Docker使用linux iptables来控制与它创建的接口和网络之间的通信
docker安装好的时候，本身是没有任何添加任何iptables规则的，当docker Daemon启动的时候，nat将会增加 DOCKER链；filter表增加DOCKER和DOCKER-ISOLATION链
只是启动daemon的时候, 是没有创建overlay网络的.
root@computer-node4 /root >iptables -L -t nat
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
DOCKER all -- anywhere anywhere ADDRTYPE match dst-type LOCAL
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
DOCKER all -- anywhere !loopback/8 ADDRTYPE match dst-type LOCAL
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
MASQUERADE all -- 172.17.0.0/16 anywhere
Chain DOCKER (2 references)
target prot opt source destination
RETURN all -- anywhere anywhere
root@computer-node4 /home/czs >iptables -L -t filter
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT udp -- anywhere anywhere udp dpt:domain
Chain FORWARD (policy ACCEPT)
target prot opt source destination
DOCKER-ISOLATION all -- anywhere anywhere
DOCKER all -- anywhere anywhere
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
ACCEPT udp -- anywhere anywhere udp dpt:bootpc
Chain DOCKER (1 references)
target prot opt source destination
Chain DOCKER-ISOLATION (1 references)
target prot opt source destination
RETURN all -- anywhere anywhere
如果这个时候新建一个swarm网络，docker会默认新建一个名称是ingress的overlay网络，但是这个时候对应的iptables规则并没有建立好
在swarm下启动一个容器(使用端口映射)，即使用该overlay网络启动一个容器，这个时候会在filter和nat表里面新建一条DOCKER-INGRESS链
...... 其他省略,可以看到在filter表里面, FORWARD链里面增加一条规则,并新增了DOCKER-INGRESS链 ......
Chain FORWARD (policy ACCEPT)
target prot opt source destination
DOCKER-INGRESS all -- anywhere anywhere
DOCKER-ISOLATION all -- anywhere anywhere
Chain DOCKER-INGRESS (1 references)
target prot opt source destination
ACCEPT tcp -- anywhere anywhere tcp dpt:radan-http
ACCEPT tcp -- anywhere anywhere state RELATED,ESTABLISHED tcp spt:radan-http
RETURN all -- anywhere anywhere
...... 其他省略,可以看到在nat表里面, OUTPUT链里面增加一条规则,并新增了DOCKER-INGRESS链 ......
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
DOCKER-INGRESS all -- anywhere anywhere ADDRTYPE match dst-type LOCAL
DOCKER all -- anywhere !loopback/8 ADDRTYPE match dst-type LOCAL
Chain DOCKER-INGRESS (2 references)
target prot opt source destination
DNAT tcp -- anywhere anywhere tcp dpt:radan-http to:172.18.0.2:8088
RETURN all -- anywhere anywhere
filter表是网络或接口的流量的安全规则表
过滤器表具有3个链：用于处理到达主机并且去往同一主机的分组的输入链，用于发送到外部目的地的主机的分组的输出链，以及用于进入主机但具有目的地外部主机
Chain DOCKER (2 references)
pkts bytes target prot opt in out source destination
0 0 ACCEPT tcp -- !docker_gwbridge docker_gwbridge anywhere 172.18.0.5 tcp dpt:4534
0 0 ACCEPT tcp -- !docker_gwbridge docker_gwbridge anywhere 172.18.0.5 tcp dpt:4533
0 0 ACCEPT tcp -- !docker_gwbridge docker_gwbridge anywhere 172.18.0.5 tcp dpt:4532
0 0 ACCEPT tcp -- !docker_gwbridge docker_gwbridge anywhere 172.18.0.6 tcp dpt:4531
Chain DOCKER-INGRESS (1 references)
pkts bytes target prot opt in out source destination
10 1044 ACCEPT tcp -- any any anywhere anywhere tcp dpt:4511
6 2030 ACCEPT tcp -- any any anywhere anywhere state RELATED,ESTABLISHED tcp spt:4511
1215 228K ACCEPT tcp -- any any anywhere anywhere tcp dpt:4510
799 9728K ACCEPT tcp -- any any anywhere anywhere state RELATED,ESTABLISHED tcp spt:4510
282 23069 RETURN all -- any any anywhere anywhere
Chain DOCKER-ISOLATION (1 references)
pkts bytes target prot opt in out source destination
0 0 DROP all -- docker_gwbridge docker0 anywhere anywhere
0 0 DROP all -- docker0 docker_gwbridge anywhere anywhere
282 23069 RETURN all -- any any anywhere anywhere
DOCKER-ISOLATION包含限制不同容器网络之间的访问的规则
Docker使用nat允许桥接网络上的容器与docker主机之外的目的地进行通信（否则指向容器网络的路由必须在docker主机的网络中添加）
Chain DOCKER (2 references)
target prot opt source destination
RETURN all -- anywhere anywhere
RETURN all -- anywhere anywhere
DNAT tcp -- anywhere anywhere tcp dpt:4534 to:172.18.0.5:4534
DNAT tcp -- anywhere anywhere tcp dpt:4533 to:172.18.0.5:4533
DNAT tcp -- anywhere anywhere tcp dpt:4532 to:172.18.0.5:4532
DNAT tcp -- anywhere anywhere tcp dpt:4531 to:172.18.0.6:4531
Chain DOCKER-INGRESS (2 references)
target prot opt source destination
DNAT tcp -- anywhere anywhere tcp dpt:4511 to:172.18.0.2:4511
DNAT tcp -- anywhere anywhere tcp dpt:4510 to:172.18.0.2:4510
RETURN all -- anywhere anywhere
从上面的叙述可以知道, docker的iptables添加可以分成两部分, 一部分是daemon在启动的时候,一部分是容器在启动的时候.
在createNetwork()[bridge.go]中,遍历循环一个结构体{Condition bool ; Fn setupStep}, 里面保存了创建网络的步骤, 其中一步为 network.setupIPTables()
在setupIPTables()里面,判断config.Internal,如果为真,则调用setupInternalNetworkRules()(?看含义为真是内部网络,还设置网络规则?); 如果为假就调用一系列设置: 先调用setupIPTablesInternal(),再getDriverChains()获取了需要设置的规则,最后用ProgramChain()函数设置了Filter表和Nat表的链;
setupIPTables()
-> if networkConfiguration.Internal为真
-> setupInternalNetworkRules()
-> 给filter表设置了DOCKER-ISOLATION链的规则,设置网卡流入流出的过滤规则
"-A DOCKER-ISOLATION -i docker0 -o docker_gwbridge -j DROP"
"-A DOCKER-ISOLATION -i docker_gwbridge -o docker0 -j DROP"
-> setIcc() 设置容器内部间联系
-> 如果是insert为true,在FORWARD链中
如果不允许ICC,则删除ACCEPT，"-A"加入DROP规则; 如果允许则删除DROP规则, "-I"加入ACCEPT规则
-> 如果是insert为false,删除对应规则
-> bridgeNetwork.registerIptCleanFunc()
就是把上面的函数注册到清理函数列表里面，只是insert标志位置为false
-> if networkConfiguration.Internal为假,
-> setupIPTablesInternal()
-> 根据ipmasq和hairpin条件判断新增:Nat表的POSTROUTING新增了两条规则; 新增DOCKER链; Filter表FORWARD链增加两条规则;
-> setIcc()
-> bridgeNetwork.registerIptCleanFunc()
-> getDriverChains()获取了nat和filter表的规则链
-> ProgramChain()分别设置nat和filter表规则链
-> registerIptCleanFunc()注册清理函数
-> n.portMapper.SetIptablesChain() 设了链到portmapper里面
iptables的的Ingress规则创建,在使用swarm的task(容器)启动的时候创建
同容器启动流程一样, 代码走到 connectToNetwork() -> ep.Join()里面的时候, 开始创建Ingress规则
sbJoin()
-> ep.addToCluster()
-> 里面根据endpoint获取它的network,再由network获取controller
-> 如果endpoint不是匿名,ep的svcID不为空的时候,调用addServiceBinding()
-> 最后调用了network.addLBBackend() -> sandbox.addLBBackend()
-> 如果addService为true, 如果sb.ingress为true, 则调用programIngress()
-> 先判断nat和filter表里面是否有DOCKER-INGRESS链,如果有则先删除
-> 如果是增加操作请求,把Ingress所有规则和链都加上
bridge模式,会比其他网络模式多一些iptables规则
-> containerStart() [start.go]
-> daemon.initializeNetworking()
1. getNetworkedContainer()
2. allocateNetwork()
(1). controller.SandboxDestroy() #清理旧的沙盒
(2). 判断容器网络设置如果为空,更新一把
(3). connectToNetwork()
a). updateNetworkConfig()
b). getNetworkSandbox()
c). updateEndpointNetworkSettings()
d). BuildJoinOptions()
e). ep.Join()
-> 判断网络和endpoint是否存在,存在则退出
-> 各种获取,赋值,更新
-> populateNetworkResources() #ep填到sb中
-> addToCluster()
-> ProgramExternalConnectivity()
-> allocatePorts()
-> allocatePort()
-> MapRange() [mapper.go] #容器地址端口映射到主机
-> pm.forward #设置Iptables
-> Forward() [iptables.go]
removeIPChains() 删除规则链: 调用了 chain.Remove() 函数删除了Nat表的DOCKER链，Filter表的DOCKER、DOCKER-ISOLATION两个链。