functions.c

/* Copyright 2023 Dual Tachyon
 * https://github.com/DualTachyon
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 *     Unless required by applicable law or agreed to in writing, software
 *     distributed under the License is distributed on an "AS IS" BASIS,
 *     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *     See the License for the specific language governing permissions and
 *     limitations under the License.
 */

#include "app/dtmf.h"
#ifdef ENABLE_FMRADIO
	#include "app/fm.h"
#endif
#include "bsp/dp32g030/gpio.h"
#include "dcs.h"
#include "driver/backlight.h"
#ifdef ENABLE_FMRADIO
	#include "driver/bk1080.h"
#endif
#include "driver/bk4819.h"
#include "driver/gpio.h"
#include "driver/system.h"
#if defined(ENABLE_UART) && defined(ENABLE_UART_DEBUG)
	#include "driver/uart.h"
#endif
#include "frequencies.h"
#include "functions.h"
#include "helper/battery.h"
#ifdef ENABLE_MDC1200
	#include "mdc1200.h"
#endif
#include "misc.h"
#include "radio.h"
#include "settings.h"
#include "ui/menu.h"
#include "ui/status.h"
#include "ui/ui.h"

function_type_t g_current_function;

void FUNCTION_Init(void)
{
	if (IS_NOT_NOAA_CHANNEL(g_rx_vfo->channel_save))
	{
		g_current_code_type = g_selected_code_type;
		if (g_css_scan_mode == CSS_SCAN_MODE_OFF)
			g_current_code_type = (g_rx_vfo->channel.mod_mode > 0) ? CODE_TYPE_NONE : g_rx_vfo->p_rx->code_type;
	}
	else
		g_current_code_type = CODE_TYPE_CONTINUOUS_TONE;

	#ifdef ENABLE_DTMF_CALLING
		DTMF_clear_RX();
	#endif

	g_cxcss_tail_found = false;
	g_cdcss_lost       = false;
	g_ctcss_lost       = false;

	#ifdef ENABLE_VOX
		g_vox_lost = false;
	#endif

	g_squelch_open = false;

	g_flag_tail_tone_elimination_complete = false;
	g_tail_tone_elimination_tick_10ms     = 0;
	g_found_ctcss                         = false;
	g_found_cdcss                         = false;
	g_found_ctcss_tick_10ms               = 0;
	g_found_cdcss_tick_10ms               = 0;
	g_end_of_rx_detected_maybe            = false;

	#ifdef ENABLE_NOAA
		g_noaa_tick_10ms = 0;
	#endif

	g_update_status = true;
}

void FUNCTION_Select(function_type_t Function)
{
	const function_type_t prev_func = g_current_function;
	const bool was_power_save = (prev_func == FUNCTION_POWER_SAVE);

	g_current_function = Function;

	if (was_power_save && Function != FUNCTION_POWER_SAVE)
	{	// wake up
		BK4819_Conditional_RX_TurnOn();
		g_rx_idle_mode = false;
		UI_DisplayStatus(false);
	}

	g_update_status = true;

	switch (Function)
	{
		case FUNCTION_FOREGROUND:
			#if defined(ENABLE_UART) && defined(ENABLE_UART_DEBUG)
				UART_SendText("func forground\r\n");
			#endif

			if (g_dtmf_reply_state != DTMF_REPLY_NONE)
				RADIO_PrepareCssTX();

			if (prev_func == FUNCTION_TRANSMIT)
			{
				g_vfo_rssi_bar_level[0] = 0;
				g_vfo_rssi_bar_level[1] = 0;
			}
			else
			if (prev_func != FUNCTION_RECEIVE)
				break;

			#ifdef ENABLE_FMRADIO
				if (g_fm_radio_mode)
					g_fm_restore_tick_10ms = g_eeprom.config.setting.scan_hold_time * 50;
			#endif

			#ifdef ENABLE_DTMF_CALLING
				if (g_dtmf_call_state == DTMF_CALL_STATE_CALL_OUT ||
					g_dtmf_call_state == DTMF_CALL_STATE_RECEIVED ||
					g_dtmf_call_state == DTMF_CALL_STATE_RECEIVED_STAY)
				{
					g_dtmf_auto_reset_time_500ms = g_eeprom.config.setting.dtmf.auto_reset_time * 2;
				}
			#endif

			return;

		case FUNCTION_NEW_RECEIVE:
			#if defined(ENABLE_UART) && defined(ENABLE_UART_DEBUG)
				UART_printf("func new receive %u\r\n", g_rx_vfo->freq_config_rx.frequency);
			#endif
			break;

		case FUNCTION_RECEIVE:
			#if defined(ENABLE_UART) && defined(ENABLE_UART_DEBUG)
				UART_printf("func receive %u\r\n", g_rx_vfo->freq_config_rx.frequency);
			#endif
			break;

		case FUNCTION_POWER_SAVE:
			#if defined(ENABLE_UART) && defined(ENABLE_UART_DEBUG)
				UART_SendText("func power save\r\n");
			#endif

			if (g_flash_light_state != FLASHLIGHT_SOS)
			{
				g_monitor_enabled = false;
				GPIO_ClearBit(&GPIOC->DATA, GPIOC_PIN_SPEAKER);
			}

			g_power_save_tick_10ms = g_eeprom.config.setting.battery_save_ratio * 10;
			g_power_save_expired   = false;

			g_rx_idle_mode = true;

			BK4819_DisableVox();
			BK4819_Sleep();

			BK4819_set_GPIO_pin(BK4819_GPIO0_PIN28_RX_ENABLE, false);

			if (g_current_display_screen != DISPLAY_MENU)
				GUI_SelectNextDisplay(DISPLAY_MAIN);

			return;

		case FUNCTION_TRANSMIT:
			#if defined(ENABLE_UART) && defined(ENABLE_UART_DEBUG)
				UART_printf("func transmit %u\r\n", g_tx_vfo->freq_config_tx.frequency);
			#endif

			g_tx_timer_tick_500ms = 0;
			g_tx_timeout_reached  = false;
			g_flag_end_tx         = false;

			g_rtte_count_down = 0;

			#if defined(ENABLE_ALARM) || (ENABLE_TX_TONE_HZ > 0)
				if (g_alarm_state == ALARM_STATE_OFF)
			#endif
			{
				g_tx_timer_tick_500ms = tx_timeout_secs[g_eeprom.config.setting.tx_timeout] * 2;
			}

			if (g_eeprom.config.setting.backlight_on_tx_rx == 1 || g_eeprom.config.setting.backlight_on_tx_rx == 3)
				BACKLIGHT_turn_on(backlight_tx_rx_time_secs);

			if (g_eeprom.config.setting.dual_watch != DUAL_WATCH_OFF)
			{	// dual-RX is enabled
				g_dual_watch_tick_10ms = dual_watch_delay_after_tx_10ms;
				if (g_dual_watch_tick_10ms < (g_eeprom.config.setting.scan_hold_time * 50))
					g_dual_watch_tick_10ms = g_eeprom.config.setting.scan_hold_time * 50;
			}

			#ifdef ENABLE_MDC1200
				BK4819_enable_mdc1200_rx(false);
			#endif

			// if DTMF is enabled when TX'ing, it changes the TX audio filtering ! .. 1of11
			// so MAKE SURE that DTMF is disabled - until needed
			BK4819_DisableDTMF();

			// clear the DTMF RX buffer
			#ifdef ENABLE_DTMF_CALLING
				DTMF_clear_RX();
			#endif

			#ifdef ENABLE_DTMF_LIVE_DECODER
				// clear the DTMF RX live decoder buffer
				g_dtmf_rx_live_timeout = 0;
				memset(g_dtmf_rx_live, 0, sizeof(g_dtmf_rx_live));
			#endif

			#ifdef ENABLE_FMRADIO
				// disable the FM radio
				if (g_fm_radio_mode)
					BK1080_Init(0, false);
			#endif

			g_update_status = true;

			GUI_DisplayScreen();

			BK4819_set_scrambler(0);

			RADIO_enableTX(false);

			#if defined(ENABLE_UART) && defined(ENABLE_UART_DEBUG)
//				UART_printf("function tx %u %s\r\n", g_dtmf_reply_state, g_dtmf_string);
			#endif

			#if defined(ENABLE_ALARM) || (ENABLE_TX_TONE_HZ > 0)
				if (g_alarm_state != ALARM_STATE_OFF)
				{
					#if (ENABLE_TX_TONE_HZ > 0)
						if (g_alarm_state == ALARM_STATE_TX_TONE)
							BK4819_tx_tone(true, ENABLE_TX_TONE_HZ, 28);
					#endif
					#ifdef ENABLE_ALARM
						if (g_alarm_state == ALARM_STATE_TX_ALARM)
							BK4819_tx_tone(true, 500, 28);
					#endif

					SYSTEM_DelayMs(2);

					GPIO_SetBit(&GPIOC->DATA, GPIOC_PIN_SPEAKER);

					#ifdef ENABLE_ALARM
						g_alarm_tone_counter_10ms = 0;
					#endif

					#if defined(ENABLE_UART) && defined(ENABLE_UART_DEBUG)
//						UART_printf("tx tone %u\n", ENABLE_TX_TONE_HZ);
					#endif

					break;
				}
				else
			#endif
				if (!DTMF_Reply())
				{
				#ifdef ENABLE_MDC1200
					if (g_current_vfo->channel.mdc1200_mode == MDC1200_MODE_BOT || g_current_vfo->channel.mdc1200_mode == MDC1200_MODE_BOTH)
					{
						#ifdef ENABLE_MDC1200_SIDE_BEEP
//							BK4819_start_tone(880, 10, true, true);
//							SYSTEM_DelayMs(120);
//							BK4819_stop_tones(true);
						#endif
						SYSTEM_DelayMs(30);
	
						BK4819_send_MDC1200(MDC1200_OP_CODE_PTT_ID, 0x80, g_eeprom.config.setting.mdc1200_id, true);
	
						#ifdef ENABLE_MDC1200_SIDE_BEEP
							BK4819_start_tone(880, 10, true, true);
							SYSTEM_DelayMs(120);
							BK4819_stop_tones(true);
						#endif
					}
					else
				#endif
					if (g_current_vfo->channel.dtmf_ptt_id_tx_mode == PTT_ID_TONE_BURST)
					{
						#if (ENABLE_TX_TONE_HZ > 0)
							BK4819_start_tone(ENABLE_TX_TONE_HZ, 28, true, false);
						#else
							BK4819_start_tone(1750, 28, true, false);
						#endif
						SYSTEM_DelayMs(TONE_1750_MS);
						BK4819_stop_tones(true);
					}
					else
					if (g_current_vfo->channel.dtmf_ptt_id_tx_mode == PTT_ID_APOLLO)
					{
						BK4819_start_tone(APOLLO_TONE1_HZ, 28, true, false);
						SYSTEM_DelayMs(APOLLO_TONE_MS);
						BK4819_stop_tones(true);
					}
				}

			if (g_eeprom.config.setting.enable_scrambler)
				BK4819_set_scrambler(g_current_vfo->channel.scrambler);

			// 1of11 .. TEST ONLY
//			if (g_current_vfo->p_tx->code_type == CODE_TYPE_NONE)
//			{
//				const uint16_t reg = BK4819_read_reg(0x2B);
//				#if 0
//					BK4819_write_reg(0x2B, reg | (1u << 1));               // disable TX LPF
//					BK4819_write_reg(0x2B, reg | (1u << 2));               // disable TX HPF
//					BK4819_write_reg(0x2B, reg | (1u << 2) | (1u << 1));   // disable TX LPF & HPF
//				#else
					// TX 300Hz LPF
					//BK4819_write_reg(0x44, 0x935A);  // -3dB
					//BK4819_write_reg(0x45, 0x2EFF);  //
					//BK4819_write_reg(0x44, 0x920B);  // -2dB
					//BK4819_write_reg(0x45, 0x3010);  //
					//BK4819_write_reg(0x44, 0x91c1);  // -1dB
					//BK4819_write_reg(0x45, 0x3040);  //
					//BK4819_write_reg(0x44, 0x9009);  //  0dB default
					//BK4819_write_reg(0x45, 0x31A9);  //
					//BK4819_write_reg(0x44, 0x8F90);  // +1dB
					//BK4819_write_reg(0x45, 0x31F3);  //
					//BK4819_write_reg(0x44, 0x8F46);  // +2dB
					//BK4819_write_reg(0x45, 0x31E7);  //
					//BK4819_write_reg(0x44, 0x8ED8);  // +3dB
					//BK4819_write_reg(0x45, 0x3232);  //
//					  BK4819_write_reg(0x44, 0x8D8F);  // +4dB
//					  BK4819_write_reg(0x45, 0x3359);  //
//				#endif

					// TX 3kHz HPF
					//BK4819_write_reg(0x74, 64002);  // -1dB
					//BK4819_write_reg(0x74, 62731);  //  0dB default
					//BK4819_write_reg(0x74, 58908);  // +1dB
					//BK4819_write_reg(0x74, 57122);  // +2dB
					//BK4819_write_reg(0x74, 54317);  // +3dB
//					  BK4819_write_reg(0x74, 52277);  // +4dB
//				#endif
//			}
//			else
//			{
//				BK4819_write_reg(0x2B, BK4819_read_reg(0x2B) & ~(1u << 2));   // enable the 300Hz TX HPF
//			}
//			break;
	}

	g_power_save_pause_tick_10ms = power_save_pause_10ms;
	g_power_save_pause_done      = false;

	#ifdef ENABLE_FMRADIO
		g_fm_restore_tick_10ms = 0;
	#endif

	g_update_status = true;
}