must be a quoted string, as
reference:<reference_name>uses YAML reserved characters.Bad:
some_key: reference:foo
Good:some_key: 'reference:foo'
Note that, unlike variables in programming laguages, you can not change the value of an existing references by default.
This is done to prevent accidental overwrites of an existing reference with another one, as the most common use case
for reference is set once, use multiple times.
If you want to be able to change the value of a reference after having created it, use the overwrite tag:
references:
-
identifier: section_page_class
attribute: content_type_id
overwrite: true
NB: references are stored in memory only and will not propagate across different migrations, unless you execute the migrations in a single command (and without the 'separate processes' switch).
NB: please do not use the character ] in your reference names. See below for the reason.
To tell the system to look for references in the xml that is used to populate ezxmltext type fields the Yaml definition will need to use the definition used for defining complex attributes. Please see the importing binary files section above on how to define complex data type handling for an attribute.
Below is an example snippet showing how to define references for ezxmltext.
attributes:
- description:
type: ezxmltext
content: '<section><paragraph><embed view="embed" size="medium" object_id="[reference:test_image]" /></paragraph></section>'
NB: when using references in xml texts you must include the two extra characters [ and ], which are not needed
when using them as part of other elements in the yml file.
This is done to minimize the chances that some random bits of text get modified by error (and because we need an
end-of-reference identifier character).
Look in the single DSL files for the complete set of attributes which can be used to set reference values, as well as the places where references will be substituted if found.
It is possible since version 3.5 to create references manually using a dedicated migration step, and even bulk-load them from a file. Symfony configuration parameters can be used as values for these manually-created references.
It is possible since version 3.5 to dump references to screen for debug purposes. See References.yml
For more information please see the DSL definitions in the Resources/doc/DSL folder.