[FAB-17460] Move High Throughput sample to test network (#112)

Signed-off-by: NIKHIL E GUPTA <[email protected]>

Co-authored-by: NIKHIL E GUPTA <[email protected]>

high-throughput/README.md

@@ -94,75 +94,56 @@ and assumed to be correct and at minimal risk to either company simply due to Am
 must be verified before approval and admittance to the chain.
 
 ## How
-This sample provides the chaincode and scripts required to run a high-throughput application. For ease of use, it runs on the same network which is brought
-up by `byfn.sh` in the `first-network` folder within `fabric-samples`, albeit with a few small modifications. The instructions to build the network
-and run some invocations are provided below.
+This sample provides the chaincode and scripts required to run a high-throughput application on the Fabric test network.
 
-### Build your network
-1. `cd` into the `first-network` folder within `fabric-samples`, e.g. `cd ~/fabric-samples/first-network`
-2. Open `docker-compose-cli.yaml` in your favorite editor, and edit the following lines:
-  * In the `volumes` section of the `cli` container, edit the second line which refers to the chaincode folder to point to the chaincode folder
-    within the `high-throughput` folder, e.g.
-
-    `./../chaincode/:/opt/gopath/src/github.com/hyperledger/fabric-samples/chaincode` -->
-    `./../high-throughput/chaincode/:/opt/gopath/src/github.com/hyperledger/fabric-samples/chaincode`
-  * Again in the `volumes` section, edit the fourth line which refers to the scripts folder so it points to the scripts folder within the
-    `high-throughput` folder, e.g.
-
-    `./scripts:/opt/gopath/src/github.com/hyperledger/fabric/peer/scripts/` -->
-    `./../high-throughput/scripts/:/opt/gopath/src/github.com/hyperledger/fabric/peer/scripts/`
+### Vendor the chaincode dependencies
+1. Change into the chaincode directory, e.g. `cd ~/fabric-samples/high-throughput/chaincode`
+2. Vendor the Go dependencies by running the following command: `GO111MODULE=on go mod vendor`
+3. The chaincode directory will now contain a `vendor` directory.
 
-  * Finally, comment out the `docker exec cli scripts/script.sh` command from the `byfn.sh` script by placing a `#` before it so that the standard BYFN end to end script doesn't run, e.g.
+### Start the network
 
-    `#  docker exec cli scripts/script.sh $CHANNEL_NAME $CLI_DELAY $CC_SRC_LANGUAGE $CLI_TIMEOUT $VERBOSE`
+You can use the `startFabric.sh` script to create an instance of the Fabric test network with a single channel named `mychannel`. The script then deploys the `high-throughput` chaincode to the channel by installing it on the test network peers and committing the chaincode definition to the channel.
 
-3. We can now bring our network up by typing in `./byfn.sh up -c mychannel`
-4. Open a new terminal window and enter the CLI container using `docker exec -it cli bash`, all operations on the network will happen within
-   this container from now on.
+Change back into the `high-throughput` directory in `fabic-samples`. Start the network and deploy the chaincode by issuing the following command:
+```
+./startFabric.sh
+```
 
-### Vendor the chaincode dependencies
-1. Outside of the CLI container, change into the chaincode directory, e.g. `cd ~/fabric-samples/high-throughput/chaincode`
-2. Vendor the Go dependencies by running the following command: `GO111MODULE=on go mod vendor`
-3. The chaincode directory will now contain a `vendor` directory.
+If successful, you will see messages of the Fabric test network being created and the chaincode being deployed, followed by the execution time of the script:
+```
+Total setup execution time : 141 secs ...
+```
 
-### Install and define the chaincode
-1. Once you're in the CLI container run `cd scripts` to enter the `scripts` folder
-2. Set-up the environment variables by running `source setclienv.sh`
-3. Set-up your channels and anchor peers by running `./channel-setup.sh`
-4. Package and install your chaincode by running `./install-chaincode.sh 1`. The only argument is a number representing the    chaincode version, every time
-   you want to install and upgrade to a new chaincode version simply increment this value by 1 when running the command, e.g. `./install-chaincode.sh 2`
-5. Define your chaincode on the channel by running `./approve-commit-chaincode.sh 1`. The version argument serves the same purpose as in `./install-chaincode.sh 1`
-   and should match the version of the chaincode you just installed. This script also invokes the chaincode `Init` function to start the chaincode container.
-   You can also upgrade the chaincode to a newer version by running `./approve-commit-chaincode.sh 2`.
-6. Your chaincode is now installed and ready to receive invocations
+The `high-throughput` chaincode is now ready to receive invocations.
 
 ### Invoke the chaincode
-All invocations are provided as scripts in `scripts` folder; these are detailed below.
+All invocations are provided as scripts in `scripts` folder. You can use these scripts to create and remove assets that you put on the ledger.
 
 #### Update
-The format for update is: `./update-invoke.sh name value operation` where `name` is the name of the variable to update, `value` is the value to
+The format for update is: `./scripts/update-invoke.sh name value operation` where `name` is the name of the variable to update, `value` is the value to
 add to the variable, and `operation` is either `+` or `-` depending on what type of operation you'd like to add to the variable. In the future,
 multiply/divide operations will be supported (or add them yourself to the chaincode as an exercise!)
 
-Example: `./update-invoke.sh myvar 100 +`
+Example: `./scripts/update-invoke.sh myvar 100 +`
 
 #### Get
 The format for get is: `./get-invoke.sh name` where `name` is the name of the variable to get.
 
-Example: `./get-invoke.sh myvar`
-
-#### Delete
-The format for delete is: `./delete-invoke.sh name` where `name` is the name of the variable to delete.
-
-Example: `./delete-invoke.sh myvar`
+Example: `./scripts/get-invoke.sh myvar`
 
 #### Prune
 Pruning takes all the deltas generated for a variable and combines them all into a single row, deleting all previous rows. This helps cleanup
 the ledger when many updates have been performed.
 
-The format for pruning is: `./prune-invoke.sh name` where `name` is the name of the variable to prune.
+The format for pruning is: `./scripts/prune-invoke.sh name` where `name` is the name of the variable to prune.
+
+Example: `./scripts/prune-invoke.sh myvar`
 
-Example: `./prune-invoke.sh myvar`
+#### Delete
+The format for delete is: `./delete-invoke.sh name` where `name` is the name of the variable to delete.
+
+Example: `./scripts/delete-invoke.sh myvar`
 
 ### Test the Network
 Two scripts are provided to show the advantage of using this system when running many parallel transactions at once: `many-updates.sh` and
@@ -178,6 +159,14 @@ errors in the peer and orderer logs.
 There are two other scripts, `get-traditional.sh`, which simply gets the value of a row in the traditional way, with no deltas, and `del-traditional.sh` will delete an asset in the traditional way.
 
 Examples:
-`./many-updates.sh testvar 100 +` --> final value from `./get-invoke.sh testvar` should be 100000
+`./scripts/many-updates.sh testvar 100 +` --> final value from `./scripts/get-invoke.sh testvar` should be 100000
+
+`./scripts/many-updates-traditional.sh testvar` --> final value from `./scripts/get-traditional.sh testvar` is undefined
+
+### Clean up
+
+When you are finished using the `high-throughput` chaincode, you can bring down the network and remove any accompanying artifacts using the `networkDown.sh` script.
 
-`./many-updates-traditional.sh testvar` --> final value from `./get-traditional.sh testvar` is undefined
+```
+./networkDown.sh
+```

high-throughput/networkDown.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+#
+# Copyright IBM Corp All Rights Reserved
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# Exit on first error
+set -ex
+
+rm -rf bigdatacc.tar.gz log.txt
+
+# Bring the test network down
+pushd ../test-network
+./network.sh down
+popd

high-throughput/scripts/approve-commit-chaincode.sh

@@ -4,40 +4,41 @@
 # SPDX-License-Identifier: Apache-2.0
 #
 
+export CORE_PEER_TLS_ENABLED=true
 
 echo "========== Query chaincode package ID =========="
-export CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/[email protected]/msp
-export CORE_PEER_ADDRESS=peer0.org1.example.com:7051
+export CORE_PEER_MSPCONFIGPATH=../test-network/organizations/peerOrganizations/org1.example.com/users/[email protected]/msp
+export CORE_PEER_ADDRESS=localhost:7051
 export CORE_PEER_LOCALMSPID="Org1MSP"
-export CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
+export CORE_PEER_TLS_ROOTCERT_FILE=../test-network/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
 peer lifecycle chaincode queryinstalled >&log.txt
 export PACKAGE_ID=`sed -n '/Package/{s/^Package ID: //; s/, Label:.*$//; p;}' log.txt`
 
 echo "========== Approve definition for Org1 =========="
-export CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/[email protected]/msp
-export CORE_PEER_ADDRESS=peer0.org1.example.com:7051
+export CORE_PEER_MSPCONFIGPATH=../test-network/organizations/peerOrganizations/org1.example.com/users/[email protected]/msp
+export CORE_PEER_ADDRESS=localhost:7051
 export CORE_PEER_LOCALMSPID="Org1MSP"
-export CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
-peer lifecycle chaincode install ${CC_NAME}.tar.gz
+export CORE_PEER_TLS_ROOTCERT_FILE=../test-network/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
+peer lifecycle chaincode install bigdatacc.tar.gz
 
-peer lifecycle chaincode approveformyorg -o orderer.example.com:7050 --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem --channelID $CHANNEL_NAME --signature-policy "OR('Org1MSP.peer', 'Org2MSP.peer')" --name $CC_NAME --version $1 --init-required --package-id ${PACKAGE_ID} --sequence $1
+peer lifecycle chaincode approveformyorg -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com --tls $CORE_PEER_TLS_ENABLED --cafile ../test-network/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem --channelID mychannel --signature-policy "OR('Org1MSP.peer', 'Org2MSP.peer')" --name bigdatacc --version 0 --init-required --package-id ${PACKAGE_ID} --sequence 1
 
 echo "========== Approve definition for Org2 =========="
-export CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/[email protected]/msp
-export CORE_PEER_ADDRESS=peer0.org2.example.com:9051
+export CORE_PEER_MSPCONFIGPATH=../test-network/organizations/peerOrganizations/org2.example.com/users/[email protected]/msp
+export CORE_PEER_ADDRESS=localhost:9051
 export CORE_PEER_LOCALMSPID="Org2MSP"
-export CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
-peer lifecycle chaincode approveformyorg -o orderer.example.com:7050 --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem --channelID $CHANNEL_NAME --signature-policy "OR('Org1MSP.peer', 'Org2MSP.peer')" --name $CC_NAME --version $1 --init-required --package-id ${PACKAGE_ID} --sequence $1
+export CORE_PEER_TLS_ROOTCERT_FILE=../test-network/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
+peer lifecycle chaincode approveformyorg -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com --tls $CORE_PEER_TLS_ENABLED --cafile ../test-network/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem --channelID mychannel --signature-policy "OR('Org1MSP.peer', 'Org2MSP.peer')" --name bigdatacc --version 0 --init-required --package-id ${PACKAGE_ID} --sequence 1
 
-. query-status.sh
+. scripts/check-commit-readiness.sh
 
-queryStatus $1 0 1 "\"Org1MSP\": true" "\"Org2MSP\": true"
-queryStatus $1 0 2 "\"Org1MSP\": true" "\"Org2MSP\": true"
+checkCommitReadiness 1 "\"Org1MSP\": true" "\"Org2MSP\": true"
+checkCommitReadiness 2 "\"Org1MSP\": true" "\"Org2MSP\": true"
 
 
-echo "========== Commit the definition the $CHANNEL_NAME =========="
-peer lifecycle chaincode commit -o orderer.example.com:7050 --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem --channelID $CHANNEL_NAME --signature-policy "OR('Org1MSP.peer', 'Org2MSP.peer')" --name $CC_NAME --version $1 --init-required --sequence $1 --waitForEvent --peerAddresses peer0.org1.example.com:7051 --tlsRootCertFiles /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt --peerAddresses peer0.org2.example.com:9051 --tlsRootCertFiles /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
+echo "========== Commit the definition the mychannel =========="
+peer lifecycle chaincode commit -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com --tls $CORE_PEER_TLS_ENABLED --cafile ../test-network/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem --channelID mychannel --signature-policy "OR('Org1MSP.peer', 'Org2MSP.peer')" --name bigdatacc --version 0 --init-required --sequence 1 --waitForEvent --peerAddresses localhost:7051 --tlsRootCertFiles ../test-network/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt --peerAddresses localhost:9051 --tlsRootCertFiles ../test-network/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
 
 
 echo "========== Invoke the Init function =========="
-peer chaincode invoke -o orderer.example.com:7050  --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem  -C $CHANNEL_NAME -n $CC_NAME --isInit -c '{"Args":["Init"]}'
+peer chaincode invoke -o localhost:7050 --ordererTLSHostnameOverride orderer.example.com --tls $CORE_PEER_TLS_ENABLED --cafile ../test-network/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem  -C mychannel -n bigdatacc --isInit -c '{"Args":["Init"]}'