diff --git a/source/_integrations/aquostv.markdown b/source/_integrations/aquostv.markdown
index 9de90c11049f..333ff9114a54 100644
--- a/source/_integrations/aquostv.markdown
+++ b/source/_integrations/aquostv.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `aquostv` platform allows you to control a [Sharp Aquos TV](https://global.sharp/aquos/index.html).
+The **Sharp Aquos TV** {% term integration %} allows you to control a [Sharp Aquos TV](https://global.sharp/aquos/index.html).
 
 When the TV is first connected, you will need to accept Home Assistant on the TV to allow communication.
 
diff --git a/source/_integrations/braviatv.markdown b/source/_integrations/braviatv.markdown
index 7ddf64152f40..d07d345d8149 100644
--- a/source/_integrations/braviatv.markdown
+++ b/source/_integrations/braviatv.markdown
@@ -21,7 +21,7 @@ ha_ssdp: true
 ha_integration_type: device
 ---
 
-The **Bravia TV** {% term integration %} allows you to control a [Sony Bravia TV](https://www.sony.com/).
+The **Sony Bravia TV** {% term integration %} allows you to control a [Sony Bravia TV](https://www.sony.com/).
 
 Almost all [Sony Bravia TV 2013 and newer](https://info.tvsideview.sony.net/en_ww/home_device.html#bravia) are supported. For older TVs see more generic methods to control your device [below](#for-tvs-older-than-2013).
 
diff --git a/source/_integrations/emonitor.markdown b/source/_integrations/emonitor.markdown
index 18574dcf10d6..3dbd7c7dfae1 100644
--- a/source/_integrations/emonitor.markdown
+++ b/source/_integrations/emonitor.markdown
@@ -15,6 +15,6 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The SiteSage Emonitor allows local power monitoring on a per circuit basis via an [Emonitor](https://powerhousedynamics.com/solutions/sitesage/) device.
+The **SiteSage Emonitor** {% term integration %} allows local power monitoring on a per circuit basis via an [Emonitor](https://powerhousedynamics.com/solutions/sitesage/) device.
 
 {% include integrations/config_flow.md %}
diff --git a/source/_integrations/familyhub.markdown b/source/_integrations/familyhub.markdown
index 91d9c86a1c10..b542bd70a7e7 100644
--- a/source/_integrations/familyhub.markdown
+++ b/source/_integrations/familyhub.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `familyhub` {% term integration %}  allows you to get images of the inside of your [Samsung Family Hub refrigerator](https://www.samsung.com/us/explore/family-hub-refrigerator/connected-hub/) in Home Assistant.
+The **Samsung Family Hub** {% term integration %} allows you to get images of the inside of your [Samsung Family Hub refrigerator](https://www.samsung.com/us/explore/family-hub-refrigerator/connected-hub/) in Home Assistant.
 
 ## Configuration
 
diff --git a/source/_integrations/luftdaten.markdown b/source/_integrations/luftdaten.markdown
index 0ac9a2e1974d..26a72f4ed728 100644
--- a/source/_integrations/luftdaten.markdown
+++ b/source/_integrations/luftdaten.markdown
@@ -17,7 +17,7 @@ ha_platforms:
 ha_integration_type: device
 ---
 
-The Sensor.Community {% term integration %} will query the open data API of [Sensor.Community](https://sensor.community) to monitor air quality and other weather data from a specific (self build) sensor station.
+The **Sensor.Community** {% term integration %} will query the open data API of [Sensor.Community](https://sensor.community) to monitor air quality and other weather data from a specific (self build) sensor station.
 
 ## Prerequisites
 
diff --git a/source/_integrations/pooldose.markdown b/source/_integrations/pooldose.markdown
index d9cbf827d3b4..a2d98a551081 100644
--- a/source/_integrations/pooldose.markdown
+++ b/source/_integrations/pooldose.markdown
@@ -21,7 +21,7 @@ ha_quality_scale: bronze
 ha_dhcp: true
 ---
 
-The PoolDose {% term integration %} connects a [SEKO](https://www.seko.com/) water treatment system with Home Assistant. SEKO is a manufacturer of various monitoring and control devices for pools and spas.
+The **SEKO PoolDose** {% term integration %} connects a [SEKO](https://www.seko.com/) water treatment system with Home Assistant. SEKO is a manufacturer of various monitoring and control devices for pools and spas.
 
 This integration uses an undocumented local HTTP API. It provides live readings for pool sensors such as temperature, pH, ORP/Redox, alarm status, relay states, as well as configuration parameters.
 
diff --git a/source/_integrations/ps4.markdown b/source/_integrations/ps4.markdown
index ca673ba521e8..f8446ffc4a2a 100644
--- a/source/_integrations/ps4.markdown
+++ b/source/_integrations/ps4.markdown
@@ -14,7 +14,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The `ps4` integration allows you to control a
+The **Sony PlayStation 4** {% term integration %} allows you to control a
 [Sony PlayStation 4 console](https://www.playstation.com/ps4/).
 
 ## Requirements
diff --git a/source/_integrations/pvpc_hourly_pricing.markdown b/source/_integrations/pvpc_hourly_pricing.markdown
index e284f32d45de..24921e2737fa 100644
--- a/source/_integrations/pvpc_hourly_pricing.markdown
+++ b/source/_integrations/pvpc_hourly_pricing.markdown
@@ -14,7 +14,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-This sensor uses the official API to get the hourly price of electricity in Spain from <https://www.esios.ree.es/en/pvpc>.
+This {% term integration %} uses the official API to get the hourly price of electricity in Spain from <https://www.esios.ree.es/en/pvpc>.
 
 Specifically, it shows the current __active energy invoicing price (FEU)__ in €/kWh, which is the energy term hourly price applied in the consumers' electrical bill with a contracted power not exceeding 15 kW and which are under the PVPC (Voluntary Price for Small Consumer).
 
diff --git a/source/_integrations/saj.markdown b/source/_integrations/saj.markdown
index 7b71c2277eba..fc05f3bcefe7 100644
--- a/source/_integrations/saj.markdown
+++ b/source/_integrations/saj.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `saj` {% term integration %} will poll a [SAJ](https://www.saj-electric.com/) solar inverter and present the values as sensors in Home Assistant.
+The **SAJ Solar Inverter** {% term integration %} will poll a [SAJ](https://www.saj-electric.com/) solar inverter and present the values as sensors in Home Assistant.
 
 This sensor uses the web interface and to use it, you have to be able to connect to the solar inverter from your favorite web browser. 
 Not all inverters appear to support the local interface.
diff --git a/source/_integrations/samsungtv.markdown b/source/_integrations/samsungtv.markdown
index f077ee0bb35d..450d5e73ed3d 100644
--- a/source/_integrations/samsungtv.markdown
+++ b/source/_integrations/samsungtv.markdown
@@ -22,7 +22,7 @@ ha_integration_type: device
 ha_quality_scale: silver
 ---
 
-The `samsungtv` platform allows you to control a [Samsung Smart TV](https://www.samsung.com/uk/tvs/all-tvs/).
+The **Samsung Smart TV** {% term integration %} allows you to control a [Samsung Smart TV](https://www.samsung.com/uk/tvs/all-tvs/).
 
 {% include integrations/config_flow.md %}
 
diff --git a/source/_integrations/sanix.markdown b/source/_integrations/sanix.markdown
index df439280007c..36add671a224 100644
--- a/source/_integrations/sanix.markdown
+++ b/source/_integrations/sanix.markdown
@@ -14,7 +14,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The Sanix {% term integration %} allows you to get water/sewage level sensor measurements from the Sanix devices made by [BIT Complex](https://bitcomplex.pl/).
+The **Sanix** {% term integration %} allows you to get water/sewage level sensor measurements from the Sanix devices made by [BIT Complex](https://bitcomplex.pl/).
 
 ## Pre-requisites
 
diff --git a/source/_integrations/schlage.markdown b/source/_integrations/schlage.markdown
index 639eb8c86820..f66c187e405f 100644
--- a/source/_integrations/schlage.markdown
+++ b/source/_integrations/schlage.markdown
@@ -21,7 +21,7 @@ ha_integration_type: integration
 ha_domain: schlage
 ---
 
-The Schlage {% term integration %} provides connectivity with Schlage WiFi smart locks through Schlage's cloud API.
+The **Schlage** {% term integration %} provides connectivity with Schlage WiFi smart locks through Schlage's cloud API.
 
 ## Known working devices
 
diff --git a/source/_integrations/schluter.markdown b/source/_integrations/schluter.markdown
index 67e9212cceb0..b906c82724a0 100644
--- a/source/_integrations/schluter.markdown
+++ b/source/_integrations/schluter.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `schluter` {% term integration %} allows you to integrate your [Schluter-DITRA-HEAT-E-WiFi](https://www.schluter.com/schluter-us/en_US/ditra-heat-wifi) electric floor heating thermostat in Home Assistant.
+The **Schluter** {% term integration %} allows you to integrate your [Schluter-DITRA-HEAT-E-WiFi](https://www.schluter.com/schluter-us/en_US/ditra-heat-wifi) electric floor heating thermostat in Home Assistant.
 
 {% important %}
 You will need to create a Schluter DITRA-HEAT account and register your thermostat with it. This can be done via the thermostat touchscreen, where an email will be sent to you to confirm your account.
diff --git a/source/_integrations/script.markdown b/source/_integrations/script.markdown
index bcff5fb49acb..91797f4d8f18 100644
--- a/source/_integrations/script.markdown
+++ b/source/_integrations/script.markdown
@@ -11,7 +11,7 @@ ha_domain: script
 ha_integration_type: system
 ---
 
-The script {% term integration %} allows users to specify a sequence of actions to be executed by Home Assistant. These are run when you turn the script on. The script integration will create an entity for each script and allow them to be controlled via actions.
+The **Scripts** {% term integration %} allows users to specify a sequence of actions to be executed by Home Assistant. These are run when you turn the script on. The script integration will create an entity for each script and allow them to be controlled via actions.
 
 Scripts can be created via YAML configuration (described below) or via {% my scripts title="the UI" %}.
 
diff --git a/source/_integrations/scsgate.markdown b/source/_integrations/scsgate.markdown
index 07c0954a9ce9..39229b480641 100644
--- a/source/_integrations/scsgate.markdown
+++ b/source/_integrations/scsgate.markdown
@@ -20,7 +20,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The SCSGate {% term integration %} support the [SCSGate](https://translate.google.com/translate?hl=en&sl=it&tl=en&u=http%3A%2F%2Fguidopic.altervista.org%2Feibscsgt%2Finterface.html) device. This a home-brew device allows to interact with the MyHome system from BTicino/Legrande.
+The **SCSGate** {% term integration %} support the [SCSGate](https://translate.google.com/translate?hl=en&sl=it&tl=en&u=http%3A%2F%2Fguidopic.altervista.org%2Feibscsgt%2Finterface.html) device. This a home-brew device allows to interact with the MyHome system from BTicino/Legrande.
 
 There is currently support for the following device types within Home Assistant:
 
diff --git a/source/_integrations/sendgrid.markdown b/source/_integrations/sendgrid.markdown
index 7b117f24445c..66237b2a0244 100644
--- a/source/_integrations/sendgrid.markdown
+++ b/source/_integrations/sendgrid.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `sendgrid` notification {% term integration %} sends email notifications via [SendGrid](https://sendgrid.com/), a proven cloud-based email platform.
+The **SendGrid** {% term integration %} sends email notifications via [SendGrid](https://sendgrid.com/), a proven cloud-based email platform.
 
 ## Setup
 
diff --git a/source/_integrations/sentry.markdown b/source/_integrations/sentry.markdown
index 60360e6a6ac6..1f268d86889f 100644
--- a/source/_integrations/sentry.markdown
+++ b/source/_integrations/sentry.markdown
@@ -17,7 +17,7 @@ ha_integration_type: service
 The free Sentry account allows 5000 events per month. Depending on the amount of events sent to Sentry, you will either have to upgrade your Sentry account or have a period without data flowing from Home Assistant to Sentry.
 {% endimportant %}
 
-The Sentry integration in Home Assistant integrates with [Sentry](https://sentry.io/) to capture both logged errors as well as unhandled exceptions in Home Assistant.
+The **Sentry** {% term integration %} in Home Assistant integrates with [Sentry](https://sentry.io/) to capture both logged errors as well as unhandled exceptions in Home Assistant.
 
 ## Preparation
 
diff --git a/source/_integrations/serial.markdown b/source/_integrations/serial.markdown
index 88f5478dd5f6..0cb7477c9727 100644
--- a/source/_integrations/serial.markdown
+++ b/source/_integrations/serial.markdown
@@ -13,7 +13,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The `serial` sensor {% term integration %} is using the data provided by a device connected to the serial port of the system where Home Assistant is running. With [`ser2net`](https://ser2net.sourceforge.net/) and [`socat`](http://www.dest-unreach.org/socat/) would it also work for sensors connected to a remote system.
+The **Serial** {% term integration %} is using the data provided by a device connected to the serial port of the system where Home Assistant is running. With [`ser2net`](https://ser2net.sourceforge.net/) and [`socat`](http://www.dest-unreach.org/socat/) would it also work for sensors connected to a remote system.
 
 To check what kind of data is arriving at your serial port, use a command-line tool like `minicom` or `picocom` on Linux, on a macOS you can use `screen` or on Windows `putty`.
 
diff --git a/source/_integrations/sesame.markdown b/source/_integrations/sesame.markdown
index d97a7555a199..5ac2eedda5f0 100644
--- a/source/_integrations/sesame.markdown
+++ b/source/_integrations/sesame.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `sesame` {% term integration %} allows you to control your [Sesame](https://candyhouse.co/) smart locks made by CANDY HOUSE, Inc.
+The **Sesame Smart Lock** {% term integration %} allows you to control your [Sesame](https://candyhouse.co/) smart locks made by CANDY HOUSE, Inc.
 
 ## Sesame Smart Lock Versions
 
diff --git a/source/_integrations/seven_segments.markdown b/source/_integrations/seven_segments.markdown
index 0e40c1a23bf4..9bfaa4372198 100644
--- a/source/_integrations/seven_segments.markdown
+++ b/source/_integrations/seven_segments.markdown
@@ -16,7 +16,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `seven_segments` image processing {% term integration %} allows you to read physical seven segments displays through Home Assistant. [`ssocr`](https://www.unix-ag.uni-kl.de/~auerswal/ssocr/) is used to extract the value shown on the display which is observed by a [camera](/integrations/camera/).
+The **Seven Segments OCR** {% term integration %} allows you to read physical seven segments displays through Home Assistant. [`ssocr`](https://www.unix-ag.uni-kl.de/~auerswal/ssocr/) is used to extract the value shown on the display which is observed by a [camera](/integrations/camera/).
 
 ## Configuration
 
diff --git a/source/_integrations/sfr_box.markdown b/source/_integrations/sfr_box.markdown
index f84139cbaaab..59f388234edd 100644
--- a/source/_integrations/sfr_box.markdown
+++ b/source/_integrations/sfr_box.markdown
@@ -17,7 +17,7 @@ ha_platforms:
 ha_integration_type: device
 ---
 
-The SFR Box integration offers integration with the **SFR** broadband router.
+The **SFR Box** {% term integration %} offers integration with the **SFR** broadband router.
 
 This integration provides the following platforms:
 
diff --git a/source/_integrations/shodan.markdown b/source/_integrations/shodan.markdown
index ae35327721fb..91dfd0c2f068 100644
--- a/source/_integrations/shodan.markdown
+++ b/source/_integrations/shodan.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `shodan` sensor {% term integration %} is displaying the total of result of a
+The **Shodan** {% term integration %} is displaying the total of result of a
 [Shodan](https://www.shodan.io/) query.
 
 Use "Show API Key" in the upper right corner when you are logged in or got to
diff --git a/source/_integrations/sia.markdown b/source/_integrations/sia.markdown
index fa3e70c7800f..fac5dbccfa20 100644
--- a/source/_integrations/sia.markdown
+++ b/source/_integrations/sia.markdown
@@ -15,7 +15,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The SIA Alarm Systems {% term integration %} provides integration with several alarm systems that implement the SIA Protocol, including [Ajax Systems](https://ajax.systems/). This protocol is listen-only, so does not allow you to turn on/off your alarm system, it just updates the state to reflect your alarm and allows you to act on that state, for instance turning on all lights and opening the curtains when the alarm triggers. The underlying package has support for different variants of SIA, including DC-09, DC-04 and a limited set of ADM-CID. If your alarm system uses the ADM-CID standard and it isn't working, please log an issue [here](https://github.com/eavanvalkenburg/pysiaalarm/issues/new).
+The **SIA Alarm Systems** {% term integration %} provides integration with several alarm systems that implement the SIA Protocol, including [Ajax Systems](https://ajax.systems/). This protocol is listen-only, so does not allow you to turn on/off your alarm system, it just updates the state to reflect your alarm and allows you to act on that state, for instance turning on all lights and opening the curtains when the alarm triggers. The underlying package has support for different variants of SIA, including DC-09, DC-04 and a limited set of ADM-CID. If your alarm system uses the ADM-CID standard and it isn't working, please log an issue [here](https://github.com/eavanvalkenburg/pysiaalarm/issues/new).
 
 To use this platform, you need to setup your alarm system to communicate using the SIA Protocol and setup several things on the alarm. This integration basically works by Home Assistant listening on a port for messages from the alarm systems and handling and responding to that message and finally updating one or more entities in Home Assistant.
 
diff --git a/source/_integrations/signal_messenger.markdown b/source/_integrations/signal_messenger.markdown
index fd2c57fc372c..85bebcb12c5b 100644
--- a/source/_integrations/signal_messenger.markdown
+++ b/source/_integrations/signal_messenger.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `signal_messenger` {% term integration %} uses the [Signal Messenger REST API](https://github.com/bbernhard/signal-cli-rest-api) to deliver notifications from Home Assistant to your Android or iOS device.
+The **Signal Messenger** {% term integration %} uses the [Signal Messenger REST API](https://github.com/bbernhard/signal-cli-rest-api) to deliver notifications from Home Assistant to your Android or iOS device.
 
 ## Setup
  
diff --git a/source/_integrations/simplepush.markdown b/source/_integrations/simplepush.markdown
index 2451e13cd953..bcebe3d3a3d7 100644
--- a/source/_integrations/simplepush.markdown
+++ b/source/_integrations/simplepush.markdown
@@ -14,7 +14,7 @@ ha_codeowners:
   - '@engrbm87'
 ---
 
-The `simplepush` platform uses [Simplepush](https://simplepush.io/) to deliver notifications from Home Assistant to your Android and iOS device. Unlike similar apps the Simplepush app requires no registration and supports end-to-end encryption.
+The **Simplepush** {% term integration %} uses [Simplepush](https://simplepush.io/) to deliver notifications from Home Assistant to your Android and iOS device. Unlike similar apps the Simplepush app requires no registration and supports end-to-end encryption.
 
 {% include integrations/config_flow.md %}
 
diff --git a/source/_integrations/simplisafe.markdown b/source/_integrations/simplisafe.markdown
index dc8e1cc0e96b..c6ed629786b7 100644
--- a/source/_integrations/simplisafe.markdown
+++ b/source/_integrations/simplisafe.markdown
@@ -22,7 +22,7 @@ ha_dhcp: true
 ha_integration_type: hub
 ---
 
-The `simplisafe` {% term integration %} integrates [SimpliSafe home security](https://simplisafe.com) (V2 and V3) systems into Home Assistant. Multiple SimpliSafe accounts can be accommodated.
+The **SimpliSafe** {% term integration %} integrates [SimpliSafe home security](https://simplisafe.com) (V2 and V3) systems into Home Assistant. Multiple SimpliSafe accounts can be accommodated.
 
 There is currently support for the following device types within Home Assistant:
 
diff --git a/source/_integrations/sinch.markdown b/source/_integrations/sinch.markdown
index 5843bb499176..c7a4a42ca6ac 100644
--- a/source/_integrations/sinch.markdown
+++ b/source/_integrations/sinch.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `sinch` {% term integration %} uses [Sinch](https://www.sinch.com/products/apis/messaging/sms/) to deliver notifications from Home Assistant.
+The **Sinch SMS** {% term integration %} uses [Sinch](https://www.sinch.com/products/apis/messaging/sms/) to deliver notifications from Home Assistant.
 
 ## Prerequisites
 
diff --git a/source/_integrations/sisyphus.markdown b/source/_integrations/sisyphus.markdown
index 82d188e241e5..c970d5d28010 100644
--- a/source/_integrations/sisyphus.markdown
+++ b/source/_integrations/sisyphus.markdown
@@ -17,7 +17,7 @@ ha_integration_type: integration
 ha_quality_scale: legacy
 ---
 
-The [Sisyphus](https://sisyphus-industries.com/) integration for Home Assistant allows you to observe and control your Sisyphus Kinetic Art Table.
+The [Sisyphus](https://sisyphus-industries.com/) {% term integration %} for Home Assistant allows you to observe and control your Sisyphus Kinetic Art Table.
 
 There is currently support for the following device types within Home Assistant:
 
diff --git a/source/_integrations/sky_hub.markdown b/source/_integrations/sky_hub.markdown
index 7a52561bd3c1..4fc61001f379 100644
--- a/source/_integrations/sky_hub.markdown
+++ b/source/_integrations/sky_hub.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `sky_hub` {% term integration %} offers presence detection by looking at connected devices to a [Sky Hub router](https://www.sky.com/shop/broadband-talk/sky-hub/) based router.
+The **Sky Hub** {% term integration %} offers presence detection by looking at connected devices to a [Sky Hub router](https://www.sky.com/shop/broadband-talk/sky-hub/) based router.
 
 To use your Sky Hub device in your installation, add the following to your {% term "`configuration.yaml`" %} file.
 {% include integrations/restart_ha_after_config_inclusion.md %}
diff --git a/source/_integrations/sky_remote.markdown b/source/_integrations/sky_remote.markdown
index 18b9ba282697..fb690da2069a 100644
--- a/source/_integrations/sky_remote.markdown
+++ b/source/_integrations/sky_remote.markdown
@@ -18,7 +18,7 @@ related:
     title: Configuration file
 ---
 
-The **Sky Remote** {% term integration %} lets you control a [Sky](https://www.sky.com/) box using Home Assistant.
+The **Sky Remote Control** {% term integration %} lets you control a [Sky](https://www.sky.com/) box using Home Assistant.
 
 ## Supported models
 
diff --git a/source/_integrations/skybeacon.markdown b/source/_integrations/skybeacon.markdown
index fb8c4d298195..c39cdacf12e3 100644
--- a/source/_integrations/skybeacon.markdown
+++ b/source/_integrations/skybeacon.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `skybeacon` sensor {% term integration %} supports [CR2477](https://cnsky9.en.alibaba.com/)-powered [iBeacon](https://en.wikipedia.org/wiki/IBeacon)/eddystone sensors that come with temperature/sensor module.
+The **Skybeacon** {% term integration %} supports [CR2477](https://cnsky9.en.alibaba.com/)-powered [iBeacon](https://en.wikipedia.org/wiki/IBeacon)/eddystone sensors that come with temperature/sensor module.
 
 ## Configuration
 
diff --git a/source/_integrations/skybell.markdown b/source/_integrations/skybell.markdown
index ce57096cd423..42773181c099 100644
--- a/source/_integrations/skybell.markdown
+++ b/source/_integrations/skybell.markdown
@@ -23,7 +23,7 @@ ha_codeowners:
 ha_integration_type: hub
 ---
 
-The `skybell` implementation allows you to integrate your [Skybell.com](http://www.skybell.com/) doorbells in Home Assistant.
+The **SkyBell** {% term integration %} allows you to integrate your [Skybell.com](http://www.skybell.com/) doorbells in Home Assistant.
 
 There is currently support for the following device types within Home Assistant:
 
diff --git a/source/_integrations/slack.markdown b/source/_integrations/slack.markdown
index 28bc836a02db..a2287cd32bf1 100644
--- a/source/_integrations/slack.markdown
+++ b/source/_integrations/slack.markdown
@@ -16,7 +16,7 @@ ha_platforms:
 ha_integration_type: service
 ---
 
-The `slack` platform allows you to deliver notifications from Home Assistant to [Slack](https://slack.com/).
+The **Slack** {% term integration %} allows you to deliver notifications from Home Assistant to [Slack](https://slack.com/).
 
 ![](/images/integrations/slack/slack-message.png)
 
diff --git a/source/_integrations/sleepiq.markdown b/source/_integrations/sleepiq.markdown
index 9bf1cd348061..8dc169d313ca 100644
--- a/source/_integrations/sleepiq.markdown
+++ b/source/_integrations/sleepiq.markdown
@@ -29,7 +29,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The SleepIQ {% term integration %} lets you integrate your SleepNumber Bed via [SleepIQ by SleepNumber](https://www.sleepnumber.com/pages/sleepiq-sleep-tracker).
+The **SleepIQ** {% term integration %} lets you integrate your SleepNumber Bed via [SleepIQ by SleepNumber](https://www.sleepnumber.com/pages/sleepiq-sleep-tracker).
 
 ## Prerequisites
 
diff --git a/source/_integrations/slide.markdown b/source/_integrations/slide.markdown
index 46f748a88392..c26839e08583 100644
--- a/source/_integrations/slide.markdown
+++ b/source/_integrations/slide.markdown
@@ -18,7 +18,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `slide` {% term integration %} allows you to integrate your [slide.store](https://slide.store/) devices in Home Assistant using the [official API](https://documenter.getpostman.com/view/6223391/S1Lu2pSf?version=latest).
+The **Slide** {% term integration %} allows you to integrate your [slide.store](https://slide.store/) devices in Home Assistant using the [official API](https://documenter.getpostman.com/view/6223391/S1Lu2pSf?version=latest).
 
 ### Configuration
 
diff --git a/source/_integrations/slide_local.markdown b/source/_integrations/slide_local.markdown
index 7c9462c4c4ea..cdca289a3b4e 100644
--- a/source/_integrations/slide_local.markdown
+++ b/source/_integrations/slide_local.markdown
@@ -19,7 +19,7 @@ ha_zeroconf: true
 ha_quality_scale: gold
 ---
 
-The Slide Local {% term integration %} allows you to integrate your [Slide](https://slide.store/) devices in Home Assistant using the local API.
+The **Slide Local** {% term integration %} allows you to integrate your [Slide](https://slide.store/) devices in Home Assistant using the local API.
 
 ## Supported devices
 
diff --git a/source/_integrations/slimproto.markdown b/source/_integrations/slimproto.markdown
index 604865c7265e..a0404845152e 100644
--- a/source/_integrations/slimproto.markdown
+++ b/source/_integrations/slimproto.markdown
@@ -14,7 +14,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The SlimProto integration allows you to control a [Squeezebox](https://en.wikipedia.org/wiki/Squeezebox_%28network_music_player%29) music player directly from Home Assistant, without the need for an external Media Server such as Logitech Media Server. This lets you control Squeezebox hardware like the Classic, Transporter, Duet, Boom, Radio, and Touch and software players like [Squeezelite](https://github.com/ralph-irving/squeezelite), [PiCorePlayer](https://www.picoreplayer.org/) or [Max2Play](https://www.max2play.com/en/). For the real DIY enthusiast, [there even is a player for the ESP32](https://github.com/sle118/squeezelite-esp32).
+The **SlimProto** {% term integration %} allows you to control a [Squeezebox](https://en.wikipedia.org/wiki/Squeezebox_%28network_music_player%29) music player directly from Home Assistant, without the need for an external Media Server such as Logitech Media Server. This lets you control Squeezebox hardware like the Classic, Transporter, Duet, Boom, Radio, and Touch and software players like [Squeezelite](https://github.com/ralph-irving/squeezelite), [PiCorePlayer](https://www.picoreplayer.org/) or [Max2Play](https://www.max2play.com/en/). For the real DIY enthusiast, [there even is a player for the ESP32](https://github.com/sle118/squeezelite-esp32).
 
 {% include integrations/config_flow.md %}
 
diff --git a/source/_integrations/sma.markdown b/source/_integrations/sma.markdown
index 790a01516cca..d34b7ef8809e 100644
--- a/source/_integrations/sma.markdown
+++ b/source/_integrations/sma.markdown
@@ -18,7 +18,7 @@ ha_integration_type: device
 ha_dhcp: true
 ---
 
-The SMA Solar integration will poll a [SMA](http://www.sma-solar.com/) [(US)](https://www.sma-america.com/) solar inverter, energy meter or battery inverter and present the values as sensors in Home Assistant.
+The **SMA Solar** {% term integration %} will poll a [SMA](http://www.sma-solar.com/) [(US)](https://www.sma-america.com/) solar inverter, energy meter or battery inverter and present the values as sensors in Home Assistant.
 
 
 {% include integrations/config_flow.md %}
diff --git a/source/_integrations/smappee.markdown b/source/_integrations/smappee.markdown
index 09b2bca6d1a6..b4115666cc3d 100644
--- a/source/_integrations/smappee.markdown
+++ b/source/_integrations/smappee.markdown
@@ -24,7 +24,7 @@ related:
     title: Configuration file
 ---
 
-The Smappee {% term integration %} will allow users to integrate their Smappee monitors, Smappee Comfort Plugs and Smappee Switches into Home Assistant using the [official cloud API](https://smappee.atlassian.net/wiki/spaces/DEVAPI/overview) or the limited local option.
+The **Smappee** {% term integration %} will allow users to integrate their Smappee monitors, Smappee Comfort Plugs and Smappee Switches into Home Assistant using the [official cloud API](https://smappee.atlassian.net/wiki/spaces/DEVAPI/overview) or the limited local option.
 
 ## Smappee monitors
 
diff --git a/source/_integrations/smarla.markdown b/source/_integrations/smarla.markdown
index 3c8122d02e0b..7b8b25ea8cd3 100644
--- a/source/_integrations/smarla.markdown
+++ b/source/_integrations/smarla.markdown
@@ -20,7 +20,7 @@ ha_platforms:
 ha_quality_scale: bronze
 ---
 
-The `smarla` {% term integration %} enables Home Assistant to integrate [Swing2Sleep](https://swing2sleep.de) (Smarla) motorized cradles. This integration will allow you to control your Smarla device.
+The **Swing2Sleep Smarla** {% term integration %} enables Home Assistant to integrate [Swing2Sleep](https://swing2sleep.de) (Smarla) motorized cradles. This integration will allow you to control your Smarla device.
 
 ## Requirements
 
diff --git a/source/_integrations/smart_meter_texas.markdown b/source/_integrations/smart_meter_texas.markdown
index 85bf3412c52d..9ccf3f158922 100644
--- a/source/_integrations/smart_meter_texas.markdown
+++ b/source/_integrations/smart_meter_texas.markdown
@@ -14,7 +14,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The [Smart Meter Texas](https://www.smartmetertexas.com/) integration allows Texas residents to integrate their electric meters into Home Assistant. This integration will create a sensor for each meter that shows the current reading.
+The [Smart Meter Texas](https://www.smartmetertexas.com/) {% term integration %} allows Texas residents to integrate their electric meters into Home Assistant. This integration will create a sensor for each meter that shows the current reading.
 
 On its own this sensor is not particularly useful. However, combined with a [`utility_meter`](/integrations/utility_meter/) sensor you can obtain usage over a month, for example.
 
diff --git a/source/_integrations/smarttub.markdown b/source/_integrations/smarttub.markdown
index 512281e42941..5741cd251db2 100644
--- a/source/_integrations/smarttub.markdown
+++ b/source/_integrations/smarttub.markdown
@@ -22,7 +22,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The `smarttub` {% term integration %} allows you to view and control hot tubs which use the [SmartTub](https://www.jacuzzi.com/en-us/hot-tubs/owners/smarttub-system) system, in Home Assistant.
+The **SmartTub** {% term integration %} allows you to view and control hot tubs which use the [SmartTub](https://www.jacuzzi.com/en-us/hot-tubs/owners/smarttub-system) system, in Home Assistant.
 
 ## Prerequisites
 
diff --git a/source/_integrations/smarty.markdown b/source/_integrations/smarty.markdown
index 8d3d6024ff17..648c0c96d219 100644
--- a/source/_integrations/smarty.markdown
+++ b/source/_integrations/smarty.markdown
@@ -22,7 +22,7 @@ ha_platforms:
 ha_integration_type: hub
 ---
 
-The `smarty` {% term integration %} lets you control Salda [Smarty](http://www.salda.lt/en/products/category/compact-counter-flow-units) ventilation units from Home Assistant. You need a [MB-GATEWAY](http://www.salda.lt/en/products/item/5637227077) or something similar to connect to your local network.
+The **Salda Smarty** {% term integration %} lets you control Salda [Smarty](http://www.salda.lt/en/products/category/compact-counter-flow-units) ventilation units from Home Assistant. You need a [MB-GATEWAY](http://www.salda.lt/en/products/item/5637227077) or something similar to connect to your local network.
 
 There is currently support for the following device types within Home Assistant:
 
diff --git a/source/_integrations/smlight.markdown b/source/_integrations/smlight.markdown
index 164de0df5da4..18f5585eee8c 100644
--- a/source/_integrations/smlight.markdown
+++ b/source/_integrations/smlight.markdown
@@ -26,7 +26,7 @@ ha_dhcp: true
 ha_quality_scale: silver
 ---
 
-The [SMLIGHT](https://smlight.tech) SLZB-06x ethernet Zigbee coordinators provide a reliable and convenient way to integrate Zigbee devices into your smart home setup. By placing the Zigbee gateway closer to your devices, you can improve connectivity and reduce interference, avoiding the limitations of gateways hidden in cupboards or distant locations.
+The [SMLIGHT](https://smlight.tech) SLZB-06x Ethernet Zigbee coordinators provide a reliable and convenient way to integrate Zigbee devices into your smart home setup. By placing the Zigbee gateway closer to your devices, you can improve connectivity and reduce interference, avoiding the limitations of gateways hidden in cupboards or distant locations.
 
 The **SMLIGHT SLZB** {% term integration %} allows you to monitor and manage your SLZB devices directly from Home Assistant. This integration provides direct access to many features available in the SLZB device's web UI, such as managing firmware updates, monitoring device health through diagnostic sensors, and controlling settings like LED modes or restarting the device. These features can also be incorporated into your automations for central control.
 
diff --git a/source/_integrations/smtp.markdown b/source/_integrations/smtp.markdown
index bb162ceae7f5..0d041cd83d70 100644
--- a/source/_integrations/smtp.markdown
+++ b/source/_integrations/smtp.markdown
@@ -12,7 +12,7 @@ ha_integration_type: integration
 ha_quality_scale: legacy
 ---
 
-The SMTP platform allows you to deliver notifications from Home Assistant to an email recipient.
+The **SMTP** {% term integration %} allows you to deliver notifications from Home Assistant to an email recipient.
 
 To enable notification by email in your installation, add the following to your {% term "`configuration.yaml`" %} file:
 
diff --git a/source/_integrations/snapcast.markdown b/source/_integrations/snapcast.markdown
index 998306275cff..1844e458cd08 100644
--- a/source/_integrations/snapcast.markdown
+++ b/source/_integrations/snapcast.markdown
@@ -14,7 +14,7 @@ ha_codeowners:
   - '@luar123'
 ---
 
-The Snapcast integration allows you to control [Snapcast](https://github.com/badaix/snapcast) from Home Assistant.
+The **Snapcast** {% term integration %} allows you to control [Snapcast](https://github.com/badaix/snapcast) from Home Assistant.
 
 {% include integrations/config_flow.md %}
 
diff --git a/source/_integrations/solaredge.markdown b/source/_integrations/solaredge.markdown
index b07f426b322f..55947868b6f4 100644
--- a/source/_integrations/solaredge.markdown
+++ b/source/_integrations/solaredge.markdown
@@ -18,7 +18,7 @@ ha_codeowners:
 ha_integration_type: device
 ---
 
-The SolarEdge integration allows you to get details from your SolarEdge solar power setup and integrate these in your Home Assistant installation.
+The **SolarEdge** {% term integration %} allows you to get details from your SolarEdge solar power setup and integrate these in your Home Assistant installation.
 It provides two main features:
 
 1.  Site sensors: Provide real-time energy data for your entire site. For example, current power, energy today, and lifetime energy. This requires a site ID and an API key.
diff --git a/source/_integrations/solaredge_local.markdown b/source/_integrations/solaredge_local.markdown
index ec9b27cec88b..94ab2e748ed0 100644
--- a/source/_integrations/solaredge_local.markdown
+++ b/source/_integrations/solaredge_local.markdown
@@ -19,7 +19,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `solaredge_local` {% term integration %} uses the local API available on some SolarEdge Inverters to allow you to get details from your SolarEdge solar power setup and integrate these into your Home Assistant installation.
+The **SolarEdge Local** {% term integration %} uses the local API available on some SolarEdge Inverters to allow you to get details from your SolarEdge solar power setup and integrate these into your Home Assistant installation.
 
 Only specific models support the local API. The local API is available on inverters that do not have an LCD character screen. You can also  check the datasheets if in the section "Additional Features", sub-section "Inverter Commissioning" is present the following line "With the SetApp mobile application using built-in Wi-Fi access point for local connection". These inverters also have a part number that ends with a 4. For example: SEXXK-XXXXXBXX4 or SEXXXXH-XXXXXBXX4
 
diff --git a/source/_integrations/solarlog.markdown b/source/_integrations/solarlog.markdown
index b24b963d0858..f3cf054455bd 100644
--- a/source/_integrations/solarlog.markdown
+++ b/source/_integrations/solarlog.markdown
@@ -18,7 +18,7 @@ ha_integration_type: integration
 ha_quality_scale: platinum
 ---
 
-The **Solarlog** {% term integration %} uses the open JSON interface on [Solar-Log PV monitoring systems](https://www.solar-log.com/) to get details from your Solar-Log device and integrate these into your Home Assistant installation. With the integration you may monitor the solar power production and power consumption as tracked with your Solar-Log device.
+The **Solar-Log** {% term integration %} uses the open JSON interface on [Solar-Log PV monitoring systems](https://www.solar-log.com/) to get details from your Solar-Log device and integrate these into your Home Assistant installation. With the integration you may monitor the solar power production and power consumption as tracked with your Solar-Log device.
 
 ## Supported devices
 
diff --git a/source/_integrations/solax.markdown b/source/_integrations/solax.markdown
index f2f95abb628d..55093b1921e8 100644
--- a/source/_integrations/solax.markdown
+++ b/source/_integrations/solax.markdown
@@ -16,7 +16,7 @@ ha_config_flow: true
 ha_integration_type: integration
 ---
 
-The `solax` integration connects Home Assistant to Solax solar power inverters. Solax inverters may be connected to a home Wi-Fi network and expose a REST API. This integration retrieves information such as photovoltaic power production, battery levels and power, and how much power is being fed back into the grid.
+The **SolaX Power** {% term integration %} connects Home Assistant to Solax solar power inverters. Solax inverters may be connected to a home Wi-Fi network and expose a REST API. This integration retrieves information such as photovoltaic power production, battery levels and power, and how much power is being fed back into the grid.
 
 {% include integrations/config_flow.md %}
 
diff --git a/source/_integrations/soma.markdown b/source/_integrations/soma.markdown
index 6138a3feab25..f9bc557b06b9 100644
--- a/source/_integrations/soma.markdown
+++ b/source/_integrations/soma.markdown
@@ -16,7 +16,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The Soma {% term integration %} will allow users to integrate their Soma Smarthome devices into Home Assistant using the Soma Connect hub.
+The **Soma Connect** {% term integration %} will allow users to integrate their Soma Smarthome devices into Home Assistant using the Soma Connect hub.
 
 You can build a Soma Connect yourself if you have a spare Raspberry Pi. You just need to follow the [ official instructions](https://support.somasmarthome.com/hc/en-us/articles/360035521234-Install-SOMA-Connect-software). After you have the SD card plug in the Pi and use an ethernet cable or [set up Wi-Fi](https://support.somasmarthome.com/hc/en-us/articles/360026210333). Then find the IP address by checking your routers DHCP table (we will work on this step).
 
diff --git a/source/_integrations/somfy_mylink.markdown b/source/_integrations/somfy_mylink.markdown
index 6499eedf3c58..b9ef934d3ca4 100644
--- a/source/_integrations/somfy_mylink.markdown
+++ b/source/_integrations/somfy_mylink.markdown
@@ -14,7 +14,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The `Somfy MyLink` integration is used as an interface to a compatible Somfy MyLink hub utilizing the `Synergy` API. It allows the addition of covers from the Somfy MyLink platform to Home Assistant.
+The **Somfy MyLink** {% term integration %} is used as an interface to a compatible Somfy MyLink hub utilizing the `Synergy` API. It allows the addition of covers from the Somfy MyLink platform to Home Assistant.
 
 {% include integrations/config_flow.md %}
 
diff --git a/source/_integrations/sonarr.markdown b/source/_integrations/sonarr.markdown
index b269ebc74e09..e8b318a534bb 100644
--- a/source/_integrations/sonarr.markdown
+++ b/source/_integrations/sonarr.markdown
@@ -14,7 +14,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The Sonarr integration pulls data from a given [Sonarr](https://sonarr.tv/) instance. This integration only supports Sonarr v3 instances.
+The **Sonarr** {% term integration %} pulls data from a given [Sonarr](https://sonarr.tv/) instance. This integration only supports Sonarr v3 instances.
 
 {% include integrations/config_flow.md %}
 
diff --git a/source/_integrations/songpal.markdown b/source/_integrations/songpal.markdown
index bcb1f72ea061..d784d020a276 100644
--- a/source/_integrations/songpal.markdown
+++ b/source/_integrations/songpal.markdown
@@ -16,7 +16,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The `songpal` platform allows you to control Sony's Songpal ("[Audio Control API](https://developer.sony.com/develop/audio-control-api/)") compatible devices such as soundbars, AV receivers and wireless speakers from Home Assistant.
+The **Sony Songpal** {% term integration %} allows you to control Sony's Songpal ("[Audio Control API](https://developer.sony.com/develop/audio-control-api/)") compatible devices such as soundbars, AV receivers and wireless speakers from Home Assistant.
 
 Even when the API officially supports only a few devices (HT-ST5000, HT-MT500, HT-CT800, SRS-ZR5 and STR-DN1080), it has also been confirmed to work on others. [The list of supported devices](https://vssupport.sony.net/en_ww/device.html) from Sony's Songpal website lists devices which are likely to be compatible with this platform.
 
diff --git a/source/_integrations/sonos.markdown b/source/_integrations/sonos.markdown
index 521def4053f7..a2224c968435 100644
--- a/source/_integrations/sonos.markdown
+++ b/source/_integrations/sonos.markdown
@@ -26,7 +26,7 @@ ha_integration_type: integration
 ha_quality_scale: bronze
 ---
 
-The `sonos` integration allows you to control your [Sonos](https://www.sonos.com) wireless speakers from Home Assistant. It also works with IKEA Symfonisk speakers.
+The **Sonos** {% term integration %} allows you to control your [Sonos](https://www.sonos.com) wireless speakers from Home Assistant. It also works with IKEA Symfonisk speakers.
 
 ## Prerequisites
 
diff --git a/source/_integrations/sony_projector.markdown b/source/_integrations/sony_projector.markdown
index 40a83fd4fc9a..353123184e01 100644
--- a/source/_integrations/sony_projector.markdown
+++ b/source/_integrations/sony_projector.markdown
@@ -12,7 +12,7 @@ ha_integration_type: integration
 ha_quality_scale: legacy
 ---
 
-The `sony_projector` switch platform allows you to control the state of SDCP compatible network-connected projectors from [Sony](https://www.sony.com/).
+The **Sony Projector** {% term integration %} allows you to control the state of SDCP compatible network-connected projectors from [Sony](https://www.sony.com/).
 
 ## Configuration
 
diff --git a/source/_integrations/spaceapi.markdown b/source/_integrations/spaceapi.markdown
index cc99f10ee133..81e451f2c834 100644
--- a/source/_integrations/spaceapi.markdown
+++ b/source/_integrations/spaceapi.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `spaceapi` {% term integration %} allow Hackerspaces and Makerspaces to expose information to web apps or any other application with the [SpaceAPI](https://spaceapi.io/).  It does this by exposing an API on Home Assistant that hosts the JSON payload that SpaceAPI uses.
+The **Space API** {% term integration %} allow Hackerspaces and Makerspaces to expose information to web apps or any other application with the [SpaceAPI](https://spaceapi.io/).  It does this by exposing an API on Home Assistant that hosts the JSON payload that SpaceAPI uses.
 
 ## Configuration
 
diff --git a/source/_integrations/speedtestdotnet.markdown b/source/_integrations/speedtestdotnet.markdown
index 6f9be33e9c7d..5a91f8cf3031 100644
--- a/source/_integrations/speedtestdotnet.markdown
+++ b/source/_integrations/speedtestdotnet.markdown
@@ -16,7 +16,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The Speedtest.net integration uses the [Speedtest.net](https://speedtest.net/) web service to measure network bandwidth performance.
+The **Speedtest.net** {% term integration %} uses the [Speedtest.net](https://speedtest.net/) web service to measure network bandwidth performance.
 
 {% include integrations/config_flow.md %}
 
diff --git a/source/_integrations/splunk.markdown b/source/_integrations/splunk.markdown
index 11ab25882a61..b9a625c6fe82 100644
--- a/source/_integrations/splunk.markdown
+++ b/source/_integrations/splunk.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `splunk` integration makes it possible to log all state changes to an external [Splunk](https://splunk.com/) database using Splunk's HTTP Event Collector (HEC) feature. You can either use this alone, or with the Home Assistant for Splunk [app](https://github.com/miniconfig/splunk-homeassistant). Since the HEC feature is new to Splunk, you will need to use at least version 6.3.
+The **Splunk** {% term integration %} makes it possible to log all state changes to an external [Splunk](https://splunk.com/) database using Splunk's HTTP Event Collector (HEC) feature. You can either use this alone, or with the Home Assistant for Splunk [app](https://github.com/miniconfig/splunk-homeassistant). Since the HEC feature is new to Splunk, you will need to use at least version 6.3.
 
 ## Configuration
 
diff --git a/source/_integrations/sql.markdown b/source/_integrations/sql.markdown
index 342d75f6daed..77bf478a05a4 100644
--- a/source/_integrations/sql.markdown
+++ b/source/_integrations/sql.markdown
@@ -19,7 +19,7 @@ related:
     title: Configuration file
 ---
 
-The `sql` sensor {% term integration %} enables you to use values from an [SQL](https://en.wikipedia.org/wiki/SQL) database supported by the [sqlalchemy](https://www.sqlalchemy.org) library, to populate a sensor state (and attributes).
+The **SQL** {% term integration %} enables you to use values from an [SQL](https://en.wikipedia.org/wiki/SQL) database supported by the [sqlalchemy](https://www.sqlalchemy.org) library, to populate a sensor state (and attributes).
 This can be used to present statistics about Home Assistant sensors if used with the `recorder` integration database. It can also be used with an external data source.
 
 **This integration can be configured using both config flow and by YAML.**
diff --git a/source/_integrations/srp_energy.markdown b/source/_integrations/srp_energy.markdown
index 18b47e7d3ebd..c260f68efa5b 100644
--- a/source/_integrations/srp_energy.markdown
+++ b/source/_integrations/srp_energy.markdown
@@ -14,7 +14,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The SRP Energy integration shows information from SRP hourly energy usage report for their customers.
+The **SRP Energy** {% term integration %} shows information from SRP hourly energy usage report for their customers.
 
 You need a username, password, and account ID which you can create at [SRP](https://www.srpnet.com).
 
diff --git a/source/_integrations/ssdp.markdown b/source/_integrations/ssdp.markdown
index 7d0364d2bb21..d3780e8e0127 100644
--- a/source/_integrations/ssdp.markdown
+++ b/source/_integrations/ssdp.markdown
@@ -10,7 +10,7 @@ ha_quality_scale: internal
 ha_integration_type: system
 ---
 
-The `ssdp` "Simple Service Discovery Protocol" (part of UPnP) {% term integration %} will scan the network for supported devices and services. Discovered integrations will show up in the discovered section on the integrations page in the configuration panel.
+The **Simple Service Discovery Protocol (SSDP)** (part of UPnP) {% term integration %} will scan the network for supported devices and services. Discovered integrations will show up in the discovered section on the integrations page in the configuration panel.
 
 Integrations can opt-in to be found by adding [an SSDP section](https://developers.home-assistant.io/docs/creating_integration_manifest/#ssdp) to their `manifest.json`.
 
diff --git a/source/_integrations/starline.markdown b/source/_integrations/starline.markdown
index 06f70df1a325..617dce3499ea 100644
--- a/source/_integrations/starline.markdown
+++ b/source/_integrations/starline.markdown
@@ -25,7 +25,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The `starline` {% term integration %} lets you retrieve data of your [StarLine](https://www.alarmstarline.com/) security system from the [StarLine portal](https://my.starline.ru/). You will need a working StarLine account.
+The **StarLine** {% term integration %} lets you retrieve data of your [StarLine](https://www.alarmstarline.com/) security system from the [StarLine portal](https://my.starline.ru/). You will need a working StarLine account.
 
 This integration provides the following platforms:
 
diff --git a/source/_integrations/starlingbank.markdown b/source/_integrations/starlingbank.markdown
index 221da11a4772..01c5314f6709 100644
--- a/source/_integrations/starlingbank.markdown
+++ b/source/_integrations/starlingbank.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The Starling Bank sensor {% term integration %} allows you to monitor your account balance data as sensors in Home Assistant.
+The **Starling Bank** {% term integration %} allows you to monitor your account balance data as sensors in Home Assistant.
 
 - Turn off the lights when money's tight?
 - Play a song when you reach a savings goal?
diff --git a/source/_integrations/starlink.markdown b/source/_integrations/starlink.markdown
index 67f1e9dfd775..543200cd06f2 100644
--- a/source/_integrations/starlink.markdown
+++ b/source/_integrations/starlink.markdown
@@ -26,7 +26,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The Starlink {% term integration %} allows you to integrate your [Starlink](https://www.starlink.com/) into Home Assistant.
+The **Starlink** {% term integration %} allows you to integrate your [Starlink](https://www.starlink.com/) into Home Assistant.
 
 **Important:** If your Starlink is in bypass mode, you will need to open a route to it so that the local API can be accessed. Otherwise this integration will not work.
 
diff --git a/source/_integrations/statsd.markdown b/source/_integrations/statsd.markdown
index 79a2e46b691b..805f84705fa2 100644
--- a/source/_integrations/statsd.markdown
+++ b/source/_integrations/statsd.markdown
@@ -13,7 +13,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `statsd` {% term integration %} makes it possible to transfer all state changes to an external [StatsD](https://github.com/etsy/statsd) instance.
+The **StatsD** {% term integration %} makes it possible to transfer all state changes to an external [StatsD](https://github.com/etsy/statsd) instance.
 
 To use the `statsd` {% term integration %} in your installation, add the following to your {% term "`configuration.yaml`" %} file.
 {% include integrations/restart_ha_after_config_inclusion.md %}
diff --git a/source/_integrations/steam_online.markdown b/source/_integrations/steam_online.markdown
index a534f12ff663..3a21c2428403 100644
--- a/source/_integrations/steam_online.markdown
+++ b/source/_integrations/steam_online.markdown
@@ -14,7 +14,7 @@ ha_codeowners:
 ha_integration_type: service
 ---
 
-The Steam {% term integration %} will allow you to track the online status of public [Steam](https://steamcommunity.com) accounts.
+The **Steam** {% term integration %} will allow you to track the online status of public [Steam](https://steamcommunity.com) accounts.
 
 {% include integrations/config_flow.md %}
 
diff --git a/source/_integrations/steamist.markdown b/source/_integrations/steamist.markdown
index e799f5b8119b..bdaab07454dd 100644
--- a/source/_integrations/steamist.markdown
+++ b/source/_integrations/steamist.markdown
@@ -17,7 +17,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The Steamist will allow you to monitor the state of your [Steamist](https://steamist.com/digital-controls/) steam shower and turn on and off the steam generator.
+The **Steamist** {% term integration %} allows you to monitor the state of your [Steamist](https://steamist.com/digital-controls/) steam shower and turn on and off the steam generator.
 
 ## Supported devices
 
diff --git a/source/_integrations/stiebel_eltron.markdown b/source/_integrations/stiebel_eltron.markdown
index 5d4c2c70ee4d..b7e9cf086858 100644
--- a/source/_integrations/stiebel_eltron.markdown
+++ b/source/_integrations/stiebel_eltron.markdown
@@ -18,7 +18,7 @@ related:
 ha_config_flow: true
 ---
 
-The `stiebel_eltron` {% term integration %} lets you control integral ventilation or heat pump units of [STIEBEL ELTRON](https://www.stiebel-eltron.com).
+The **STIEBEL ELTRON** {% term integration %} lets you control integral ventilation or heat pump units of [STIEBEL ELTRON](https://www.stiebel-eltron.com).
 
 It requires the following components:
 
diff --git a/source/_integrations/stream.markdown b/source/_integrations/stream.markdown
index f4f0b1ac2f86..8cad8559a10d 100644
--- a/source/_integrations/stream.markdown
+++ b/source/_integrations/stream.markdown
@@ -16,7 +16,7 @@ ha_platforms:
 ha_integration_type: system
 ---
 
-The stream {% term integration %} provides a way to proxy live streams through Home Assistant. Most users should not need to configure anything or interface with the integration directly since it is an internal integration used by the [camera integration](/integrations/camera).
+The **Stream** {% term integration %} provides a way to proxy live streams through Home Assistant. Most users should not need to configure anything or interface with the integration directly since it is an internal integration used by the [camera integration](/integrations/camera).
 
 ## Configuration
 
diff --git a/source/_integrations/streamlabswater.markdown b/source/_integrations/streamlabswater.markdown
index 60efd1ecec58..7808c339bcc1 100644
--- a/source/_integrations/streamlabswater.markdown
+++ b/source/_integrations/streamlabswater.markdown
@@ -14,7 +14,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The StreamLabs Water integration is used to interact with [StreamLabs water monitoring devices](https://www.streamlabswater.com/) in order to retrieve usage information and manage the away mode of the device. The [StreamLabs Water API](https://developer.streamlabswater.com) is used to retrieve daily, monthly, and yearly water usage along with the current away mode.
+The **StreamLabs** {% term integration %} is used to interact with [StreamLabs water monitoring devices](https://www.streamlabswater.com/) in order to retrieve usage information and manage the away mode of the device. The [StreamLabs Water API](https://developer.streamlabswater.com) is used to retrieve daily, monthly, and yearly water usage along with the current away mode.
 
 {% important %}
 Access to the StreamLabs Water API is not free, you must have a StreamPlus™ subscription level that enables API access. Visit [https://streamlabswater.com/subscription](https://streamlabswater.com/subscription) for more information.
diff --git a/source/_integrations/subaru.markdown b/source/_integrations/subaru.markdown
index 2288fbb4fed2..2a1f2374fdc5 100644
--- a/source/_integrations/subaru.markdown
+++ b/source/_integrations/subaru.markdown
@@ -20,7 +20,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-This integration retrieves vehicle information and actuates remote services provided by [MySubaru Connected Services](https://www.subaru.com/vehicle-info/connected-services/mysubaru-connected-services.html)(formerly known as Subaru STARLINK). This service is currently only available in the USA and Canada.
+This {% term integration %} retrieves vehicle information and actuates remote services provided by [MySubaru Connected Services](https://www.subaru.com/vehicle-info/connected-services/mysubaru-connected-services.html)(formerly known as Subaru STARLINK). This service is currently only available in the USA and Canada.
 
 This integration requires a telematics equipped Subaru and an active vehicle subscription to the MySubaru service. Before using this integration, you must first register and have login credentials to [MySubaru](https://www.mysubaru.com). 
 
diff --git a/source/_integrations/sun.markdown b/source/_integrations/sun.markdown
index 83458cc391ed..6fee7905c7ff 100644
--- a/source/_integrations/sun.markdown
+++ b/source/_integrations/sun.markdown
@@ -19,7 +19,7 @@ related:
     title: Configuration file
 ---
 
-The sun {% term integration %} calculates all sun-related times (sunrise, sunset, dawn, dusk, etc.) based on your configured home location. This means that all time-based calculations and triggers will be accurate for your specific location, as defined in your [basic configuration](/docs/configuration/basic/).
+The **Sun** {% term integration %} calculates all sun-related times (sunrise, sunset, dawn, dusk, etc.) based on your configured home location. This means that all time-based calculations and triggers will be accurate for your specific location, as defined in your [basic configuration](/docs/configuration/basic/).
 
 The sun {% term integration %} will use the location as
 {% my general title="configured in your Home Assistant configuration" %} to
diff --git a/source/_integrations/supervisord.markdown b/source/_integrations/supervisord.markdown
index a3ed429fe141..9269cfed62e7 100644
--- a/source/_integrations/supervisord.markdown
+++ b/source/_integrations/supervisord.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `supervisord` {% term integration %} allows you to track the states of [Supervisord](http://supervisord.org/).
+The **Supervisord** {% term integration %} allows you to track the states of [Supervisord](http://supervisord.org/).
 
 It required that you enable the HTTP feature in the `/etc/supervisord.conf` configuration file.
 
diff --git a/source/_integrations/supla.markdown b/source/_integrations/supla.markdown
index b1cd6a89348c..0fbe73b23dcb 100644
--- a/source/_integrations/supla.markdown
+++ b/source/_integrations/supla.markdown
@@ -16,7 +16,7 @@ ha_integration_type: integration
 ha_quality_scale: legacy
 ---
 
-The SUPLA {% term integration %} allows you to use [SUPLA](https://supla.org/) devices in Home Assistant.
+The **SUPLA** {% term integration %} allows you to use [SUPLA](https://supla.org/) devices in Home Assistant.
 
 SUPLA-DEV is an open source home automation system for Raspberry Pi, Arduino or ESP8266-based devices. It has its own protocols, firmware and commercially available devices, such as those produced by [Zamel](https://supla.zamel.com/en/).
 
diff --git a/source/_integrations/surepetcare.markdown b/source/_integrations/surepetcare.markdown
index fe13f25eeddb..7648bb0e05ad 100644
--- a/source/_integrations/surepetcare.markdown
+++ b/source/_integrations/surepetcare.markdown
@@ -19,7 +19,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The Sure Petcare {% term integration %} allows you to get information on your Sure Petcare Connect Pet or Cat Flap.
+The **Sure Petcare** {% term integration %} allows you to get information on your Sure Petcare Connect Pet or Cat Flap.
 
 {% include integrations/config_flow.md %}
 
diff --git a/source/_integrations/swiss_hydrological_data.markdown b/source/_integrations/swiss_hydrological_data.markdown
index 82c950b5848d..5f936c34ee31 100644
--- a/source/_integrations/swiss_hydrological_data.markdown
+++ b/source/_integrations/swiss_hydrological_data.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `swiss_hydrological_data` {% term integration %} will show you details (temperature, level, and discharge) of rivers and lakes in Switzerland.
+The **Swiss Hydrological Data** {% term integration %} will show you details (temperature, level, and discharge) of rivers and lakes in Switzerland.
 
 ## Setup
 
diff --git a/source/_integrations/swiss_public_transport.markdown b/source/_integrations/swiss_public_transport.markdown
index d4154be08819..27694b1c58d2 100644
--- a/source/_integrations/swiss_public_transport.markdown
+++ b/source/_integrations/swiss_public_transport.markdown
@@ -15,7 +15,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The Swiss public transport {% term integration %} will give you the next three departure times from a given location to another one in Switzerland.
+The **Swiss public transport** {% term integration %} will give you the next three departure times from a given location to another one in Switzerland.
 
 The [Swiss public transport API](https://transport.opendata.ch/) only allows 1000 requests per 24 hours. The default polling rate is set to `90s`, which is just enough for one connection polling continuously. If more entries are needed, consider [defining a custom polling interval](#defining-a-custom-polling-interval) to reduce the amount of requests.
 
diff --git a/source/_integrations/swisscom.markdown b/source/_integrations/swisscom.markdown
index 3e898680e8ef..267078798f18 100644
--- a/source/_integrations/swisscom.markdown
+++ b/source/_integrations/swisscom.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `swisscom` {% term integration %} offers presence detection by looking at connected devices to an [Internet-Box](https://www.swisscom.ch/en/residential/help/device/internet-router.html) router from [Swisscom](https://www.swisscom.ch) which is an Internet provider in Switzerland.
+The **Swisscom Internet-Box** {% term integration %} offers presence detection by looking at connected devices to an [Internet-Box](https://www.swisscom.ch/en/residential/help/device/internet-router.html) router from [Swisscom](https://www.swisscom.ch) which is an Internet provider in Switzerland.
 
 {% note %}
 There are three models of Internet-Box (light, standard and plus). The platform has only been tested on the Internet-Box plus but the others should work as well because they have the same web interface.
diff --git a/source/_integrations/switchbot.markdown b/source/_integrations/switchbot.markdown
index 5ce94326e265..599b91ad63a3 100644
--- a/source/_integrations/switchbot.markdown
+++ b/source/_integrations/switchbot.markdown
@@ -42,7 +42,7 @@ ha_integration_type: integration
 ha_quality_scale: gold
 ---
 
-The SwitchBot {% term integration %} allows you to control SwitchBot [devices](https://www.switch-bot.com/) such as sensors, locks, shades, lights, plugs, robot vacuums, hubs and etc.
+The **SwitchBot Bluetooth** {% term integration %} allows you to control SwitchBot [devices](https://www.switch-bot.com/) such as sensors, locks, shades, lights, plugs, robot vacuums, hubs and etc.
 
 ## How you can use this integration
 
diff --git a/source/_integrations/switchbot_cloud.markdown b/source/_integrations/switchbot_cloud.markdown
index 990ba3111467..044efc9e9995 100644
--- a/source/_integrations/switchbot_cloud.markdown
+++ b/source/_integrations/switchbot_cloud.markdown
@@ -39,7 +39,7 @@ ha_config_flow: true
 ha_integration_type: hub
 ---
 
-The SwitchBot Cloud {% term integration %} allows you to control SwitchBot [devices](https://www.switch-bot.com/) connected through the SwitchBot hub.
+The **SwitchBot Cloud** {% term integration %} allows you to control SwitchBot [devices](https://www.switch-bot.com/) connected through the SwitchBot hub.
 
 ## Prerequisites
 
diff --git a/source/_integrations/switcher_kis.markdown b/source/_integrations/switcher_kis.markdown
index e000d8725b5c..04f4f60b647f 100644
--- a/source/_integrations/switcher_kis.markdown
+++ b/source/_integrations/switcher_kis.markdown
@@ -25,7 +25,7 @@ ha_integration_type: integration
 ha_quality_scale: silver
 ---
 
-This `Switcher` integration allows you to control your [Switcher Devices](https://www.switcher.co.il/).
+The **Switcher** {% term integration %} allows you to control your [Switcher Devices](https://www.switcher.co.il/).
 
 Supported devices:
 
diff --git a/source/_integrations/switchmate.markdown b/source/_integrations/switchmate.markdown
index 67eecbce6de5..08da50118578 100644
--- a/source/_integrations/switchmate.markdown
+++ b/source/_integrations/switchmate.markdown
@@ -15,7 +15,7 @@ ha_integration_type: integration
 ha_quality_scale: legacy
 ---
 
-This `Switchmate` switch platform allows you to control Switchmate [devices]( https://www.mysimplysmarthome.com/products/switchmate-switches/).
+The **Switchmate SimplySmart Home** {% term integration %} allows you to control Switchmate [devices](https://www.mysimplysmarthome.com/products/switchmate-switches/).
 
 ## Configuration
 
diff --git a/source/_integrations/syncthru.markdown b/source/_integrations/syncthru.markdown
index 714428cafd65..05e8004802b6 100644
--- a/source/_integrations/syncthru.markdown
+++ b/source/_integrations/syncthru.markdown
@@ -17,7 +17,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The Samsung SyncThru Printer platform allows Home Assistant to read current data from a local Samsung printer.  
+The **Samsung SyncThru Printer** {% term integration %} allows Home Assistant to read current data from a local Samsung printer.  
 
 Depending on device abilities, the following separate sensors are created if supported:
 
diff --git a/source/_integrations/synology_chat.markdown b/source/_integrations/synology_chat.markdown
index fda6d0dbb5dc..ea530eecc487 100644
--- a/source/_integrations/synology_chat.markdown
+++ b/source/_integrations/synology_chat.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `synology_chat` notification {% term integration %} allows you to deliver notifications to your [Synology Chat](https://www.synology.com/en-us/dsm/feature/chat) install as a Synology Chat bot.
+The **Synology Chat** {% term integration %} allows you to deliver notifications to your [Synology Chat](https://www.synology.com/en-us/dsm/feature/chat) install as a Synology Chat bot.
 
 To configure a Synology Chat bot, first you must create a [Synology Chat Integration Incoming Webhook](https://www.synology.com/en-us/knowledgebase/DSM/tutorial/Collaboration/How_to_configure_webhooks_and_slash_commands_in_Chat_Integration#t2.1). After this is complete, you will have a Webhook URL. This is what will be required in the Home Assistant configuration.
 
diff --git a/source/_integrations/synology_dsm.markdown b/source/_integrations/synology_dsm.markdown
index cbae408a40b4..584f5577cdff 100644
--- a/source/_integrations/synology_dsm.markdown
+++ b/source/_integrations/synology_dsm.markdown
@@ -29,7 +29,7 @@ ha_integration_type: device
 ha_zeroconf: true
 ---
 
-The Synology DSM {% term integration %} provides access to various statistics from your [Synology NAS](https://www.synology.com) (_DSM 5.x and higher_), as well as cameras from the [Surveillance Station](https://www.synology.com/surveillance) and will allow to use the [File Station](https://www.synology.com/en-us/dsm/feature/file_sharing) as a {% term backup %} location.
+The **Synology DSM** {% term integration %} provides access to various statistics from your [Synology NAS](https://www.synology.com) (_DSM 5.x and higher_), as well as cameras from the [Surveillance Station](https://www.synology.com/surveillance) and will allow to use the [File Station](https://www.synology.com/en-us/dsm/feature/file_sharing) as a {% term backup %} location.
 
 {% include integrations/config_flow.md %}
 
diff --git a/source/_integrations/syslog.markdown b/source/_integrations/syslog.markdown
index b453edfc4785..fd9303655183 100644
--- a/source/_integrations/syslog.markdown
+++ b/source/_integrations/syslog.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `syslog` {% term integration %} allows you to deliver notifications from Home Assistant to the local syslog.
+The **Syslog** {% term integration %} allows you to deliver notifications from Home Assistant to the local syslog.
 
 To enable syslog notifications in your installation, add the following to your {% term "`configuration.yaml`" %} file.
 {% include integrations/restart_ha_after_config_inclusion.md %}
diff --git a/source/_integrations/system_health.markdown b/source/_integrations/system_health.markdown
index 8064c03e7eeb..9c8835b860bd 100644
--- a/source/_integrations/system_health.markdown
+++ b/source/_integrations/system_health.markdown
@@ -9,7 +9,7 @@ ha_domain: system_health
 ha_integration_type: system
 ---
 
-The System Health {% term integration %} provides an API to offer information on the system and its components. It also allows to run diagnostic tools to diagnose problems.
+The **System Health** {% term integration %} provides an API to offer information on the system and its components. It also allows to run diagnostic tools to diagnose problems.
 
 System Health integration data can be viewed at **Settings** -> **System** -> **Repairs** -> **System Information** in the three dots menu (top right).