cliclick.m

/**
 * Copyright (c) 2007-2018, Carsten Blüm <carsten@bluem.net>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * - Redistributions of source code must retain the above copyright notice, this
 *   list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright notice, this
 *   list of conditions and the following disclaimer in the documentation and/or
 *   other materials provided with the distribution.
 * - Neither the name of Carsten Blüm nor the names of his contributors may be
 *   used to endorse or promote products derived from this software without specific
 *   prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <stdlib.h>
#include <unistd.h>
#include <stdio.h>
#include <time.h>
#import <Cocoa/Cocoa.h>
#import "ActionExecutor.h"
#import "MoveAction.h"
#import "OutputHandler.h"
#import "ExecutionOptions.h"

void error(void);
void help(void);

NSArray* parseCommandsFile(NSString *filepath);

int main (int argc, const char * argv[]) {

    NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];

    struct ExecutionOptions executionOptions;
    executionOptions.easing = 0;
    executionOptions.waitTime = 0;
    executionOptions.mode = MODE_REGULAR;
    NSArray *modeOptionArg;
    NSString *verbosityOutputDestination = nil;
    NSString *filepath = nil;
    NSString *commandOutputDestination = nil;
    NSArray *actions;
    CGPoint initialMousePosition;
    BOOL restoreOption = NO;
    int optchar;

    while ((optchar = getopt(argc, (char * const *)argv, "horVne:f:d:m:w:")) != -1) {
        switch(optchar) {
            case 'h':
                help();
                [pool release];
                return EXIT_SUCCESS;
            case 'V':
                printf("%s\n", [[NSString stringWithFormat:@"cliclick %@, %@", VERSION, RELEASEDATE] UTF8String]);
                [pool release];
                return EXIT_SUCCESS;
            case 'n':
                [[NSWorkspace sharedWorkspace] openURL:[NSURL URLWithString:DONATIONS_URL]];
                [pool release];
                return EXIT_SUCCESS;
            case 'o':
                [[NSWorkspace sharedWorkspace] openURL:[NSURL URLWithString:HISTORY_URL]];
                [pool release];
                return EXIT_SUCCESS;
            case 'm':
                modeOptionArg = [[NSString stringWithCString:optarg encoding:NSASCIIStringEncoding] componentsSeparatedByString:@":"];
                if ([[modeOptionArg objectAtIndex:0] isEqualToString:@"verbose"]) {
                    executionOptions.mode = MODE_VERBOSE;
                } else if ([[modeOptionArg objectAtIndex:0] isEqualToString:@"test"]) {
                    executionOptions.mode = MODE_TEST;
                } else {
                    fprintf(stderr, "Only “verbose” or “test” are valid values for the -m argument\n");
                    [pool release];
                    return EXIT_FAILURE;
                }
                if ([modeOptionArg count] > 1 && [modeOptionArg objectAtIndex:1]) {
                    verbosityOutputDestination = [modeOptionArg objectAtIndex:1];
                }
                break;
            case 'e':
                executionOptions.easing = atoi(optarg) > 0 ? atoi(optarg) : 0;
                break;
            case 'f':
                filepath = [NSString stringWithCString:optarg encoding:NSASCIIStringEncoding];
                break;
            case 'd':
                commandOutputDestination = [NSString stringWithCString:optarg encoding:NSASCIIStringEncoding];
                break;
            case 'r':
                restoreOption = YES;
                break;
            case 'w':
                executionOptions.waitTime = atoi(optarg) > 0 ? atoi(optarg) : 0;
                break;
            default:
                [pool release];
                return EXIT_FAILURE;
        }
    }

    @try {
        executionOptions.commandOutputHandler = [[OutputHandler alloc] initWithTarget:commandOutputDestination];
        executionOptions.verbosityOutputHandler = [[OutputHandler alloc] initWithTarget:verbosityOutputDestination];
    }
    @catch (NSException *e) {
        fprintf(stderr, "%s\n", [[e reason] UTF8String]);
        [pool release];
        return EXIT_FAILURE;
    }

    if (restoreOption) {
        CGEventRef ourEvent = CGEventCreate(NULL);
        initialMousePosition = CGEventGetLocation(ourEvent);
    }

    if (optind == argc && !filepath) {
        error();
        [pool release];
        return EXIT_FAILURE;
    }

    if (executionOptions.mode == MODE_TEST) {
        [executionOptions.verbosityOutputHandler write:@"Running in test mode. These command(s) would be executed:"];
    }

    if (filepath) {
        NSFileManager *fm = [NSFileManager defaultManager];
        if ([filepath isEqualToString:@""]) {
            fprintf(stderr, "Option -f expects a path: -f /path/to/the/file\n");
            [pool release];
            return EXIT_FAILURE;
        }
        if (![filepath isEqualToString:@"-"] && ![fm fileExistsAtPath:filepath]) {
            fprintf(stderr, "There is no file at %s\n", [filepath UTF8String]);
            [pool release];
            return EXIT_FAILURE;
        }
        actions = parseCommandsFile(filepath);
    } else {
        NSArray *arguments = [[NSProcessInfo processInfo] arguments];
        actions = [arguments subarrayWithRange:NSMakeRange(optind, argc - optind)];
    }

    @try {
        [ActionExecutor executeActions:actions withOptions:executionOptions];
    }
    @catch (NSException *e) {
        fprintf(stderr, "%s\n", [[e reason] UTF8String]);
        [pool release];
        return EXIT_FAILURE;
    }

    if (restoreOption) {
        NSString *positionString = [NSString stringWithFormat:@"%d,%d", (int)initialMousePosition.x, (int)initialMousePosition.y];
        id moveAction = [[MoveAction alloc] init];
        [moveAction performActionWithData:positionString
                              withOptions:executionOptions];
        [moveAction release];
    }

    [pool release];
    return EXIT_SUCCESS;
}

NSArray* parseCommandsFile(NSString *filepath) {
    NSMutableArray *commands = [[NSMutableArray alloc] initWithCapacity:32];
    NSArray *lines;

    if ([filepath isEqualToString:@"-"]) {
        // stdin
        NSData *stdinData = [[NSFileHandle fileHandleWithStandardInput] readDataToEndOfFile];
        NSString *configString = [[NSString alloc] initWithData:stdinData encoding:NSUTF8StringEncoding];
        lines = [configString componentsSeparatedByCharactersInSet:[NSCharacterSet newlineCharacterSet]];
        [configString release];
    } else {
        // File
        NSString *fileContents = [NSString stringWithContentsOfFile:filepath
                                                           encoding:NSUTF8StringEncoding
                                                              error:nil];
        lines = [fileContents componentsSeparatedByString:@"\n"];
    }

    NSUInteger i, count = [lines count];
    for (i = 0; i < count; i++) {
        NSString *command = [[lines objectAtIndex:i] stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceCharacterSet]];
        if ([command isEqualToString:@""]) {
            continue;
        }
        if ([[command substringToIndex:1] isEqualToString:@"#"]) {
            continue;
        }
        [commands addObject:command];
    }

    return [commands autorelease];
}

void error() {
    fprintf(stderr, "You did not pass any commands as argument to cliclick.\n");
    fprintf(stderr, "Call cliclick with option -h to see usage instructions.\n");
}

void help() {

    NSArray *actionClasses = [ActionExecutor actionClasses];
    NSUInteger i, count = [actionClasses count];

    NSString *help = @"\ncliclick (short for “Command Line Interface Click”) is a tool for "
    "executing mouse- and keyboard-related actions from the shell/Terminal\n"
    "\n"
    "USAGE\n"
    "  cliclick [-r] [-m <mode>] [-d <target>] [-e <num>] [-f <file>] [-w <num>] command1 [command2]\n"
    "\n"
    "OPTIONS\n"
    "  -r          Restore initial mouse location when finished\n"
    "  -m <mode>   The mode can be either “verbose” (cliclick will print a\n"
    "              description of each action to stdout just before it is\n"
    "              performed) or “test” (cliclick will only print the\n"
    "              description, but not perform the action)\n"
    "  -d <target> Specify the target when using the “p” (“print”) command.\n"
    "              Possible values are: stdout, stderr, clipboard or the path \n"
    "              to a file (which will be overwritten if it exists).\n"
    "              By default (if option not given), stdout is used for printing\n"
    "  -e <easing> Set an easing factor for mouse movements. The higher this\n"
    "              value is (default: 0), the more will mouse movements seem\n"
    "              “natural” or “human-like”, which also implies: will be slower.\n"
    "              If this option is used, the actual speed will also depend\n"
    "              on the distance between the start and the end position, i.e.\n"
    "              the time needed for moving will be higher if the distance\n"
    "              is larger.\n"
    "  -f <file>   Instead of passing commands as arguments, you may instead\n"
    "              specify a file from which cliclick will read the commands\n"
    "              (or stdin, when - is given as filename).\n"
    "              Each line in the file is expected to contain a command\n"
    "              in the same format/syntax as commands given as arguments\n"
    "              at the shell. Additionally, lines starting with the hash\n"
    "              character # are regarded as comments, i.e.: ignored. Leading\n"
    "              and trailing whitespace is ignored, too.\n"
    "  -w <num>    Wait the given number of milliseconds after each event.\n"
    "              If you find that you use the “wait” command too often,\n"
    "              using -w could make things easier. Please note that “wait”\n"
    "              is not affected by -w. This means that invoking\n"
    "              “cliclick -w 200 wait:500” will wait for 700 milliseconds.\n"
    "              The default (and minimum) value for -w is 20.\n"
    "  -V          Show cliclick version number and release date\n"
    "  -o          Open version history in a browser\n"
    "  -n          Send a donation\n"
    "\n"
    "COMMANDS\n"
    "To use cliclick, you pass an arbitrary number of commands as arguments. A command consists of a "
    "command identifier (a string that tells cliclick what kind of action to perform) and usually one "
    "or more arguments to the command, which are separated from the command identifier with a colon. "
    "Example: “c:123,456” is the command for clicking (the “c” is the command identifier for clicking) "
    "at the position with x coordinate 123 and y coordinate 456. See below for a list of all commands "
    "and the arguments they expect.\nWhenever a command expects a pair of coordinates, you may provide "
    "relative values by prefixing the number with “+” or “-”. For example, “m:+50,+0” will move the mouse 50 "
    "pixels to the right. Of course, relative and absolute values can be mixed, and negative values "
    "are possible, so “c:100,-20” would be perfectly valid. (If you need to specify absolute negative "
    "values in case you have a setup with a second display arranged to the left of your main display, "
    "prefix the number with “=”, for instance “c:100,=-200”.)\n\n"
    "LIST OF COMMANDS\n\n";

    printf("%s", [help UTF8String]);

    for (i = 0; i < count; i++) {
        NSString *className = [actionClasses objectAtIndex:i];
        printf("%s\n\n", [[NSClassFromString(className) commandDescription] UTF8String]);
    }

    NSString *author = [NSString stringWithFormat:@"Version %@, released %@\n"
                        "Author: Carsten Blüm, <carsten@bluem.net>\n"
                        "List of contributors: https://github.com/BlueM/cliclick/graphs/contributors\n"
                        "Website: https://www.bluem.net/jump/cliclick/\n\n",
                        VERSION,
                        RELEASEDATE];
    printf("%s", [author UTF8String]);
}