From 372e88b16f70299cefaf3c45e842082503785e2b Mon Sep 17 00:00:00 2001 From: Just Call Me Koko Date: Sun, 15 Dec 2024 17:15:53 -0500 Subject: [PATCH] Add v7 to build workflow --- .github/workflows/build_push.yml | 63 +++++++ User_Setup_Select.h | 38 +++- User_Setup_dual_nrf24.h | 315 +++++++++++++++++++++++++++++++ esp32_marauder/configs.h | 4 +- 4 files changed, 413 insertions(+), 7 deletions(-) create mode 100644 User_Setup_dual_nrf24.h diff --git a/.github/workflows/build_push.yml b/.github/workflows/build_push.yml index 9e745fc1a..17a0526e4 100644 --- a/.github/workflows/build_push.yml +++ b/.github/workflows/build_push.yml @@ -176,6 +176,7 @@ jobs: cp User_Setup_og_marauder.h CustomTFT_eSPI/ cp User_Setup_marauder_m5stickc.h CustomTFT_eSPI/ cp User_Setup_marauder_rev_feather.h CustomTFT_eSPI/ + cp User_Setup_dual_nrf24.h CustomTFT_eSPI/ pwd ls -la ls -la CustomTFT_eSPI @@ -225,6 +226,7 @@ jobs: sed -i 's/^ #define MARAUDER_V4/ \/\/#define MARAUDER_V4/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6/ \/\/#define MARAUDER_V6/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6_1/ \/\/#define MARAUDER_V6_1/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_V7/ \/\/#define MARAUDER_V7/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_KIT/ \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h sed -i 's/^ #define GENERIC_ESP32/ \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h sed -i 's/^ \/\/#define MARAUDER_FLIPPER/ #define MARAUDER_FLIPPER/' esp32_marauder/configs.h @@ -269,6 +271,7 @@ jobs: sed -i 's/^ \/\/#define MARAUDER_V4/ #define MARAUDER_V4/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6/ \/\/#define MARAUDER_V6/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6_1/ \/\/#define MARAUDER_V6_1/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_V7/ \/\/#define MARAUDER_V7/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_KIT/ \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h sed -i 's/^ #define GENERIC_ESP32/ \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h @@ -298,6 +301,7 @@ jobs: sed -i 's/^ #define MARAUDER_V4/ \/\/#define MARAUDER_V4/' esp32_marauder/configs.h sed -i 's/^ \/\/#define MARAUDER_V6/ #define MARAUDER_V6/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6_1/ \/\/#define MARAUDER_V6_1/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_V7/ \/\/#define MARAUDER_V7/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_KIT/ \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h sed -i 's/^ #define GENERIC_ESP32/ \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h @@ -341,6 +345,7 @@ jobs: sed -i 's/^ #define MARAUDER_V4/ \/\/#define MARAUDER_V4/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6/ \/\/#define MARAUDER_V6/' esp32_marauder/configs.h sed -i 's/^ \/\/#define MARAUDER_V6_1/ #define MARAUDER_V6_1/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_V7/ \/\/#define MARAUDER_V7/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_KIT/ \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h sed -i 's/^ #define GENERIC_ESP32/ \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h @@ -369,6 +374,7 @@ jobs: sed -i 's/^ #define MARAUDER_V4/ \/\/#define MARAUDER_V4/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6/ \/\/#define MARAUDER_V6/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6_1/ \/\/#define MARAUDER_V6_1/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_V7/ \/\/#define MARAUDER_V7/' esp32_marauder/configs.h sed -i 's/^ \/\/#define MARAUDER_KIT/ #define MARAUDER_KIT/' esp32_marauder/configs.h sed -i 's/^ #define GENERIC_ESP32/ \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h @@ -397,6 +403,7 @@ jobs: sed -i 's/^ #define MARAUDER_V4/ \/\/#define MARAUDER_V4/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6/ \/\/#define MARAUDER_V6/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6_1/ \/\/#define MARAUDER_V6_1/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_V7/ \/\/#define MARAUDER_V7/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_KIT/ \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h sed -i 's/^ #define GENERIC_ESP32/ \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h @@ -423,6 +430,7 @@ jobs: sed -i 's/^ #define MARAUDER_V4/ \/\/#define MARAUDER_V4/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6/ \/\/#define MARAUDER_V6/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6_1/ \/\/#define MARAUDER_V6_1/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_V7/ \/\/#define MARAUDER_V7/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_KIT/ \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h sed -i 's/^ #define GENERIC_ESP32/ \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h @@ -449,6 +457,7 @@ jobs: sed -i 's/^ #define MARAUDER_V4/ \/\/#define MARAUDER_V4/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6/ \/\/#define MARAUDER_V6/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6_1/ \/\/#define MARAUDER_V6_1/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_V7/ \/\/#define MARAUDER_V7/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_KIT/ \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h sed -i 's/^ #define GENERIC_ESP32/ \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h @@ -479,6 +488,7 @@ jobs: sed -i 's/^ #define MARAUDER_V4/ \/\/#define MARAUDER_V4/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6/ \/\/#define MARAUDER_V6/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6_1/ \/\/#define MARAUDER_V6_1/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_V7/ \/\/#define MARAUDER_V7/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_KIT/ \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h sed -i 's/^ #define GENERIC_ESP32/ \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h @@ -511,6 +521,7 @@ jobs: sed -i 's/^ #define MARAUDER_V4/ \/\/#define MARAUDER_V4/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6/ \/\/#define MARAUDER_V6/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_V6_1/ \/\/#define MARAUDER_V6_1/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_V7/ \/\/#define MARAUDER_V7/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_KIT/ \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h sed -i 's/^ #define GENERIC_ESP32/ \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h @@ -530,6 +541,39 @@ jobs: - name: Rename Marauder Marauder Rev Feather run: | mv ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.rev_feather.bin + + - name: Configure TFT_eSPI and configs.h for Marauder v7 + run: | + pwd + find /home/runner/ -name "*TFT_eSPI*" + sed -i 's/^\/\/#include /#include /' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h + sed -i 's/^#include /\/\/#include /' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h + sed -i 's/^#include /\/\/#include /' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h + sed -i 's/^ #define MARAUDER_REV_FEATHER/ \/\/#define MARAUDER_REV_FEATHER/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_MINI/ \/\/#define MARAUDER_MINI/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_V4/ \/\/#define MARAUDER_V4/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_V6/ \/\/#define MARAUDER_V6/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_V6_1/ \/\/#define MARAUDER_V6_1/' esp32_marauder/configs.h + sed -i 's/^ \/\/#define MARAUDER_V7/ #define MARAUDER_V7/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_KIT/ \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h + sed -i 's/^ #define GENERIC_ESP32/ \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h + sed -i 's/^ #define ESP32_LDDB/ \/\/#define ESP32_LDDB/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_DEV_BOARD_PRO/ \/\/#define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_M5STICKC/ \/\/#define MARAUDER_M5STICKC/' esp32_marauder/configs.h + + - name: Build Marauder for Marauder v7 + uses: ArminJo/arduino-test-compile@v3.2.1 + with: + sketch-names: esp32_marauder.ino + arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs + extra-arduino-cli-args: "--warnings none" + arduino-platform: esp32:esp32@2.0.11 + platform-url: https://github.com/espressif/arduino-esp32/releases/download/2.0.11/package_esp32_dev_index.json + + - name: Rename Marauder Marauder v7 + run: | + mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.marauder_v7.bin - name: Display finished bins run: | @@ -612,6 +656,13 @@ jobs: path: ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.rev_feather.bin retention-days: 5 + - name: 'Upload Marauder v7 Artifact' + uses: actions/upload-artifact@v3 + with: + name: esp32_marauder.marauder_v7.bin + path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.marauder_v7.bin + retention-days: 5 + - name: Create Release id: create_release uses: actions/create-release@v1 @@ -755,3 +806,15 @@ jobs: asset_name: esp32_marauder.rev_feather.bin asset_content_type: application/bin if: github.event_name != 'pull_request' + + - name: Upload Marauder v7 Asset + id: upload-marauder-v7-release-asset + uses: actions/upload-release-asset@v1 + env: + GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} + with: + upload_url: ${{ steps.create_release.outputs.upload_url }} + asset_path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.marauder_v7.bin + asset_name: esp32_marauder.marauder_v7.bin + asset_content_type: application/bin + if: github.event_name != 'pull_request' diff --git a/User_Setup_Select.h b/User_Setup_Select.h index 82c61d38a..74c42f937 100644 --- a/User_Setup_Select.h +++ b/User_Setup_Select.h @@ -21,10 +21,14 @@ //#include // Default setup is root library folder -#include +//#include +//#include //#include -//#include //#include +//#include +//#include +#include +//#include //#include // Setup file configured for my ILI9341 //#include // Setup file configured for my ST7735 @@ -51,7 +55,8 @@ //#include // Setup file for ESP8266 and ILI9488 SPI bus TFT //#include // Setup file for ESP32 and ILI9488 SPI bus TFT -//#include // Setup file for ESP32 and TTGO T4 (BTC) ILI9341 SPI bus TFT +//#include // Setup file for ESP32 and TTGO T4 version 1.2 +//#include // Setup file for ESP32 and TTGO T4 version 1.3 //#include // Setup file for ESP32 and TTGO TM ST7789 SPI bus TFT //#include // Setup file configured for ST7789 240 x 240 //#include // Setup file for ESP32 and TTGO T-Display ST7789V SPI bus TFT @@ -63,9 +68,20 @@ //#include // Setup for Nucleo board //#include // Setup for Nucleo board and parallel display //#include // Setup for Nucleo board and parallel display -//#include // Setup for "Blue Pill" +//#include // Setup for "Blue/Black Pill" + +//#include // Setup for Nucleo board + +//#include // Setup for Nucleo board and parallel display +//#include // Setup for STM32 port A parallel display + +//#include // Setup file configured for ESP32 and RPi TFT with touch //#include // Setup file configured for my ST7735S 80x160 +//#include // Setup file for ESP32 and TTGO T-CameraPlus ST7789 SPI bus TFT 240x240 +//#include // Setup file for ESP32 and TTGO T-Watch ST7789 SPI bus TFT 240x240 + +//#include // Setup file for ESP32 and SSD1963 TFT display //#include // Setup file for ESP8266 and ST7789 135 x 240 TFT @@ -149,8 +165,20 @@ #elif defined (RM68140_DRIVER) #include "TFT_Drivers/RM68140_Defines.h" #define TFT_DRIVER 0x6814 +#elif defined (SSD1963_480_DRIVER) + #include "TFT_Drivers/SSD1963_Defines.h" + #define TFT_DRIVER 0x1963 +#elif defined (SSD1963_800_DRIVER) + #include "TFT_Drivers/SSD1963_Defines.h" + #define TFT_DRIVER 0x1963 +#elif defined (SSD1963_800ALT_DRIVER) + #include "TFT_Drivers/SSD1963_Defines.h" + #define TFT_DRIVER 0x1963 +#elif defined (SSD1963_800BD_DRIVER) + #include "TFT_Drivers/SSD1963_Defines.h" + #define TFT_DRIVER 0x1963 // <<<<<<<<<<<<<<<<<<<<<<<< ADD NEW DRIVER HERE - // XYZZY_init.h and XYZZY_rotation.h must also be added in TFT_eSPI.c + // XYZZY_init.h and XYZZY_rotation.h must also be added in TFT_eSPI.cpp #elif defined (XYZZY_DRIVER) #include "TFT_Drivers/XYZZY_Defines.h" #define TFT_DRIVER 0x0000 diff --git a/User_Setup_dual_nrf24.h b/User_Setup_dual_nrf24.h new file mode 100644 index 000000000..91045f9ab --- /dev/null +++ b/User_Setup_dual_nrf24.h @@ -0,0 +1,315 @@ +// USER DEFINED SETTINGS +// Set driver type, fonts to be loaded, pins used and SPI control method etc +// +// See the User_Setup_Select.h file if you wish to be able to define multiple +// setups and then easily select which setup file is used by the compiler. +// +// If this file is edited correctly then all the library example sketches should +// run without the need to make any more changes for a particular hardware setup! +// Note that some sketches are designed for a particular TFT pixel width/height + + +// ################################################################################## +// +// Section 1. Call up the right driver file and any options for it +// +// ################################################################################## + +// Display type - only define if RPi display +//#define RPI_DRIVER + +// Only define one driver, the other ones must be commented out +#define ILI9341_DRIVER // OG Marauder +//#define ST7735_DRIVER // Marauder Mini // Define additional parameters below for this display +//#define ILI9163_DRIVER // Define additional parameters below for this display +//#define S6D02A1_DRIVER +//#define RPI_ILI9486_DRIVER // 20MHz maximum SPI +//#define HX8357D_DRIVER +//#define ILI9481_DRIVER +//#define ILI9486_DRIVER +//#define ILI9488_DRIVER // WARNING: Do not connect ILI9488 display SDO to MISO if other devices share the SPI bus (TFT SDO does NOT tristate when CS is high) +//#define ST7789_DRIVER // Full configuration option, define additional parameters below for this display +//#define ST7789_2_DRIVER // Minimal configuration option, define additional parameters below for this display +//#define R61581_DRIVER +//#define RM68140_DRIVER +//#define ST7796_DRIVER + +// Some displays support SPI reads via the MISO pin, other displays have a single +// bi-directional SDA pin and the library will try to read this via the MOSI line. +// To use the SDA line for reading data from the TFT uncomment the following line: + +// #define TFT_SDA_READ // This option is for ESP32 ONLY, tested with ST7789 display only + +// For ST7789 and ILI9341 ONLY, define the colour order IF the blue and red are swapped on your display +// Try ONE option at a time to find the correct colour order for your display + +// #define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue +// #define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red + +// For M5Stack ESP32 module with integrated ILI9341 display ONLY, remove // in line below + +// #define M5STACK + +// For ST7789, ST7735 and ILI9163 ONLY, define the pixel width and height in portrait orientation +// #define TFT_WIDTH 80 +// #define TFT_WIDTH 128 // Marauder Mini +// #define TFT_WIDTH 240 // ST7789 240 x 240 and 240 x 320 +// #define TFT_HEIGHT 160 +// #define TFT_HEIGHT 128 // Marauder Mini +// #define TFT_HEIGHT 240 // ST7789 240 x 240 +// #define TFT_HEIGHT 320 // ST7789 240 x 320 + +// For ST7735 ONLY, define the type of display, originally this was based on the +// colour of the tab on the screen protector film but this is not always true, so try +// out the different options below if the screen does not display graphics correctly, +// e.g. colours wrong, mirror images, or tray pixels at the edges. +// Comment out ALL BUT ONE of these options for a ST7735 display driver, save this +// this User_Setup file, then rebuild and upload the sketch to the board again: + +// #define ST7735_INITB +// #define ST7735_GREENTAB +// #define ST7735_GREENTAB2 +// #define ST7735_GREENTAB3 +// #define ST7735_GREENTAB128 // For 128 x 128 display +// #define ST7735_GREENTAB160x80 // For 160 x 80 display (BGR, inverted, 26 offset) +// #define ST7735_REDTAB +// #define ST7735_BLACKTAB +// #define ST7735_REDTAB160x80 // For 160 x 80 display with 24 pixel offset + +// If colours are inverted (white shows as black) then uncomment one of the next +// 2 lines try both options, one of the options should correct the inversion. + +// #define TFT_INVERSION_ON +// #define TFT_INVERSION_OFF + +// If a backlight control signal is available then define the TFT_BL pin in Section 2 +// below. The backlight will be turned ON when tft.begin() is called, but the library +// needs to know if the LEDs are ON with the pin HIGH or LOW. If the LEDs are to be +// driven with a PWM signal or turned OFF/ON then this must be handled by the user +// sketch. e.g. with digitalWrite(TFT_BL, LOW); + +// #define TFT_BACKLIGHT_ON LOW // HIGH or LOW are options + +// ################################################################################## +// +// Section 2. Define the pins that are used to interface with the display here +// +// ################################################################################## + +// We must use hardware SPI, a minimum of 3 GPIO pins is needed. +// Typical setup for ESP8266 NodeMCU ESP-12 is : +// +// Display SDO/MISO to NodeMCU pin D6 (or leave disconnected if not reading TFT) +// Display LED to NodeMCU pin VIN (or 5V, see below) +// Display SCK to NodeMCU pin D5 +// Display SDI/MOSI to NodeMCU pin D7 +// Display DC (RS/AO)to NodeMCU pin D3 +// Display RESET to NodeMCU pin D4 (or RST, see below) +// Display CS to NodeMCU pin D8 (or GND, see below) +// Display GND to NodeMCU pin GND (0V) +// Display VCC to NodeMCU 5V or 3.3V +// +// The TFT RESET pin can be connected to the NodeMCU RST pin or 3.3V to free up a control pin +// +// The DC (Data Command) pin may be labeled AO or RS (Register Select) +// +// With some displays such as the ILI9341 the TFT CS pin can be connected to GND if no more +// SPI devices (e.g. an SD Card) are connected, in this case comment out the #define TFT_CS +// line below so it is NOT defined. Other displays such at the ST7735 require the TFT CS pin +// to be toggled during setup, so in these cases the TFT_CS line must be defined and connected. +// +// The NodeMCU D0 pin can be used for RST +// +// +// Note: only some versions of the NodeMCU provide the USB 5V on the VIN pin +// If 5V is not available at a pin you can use 3.3V but backlight brightness +// will be lower. + + +// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP8266 SETUP ###### + +// For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation +//#define TFT_CS PIN_D8 // Chip select control pin D8 +//#define TFT_DC PIN_D3 // Data Command control pin +//#define TFT_RST PIN_D4 // Reset pin (could connect to NodeMCU RST, see next line) +//#define TFT_RST -1 // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V + +//#define TFT_BL PIN_D1 // LED back-light (only for ST7789 with backlight control pin) + +//#define TOUCH_CS PIN_D2 // Chip select pin (T_CS) of touch screen + +//#define TFT_WR PIN_D2 // Write strobe for modified Raspberry Pi TFT only + + +// ###### FOR ESP8266 OVERLAP MODE EDIT THE PIN NUMBERS IN THE FOLLOWING LINES ###### + +// Overlap mode shares the ESP8266 FLASH SPI bus with the TFT so has a performance impact +// but saves pins for other functions. It is best not to connect MISO as some displays +// do not tristate that line wjen chip select is high! +// On NodeMCU 1.0 SD0=MISO, SD1=MOSI, CLK=SCLK to connect to TFT in overlap mode +// On NodeMCU V3 S0 =MISO, S1 =MOSI, S2 =SCLK +// In ESP8266 overlap mode the following must be defined + +//#define TFT_SPI_OVERLAP + +// In ESP8266 overlap mode the TFT chip select MUST connect to pin D3 +//#define TFT_CS PIN_D3 +//#define TFT_DC PIN_D5 // Data Command control pin +//#define TFT_RST PIN_D4 // Reset pin (could connect to NodeMCU RST, see next line) +//#define TFT_RST -1 // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V + + +// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP32 SETUP ###### + +// For ESP32 Dev board (only tested with ILI9341 display) +// The hardware SPI can be mapped to any pins + +// Marauder Mini +/* +#define TFT_CS 17 // Chip select control pin D8 +#define TFT_DC 16 // Data Command control pin +#define TFT_RST 5 // Reset pin (could connect to NodeMCU RST, see next line) +//#define TFT_MISO 19 +//#define TFT_MOSI 23 +//#define TFT_SCLK 18 +//#define TFT_BL 32 +*/ + +// ESP32 Marauder +#define TFT_CS 17 // Chip select control pin D8 +#define TFT_DC 26 // Data Command control pin +#define TFT_RST -1 // Reset pin (could connect to NodeMCU RST, see next line) +#define TOUCH_CS -1 +//#define TFT_MISO 16 +#define TFT_MOSI 23 +#define TFT_SCLK 18 +#define TFT_BL 32 + +//#define TOUCH_CS 21 // Chip select pin (T_CS) of touch screen + +///////////////////////////// + +// ESP32 Centauri +/* +#define TFT_MISO 19 +#define TFT_MOSI 23 +#define TFT_SCLK 18 +#define TFT_CS 27 // Chip select control pin +#define TFT_DC 26 // Data Command control pin +#define TFT_RST 5 // Reset pin (could connect to RST pin) +//#define TFT_RST -1 // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST + +#define TFT_BL 32 // LED back-light (only for ST7789 with backlight control pin) + +#define TOUCH_CS 21 // Chip select pin (T_CS) of touch screen +*/ +///////////////////////////// + +//#define TFT_WR 22 // Write strobe for modified Raspberry Pi TFT only + +// For the M5Stack module use these #define lines +//#define TFT_MISO 19 +//#define TFT_MOSI 23 +//#define TFT_SCLK 18 +//#define TFT_CS 14 // Chip select control pin +//#define TFT_DC 27 // Data Command control pin +//#define TFT_RST 33 // Reset pin (could connect to Arduino RESET pin) +//#define TFT_BL 32 // LED back-light (required for M5Stack) + +// ###### EDIT THE PINs BELOW TO SUIT YOUR ESP32 PARALLEL TFT SETUP ###### + +// The library supports 8 bit parallel TFTs with the ESP32, the pin +// selection below is compatible with ESP32 boards in UNO format. +// Wemos D32 boards need to be modified, see diagram in Tools folder. +// Only ILI9481 and ILI9341 based displays have been tested! + +// Parallel bus is only supported on ESP32 +// Uncomment line below to use ESP32 Parallel interface instead of SPI + +//#define ESP32_PARALLEL + +// The ESP32 and TFT the pins used for testing are: +//#define TFT_CS 33 // Chip select control pin (library pulls permanently low +//#define TFT_DC 15 // Data Command control pin - must use a pin in the range 0-31 +//#define TFT_RST 32 // Reset pin, toggles on startup + +//#define TFT_WR 4 // Write strobe control pin - must use a pin in the range 0-31 +//#define TFT_RD 2 // Read strobe control pin + +//#define TFT_D0 12 // Must use pins in the range 0-31 for the data bus +//#define TFT_D1 13 // so a single register write sets/clears all bits. +//#define TFT_D2 26 // Pins can be randomly assigned, this does not affect +//#define TFT_D3 25 // TFT screen update performance. +//#define TFT_D4 17 +//#define TFT_D5 16 +//#define TFT_D6 27 +//#define TFT_D7 14 + + +// ################################################################################## +// +// Section 3. Define the fonts that are to be used here +// +// ################################################################################## + +// Comment out the #defines below with // to stop that font being loaded +// The ESP8366 and ESP32 have plenty of memory so commenting out fonts is not +// normally necessary. If all fonts are loaded the extra FLASH space required is +// about 17Kbytes. To save FLASH space only enable the fonts you need! + +#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH +#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters +#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters +#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm +#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-. +#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. +//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT +#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts + +// Comment out the #define below to stop the SPIFFS filing system and smooth font code being loaded +// this will save ~20kbytes of FLASH +#define SMOOTH_FONT + + +// ################################################################################## +// +// Section 4. Other options +// +// ################################################################################## + +// Define the SPI clock frequency, this affects the graphics rendering speed. Too +// fast and the TFT driver will not keep up and display corruption appears. +// With an ILI9341 display 40MHz works OK, 80MHz sometimes fails +// With a ST7735 display more than 27MHz may not work (spurious pixels and lines) +// With an ILI9163 display 27 MHz works OK. + +// #define SPI_FREQUENCY 1000000 +//#define SPI_FREQUENCY 5000000 +// #define SPI_FREQUENCY 10000000 +// #define SPI_FREQUENCY 20000000 +#define SPI_FREQUENCY 27000000 // Marauder // Actually sets it to 26.67MHz = 80/3 +// #define SPI_FREQUENCY 40000000 +// #define SPI_FREQUENCY 80000000 + +// Optional reduced SPI frequency for reading TFT +#define SPI_READ_FREQUENCY 20000000 + +// The XPT2046 requires a lower SPI clock rate of 2.5MHz so we define that here: +#define SPI_TOUCH_FREQUENCY 2500000 + +// The ESP32 has 2 free SPI ports i.e. VSPI and HSPI, the VSPI is the default. +// If the VSPI port is in use and pins are not accessible (e.g. TTGO T-Beam) +// then uncomment the following line: +//#define USE_HSPI_PORT + +// Comment out the following #define if "SPI Transactions" do not need to be +// supported. When commented out the code size will be smaller and sketches will +// run slightly faster, so leave it commented out unless you need it! + +// Transaction support is needed to work with SD library but not needed with TFT_SdFat +// Transaction support is required if other SPI devices are connected. + +// Transactions are automatically enabled by the library for an ESP32 (to use HAL mutex) +// so changing it here has no effect + +// #define SUPPORT_TRANSACTIONS diff --git a/esp32_marauder/configs.h b/esp32_marauder/configs.h index 17f828a46..a6ade7365 100644 --- a/esp32_marauder/configs.h +++ b/esp32_marauder/configs.h @@ -11,8 +11,8 @@ //#define MARAUDER_MINI //#define MARAUDER_V4 //#define MARAUDER_V6 - #define MARAUDER_V6_1 - //#define MARAUDER_V7 + //#define MARAUDER_V6_1 + #define MARAUDER_V7 //#define MARAUDER_KIT //#define GENERIC_ESP32 //#define MARAUDER_FLIPPER