RPM packages missing from the giso.

[Red86]

Hi,
I've built an iso using a repository that had around 50 RPMs in it. While the iso was built without any warning or error, the image installed on the router has significantly less RPMs than what it should have.

As an example: ncs5500-dpa-3.0.0.8-r7721.CSCwi35880.x86_64.rpm was inside of the repository but I cannot see that installed, when on the router I issue the "show install active summary" on the router I see:

Active Packages: 17
ncs5500-xr-7.7.21 version=7.7.21 [Boot image]
libpci3-3.6.4.p1-r0.r7721.CSCwe49269.xr
ncs5500-mpls-2.1.0.0-r7721
ncs5500-mpls-te-rsvp-3.1.0.0-r7721
ncs5500-ospf-2.0.0.0-r7721
ncs5500-mgbl-3.0.0.0-r7721
ncs5500-mcast-3.0.0.0-r7721
ncs5500-k9sec-3.1.0.0-r7721
ncs5500-infra-5.1.0.6-r7721.CSCwi09344
ncs5500-parser-2.0.0.1-r7721.CSCwf53989
ncs5500-iosxr-fwding-4.0.0.8-r7721.CSCwh79153
ncs5500-ospf-2.0.0.1-r7721.CSCwi08034
ncs5500-bgp-2.0.0.4-r7721.CSCwe14754
ncs5500-dpa-3.0.0.9-r7721.CSCwf98671
ncs5500-dpa-fwding-4.0.0.7-r7721.CSCwf57277
ncs5500-mpls-te-rsvp-3.1.0.1-r7721.CSCwe78378
ncs5500-os-support-4.0.0.2-r7721.CSCwi26163

and in admin:

ncs5500-sysadmin-7.7.21 version=7.7.21 [Boot image]
libpci3-3.6.4.p1-r0.r7721.CSCwe49269.admin
ncs5500-sysadmin-ncs5500-7.7.21.2-r7721.CSCwe59739
libpci3-3.6.4.p1-r0.r7721.CSCwe49269.host

Is the giso script skipping all RPMs not listed or, they're being merged into others? Could you please advise?

Thank you
rpms_packaged_in_giso.txt
gisobuild.log-2024-02-29%3A16%3A55%3A41.log

[NeilKetley]

It looks like ncs5500-dpa-3.0.0.9-r7721.CSCwf98671 is installed, which is a later version of the ncs5500-dpa package and would supersede ncs5500-dpa-3.0.0.8-r7721.CSCwi35880.x86_64.rpm.